CVS log for src/sys/dev/mii/miidevs

Up to [cvs.NetBSD.org] / src / sys / dev / mii

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Add Motorcomm YT8531 Gigabit PHY

Add ADMTek.

miidevs: Add some MaxLinear GPY211 variants, GPY 212 and GPY215.

Pull up following revision(s) (requested by msaitoh in ticket #712):

	sys/dev/mii/miidevs: revision 1.170
	sys/dev/mii/miidevs: revision 1.171
	sys/dev/mii/miidevs: revision 1.169

Add MaxLinear GPY21[125] 2.5G PHY.

miidevs: Update I22[56]
 - Add model 0x0001 and 0x0005 for I226 and 0x000c for I225.
   Need more info to write better descriptions.
 - Modify GPY211's description a little.

miidevs: Add MaxLinear GPY115.

miidevs: Add MaxLinear GPY115.

miidevs: Update I22[56]

 - Add model 0x0001 and 0x0005 for I226 and 0x000c for I225.
   Need more info to write better descriptions.
 - Modify GPY211's description a little.

Add MaxLinear GPY21[125] 2.5G PHY.

Pull up following revision(s) (requested by msaitoh in ticket #1577):
	sys/dev/mii/miidevs: revision 1.168
  Add some Microsemi (Vitesse) devices.

Pull up following revision(s) (requested by msaitoh in ticket #990):

	sys/dev/mii/miidevs: revision 1.168

  Add some Microsemi (Vitesse) devices.

 Add some Microsemi (Vitesse) devices.

Pull up the following revisions, requested by msaitoh in ticket #1529:

	sys/dev/mii/miidevs				1.154, 1.162-1.167
	sys/dev/mii/atphy.c				1.28 via patch
	sys/dev/mii/brgphy.c				1.87 via patch
	sys/dev/mii/etphy.c				1.5, 1.6 via patch
	sys/dev/mii/rdcphy.c				1.6, 1.8 via patch

- Add support Broadcom BCM54213PE and some new RDC devices.
- Rename RDC to xxRDC.
- Use xxVIA instead of VIA.
- etphy(4):
  - Rename ET1011 to ET1011C and add ET1011 support.
  - Use mii_phy_flowstatus() to reflect flow status from negotiated
    result.
- Use static.
- KNF.

Pull up following revision(s) (requested by msaitoh in ticket #831):

	sys/dev/mii/rdcphy.c: revision 1.6
	sys/dev/mii/rdcphy.c: revision 1.8
	sys/dev/mii/miidevs: revision 1.162
	sys/dev/mii/miidevs: revision 1.163
	sys/dev/mii/miidevs: revision 1.164
	sys/dev/mii/miidevs: revision 1.165
	sys/dev/mii/miidevs: revision 1.167
	sys/dev/mii/brgphy.c: revision 1.87

  Change the OUI macro name of RDC to xxRDC. 0x00d02d is non-bitreverse value
of official 0x000bb4. From Andrius V.
RDC -> xxRDC. No functional change.

Add BCM54213PE

Match BCM54213PE

  Use xxVIA instead of VIA.
0x004063 is VIA's official OUI but VT6103 use 0x0002c6.
0x0002c6 is non-bitreversed value of 0x004063. Reported by Andrius V.

- Add Quake Technologies and Aeluros' OUI
- Add Teranetics TN1010 10GBase-T PHY
  Add two new RDC PHYs from Andrius V.
  Add two new RDC PHYs from Andrius V.

Mostly merge changes from HEAD upto 20200411

 Add two new RDC PHYs from Andrius V.

Pull up following revision(s) (requested by msaitoh in ticket #786):

	sys/dev/pci/if_nfe.c: revision 1.77
	sys/dev/pci/if_nfe.c: revision 1.78
	sys/dev/mii/atphy.c: revision 1.28
	sys/dev/mii/atphy.c: revision 1.29
	sys/dev/mii/miidevs: revision 1.166

  Use unsigned to avoid undefined behavior. Found by kUBSan.
0x001374 is non-bitreversed value of Attansic OUI(0x00c82e).
Attansic/Atheros correctly uses ID1 and ID2 register, so delete all 0x001374
related entries.

Improve error check:
- We check PHY register read error correctly (timeout and NFE_PHY_ERROR), so
   don't check NFE_PHY_DATA register's value with 0xffffffff or 0. At least,
   some registers may have 0.
- Check NFE_PHY_ERROR bit in nfe_miibus_writereg().
- Improve debug printf

Fix a bug that atphy(4) doesn't work with Attansic L2 rev. 1.
Reported by Rocky Hotas.

- On ASUS M2N-MX SE Plus (NVIDIA MCP61 with Attansic L2 rev. 1), changing
   debug port 0x29's value makes the next PHY read fail with error.  Read any
   register to ignore this problem if the PHY is Attansic L2 revision 1.
   I don't know if this problem is from L2 rev. 1 itself or from the
   combination because I have only one machine which has L2 rev. "1".
   At least, ASUS eee pc 900 (Attansic L2 rev. "2") has no this problem.
- Add comment. AR8021 document has no description about the power saving
   control register(debug port 0x29).
- Add comment. AR8031 document says the lower 14 bits are reserved and the
   default value is 0x36d0. Shouldn't we clear those bits?
- I have no document neither L1(F1) nor L2(F2), so I don't know whether the
   debug port access is correct or not.
Tested with the following machines:
- ASUS P5B SE,         L1 rev. 5,            age(4)
- ASUS K50IJ,          L1 rev. 9,            ale(4)
- ASUS eee pc 900,     L2 rev. 2,            lii(4)
- ASUS M2N-MX SE Plus, L2 rev. 1,            nfe(4)
- Intel DP55WB,        82578(AR8021 rev. 2), wm(4)
- Dell inspiron 14z,   AR0835 rev. 9,        alc(4)

0x001374 is non-bitreversed value of Attansic OUI(0x00c82e).

Attansic/Atheros correctly uses ID1 and ID2 register, so delete all 0x001374
related entries.

- Add Quake Technologies and Aeluros' OUI
- Add Teranetics TN1010 10GBase-T PHY

Sync with head.

 Use xxVIA instead of VIA.

 0x004063 is VIA's official OUI but VT6103 use 0x0002c6.
0x0002c6 is non-bitreversed value of 0x004063. Reported by Andrius V.

Add BCM54213PE

 Change the OUI macro name of RDC to xxRDC. 0x00d02d is non-bitreverse value
of official 0x000bb4. From Andrius V.

Pull up following revision(s) (requested by msaitoh in ticket #479):

	sys/dev/mii/micphy.c: revision 1.9
	sys/dev/mii/miidevs: revision 1.161
	share/man/man4/micphy.4: revision 1.3

 Add Micrel (now Microchip) KSZ80[0456]1, KSZ8721, KSZ9[01]31, KS8731 and
KSZ9477.

 Add support for KSZ80[0456]1, KSZ8721, KSZ9[01]31, KS8731 and KSZ9477.
It also supports LAN7430's internal PHY. First wrote by nisimura@ and added
some device support by me. Not tested well.

Pull up following revision(s) (requested by msaitoh in ticket #473):

	sys/dev/mii/rlphy.c: revision 1.37
	sys/dev/mii/miidevs: revision 1.155
	sys/dev/mii/miidevs: revision 1.156
	sys/dev/mii/miidevs: revision 1.157
	sys/dev/mii/miidevs: revision 1.159
	sys/dev/mii/miidevs: revision 1.160

 Add Teranetics, Aquantia and Renesas.

 Use uppercase for vendor name.

 Change ICPLUS(0x0090c3) to xxICPLUS(0x0009c3)
- ICPLUS -> xxICPLUS
- Print model name if it's ICPLUS IP101 to avoid "Realtek internal PHY".

Fix typo. from vezhlys
- Rename JMICRON 0x0021 from JMC250 to JMP211
- Rename JMICRON 0x0022 from JMC260 to JMP202

Pull up the following revisions, requested by msaitoh in ticket #1457:

	sys/dev/mii/miidevs			1.155-1.157, 1.159-1.160
	sys/dev/mii/rlphy.c			1.37 via patch

- miidevs update:
 - Add Teranetics, Aquantia and Renesas.
 - Change ICPLUS(0x0090c3) to xxICPLUS(0x0009c3).
 - Fix typo. from vezhlys.
 - Rename JMICRON 0x0021 from JMC250 to JMP211
 - Rename JMICRON 0x0022 from JMC260 to JMP202
- rlphy(4): Print model name if it's ICPLUS IP101 to avoid printing
  "Realtek internal PHY".

 Add Micrel (now Microchip) KSZ80[0456]1, KSZ8721, KSZ9[01]31, KS8731 and
KSZ9477.

- Rename JMICRON 0x0021 from JMC250 to JMP211
- Rename JMICRON 0x0022 from JMC260 to JMP202

Pull up the following revisions, requested by msaitoh in ticket #1414:

	sys/dev/mii/ciphy.c			1.34-1.37 via patch
	sys/dev/mii/miidevs			1.158

- Indicate master mode if the negotiated result say so.
- Call mii_phy_flowstatus() to show the flow setting.
- Match a lot of Cicada and Vitesse devices correctly.
- Add support for VSC8221, VSC8234 and VSC8641.
- KNF

Pull up following revision(s) (requested by msaitoh in ticket #372):

	sys/dev/mii/miidevs: revision 1.158
	sys/dev/mii/ciphy.c: revision 1.37

- All of Cicada and Vitesse devices' OUI are not bit-reversed, so use "xx".
- Rename CS82xx -> CIS82xx
- Add Vitesse VSC8224, VSC8234, VSC8641 and VSC8501.
- Match a lot of Cicada and Vitesse devices correctly. This change also fixes
  a bug that ciphy_fixup() didn't work.
- Match VSC8221, VSC8234 and VSC8641.

Fix typo. from vezhlys

- All of Cicada and Vitesse devices' OUI are not bit-reversed, so use "xx".
- Rename CS82xx -> CIS82xx
- Add Vitesse VSC8224, VSC8234, VSC8641 and VSC8501.

 Change ICPLUS(0x0090c3) to xxICPLUS(0x0009c3)

 Use uppercase for vendor name.

 Add Teranetics, Aquantia and Renesas.

Pull up following revision(s) (requested by msaitoh in ticket #144):

	sys/dev/mii/miidevs: revision 1.154
	sys/dev/mii/etphy.c: revision 1.5
	sys/dev/mii/etphy.c: revision 1.6

No functional change:
 - Use static.
 - KNF.

From FreeBSD:
 - Rename ET1011 to ET1011C
 - Add ET1011

From FreeBSD:
- Support ET1011.
- Use mii_phy_flowstatus() to reflect flow status from negotiated result.

From FreeBSD:
 - Rename ET1011 to ET1011C
 - Add ET1011

Pull up following revision(s) (requested by msaitoh in ticket #1315):

	sys/dev/mii/miidevs: revision 1.151
	sys/dev/mii/miidevs: revision 1.152
	sys/dev/mii/miidevs: revision 1.153
	sys/dev/mii/miidevs: revision 1.145
	sys/dev/mii/miidevs: revision 1.146
	sys/dev/mii/miidevs: revision 1.147
	sys/dev/mii/miidevs: revision 1.148
	sys/dev/mii/miidevs: revision 1.149
	sys/dev/mii/miidevs: revision 1.150

 Add SMSC(Microchip) LAN911X and LAN75XX.

 Fix I82578 OUI. This change only affects to MIIVERBOSE.
See also if_wm.c rev. 1.599.

 Cleanup xx or yy OUIs. Sort by number.

 Add yyASIX and AX88772* devices.

 Add Davicom DM9161, DM9161[ABC] and DM9601.

 Remove extra space.

 Add Bankspeed Pty and NetExcell.

Add Amlogix GXL internal PHY

Add ID for the Broadcom BCM53125 1000BASE-T switch.

Sync with HEAD

Add ID for the Broadcom BCM53125 1000BASE-T switch.

Add Amlogix GXL internal PHY

 Add Bankspeed Pty and NetExcell.

 Remove extra space.

 Add Davicom DM9161, DM9161[ABC] and DM9601.

 Add yyASIX and AX88772* devices.

 Cleanup xx or yy OUIs. Sort by number.

 Fix I82578 OUI. This change only affects to MIIVERBOSE.
See also if_wm.c rev. 1.599.

Pull up following revision(s) (requested by msaitoh in ticket #1207):

	sys/dev/mii/miidevs: revision 1.140
	sys/dev/mii/miidevs: revision 1.141
	sys/dev/mii/miidevs: revision 1.142
	sys/dev/mii/miidevs: revision 1.143
	sys/dev/mii/miidevs: revision 1.144
	sys/dev/mii/miidevs: revision 1.133
	sys/dev/mii/miidevs: revision 1.134
	sys/dev/mii/miidevs: revision 1.135
	sys/dev/mii/miidevs: revision 1.136
	sys/dev/mii/miidevs: revision 1.137
	sys/dev/mii/miidevs: revision 1.138
	sys/dev/mii/miidevs: revision 1.139

- Add Marvell 88E1240.
- Marvell model 0x0029 is not 88E1116R but E1318S.

Add RTL8201E from OpenBSD.

 From OpenBSD:
  - Add ASIX OUI.
  - Add VIA OUI and devices.
  - Add Vitesse OUI and devices.
 From FreeBSD:
  - Add BROADCOM4.

- Add Tridium, Data Track Technology, Netas, Ralink Technology,
   Sunplus Technology and ADMtek's OUI.

- Sort by OUI.
  Sort by model number.

 From FreeBSD:
  - Add Broadcom BCM540[24], BCM5424, BCM5466 and BCM54[78]8.
  - Add ICS1893C.
  - Add Micrel KSZ8081 and KSZ9031.

- Sort by model number.

- Add missing white space.

  Change CS8244's OUI from xxCICADA to CICADA. I don't know whether this
change is correct or not...
  Sort in alphabetical order a bit.
  Add non-xx'ed DAVICOM DM9101.

- Add SMSC LAN83C185 10/100 PHY from OpenBSD
- Add SMSC LAN8740 10/100 media interface
  Add SMSC(now Microchip) LAN8741A and LAN8742

 Add SMSC(Microchip) LAN911X and LAN75XX.

 Add SMSC(now Microchip) LAN8741A and LAN8742

- Add SMSC LAN83C185 10/100 PHY from OpenBSD
- Add SMSC LAN8740 10/100 media interface

 Add non-xx'ed DAVICOM DM9101.

 Sort in alphebetical order a bit.

 Change CS8244's OUI from xxCICADA to CICADA. I don't know whether this
change is correct or not...

- Sort by model number.
- Add missing white space.

From FreeBSD:
 - Add Broadcom BCM540[24], BCM5424, BCM5466 and BCM54[78]8.
 - Add ICS1893C.
 - Add Micrel KSZ8081 and KSZ9031.

 Sort by model number.

- Add Tridium, Data Track Technology, Netas, Ralink Technology,
  Sunplus Technology and ADMtek's OUI.
- Sort by OUI.

From OpenBSD:
 - Add ASIX OUI.
 - Add VIA OUI and devices.
 - Add Vitesse OUI and devices.
From FreeBSD:
 - Add BROADCOM4.

Add RTL8201E from OpenBSD.

- Add Marvell 88E1240.
- Marvell model 0x0029 is not 88E1116R but E1318S.

Synch with HEAD

Pull up the following (requested by msaitoh in ticket #1164):

	sys/dev/mii/miidevs			1.128, 1.132 (patch)
	sys/dev/mii/makphy.c			1.43-1.51
	sys/dev/mii/makphyreg.h 		1.7-1.9

- miidevs: Add E1000 with model id 0x0006, it exists according to
  OpenBSD rename E1000 model 0x0000 to E1000_0 for consistency.
- Match 88E1112, 88E1118, 88E1512, 88E3082 and G65G.
- Match 88E3016 and add some 88E3016 specific code. Fixes part of
  PR kern/49270 and PR kern/53301.
- Make sure page 0 is selected when we initialize the PHY. Fixes
  problems with the eephy(4) that attaches to nfe(4) on machines like
  the Sun Ultra 40. (we had condition for this, now the page 0 is
  selected for any PHY type)
- If autonegotiation is not enabled, we need a software reset for the
  settings to take effect in makphy_service().
- Don't set PSCR_CRS_ON_TX on newer. Those chips have no this bit.
- Control BMCR_PDOWN for IFM_NONE. Some chips still don't work as
  expected. It would be required to modify PSCR and/or other register.
- Set mii_media_active correctly on non-autonego mode.
- Remove obsolete comment.
- Whitespace fix.

88E154[358] have the same ID.

Pull up following revision(s) (requested by msaitoh in ticket #1116):

	sys/dev/mii/miidevs: revision 1.130
	sys/dev/mii/miidevs: revision 1.131

Sort OUI by number. No functional change.

- Add ASIX Ax88x9x
- Add description for DP83846A.

Sync with HEAD

Pull up following revision(s) (requested by msaitoh in ticket #931):
	sys/dev/mii/miidevs: 1.127, 1.129
Add Intel X540 internal PHY.
--
All of 88E151[0248]'s model number is 0x001d.

- Add ASIX Ax88x9x
- Add description for DP83846A.

 Sort OUI by number. No functional change.

Sync with HEAD

 All of 88E151[0248]'s model number is 0x001d.

add E1000 with model id 0x0006, it exists according to OpenBSD
rename E1000 model 0x0000 to E1000_0 for consistency

Sync with HEAD

 Add Intel X540 internal PHY.

update from HEAD

Pull up following revision(s) (requested by msaitoh in ticket #372):
	sys/dev/mii/miidevs: revision 1.126
  Add X550 and X557.

Sync with HEAD

 Add X550 and X557.

Sync with HEAD

Sync with HEAD

Sync with netbsd-7-1-RELEASE

Pull up following revision(s) (requested by msaitoh in ticket #1371):
	sys/dev/mii/miidevs: revision 1.125
Add some Intel devices.

Sync with HEAD

Add some Intel devices.

Sync with netbsd-5

Pull up following revision(s) (requested by msaitoh in ticket #1299):
	sys/dev/mii/miidevs: revisions 1.123, 1.124
Add xxMarvell E6060 6-port 10/100 Fast Ethernet Switch
--
Add Marvell 88E1512.

Pull up the following revisions(s) (requested by msaitoh in ticket #1982):
	sys/dev/mii/miidevs:	revisions 1.79-1.80, 1.84, 1.86-1.88,
	    1.91-1.92, 1.94-1.96, 1.98-1.99, 1.101-1.112 via patch

Sync miidevs up to rev. 1.112:
- Add Agere ET1101 (PR#39094)
- Add some CICADA PHYs.
- AddMarvell 88E1000[S], 88E1116R, 88E1118, 88E1145, 88E1149[R],
- 88E1543, 88E3016, PHYG65G
- Add NS DP83849(PR#41256), DP83865.
- Add Broadcom BCM5325, BCM5365, BCM548[12], BCM5706, BCM570[89]S,
- BCM571[79]C, BCM5720C, BCM5756, BCM5785, BCM57765, BCM57780
- Add Atheros AR8021, AR8035
- Add RDC Semiconductor R6040 10/100 integrated PHY
- Add Vitesse VSC8221
- Add SMSC LAN 87[012]0
- Add Intel I21[07].
- Add IC Plus IP100, IP1000A and IP1001
- Add Micrel KSZ9021RN
- Add Relatek RTL8251
- Update comment.

Sync with HEAD

Add Marvell 88E1512.

Add xxMarvell E6060 6-port 10/100 Fast Ethernet Switch

Pull up following revision(s) (requested by nonaka in ticket #433):
	sys/dev/mii/miidevs: revision 1.121
	sys/dev/mii/miidevs: revision 1.122
BCM5714 and BCM5780 are used for both copper and fiber.
Add Realtek RTL8251.

Pull up the following changes, requested by msaitoh in #1204:
sys/dev/mii/miidevs	1.110-1.111, 1.114-1.118, 1.120-1.122 (patch)

	Add some PHYs into miidevs:
	- Add SMSC OUI and LAN8700 and LAN8710/LAN8720 PHY IDs.
	- Add Intel I210 internal PHY.
	- Add Intel I217 PHY.
	- Add some IC Plus Corp. devices.
	- Add Marvell 88E1543 Quad Port Gb PHY.
	- Add Micrel KSZ9021RN.
	- Add BCM5706 1000BASE-T/SX.
	- BCM5714 and BCM5780 are used for both copper and fiber, so modify the
	  descriptions.
	- Add Realtek RTL8251.

Add Realtek RTL8251.

BCM5714 and BCM5780 are used for both copper and fiber.

Rebase to HEAD as of a few days ago.

Rebase.

Add BCM5706 1000BASE-T/SX.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

sync with head

sync marvel with freebsd.

Add Micrel PHY (KSZ9021RN)

The new driver micphy is almost same as ukphy except that
micphy has a fixup for cpsw; a PHY with cpsw has to adjust
RGMII signal timing.

Reviewed by christos@

Add Marvell 88E1543 Quad Port Gb PHY

sys/dev/pci/if_bge.c		1.203-1.237, 1.239-1.241, 1.243-1.258 via patch
sys/dev/pci/if_bgereg.h		1.58-1.74, 1.76-1.83 via patch
sys/dev/pci/if_bgevar.h		1.10-1.16 via patch
sys/dev/pci/pcidevs		1.1149 via patch
sys/dev/pci/pcidevs.h		regen
sys/dev/pci/pcidevs_data.h	regen
sys/dev/mii/brgphy.c		1.61-1.63, 1.65, 1.67 via patch
sys/dev/mii/miivar.h		1.61 via patch
sys/dev/mii/miidevs		1.112-1.113 via patch
sys/dev/mii/miidevs.h		regen
sys/dev/mii/miidevs_data.h	regen
share/man/man4/bge.4		1.13-1.15 via patch

	Add some device support, fix a lot of bugs and add some enahcements.
	- Add Altima AC1003, APPLE BCM5701, Broadcom BCM5785F,
	  BCM5785G, BCM5787F, BCM5719, BCM5720, BCM57766, BCM57782 and BCM57786.
	- brgphy(4): Add BCM5756, BCM5717C, BCM5719C, BCM5720C and BCM57780.
	- Add some bugfixes and enhancement from FreeBSD:
	  - Workaround for BCM5906 silicon bug. When auto-negotiation results in
	   half-duplex operation, excess collision on the ethernet link may
	   cause internal chip delays that may result in subsequent valid
	   frames being dropped due to insufficient receive buffer resources.
	   (FreeBSD: r214219, r214251, r214292)
	  - Allow write DMA to request larger DMA burst size to get better
	   performance on BCM5785.
	   (FreeBSD r213333: OpenBSD 1.294)
	  - Enable TX MAC state machine lockup fix for both BCM5755 or higher
	   and BCM5906. Publicly available data sheet just says it may happen
	   due to corrupted TxMbuf.
	   (FreeBSD r214216)
	  - Follow Broadcom datasheet:
	   Delay 100 microseconds after enabling transmit MAC.
	   Delay 10 microseconds after enabling receive MAC.
	   (FreeBSD r241220)
	- Insert the completion barrier between register write and the
	  consecutive delay(). It will fix some device timeout problems
	  we have seen before.
	- Add DELAY(40) after turning on write DMA state machine.
	- Add some workarounds for 5717 A0 and 5776[56] to be stable.
	  From Linux tg3 driver.
	- Sync with *BSD. No functional change:
	  - make bge_chipid() and use it.
	  - use switch() instead of a lot of if()s.
	- Check BGE_RXBDFLAG_IPV6 flag for 5717_PLUS case.
	  Note that {tcp,udp}6csum flag is currently not added in the
	  capability.
	- Add delay after clearing BGE_MACMODE_TBI_SEND_CFGS for the link
	  checking.  FreeBSD has the same delay().
	- Rename PHY related flags for the consistency. It's the same as
	  FreeBSD.
	- Remove BGE_10_100_ONLY flag because this was not used.
	  For 10/100 devices, when calling mii_attach(), mask BMSR_EXTSTAT
	  flag to not to check Gigabit flags. It's the same as FreeBSD.
	- In brgphyattach(), set sc_isbge, sc_isbnx and sc_phyflags before
	  PHY_RESET() because brgphy_reset() refers those flags.
	- Call brgpy specific autonego function in MII_TICK. Before this commit,
	  only MII_MEDIACHG calls brgphy_mii_phy_auto() and MII_TICK calls MI
	  mii_phy_auto(). That was not intended.
	- Sync with FreeBSD and OpenBSD. Almost the same as OpenBSD rev. 1.325:
	  - Sync the ring setup code closer to FreeBSD's driver
	  - Do not touch the jumbo replenish threshold register on chips that
	    do not have jumbo support
	- Wait for the bootcode to complete initialization for 5717 and newer
	  devices.  See BCM5718 programmer's guide's "step 13,
	  Device reset Procedure, Section7".
	  57781's document has the same note.
	- 5718 and 57785 document say we should wait 100us.
	- Change the order of register settings a little to match both
	  Broadcom's document and Linux tg3.
	- Add detach function.
	- Fix a bug that chips which have BCM5906 ASIC touch GPIO wrongly.
	- Fix a bug that the NVRAM lock timeout occured on sparc64 onboard bge.
	- Check BGE_SGDIG_STS when the chip is NOT a 5717 A0, like freebsd
	  (OpenBSD rev. 1.327).
	- Fix the setting of Tx Random Backoff Register.
	- Add BGE_PCIMISCCTL_PCISTATE_RW in BGE_INIT. It's required to set the
	  PCISTATE register correctly.
	- Update comments from 57XX-PG105-R.pdf and 5718-PG106-R.pdf.
	- Add missing bus_dmamap_sync() in bge_intr(). The status word is
	  in DMAed area. Same as other *BSDs.
	- Check the hardware config words and print them. This change only
	  read them and print the values.
	- Set BGE_MISC_CTL's byte/word swap options before using
	  bge_readmem_ind().
	- For BGE_IS_575X_PLUS() devices, don't set
	  BGE_RXLPSTATCONTROL_DACK_FIX bits because these bits are reserved.
	- bge_init_tx_ring() uses BGE_RSLOTS (==256) but bge_free_tx_ring() uses
	  BGE_TX_RING_CNT (== 512). Delete BGE_RSLOTS and use BGE_TX_RING_CNT.
	  Same as OpenBSD's if_bge.c rev. 1.86.
	- Document says 5717 and newer chips have no
	  BGE_PCISTATE_INTR_NOT_ACTIVE bit, so don't use the bit on those
	  chips. Same as OpenBSD.
	- Fix a bug that the PHY address bits in MI_MODE register is wrongly
	  cleard.  Set the PHY address correctly.
	- Use BGE_SETBIT() instead of CSR_WRITE_4() for the BGE_MISC_LOCAL_CTL
	  register to not to modify some GPIO bits.
	- Call bge_poll_fw() before writing BGE_MODE_CTL register like the
	  latest linux tg3 dirver.
	- Set DMA watermark depend on the PCI max payload size.
	- Add BGE_JUMBO_CAPABLE flag to some chips. With this commit, 5714,
	  5780, 5717, 5718, 5719 (exclude rev. A0), 5720, 57765 and 57766 are
	  added to support jumbo frame.
	- Fix the setting of sc->bge_flags for 5717 and newer devices.
	- Fix a link detect bug on non-autopoll systems. Same as OpenBSD
	  (rev.1.329 and 1.336) and FreeBSD (r213710).
	- 57765 series is not based on 5717 series. 5717 series is based on
	  57765 series.
	- Set the TX DMA segment size based on the MTU size.
	- Change the TX ring size for 5717 series and 57764 series.
	- For 57766, set BGE_RDMAMODE_JMB_2K_MMRR for non-jumbo frame.
	  Same as Linux tg3.
	- For 57765 and newer devices, set BGE_MAX_RX_FRAME_LOWAT to 1.
	  This value is recommended by the document.
	- Change sysctl related functions for consistency.
	- Style change.
	- Use macro. Remove duplicated macro. Remove unused variable.
	- Fix comments. Add comments.
	- Remove extra semicolon. Remove unused code.
	[msaitoh, ticket #939]

resync from head

Pullup the following revisions via patch, requested by msaitoh in ticket #1850:
	sys/dev/pci/if_wm.c			1.201, 1.203-1.204,
						1.207-1.212, 1.215,
						1.217-1.218, 1.220-1.223,
						1.228, 1.232-245
	sys/dev/pci/if_wmreg.h			1.40-1.45, 1.47-1.48
	sys/dev/pci/if_wmvar.h			1.11-1.13
	sys/dev/pci/pcidevs			1.1074, 1.1077, 1.1117
	sys/dev/pci/pcidevs.h			regen
	sys/dev/pci/pcidevs_data.h		regen
	sys/dev/mii/igphyreg.h			1.6
	sys/dev/mii/ihphy.c			1.1-1.2
	sys/dev/mii/ihphyreg.h			1.1
	sys/dev/mii/inbmphyreg.h		1.3
	sys/dev/mii/files.mii			1.47 via patch
	sys/dev/mii/miidevs			1.97 and 1.100
	sys/dev/mii/miidevs.h			regen
	sys/dev/mii/miidevs_data.h		regen
	sys/arch/i386/conf/ALL			1.280
	sys/arch/i386/conf/GENERIC		1.1001
	sys/arch/i386/conf/INSTALL_FLOPPY	1.11
	sys/arch/i386/conf/XEN2_DOM0		patch
	sys/arch/amd64/conf/GENERIC		1.293
	sys/arch/amd64/conf/XEN3_DOM0		1.61
	share/man/man4/wm.4			1.21-1.24

Apply almost all fixes and improvements from netbsd-6 except for
the rev. 1.196's iqdrops' change.

- Add the detach code.
- Add code for WOL, ASF, IPMI and Intel AMT. WOL is disabled by default
- Add Yet another workaround for ICH8.
- 82576 is dual port, so check the FUNCID and increment the MAC address for
  the 2nd port.
- Fix the names of 82577L[MC] LAN controllers (for mobile).
- Fix CTRL_EXT_SWDPIN() and CTRL_EXT_SWDPIO() macros. The bit order of the
  SW definable pin is not 6543 but 3654!!!
- Rewrite the code to read MAC address from eeprom.
- Add 82580 support.
- 82571 quirk. Only 82571 shares port 0 of EEMNGCTL_CFGDONE.
- The document says that the TDH register must be set after
  TCL.EN is set on 82575 and newer devices.
- Fix some register names. No functional change.
- Omit U+00AE "REGISTERED SIGN" in a product name due to its non-ASCII nature.
- Stop wm(4) from needlessly resetting when you add or delete a vlan(4).
- Fix MAC address check on 8257[156] and 80003 case. Some cards have non 0xffff
  pointer but those don't use alternative MAC address in reality. So we check
  whether the broadcast bit is set or not like Intel's e1000 driver.
  Fixes PR kern/44072 reported by Jean-Yves Moulin.
- Add PCH2(and 82579) support. Fixes PR#46487
- Add yet another 82567V support.
- Add ICH10+HANKSVILL support.
- Add support Intel I350 Ethernet.
- Make vlan and all ip/ip6 checksum offload work for the I350.
- Fix compile error with  WM_DEBUG.
- Fix a bug that PHY isn't set to low-power mode on PCH and PCH2.
- Add WM_DEBUG_NVM. If WM_DEBUG_NVM is enabled, dump the FLASH ROM data.
- Skip 64bit BAR correctly.
- Fix RAL_TABSIZE for ICH8, 82576, 82580 and I350.
- Use 82580(and I350) specific PHY read/write functions. Fixes PR#47542.
- Style fix. Fix typo in comment. Fix comments. Add comments.

Add some IC Plus Corp. devices.

Intel I217 PHY

Add Intel I210 internal PHY.

Add BCM5756.

resync with head

Add BCM5708S, BCM57780, BCM5717C, BCM5719C and BCM5720C.

sync with head

Unlike usbdevs, miidevs needs the vendor name in the product id string.

Add SMSC OUI and LAN8700 and LAN8710/LAN8720 PHY IDs,
at this point just for MIIVERBOSE.

Resync to 2012-11-19 00:00:00 UTC

sync with head

Pull up following revision(s) (requested by msaitoh in ticket #633):
	sys/dev/mii/miidevs: revision 1.106
	sys/dev/mii/miidevs: revision 1.107
	sys/dev/mii/miidevs: revision 1.108
	sys/dev/mii/miidevs: revision 1.109
Sync a comment with a fact.
There is MII_OUI() in miivar.h not mii.h after 2001.
Add VSC8221
Add AR8035
Add another Broadcom OUI and BCM57765 1000BASE-T media interface.
Per PR kern/46961.

Add another Broadcom OUI and BCM57765 1000BASE-T media interface.
Per PR kern/46961.

Add AR8035

sync to latest -current.

sync with head

Add VSC8221

Sync a comment with a fact.
There is MII_OUI() in miivar.h not mii.h after 2001.

Add 88E1114 Phy

Add National DP83849.  Prompted by PR 41256.

Add support for makphy 0x0029 variation found on most recent Globalscale Dreamplug.

sync with head

Add Broadcom BCM5325 and BCM5365.

Catchup with rmind-uvmplock merge.

sync with head

add BCM5785

Sync with HEAD.

sync with head

Fix CS8244 entry (changed to VSC8244).

One more try to get RCSID correct.

Restore $NetBSD$

Add entry for AR8316 Switch

Add Intel 82579

sync with head

Sync with HEAD

Add RDC Semiconductor R6040 10/100 integrated PHY

Add fresh miidevs from HEAD.

Add two phys (Atheros 8021 and Marvell 88E1145)

PR/44080: Grégoire Sutre: Support for the i82577 ethernet PHY

Correct string for BCM5709S.

(Yup, sorry, fix was supposed to be for miidevs and not miidevs.h)

Pull up revisions (requested by msaitoh in ticket #1359):
sys/dev/pci/if_bge.c		1.170-1.181
sys/dev/pci/if_bgereg.h		1.53-1.56
sys/dev/pci/if_bgevar.h		1.2-1.5
sys/dev/pci/pcidevs		1.1017, 1.1021
sys/dev/pci/pcidevs.h		regen
sys/dev/pci/pcidevs_data.h	regen
sys/dev/mii/miidevs		1.89, 1.93
sys/dev/mii/miidevs.h		regen
sys/dev/mii/miidevs_data.h	regen
sys/dev/mii/brgphy.c		1.49, 1.52

- Fix a bug of BGE_RDMA_MODE_FIFO_LONG_BURST definition.
- Fix the bug that both BGE_PCIE and BGE_PCIX are set on PCI-Express devices.
- Add support for BCM5705F,BCM5714,SBCM5715S,BCM5717,BCM5718,BCM5720,BCM5723,
  BCM5724,BCM5751F,BCM5753F,BCM5756,BCM5761,BCM5761E,BCM5761S,BCM5761SE,
  BCM5764,BCM5781,BCM5784M,BCM5903M,BCM57760,BCM57761,BCM57765,BCM57780,
  BCM57781,BCM57785,BCM57788,BCM57790,BCM57791 and BCM57795. Fixes PR#41694.
- Fix misunderstanding the capability for TSO4 on some chips.
- Use proplib for no EEPROM systems (e.g. sparc64 with onboard bge).
- Add debug function to show some flags.
- (brgphy(4)) Add support for BCM5461, BCM5464, BCM5784 and BCM5761.
- (brgphy(4)) Enable brgphy_jumbo_settings().
- (brgphy(4)) Enable the Ethernet@Wirespeed function.
- Add support for device properties to override the mac address and set
  the BGE_NO_EEPROM flag if we have an onboard device w/o SEEPROM.
- Introduce IPMI and ASF related code from FreeBSD. It fixes some problems
  which occured in netboot on sparc64 and PR#32767
- move the code of disabling host interrput in bge_stop() like linux tg3
  driver.
- fix the return value of bge_eeprom_getbyte().
- Fixes the bug that error bits arent cleard because these bit are W2C
  (in other words W1C).
- Many other bugfixes from FreeBSD and OpenBSD.
- remove an unused structure.
- ANSI C, KNF and tabify
- fix typo in comment.

Sync with HEAD.

sync with head.

sync with head

Add Broadcom BCM5481 and BCM5709S - From OpenBSD

Sync with HEAD.

Sync to netbsd-5

Add Broadcom BCM5482.

sync with head

Pull up the following revisions(s) (requested by bouyer in ticket #1268):
	sys/dev/mii/miidevs:	revision 1.90
	sys/dev/pci/pcidevs:	revision 1.1001
	sys/dev/mii/brgphy.c:	revision 1.51
	sys/dev/microcode/bnx/bnxfw.h:	revision 1.3
	sys/dev/pci/if_bnx.c:	revision 1.29
	sys/dev/pci/if_bnxreg.h:	revision 1.9
	sys/dev/pci/if_bnx.c:	revision 1.30

Add support for the Broadcom BCM5709 and BCM5716 chips. Upgrade
the B06 firmware and add the B09 firmware required by the BCM5709.
Replace TX dmamap array with a dynamically-grown list.
Support associated BCM5709CAX and BCM5709C PHYs.

Add BCM5461,BCM5784 and BCM5761.

Add NS DP83865.

Add Marvel 88E1149

Add BCM5709CAX and BCM5709C PHYs.

- add entry for Marvell 88E1149 Gigabit PHY to miidevs
- regenerate (make) miidevs.h and miidevs_data.h

sync with head.

Pull up following revision(s) (requested by msaitoh in ticket #1342):
	sys/dev/pci/if_bge.c: revisions 1.135, 1.146, 1.151-1.152,
					1.155-1.167 via patch
	sys/dev/pci/if_bgereg.h: revisions 1.43, 1.48-1.52
	sys/dev/pci/if_bgevar.h: revision 1.1
	sys/dev/mii/brgphy.c: revisions 1.36, 1.40, 1.43-1.44 and
					1.47-1.48 via patch
	sys/dev/mii/brgphyreg.h: revisions 1.3-1.4
	sys/dev/mii/miidevs: revisions 1.75, 1.77, 1.85
	sys/dev/mii/miidevs.h: regen
	sys/dev/mii/miidevs_data.h: regen
	sys/dev/mii/miivar.h: revision 1.54
For bge:
  - Really set Tx threshold.
  - Fix the case of setting a flag in BGE_PCI_DMA_RW_CTL on
    conventional PCI.
  - Fix some bugs that the driver unable to detect link loss
    (OpenBSD 1.135, FreeBSD 1.102)
  - bge_tick(): fix some extra input error (OpenBSD 1.221 FreeBSD 1.212)
  - Acknowledge link change interrupts by setting the "link changed" bit
    in the status register (used to have no effect). FreeBSD 1.44
    (OpenBSD 1.21)
  - Add some fiber support (OpenBSD 1.220)
  - Set BGE_MISCCFG_KEEP_GPHY_POWER as {Open,Free}BSD and linux.
  - Add special case code to fix a problem with the BCM5704 in TBI
    mode (FreeBSD rev. 1.71, OpenBSD rev. 1.35)
  - Force an interrupt in bge_ifmedia_upd (FreeBSD rev. 1.205, OpenBSD
    rev. 1.242)
  - Add missing workaround for 5705 (FreeBSD rev. 1.44, OpenBSD rev.
    1.21)
  - Don't print error message only when the register is BGE_SRS_MODE.
    It occurs on some environment (and once after boot?). Other *BSDs
    and Linux don't print the error message for all registers.
  - Fix comments.
  - Remove obsolete codes.
  - Add BCM5786 support.
for brgphy:
  - Add some quirk codes.
  - Add support for BCM5462, BCM54K2, BCM5708C, BCM5722, and BCM5906.

Add Broadcom BCM5464 PHY.

Apply patch (requested by msaitoh in ticket #866):
For bge:
  - Fix the case of setting a flag in BGE_PCI_DMA_RW_CTL on
    conventional PCI.
  - Fix some bugs that the driver unable to detect link loss
    (OpenBSD 1.135, FreeBSD 1.102)
  - bge_tick(): fix some extra input error (OpenBSD 1.221 FreeBSD 1.212)
  - Acknowledge link change interrupts by setting the 'link changed' bit
    in the status register (used to have no effect). FreeBSD 1.44
    (OpenBSD 1.21)
  - Add some fiber support (OpenBSD 1.220)
  - Set BGE_MISCCFG_KEEP_GPHY_POWER as {Open,Free}BSD and linux.
  - Add special case code to fix a problem with the BCM5704 in TBI
    mode (FreeBSD rev. 1.71, OpenBSD rev. 1.35)
  - Force an interrupt in bge_ifmedia_upd (FreeBSD rev. 1.205, OpenBSD
    rev. 1.242)
  - Add missing workaround for 5705 (FreeBSD rev. 1.44, OpenBSD rev.
    1.21)
  - Don't print error message only when the register is BGE_SRS_MODE.
    It occurs on some environment (and once after boot?). Other *BSDs
    and Linux don't print the error message for all registers.
  - Fix comments.
  - Remove obsolete codes.
For brgphy:
  - Add some quirk codes.
  - Add support for BCM5462, BCM54K2 and BCM5722.

Sync with HEAD.

sync with head.

Add Marvell 88E1116R PHY.

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

sync with head.

Pull up following revision(s) (requested by sborrill in ticket #721):
	sys/dev/mii/miidevs: revision 1.81-1.83
Add ATHEROS F1 and F2 PHYs.
Add ATTANSIC and their L1/L2 PHYs.
Add a comment explaining how to regenerate miidevs.h and miidevs_data.h.

Sync with HEAD.

Oooops. Back out some of previous my commit.

Some fixes and enhancements:

  Both if_bge* and brgphy.[ch]:
    Check the parent's MAC and use the quirk code for the bug like OpenBSD and
    FreeBSD. Some bugs can't identify the PHY ID. For example, 5704 Ax has the
    ADC bug, but 5704 A3 and 5704 B0 have the same PHY ID and revision. Add
    BGE_PHY_CRC_BUG, BGE_PHY_ADC_BUG, BGE_PHY_5704_A0_BUG, BGE_PHY_JITTER_BUG,
    BGE_PHY_ADJUST_TRIM and BGE_PHY_BER_BUG for this flag. Some of the DSP
    patches are newly taken from OpenBSD and FreeBSD.

  if_bge*:
    Remove duplicated BGE_CHIPID_BCM5714_A0 entry in the known CHIPID table.
    Fix obsolete comments.

  brgphy.[ch]:
    Add some PHY IDs.

TODO:
  Add more three quirk code into bge and brgphy (the brgphy side's are
  currently #if0'ed).
  Add support for bnx into brgphy (currently #if0'ed)

Add some boradcom's PHYs.
Sort.

add some CICADA PHYs. from FreeBSD.

Sync with HEAD.

add ATTANSIC and their L1/L2 PHYs
ok cube@

add a comment explaining how to regenerate miidevs.h and miidevs_data.h

Sync with HEAD.

Sync with HEAD.

add ATHEROS F1 and F2 PHYs

Fix a botched comment.

PR/39094 - Kaspar Brand -- Add et (Agere ET1310/ET1301) netowrk driver

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

Add JMicron OUI, and JMC2[56]0 PHYs.

Sync with HEAD.

Sync with wrstuden-revivesa-base-2.

PR 39241: Add support for Broadcom BCM5906(M) from Karl Uwe Lockhoff

Sync with HEAD.

sync with head.

sync with head.

Remove clause 3 and 4 from TNF licenses

sync with HEAD

sync with head.

Add BCM5708C 1000BASE-T media interface, from FreeBSD

Sync with HEAD.

sync with head

sync with HEAD

Sync with HEAD

Add Marvell 88E1116 Gigabit PHY.

sync with HEAD

sync with head.

Sync with HEAD.

Follow the merge of pmap.c on i386 and amd64 and move
pmap_init_tmp_pgtbl into arch/x86/x86/pmap.c. Modify the ACPI wakeup
code to restore CR4 before jumping back into kernel space as the large
page option might cover that.

sync with head.

Sync with head.

Add Realtek RTL8211, which has the same ID with 8169S/8110S internal PHY.

Sync with head.

Pull up following revision(s) (requested by msaitoh in ticket #1842):
	sys/dev/mii/miidevs: revisions 1.69, 1.71
	sys/dev/mii/brgphy.c: revisions 1.31 - 1.34
Add support for BCM5752, BCM5754 and BCM5755.
Fix the problem "ifconfig bge0 media auto" negotiates to 100Mbps
on 1000BaseT HUB.

Sync with HEAD.

sync with head.

Sync with HEAD.

Sync w/ NetBSD-4-RC_1

Pull up following revision(s) (requested by phil in ticket #819):
	sys/dev/mii/miidevs.h: regen
	sys/dev/mii/miidevs: revision 1.71
	sys/dev/pci/if_bge.c: revision 1.133
	sys/dev/pci/if_bge.c: revision 1.134
	sys/dev/pci/if_bgereg.h: revision 1.43
	sys/dev/mii/brgphy.c: revision 1.34
	sys/dev/mii/miidevs_data.h: regen
Add BCM5755 and 5754 Gig-E PHYs.
Regen for BCM5755 and 5754.
Add support for BCM5754 and BCM5755.  From suggestions from Jonathan
Stone.
Add a couple more BGE_CHIPIDs
Add support for BCM5755 and BCM5754/5787.  Suggestions from Jonathan
Stone and fixes from OpenBSD for various hardware bugs/errata.
Disable firmware fastboot on 5754 and 5755.  From FreeBSD by way of Phil
Nelson.

Pull up following revision(s) (requested by masanobu in ticket #850):

sys/dev/pci/if_wm.c		1.137
sys/dev/pci/if_wm.c		1.138
sys/dev/pci/if_wm.c		1.141
sys/dev/pci/if_wm.c		1.144
sys/dev/pci/if_wmreg.h		1.23
sys/dev/pci/pcidevs		1.893
sys/dev/pci/pcidevs.h		regen
sys/dev/pci/pcidevs_data.h	regen
sys/dev/mii/igphy.c		1.12
sys/dev/mii/miidevs		1.72
sys/dev/mii/miidevs.h		regen
sys/dev/mii/miidevs_data.h	regen
share/man/man4/wm.4		1.18

Fix for 82541 and 82547's reset bug.
Modify wm_reset() to make some device stable.
Add ICH9 support to wm.
Add I82566 support to igphy.

Pulled done via patch.

add Intel I82566

Sync with HEAD.

Sync with HEAD.

Sync with HEAD.

Add BCM5755 and 5754 Gig-E PHYs.

file miidevs was added on branch matt-mips64 on 2007-08-06 12:07:01 +0000

Add BCM5755 and 5754 Gig-E PHYs.

pullup the following revisions (requested by msaitoh in ticket 1681):
	sys/dev/pci/if_wm.c			1.104-1.105, 1.116-1.121,
						1.127,1.133-1.134 via patch
	sys/dev/pci/if_wmreg.h			1.17-1.20
	sys/dev/pci/pcidevs			patch
	sys/dev/mii/igphy.c			1.11
	sys/dev/mii/makphy.c			1.20, 1.23
	sys/dev/mii/ikphy.c			patch
	sys/dev/mii/ikphyreg.h			patch
	sys/dev/mii/miidevs			1.68
	sys/dev/mii/files.mii			1.39
	sys/arch/i386/conf/GENERIC		1.788-1.789 via patch
	sys/arch/i386/conf/GENERIC.MPACPI	patch
	sys/arch/i386/conf/GENERIC_LAPTOP	1.209 via patch
	sys/arch/i386/conf/INSTALL		1.291 via patch
	sys/arch/i386/conf/INSTALL_LAPTOP	1.104 via patch
	sys/arch/i386/conf/XEN2_DOM0		1.13 via patch
	share/man/man4/wm.4			1.14-1.16
Add support for many cards (include PCI-express based chips).
Many bug fixes about auto negotiations (PR#30078, PR#30490,
PR#30906, PR#33429 and PR#35386).
Fix media link issues with fiber-based card (PR#35797).

Pull up following revision(s) (requested by tsutsui in ticket #1673):
	distrib/sets/lists/man/mi		1.844, 1.871
	share/man/man4/Makefile			1.372, 1.379 via patch
	share/man/man4/re.4			1.8, 1.9, 1.11, 1.12
	share/man/man4/rgephy.4			1.1
	share/man/man4/rlphy.4			1.1, 1.2
	sys/arch/amd64/conf/GENERIC		1.79, 1.89
	sys/arch/amd64/conf/INSTALL		1.45, 1.49
	sys/arch/i386/conf/GENERIC		1.717, 1.747
	sys/arch/i386/conf/GENERIC_LAPTOP	1.164
	sys/arch/i386/conf/INSTALL		1.277, 1.283
	sys/arch/i386/conf/INSTALL_LAPTOP	1.96, 1.98
	sys/arch/i386/conf/XEN2_DOM0		1.22 via patch
	sys/arch/macppc/conf/GENERIC		1.220, 1.246
	sys/arch/macppc/conf/INSTALL		1.96, 1.100
	sys/dev/cardbus/if_re_cardbus.c		1.10
	sys/dev/cardbus/if_rtk_cardbus.c 	1.29-1.31
	sys/dev/ic/rtl8169.c			1.14, 1.20, 1.24, 1.25, 1.28-1.61, 1.63, 1.64-1.81 via patch
	sys/dev/ic/rtl81x9.c			1.52, 1.54-1.63, 1.65, 1.67-1.70
	sys/dev/ic/rtl81x9reg.h			1.15-1.26
	sys/dev/ic/rtl81x9var.h			1.19, 1.21-1.37
	sys/dev/mii/files.mii			1.38
	sys/dev/mii/miidevs			1.62, 1.64
	sys/dev/mii/rgephy.c			1.10, 1.13-1.16
	sys/dev/mii/rlphy.c			1.1, 1.6, 1.7, 1.11 via patch
	sys/dev/pci/if_re_pci.c			1.13, 1.15-1.17, 1.19-1.23
	sys/dev/pci/if_rtk_pci.c		1.25, 1.28, 1.29, 1.31
	sys/dev/pci/pcidevs			1.851, 1.852

on re(4):
- improve stability (I believe ;-)
- add a workaround for hardware ip4csum-tx bug
- support newer chips (8169SB/SC, PCIe based 8168 etc.)
- fix 8139C+ support
- enable hardware VLAN
- misc bus_dma(9) fix (which makes re(4) work on mips ports)

on rtk(4):
- fix kern/31348
- fix possible panic on dreamcast

- sync with head.
- move sched_changepri back to kern_synch.c as it doesn't know PPQ anymore.

sync with head.

Add Marvell 88E6060 10/100 5-port PHY switch

Sync with head.

sync with head.

sync with head.

Add BCM5752 Gig-E PHY. From Matthias Drochner and FreeBSD/OpenBSD.

Sync with head.

sync with head

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Add Intel 82562G PHY.

sync with head

sync with head.

Sync with head.

Merge 2006-05-24 NetBSD-current into the "peter-altq" branch.

sync with head.

sync with head

Pull up following revision(s) (requested by jonathan in ticket #1292):
	sys/dev/mii/brgphy.c: revision 1.27
	sys/dev/mii/miidevs: revision 1.66
Add PHY ID for the integral 1000base-T PHY in the bcm5780 (also known
as Broadcom/Serverworks HT-2000).  Following the Broadcom-supplied
Linux driver, update brgphy.c to treat the bcm5780 integral copper PHY
just like the 5714/5715 PHY.
For NetBSB-3 pullup purposes, this commit includes:
src/sys/dev/mii/miidevs	      revision:	  1.65 -> 1.66
src/sys/dev/mii/brgphy.c      revision:	  1.26 -> 1.27
plus a regen of src/sys/dev/mii/{miidevs.h,miidevs_data.h}.

Add PHY ID for the integral 1000base-T PHY in the bcm5780 (also known
as Broadcom/Serverworks HT-2000).  Following the Broadcom-supplied
Linux driver, update brgphy.c to treat the bcm5780 integral copper PHY
just like the 5714/5715 PHY.

For NetBSB-3 pullup purposes, this commit includes:

src/sys/dev/mii/miidevs 	revision:	1.65 -> 1.66
src/sys/dev/mii/brgphy.c	revision:	1.26 -> 1.27

plus a regen of src/sys/dev/mii/{miidevs.h,miidevs_data.h}.

Sync with head.

sync with head.

sync with head.

Merge 2006-03-28 NetBSD-current into the "peter-altq" branch.

Fix typo,  reported by seebs in PR 33106.

add an rlphy clone from IC Plus.  from openbsd.

sync with head.

Add the DP83847 PHY.  From seebs in kern/32866

sync with head.

Add Realtek RTL8201L. From OpenBSD

Pull up following revision(s) (requested by jonathan in ticket #1044):
	sys/dev/mii/brgphy.c: revision 1.24
	sys/dev/mii/miidevs: revision 1.61
Add PHY mii-id for the Broadcom 1000base-T PHY integral to the
bcm5714, added yesterday to sys/dev/pci/if_bge.c in revision 1.98,
since it appears the 5714 has a new PHY revision.  Pending further
details, follow the FreeBSD code (as submitted by
John Cagle <john dot cagle at hp dot com> and committed by
ps@FreeBSD.ORG), and treat the 5714 integral PHY the same way as we
treat the bcm5750 integral PHY.

Sync with head.

Add PHY mii-id for the Broadcom 1000base-T PHY integral to the
bcm5714, added yesterday to sys/dev/pci/if_bge.c in revision 1.98,
since it appears the 5714 has a new PHY revision.  Pending further
details, follow the FreeBSD code (as submitted by
John Cagle <john dot cagle at hp dot com> and committed by
ps@FreeBSD.ORG), and treat the 5714 integral PHY the same way as we
treat the bcm5750 integral PHY.

Sync with HEAD. Here we go again...

Pull up following revision(s) (requested by kiyohara in ticket #760):
	sys/dev/mii/dmphy.c: revision 1.21
	sys/dev/mii/miidevs: revision 1.60
Add DAVICOM DM9102.

Add DAVICOM DM9102.

Pull up revision 1.59 (requested by briggs in ticket #523):
Marvell 88E1111 from Dave Huang in PR kern/30556

Marvell 88E1111 from Dave Huang in PR kern/30556

sync with -current

Sync with HEAD.

sync with head.  xen and whitespace.  xen part is not finished.

Add new/alternate OUI for CICADA that's been spotted in a VIA VT6122.
Submitted in PR 29705 from Tomokazu HARADA.

Sync with HEAD.

Hi Perry!

Add driver for 10/100/1000 copper PHY integrated on VIA Networking Technologies
VT6122 gigabit ethernet chips

From FreeBSD

Sync with HEAD.

Sync with HEAD.

Add entry for Broadcom BCM5222 Dual 10/100 media interface.

Add PHY models for integrated 1000baseT PHYs in Realtek 8169S chips,
in two flavours: one with non-IEEE OUI code from FreeSD if_re(4) mii
driver for early 8169S, and a second IEEE-compliant version as
observed on Netgear GA-511 with newer 8196S stepping.

Sync with HEAD.

Add BCM4401 phy

Sync with HEAD.

Add an entry for the PHY found with BCM575x chips.

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Add LXT973/974/975 PHYs

Make the name of the IGPE1000 a bit clearer.

Add Intel IGP01E1000 phy.

Add support for the BCM5705:
- Only BCM5705M asic rev A1 was tested.

Thanks to Bill Paul (wpaul@freebsd.org) for help and support.

Approved by: Frank van der Linden <fvdl@netbsd.org>

Add ICS1889 and 1892

Add entry for Broadcom's BCM5214 Quad 10/100 media interface.

Pullup revisions 1.42-1.44 (requested by fvdl in ticket #1126)
 Pullup support for bge device. (Broadcom Gigabit Ethernet)

Add AMD Am79C87[45] (which use the Altima OUI).

Sync with HEAD.

Add altima (broadcom) AC101L, phy for 3com 3c905cx-tx on nForce2 MCP-T.

Add PHY entry for bcm5704c (copper) integral phy to miidevs.
Add 5704 phy and dsp patch, and untestsed dsp patch for 5703, to brgphy.c.

Sync with HEAD.

Add BCM5703.

Pull up revision 1.41 (requested by thorpej in ticket #648):
  Add ID for Marvell 881011 phy found on newer i8254x-based
  gig-ether cards.

Catch up to -current

Add MYSON MTD803

sync kqueue branch with HEAD

catch up with -current.

Catch up to -current.

Add ID for Marvell 881011 phy found on newer i8254x-based gig-e cards.

Catch up to -current.

catch up with -current.

Add Broadcom BCM5421 and BCM5701.  Spurred by pullup-1-6 ticket #486
(matt).

Add Broadcom BCM5421

After I found a press release of 1998 which states that AMD sold
Davicom PHY chips, merge the identical entries for DM9101 and Am79c873
into one.
Should also fix PR kern/17369 by Dave Huang.

catch up with -current on kqueue branch

Aff BCM 5701 PHY Id.

Catch up to -current.

Correct/add more PMC-Sierra PHYs

Add another PMC-SIERRA phy

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Catch up with -current.

add support for LXT971 PHYs.

Catch up to -current.

Sync w/ -current.

Add ICS 1893

Add another Marvell 88E1000 PHY model number.

Sync kqueue branch with -current.

Catch up to -current.

Add another Altima PHY.  From Peter Seebach.

Catch up to -current.

Update the kqueue branch to HEAD.

Merge Aug 24 -current into the kqueue branch.

Back out previous; closer inspection of the manual reveals that the
Am79c874 has the same ID register contents as the AC101.

Add AMD Am79c874 NetPHY-1LP.

Improve the AMD PHY names.

Catch up with -current.

The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
onto the MII bus.  Recognize it.

update to -current

Fixup some Broadcom entries, add an entry for Broadcom PHY that
is built-in to some 3Com 3c905B cards.

Bleh, I don't like the way our miidevs works now.  Repair the
Marvell Semiconductor entry.

Add LevelOne LXT-1000 10/100/1000 PHY, clean up some Gig-E
PHY names.

Correct Marvell OUI, and 88E1000 model number.

Catch up to -current.

Add Seeq 80225 10/100 PHY.

Add several additional PHYs.

Add product ID for the NatSemi DP83891 1000baseTX PHY.

Add i82562ET id.

argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
They managed to mess it up in a new way.

Add OUI for PMC-Sierra.  Add BCM5221 Phy.  Add PM8351 Phy.