Up to [cvs.NetBSD.org] / src / sys / dev / pci / ixgbe
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
Pull up the following revisions, requestes by msaitoh in ticket #1746: sys/dev/pci/ixgbe/ix_txrx.c 1.95 sys/dev/pci/ixgbe/ixgbe.c 1.261,1.263, 1.265-1.268,1.273, 1.275-1.277,1.305, 1.312, 1.316-1.321 via patch sys/dev/pci/ixgbe/ixgbe.h 1.85 via patch sys/dev/pci/ixgbe/ixgbe_mbx.c 1.19 sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.15-1.16 sys/dev/pci/ixgbe/ixgbe_type.h 1.46-1.47 sys/dev/pci/ixgbe/ixgbe_x550.c 1.26 sys/dev/pci/ixgbe/ixv.c 1.178,1.182 via patch - Reduce code duplication between ixgbe_msix_admin() and ixgbe_legacy_irq(). - Add missing code which was not in ixgbe_msix_admin() from ixgbe_legacy_irq() and vice versa. - Reorder code. - Disable/enable the OTHER interrupts correctly. - Don't return in the middle of ixgbe_msix_admin() when an flow director reinit failed. NetBSD currently doesn't support flow director, so this is not a real bug. - Print ECC, PHY and temp error log using with ratecheck(). - Correctly re-enable queue interrupt in ixgbe_legacy_irq(). - Correctly enter the recovery mode. - No functional change: - Add some debug printf()s. - Don't use "more" flag for simplify. - Use macro. - Fix typos in comment. - KNF.
Pull up the following revisions (requested by msaitoh in ticket #1424): sys/dev/pci/ixgbe/ix_txrx.c 1.95 sys/dev/pci/ixgbe/ixgbe.c 1.305 via patch sys/dev/pci/ixgbe/ixgbe_mbx.c 1.19 sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.15-1.16 sys/dev/pci/ixgbe/ixv.c 1.178 via patch Use atomic_{load,store}_relaxed() for event counters.
Pull up following revision(s) (requested by msaitoh in ticket #1730): sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.19 sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.31 sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.23 sys/dev/pci/ixgbe/if_sriov.c: revision 1.17 sys/dev/pci/ixgbe/ixv.c: revision 1.172 sys/dev/pci/ixgbe/ixv.c: revision 1.173 sys/dev/pci/ixgbe/ixgbe.c: revision 1.301 sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.55 sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.29 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.16 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.17 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.18 Add code to support API version 1.5. No functional change. - This change adds almost all code to support API 1.5 except real negotiation and upgrade mailbox functions. - From ix-3.3.18, ix-3.3.22 and ixv-1.5.24. Enable mailbox API 1.5 support. Tested on ESXi with ixgben 1.10.3.0. Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_vf(). Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_pf().
Pull up following revision(s) (requested by msaitoh in ticket #1416): sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.19 sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.31 sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.23 sys/dev/pci/ixgbe/if_sriov.c: revision 1.17 sys/dev/pci/ixgbe/ixv.c: revision 1.172 sys/dev/pci/ixgbe/ixv.c: revision 1.173 sys/dev/pci/ixgbe/ixgbe.c: revision 1.301 sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.55 sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.29 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.16 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.17 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.18 Add code to support API version 1.5. No functional change. - This change adds almost all code to support API 1.5 except real negotiation and upgrade mailbox functions. - From ix-3.3.18, ix-3.3.22 and ixv-1.5.24. Enable mailbox API 1.5 support. Tested on ESXi with ixgben 1.10.3.0. Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_vf(). Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_pf().
Pull up the following, requested by msaitoh in ticket #1729: sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16 sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch sys/dev/pci/ixgbe/ixgbe.h 1.84 sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18 sys/dev/pci/ixgbe/ixgbe_82598.h 1.9 sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28 sys/dev/pci/ixgbe/ixgbe_82599.h 1.8 sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27 sys/dev/pci/ixgbe/ixgbe_api.h 1.16 sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3 sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42 sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16 sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13 sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12 sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11 sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8 sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4 sys/dev/pci/ixgbe/ixgbe_features.h 1.4 sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15 sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18 sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5 sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8 sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31 sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29 sys/dev/pci/ixgbe/ixgbe_phy.h 1.13 sys/dev/pci/ixgbe/ixgbe_rss.h 1.6 sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5 sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54 sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29 sys/dev/pci/ixgbe/ixgbe_vf.h 1.15 sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22 sys/dev/pci/ixgbe/ixgbe_x540.h 1.10 sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25 sys/dev/pci/ixgbe/ixgbe_x550.h 1.7 sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch - Add typecast for type mismatch. - Fix retry count calculation of I2C read/write. - Wait longer for link after fiber MAC setup. - ixv(4): Use adapter->mta for the multicast array memory instead of the on-stack array. - Match X550_PHY_ID correctly on X550. - Print NVM image version on 82598. - Use 64bit for lxon + lxoff. - Don't expose garbage data of hw.ixvN.debug. - Some NetBSD unrelated changes: - Fix infinite recursion on PCIe link down if VMDQ is used. - Move PF mailbox initialization from ixgbe_attach() to ixgbe_init_iov(). - Add IPv6 mask for flow director. - Change error level in ixgbe_fc_autoneg(). - Check host interface return status when writing NVM. - Change DCB credit parameters. - Restore some mailbox related functions. Revert part of ixgbe_mbx.c rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change. - Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change. - Remove unused argument. Change argument. - Remove unnecessary return value check. - Remove debug error message. - Remove dead code. - Add some unused macros. - Fix typo in comment. - Rename some functions. - Sort lines, modify comment. - Whitespace fix.
Pull up the following revisions, requested by msaitoh in ticket #1414: sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16 sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch sys/dev/pci/ixgbe/ixgbe.h 1.84 sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18 sys/dev/pci/ixgbe/ixgbe_82598.h 1.9 sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28 sys/dev/pci/ixgbe/ixgbe_82599.h 1.8 sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27 sys/dev/pci/ixgbe/ixgbe_api.h 1.16 sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3 sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42 sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16 sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13 sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12 sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11 sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8 sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4 sys/dev/pci/ixgbe/ixgbe_features.h 1.4 sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15 sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18 sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5 sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8 sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31 sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29 sys/dev/pci/ixgbe/ixgbe_phy.h 1.13 sys/dev/pci/ixgbe/ixgbe_rss.h 1.6 sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5 sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54 sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29 sys/dev/pci/ixgbe/ixgbe_vf.h 1.15 sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22 sys/dev/pci/ixgbe/ixgbe_x540.h 1.10 sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25 sys/dev/pci/ixgbe/ixgbe_x550.h 1.7 sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch - Add typecast for type mismatch. - Fix retry count calculation of I2C read/write. - Wait longer for link after fiber MAC setup. - ixv(4): Use adapter->mta for the multicast array memory instead of the on-stack array. - Match X550_PHY_ID correctly on X550. - Print NVM image version on 82598. - Use 64bit for lxon + lxoff. - Don't expose garbage data of hw.ixvN.debug. - Some NetBSD unrelated changes: - Fix infinite recursion on PCIe link down if VMDQ is used. - Move PF mailbox initialization from ixgbe_attach() to ixgbe_init_iov(). - Add IPv6 mask for flow director. - Change error level in ixgbe_fc_autoneg(). - Check host interface return status when writing NVM. - Change DCB credit parameters. - Restore some mailbox related functions. Revert part of ixgbe_mbx.c rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change. - Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change. - Remove unused argument. Change argument. - Remove unnecessary return value check. - Remove debug error message. - Remove dead code. - Add some unused macros. - Fix typo in comment. - Rename some functions. - Sort lines, modify comment. - Whitespace fix.
Use atomic_{load,store}_relaxed() for event counters.
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_pf().
Don't clear mailbox related counters in ixgbe_upgrade_mbx_params_vf().
Add code to support API version 1.5. No functional change. - This change adds almost all code to support API 1.5 except real negotiation and upgrade mailbox functions. - From ix-3.3.18, ix-3.3.22 and ixv-1.5.24.
Restore some mailbox related functions. No functional change. - Revert some part of ixgbe_mbx.c rev. 1.7 and ixgbe_mbx.h rev. 1.11. It's also part of FreeBSD 3f66b96d8658f8721e6b1c6f035611bec44675b9. - This change reduces diff against FreeBSD ix-3.3.14.
Update copyright to 2020. FreeBSD: 8455e365f77f5b66ac9521dbcd690f79345ce147
Whitespace fix. Sync with FreeBSD ix-3.3.14.
Pull up the following (all via patch), requested by msaitoh in ticket #1696: sysdev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch sysdev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch sysdev/pci/ixgbe/ix_txrx.c 1.68-1.93 sysdev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch sysdev/pci/ixgbe/if_bypass.c 1.7-1.9 sysdev/pci/ixgbe/if_fdir.c 1.4-1.5 sysdev/pci/ixgbe/if_sriov.c 1.10-1.11 sysdev/pci/ixgbe/ixgbe_82598.c 1.16 sysdev/pci/ixgbe/ixgbe_82599.c 1.23 sysdev/pci/ixgbe/ixgbe_api.c 1.25 sysdev/pci/ixgbe/ixgbe_bypass.h 1.2 sysdev/pci/ixgbe/ixgbe_common.c 1.30-1.33 sysdev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11 sysdev/pci/ixgbe/ixgbe_dcb.h 1.7 sysdev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9 sysdev/pci/ixgbe/ixgbe_dcb_82598.h 1.7 sysdev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9 sysdev/pci/ixgbe/ixgbe_dcb_82599.h 1.7 sysdev/pci/ixgbe/ixgbe_fdir.h 1.3 sysdev/pci/ixgbe/ixgbe_features.h 1.3 sysdev/pci/ixgbe/ixgbe_mbx.c 1.12 sysdev/pci/ixgbe/ixgbe_netbsd.c 1.16-1.17 sysdev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14 sysdev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4 sysdev/pci/ixgbe/ixgbe_netmap.h 1.2 sysdev/pci/ixgbe/ixgbe_osdep.c 1.7 sysdev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30 sysdev/pci/ixgbe/ixgbe_phy.c 1.24 sysdev/pci/ixgbe/ixgbe_rss.h 1.5 sysdev/pci/ixgbe/ixgbe_sriov.h 1.4 sysdev/pci/ixgbe/ixgbe_type.h 1.49 sysdev/pci/ixgbe/ixgbe_vf.c 1.27 sysdev/pci/ixgbe/ixgbe_x540.c 1.18-1.19 sysdev/pci/ixgbe/ixgbe_x540.h 1.9 sysdev/pci/ixgbe/ixgbe_x550.c 1.19-1.20 sysdev/pci/ixgbe/ixgbe_x550.h 1.6 sysdev/pci/files.pci 1.438 share/man/man4/ixg.4 1.15 share/man/man4/ixv.4 1.8 - Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism. Before this commit, resource shortage was easily occurred because the total number of the clusters is small. - Improve performance: - Use m_adj(ETHER_ALIGN) more. - Sprinkle __predict_false() in the RX path. - Don't pre-allocate a cluster for RXCOPY case to improve short packet's performance. - Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing DMA buffer. Also, when the buffer is already freed, do not call bus_dmamap_unload(9) (no resource leaks with this change). This change is required to make ixg(4) work on alpha. - Keep m_len and m_pkthdr.len consistent to prevent panic on arm. - Fix panic when bus_dmamap_load_mbuf() failed in ixgbe_setup_receive_ring(). - Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability on aarch64. - Use uint64_t instead of bus_addr_t for the TX descriptor's buffer address. At least, this change is required for macppc (sizeof(bus_addr_t) == 4) to make TX work. - Fix little-endian dependence. - Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring(). - Refresh unrefreshed descriptors' buffers correctly. - Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent panic. - Save the discard_multidesc state to not to forget the state by exiting rxeof(). - Add missing increment of no_mbuf error counter. - Don't increment no_mbuf evcnt(9) when discarding multi-descriptor packet. - ixv: Modify error message to sync with ixgbe.c - Print the error value of ixgbe_reset_hw() for debugging. - Remove extra unlock/lock processing around if_percpuq_enqueue(). - Refactor rxr->next_to_check updating. - Add new sysctl "rx_copy_len". - Add a new sysctl to read rxr->next_to_refresh. - Print error number when error occurred. - Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional change. - Don't use fixed value. - Comment out flow director processing in fast path. - Add missing NetBSD RCS IDs and __KERNEL_RCSID()s. - KNF. - Fix typos.
Pull up the following (via patch), requested by msaitoh in ticket #1346: sys/dev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch sys/dev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch sys/dev/pci/ixgbe/ix_txrx.c 1.68-1.93 sys/dev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch sys/dev/pci/ixgbe/if_bypass.c 1.7-1.9 sys/dev/pci/ixgbe/if_fdir.c 1.4-1.5 sys/dev/pci/ixgbe/if_sriov.c 1.10-1.11 sys/dev/pci/ixgbe/ixgbe_82598.c 1.16 sys/dev/pci/ixgbe/ixgbe_82599.c 1.23 sys/dev/pci/ixgbe/ixgbe_api.c 1.25 sys/dev/pci/ixgbe/ixgbe_bypass.h 1.2 sys/dev/pci/ixgbe/ixgbe_common.c 1.30-1.33 sys/dev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11 sys/dev/pci/ixgbe/ixgbe_dcb.h 1.7 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9 sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.7 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9 sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.7 sys/dev/pci/ixgbe/ixgbe_fdir.h 1.3 sys/dev/pci/ixgbe/ixgbe_features.h 1.3 sys/dev/pci/ixgbe/ixgbe_mbx.c 1.12 sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.13, 1.16-1.17 sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14 sys/dev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4 sys/dev/pci/ixgbe/ixgbe_netmap.h 1.2 sys/dev/pci/ixgbe/ixgbe_osdep.c 1.7 sys/dev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30 sys/dev/pci/ixgbe/ixgbe_phy.c 1.24 sys/dev/pci/ixgbe/ixgbe_rss.h 1.5 sys/dev/pci/ixgbe/ixgbe_sriov.h 1.4 sys/dev/pci/ixgbe/ixgbe_type.h 1.49 sys/dev/pci/ixgbe/ixgbe_vf.c 1.27 sys/dev/pci/ixgbe/ixgbe_x540.c 1.18-1.19 sys/dev/pci/ixgbe/ixgbe_x540.h 1.9 sys/dev/pci/ixgbe/ixgbe_x550.c 1.19-1.20 sys/dev/pci/ixgbe/ixgbe_x550.h 1.6 sys/dev/pci/files.pci 1.438 share/man/man4/ixg.4 1.15 share/man/man4/ixv.4 1.8 - Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism. Before this commit, resource shortage was easily occurred because the total number of the clusters is small. - Improve performance: - Use m_adj(ETHER_ALIGN) more. - Sprinkle __predict_false() in the RX path. - Don't pre-allocate a cluster for RXCOPY case to improve short packet's performance. - Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing DMA buffer. Also, when the buffer is already freed, do not call bus_dmamap_unload(9) (no resource leaks with this change). This change is required to make ixg(4) work on alpha. - Keep m_len and m_pkthdr.len consistent to prevent panic on arm. - Fix panic when bus_dmamap_load_mbuf() failed in ixgbe_setup_receive_ring(). - Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability on aarch64. - Use uint64_t instead of bus_addr_t for the TX descriptor's buffer address. At least, this change is required for macppc (sizeof(bus_addr_t) == 4) to make TX work. - Fix little-endian dependence. - Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring(). - Refresh unrefreshed descriptors' buffers correctly. - Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent panic. - Save the discard_multidesc state to not to forget the state by exiting rxeof(). - Add missing increment of no_mbuf error counter. - Don't increment no_mbuf evcnt(9) when discarding multi-descriptor packet. - ixv: Modify error message to sync with ixgbe.c - Print the error value of ixgbe_reset_hw() for debugging. - Remove extra unlock/lock processing around if_percpuq_enqueue(). - Refactor rxr->next_to_check updating. - Add new sysctl "rx_copy_len". - Add a new sysctl to read rxr->next_to_refresh. - Print error number when error occurred. - Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional change. - Don't use fixed value. - Comment out flow director processing in fast path. - Add missing NetBSD RCS IDs and __KERNEL_RCSID()s. - KNF. - Fix typos.
Sync with HEAD.
Add missing __KERNEL_RCSID().
Mostly merge changes from HEAD upto 20200411
Pull up the following revisions (via patch), requested by msaitoh in ticket #1301: sys/dev/pci/ixgbe/if_sriov.c 1.5-1.6 sys/dev/pci/ixgbe/ix_txrx.c 1.53-1.54 sys/dev/pci/ixgbe/ixgbe_x550.h 1.5 sys/dev/pci/ixgbe/ixgbe.c 1.169-1.170,1.176,1.179,1.181,1.185-1.186,1.188-1.192 via patch sys/dev/pci/ixgbe/ixgbe.h 1.53,1.55 sys/dev/pci/ixgbe/ixgbe_82599.c 1.21 sys/dev/pci/ixgbe/ixgbe_api.c 1.22-1.23 sys/dev/pci/ixgbe/ixgbe_api.h 1.14-1.15 sys/dev/pci/ixgbe/ixgbe_x550.c 1.14-1.15 sys/dev/pci/ixgbe/ixgbe_common.c 1.23 sys/dev/pci/ixgbe/ixgbe_common.h 1.14 sys/dev/pci/ixgbe/ixgbe_mbx.c 1.11 sys/dev/pci/ixgbe/ixgbe_mbx.h 1.14 sys/dev/pci/ixgbe/ixgbe_netmap.c 1.2 sys/dev/pci/ixgbe/ixgbe_features.h 1.2 sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.9 sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.9-1.10 sys/dev/pci/ixgbe/ixgbe_phy.c 1.18 sys/dev/pci/ixgbe/ixgbe_type.h 1.37,1.39-1.40 sys/dev/pci/ixgbe/ixgbe_vf.c 1.18 sys/dev/pci/ixgbe/ixv.c 1.112-1.114,1.117,1.119 via patch Sync ixgbe up to 20190717 except ETHERCAP or ixv's VLAN stuff: - Add firmware recovery mode for X550, X550A(Xeon D) and X550EM(C3000). - Remove IXGBE_DEV_ID_82599_LS(0x154f) support again. - On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em() has extra check (e.g. exclude 1G copper). - It's not required to calculate unused queues' statistics. - Remove ETHERCAP_VLAN_HWFILTER's definition. - Match 82598_BX(0x1508), 82599_KR(0x1517), 82599_SFP_EM(0x1507), X550EM_X_XFI(0x15b0), X550EM_A_QSFP(0x15ca) and X550EM_A_QSFP_N(0x15cc) - Add missing XFI support into ixgbe_get_link_capabilities_X550em(). - Other than IXGBE_VF_RESET should wait ACK, so use ixgbevf_write_msg_read_ack() instead of write_posted() in ixgbe_update_mc_addr_list_vf(). - When ixv_check_link() failed in the watchdog function, reset the interface. - Remove RXCSUM register modification in ixv_initialize_receive_units(). It seems it's not required. - Remove some debug printf in ixv_print_debug_info(). - Calculate vector's bit location correctly when the vector >= 31 in ixgbe_allocate_msix(). - Fix hung queue check when the queue number >= 31. - On ENETRESET case, not continue and quit the ifflags_cb() function because if_init() will do the same thing. - Fix bugs in unused code. - Fix typo in comment. - Fix typo in unused code. - Whitespace fixes. KNF.
Sync with FreeBSD ix-3.3.8 part 1. No functional change in this part: - Move ixgbe_toggle_txdctl() to ixgbe_common.c and modify a bit. No functional change because this function is currently used for SR-IOV and it's not used in NetBSD. - Some modification to match the latest netmap API. - Modify ixgbe_hic_unlocked(). No functional change because neither IXGBE_HOST_INTERFACE_APPLY_UPDATE_CMD(0x38) nor IXGBE_HOST_INTERFACE_SHADOW_RAM_READ_CMD(0x31) are used. - Add ixgbe_clear_mbx(). No functional change because this function is not used yet. - Add some not-yet-used register definitions. - Whitespace fixes.
Pull up following revision(s) (requested by msaitoh in ticket #750): sys/dev/pci/ixgbe/ixgbe_x540.h: revision 1.8 sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.11 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.6 sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.12 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.7 sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: revision 1.6 sys/dev/pci/ixgbe/ixgbe_fdir.h: revision 1.2 sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: revision 1.6 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.6 sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.18 sys/dev/pci/ixgbe/if_sriov.c: revision 1.3 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.7 sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.19 sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.13 sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.7 sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.19 sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.16 sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.8 sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.17 sys/dev/pci/ixgbe/ixgbe_dcb.h: revision 1.6 sys/dev/pci/ixgbe/if_bypass.c: revision 1.4 sys/dev/pci/ixgbe/ixv.c: revision 1.91 sys/dev/pci/ixgbe/ixgbe_rss.h: revision 1.4 sys/dev/pci/ixgbe/ixv.c: revision 1.92 sys/dev/pci/ixgbe/ixv.c: revision 1.93 sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.4 sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.12 sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.13 sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.13 sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.12 sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.33 sys/dev/pci/ixgbe/if_fdir.c: revision 1.2 sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.34 sys/dev/pci/ixgbe/ix_txrx.c: revision 1.39 sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.13 sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.20 sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.3 sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.21 sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.21 sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.22 sys/dev/pci/ixgbe/ixgbe_82599.h: revision 1.7 sys/dev/pci/ixgbe/ixgbe.c: revision 1.144 sys/dev/pci/ixgbe/ixgbe.c: revision 1.145 sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.16 sys/dev/pci/ixgbe/ixgbe.c: revision 1.146 sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.17 sys/dev/pci/ixgbe/ixgbe_82598.h: revision 1.8 sys/dev/pci/ixgbe/ixgbe.h: revision 1.41 sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.10 sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.14 sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.15 sys/dev/pci/ixgbe/ixgbe_phy.h: revision 1.11 Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff: - Always schedule module intterrupt in ixgbe_config_link() when a device is SFP+ based. - Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units(). It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in NetBSD. - Simplify ixgbe_bp_wd_set(). No functional change. - Whitespace. Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change: - Fix length of reading buffer when the command is Read Flash in ixgbe_host_interface_command(). - Add missing start_hw() call in ixv_init_locked(). This is not a real bug because start_hw just set hw->adapter_stopped to false and anyone refer it. - Style change. - Update comment. Read sc_if_flags after taking core lock. Same as if_wm.c rev. 1.418.
Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff: - Always schedule module intterrupt in ixgbe_config_link() when a device is SFP+ based. - Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units(). It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in NetBSD. - Simplify ixgbe_bp_wd_set(). No functional change. - Whitespace.
Pull up following revision(s) (requested by msaitoh in ticket #441): sys/dev/pci/files.pci: 1.390 sys/dev/pci/ixgbe/if_bypass.c: new sys/dev/pci/ixgbe/if_fdir.c: new sys/dev/pci/ixgbe/if_sriov.c: new sys/dev/pci/ixgbe/ixgbe_bypass.h: new sys/dev/pci/ixgbe/ixgbe_fdir.h: new sys/dev/pci/ixgbe/ixgbe_features.h: new sys/dev/pci/ixgbe/ixgbe_netmap.c: new sys/dev/pci/ixgbe/ixgbe_netmap.h: new sys/dev/pci/ixgbe/ixgbe_rss.h: new sys/dev/pci/ixgbe/ixgbe_sriov.h: new sys/dev/pci/ixgbe/ix_txrx.c: 1.28, 1.30 via patch sys/dev/pci/ixgbe/ixgbe.c: 1.97-1.105, 1.107-1.111, 1.113-1.115 sys/dev/pci/ixgbe/ixgbe.h: 1.26-1.29 via patch sys/dev/pci/ixgbe/ixv.c: 1.57-1.58, 1.60-1.61, 1.63-1.64, 1.66-1.72, 1.75 via patch sys/dev/pci/ixgbe/ixgbe_api.c: 1.17-1.18 via patch sys/dev/pci/ixgbe/ixgbe_type.h: 1.26-1.30 via patch sys/dev/pci/ixgbe/ixgbe_82598.c: 1.9-1.10 via patch sys/dev/pci/ixgbe/ixgbe_82598.h: 1.6-1.7 sys/dev/pci/ixgbe/ixgbe_82599.c: 1.15-1.16 via patch sys/dev/pci/ixgbe/ixgbe_82599.h: 1.5-1.6 sys/dev/pci/ixgbe/ixgbe_api.h: 1.10-1.11 via patch sys/dev/pci/ixgbe/ixgbe_common.c: 1.14-1.16 via patch sys/dev/pci/ixgbe/ixgbe_common.h: 1.8-1.9 via patch sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.5-1.6 sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.4-1.5 sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.4-1.5 sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.4-1.5 sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.4-1.5 sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.4-1.5 sys/dev/pci/ixgbe/ixgbe_mbx.c: 1.7-1.9 via patch sys/dev/pci/ixgbe/ixgbe_mbx.h: 1.11-1.12 via patch sys/dev/pci/ixgbe/ixgbe_osdep.c: 1.2 sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.18-1.19 via patch sys/dev/pci/ixgbe/ixgbe_phy.c: 1.12-1.14 via patch sys/dev/pci/ixgbe/ixgbe_phy.h: 1.9-1.10 via patch sys/dev/pci/ixgbe/ixgbe_vf.c: 1.13-1.15 via patch sys/dev/pci/ixgbe/ixgbe_vf.h: 1.9-1.11 via patch sys/dev/pci/ixgbe/ixgbe_x540.c: 1.10-1.12 sys/dev/pci/ixgbe/ixgbe_x540.h: 1.6-1.7 sys/dev/pci/ixgbe/ixgbe_x550.c: 1.6-1.7 sys/dev/pci/ixgbe/ixgbe_x550.h: 1.3 Sync with FreeBSD's up to r326022, fix bugs and some improvements: - Don't limit number of queue pair to 8. Take chip's max TX queues and max RX queues into account. - Add C3000 (Denverton) support. - Add bypass function support for bypass adapters. - Change EEE sysctl. - Remove thermal test sysctl. - ixv(4): set RSS mapping. - ixv(4): Add TSOv6. - ixv(4): Fix hardware counter. - ixv(4): Make TX/RX descriptors size the same as ixg(4). - ixv(4): Print device name in ixv_attach(). - ixv(4): Make mailbox statistic counters evcnt(9). - ixv(4): Fix a problem that mailbox interrupt never occurred. - ixv(4): Don't check neither VTEICR nor VTEICS same as Linux. It seems that both registers can't be used to check which MSI-X vector is triggered. - ixv(4): Print Mailbox API version. - Print driver feature capabilities and enable bits when verbose boot. - Fix a bug that X550EM_A (Denverton) can't force 10BaseT. - Remove all half-duplex setting because of the chip specification. - Add 2.5GBASE-T and 5GBASE-T support. - Set ifm_baudrate correctly. - Protect ec_multi* with mutex like other MP safe Ethernet drivers. - On X550 and newer, print NVM Image Version with %u.%02x. - On X540, print PHY FW Revision with %u.%x. 0x4030 will be printed as "Revision 4.3 ID 0x0" - Fix value check of OEM_NVM_IMAGE_VER. - Print PHY ID only for copper PHY. - Fix a bug that X550 and newer didn't linkup if it forces 100BaseTX-FDX or 10BaseT-FDX. - Fix a bug that RX may accesses freed area. It also fixes a problem that if_init() takes long time on many core machine. - Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This change has no influence to netbsd because it's enabled by default and NetBSD has no API to disable it. - Whitespace fix.
Sync with FreeBSD's r326022. All of the following changes have no influence to netbsd: - Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This change has no influence to netbsd because it's enabled by default and NetBSD has no API to disable it. - Fix for netmap module. - Remove never defined UDP_IPV4_EX - Add SPDX-License-Identifier
update from HEAD
Make mailbox statistic counters evcnt(9). Example: > ixv0 message TXs 23 0 misc > ixv0 message RXs 2911 0 misc > ixv0 ACKs 23 0 misc > ixv0 REQs 22 0 misc > ixv0 RSTs 0 0 misc
- Sync with FreeBSD r320688 (and up to r322865): - Add C3000(Denvertion(-NS)) support. - Add bypass function support for bypass adapters. Sysctls are provided. Not tested because I have no any bypass adapter. - ixv(4): set RSS mapping. - Change EEE sysctl. - ixv(4): Add TSOv6. - ixv(4): Mailbox API 1.2 and more are implemented and comment says it negotiate with 1.2 but it really does 1.1... - Remove thermal test sysctl. - Fix unknown bugs. - Print driver feature capabilities and enable bits when verbose boot.
Sync with HEAD
Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
Sync with HEAD
Update ixg(4) and ixv(4) up to FreeBSD r303890: - Configure ixgbe phy & gbic power. Setup phy and gbic power as per Linux 4.3.13 driver. This fixes link not detected on X540-AT2 after booting to Linux which turns the phy power off on detach. (FreeBSD r295093) - Fixup DA cable detection routine. (FreeBSD r303032) - Some minor changes
Update ixg(4) and ixv(4) up to FreeBSD r282299: - Add support for X55x. - ADD EEE support (not tested). - Add WOL support (not tested). - Add suspend/resume support (not testd). - Add LPLU support (not tested). - Add DMA Coalescing (note verified). - Not tested well for sysctls. - Fix ixgbe_set_advertise() a bit. At least, FreeBSD r294578 is required to work hw.ixg0.advertise_speed sysctl correctly.
Update ixg(4) and ixv(4) up to FreeBSD r280197: - Add support for 82599_QSFP_SF_QP and X540T1. - Add partial support for X55x. It's required to sync with FreeBSD r282299 to support X55x. - Bugfixes.
Apply patch (requested by msaitoh in ticket #697): sys/dev/pci/files.pci 1.375 via patch sys/dev/pci/ixgbe/ixgbe.c 1.24-1.27 via patch sys/dev/pci/ixgbe/ixgbe.h 1.4-1.6 via patch sys/dev/pci/ixgbe/ixgbe_82598.c 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_82598.h 1.1-1.2 via patch sys/dev/pci/ixgbe/ixgbe_82599.c 1.6-1.8 via patch sys/dev/pci/ixgbe/ixgbe_82599.h 1.1 via patch sys/dev/pci/ixgbe/ixgbe_api.c 1.5-1.6 via patch sys/dev/pci/ixgbe/ixgbe_api.h 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_common.c 1.3-1.4 via patch sys/dev/pci/ixgbe/ixgbe_common.h 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_mbx.c 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_mbx.h 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_osdep.h 1.4-1.6 via patch sys/dev/pci/ixgbe/ixgbe_phy.c 1.3-1.4 via patch sys/dev/pci/ixgbe/ixgbe_phy.h 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_type.h 1.8-1.9 via patch sys/dev/pci/ixgbe/ixgbe_vf.c 1.2-1.3 via patch sys/dev/pci/ixgbe/ixgbe_vf.h 1.3-1.4 via patch sys/dev/pci/ixgbe/ixgbe_x540.c 1.1-1.2 via patch sys/dev/pci/ixgbe/ixgbe_x540.h 1.1 via patch sys/dev/pci/ixgbe/ixv.c 1.5-1.7 via patch sys/dev/pci/ixgbe/ixv.h 1.4-1.5 via patch Synchronize our ixg(4) driver up to FreeBSD r243716: - Add X540 support. - Add TSO6 support. - Add 100BaseTX support. - The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE). The value is the same as other *BSDs. The change might cause a address space shortage (ixgbe_dmamap_create() might fail) on some machines. - Show 1000Base-SX correctly. - Fix if_baudrate from 1G to 10G. - Fix a bug that ifconfig -z (SOICZIFDATA) doesn't work. - Fix a lot of bugs. - Improve performance. [msaitoh, ticket #697]
Sync with HEAD
Update our ixg(4) driver up to FreeBSD r238149: - Add TSO6 support. - The max size in dma tag is changed from 65535 to 262140 (IXGBE_TSO_SIZE). The value is the same as other *BSDs. The change might cause a address space shortage (ixgbe_dmamap_create() might fail) on some machines. - Fix a lot of bugs. - Improve performance.
Synchronize our ixg(4) driver up to FreeBSD r230775: - Add X540 support. - Add 100BaseTX support. - Fix a lot of bugs. - Improve performance.
Add sources for ixgbe(4), a Intel 82599 10-gigabit ethernet driver ported from FreeBSD.