Annotation of src/sys/arch/sparc64/conf/GENERIC, Revision 1.98
1.98 ! tron 1: # $NetBSD: GENERIC,v 1.97 2008/01/05 20:38:31 jdc Exp $
1.45 gmcgarry 2: #
3: # GENERIC machine description file
1.53 tsutsui 4: #
1.45 gmcgarry 5: # This machine description file is used to generate the default NetBSD
6: # kernel. The generic kernel does not include all options, subsystems
7: # and device drivers, but should be useful for most applications.
8: #
9: # The machine description file can be customised for your specific
10: # machine to reduce the kernel size and improve its performance.
11: #
12: # For further information on compiling NetBSD kernels, see the config(8)
13: # man page.
14: #
15: # For further information on hardware support for this architecture, see
16: # the intro(4) man page. For further information about kernel options
17: # for this architecture, see the options(4) man page. For an explanation
18: # of each device driver in this file see the section 4 man page for the
19: # device.
1.1 eeh 20:
1.53 tsutsui 21: include "arch/sparc64/conf/std.sparc64"
22:
23: options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24:
1.98 ! tron 25: #ident "GENERIC-$Revision: 1.97 $"
1.53 tsutsui 26:
27: maxusers 64
28:
29: ## System kernel configuration. See options(4) for more detail.
30:
31:
32: # Options for variants of the Sun SPARC architecure.
33: # We currently support three architecture types; at least one is required.
34: options SUN4U # sun4u - UltraSPARC
35: #options BLINK # blink the system LED
36:
37: #### System options that are the same for all ports
38:
39: ## Root device configuration: change the ?'s if you are going to use a
40: ## nonstandard root partition (other than where the kernel is booted from)
41: ## and/or nonstandard root type (not ffs or nfs). Normally this can be
42: ## automagically determined at boot time.
43:
44: config netbsd root on ? type ?
45:
46: ## UVM options.
47: #options UVM_PAGE_TRKOWN
48: #options UVMHIST
49: #options UVMHIST_PRINT # Loud!
50:
51: ## System call tracing (see ktrace(1)).
52: options KTRACE
1.23 hubertf 53:
1.53 tsutsui 54: ## Collect statistics on kernel malloc's and free's. This does have a
55: ## significant performance hit on slower machines, so it is intended for
56: ## diagnostic use only.
57: #options KMEMSTATS
1.43 thorpej 58:
1.53 tsutsui 59: ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
60: options SYSVMSG # System V message queues
61: options SYSVSEM # System V semaphores
62: options SYSVSHM # System V shared memory
63: #options SHMMAXPGS=1024 # 1024 pages is the default
64: options P1003_1B_SEMAPHORE # p1003.1b semaphore support
1.1 eeh 65:
1.41 eeh 66:
1.53 tsutsui 67: ## Loadable kernel module support; still under development.
68: options LKM
69:
70: options USERCONF # userconf(4) support
71: #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
72: options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
73:
74: # Enable experimental buffer queue strategy for better responsiveness under
75: # high disk I/O load. Use it with caution - it's not proven to be stable yet.
76: #options BUFQ_READPRIO
77: #options BUFQ_PRIOCSCAN
78:
79: ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM
80: options NFS_BOOT_BOOTPARAM
81: #options NFS_BOOT_BOOTP
82: options NFS_BOOT_DHCP
83:
84: #### Debugging options
85:
86: ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
87: ## serial console break or keyboard reset, where the PROM would normally
88: ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
89: # we enable DDB in GENERIC for now.
90: options DDB # kernel dynamic debugger
91: options DDB_HISTORY_SIZE=100 # enable history editing in DDB
1.91 martin 92: options DDB_VERBOSE_HELP # enable verbose online help
1.62 jnemeth 93: #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
1.53 tsutsui 94:
95: ## You may also use gdb, on another computer connected to this machine over
96: ## a serial port.
1.71 martin 97: # options KGDB
98: # options KGDB_DEVNAME="\"sabtty1\"" # kgdb device name
99: # options KGDB_DEVRATE=38400 # baud rate (defaults to 9600)
1.53 tsutsui 100:
101:
102: ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
103: ## such that gdb(1) can be used on a kernel coredump.
1.41 eeh 104:
1.50 martin 105: #makeoptions DEBUG="-g"
1.53 tsutsui 106:
107:
108: ## Adds code to the kernel that does internal consistency checks, and will
109: ## cause the kernel to panic if corruption of internal data structures
110: ## is detected.
111: #options DIAGNOSTIC # extra kernel sanity checking
112:
113: ## Enable (possibly expensive) debugging code that may also display messages
114: ## on the system console
1.41 eeh 115: #options DEBUG
1.53 tsutsui 116: #options LOCKDEBUG
1.41 eeh 117: #options SYSCALL_DEBUG
1.53 tsutsui 118:
119: ## Make SCSI error messages more verbose when explaining their meanings.
120: options SCSIVERBOSE
121: options PCIVERBOSE
122: options MIIVERBOSE # verbose PHY autoconfig messages
123: #options PCI_CONFIG_DUMP # verbosely dump PCI config space
124:
125: ## `INSECURE' turns off the kernel security level (securelevel = 0 always).
126: ## This allows writing to /dev/mem, loading kernel modules while multi-user,
127: ## and other insecurities good only for development work. Do not use this
128: ## option on a production machine.
129: #options INSECURE
130:
131: ## `FDSCRIPTS' allows non-readable but executable scripts by providing a
132: ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
133: ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
134: ## opaque file mechanism. Perl calls this "secure setuid scripts."
135:
136: #options FDSCRIPTS
137: #options SETUIDSCRIPTS
138:
139: ## Options for compatibility with previous releases foreign system binaries.
140: ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
141: ## additional user-level utilities or system configuration files. See
142: ## compat_sunos(8) and compat_svr4(8).
143:
144: options COMPAT_43 # 4.3BSD system interfaces
145: options COMPAT_09 # NetBSD 0.9 binary compatibility
146: options COMPAT_10 # NetBSD 1.0 binary compatibility
147: options COMPAT_11 # NetBSD 1.1 binary compatibility
148: options COMPAT_12 # NetBSD 1.2 binary compatibility
149: options COMPAT_13 # NetBSD 1.3 binary compatibility
150: options COMPAT_14 # NetBSD 1.4 binary compatibility
151: options COMPAT_15 # NetBSD 1.5 binary compatibility
152: options COMPAT_16 # NetBSD 1.6 binary compatibility
153: options COMPAT_20 # NetBSD 2.0 binary compatibility
154: options COMPAT_30 # NetBSD 3.0 binary compatibility
155: options COMPAT_SUNOS # SunOS 4.x binary compatibility
156: options COMPAT_SVR4 # SunOS 5.x binary compatibility
157: options COMPAT_SVR4_32 # SunOS 5.x 32-bit binary compatibility -- 64-bit only
158: options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility -- 64-bit only
159: options EXEC_AOUT # execve(2) support for a.out binaries
160: options EXEC_ELF32 # Exec module for SunOS 5.x binaries.
161:
162: #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
163: options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
164:
165: ## File systems. You probably need at least one of FFS or NFS.
166: file-system FFS # Berkeley Fast Filesystem
167: file-system NFS # Sun NFS-compatible filesystem client
168: file-system KERNFS # kernel data-structure filesystem
169: file-system NULLFS # NULL layered filesystem
170: file-system OVERLAY # overlay file system
171: file-system MFS # memory-based filesystem
172: file-system FDESC # user file descriptor filesystem
173: file-system UMAPFS # uid/gid remapping filesystem
174: file-system LFS # Log-based filesystem (still experimental)
175: file-system PORTAL # portal filesystem (still experimental)
176: file-system PROCFS # /proc
177: file-system CD9660 # ISO 9660 + Rock Ridge file system
178: file-system UNION # union file system
179: file-system MSDOSFS # MS-DOS FAT filesystem(s).
180: file-system PTYFS # /dev/pts/N support
181: file-system SMBFS # experimental - CIFS; also needs nsmb (below)
1.77 jmmv 182: file-system TMPFS # Efficient memory file-system
1.53 tsutsui 183: #file-system UDF # experimental - OSTA UDF CD/DVD file-system
184:
185: ## File system options.
186: options NFSSERVER # Sun NFS-compatible filesystem server
187: options QUOTA # FFS quotas
188: #options FFS_EI # FFS Endian Independent support
189: options SOFTDEP # FFS soft updates support.
190: #options FFS_NO_SNAPSHOT # No FFS snapshot support
191:
192: ## Network protocol support. In most environments, INET is required.
193: options INET # IP (Internet Protocol) v4
194: options INET6 # IPV6
195: #options IPSEC # IP security
196: #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
197: #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
198: #options IPSEC_DEBUG # debug for IP security
199: #options GATEWAY # packet forwarding ("router switch")
200: options MROUTING # packet forwarding of multicast packets
201: options PIM # Protocol Independent Multicast
202: #options DIRECTED_BROADCAST # allow broadcasts through routers
1.88 adrianp 203: #options ISO,TPIP # OSI networking
204: #options EON # OSI tunneling over IP
1.53 tsutsui 205: options NETATALK # AppleTalk (over Ethernet) protocol
206: options NTP # Network Time Protocol in-kernel support
207: #options PPS_SYNC # Add serial line synchronization for NTP
208: options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs.
209: options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device
1.64 christos 210: options IPFILTER_LOOKUP # ippool(8) support
1.53 tsutsui 211: #options IPFILTER_DEFAULT_BLOCK # block all packets by default
212: options PPP_BSDCOMP # Add BSD compression to ppp device
213: options PPP_DEFLATE # Add deflate (libz) compression to ppp device
214: options PPP_FILTER # Add active filters for ppp (via bpf)
215: #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
216:
217: #options ALTQ # Manipulate network interfaces' output queues
218: #options ALTQ_BLUE # Stochastic Fair Blue
219: #options ALTQ_CBQ # Class-Based Queueing
220: #options ALTQ_CDNR # Diffserv Traffic Conditioner
221: #options ALTQ_FIFOQ # First-In First-Out Queue
222: #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
223: #options ALTQ_HFSC # Hierarchical Fair Service Curve
224: #options ALTQ_LOCALQ # Local queueing discipline
225: #options ALTQ_PRIQ # Priority Queueing
226: #options ALTQ_RED # Random Early Detection
227: #options ALTQ_RIO # RED with IN/OUT
228: #options ALTQ_WFQ # Weighted Fair Queueing
229:
230:
231: #### Main bus and CPU .. all systems.
232: mainbus0 at root
233: cpu0 at mainbus0
234:
235: #### Bus types found on SPARC systems.
236:
237: sbus* at mainbus0 # SBus-based systems
238: psycho* at mainbus0 # PCI-based systems
239: pci* at psycho?
240: pci* at ppb?
241: ppb* at pci? # `APB' support.
242: ebus* at pci? # ebus devices
243: # XXX 'puc's aren't really bridges, but there's no better place for them here
244: puc* at pci? dev ? function ? # PCI "universal" comm. cards
245:
246: #### Standard system devices -- all required for a given architecture
247:
248: ## PROM console driver -- if all else fails
249: pcons0 at mainbus0 # PROM console
250:
251: ## Auxiliary system registers -- We use the OBP for power management
252: auxio* at ebus? # auxio registers
253: auxio* at sbus? slot ? offset ? # auxio registers
254:
255: # We also need:
256: bpp* at sbus? slot ? offset ? # parallel port
257: lpt* at ebus? # parallel port
258:
1.74 tsutsui 259: ## Mostek clock found on sbus on Ultra-1,2 systems
260: ## and found on ebus on Ultra-5 and other systems.
1.53 tsutsui 261: clock* at sbus? slot ? offset ?
262: clock* at ebus?
1.74 tsutsui 263:
264: ## DS1287 compatible clock found on ebus on Netra X1 and other systems.
1.53 tsutsui 265: rtc* at ebus?
266:
267: ## Timer chip found on 4/300, sun4c, sun4m and (some) sun4u systems.
268: timer* at mainbus0 # sun4c
269:
270: #### Serial port configuration
271:
272: ## Zilog 8530 serial chips. Each has two-channels.
273: ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
274: zs* at sbus? slot ? offset ?
275: zstty* at zs? channel ? # ttya
276: kbd0 at zstty?
277: ms0 at zstty?
278:
279: ## PCI machines have serial ports:
280: ## Siemens SAB82532 controller: ttya and ttyb (`su'; sab)
281: ## Part of NS PC87332VLJ Super I/O controller: kbd/mouse (`se'; com)
282:
283: ## The SAB82532 controller has two serial ports
284: sab* at ebus? # ttya/ttyb
285: sabtty* at sab? channel ?
286:
287: ## Part of a PC87332VLJ
288: com* at ebus? # `com' driver for `su'
289: kbd0 at com? # keyboard
290: ms0 at com? # mouse
291:
292: ## Magma Serial/Parallel driver (not tested)
293: #magma* at sbus? slot ? offset ?
294: #mtty* at magma?
295: #mbpp* at magma?
296:
297: ## SUNW,spif Serial/Parallel driver (not tested)
298: #spif* at sbus? slot ? offset ?
299: #stty* at spif?
300: #sbpp* at spif?
301:
302: ## PCI serial interfaces
303: com* at puc? port ? # 16x50s on "universal" comm boards
304: cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
305: cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
306:
1.61 jnemeth 307: # PCI cryptographic devices
308: hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
309: ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x
310:
1.53 tsutsui 311:
312: #### Disk controllers and disks
313:
314: ## The following flags may be set for the NCR53c94 based esp driver:
315: ## bits 0-7: disable disconnect/reselect for the corresponding target
316: ## bits 8-15: disable synchronous negotiation for target [bit-8]
317: ## bits 16-23: disable tagged queuing for target [bit-16]
318:
319: ## sun4u on-board SCSI, and FSBE/S SBus SCSI cards, an NCR53c94 or
320: ## equivalent behind an LSI Logic DMA controller
321:
322: dma* at sbus? slot ? offset ? # SBus
323: esp* at dma? # SBus
324:
325: esp* at sbus? slot ? offset ?
326: isp* at sbus? slot ? offset ?
327: isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
328: siop* at pci? # 53C8xx ("glm" compatible)
329: esiop* at pci? # 53C875 and newer ("glm" compatible)
330:
331: # PCI SCSI controllers
332: # UT marks untested.
333: adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT
334: adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI UT
335: ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
336: bha* at pci? dev ? function ? # BusLogic 9xx SCSI UT
337: dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID UT
338: iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
339: njs* at pci? dev ? function ? # Workbit NinjaSCSI-32
340: pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
341: trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI
342:
343: scsibus* at scsi?
344:
345: ## These entries find devices on all SCSI busses and assign
346: ## unit numbers dynamically.
347: sd* at scsibus? target ? lun ? # SCSI disks
348: st* at scsibus? target ? lun ? # SCSI tapes
349: cd* at scsibus? target ? lun ? # SCSI CD-ROMs
350: ch* at scsibus? target ? lun ? # SCSI changer devices
351: ss* at scsibus? target ? lun ? # SCSI scanners
352: ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE devices
353: uk* at scsibus? target ? lun ? # unknown SCSI
354:
355: # IDE and related devices
356: # PCI IDE controllers - see pciide(4) for supported hardware.
357: # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
358: # how to set up DMA modes for this chip. This may work, or may cause
359: # a machine hang with some controllers.
360: pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
361: acardide* at pci? dev ? function ? # Acard IDE controllers
362: aceride* at pci? dev ? function ? # Acer Lab IDE controllers
363: artsata* at pci? dev ? function ? # Intel i31244 SATA controller
364: cmdide* at pci? dev ? function ? # CMD tech IDE controllers
365: cypide* at pci? dev ? function ? # Cypress IDE controllers
366: hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
367: optiide* at pci? dev ? function ? # Opti IDE controllers
368: pdcide* at pci? dev ? function ? # Promise IDE controllers
369: pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
370: satalink* at pci? dev ? function ? # SiI SATALink controllers
371: siside* at pci? dev ? function ? # SiS IDE controllers
372: slide* at pci? dev ? function ? # Symphony Labs IDE controllers
373: viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
374:
375: # ATA (IDE) bus support
376: atabus* at ata?
377: atapibus* at atapi?
378:
379: # IDE drives
380: # Flags are used only with controllers that support DMA operations
381: # and mode settings (e.g. some pciide controllers)
382: # The lowest order four bits (rightmost digit) of the flags define the PIO
383: # mode to use, the next set of four bits the DMA mode and the third set the
384: # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
385: # to use, and the last bit must be 1 for this setting to be used.
386: # For DMA and UDMA, 0xf (1111) means 'disable'.
387: # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
388: # (0xc=1100, 0xa=1010, 0xf=1111)
389: # 0x0000 means "use whatever the drive claims to support".
390:
391: ## Disable UDMA 4 which causes data corruption on the Acer Labs
392: ## chipset on Sun Blade 100 and Netra X1 machines.
393: wd* at atabus? drive ? flags 0x0000
394:
395: cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
396: sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
397: uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
398:
399: # RAID controllers and devices (untested)
400: cac* at pci? dev ? function ? # Compaq PCI array controllers
401: mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family
402: twe* at pci? dev ? function ? # 3ware Escalade RAID controllers
403:
404: ld* at cac? unit ? # logical disk devices
405: ld* at twe? unit ?
406: ld* at mlx? unit ?
407:
408: ## Floppy controller and drive found on SPARCstations.
409:
410: # need share with the sparc, and everyone else. needs to use auxio.
411: # actually, the ebus version has (will have) direct access to it's AUXIO
412: # register space (it is mapped in to fdthree not auxio).
1.70 jnemeth 413: fdc0 at sbus? slot ? offset ? # SUNW,fdtwo
414: #fdc0 at ebus? # fdthree, EXPERIMENTAL
415: fd* at fdc0 # the drive itself
1.53 tsutsui 416:
417: ## A disk-like interface to files. Can be used to create floppy, CD,
418: ## miniroot images, etc.
419:
420: pseudo-device vnd
421: #options VND_COMPRESSION # compressed vnd(4)
422:
423: ## Concatenated and striped disks; with this, you can create a software-based
424: ## disk array similar to a "RAID 0" setup. See ccd(4).
425:
426: pseudo-device ccd 4
427:
428: ## Cryptographic disk devices. See cgd(4).
429:
430: #pseudo-device cgd 4
431:
432: ## RAIDframe disk driver: software RAID driver. See raid(4).
433:
434: pseudo-device raid 8
435: options RAID_AUTOCONFIG # auto-configuration of RAID components
436: # Options to enable various other RAIDframe RAID types.
437: # options RF_INCLUDE_EVENODD=1
438: # options RF_INCLUDE_RAID5_RS=1
439: # options RF_INCLUDE_PARITYLOGGING=1
440: # options RF_INCLUDE_CHAINDECLUSTER=1
441: # options RF_INCLUDE_INTERDECLUSTER=1
442: # options RF_INCLUDE_PARITY_DECLUSTERING=1
443: # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
444:
445:
446: ## Memory disk device, used on boot floppies with compressed
447: ## kernel-plus-root-disk images.
448:
449: pseudo-device md 1
450:
451:
452: #### Network interfaces
453:
454: ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue
455: ## Three flavors of additional SBus ethernets are available. One attaches
456: ## directly like the sun4c on-board, one uses the ledma device like the
457: ## sun4m on-board, and one uses the lebuffer device.
458:
459: ledma0 at sbus? slot ? offset ? # sun4m on-board
460: le0 at ledma0 # sun4m on-board
461: le* at sbus? slot ? offset ? # SBus
462: ledma* at sbus? slot ? offset ? # SBus
463: le* at ledma? # SBus
464: lebuffer0 at sbus? slot ? offset ? # SBus
465: le0 at lebuffer? # SBus
466: lebuffer* at sbus? slot ? offset ? # SBus
467: le* at lebuffer? # SBus
468:
469: ## Happy Meal Ethernet
470: hme* at sbus? slot ? offset ?
471: hme* at pci? dev ? function ? # network "hme" compatible
472:
473: ## qec/be, qec/hme
474: qec* at sbus? slot ? offset ?
475: be* at qec?
476: qe* at qec?
477:
478: # PCI network interfaces
479: # UT marks untested.
480: an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11) UT
481: ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11 UT
482: en* at pci? dev ? function ? # ENI/Adaptec ATM UT
483: # XXX causes ICE
484: #ep* at pci? dev ? function ? # 3Com 3c59x
485: ex* at pci? dev ? function ? # 3Com 90x[B]
486: epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
487: esh* at pci? dev ? function ? # Essential HIPPI card UT
488: fpa* at pci? dev ? function ? # DEC DEFPA FDDI UT
489: fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
490: gem* at pci? dev ? function ? # Apple GMAC and Sun ERI gigabit enet
491: # XXX lacks bus_dmamap_sync()
492: #le* at pci? dev ? function ? # PCnet-PCI Ethernet
493: # XXX uses vtophys()
494: #lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
1.92 mrg 495: mskc* at pci? dev ? function ? # Marvell Yukon 2 Gigabit Ethernet
496: msk* at mskc? # Marvell Yukon 2 Gigabit Ethernet
1.53 tsutsui 497: ne* at pci? dev ? function ? # NE2000-compatible Ethernet UT
498: ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial UT
499: # XXX cause uncorrectable DMA error
500: #pcn* at pci? dev ? function ? # PCnet-PCI Ethernet
501: ral* at pci? dev ? function ? # ralink wifi UT
502: re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S
503: rtk* at pci? dev ? function ? # Realtek 8129/8139
1.92 mrg 504: skc* at pci? dev ? function ? # SysKonnect SK9821 Gigabit Ethernet
505: sk* at skc? # SysKonnect SK9821 Gigabit Ethernet
1.53 tsutsui 506: sip* at pci? dev ? function ? # SiS 900 Ethernet
507: ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet UT
508: tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
509: tlp* at pci? dev ? function ? # DECchip 21x4x and clones
1.78 tsutsui 510: vge* at pci? dev ? function ? # VIA VT612X Gigabit Ethernet
1.53 tsutsui 511: vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
512: wi* at pci? dev ? function ? # Lucent/Intersil WaveLAN/IEEE
513: wm* at pci? dev ? function ? # Intel 8254x gigabit
514:
515: # MII/PHY support
516: acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
1.97 jdc 517: bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
1.98 ! tron 518: brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
1.78 tsutsui 519: ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs
1.53 tsutsui 520: dmphy* at mii? phy ? # Davicom DM9101 PHYs
521: exphy* at mii? phy ? # 3Com internal PHYs
522: icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
1.72 bouyer 523: ikphy* at mii? phy ? # Intel 82563 PHYs
1.53 tsutsui 524: inphy* at mii? phy ? # Intel 82555 PHYs
525: iophy* at mii? phy ? # Intel 82553 PHYs
526: igphy* at mii? phy ? # Intel IGP01E1000
527: lxtphy* at mii? phy ? # Level One LXT-970 PHYs
528: makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
529: nsphy* at mii? phy ? # NS83840 PHYs
530: nsphyter* at mii? phy ? # NS83843 PHYs
531: qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
1.75 tsutsui 532: rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs
533: rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
1.53 tsutsui 534: sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
535: tlphy* at mii? phy ? # ThunderLAN PHYs
536: tqphy* at mii? phy ? # TDK Semiconductor PHYs
537: ukphy* at mii? phy ? # generic unknown PHYs
538:
539: # PCI USB controllers
540: ehci* at pci? dev ? function ? # Enhanced Host Controller
541: ohci* at pci? dev ? function ? # Open Host Controller
542: uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
543:
1.90 kiyohara 544: # PCMCIA USB controllers
545: #slhci* at pcmcia? function ? # ScanLogic SL811HS
546:
1.53 tsutsui 547: # USB bus support
548: usb* at ehci?
549: usb* at ohci?
550: usb* at uhci?
551: #usb* at slhci?
552:
553: # USB Hubs
554: uhub* at usb?
1.83 drochner 555: uhub* at uhub? port ?
1.53 tsutsui 556:
557: # USB HID device
558: uhidev* at uhub? port ? configuration ? interface ?
559:
560: # USB Mice
561: ums* at uhidev? reportid ?
562: wsmouse* at ums? mux 0
563:
564: # USB eGalax touch-panel
565: uep* at uhub? port ?
566: wsmouse* at uep? mux 0
567:
568: # USB Keyboards
569: ukbd* at uhidev? reportid ?
570: wskbd* at ukbd? console ? mux 1
571:
1.60 skrll 572: # USB serial adapter
1.53 tsutsui 573: ucycom* at uhidev? reportid ?
574:
575: # USB Generic HID devices
576: uhid* at uhidev? reportid ?
577:
578: # USB Printer
579: ulpt* at uhub? port ? configuration ? interface ?
580:
581: # USB Modem
582: umodem* at uhub? port ? configuration ?
583: ucom* at umodem?
584:
585: # USB Mass Storage
586: umass* at uhub? port ? configuration ? interface ?
587: wd* at umass?
588:
589: # USB audio
590: uaudio* at uhub? port ? configuration ?
591:
592: # USB MIDI
593: umidi* at uhub? port ? configuration ?
594:
595: # USB IrDA
596: # USB-IrDA bridge spec
597: uirda* at uhub? port ? configuration ? interface ?
598: irframe* at uirda?
599:
600: # SigmaTel STIr4200 USB/IrDA Bridge
601: ustir* at uhub? port ?
602: irframe* at ustir?
603:
604: # USB Ethernet adapters
605: aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
606: axe* at uhub? port ? # ASIX AX88172 based adapters
607: cdce* at uhub? port ? # CDC, Ethernet Networking Control Model
608: cue* at uhub? port ? # CATC USB-EL1201A based adapters
609: kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
610: udav* at uhub? port ? # Davicom DM9601 based adapters
611: url* at uhub? port ? # Realtek RTL8150L based adapters
612:
613: # USB 802.11 adapters
614: atu* at uhub? port ? # Atmel AT76C50XX based adapters
615: ral* at uhub? port ? # Ralink Technology RT25x0 802.11a/b/g
1.87 kiyohara 616: #zyd* at uhub? port ? # Zydas ZD1211
1.53 tsutsui 617:
618: # Prolific PL2301/PL2302 host-to-host adapter
619: upl* at uhub? port ?
620:
621: # Serial adapters
622: ubsa* at uhub? port ? # Belkin serial adapter
623: ucom* at ubsa? portno ?
624:
625: uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
626: ucom* at uftdi? portno ?
627:
628: umct* at uhub? port ? # MCT USB-RS232 serial adapter
629: ucom* at umct? portno ?
630:
631: uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
632: ucom* at uplcom? portno ?
633:
634: uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
635: ucom* at uvscom? portno ?
636:
637: # Diamond Multimedia Rio 500
638: urio* at uhub? port ?
639:
640: # USB Handspring Visor
641: uvisor* at uhub? port ?
642: ucom* at uvisor?
643:
644: # Kyocera AIR-EDGE PHONE
645: ukyopon* at uhub? port ?
646: ucom* at ukyopon? portno ?
647:
648: # USB scanners
649: uscanner* at uhub? port ?
650:
651: # USB scanners that use SCSI emulation, e.g., HP5300
652: usscanner* at uhub? port ?
653:
654: # Y@P firmware loader
655: uyap* at uhub? port ?
656:
657: # D-Link DSB-R100 USB radio
658: udsbr* at uhub? port ?
659: radio* at udsbr?
660:
661: # USB Generic driver
662: ugen* at uhub? port ?
663:
664: ## Loopback network interface; required
665: pseudo-device loop
666:
667: ## SLIP and CSLIP interfaces, for IP over a serial line.
668: pseudo-device sl
669:
670: ## PPP, the successor to SLIP. See pppd(8).
671: pseudo-device ppp
672:
673: ## PPP over Ethernet (RFC 2516)
674: pseudo-device pppoe
675:
676: ## Starmode Radio IP, a special hardware network device.
677: pseudo-device strip
678:
679: ## Network "tunnel" device, allowing protocol stacks to run in the userland.
680: ## This is used by the third-party user-mode "ppp" program, and others.
681: pseudo-device tun
682: pseudo-device tap # virtual Ethernet
683:
684: ## Generic L3 over IP tunnel
1.79 dyoung 685: pseudo-device gre # generic L3 over IP tunnel
1.53 tsutsui 686:
687: ## Berkeley Packet Filter, required to run RARPD. A generic C-language
688: ## interface that allows selective examining of incoming packets.
689: pseudo-device bpfilter
690:
691: # Common Address Redundancy Protocol
692: #pseudo-device carp
693:
694: ## IEEE 802.1q encapsulation
695: pseudo-device vlan
696:
697: ## Simple inter-network traffic bridging
698: pseudo-device bridge
699: #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
1.85 martin 700: pseudo-device agr # IEEE 802.3ad link aggregation
1.53 tsutsui 701:
702: ## IP Filter, used in firewall and NAT applications. See ipnat(8) for
703: ## one example of the use of the IP Filter.
704: pseudo-device ipfilter
705:
706: ## for IPv6
707: pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
708: #pseudo-device faith # IPv[46] tcp relay translation i/f
709: pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
710:
711:
712: #### CardBus and PCMCIA devices
713:
714: # PCI CardBus bridge support
715: #cbb* at pci? dev ? function ?
716: #cardslot* at cbb?
717:
718: # CardBus bus support
719: #cardbus* at cardslot?
720: #pcmcia* at cardslot?
721:
722: ## SBus to PCMCIA bridge
723: #nell* at sbus? slot ? offset ? # PCMCIA bridge
724: #pcmcia* at nell?
725:
726: ## CardBus cards; UT marks untested.
727:
728: # CardBus serial interfaces
729: #com* at cardbus? function ? # Modems and serial cards UT
730:
731: # CardBus SCSI controllers
732: #adv* at cardbus? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT
733: #ahc* at cardbus? function ? # Adaptec ADP-1480 UT
734: #njs* at cardbus? function ? # Workbit NinjaSCSI-32
735:
1.65 itohy 736: # CardBus IDE controllers
1.69 itohy 737: #njata* at cardbus? function ? flags 0x01 # Workbit NinjaATA-32
1.65 itohy 738:
1.53 tsutsui 739: # CardBus network interfaces
740: #ath* at cardbus? function ? # Atheros 5210/5211/5212 802.11
741: #atw* at cardbus? function ? # ADMtek ADM8211 (802.11) UT
742: #ex* at cardbus? function ? # 3Com 3C575TX
743: #fxp* at cardbus? function ? # Intel i8255x UT
744: #ral* at cardbus? function ? # Ralink Technology RT25x0 802.11a/b/g UT
745: #rtk* at cardbus? function ? # Realtek 8129/8139 UT
746: #tlp* at cardbus? function ? # DECchip 21143
747:
748: # CardBus USB controllers
749: #ehci* at cardbus? function ? # Enhanced Host Controller
750: #ohci* at cardbus? function ? # Open Host Controller
751:
752: ## PCMCIA cards; UT marks untested.
753:
754: # PCMCIA serial interfaces
755: #com* at pcmcia? function ? # Modems and serial cards
756:
757: #pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards UT
758: #com* at pcmcom? slave ? # ...and the slave devices
759:
760: # PCMCIA SCSI controllers
761: #aic* at pcmcia? function ? # Adaptec APA-1460 SCSI UT
762: #esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI UT
1.58 hubertf 763: #spc* at pcmcia? function ? # Fujitsu MB87030/MB89352 SCSI
1.53 tsutsui 764:
765: # PCMCIA IDE controllers
766: #wdc* at pcmcia? function ?
767:
768: # PCMCIA network interfaces
769: #an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11) UT
770: #awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS) UT
771: #cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer UT
772: #cs* at pcmcia? function ? # CS89xx Ethernet UT
773: #ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
774: #mbe* at pcmcia? function ? # MB8696x based Ethernet UT
775: #ne* at pcmcia? function ? # NE2000-compatible Ethernet
776: #ray* at pcmcia? function ? # Raytheon Raylink (802.11) UT
777: #sm* at pcmcia? function ? # Megahertz Ethernet UT
778: # tr at pcmcia has problems with Cardbus bridges
779: #tr* at pcmcia? function ? # TROPIC based Token-Ring UT
780: #wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
781: #xirc* at pcmcia? function ? # Xircom CreditCard Ethernet UT
782: #com* at xirc?
783: #xi* at xirc?
784: #mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
785: #com* at mhzc?
786: #sm* at mhzc?
787:
788: # PCMCIA audio devices
789: #esl* at pcmcia? function ? # ESS 1688 AudioDrive UT
790:
1.66 plunky 791: #### Bluetooth Controller and Device support
792:
793: ## Bluetooth PCMCIA Controllers
794: #bt3c* at pcmcia? function ? # 3Com 3CRWB6096-A
1.89 kiyohara 795: #btbc* at pcmcia? function ? # AnyCom BlueCard LSE041/039/139
1.66 plunky 796:
797: ## Bluetooth USB Controllers
1.83 drochner 798: ubt* at uhub? port ?
1.66 plunky 799:
800: ## Bluetooth Device Hub
1.95 kiyohara 801: #bthub* at bcsp?
1.66 plunky 802: #bthub* at bt3c?
1.89 kiyohara 803: #bthub* at btbc?
1.82 kiyohara 804: #bthub* at btuart?
1.66 plunky 805: bthub* at ubt?
806:
807: ## Bluetooth HID support
808: bthidev* at bthub?
809:
810: ## Bluetooth Mouse
811: btms* at bthidev? reportid ?
812: wsmouse* at btms? mux 0
813:
814: ## Bluetooth Keyboard
815: btkbd* at bthidev? reportid ?
816: wskbd* at btkbd? console ? mux 1
817:
818: ## Bluetooth Audio support
819: btsco* at bthub?
820:
1.53 tsutsui 821: #### Audio and video devices
822:
823: ## /dev/audio support (`audiocs' plus `audio')
824: ##
825: audiocs* at sbus? slot ? offset ? # SUNW,CS4231
826: audiocs* at ebus? # SUNW,CS4231 in U5/U10
827: autri* at pci? dev ? function ? # Blade 100 'sound'
828:
829: audio* at audiobus?
830:
1.54 nakayama 831: midi* at midibus?
1.53 tsutsui 832:
833:
834: ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
835: ## systems. If your sun4 system has a cgfour installed in the P4 slot,
836: ## the P4 entries for "bwtwo" will attach to the overlay plane of the
837: ## "cgfour".
838:
839: #bwtwo0 at sbus? slot ? offset ? # sun4c and sun4m
840: #bwtwo* at sbus? slot ? offset ?
841:
842: ## Sun "cgthree" Sbus color framebuffer
843: #cgthree0 at sbus? slot ? offset ?
844: #cgthree* at sbus? slot ? offset ?
845:
846: ## Sun "cgsix" accelerated color framebuffer.
847: cgsix* at sbus? slot ? offset ?
848:
849: ## Sun FFB
850: ffb* at mainbus0
851:
852: # On board vga on U5/U10 etc.
853: machfb* at pci?
854:
1.94 macallan 855: # generic PCI framebuffers
856: genfb* at pci?
857:
1.53 tsutsui 858: # make sure the console display is always wsdisplay0
859: wsdisplay0 at wsemuldisplaydev? console 1
860: wsdisplay* at wsemuldisplaydev?
861:
862: # wsmouse for sun ms
863: wsmouse* at ms0
864:
865: # wskbd for sun kbd
866: wskbd0 at kbd0
867:
868: # various options for wscons - we try to look as much like a standard
869: # sun console as possible
870: options WSEMUL_SUN # sun terminal emulation
871: options WS_DEFAULT_FG=WSCOL_BLACK
872: options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
873: options WSDISPLAY_COMPAT_USL # VT handling
874: options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
875: options WSDISPLAY_DEFAULTSCREENS=4
876: options FONT_GALLANT12x22 # PROM font look-alike
877:
878: #### Other device configuration
879:
1.55 gdamore 880: psm* at ebus? # Ultrabook IIi microcontroller
1.84 tnn 881: envctrl* at ebus? # Ultra E450 environmental monitoring
1.55 gdamore 882:
1.53 tsutsui 883: ### Other pseudo-devices
884:
885: pseudo-device crypto # /dev/crypto device
886: pseudo-device swcrypto # software crypto implementation
887:
888: ## Pseudo ttys, required for network logins and programs like screen.
889:
890: pseudo-device pty # pseudo-ttys (for network, etc.)
891:
892: ## Random device, used to implement /dev/random (a source of random noise),
893: ## and generate randomness for some kernel formulae.
894:
895: pseudo-device rnd
896:
897: pseudo-device wsmux # mouse & keyboard multiplexor
898: pseudo-device wsfont
899: pseudo-device clockctl # user control of clock subsystem
900: pseudo-device ksyms # /dev/ksyms
901: #pseudo-device pf # PF packet filter
902: #pseudo-device pflog # PF log if
903: pseudo-device fss 4 # file system snapshot device
1.95 kiyohara 904: #pseudo-device bcsp # BlueCore Serial Protocol
1.82 kiyohara 905: #pseudo-device btuart # Bluetooth HCI UART (H4)
1.53 tsutsui 906:
1.73 elad 907: options FILEASSOC # fileassoc(9) - required for Veriexec
1.56 elad 908:
1.53 tsutsui 909: # Veriexec
910: #
911: # a pseudo device needed for veriexec
1.73 elad 912: pseudo-device veriexec 1
1.53 tsutsui 913: #
914: # Uncomment the fingerprint methods below that are desired. Note that
915: # removing fingerprint methods will have almost no impact on the kernel
916: # code size.
917: #
1.73 elad 918: options VERIFIED_EXEC_FP_RMD160
919: options VERIFIED_EXEC_FP_SHA256
920: options VERIFIED_EXEC_FP_SHA384
921: options VERIFIED_EXEC_FP_SHA512
922: options VERIFIED_EXEC_FP_SHA1
923: options VERIFIED_EXEC_FP_MD5
1.53 tsutsui 924:
925: # a pseudo device needed for SMBFS
926: pseudo-device nsmb # experimental - SMB requester
1.67 elad 927:
1.80 elad 928: #options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
929: # (for static binaries only for now)
CVSweb <webmaster@jp.NetBSD.org>