CVS log for src/sys/dev/pcmcia/if_ray.c

Up to [cvs.NetBSD.org] / src / sys / dev / pcmcia

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Fix few more typos in comments and log message:
s/butoon/button/
s/BUTTOM/BOTTOM/
s/communicaiton/communication/
s/recevice/receive/
s/regiion/region/

fix various small typos, mainly in comments.

Mostly merge changes from HEAD upto 20200411

Merge changes from current as of 20200406

Sync with head.

Use ifmedia_fini().

Adopt <net/if_stats.h>.

Pull up following revision(s) (requested by msaitoh in ticket #662):

	sys/dev/pcmcia/if_xi.c: revision 1.93
	sys/arch/x86/pci/if_vmx.c: revision 1.54
	sys/dev/pci/if_de.c: revision 1.165
	sys/arch/arm/ti/if_cpsw.c: revision 1.10
	sys/arch/arm/omap/if_cpsw.c: revision 1.26
	sys/dev/isa/if_iy.c: revision 1.112
	sys/dev/pcmcia/if_ray.c: revision 1.96

Add ETHER_LOCK() and ETHER_UNLOCK() to protect ec_multiaddrs.

XXX These drivers don't check whether enm_addrlo and enm_addrhi are the same
or not, so it won't work correctly if an multicast address entry has a range.

Protect ec_multicnt.

Protect ec_multicnt.

Pull up following revision(s) (requested by msaitoh in ticket #1416):

	sys/dev/ic/i82586.c: revision 1.86
	sys/arch/arm/ep93xx/epe.c: revision 1.45
	sys/dev/pcmcia/if_cnw.c: revision 1.66
	sys/arch/mac68k/nubus/if_netdock_nubus.c: revision 1.31
	sys/dev/qbus/if_il.c: revision 1.36
	sys/dev/pcmcia/if_ray.c: revision 1.95
	sys/dev/qbus/if_qt.c: revision 1.24

if_percpuq(9) automatically increments if_ipackets, so don't increment it in
the driver itself to prevent double count.

Pull up following revision(s) (requested by msaitoh in ticket #371):

	sys/dev/ic/i82586.c: revision 1.86
	sys/arch/arm/ep93xx/epe.c: revision 1.45
	sys/dev/pcmcia/if_cnw.c: revision 1.66
	sys/arch/mac68k/nubus/if_netdock_nubus.c: revision 1.31
	sys/arch/arm/sunxi/sunxi_can.c: revision 1.2
	sys/dev/qbus/if_il.c: revision 1.36
	sys/dev/pcmcia/if_ray.c: revision 1.95
	sys/dev/qbus/if_qt.c: revision 1.24

 if_ipackets is incremented in can_input(), so don't increment it in
sunxi_can_rx_intr to prevent double count. OK'd by bouyer@.

 if_percpuq(9) automatically increments if_ipackets, so don't increment it in
the driver itself to prevent double count.

 if_percpuq(9) automatically increments if_ipackets, so don't increment it in
the driver itself to prevent double count.

Sync with HEAD

 Use ETHER_LOCK()/ETHER_UNLOCK() for all ethernet drivers to protect ec_multi*.

-No functional change:
  - KNF
  - u_int*_t -> uint*_t.

- add or adjust /* FALLTHROUGH */ where appropriate
- add __unreachable() after functions that can return but won't in
  this case, and thus can't be marked __dead easily

Synch with HEAD

 Whitespace fix.

Sync with HEAD

Pull up following revision(s) (requested by msaitoh in ticket #938):
	sys/arch/acorn32/podulebus/if_ie.c: revision 1.41
	sys/arch/amiga/dev/if_es.c: revision 1.58
	sys/arch/amiga/dev/if_qn.c: revision 1.45
	sys/arch/arm/at91/at91emac.c: revision 1.20
	sys/arch/arm/ep93xx/epe.c: revision 1.37
	sys/arch/emips/ebus/if_le_ebus.c: revision 1.14
	sys/arch/emips/ebus/if_le_ebus.c: revision 1.15
	sys/arch/mac68k/dev/if_mc.c: revision 1.46
	sys/arch/macppc/dev/am79c950.c: revision 1.39
	sys/arch/newsmips/apbus/if_sn.c: revision 1.40
	sys/arch/next68k/dev/mb8795.c: revision 1.59
	sys/arch/playstation2/dev/if_smap.c: revision 1.25
	sys/arch/playstation2/dev/if_smap.c: revision 1.26
	sys/arch/sun2/dev/if_ec.c: revision 1.28
	sys/arch/sun3/dev/if_ie.c: revision 1.63
	sys/arch/x68k/dev/if_ne_intio.c: revision 1.19
	sys/arch/xen/xen/if_xennet_xenbus.c: revision 1.75
	sys/arch/xen/xen/xennetback_xenbus.c: revision 1.63
	sys/dev/bi/if_ni.c: revision 1.45
	sys/dev/cadence/if_cemac.c: revision 1.12
	sys/dev/ic/am7990.c: revision 1.78
	sys/dev/ic/am79900.c: revision 1.27
	sys/dev/ic/an.c: revision 1.67
	sys/dev/ic/cs89x0.c: revision 1.40
	sys/dev/ic/dm9000.c: revision 1.13
	sys/dev/ic/dm9000.c: revision 1.14
	sys/dev/ic/dp8390.c: revision 1.88
	sys/dev/ic/elink3.c: revision 1.141
	sys/dev/ic/elinkxl.c: revision 1.122
	sys/dev/ic/hme.c: revision 1.98
	sys/dev/ic/i82586.c: revision 1.77
	sys/dev/ic/lance.c: revision 1.53
	sys/dev/ic/mb86950.c: revision 1.27
	sys/dev/ic/mb86960.c: revision 1.86
	sys/dev/ic/mtd803.c: revision 1.34
	sys/dev/ic/pdq_ifsubr.c: revision 1.59
	sys/dev/ic/rrunner.c: revision 1.86
	sys/dev/ic/seeq8005.c: revision 1.58
	sys/dev/ic/sgec.c: revision 1.47
	sys/dev/ic/smc90cx6.c: revision 1.72
	sys/dev/ic/smc91cxx.c: revision 1.96
	sys/dev/ic/tropic.c: revision 1.49
	sys/dev/ic/wi.c: revision 1.245
	sys/dev/isa/if_eg.c: revision 1.93
	sys/dev/isa/if_el.c: revision 1.95
	sys/dev/isa/if_iy.c: revision 1.101
	sys/dev/ofw/ofnet.c: revision 1.58
	sys/dev/pci/if_alc.c: revision 1.27
	sys/dev/pci/if_de.c: revision 1.152
	sys/dev/pci/if_fpa.c: revision 1.61
	sys/dev/pci/if_jme.c: revision 1.34
	sys/dev/pci/if_tl.c: revision 1.108
	sys/dev/pci/if_vte.c: revision 1.19
	sys/dev/pci/ixgbe/ixgbe.h: revision 1.50
	sys/dev/pcmcia/if_cnw.c: revision 1.62
	sys/dev/pcmcia/if_malo_pcmcia.c: revision 1.17
	sys/dev/pcmcia/if_ray.c: revision 1.89
	sys/dev/pcmcia/if_xi.c: revision 1.81
	sys/dev/pcmcia/mhzc.c: revision 1.51
	sys/dev/pcmcia/xirc.c: revision 1.34
	sys/dev/qbus/if_de.c: revision 1.33
	sys/dev/qbus/if_qe.c: revision 1.78
	sys/dev/qbus/if_qt.c: revision 1.22
	sys/dev/sbus/be.c: revision 1.87
	sys/dev/sbus/qe.c: revision 1.68
	sys/dev/scsipi/if_se.c: revision 1.96
	sys/dev/usb/if_atu.c: revision 1.59
	sys/net/if_l2tp.c: revision 1.28 via patch
	sys/net/if_ppp.c: revision 1.160
It's not required to include net/bpfdesc.h. Remove it.
--
Simplify like other drivers. NULL check of ifp->if_bpf is done in
bpf_mtap(), so it's not required to do it here.
--
Remove duplicated inclusion of net/bpf.h.
--
Remove duplicated inclusion of net/bpf.h.
--
Simplify bpf_mtap() call. No functional change.

 Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.

 This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.

Sync with HEAD

 It's not required to include net/bpfdesc.h. Remove it.

adjust for printf signature.

coalesce the two copies of hexdump into libkern

update from HEAD

Sync with HEAD

Sync with HEAD

Remove more dead code

RAY_DEF_NWID is a constant string and so is the length, it's
pointless the length is larger than zero.

Remove dead code. RAY_DEF_NWID is a constant string, its length will never
be above 32.

Sync with HEAD

KNF. Remove extra spaces. No functional change.

Introduce m_set_rcvif and m_reset_rcvif

The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.

No functional change.

Sync with HEAD

Introduce softint-based if_input

This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.

This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.

To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.

Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html

Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!

resync with head

sync with (a bit old) head

Pull up following revision(s) (requested by msaitoh in ticket #747):
	sys/dev/pcmcia/if_ray.c: revision 1.81
Apply OpenBSD rev. 1.40:
  > Use the actual SSID length rather than a (wrong) sizeof. Makes gcc4
  > -Wbounded happy.
  >
  > ok kettenis

Apply OpenBSD rev. 1.40:
 > Use the actual SSID length rather than a (wrong) sizeof. Makes gcc4
 > -Wbounded happy.
 >
 > ok kettenis

Resync to 2012-11-19 00:00:00 UTC

sync with head

split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

sync with head.

sync with head

Sync with HEAD.

Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.

sync with head

Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client.  This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached.  However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff.  ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.

Simplify device-activation hooks.

sync with head

Invert logic around nested pmf(9) registrations for readability.

sync with head

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

struct device * -> device_t, no functional changes intended.

struct cfdata * -> cfdata_t, no functional changes intended.

sync with head.

Sync with HEAD.

ANSIfy another 1261 function definitions.
The only ones left in sys are beyond by sed script!
(or in sys/dist or sys/external)
Mostly they have function pointer parameters.

Change about 4500 of the K&R function definitions to ANSI ones.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)

Sync with HEAD.

Sync with HEAD.

Update haad-dm branch to haad-dm-base2.

*** Summary ***

When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.

Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address.  (Thanks matt@.)

Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior.  Make network drivers share more code.

Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.

Return consistent, appropriate error codes from network drivers.

Improve readability.  KNF.

*** Details ***

In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.

In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.

Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR.  In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr.  That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR.  In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.

In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.

Pull device initialization out of switch statements under
SIOCINITIFADDR.  For example, pull ..._init() out of any switch
statement that looks like this:

        switch (...->sa_family) {
        case ...:
                ..._init();
                ...
                break;
        ...
        default:
                ..._init();
                ...
                break;
        }

Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,

        switch (x & (IFF_UP|IFF_RUNNING)) {
        case 0:
                ...
                break;
        case IFF_RUNNING:
                ...
                break;
        case IFF_UP:
                ...
                break;
        case IFF_UP|IFF_RUNNING:
                ...
                break;
        }

unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).

In ipw(4), remove an if_set_sadl() call that is out of place.

In nfe(4), reuse the jumbo MTU logic in ether_ioctl().

Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure.  Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.

Return ENOTTY instead of EINVAL for inappropriate ioctls.  In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.

Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source.  In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.

Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively.  Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.

In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.

Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.

In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.

Let ifioctl_common() handle SIOCGIFADDR.

Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.

In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.

bzero -> memset.  Delete unnecessary casts to void *.  Use
sockaddr_in_init() and sockaddr_in6_init().  Compare pointers with
NULL instead of "testing truth".  Replace some instances of (type
*)0 with NULL.  Change some K&R prototypes to ANSI C, and join
lines.

Sync with HEAD.

use aprint_*_dev and device_xname

Sync with HEAD.

sync with head.

sync with HEAD

sync with head.

Adjust a debug message. Fixes the last bit of PR 29668. (The rest seems
to have already been dealt with.)

sync with head

sync with HEAD

Sync with head.

sync with head.

Merge jmcneill-pm branch.

Rename pnp(9) -> pmf(9), as requested by many.

sync with HEAD

Refactor PNP API:
- Make suspend/resume directly a device functionality. It consists of
  three layers (class logic, device logic, bus logic), all of them being
  optional. This replaces D0/D3 transitions.
- device_is_active returns true if the device was not disabled and was
  not suspended (even partially), device_is_enabled returns true if the
  device was enabled.
- Change pnp_global_transition into pnp_system_suspend and
  pnp_system_resume. Before running any suspend/resume handlers, check
  that all currently attached devices support power management and bail
  out otherwise. The latter is not done for the shutdown/panic case.
- Make the former bus-specific generic network handlers a class handler.
- Make PNP message like volume up/down/toogle PNP events. Each device
  can register what events they are interested in and whether the handler
  should be global or not.
- Introduce device_active API for devices to mark themselve in use from
  either the system or the device. Use this to implement the idle handling
  for audio and input devices. This is intended to replace most ad-hoc
  watchdogs as well.
- Fix somes situations in which audio resume would lose mixer settings.
- Make USB host controllers better deal with suspend in the light of
  shared interrupts.
- Flush filesystem cache on suspend.
- Flush disk caches on suspend. Put ATA disks into standby on suspend as
  well.
- Adopt drivers to use the new PNP API.
- Fix a critical bug in the generic cardbus layer that made D0->D3
  break.
- Fix ral(4) to set if_stop.
- Convert cbb(4) to the new PNP API.
- Apply the PCI Express SCI fix on resume again.

sync with head.

Sync with HEAD.

Follow the merge of pmap.c on i386 and amd64 and move
pmap_init_tmp_pgtbl into arch/x86/x86/pmap.c. Modify the ACPI wakeup
code to restore CR4 before jumping back into kernel space as the large
page option might cover that.

Sync with HEAD.

Sync with head.

machine/{bus,cpu,intr}.h -> sys/{bus,cpu,intr}.h

Sync with head.

Convert ray(4) to new power management API.

Sync with HEAD.

sync with head.

Sync with HEAD.

Change a bazillion occurrences of code resembling this,

	error = (cmd == SIOCADDMULTI) ?
	    ether_addmulti(ifr, &sc->sc_ec) :
	    ether_delmulti(ifr, &sc->sc_ec);

	if (error == ENETRESET) {

to this,

	if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {

which does the same thing.

(A bazillion is a very large number.  This seems to make the i386
ALL kernel smaller by 3kB to 4kB.)

Use ifreq_getaddr() twice in es(4).

Whitespace nits.

Sync with head.

Merge some of the less invasive changes from the vmlocking branch:

- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements

Adapt to callout API change.

Sync with HEAD.

Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

sync with head.

sync with head.

Sync with head.

__unused removal on arguments; approved by core.

sync with head

- sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386

Add "name" parameter to powerhook_establish, to aid debugging. No objections
on tech-kern@

sync with head

sync with head.

Merge 2006-05-24 NetBSD-current into the "peter-altq" branch.

sync with head.

Sync with head.

sync with head.

Coverity CID 1111: Fix cut'n'paste bug!

merge ktrace-lwp.

Sync with HEAD. Here we go again...

Pull up following revision(s) (requested by kiyohara in ticket #767):
	sys/dev/pcmcia/if_ray.c: revision 1.58
fix compilation with debugging on.

fix compilation with debugging on.

- add const
- avoid variable shadow
- do proper UNCONST with XXXUNCONST

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

nuke trailing whitespace

sync with head.

Sync with HEAD.

de-__P

Pull up revision 1.54 (requested by thorpej in ticket #939):
  When adding or deleting multicast addresses, only change
  the address filter if the interface is marked RUNNING.
  Fixes PR#27678.

Sync with HEAD.

When adding/deleting multicast addresses, only whack the address
filter if the interface is marked RUNNING.

Fixes kern/27678.

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD.

Now that all the silly string printing is gone, move the location where we
print a newline so it doesn't have to be done in every driver.

Print diagnostics in only one place if intr_establish() or function_enable()
fails.

Also, be a little more careful about passing up error values, and consistently
clear our interrupt handler pointer.

Better fix for the previous.

Fix a reference count problem I introduced here.

Use pcmcia_function_{configure,unconfigure}().

Adapt to the new world order.

Correct the intr_establish order here.

Clean up attach messages.

Sync with HEAD

More cleanup:
* Print "devinfo" in a canonial place (like we do in the SCSI code).
* Use aprint_{error,normal}() during attach.
* More PCMCIA_STR_* removal.

Fix some typos. From Tom Cosgrove via jmc@openbsd.

Eliminate bogus initializer.

uninitialized variables

Initialize variables sooner, and remove variable that was only used
uninitialized in a debugging printf.

Fix uninitialized variable warnings

Typo in comment. From OpenBSD.

Switch to the new 802.11 layer.

Remove assigned-to but not used variable.

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

Add trailing ; to CFATTACH_DECL.

Use CFATTACH_DECL().

Declare all cfattach structures const.

catch up with -current on kqueue branch

catch up with -current.

Catch up to -current.

SIMPLEQ rototill:
- implement SIMPLEQ_REMOVE(head, elm, type, field).  whilst it's O(n),
  this mirrors the functionality of SLIST_REMOVE() (the other
  singly-linked list type) and FreeBSD's STAILQ_REMOVE()
- remove the unnecessary elm arg from SIMPLEQ_REMOVE_HEAD().
  this mirrors the functionality of SLIST_REMOVE_HEAD() (the other
  singly-linked list type) and FreeBSD's STAILQ_REMOVE_HEAD()
- remove notes about SIMPLEQ not supporting arbitrary element removal
- use SIMPLEQ_FOREACH() instead of home-grown for loops
- use SIMPLEQ_EMPTY() appropriately
- use SIMPLEQ_*() instead of accessing sqh_first,sqh_last,sqe_next directly
- reorder manual page; be consistent about how the types are listed
- other minor cleanups

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Catch up with -current.

Remove RAY_USE_AMEM. This option claimed to use attribute memory access
for the registers, which was true, but actually the same as the driver
did without this option.

What it realy did is work around a stupid bug in the driver that did not
use the "offset" result from the pcmcia_mem_map call mapping the CIS memory.

We got away with this for a long time since on i386 and typical pcmcia
bridged the offset returned will be 0. It always failed (without
RAY_USE_AMEM=1) if the check for a different function CCR aliases in pcmcia.c
failed and mapped the CCR base new - this time at the CCR base of this
function (0xf00), so all register acceses (that had 0xf00 added) happened
way off in neverland.

Now we do not hardcode the CCR base to the register definitions, but
instead use the offset returned by pcmcia_mem_map. This makes the driver
work with and without CCR base aliases being found.

Sync kqueue branch with -current.

Catch up to -current.

To make dev/pcmcia work on platforms with 64-bit bus_addr_t and
32-bit bus_size_t (sparc), change the pcmcia_mem_map(9) offsetp
argument to bus_size_t as it is used as a bus_space offset.

Fix typo in comment.

Catch up to -current.

add RCSIDs

Catch up with -current.

update to -current

aquired -> acquired, issueing -> issuing

Pull up revision 1.26 (requested by mjacob):
  Cast pktlen to u_long and print with %ld. Now it compiles on the alpha.

Sync with HEAD

Pull up revisions 1.24-1.25 (requested by thorpej):
  Add a missing return after freeing an mbuf.
  Add support for 802.11 authentication frames, required to
  interoperate with Aviator Pro cards on Windows.

ALTQ'ify.

Sync with HEAD (for UBC fixes).

Make this compile again.  *sigh*

Add a missing return after freeing an mbuf.  From Dave Huang <khym@bga.com>.

Add support for 802.11 authentication frames, required to interoperate
with Aviator Pro cards on Windows.  Written by Steve Weiss for OpenBSD,
ported to NetBSD by me.

Sync with HEAD.

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

file if_ray.c was added on branch thorpej_scsipi on 2000-11-20 11:42:43 +0000

Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().

Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).

Pullups 802.11 stuff (approved by jhawk)
- allow non-string nwid settings
	basesrc/sbin/ifconfig/ifconfig.c		1.82-1.86
	basesrc/sbin/ifconfig/ifconfig.8		1.37
	syssrc/sys/dev/ic/awi.c				1.21
	syssrc/sys/dev/pcmcia/if_ray.c			1.21
	syssrc/sys/dev/pcmcia/if_wi.c			1.23
	syssrc/sys/dev/pcmcia/if_wivar.h		1.10
	syssrc/sys/net/if_ieee80211.h			1.4

change the argument of SIOCS80211NWID and SIOCG80211NWID ioctls from
u_int8_t array to struct ieee80211_nwid to prepend length field.
The length field is necessary because IEEE 802.11 spec doesn't prohibit
even '\0' for SSID.
Though the name and the value of SIOC... macro is unchanged, this change
breaks binary compatibility.  The only affected userland program on the
tree is ifconfig(8).
As Jason suggested on tech-net, it is better than live with problems
since there are no releases for this ioctls yet.

Sync w/ netbsd-1-5-base.

For all network drivers that call ether_ifattach(), and also
have _detach() functions:
  Ensure that softc keeps state about whether the attach succeeded,
  and make the detach function return immediately if the attach did
  not complete.

Make sure the payload is aligned when using E2-over-802.11 encapsulation,
as enabled by the LINK0 flag.  Fixes PR kern/9700.

Cast timeval members to types we know the printf conversions of.

New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.

Adopt the macro name change of if_ieee80211.h.
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.

Add missing break that hosed multicast.

Add code (off by default) to keep track of the signal strength of the last
few packets received from different MAC addresses.

Fix printf formats on the Alpha.

Use pcmcia_devinfo().

enable the card before establishing the interrupt to avoid being called
	with stray interrupts before we are ready.
clear the card interrupt after enabling the card

wrap optimized copy routines in an ifdef

manipulate packet counters, support detach, and add commented out code to
	DTRT on suspend

Get rid of shutdown hook and attached media on detach.

Make ray driver detachable.

Make it easy to switch between using attribute memory and not.

Print out what kind of card it is earlier and more accurately.

set havenet to 0 when we are switching between operating modes and only
after association in ifrastructure mode.  Also, deal with roam start
and rejoin net commands.

support switching to/from adhoc/infrastructure mode with media opt.
fill in 802.11 correctly for 802.11 infrastructure.
code not verified with base station yet.

Add missing \n in attach message, and add a little more information.

add driver for raylink/aviator wireless 802.11 FH 2Mbps cards, currently only
tested with aviator 2.4