CVS log for src/sys/arch/vax/conf/INSTALL

Up to [cvs.NetBSD.org] / src / sys / arch / vax / conf

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by tsutsui in ticket #79):

	sys/arch/vax/conf/GENERIC: revision 1.217
	sys/arch/vax/conf/VAX780: revision 1.34
	sys/arch/vax/conf/files.vax: revision 1.126
	sys/arch/vax/vsa/smg.c: revision 1.63
	sys/arch/vax/include/qdreg.h: revision 1.7
	sys/arch/vax/vax/conf.c: revision 1.69
	sys/arch/vax/conf/INSTALL: revision 1.76
	sys/arch/vax/vsa/gpx.c: revision 1.1

Add a support for gpx(4) color framebuffer found on VAXstation 3100.

Ported from OpenBSD/vax. Note smg(4) monochrome onboard framebuffer
driver is also changed attached only if gpx(4) is not installed
or flags 1 is specified in config files, as OpenBSD did.

Tested on my VAXstation 3100/m30 with and without 8bpp gpx(4).

Revied on port-vax@ and "Please go ahead!" from ragge@.
https://mail-index.netbsd.org/port-vax/2023/01/thread1.html#004147

Add comments that "options VAX410" also supports VS3100/m30,m38,m40,m48.

Add a support for gpx(4) color framebuffer found on VAXstation 3100.

Poted from OpenBSD/vax. Note smg(4) monochrome onboard framebuffer
driver is also changed attached only if gpx(4) is not installed
or flags 1 is specified in config files, as OpenBSD did.

Tested on my VAXstation 3100/m30 with and without 8bpp gpx(4).
Revied on port-vax@ and "Please go ahead!" from ragge@.
 https://mail-index.netbsd.org/port-vax/2023/01/thread1.html#004147

Worth to pullup to netbsd-10.

Merge changes from current as of 20200406

Sync with head.

Remove FDDI support.

Synch with HEAD

Enable CPU_IN_CKSUM.

update from HEAD

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
  since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
  many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Sync with HEAD

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

Fix TC adaptor's CSR address.
Add "PMAD" LANCE TC Ethernet.

Sync with HEAD

Remove KMEMSTATS.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Rebase to HEAD as of a few days ago.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

sync with head

Bump INSTALL ramdisk size slightly to allow building with DBG=-g.

bump md image size

resync from head

the bogus number police

remove confusing numeric locators where they are unused.

Resync to 2012-11-19 00:00:00 UTC

sync with head

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
  and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

Pull up following revision(s) (requested by abs in ticket #446):
	gnu/dist/gcc4/gcc/config/vax/vax.md: revision 1.16
	external/gpl3/binutils/dist/gas/config/tc-vax.c: revision 1.6
	distrib/vax/ramdisk/Makefile: revision 1.27
	gnu/dist/gcc4/gcc/config/vax/builtins.md: revision 1.4
	external/gpl3/binutils/dist/bfd/elf32-vax.c: revision 1.6
	sys/arch/vax/conf/INSTALL: revision 1.59
Two fixes.  Better PLT pruning (don't emit PLTs for local functions).
If emitting a reloc against a readonly section in a shared image,
cause TEXTREL to be set.
Warn about using a symbol as a displacement in PIC mode.
Fix ffssi2 again.
Use a UNSPEC for the internal ffs.
use (match_dup 1) since Z will be set if it is 0 just as if tst:SI was done.
This can let gcc produce better code if you code appropriately.
Bump the ramdisk size so that the contents fits again.

Pull up following revision(s) (requested by abs in ticket #405):
	etc/etc.vax/MAKEDEV.conf: revision 1.15
	etc/etc.vax/MAKEDEV.conf: revision 1.16
	sys/arch/vax/conf/INSTALL: revision 1.61
	sys/arch/vax/conf/INSTALL: revision 1.62
	distrib/vax/install.md: file removal
	distrib/vax/ramdisk/list: revision 1.30
	distrib/vax/miniroot/list: revision 1.15
	distrib/vax/miniroot/Makefile.inc: revision 1.22
	distrib/vax/ramdisk/Makefile: revision 1.30
	distrib/vax/ramdisk/dot.profile: revision 1.9
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)
Sync devices with GENERIC, and include bpfilter to allow dhcpcd to work
Ensure the ramdisk has bpf for dhcpcd

Pull up revisions:
  src/etc/etc.vax/MAKEDEV.conf revision 1.14
  src/sys/arch/vax/conf/GENERIC revision 1.182
  src/sys/arch/vax/conf/INSTALL revision 1.60
  src/sys/arch/vax/conf/VAX780 revision 1.9
  src/sys/arch/vax/conf/majors.vax revision 1.24
  src/sys/arch/vax/vax/disksubr.c revision 1.53
  src/sys/dev/DEVNAMES revision 1.275
  src/sys/dev/mscp/files.mscp revision 1.8
  src/sys/dev/mscp/mscp_disk.c revision 1.72
  src/sys/dev/mscp/mscp_subr.c revision 1.42
  src/distrib/vax/ramdisk/Makefile revision 1.29
(requested by abs in ticket #385).

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
 to mixing them in with the ra* disks, modelled loosely on how MSCP
 rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
 rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

Include racd0 and racd1 on ramdisk

Sync devices with GENERIC, and include bpfilter to allow dhcpcd to work

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
  to mixing them in with the ra* disks, modelled loosely on how MSCP
  rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
  rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

sync with head

sync to latest -current.

Bump the ramdisk size so that the contents fits again.

merge to -current.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself.  Move it to std.  This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports.  Thanks to Havard Eidnes for
pointing them out.

dependant -> dependent

Sync with HEAD.

sync with head

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

sync with head

Add QUOTA2 where QUOTA is enabled (and QUOTA2 commented out where QUOTA
is commented out)

Remove unused count from pseudo-device md.

sync with head.

sync with head

Sync with HEAD.

Remove unused count (invariably "4") from pseudo-device fss.

sync with head.

Sync with HEAD.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Sync with HEAD.

Sync with HEAD.

Update haad-dm branch to haad-dm-base2.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

Sync with HEAD.

Sync with HEAD.

Sync with wrstuden-revivesa-base-2.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

Sync w/ -current. 34 merge conflicts to follow.

sync with head

Sync with HEAD.

Add options COMPAT_40 to files which have options COMPAT_30.

Sync with HEAD.

sync with head.

sync with HEAD

sync with head.

Update to new world order

Sync with head.

sync with head.

update comments on NFS_V2_ONLY after nqnfs removal.  no functional changes.
from Arnaud Lacombe.

Sync with head.

sync with head

remove MALLOC_NOINLINE, it doesn't do anything anymore.

sync with head

sync with head.

Sync with head.

sync with head.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter is already supported.

bpfilter doesn't accept count anymore.

Remove the tablet line discipline.

Sync with head.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Sync with HEAD. Here we go again...

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Sync with HEAD.

sync with head.

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Sync with HEAD.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
  have a disk.  Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sync with HEAD.

Add COMPAT_BSDPTY to the rest of the config files.

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Pull up revision 1.32 (requested by atatat in ticket #663):
	Add "options SYSCTL_INCLUDE_DESCR" to a lot of configurations,
	but commented out in most of them.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Uppercase CPU, plural is CPUs.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more.  see tech-security

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

enable USERCONF by default; it's small and extremely useful to have available.

sync kqueue branch with HEAD

Catch up to -current.

catch up with -current.

catch up with -current.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

catch up with -current on kqueue branch

Catch up to -current.

pullup-1-6 ticket #203:

syssrc/sys/arch/vax/conf/GENERIC 1.98
syssrc/sys/arch/vax/conf/INSTALL 1.27

Original log message:

Change the uba devices from "xx0" to "xx*". Even if they have an exact
csr there may be multiple uba's in a machine and therefore multiple
matches for devices.

Change the uba devices from "xx0" to "xx*". Even if they have an exact
csr there may be multiple uba's in a machine and therefore multiple
matches for devices.

Add the INCLUDE_CONFIG_FILE option to all config files.  In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Catch up to -current.

Add commented-out USERCONF option.  Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Make ramdisk 1.5MB in size.  cleanup miniroot makefile

Add missing wskbd

Adapt to recent dz/wscons changes

Catch up with -current.

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
  are now consistently named
* fold opt_mdsize.h into opt_md.h

Catch up to -current.

Sync w/ -current.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Sync kqueue branch with -current.

Catch up to -current.

Add forgotten "hdc" and "rd" disks.

cleanup:
	options SPACE TAB
	makeoptions TAB
	psuedo-device TAB
	remove trailing whitespace
	replace multiple spaces -> tabs
	options "FOO" -> options FOO
	options "FOO=bar" -> options FOO=bar
	options "FOO=\"bar\"" -> options FOO="\"bar\""

Catch up to -current.

file INSTALL was added on branch nathanw_sa on 2002-01-08 00:28:30 +0000

Add a VAXANY type.  Eventually to used in INSTALL / GENERIC to easily
include support for all VAX platforms

Add VAX640

Pull up revision 1.12 (requested by matt):
  Add VAX 4000/200.

Sync with HEAD.

A bunch of new CPUs that are supported, from Michael Kukat
(michael@unixiron.org). Among them are 4000/400, 4000/500 and 4000/105A.

Sync with HEAD

Remove "rnd is EXPERIMENTAL" comments.

Pull up revision 1.11 (requested by matt):
  Enable VS4000/90 SCSI controller.

Sync with HEAD (for UBC fixes).

Add VAX 4000/200

Sync with HEAD.

Enable VS4000/90 SCSI controller in INSTALL kernel.

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device  pty             2       # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings

add a COMPAT_15 and remove TCP_COMPAT_42

Sync w/ netbsd-1-5-base.

Rename ncr[5380] device to si to more consistent with other ports.
Add VAX660 to cputype.h.  Remove needs-flag from si & asc entries.

Comment out asc0 for vs4000/90.  remove slip/ppp.

Sync closer to GENERIC.

Change some install options. From Todd Whitesel.

Apply patch (requested by toddpw):
  Finish porting sysinst to vax, and build various bootable installers
  in new directory distrib/vax/bootfs.

Update from trunk.

It's time to be COMPAT_14.

Slimmed install kernel with md-root.