CVS log for src/sys/arch/sparc/conf/INSTALL

Up to [cvs.NetBSD.org] / src / sys / arch / sparc / conf

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by jakllsch in ticket #45):

	sys/secmodel/suser/secmodel_suser.c: revision 1.56
	sys/sys/kauth.h: revision 1.88
	sys/arch/sparc/conf/INSTALL: revision 1.106
	share/examples/secmodel/secmodel_example.c: revision 1.29
	sys/conf/files: revision 1.1306

remove lingering strip(4) remnants

more strip(4) removal, this time in kauth(9)

remove lingering strip(4) remnants

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Sync with HEAD

Sync with HEAD

base INSTALL kernel upon GENERIC with many "no ...".

Merge changes from current as of 20200406

Sync with head.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver.  It is
long since obsolete.

Sync with HEAD

Sync with HEAD, resolve a few conflicts

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Ssync with HEAD

Sync with HEAD

Resolve a couple of conflicts (result of the uimin/uimax changes)

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

update from HEAD

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
  since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
  many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Sync with HEAD

Remove TCP_COMPAT_42 from the config files. Pass 3.

Sync with HEAD

Sync with HEAD

Bump the ram disk and miniroot size slightly for clang.

Sync with HEAD

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Sync with HEAD

- purge long obsolete RASTERCONSOLE
- add mgx

Sync with HEAD (as of 26th Dec)

Remove KMEMSTATS. Normally it's ok now.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

sync with head

fix manual section numbering of sysctl.
  thanks wiz@

sync with head

G/C PFIL_HOOKS from the kernel configs.

resync from head

the bogus number police

remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

resync with head

add sx at mainbus

sync with head

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
  and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

switch to WSEMUL_VT100 to reduce differences with sparc64 and other wscons
and fb console using ports
WSEMUL_SUN is left in but commented out so whoever wants it back can have it
with minimal effort

sync with head

sync to latest -current.

Remove stray comments for LKM.

merge to -current.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself.  Move it to std.  This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports.  Thanks to Havard Eidnes for
pointing them out.

Sync with HEAD.

sync with head

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

sync with head

Add QUOTA2 where QUOTA is enabled (and QUOTA2 commented out where QUOTA
is commented out)

Remove unused count from pseudo-device md.

Sync with HEAD.

sync with head.

make sure to include a small font for machines like the SPARCbook 3GX
should fix PR43297

sync with head

Sync with HEAD.

sync to netbsd-5

Remove unused count (invariably "4") from pseudo-device fss.

enable CG12 support

sync with head

enable PNOZZ_USE_LATCH in case we run into some hardware which needs it

Remove the portalfs kernel file system driver.  Replace mount_portal(8)
with a version based on puffs.  User functionality remains the same.

Back out ticket 968

Pull up following revision(s) (requested by macallan in ticket #968):
	sys/arch/sparc/conf/INSTALL: revision 1.64
convert to wscons, while there add some missing wsdisplay drivers

Remove commented out and nonexistent cgthree at obio stuff.

SPARCclassic has onboard CG3 but it's internally connected via SBus,
and there is no info about sun4m machines which actually require
cgthree at obio attachment. Info from jdc@.

sync with head.

enable the tcx driver

sync with head

Add -lprop to the ramdisk build, so that it builds again, due to
recent changes in newfs.  Bump the ramdisk size from 1536 to 1800
blocks as a consequence.

sync with head

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

enable ZX/Leo since we now support wscons on it

sync with head.

Sync with HEAD.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

Sync with HEAD.

Cosmetic clean up:
  options<space><tab>

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Sync with HEAD.

Sync with HEAD.

convert to wscons, while there add some missing wsdisplay drivers

Update haad-dm branch to haad-dm-base2.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

Sync with HEAD.

Sync with HEAD.

Sync with wrstuden-revivesa-base-2.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

Sync with HEAD.

Sync with head.

Increase RAMDISK size due to ever-increasing bloat.

sync with HEAD

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree.  Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches.  The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

sync with head.

Sync with head.

Sync with HEAD.

Sync with head.

Add COMPAT_40.  While here, make COMPAT_30 comment match other COMPAT_*.

Sync with head.

sync with head.

update comments on NFS_V2_ONLY after nqnfs removal.  no functional changes.
from Arnaud Lacombe.

Sync with head.

sync with head

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

sync with head

sync with head.

PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

sync with head.

Sync with head.

sync with head.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

Sync with head.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Sync with HEAD. Here we go again...

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Sync with HEAD.

sync with head.

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Sync with HEAD.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
  have a disk.  Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sync with HEAD.

Add COMPAT_BSDPTY to the rest of the config files.

Fix the sync with head I botched.

Sync with HEAD.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Sync with HEAD

Pull up revision 1.42 (requested by atatat in ticket #663):
	Add "options SYSCTL_INCLUDE_DESCR" to a lot of configurations,
	but commented out in most of them.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add COMPAT_16.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more.  see tech-security

Bye Bye UCONSOLE

crank memory disk from 1360 blocks to 1376 blocks

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

enable USERCONF by default; it's small and extremely useful to have available.

sync kqueue branch with HEAD

Catch up to -current.

catch up with -current.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

catch up with -current on kqueue branch

Catch up to -current.

- Enable NFS_BOOT_DHCP (as well as the existing NFS_BOOT_BOOTPARAM).
  DHCP/Bootp is tried before bootparams in the MI nfs mountroot code.
- Change the order in boot.net from "bootparams then bootp" to
  "bootp then bootparams", to be consistent with the MI nfs mountroot code.

(Consistency with other NetBSD ports is good, and things still work
for sites that run bootparams but not dhcp/bootp, although I'd argue that
dhcp/bootp is much easier to setup and manage and is easier to debug
than our rpc.bootparamd...)

Per discussion with Paul Kranenburg and Matt Green.

Add the INCLUDE_CONFIG_FILE option to all config files.  In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Catch up to -current.

Add commented-out USERCONF option.  Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Catch up with -current.

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
  are now consistently named
* fold opt_mdsize.h into opt_md.h

Catch up to -current.

Sync w/ -current.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Sync kqueue branch with -current.

Catch up to -current.

cleanup:
	options SPACE TAB
	makeoptions TAB
	psuedo-device TAB
	remove trailing whitespace
	replace multiple spaces -> tabs
	options "FOO" -> options FOO
	options "FOO=bar" -> options FOO=bar
	options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
	KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
	DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for  options KGDB_DEVNAME="\"com\""
- use correct quotes for  options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

file INSTALL was added on branch nathanw_sa on 2002-01-08 00:27:33 +0000

Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Sync with HEAD.

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

Update comment accompanying the SUN4_MMU3L option.

Pullup 1.24 [pk]:
Enable sun4 support and VME devices.

Enable sun4 support and VME devices.

Adjust md root filesystem size.
Enable MFS.

Commit by patch [pk]:
- boot floppy image out of space: use a two disk system
- update INSTALL kernel
- updates/fixes to miniroot image
- support for building CD image
- update installation doc

Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device  pty             2       # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Switch INSTALL back to being used by miniroot install.
Add INSTALL-SYSINST config for sysinst install.
These are expected to diverge more as time progresses.

fix sysinst floppy for NetBSD/sparc, plus small doc fix.
Approved by thorpej, pullup list:
	distrib/notes/sparc/install			1.24
	distrib/sparc/bootfs.sysinst/Makefile		1.5
	distrib/sparc/list2sh.awk			1.4
	distrib/sparc/ramdisk.sysinst/Makefile		1.8
	distrib/sparc/ramdisk.sysinst/disktab		1.2
	distrib/sparc/ramdisk.sysinst/disktab.preinstall delete
	distrib/sparc/ramdisk.sysinst/dot.profile.m4	1.5
	distrib/sparc/ramdisk.sysinst/list.m4		1.6
	distrib/sparc/ramdisk.sysinst/mtree.conf	1.2
	distrib/sparc/ramdisk.sysinst/ramdiskbin.m4	1.4
	distrib/utils/libhack/Makefile.inc		1.10
	sys/arch/sparc/conf/INSTALL			1.17

Diet a little to help fitting onto a floppy

remove COMPAT_AOUT option.

Drop KERNFS

Sync w/ netbsd-1-5-base.

Apply patch (requested by he):
  Use 3240 and not 3528 as miniroot size.

Make the ramdisk space the same as the ramdisk size being built in distrib

Add (sometimes commented out) MIIVERBOSE option.

Apply patch (requested by toddpw):
  Fix build errors in distrib/sparc, support ``release'' target,
  increase size of ramdisk while removing dependency on /etc/disktab,
  and notifying kernel.

Expand md filesystem to 3.6MB.

bring in latest KAME (as of 19991130, KAME/NetBSD141) into kame branch
just for reference purposes.
This commit includes 1.4 -> 1.4.1 sync for kame branch.

The branch does not compile at all (due to the lack of ALTQ and some other
source code).  Please do not try to modify the branch, this is just for
referenre purposes.

synchronization to latest KAME will take place on HEAD branch soon.

Update from trunk.

It's time to be COMPAT_14.

update comments for mi VME

Sync w/ -current.

pullup 1.8->1.9 (mrg): add the xbox, be and ppp drivers

enable xbox and ppp

Sync w/ -current.

update this to GENERIC rev. 1.84.

SPARC console is black on white, and is centered by default.

Update configuration to match `rasops' fixes and config glue.

Bring sparc/sparc64 fb code and kernel configuration into line with
rcons changes.

bump size of miniroot

enable kernfs and mfs.

remove options FIFO; it's now the default

rename FLOPPY INSTALL, as it is used for cdroms also