Up to [cvs.NetBSD.org] / src / sys / arch / mips / adm5120 / dev
Request diff between arbitrary revisions
Default branch: MAIN
Revision 1.32 / (download) - annotate - [select for diffs], Sun Oct 23 06:29:01 2022 UTC (17 months, 3 weeks ago) by skrll
Branch: MAIN
CVS Tags: thorpej-ifq-base,
thorpej-ifq,
thorpej-altq-separation-base,
thorpej-altq-separation,
netbsd-10-base,
netbsd-10-0-RELEASE,
netbsd-10-0-RC6,
netbsd-10-0-RC5,
netbsd-10-0-RC4,
netbsd-10-0-RC3,
netbsd-10-0-RC2,
netbsd-10-0-RC1,
netbsd-10,
HEAD
Changes since 1.31: +6 -6
lines
Diff to previous 1.31 (colored) to selected 1.7.6.1 (colored)
Fix build from previous
Revision 1.31 / (download) - annotate - [select for diffs], Wed Mar 9 22:17:41 2022 UTC (2 years, 1 month ago) by riastradh
Branch: MAIN
CVS Tags: bouyer-sunxi-drm-base,
bouyer-sunxi-drm
Changes since 1.30: +2 -4
lines
Diff to previous 1.30 (colored) to selected 1.7.6.1 (colored)
usb: Provisionally release bus lock around ubm_rhctrl. This isn't quite correct, but it avoids a deadlock: - *_roothub_ctrl holds bus lock, waits in usb_delay_ms for kpause - softint waits for bus lock, holds up kpause wakeup The deadlock is new since recent changes to hold the bus lock over upm_start/upm_transfer. Making this change regresses to other problems: - *_suspend/resume and *_roothub_ctrl often touch the same portsc registers - roothub_ctrl_abort needs to wait for ubm_rhctrl to complete. When the bus lock was held across both, a noop served here, but we can't hold the bus lock across both, so that doesn't work. However, these problems -- which we've had for a long time -- seem to be less bad than the deadlock. So let's avoid the deadlock for now and then work out another way to serialize suspend/resume/rhctrl and aborts. Candidate fix for PR kern/56739.
Revision 1.30 / (download) - annotate - [select for diffs], Thu Mar 3 06:12:11 2022 UTC (2 years, 1 month ago) by riastradh
Branch: MAIN
Changes since 1.29: +12 -8
lines
Diff to previous 1.29 (colored) to selected 1.7.6.1 (colored)
usb: Hold pipe lock across upm_transfer and upm_start. This simplifies the code and fixes races with abort. Access to the pipe's queue is now done exclusively while the pipe is locked.
Revision 1.29 / (download) - annotate - [select for diffs], Thu Mar 3 06:04:31 2022 UTC (2 years, 1 month ago) by riastradh
Branch: MAIN
Changes since 1.28: +3 -39
lines
Diff to previous 1.28 (colored) to selected 1.7.6.1 (colored)
usb: Factor usb_insert_transfer out of upm_transfer and make private. Almost every upm_transfer function starts with: mutex_enter(&sc->sc_lock); err = usb_insert_transfer(xfer); mutex_exit(&sc->sc_lock); if (err) return err; Some of them have debug messages sprinkled in here too, or assert that err == USBD_NORMAL_COMPLETION (alternative is USBD_IN_PROGRESS, only for pipes with up_running or up_serialise, presumably not applicable for these types of pipes). Some of them also assert xfer->ux_status == USBD_NOT_STARTED, which is guaranteed on entry and preserved by usb_insert_transer. Exceptions: - arch/mips/adm5120/dev/ahci.c ahci_device_isoc_transfer just returns USBD_NORMAL_COMPLETION, but I'm pretty sure this is and always has been broken anyway, so won't make anything worse (if anything, might make it better...) - external/bsd/dwc2/dwc2.c dwc2_device_bulk_transfer and dwc2_device_isoc_transfer _also_ issue dwc2_device_start(xfer) under the lock. This is probably a better way to do it, but let's do it uniformly across all HCIs at once. - rump/dev/lib/libugenhc/ugenhc.c rumpusb_device_bulk_transfer sometimes returns USBD_IN_PROGRESS _without_ queueing the transfer, in the !rump_threads case. Not really sure how this is supposed to work... If it actually breaks anything, we can figure it out.
Revision 1.28 / (download) - annotate - [select for diffs], Tue Dec 21 09:51:22 2021 UTC (2 years, 3 months ago) by skrll
Branch: MAIN
Changes since 1.27: +4 -4
lines
Diff to previous 1.27 (colored) to selected 1.7.6.1 (colored)
Change the usb_mem API to take a bus_dma_tag_t in usb_allocmem instead of a struct usbd_bus *. This allows an HCD to use more than one tag.
Revision 1.27 / (download) - annotate - [select for diffs], Tue Dec 7 06:49:15 2021 UTC (2 years, 4 months ago) by skrll
Branch: MAIN
Changes since 1.26: +3 -3
lines
Diff to previous 1.26 (colored) to selected 1.7.6.1 (colored)
Make this compile again.
Revision 1.26 / (download) - annotate - [select for diffs], Mon Oct 4 21:02:40 2021 UTC (2 years, 6 months ago) by andvar
Branch: MAIN
Changes since 1.25: +3 -3
lines
Diff to previous 1.25 (colored) to selected 1.7.6.1 (colored)
remove duplicate the article in comments.
Revision 1.25 / (download) - annotate - [select for diffs], Sat Aug 7 16:18:58 2021 UTC (2 years, 8 months ago) by thorpej
Branch: MAIN
CVS Tags: thorpej-i2c-spi-conf2-base,
thorpej-i2c-spi-conf2
Changes since 1.24: +3 -3
lines
Diff to previous 1.24 (colored) to selected 1.7.6.1 (colored)
Merge thorpej-cfargs2.
Revision 1.24.8.1 / (download) - annotate - [select for diffs], Wed Aug 4 02:44:15 2021 UTC (2 years, 8 months ago) by thorpej
Branch: thorpej-cfargs2
Changes since 1.24: +3 -3
lines
Diff to previous 1.24 (colored) next main 1.25 (colored) to selected 1.7.6.1 (colored)
Adapt to CFARGS().
Revision 1.24 / (download) - annotate - [select for diffs], Sat Apr 24 23:36:41 2021 UTC (2 years, 11 months ago) by thorpej
Branch: MAIN
CVS Tags: thorpej-i2c-spi-conf-base,
thorpej-i2c-spi-conf,
thorpej-futex2-base,
thorpej-futex2,
thorpej-cfargs2-base,
cjep_sun2x-base1,
cjep_sun2x-base,
cjep_sun2x,
cjep_staticlib_x-base1,
cjep_staticlib_x-base,
cjep_staticlib_x
Branch point for: thorpej-cfargs2
Changes since 1.23: +3 -3
lines
Diff to previous 1.23 (colored) to selected 1.7.6.1 (colored)
Merge thorpej-cfargs branch: Simplify and make extensible the config_search() / config_found() / config_attach() interfaces: rather than having different variants for which arguments you want pass along, just have a single call that takes a variadic list of tag-value arguments. Adjust all call sites: - Simplify wherever possible; don't pass along arguments that aren't actually needed. - Don't be explicit about what interface attribute is attaching if the device only has one. (More simplification.) - Add a config_probe() function to be used in indirect configuiration situations, making is visibly easier to see when indirect config is in play, and allowing for future change in semantics. (As of now, this is just a wrapper around config_match(), but that is an implementation detail.) Remove unnecessary or redundant interface attributes where they're not needed. There are currently 5 "cfargs" defined: - CFARG_SUBMATCH (submatch function for direct config) - CFARG_SEARCH (search function for indirect config) - CFARG_IATTR (interface attribte) - CFARG_LOCATORS (locators array) - CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles) ...and a sentinel value CFARG_EOL. Add some extra sanity checking to ensure that interface attributes aren't ambiguous. Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark ports to associate those device handles with device_t instance. This will trickle trough to more places over time (need back-end for pre-OFW Sun OBP; any others?).
Revision 1.22.4.1 / (download) - annotate - [select for diffs], Sat Apr 3 22:28:30 2021 UTC (3 years ago) by thorpej
Branch: thorpej-futex
Changes since 1.22: +10 -9
lines
Diff to previous 1.22 (colored) next main 1.23 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD.
Revision 1.23.2.1 / (download) - annotate - [select for diffs], Sun Mar 21 21:09:03 2021 UTC (3 years ago) by thorpej
Branch: thorpej-cfargs
Changes since 1.23: +3 -3
lines
Diff to previous 1.23 (colored) next main 1.24 (colored) to selected 1.7.6.1 (colored)
Give config_found() the same variadic arguments treatment as config_search(). This commit only adds the CFARG_EOL sentinel to the existing config_found() calls. Conversion of config_found_sm_loc() and config_found_ia() call sites will be in subsequent commits.
Revision 1.23 / (download) - annotate - [select for diffs], Tue Jan 5 16:30:37 2021 UTC (3 years, 3 months ago) by skrll
Branch: MAIN
CVS Tags: thorpej-futex-base,
thorpej-cfargs-base
Branch point for: thorpej-cfargs
Changes since 1.22: +10 -9
lines
Diff to previous 1.22 (colored) to selected 1.7.6.1 (colored)
Misc KNF. NFCI.
Revision 1.15.2.2 / (download) - annotate - [select for diffs], Wed Apr 8 14:07:44 2020 UTC (4 years ago) by martin
Branch: phil-wifi
Changes since 1.15.2.1: +115 -23
lines
Diff to previous 1.15.2.1 (colored) to branchpoint 1.15 (colored) next main 1.16 (colored) to selected 1.7.6.1 (colored)
Merge changes from current as of 20200406
Revision 1.22 / (download) - annotate - [select for diffs], Sun Apr 5 20:59:38 2020 UTC (4 years ago) by skrll
Branch: MAIN
CVS Tags: phil-wifi-20200421,
phil-wifi-20200411,
phil-wifi-20200406,
bouyer-xenpvh-base2,
bouyer-xenpvh-base1,
bouyer-xenpvh-base,
bouyer-xenpvh
Branch point for: thorpej-futex
Changes since 1.21: +11 -3
lines
Diff to previous 1.21 (colored) to selected 1.7.6.1 (colored)
Switch USB to use non-coherent buffers for data transfers in the same way as OpenBSD. The use of coherent (uncacheable on ARM and other arches) mappings for transfer buffers impacts performance, espcially where memcpys are involved. Audit the necessary usb_syncmem operations - a few were missing.
Revision 1.17.4.2 / (download) - annotate - [select for diffs], Sun Mar 1 12:35:16 2020 UTC (4 years, 1 month ago) by martin
Branch: netbsd-9
CVS Tags: netbsd-9-3-RELEASE,
netbsd-9-2-RELEASE,
netbsd-9-1-RELEASE
Changes since 1.17.4.1: +103 -22
lines
Diff to previous 1.17.4.1 (colored) to branchpoint 1.17 (colored) next main 1.18 (colored) to selected 1.7.6.1 (colored)
Pull up following revision(s) (requested by riastradh in ticket #744): sys/dev/usb/uhci.c: revision 1.292 sys/dev/usb/uhci.c: revision 1.293 sys/dev/usb/usbdi.h: revision 1.99 sys/dev/usb/motg.c: revision 1.26 sys/dev/usb/motg.c: revision 1.27 sys/dev/usb/motg.c: revision 1.28 sys/dev/usb/motg.c: revision 1.29 sys/external/bsd/dwc2/dwc2.c: revision 1.70 sys/external/bsd/dwc2/dwc2.c: revision 1.71 sys/dev/usb/usb.c: revision 1.181 sys/arch/mips/adm5120/dev/ahci.c: revision 1.20 sys/dev/usb/usb.c: revision 1.182 sys/dev/usb/xhci.c: revision 1.116 sys/dev/usb/xhci.c: revision 1.117 sys/dev/usb/xhci.c: revision 1.118 sys/dev/usb/uhci.c: revision 1.289 sys/dev/usb/usbdivar.h: revision 1.121 sys/dev/usb/usbdi.c: revision 1.190 sys/dev/usb/usbdivar.h: revision 1.122 sys/dev/usb/usbdi.c: revision 1.191 sys/dev/usb/usbdi.c: revision 1.192 sys/external/bsd/dwc2/dwc2var.h: revision 1.7 sys/dev/usb/motg.c: revision 1.30 sys/dev/usb/motg.c: revision 1.31 sys/dev/usb/motg.c: revision 1.32 sys/dev/usb/motg.c: revision 1.33 sys/external/bsd/dwc2/dwc2.c: revision 1.67 sys/external/bsd/dwc2/dwc2.c: revision 1.68 sys/dev/usb/ehci.c: revision 1.270 sys/external/bsd/dwc2/dwc2.c: revision 1.69 sys/dev/usb/usbdi.h: revision 1.100 sys/dev/usb/ehci.c: revision 1.271 sys/arch/mips/adm5120/dev/ahci.c: revision 1.18 sys/dev/usb/usbdi.h: revision 1.101 sys/dev/usb/ehci.c: revision 1.272 sys/dev/ic/sl811hs.c: revision 1.103 sys/arch/mips/adm5120/dev/ahci.c: revision 1.19 sys/dev/usb/ehci.c: revision 1.273 sys/dev/usb/ohci.c: revision 1.293 sys/dev/usb/uhci.c: revision 1.290 sys/dev/usb/ohci.c: revision 1.294 sys/dev/usb/uhci.c: revision 1.291 sys/dev/usb/ohci.c: revision 1.295 Teach usb_rem_task to return whether removed from queue or not. New function usb_task_pending for diagnostic assertions. Usable only for negative diagnostic assertions: KASSERT(!usb_task_pending(dev, task)) If you can think of a better name for this than !usb_task_pending, I'm all ears. - Nothing guarantees xfer's timeout has completed. Wait for it when we free the xfer. - New xfer state variables ux_timeout_set and ux_timeout_reset. These are needed because: - The host controller interrupt cannot wait for the callout or task to finish running. - Nothing in the USBD API as is waits for the callout or task to finish running. - Callers expect to be able to resubmit USB xfers from xfer callbacks without waiting for anything to finish running. The variable ux_timeout_set can be used by a host controller to decide on submission whether to schedule the callout or to ask an already-scheduled callout or already-queued task to reschedule the callout, by setting the variable ux_timeout_reset to true. When the callout or task runs and sees that ux_timeout_reset is true, rather than queue the task or abort the xfer, it can instead just schedule the callout anew. - Fix steady state of timeouts in ehci. This is complicated because: 1. There are three ways that an xfer can be completed: (a) hardware interrupt completes xfer (b) software decision aborts xfer with USBD_CANCELLED (c) timeout aborts xfer with USBD_TIMEOUT 2. The timeout abort can't be done in callout because ehci_sync_hc, called unconditionally by ehci_abort_xfer to wait until the device has finished using any references to the xfer, may sleep. So we have to schedule a callout that, when run, will schedule a usb_task. 3. The hardware completion interrupt can't sleep waiting for a callout or task to finish -- can't use callout_halt or usb_rem_task_wait. So the callout and usb_task must be able to run _after_ the hardware completion interrupt, and recognize that they're late to the party. (Note, though, that usbd_free_xfer does wait for the callout and task to complete, so there's no danger they may use themselves after free.) 4. The xfer may resubmitted -- and the timeout may be rescheduled -- immediately after the hardware completion interrupt, _while_ the callout and/or usb_task may still be scheduled. Specifically, we may have the following sequence of events: (a) hardware completion interrupt (b) callout or usb_task fires (c) driver resubmits xfer (d) callout or usb_task acquires lock and looks around dazed and bewildered at the firehose of events like reading the news in 2019 The mechanism for sorting this out is that we have two bits of state: - xfer->ux_timeout_set informs the driver, when submitting an xfer and setting up its timeout, whether either the callout or usb_task is already scheduled or not. - xfer->ux_timeout_reset informs the callout or usb_task whether it should reschedule the callout, because the xfer got resubmitted, or not. - Factor out HCI-independent xfer completion logic. New API for HCI drivers to synchronize hardware completion interrupts, synchronous aborts, and asynchronous timeouts: - When submitting an xfer to hardware, call usbd_xfer_schedule_timeout(xfer). - On HCI completion interrupt for xfer completion: if (!usbd_xfer_trycomplete(xfer)) return; /* timed out or aborted, ignore it */ - In upm_abort methods, call usbd_xfer_abort(xfer). For HCI drivers that use this API (not needed in drivers that don't, or for xfers like root intr xfers that don't use it): - New ubm_abortx method serves role of former *hci_abort_xfer, but without any logic for wrangling timeouts/callouts/tasks -- caller in usbd_xfer_abort has already handled them. - New ubm_dying method, returns true if the device is in the process of detaching, used by the timeout logic. Converted and tested: - ehci - ohci Converted and compile-tested: - ahci (XXX did this ever work?) - dwc2 - motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?) - uhci - xhci Not changed: - slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer callout for timeouts (XXX but maybe should?) - ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its own transfer timeouts - Fix steady state of root intr xfers. Why? - Avoid completing a root intr xfer multiple times in races. - Avoid potential use-after-free in poll_hub callouts (uhci, ahci). How? - Use sc->sc_intr_xfer or equivalent to store only a pending xfer that has not yet completed -- whether successfully, by timeout, or by synchronous abort. When any of those happens, set it to null under the lock, so the xfer is completed only once. - For hci drivers that use a callout to poll the root hub (uhci, ahci): . Pass the softc pointer, not the xfer, to the callout, so the callout is not even tempted to use xfer after free -- if the callout fires, but the xfer is synchronously aborted before the callout can do anything, the xfer might be freed by the time the callout starts to examine it. . Teach the callout to do nothing if it is callout_pending after it has fired. This way: 1. completion or synchronous abort can just callout_stop 2. start can just callout_schedule If the callout had already fired before (1), and doesn't acquire the bus lock until after (2), it may be tempted to abort the new root intr xfer just after submission, which would be wrong -- so instead we just have the callout do nothing if it notices it has been rescheduled, since it will fire again after the appropriate time has elapsed. - Initialize xfer->ux_status in uhci_root_intr_start. Otherwise, it will be USBD_NOT_STARTED, so usbd_ar_pipe will skip calling upm_abort. Candidate fix for PR kern/54963, same problem as reported at: href="https://mail-index.NetBSD.org/current-users/2020/02/13/msg037740.html - Set ux_isdone in uhci_poll_hub for DIAGNOSTIC. - Fix mistakes in previous sloppy change with root intr xfers. - Make sure ux_status is set to USBD_IN_PROGRESS when started. Otherwise, if it is still in flight when we abort the pipe, usbd_ar_pipe will skip calling upm_abort. - Initialize ux_status under the lock; in principle a completion interrupt (or a delay) could race with the initialization. - KASSERT that the xfer is in progress when we're about to complete it. Candidate fix for PR kern/54963 for other HCI drivers than uhci. ok nick ok phone (This is the change that nick evidently MEANT to ok when he ok'd the previous one!) - Fix build - Fix non-DIAGNOSTIC builds. - Fix wrong KASSERT in motg abort. This has been wrong since last summer when we did the transition to xfer->ux_status = USBD_CANCELLED earlier. XXX pullup-9 - Fix mistakes in timeout/abort/completion changes in motg(4). - Call usbd_xfer_schedule_timeout so we actually do time out. - Don't call usbd_xfer_trycomplete until all the data have been transferred -- it commits to completion, not timeout. - Use xfer->ux_status != USBD_IN_PROGRESS to test whether, after a partial write, an xfer has been interrupted or timed out and need not be continued. - Remove wrong assertion. - Fix mistake in use of usbd_xfer_schedule_timeout in motg. This code path is used both for xfers that are new, and xfers that are being done piece by piece and are partway done. For the latter case, skip usbd_xfer_schedule_timeout so we schedule it only once per xfer. - Simplify some branches and kassert some redundant assignments.
Revision 1.17.6.1 / (download) - annotate - [select for diffs], Sat Feb 29 20:18:27 2020 UTC (4 years, 1 month ago) by ad
Branch: ad-namecache
Changes since 1.17: +106 -22
lines
Diff to previous 1.17 (colored) next main 1.18 (colored) to selected 1.7.6.1 (colored)
Sync with head.
Revision 1.14.2.1 / (download) - annotate - [select for diffs], Tue Feb 25 18:52:44 2020 UTC (4 years, 1 month ago) by martin
Branch: netbsd-8
CVS Tags: netbsd-8-2-RELEASE
Changes since 1.14: +5 -2
lines
Diff to previous 1.14 (colored) next main 1.15 (colored) to selected 1.7.6.1 (colored)
Pull up following revision(s) (requested by skrll in ticket #1507): sys/dev/usb/ohci.c: revision 1.296 sys/dev/usb/uhci.c: revision 1.294 sys/external/bsd/dwc2/dwc2.c: revision 1.72 sys/arch/mips/adm5120/dev/ahci.c: revision 1.21 sys/dev/usb/ehci.c: revision 1.274 Fix a memory leak. Spotted by nat@
Revision 1.17.4.1 / (download) - annotate - [select for diffs], Tue Feb 25 18:50:29 2020 UTC (4 years, 1 month ago) by martin
Branch: netbsd-9
Changes since 1.17: +5 -2
lines
Diff to previous 1.17 (colored) to selected 1.7.6.1 (colored)
Pull up following revision(s) (requested by skrll in ticket #718): sys/dev/usb/ohci.c: revision 1.296 sys/dev/usb/uhci.c: revision 1.294 sys/external/bsd/dwc2/dwc2.c: revision 1.72 sys/arch/mips/adm5120/dev/ahci.c: revision 1.21 sys/dev/usb/ehci.c: revision 1.274 Fix a memory leak. Spotted by nat@
Revision 1.21 / (download) - annotate - [select for diffs], Fri Feb 21 12:41:29 2020 UTC (4 years, 1 month ago) by skrll
Branch: MAIN
CVS Tags: is-mlppp-base,
is-mlppp,
ad-namecache-base3
Changes since 1.20: +5 -2
lines
Diff to previous 1.20 (colored) to selected 1.7.6.1 (colored)
Fix a memory leak. Spotted by nat@
Revision 1.20 / (download) - annotate - [select for diffs], Sat Feb 15 01:21:56 2020 UTC (4 years, 2 months ago) by riastradh
Branch: MAIN
Changes since 1.19: +7 -3
lines
Diff to previous 1.19 (colored) to selected 1.7.6.1 (colored)
Fix mistakes in previous sloppy change with root intr xfers. - Make sure ux_status is set to USBD_IN_PROGRESS when started. Otherwise, if it is still in flight when we abort the pipe, usbd_ar_pipe will skip calling upm_abort. - Initialize ux_status under the lock; in principle a completion interrupt (or a delay) could race with the initialization. - KASSERT that the xfer is in progress when we're about to complete it. Candidate fix for PR kern/54963 for other HCI drivers than uhci. ok nick ok phone (This is the change that nick evidently MEANT to ok when he ok'd the previous one!)
Revision 1.19 / (download) - annotate - [select for diffs], Wed Feb 12 16:02:01 2020 UTC (4 years, 2 months ago) by riastradh
Branch: MAIN
Changes since 1.18: +86 -14
lines
Diff to previous 1.18 (colored) to selected 1.7.6.1 (colored)
Fix steady state of root intr xfers. Why? - Avoid completing a root intr xfer multiple times in races. - Avoid potential use-after-free in poll_hub callouts (uhci, ahci). How? - Use sc->sc_intr_xfer or equivalent to store only a pending xfer that has not yet completed -- whether successfully, by timeout, or by synchronous abort. When any of those happens, set it to null under the lock, so the xfer is completed only once. - For hci drivers that use a callout to poll the root hub (uhci, ahci): . Pass the softc pointer, not the xfer, to the callout, so the callout is not even tempted to use xfer after free -- if the callout fires, but the xfer is synchronously aborted before the callout can do anything, the xfer might be freed by the time the callout starts to examine it. . Teach the callout to do nothing if it is callout_pending after it has fired. This way: 1. completion or synchronous abort can just callout_stop 2. start can just callout_schedule If the callout had already fired before (1), and doesn't acquire the bus lock until after (2), it may be tempted to abort the new root intr xfer just after submission, which would be wrong -- so instead we just have the callout do nothing if it notices it has been rescheduled, since it will fire again after the appropriate time has elapsed.
Revision 1.18 / (download) - annotate - [select for diffs], Wed Feb 12 16:01:00 2020 UTC (4 years, 2 months ago) by riastradh
Branch: MAIN
Changes since 1.17: +15 -10
lines
Diff to previous 1.17 (colored) to selected 1.7.6.1 (colored)
Factor out HCI-independent xfer completion logic. New API for HCI drivers to synchronize hardware completion interrupts, synchronous aborts, and asynchronous timeouts: - When submitting an xfer to hardware, call usbd_xfer_schedule_timeout(xfer). - On HCI completion interrupt for xfer completion: if (!usbd_xfer_trycomplete(xfer)) return; /* timed out or aborted, ignore it */ - In upm_abort methods, call usbd_xfer_abort(xfer). For HCI drivers that use this API (not needed in drivers that don't, or for xfers like root intr xfers that don't use it): - New ubm_abortx method serves role of former *hci_abort_xfer, but without any logic for wrangling timeouts/callouts/tasks -- caller in usbd_xfer_abort has already handled them. - New ubm_dying method, returns true if the device is in the process of detaching, used by the timeout logic. Converted and tested: - ehci - ohci Converted and compile-tested: - ahci (XXX did this ever work?) - dwc2 - motg (XXX missing usbd_xfer_schedule_timeout in motg_*_start?) - uhci - xhci Not changed: - slhci (sys/dev/ic/sl811hs.c) -- doesn't use a separate per-xfer callout for timeouts (XXX but maybe should?) - ugenhc (sys/rump/dev/lib/libugenhc/ugenhc.c) -- doesn't manage its own transfer timeouts - vhci -- times transfers out only on detach; could be adapted easily if we wanted to use the xfer->ux_callout
Revision 1.15.2.1 / (download) - annotate - [select for diffs], Mon Jun 10 22:06:29 2019 UTC (4 years, 10 months ago) by christos
Branch: phil-wifi
Changes since 1.15: +7 -6
lines
Diff to previous 1.15 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD
Revision 1.17 / (download) - annotate - [select for diffs], Sun Feb 17 04:17:52 2019 UTC (5 years, 2 months ago) by rin
Branch: MAIN
CVS Tags: phil-wifi-20191119,
phil-wifi-20190609,
netbsd-9-base,
netbsd-9-0-RELEASE,
netbsd-9-0-RC2,
netbsd-9-0-RC1,
isaki-audio2-base,
isaki-audio2,
ad-namecache-base2,
ad-namecache-base1,
ad-namecache-base
Branch point for: netbsd-9,
ad-namecache
Changes since 1.16: +4 -3
lines
Diff to previous 1.16 (colored) to selected 1.7.6.1 (colored)
Fix assertion failures triggered by usbdi.c,v 1.182, when devices are detached. This is because xfers of USBD_NOT_STARTED can be removed from queue in an invisible way to host controller drivers. Discussed on tech-kern.
Revision 1.14.8.2 / (download) - annotate - [select for diffs], Thu Sep 6 06:55:37 2018 UTC (5 years, 7 months ago) by pgoyette
Branch: pgoyette-compat
CVS Tags: pgoyette-compat-merge-20190127
Changes since 1.14.8.1: +5 -5
lines
Diff to previous 1.14.8.1 (colored) to branchpoint 1.14 (colored) next main 1.15 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD Resolve a couple of conflicts (result of the uimin/uimax changes)
Revision 1.16 / (download) - annotate - [select for diffs], Mon Sep 3 16:29:25 2018 UTC (5 years, 7 months ago) by riastradh
Branch: MAIN
CVS Tags: pgoyette-compat-20190127,
pgoyette-compat-20190118,
pgoyette-compat-1226,
pgoyette-compat-1126,
pgoyette-compat-1020,
pgoyette-compat-0930,
pgoyette-compat-0906
Changes since 1.15: +5 -5
lines
Diff to previous 1.15 (colored) to selected 1.7.6.1 (colored)
Rename min/max -> uimin/uimax for better honesty. These functions are defined on unsigned int. The generic name min/max should not silently truncate to 32 bits on 64-bit systems. This is purely a name change -- no functional change intended. HOWEVER! Some subsystems have #define min(a, b) ((a) < (b) ? (a) : (b)) #define max(a, b) ((a) > (b) ? (a) : (b)) even though our standard name for that is MIN/MAX. Although these may invite multiple evaluation bugs, these do _not_ cause integer truncation. To avoid `fixing' these cases, I first changed the name in libkern, and then compile-tested every file where min/max occurred in order to confirm that it failed -- and thus confirm that nothing shadowed min/max -- before changing it. I have left a handful of bootloaders that are too annoying to compile-test, and some dead code: cobalt ews4800mips hp300 hppa ia64 luna68k vax acorn32/if_ie.c (not included in any kernels) macppc/if_gm.c (superseded by gem(4)) It should be easy to fix the fallout once identified -- this way of doing things fails safe, and the goal here, after all, is to _avoid_ silent integer truncations, not introduce them. Maybe one day we can reintroduce min/max as type-generic things that never silently truncate. But we should avoid doing that for a while, so that existing code has a chance to be detected by the compiler for conversion to uimin/uimax without changing the semantics until we can properly audit it all. (Who knows, maybe in some cases integer truncation is actually intended!)
Revision 1.14.8.1 / (download) - annotate - [select for diffs], Mon Apr 16 01:59:55 2018 UTC (6 years ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.14: +5 -16
lines
Diff to previous 1.14 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD, resolve some conflicts
Revision 1.15 / (download) - annotate - [select for diffs], Mon Apr 9 16:21:10 2018 UTC (6 years ago) by jakllsch
Branch: MAIN
CVS Tags: phil-wifi-base,
pgoyette-compat-0728,
pgoyette-compat-0625,
pgoyette-compat-0521,
pgoyette-compat-0502,
pgoyette-compat-0422,
pgoyette-compat-0415
Branch point for: phil-wifi
Changes since 1.14: +5 -16
lines
Diff to previous 1.14 (colored) to selected 1.7.6.1 (colored)
Stop potential misuse of vendor names and USB vendor IDs in root hub device and string descriptors. Firstly: Few vendors have identical PCI-SIG vendor IDs and USB-IF vendor IDs. As such, using the PCI vendor ID as a USB vendor ID may trample on whomever is allocated that USB vendor ID. Secondly: The vendor of the host controller hardware implementation has little to nothing to do with our usbroothub implementation. Thus we should not potentially associate any problems therewith to such third party. This change will result in root hubs being identified by USB Vendor ID 0x0000. Root hub vendor string will now be "NetBSD" (or, specifically: ostype). Product ID (0x0000) and product strings remain unchanged.
Revision 1.8.2.3 / (download) - annotate - [select for diffs], Sun Dec 3 11:36:26 2017 UTC (6 years, 4 months ago) by jdolecek
Branch: tls-maxphys
Changes since 1.8.2.2: +332 -615
lines
Diff to previous 1.8.2.2 (colored) to branchpoint 1.8 (colored) next main 1.9 (colored) to selected 1.7.6.1 (colored)
update from HEAD
Revision 1.12.6.17 / (download) - annotate - [select for diffs], Mon Aug 28 17:51:45 2017 UTC (6 years, 7 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.16: +4 -6
lines
Diff to previous 1.12.6.16 (colored) to branchpoint 1.12 (colored) next main 1.13 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD
Revision 1.14 / (download) - annotate - [select for diffs], Thu Jun 1 02:45:06 2017 UTC (6 years, 10 months ago) by chs
Branch: MAIN
CVS Tags: tls-maxphys-base-20171202,
pgoyette-compat-base,
pgoyette-compat-0407,
pgoyette-compat-0330,
pgoyette-compat-0322,
pgoyette-compat-0315,
perseant-stdc-iso10646-base,
perseant-stdc-iso10646,
nick-nhusb-base-20170825,
netbsd-8-base,
netbsd-8-1-RELEASE,
netbsd-8-1-RC1,
netbsd-8-0-RELEASE,
netbsd-8-0-RC2,
netbsd-8-0-RC1,
matt-nb8-mediatek-base,
matt-nb8-mediatek
Branch point for: pgoyette-compat,
netbsd-8
Changes since 1.13: +4 -6
lines
Diff to previous 1.13 (colored) to selected 1.7.6.1 (colored)
remove checks for failure after memory allocation calls that cannot fail: kmem_alloc() with KM_SLEEP kmem_zalloc() with KM_SLEEP percpu_alloc() pserialize_create() psref_class_create() all of these paths include an assertion that the allocation has not failed, so callers should not assert that again.
Revision 1.12.4.1 / (download) - annotate - [select for diffs], Wed Apr 5 19:54:17 2017 UTC (7 years ago) by snj
Branch: netbsd-7
CVS Tags: netbsd-7-2-RELEASE
Changes since 1.12: +333 -614
lines
Diff to previous 1.12 (colored) next main 1.13 (colored) to selected 1.7.6.1 (colored)
Pull up following revision(s) (requested by skrll in ticket #1395): share/man/man4/axe.4: netbsd-7-nhusb share/man/man4/axen.4: netbsd-7-nhusb share/man/man4/cdce.4: netbsd-7-nhusb share/man/man4/uaudio.4: netbsd-7-nhusb share/man/man4/ucom.4: netbsd-7-nhusb share/man/man4/uep.4: netbsd-7-nhusb share/man/man4/urtw.4: netbsd-7-nhusb share/man/man4/usb.4: netbsd-7-nhusb share/man/man4/uyap.4: netbsd-7-nhusb share/man/man4/xhci.4: netbsd-7-nhusb share/man/man9/usbdi.9: netbsd-7-nhusb sys/arch/amd64/conf/ALL: netbsd-7-nhusb sys/arch/amd64/conf/GENERIC: netbsd-7-nhusb sys/arch/amiga/dev/slhci_zbus.c: netbsd-7-nhusb sys/arch/arm/allwinner/awin_otg.c: netbsd-7-nhusb sys/arch/arm/allwinner/awin_usb.c: netbsd-7-nhusb sys/arch/arm/amlogic/amlogic_dwctwo.c: netbsd-7-nhusb sys/arch/arm/at91/at91ohci.c: netbsd-7-nhusb sys/arch/arm/broadcom/bcm2835_dwctwo.c: netbsd-7-nhusb sys/arch/arm/broadcom/bcm53xx_usb.c: netbsd-7-nhusb sys/arch/arm/ep93xx/epohci.c: netbsd-7-nhusb sys/arch/arm/gemini/obio_ehci.c: netbsd-7-nhusb sys/arch/arm/imx/files.imx23: netbsd-7-nhusb sys/arch/arm/imx/imxusb.c: netbsd-7-nhusb sys/arch/arm/imx/imxusbreg.h: netbsd-7-nhusb sys/arch/arm/omap/obio_ohci.c: netbsd-7-nhusb sys/arch/arm/omap/omap3_ehci.c: netbsd-7-nhusb sys/arch/arm/omap/omapl1x_ohci.c: netbsd-7-nhusb sys/arch/arm/omap/tiotg.c: netbsd-7-nhusb sys/arch/arm/s3c2xx0/ohci_s3c24x0.c: netbsd-7-nhusb sys/arch/arm/samsung/exynos_usb.c: netbsd-7-nhusb sys/arch/arm/xscale/pxa2x0_ohci.c: netbsd-7-nhusb sys/arch/arm/zynq/zynq_usb.c: netbsd-7-nhusb sys/arch/hpcarm/dev/nbp_slhci.c: netbsd-7-nhusb sys/arch/hpcmips/dev/plumohci.c: netbsd-7-nhusb sys/arch/i386/conf/ALL: netbsd-7-nhusb sys/arch/i386/conf/GENERIC: netbsd-7-nhusb sys/arch/i386/pci/gcscehci.c: netbsd-7-nhusb sys/arch/luna68k/conf/GENERIC: netbsd-7-nhusb sys/arch/mips/adm5120/dev/ahci.c: netbsd-7-nhusb sys/arch/mips/adm5120/dev/ahcivar.h: netbsd-7-nhusb sys/arch/mips/alchemy/dev/ohci_aubus.c: netbsd-7-nhusb sys/arch/mips/atheros/dev/ehci_arbus.c: netbsd-7-nhusb sys/arch/mips/atheros/dev/ohci_arbus.c: netbsd-7-nhusb sys/arch/mips/conf/files.adm5120: netbsd-7-nhusb sys/arch/mips/ralink/ralink_ehci.c: netbsd-7-nhusb sys/arch/mips/ralink/ralink_ohci.c: netbsd-7-nhusb sys/arch/mips/rmi/rmixl_ehci.c: netbsd-7-nhusb sys/arch/mips/rmi/rmixl_ohci.c: netbsd-7-nhusb sys/arch/playstation2/dev/ohci_sbus.c: netbsd-7-nhusb sys/arch/powerpc/booke/dev/pq3ehci.c: netbsd-7-nhusb sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c: netbsd-7-nhusb sys/arch/x68k/dev/slhci_intio.c: netbsd-7-nhusb sys/conf/files: netbsd-7-nhusb sys/dev/cardbus/ehci_cardbus.c: netbsd-7-nhusb sys/dev/cardbus/ohci_cardbus.c: netbsd-7-nhusb sys/dev/cardbus/uhci_cardbus.c: netbsd-7-nhusb sys/dev/ic/sl811hs.c: netbsd-7-nhusb sys/dev/ic/sl811hsvar.h: netbsd-7-nhusb sys/dev/isa/slhci_isa.c: netbsd-7-nhusb sys/dev/marvell/ehci_mv.c: netbsd-7-nhusb sys/dev/pci/ehci_pci.c: netbsd-7-nhusb sys/dev/pci/ohci_pci.c: netbsd-7-nhusb sys/dev/pci/uhci_pci.c: netbsd-7-nhusb sys/dev/pci/xhci_pci.c: netbsd-7-nhusb sys/dev/pcmcia/slhci_pcmcia.c: netbsd-7-nhusb sys/dev/usb/Makefile.usbdevs: netbsd-7-nhusb sys/dev/usb/TODO: netbsd-7-nhusb sys/dev/usb/TODO.usbmp: netbsd-7-nhusb sys/dev/usb/aubtfwl.c: netbsd-7-nhusb sys/dev/usb/auvitek.c: netbsd-7-nhusb sys/dev/usb/auvitek_audio.c: netbsd-7-nhusb sys/dev/usb/auvitek_dtv.c: netbsd-7-nhusb sys/dev/usb/auvitek_i2c.c: netbsd-7-nhusb sys/dev/usb/auvitek_video.c: netbsd-7-nhusb sys/dev/usb/auvitekvar.h: netbsd-7-nhusb sys/dev/usb/ehci.c: netbsd-7-nhusb sys/dev/usb/ehcireg.h: netbsd-7-nhusb sys/dev/usb/ehcivar.h: netbsd-7-nhusb sys/dev/usb/emdtv.c: netbsd-7-nhusb sys/dev/usb/emdtv_dtv.c: netbsd-7-nhusb sys/dev/usb/emdtv_ir.c: netbsd-7-nhusb sys/dev/usb/emdtvvar.h: netbsd-7-nhusb sys/dev/usb/ezload.c: netbsd-7-nhusb sys/dev/usb/ezload.h: netbsd-7-nhusb sys/dev/usb/files.usb: netbsd-7-nhusb sys/dev/usb/hid.c: netbsd-7-nhusb sys/dev/usb/hid.h: netbsd-7-nhusb sys/dev/usb/if_athn_usb.c: netbsd-7-nhusb sys/dev/usb/if_athn_usb.h: netbsd-7-nhusb sys/dev/usb/if_atu.c: netbsd-7-nhusb sys/dev/usb/if_atureg.h: netbsd-7-nhusb sys/dev/usb/if_aue.c: netbsd-7-nhusb sys/dev/usb/if_auereg.h: netbsd-7-nhusb sys/dev/usb/if_axe.c: netbsd-7-nhusb sys/dev/usb/if_axen.c: netbsd-7-nhusb sys/dev/usb/if_axenreg.h: netbsd-7-nhusb sys/dev/usb/if_axereg.h: netbsd-7-nhusb sys/dev/usb/if_cdce.c: netbsd-7-nhusb sys/dev/usb/if_cdcereg.h: netbsd-7-nhusb sys/dev/usb/if_cue.c: netbsd-7-nhusb sys/dev/usb/if_cuereg.h: netbsd-7-nhusb sys/dev/usb/if_kue.c: netbsd-7-nhusb sys/dev/usb/if_kuereg.h: netbsd-7-nhusb sys/dev/usb/if_otus.c: netbsd-7-nhusb sys/dev/usb/if_otusvar.h: netbsd-7-nhusb sys/dev/usb/if_rum.c: netbsd-7-nhusb sys/dev/usb/if_rumreg.h: netbsd-7-nhusb sys/dev/usb/if_rumvar.h: netbsd-7-nhusb sys/dev/usb/if_run.c: netbsd-7-nhusb sys/dev/usb/if_runvar.h: netbsd-7-nhusb sys/dev/usb/if_smsc.c: netbsd-7-nhusb sys/dev/usb/if_smscreg.h: netbsd-7-nhusb sys/dev/usb/if_smscvar.h: netbsd-7-nhusb sys/dev/usb/if_udav.c: netbsd-7-nhusb sys/dev/usb/if_udavreg.h: netbsd-7-nhusb sys/dev/usb/if_upgt.c: netbsd-7-nhusb sys/dev/usb/if_upgtvar.h: netbsd-7-nhusb sys/dev/usb/if_upl.c: netbsd-7-nhusb sys/dev/usb/if_ural.c: netbsd-7-nhusb sys/dev/usb/if_uralreg.h: netbsd-7-nhusb sys/dev/usb/if_uralvar.h: netbsd-7-nhusb sys/dev/usb/if_url.c: netbsd-7-nhusb sys/dev/usb/if_urlreg.h: netbsd-7-nhusb sys/dev/usb/if_urndis.c: netbsd-7-nhusb sys/dev/usb/if_urndisreg.h: netbsd-7-nhusb sys/dev/usb/if_urtw.c: netbsd-7-nhusb sys/dev/usb/if_urtwn.c: netbsd-7-nhusb sys/dev/usb/if_urtwn_data.h: netbsd-7-nhusb sys/dev/usb/if_urtwnreg.h: netbsd-7-nhusb sys/dev/usb/if_urtwnvar.h: netbsd-7-nhusb sys/dev/usb/if_urtwreg.h: netbsd-7-nhusb sys/dev/usb/if_zyd.c: netbsd-7-nhusb sys/dev/usb/if_zydreg.h: netbsd-7-nhusb sys/dev/usb/irmce.c: netbsd-7-nhusb sys/dev/usb/moscom.c: netbsd-7-nhusb sys/dev/usb/motg.c: netbsd-7-nhusb sys/dev/usb/motgvar.h: netbsd-7-nhusb sys/dev/usb/ohci.c: netbsd-7-nhusb sys/dev/usb/ohcireg.h: netbsd-7-nhusb sys/dev/usb/ohcivar.h: netbsd-7-nhusb sys/dev/usb/pseye.c: netbsd-7-nhusb sys/dev/usb/slurm.c: netbsd-7-nhusb sys/dev/usb/stuirda.c: netbsd-7-nhusb sys/dev/usb/u3g.c: netbsd-7-nhusb sys/dev/usb/uark.c: netbsd-7-nhusb sys/dev/usb/uatp.c: netbsd-7-nhusb sys/dev/usb/uaudio.c: netbsd-7-nhusb sys/dev/usb/uberry.c: netbsd-7-nhusb sys/dev/usb/ubsa.c: netbsd-7-nhusb sys/dev/usb/ubsa_common.c: netbsd-7-nhusb sys/dev/usb/ubsavar.h: netbsd-7-nhusb sys/dev/usb/ubt.c: netbsd-7-nhusb sys/dev/usb/uchcom.c: netbsd-7-nhusb sys/dev/usb/ucom.c: netbsd-7-nhusb sys/dev/usb/ucomvar.h: netbsd-7-nhusb sys/dev/usb/ucycom.c: netbsd-7-nhusb sys/dev/usb/udl.c: netbsd-7-nhusb sys/dev/usb/udl.h: netbsd-7-nhusb sys/dev/usb/udsbr.c: netbsd-7-nhusb sys/dev/usb/udsir.c: netbsd-7-nhusb sys/dev/usb/uep.c: netbsd-7-nhusb sys/dev/usb/uftdi.c: netbsd-7-nhusb sys/dev/usb/uftdireg.h: netbsd-7-nhusb sys/dev/usb/ugen.c: netbsd-7-nhusb sys/dev/usb/ugensa.c: netbsd-7-nhusb sys/dev/usb/uhci.c: netbsd-7-nhusb sys/dev/usb/uhcireg.h: netbsd-7-nhusb sys/dev/usb/uhcivar.h: netbsd-7-nhusb sys/dev/usb/uhid.c: netbsd-7-nhusb sys/dev/usb/uhidev.c: netbsd-7-nhusb sys/dev/usb/uhidev.h: netbsd-7-nhusb sys/dev/usb/uhmodem.c: netbsd-7-nhusb sys/dev/usb/uhso.c: netbsd-7-nhusb sys/dev/usb/uhub.c: netbsd-7-nhusb sys/dev/usb/uipad.c: netbsd-7-nhusb sys/dev/usb/uipaq.c: netbsd-7-nhusb sys/dev/usb/uirda.c: netbsd-7-nhusb sys/dev/usb/uirdavar.h: netbsd-7-nhusb sys/dev/usb/ukbd.c: netbsd-7-nhusb sys/dev/usb/ukbdmap.c: netbsd-7-nhusb sys/dev/usb/ukyopon.c: netbsd-7-nhusb sys/dev/usb/ukyopon.h: netbsd-7-nhusb sys/dev/usb/ulpt.c: netbsd-7-nhusb sys/dev/usb/umass.c: netbsd-7-nhusb sys/dev/usb/umass_isdata.c: netbsd-7-nhusb sys/dev/usb/umass_isdata.h: netbsd-7-nhusb sys/dev/usb/umass_quirks.c: netbsd-7-nhusb sys/dev/usb/umass_quirks.h: netbsd-7-nhusb sys/dev/usb/umass_scsipi.c: netbsd-7-nhusb sys/dev/usb/umass_scsipi.h: netbsd-7-nhusb sys/dev/usb/umassvar.h: netbsd-7-nhusb sys/dev/usb/umcs.c: netbsd-7-nhusb sys/dev/usb/umct.c: netbsd-7-nhusb sys/dev/usb/umidi.c: netbsd-7-nhusb sys/dev/usb/umidi_quirks.c: netbsd-7-nhusb sys/dev/usb/umidi_quirks.h: netbsd-7-nhusb sys/dev/usb/umodem.c: netbsd-7-nhusb sys/dev/usb/umodem_common.c: netbsd-7-nhusb sys/dev/usb/umodemvar.h: netbsd-7-nhusb sys/dev/usb/ums.c: netbsd-7-nhusb sys/dev/usb/uplcom.c: netbsd-7-nhusb sys/dev/usb/urio.c: netbsd-7-nhusb sys/dev/usb/urio.h: netbsd-7-nhusb sys/dev/usb/usb.c: netbsd-7-nhusb sys/dev/usb/usb.h: netbsd-7-nhusb sys/dev/usb/usb_mem.c: netbsd-7-nhusb sys/dev/usb/usb_mem.h: netbsd-7-nhusb sys/dev/usb/usb_quirks.c: netbsd-7-nhusb sys/dev/usb/usb_quirks.h: netbsd-7-nhusb sys/dev/usb/usb_subr.c: netbsd-7-nhusb sys/dev/usb/usbdevices.config: netbsd-7-nhusb sys/dev/usb/usbdevs: netbsd-7-nhusb sys/dev/usb/usbdevs.h: netbsd-7-nhusb sys/dev/usb/usbdevs_data.h: netbsd-7-nhusb sys/dev/usb/usbdi.c: netbsd-7-nhusb sys/dev/usb/usbdi.h: netbsd-7-nhusb sys/dev/usb/usbdi_util.c: netbsd-7-nhusb sys/dev/usb/usbdi_util.h: netbsd-7-nhusb sys/dev/usb/usbdivar.h: netbsd-7-nhusb sys/dev/usb/usbhid.h: netbsd-7-nhusb sys/dev/usb/usbhist.h: netbsd-7-nhusb sys/dev/usb/usbroothub.c: netbsd-7-nhusb sys/dev/usb/usbroothub.h: netbsd-7-nhusb sys/dev/usb/usbroothub_subr.c: delete sys/dev/usb/usbroothub_subr.h: delete sys/dev/usb/uscanner.c: netbsd-7-nhusb sys/dev/usb/uslsa.c: netbsd-7-nhusb sys/dev/usb/usscanner.c: netbsd-7-nhusb sys/dev/usb/ustir.c: netbsd-7-nhusb sys/dev/usb/uthum.c: netbsd-7-nhusb sys/dev/usb/utoppy.c: netbsd-7-nhusb sys/dev/usb/uts.c: netbsd-7-nhusb sys/dev/usb/uvideo.c: netbsd-7-nhusb sys/dev/usb/uvisor.c: netbsd-7-nhusb sys/dev/usb/uvscom.c: netbsd-7-nhusb sys/dev/usb/uyap.c: netbsd-7-nhusb sys/dev/usb/uyap_firmware.h: netbsd-7-nhusb sys/dev/usb/uyurex.c: netbsd-7-nhusb sys/dev/usb/x1input_rdesc.h: netbsd-7-nhusb sys/dev/usb/xhci.c: netbsd-7-nhusb sys/dev/usb/xhcireg.h: netbsd-7-nhusb sys/dev/usb/xhcivar.h: netbsd-7-nhusb sys/dev/usb/xinput_rdesc.h: netbsd-7-nhusb sys/external/bsd/common/conf/files.linux: netbsd-7-nhusb sys/external/bsd/common/include/linux/err.h: netbsd-7-nhusb sys/external/bsd/common/include/linux/kernel.h: netbsd-7-nhusb sys/external/bsd/common/include/linux/workqueue.h: netbsd-7-nhusb sys/external/bsd/common/linux/linux_work.c: netbsd-7-nhusb sys/external/bsd/drm2/dist/drm/radeon/atombios_encoders.c: netbsd-7-nhusb sys/external/bsd/drm2/dist/drm/radeon/radeon_legacy_encoders.c: netbsd-7-nhusb sys/external/bsd/drm2/drm/files.drmkms: netbsd-7-nhusb sys/external/bsd/drm2/i915drm/files.i915drmkms: netbsd-7-nhusb sys/external/bsd/drm2/include/linux/err.h: delete sys/external/bsd/drm2/include/linux/workqueue.h: delete sys/external/bsd/drm2/linux/files.drmkms_linux: netbsd-7-nhusb sys/external/bsd/drm2/linux/linux_work.c: delete sys/external/bsd/dwc2/dwc2.c: netbsd-7-nhusb sys/external/bsd/dwc2/dwc2.h: netbsd-7-nhusb sys/external/bsd/dwc2/dwc2var.h: netbsd-7-nhusb sys/external/bsd/dwc2/dwctwo2netbsd: netbsd-7-nhusb sys/external/bsd/dwc2/conf/files.dwc2: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_core.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_core.h: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_coreintr.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hcd.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hcd.h: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hcdddma.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hcdintr.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hcdqueue.c: netbsd-7-nhusb sys/external/bsd/dwc2/dist/dwc2_hw.h: netbsd-7-nhusb sys/modules/drmkms_linux/Makefile: netbsd-7-nhusb sys/modules/i915drmkms/Makefile: netbsd-7-nhusb sys/rump/dev/lib/libugenhc/ugenhc.c: netbsd-7-nhusb sys/rump/dev/lib/libusb/Makefile: netbsd-7-nhusb sys/rump/dev/lib/libusb/USB.ioconf: netbsd-7-nhusb sys/rump/dev/lib/libusb/usb_at_ugenhc.c: delete sys/rump/dev/lib/libusb/opt/opt_usb.h: delete sys/rump/dev/lib/libusb/opt/opt_usbverbose.h: delete sys/sys/mbuf.h: netbsd-7-nhusb usr.sbin/usbdevs/usbdevs.8: netbsd-7-nhusb usr.sbin/usbdevs/usbdevs.c: netbsd-7-nhusb Merge netbsd-7-nhusb: - API / infrastructure changes to support memory management changes. - Memory management improvements and bug fixes. - HCDs should now be MP safe - conversion to KERNHIST based debug - FS/LS isoc support on ehci(4). - conversion to kmem(9) - Some USB 3 support - mostly from Takahiro HAYASHI (t-hash). - interrupt transfers now get proper DMA operations - general bug fixes - kern/48308 - uhub status notification improvements - umass(4) probe fix (applied to HEAD already) - ohci(4) short transfer fix - Change the SOFTINT level from NET to SERIAL for the USB softint handler. This gives the callback a chance of running when another softint handler at SOFTINT_NET has blocked holding a lock, e.g. softnet_lock and most of the network stack. - kern/49065 - ifconfig tun0 ... sequence locks up system / lockup: softnet_lock held across usb xfr - kern/50491 - unkillable wait in usbd_transfer while using usmsc0 on raspberry pi 2 - kern/51395 - USB Ethernet makes xhci hang - Various improvements to slhci(4) - Various improvements to dwc2(4)
Revision 1.12.10.2 / (download) - annotate - [select for diffs], Mon Jan 23 08:02:54 2017 UTC (7 years, 2 months ago) by skrll
Branch: netbsd-7-nhusb
Changes since 1.12.10.1: +329 -610
lines
Diff to previous 1.12.10.1 (colored) to branchpoint 1.12 (colored) next main 1.13 (colored) to selected 1.7.6.1 (colored)
Adapt to branch
Revision 1.12.10.1 / (download) - annotate - [select for diffs], Tue Sep 6 20:33:07 2016 UTC (7 years, 7 months ago) by skrll
Branch: netbsd-7-nhusb
Changes since 1.12: +7 -7
lines
Diff to previous 1.12 (colored) to selected 1.7.6.1 (colored)
First pass at netbsd-7 updated with USB code from HEAD
Revision 1.13 / (download) - annotate - [select for diffs], Sat Apr 23 10:15:29 2016 UTC (7 years, 11 months ago) by skrll
Branch: MAIN
CVS Tags: prg-localcount2-base3,
prg-localcount2-base2,
prg-localcount2-base1,
prg-localcount2-base,
prg-localcount2,
pgoyette-localcount-base,
pgoyette-localcount-20170426,
pgoyette-localcount-20170320,
pgoyette-localcount-20170107,
pgoyette-localcount-20161104,
pgoyette-localcount-20160806,
pgoyette-localcount-20160726,
pgoyette-localcount,
nick-nhusb-base-20170204,
nick-nhusb-base-20161204,
nick-nhusb-base-20161004,
nick-nhusb-base-20160907,
nick-nhusb-base-20160529,
localcount-20160914,
jdolecek-ncq-base,
jdolecek-ncq,
bouyer-socketcan-base1,
bouyer-socketcan-base,
bouyer-socketcan
Changes since 1.12: +333 -614
lines
Diff to previous 1.12 (colored) to selected 1.7.6.1 (colored)
Merge nick-nhusb - API / infrastructure changes to support memory management changes. - Memory management improvements and bug fixes. - HCDs should now be MP safe - conversion to KERNHIST based debug - FS/LS isoc support on ehci(4). - conversion to kmem(9) - Some USB 3 support - mostly from Takahiro HAYASHI (t-hash). - interrupt transfers now get proper DMA operations - general bug fixes - kern/48308 - uhub status notification improvements - umass(4) probe fix (applied to HEAD already) - ohci(4) short transfer fix
Revision 1.12.6.16 / (download) - annotate - [select for diffs], Sat Dec 12 15:03:56 2015 UTC (8 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.15: +3 -3
lines
Diff to previous 1.12.6.15 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Whitespace
Revision 1.12.6.15 / (download) - annotate - [select for diffs], Thu Oct 22 11:15:42 2015 UTC (8 years, 5 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.14: +3 -3
lines
Diff to previous 1.12.6.14 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Simplify *_XFER2SC using ux_bus
Revision 1.12.6.14 / (download) - annotate - [select for diffs], Tue Oct 20 15:31:21 2015 UTC (8 years, 6 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.13: +21 -18
lines
Diff to previous 1.12.6.13 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Consistently providei/use *_{XFER,PIPE,BUS}2SC, etc macros
Revision 1.12.6.13 / (download) - annotate - [select for diffs], Sun Oct 11 09:17:50 2015 UTC (8 years, 6 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.12: +5 -4
lines
Diff to previous 1.12.6.12 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Update ubm_allocx with the isoc frame count parameter and use it in dwctwo(4)
Revision 1.12.6.12 / (download) - annotate - [select for diffs], Thu Mar 19 17:26:42 2015 UTC (9 years, 1 month ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.11: +82 -82
lines
Diff to previous 1.12.6.11 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Do the same as OpenBSD and get rid of the *_handle typedefs and use plain structures insteads
Revision 1.12.6.11 / (download) - annotate - [select for diffs], Fri Dec 5 09:37:49 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.10: +7 -7
lines
Diff to previous 1.12.6.10 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
KNF. Remove ( ) from return statements.
Revision 1.12.6.10 / (download) - annotate - [select for diffs], Thu Dec 4 08:04:31 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.9: +58 -325
lines
Diff to previous 1.12.6.9 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Rework roothub control transfers so that much of the code is shared across HCDs. I have retained the vendor/product reporting for each HCD for now, but it maybe get removed later. ahci(4) now reports a language table and uses the usb_makestrdesc function instead of rolling its own version.
Revision 1.12.6.9 / (download) - annotate - [select for diffs], Wed Dec 3 22:40:54 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.8: +8 -9
lines
Diff to previous 1.12.6.8 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Provide a USETWD macro for use with USB words designated initialisers.
Revision 1.12.6.8 / (download) - annotate - [select for diffs], Wed Dec 3 14:18:07 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.7: +6 -6
lines
Diff to previous 1.12.6.7 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Replace malloc(9) with kmem(9)
Revision 1.12.6.7 / (download) - annotate - [select for diffs], Wed Dec 3 13:19:38 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.6: +38 -36
lines
Diff to previous 1.12.6.6 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Use designated initializers for more descriptors.
Revision 1.12.6.6 / (download) - annotate - [select for diffs], Wed Dec 3 13:08:59 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.5: +19 -17
lines
Diff to previous 1.12.6.5 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Use designated initialisers for usb_device_descriptor_t structs.
Revision 1.12.6.5 / (download) - annotate - [select for diffs], Wed Dec 3 12:52:05 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.4: +97 -97
lines
Diff to previous 1.12.6.4 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
The grand renaming of structure members. No functional change.
Revision 1.12.6.4 / (download) - annotate - [select for diffs], Tue Dec 2 09:00:33 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.3: +3 -24
lines
Diff to previous 1.12.6.3 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Step #1 of memory allocation re-organisation. Centralised the buffer allocation routine which now supports DMA and non-DMA capable host controllers. Remove the ubm_{alloc,free}m methods from usbd_bus_methods. The buffer allocation is only allowed in thread context and, therefore, negates the usefulness of the reserve dma code which is removed in this change. USBD_NO_COPY is also no longer required as usbd_transfer and usbd_transfer_complete now track buffer usage and handle any copying.
Revision 1.12.6.3 / (download) - annotate - [select for diffs], Mon Dec 1 12:38:39 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.2: +46 -46
lines
Diff to previous 1.12.6.2 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Add prefixes to method structures member names. No functional change.
Revision 1.12.6.2 / (download) - annotate - [select for diffs], Sun Nov 30 13:14:11 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12.6.1: +60 -60
lines
Diff to previous 1.12.6.1 (colored) to branchpoint 1.12 (colored) to selected 1.7.6.1 (colored)
Whitespace
Revision 1.12.6.1 / (download) - annotate - [select for diffs], Sun Nov 30 12:18:58 2014 UTC (9 years, 4 months ago) by skrll
Branch: nick-nhusb
Changes since 1.12: +23 -23
lines
Diff to previous 1.12 (colored) to selected 1.7.6.1 (colored)
Use C99 types. u_int{8,16,32,64}_t to uint{8,16,32,64}_t. No functional change.
Revision 1.8.2.2 / (download) - annotate - [select for diffs], Wed Aug 20 00:03:12 2014 UTC (9 years, 8 months ago) by tls
Branch: tls-maxphys
Changes since 1.8.2.1: +100 -83
lines
Diff to previous 1.8.2.1 (colored) to branchpoint 1.8 (colored) to selected 1.7.6.1 (colored)
Rebase to HEAD as of a few days ago.
Revision 1.7.2.3 / (download) - annotate - [select for diffs], Thu May 22 11:39:57 2014 UTC (9 years, 11 months ago) by yamt
Branch: yamt-pagecache
Changes since 1.7.2.2: +100 -83
lines
Diff to previous 1.7.2.2 (colored) to branchpoint 1.7 (colored) next main 1.8 (colored) to selected 1.7.6.1 (colored)
sync with head. for a reference, the tree before this commit was tagged as yamt-pagecache-tag8. this commit was splitted into small chunks to avoid a limitation of cvs. ("Protocol error: too many arguments")
Revision 1.9.2.1 / (download) - annotate - [select for diffs], Sun May 18 17:45:17 2014 UTC (9 years, 11 months ago) by rmind
Branch: rmind-smpnet
Changes since 1.9: +100 -83
lines
Diff to previous 1.9 (colored) next main 1.10 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.12 / (download) - annotate - [select for diffs], Sun Sep 22 08:30:22 2013 UTC (10 years, 6 months ago) by skrll
Branch: MAIN
CVS Tags: yamt-pagecache-base9,
tls-maxphys-base,
tls-earlyentropy-base,
tls-earlyentropy,
rmind-smpnet-nbase,
rmind-smpnet-base,
riastradh-xf86-video-intel-2-7-1-pre-2-21-15,
riastradh-drm2-base3,
nick-nhusb-base-20160422,
nick-nhusb-base-20160319,
nick-nhusb-base-20151226,
nick-nhusb-base-20150921,
nick-nhusb-base-20150606,
nick-nhusb-base-20150406,
nick-nhusb-base,
netbsd-7-nhusb-base-20170116,
netbsd-7-nhusb-base,
netbsd-7-base,
netbsd-7-1-RELEASE,
netbsd-7-1-RC2,
netbsd-7-1-RC1,
netbsd-7-1-2-RELEASE,
netbsd-7-1-1-RELEASE,
netbsd-7-1,
netbsd-7-0-RELEASE,
netbsd-7-0-RC3,
netbsd-7-0-RC2,
netbsd-7-0-RC1,
netbsd-7-0-2-RELEASE,
netbsd-7-0-1-RELEASE,
netbsd-7-0
Branch point for: nick-nhusb,
netbsd-7-nhusb,
netbsd-7
Changes since 1.11: +45 -28
lines
Diff to previous 1.11 (colored) to selected 1.7.6.1 (colored)
Adapt to usbmp. Compile tested only. Did this ever work?
Revision 1.11 / (download) - annotate - [select for diffs], Sun Sep 22 07:26:42 2013 UTC (10 years, 6 months ago) by skrll
Branch: MAIN
Changes since 1.10: +14 -14
lines
Diff to previous 1.10 (colored) to selected 1.7.6.1 (colored)
Remove trailing whitespace.
Revision 1.10 / (download) - annotate - [select for diffs], Mon Sep 2 15:48:08 2013 UTC (10 years, 7 months ago) by skrll
Branch: MAIN
Changes since 1.9: +45 -45
lines
Diff to previous 1.9 (colored) to selected 1.7.6.1 (colored)
Use C99 designated initializers.
Revision 1.8.2.1 / (download) - annotate - [select for diffs], Tue Nov 20 03:01:32 2012 UTC (11 years, 5 months ago) by tls
Branch: tls-maxphys
Changes since 1.8: +4 -4
lines
Diff to previous 1.8 (colored) to selected 1.7.6.1 (colored)
Resync to 2012-11-19 00:00:00 UTC
Revision 1.7.2.2 / (download) - annotate - [select for diffs], Tue Oct 30 17:19:58 2012 UTC (11 years, 5 months ago) by yamt
Branch: yamt-pagecache
CVS Tags: yamt-pagecache-tag8
Changes since 1.7.2.1: +4 -4
lines
Diff to previous 1.7.2.1 (colored) to branchpoint 1.7 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.9 / (download) - annotate - [select for diffs], Sat Oct 27 17:18:01 2012 UTC (11 years, 5 months ago) by chs
Branch: MAIN
CVS Tags: yamt-pagecache-base8,
yamt-pagecache-base7,
yamt-pagecache-base6,
riastradh-drm2-base2,
riastradh-drm2-base1,
riastradh-drm2-base,
riastradh-drm2,
khorben-n900,
agc-symver-base,
agc-symver
Branch point for: rmind-smpnet
Changes since 1.8: +4 -4
lines
Diff to previous 1.8 (colored) to selected 1.7.6.1 (colored)
split device_t/softc for all remaining drivers. replace "struct device *" with "device_t". use device_xname(), device_unit(), etc.
Revision 1.7.2.1 / (download) - annotate - [select for diffs], Tue Apr 17 00:06:38 2012 UTC (12 years ago) by yamt
Branch: yamt-pagecache
Changes since 1.7: +2 -6
lines
Diff to previous 1.7 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.8 / (download) - annotate - [select for diffs], Sun Mar 11 00:34:46 2012 UTC (12 years, 1 month ago) by mrg
Branch: MAIN
CVS Tags: yamt-pagecache-base5,
yamt-pagecache-base4,
jmcneill-usbmp-base9,
jmcneill-usbmp-base8,
jmcneill-usbmp-base7,
jmcneill-usbmp-base10
Branch point for: tls-maxphys
Changes since 1.7: +2 -6
lines
Diff to previous 1.7 (colored) to selected 1.7.6.1 (colored)
pull down from usbmp branch: - remove usbd_bus{} intr_context member, and replace the checks against it with cpu_intr_p() and cpu_softintr_p().
Revision 1.7.6.1 / (download) - annotate - [selected], Sat Feb 25 21:15:39 2012 UTC (12 years, 1 month ago) by mrg
Branch: jmcneill-usbmp
Changes since 1.7: +2 -6
lines
Diff to previous 1.7 (colored) next main 1.8 (colored)
catch up with bus->intr_context going away.
Revision 1.7 / (download) - annotate - [select for diffs], Fri Jul 1 18:38:49 2011 UTC (12 years, 9 months ago) by dyoung
Branch: MAIN
CVS Tags: yamt-pagecache-base3,
yamt-pagecache-base2,
yamt-pagecache-base,
netbsd-6-base,
netbsd-6-1-RELEASE,
netbsd-6-1-RC4,
netbsd-6-1-RC3,
netbsd-6-1-RC2,
netbsd-6-1-RC1,
netbsd-6-1-5-RELEASE,
netbsd-6-1-4-RELEASE,
netbsd-6-1-3-RELEASE,
netbsd-6-1-2-RELEASE,
netbsd-6-1-1-RELEASE,
netbsd-6-1,
netbsd-6-0-RELEASE,
netbsd-6-0-RC2,
netbsd-6-0-RC1,
netbsd-6-0-6-RELEASE,
netbsd-6-0-5-RELEASE,
netbsd-6-0-4-RELEASE,
netbsd-6-0-3-RELEASE,
netbsd-6-0-2-RELEASE,
netbsd-6-0-1-RELEASE,
netbsd-6-0,
netbsd-6,
matt-nb6-plus-nbase,
matt-nb6-plus-base,
matt-nb6-plus,
jmcneill-usbmp-pre-base2,
jmcneill-usbmp-base6,
jmcneill-usbmp-base5,
jmcneill-usbmp-base4,
jmcneill-usbmp-base3,
jmcneill-usbmp-base2,
jmcneill-usbmp-base,
jmcneill-audiomp3-base,
jmcneill-audiomp3
Branch point for: yamt-pagecache,
jmcneill-usbmp
Changes since 1.6: +3 -3
lines
Diff to previous 1.6 (colored) to selected 1.7.6.1 (colored)
#include <sys/bus.h> instead of <machine/bus.h>.
Revision 1.5.8.1 / (download) - annotate - [select for diffs], Mon Jun 6 09:06:01 2011 UTC (12 years, 10 months ago) by jruoho
Branch: jruoho-x86intr
Changes since 1.5: +10 -10
lines
Diff to previous 1.5 (colored) next main 1.6 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD.
Revision 1.5.6.1 / (download) - annotate - [select for diffs], Thu Apr 21 01:41:10 2011 UTC (13 years ago) by rmind
Branch: rmind-uvmplock
Changes since 1.5: +10 -10
lines
Diff to previous 1.5 (colored) next main 1.6 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.6 / (download) - annotate - [select for diffs], Mon Apr 4 19:58:56 2011 UTC (13 years ago) by dyoung
Branch: MAIN
CVS Tags: rmind-uvmplock-nbase,
rmind-uvmplock-base,
jym-xensuspend-nbase,
jym-xensuspend-base,
cherry-xenmp-base,
cherry-xenmp
Changes since 1.5: +10 -10
lines
Diff to previous 1.5 (colored) to selected 1.7.6.1 (colored)
Use callout(9) instead of the USB compatibility junk that went away months ago.
Revision 1.2.10.2 / (download) - annotate - [select for diffs], Mon May 4 08:11:30 2009 UTC (14 years, 11 months ago) by yamt
Branch: yamt-nfs-mp
Changes since 1.2.10.1: +18 -19
lines
Diff to previous 1.2.10.1 (colored) to branchpoint 1.2 (colored) next main 1.3 (colored) to selected 1.7.6.1 (colored)
sync with head.
Revision 1.4.6.1 / (download) - annotate - [select for diffs], Mon Jan 19 13:16:26 2009 UTC (15 years, 3 months ago) by skrll
Branch: nick-hppapmap
Changes since 1.4: +10 -10
lines
Diff to previous 1.4 (colored) next main 1.5 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD.
Revision 1.2.6.2 / (download) - annotate - [select for diffs], Sat Jan 17 13:28:15 2009 UTC (15 years, 3 months ago) by mjf
Branch: mjf-devfs2
Changes since 1.2.6.1: +8 -8
lines
Diff to previous 1.2.6.1 (colored) to branchpoint 1.2 (colored) next main 1.3 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD.
Revision 1.5 / (download) - annotate - [select for diffs], Tue Dec 16 22:35:24 2008 UTC (15 years, 4 months ago) by christos
Branch: MAIN
CVS Tags: yamt-nfs-mp-base9,
yamt-nfs-mp-base8,
yamt-nfs-mp-base7,
yamt-nfs-mp-base6,
yamt-nfs-mp-base5,
yamt-nfs-mp-base4,
yamt-nfs-mp-base3,
yamt-nfs-mp-base11,
yamt-nfs-mp-base10,
uebayasi-xip-base7,
uebayasi-xip-base6,
uebayasi-xip-base5,
uebayasi-xip-base4,
uebayasi-xip-base3,
uebayasi-xip-base2,
uebayasi-xip-base1,
uebayasi-xip-base,
uebayasi-xip,
nick-hppapmap-base4,
nick-hppapmap-base3,
nick-hppapmap-base2,
nick-hppapmap-base,
mjf-devfs2-base,
matt-premerge-20091211,
matt-mips64-premerge-20101231,
jymxensuspend-base,
jym-xensuspend,
jruoho-x86intr-base,
bouyer-quota2-nbase,
bouyer-quota2-base,
bouyer-quota2
Branch point for: rmind-uvmplock,
jruoho-x86intr
Changes since 1.4: +10 -10
lines
Diff to previous 1.4 (colored) to selected 1.7.6.1 (colored)
replace bitmask_snprintf(9) with snprintb(3)
Revision 1.3.2.1 / (download) - annotate - [select for diffs], Mon Jun 23 04:30:31 2008 UTC (15 years, 10 months ago) by wrstuden
Branch: wrstuden-revivesa
Changes since 1.3: +10 -11
lines
Diff to previous 1.3 (colored) next main 1.4 (colored) to selected 1.7.6.1 (colored)
Sync w/ -current. 34 merge conflicts to follow.
Revision 1.2.8.2 / (download) - annotate - [select for diffs], Wed Jun 4 02:04:50 2008 UTC (15 years, 10 months ago) by yamt
Branch: yamt-pf42
Changes since 1.2.8.1: +10 -11
lines
Diff to previous 1.2.8.1 (colored) to branchpoint 1.2 (colored) next main 1.3 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.2.6.1 / (download) - annotate - [select for diffs], Mon Jun 2 13:22:23 2008 UTC (15 years, 10 months ago) by mjf
Branch: mjf-devfs2
Changes since 1.2: +10 -18
lines
Diff to previous 1.2 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD.
Revision 1.4 / (download) - annotate - [select for diffs], Tue May 27 21:24:15 2008 UTC (15 years, 10 months ago) by dyoung
Branch: MAIN
CVS Tags: yamt-pf42-base4,
yamt-pf42-base3,
wrstuden-revivesa-base-4,
wrstuden-revivesa-base-3,
wrstuden-revivesa-base-2,
wrstuden-revivesa-base-1,
wrstuden-revivesa-base,
simonb-wapbl-nbase,
simonb-wapbl-base,
simonb-wapbl,
netbsd-5-base,
netbsd-5-2-RELEASE,
netbsd-5-2-RC1,
netbsd-5-2-3-RELEASE,
netbsd-5-2-2-RELEASE,
netbsd-5-2-1-RELEASE,
netbsd-5-2,
netbsd-5-1-RELEASE,
netbsd-5-1-RC4,
netbsd-5-1-RC3,
netbsd-5-1-RC2,
netbsd-5-1-RC1,
netbsd-5-1-5-RELEASE,
netbsd-5-1-4-RELEASE,
netbsd-5-1-3-RELEASE,
netbsd-5-1-2-RELEASE,
netbsd-5-1-1-RELEASE,
netbsd-5-1,
netbsd-5-0-RELEASE,
netbsd-5-0-RC4,
netbsd-5-0-RC3,
netbsd-5-0-RC2,
netbsd-5-0-RC1,
netbsd-5-0-2-RELEASE,
netbsd-5-0-1-RELEASE,
netbsd-5-0,
netbsd-5,
matt-nb5-pq3-base,
matt-nb5-pq3,
matt-nb5-mips64-u2-k2-k4-k7-k8-k9,
matt-nb5-mips64-u1-k1-k5,
matt-nb5-mips64-premerge-20101231,
matt-nb5-mips64-premerge-20091211,
matt-nb5-mips64-k15,
matt-nb5-mips64,
matt-nb4-mips64-k7-u2a-k9b,
matt-mips64-base2,
haad-nbase2,
haad-dm-base2,
haad-dm-base1,
haad-dm-base,
haad-dm,
ad-audiomp2-base,
ad-audiomp2
Branch point for: nick-hppapmap
Changes since 1.3: +10 -11
lines
Diff to previous 1.3 (colored) to selected 1.7.6.1 (colored)
Make this compile again: don't use USBDEVNAME(). While I'm here, use device_t, device_private(), aprint_error_dev().
Revision 1.2.8.1 / (download) - annotate - [select for diffs], Sun May 18 12:32:23 2008 UTC (15 years, 11 months ago) by yamt
Branch: yamt-pf42
Changes since 1.2: +2 -9
lines
Diff to previous 1.2 (colored) to selected 1.7.6.1 (colored)
sync with head.
Revision 1.2.10.1 / (download) - annotate - [select for diffs], Fri May 16 02:22:48 2008 UTC (15 years, 11 months ago) by yamt
Branch: yamt-nfs-mp
Changes since 1.2: +2 -9
lines
Diff to previous 1.2 (colored) to selected 1.7.6.1 (colored)
sync with head.
Revision 1.3 / (download) - annotate - [select for diffs], Mon Apr 28 20:23:27 2008 UTC (15 years, 11 months ago) by martin
Branch: MAIN
CVS Tags: yamt-pf42-base2,
yamt-nfs-mp-base2,
hpcarm-cleanup-nbase
Branch point for: wrstuden-revivesa
Changes since 1.2: +2 -9
lines
Diff to previous 1.2 (colored) to selected 1.7.6.1 (colored)
Remove clause 3 and 4 from TNF licenses
Revision 1.1.20.3 / (download) - annotate - [select for diffs], Mon Jan 21 09:37:29 2008 UTC (16 years, 3 months ago) by yamt
Branch: yamt-lazymbuf
Changes since 1.1.20.2: +7 -7
lines
Diff to previous 1.1.20.2 (colored) to branchpoint 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
sync with head
Revision 1.1.18.1 / (download) - annotate - [select for diffs], Wed Jan 9 01:47:12 2008 UTC (16 years, 3 months ago) by matt
Branch: matt-armv6
Changes since 1.1: +7 -7
lines
Diff to previous 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
sync with HEAD
Revision 1.1.32.1 / (download) - annotate - [select for diffs], Wed Jan 2 21:48:39 2008 UTC (16 years, 3 months ago) by bouyer
Branch: bouyer-xeni386
CVS Tags: bouyer-xeni386-merge1
Changes since 1.1: +7 -7
lines
Diff to previous 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
Sync with HEAD
Revision 1.1.28.1 / (download) - annotate - [select for diffs], Wed Dec 26 19:42:31 2007 UTC (16 years, 3 months ago) by ad
Branch: vmlocking2
Changes since 1.1: +7 -7
lines
Diff to previous 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
Sync with head.
Revision 1.2 / (download) - annotate - [select for diffs], Sat Dec 15 00:39:21 2007 UTC (16 years, 4 months ago) by perry
Branch: MAIN
CVS Tags: yamt-pf42-baseX,
yamt-pf42-base,
yamt-nfs-mp-base,
yamt-lazymbuf-base15,
yamt-lazymbuf-base14,
vmlocking2-base3,
nick-net80211-sync-base,
nick-net80211-sync,
mjf-devfs-base,
matt-armv6-nbase,
matt-armv6-base,
keiichi-mipv6-nbase,
keiichi-mipv6-base,
keiichi-mipv6,
hpcarm-cleanup-base,
bouyer-xeni386-nbase,
bouyer-xeni386-base,
ad-socklock-base1
Branch point for: yamt-pf42,
yamt-nfs-mp,
mjf-devfs2
Changes since 1.1: +7 -7
lines
Diff to previous 1.1 (colored) to selected 1.7.6.1 (colored)
__FUNCTION__ -> __func__
Revision 1.1.20.2 / (download) - annotate - [select for diffs], Mon Sep 3 14:27:47 2007 UTC (16 years, 7 months ago) by yamt
Branch: yamt-lazymbuf
Changes since 1.1.20.1: +1777 -0
lines
Diff to previous 1.1.20.1 (colored) to branchpoint 1.1 (colored) to selected 1.7.6.1 (colored)
sync with head.
Revision 1.1.8.2 / (download) - annotate - [select for diffs], Sat Jun 9 21:36:54 2007 UTC (16 years, 10 months ago) by ad
Branch: vmlocking
Changes since 1.1.8.1: +1777 -0
lines
Diff to previous 1.1.8.1 (colored) to branchpoint 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
Sync with head.
Revision 1.1.2.2 / (download) - annotate - [select for diffs], Sat Mar 24 14:54:51 2007 UTC (17 years, 1 month ago) by yamt
Branch: yamt-idlelwp
Changes since 1.1.2.1: +1777 -0
lines
Diff to previous 1.1.2.1 (colored) to branchpoint 1.1 (colored) next main 1.2 (colored) to selected 1.7.6.1 (colored)
sync with head.
Revision 1.1.20.1, Tue Mar 20 08:52:01 2007 UTC (17 years, 1 month ago) by yamt
Branch: yamt-lazymbuf
Changes since 1.1: +0 -1777
lines
FILE REMOVED
file ahci.c was added on branch yamt-lazymbuf on 2007-09-03 14:27:47 +0000
Revision 1.1.8.1, Tue Mar 20 08:52:01 2007 UTC (17 years, 1 month ago) by ad
Branch: vmlocking
Changes since 1.1: +0 -1777
lines
FILE REMOVED
file ahci.c was added on branch vmlocking on 2007-06-09 21:36:54 +0000
Revision 1.1.2.1, Tue Mar 20 08:52:01 2007 UTC (17 years, 1 month ago) by yamt
Branch: yamt-idlelwp
Changes since 1.1: +0 -1777
lines
FILE REMOVED
file ahci.c was added on branch yamt-idlelwp on 2007-03-24 14:54:51 +0000
Revision 1.1 / (download) - annotate - [select for diffs], Tue Mar 20 08:52:01 2007 UTC (17 years, 1 month ago) by dyoung
Branch: MAIN
CVS Tags: yamt-x86pmap-base4,
yamt-x86pmap-base3,
yamt-x86pmap-base2,
yamt-x86pmap-base,
yamt-x86pmap,
yamt-kmem-base3,
yamt-kmem-base2,
yamt-kmem-base,
yamt-kmem,
yamt-idlelwp-base8,
vmlocking2-base2,
vmlocking2-base1,
vmlocking-nbase,
vmlocking-base,
thorpej-atomic-base,
thorpej-atomic,
reinoud-bufcleanup-nbase,
reinoud-bufcleanup-base,
ppcoea-renovation-base,
ppcoea-renovation,
nick-csl-alignment-base5,
nick-csl-alignment-base,
nick-csl-alignment,
mjf-ufs-trans-base,
mjf-devfs,
matt-mips64-base,
matt-mips64,
matt-armv6-prevmlocking,
jmcneill-pm-base,
jmcneill-pm,
jmcneill-base,
hpcarm-cleanup,
cube-autoconf-base,
cube-autoconf,
bouyer-xenamd64-base2,
bouyer-xenamd64-base,
bouyer-xenamd64
Branch point for: yamt-lazymbuf,
yamt-idlelwp,
vmlocking2,
vmlocking,
matt-armv6,
bouyer-xeni386
Diff to selected 1.7.6.1 (colored)
Add a port to the Infineon ADM5120. Basics: the ADM5120 is a 175 MHz MIPS32 4Kc processor featuring a 6-port ethernet 10/100 switch with Auto MDI/X, a PCI controller, USB 1.1 controller, UART, watchdog timer, eight GPIO pins, and a multiport memory controller with both NOR and NAND flash support. This code supports most of the devices on the ADM5120, including the 6-port switch (each port attaches as an ethernet, admsw0 through admsw5), the PCI controller, USB controller, GPIO, watchdog, and UART. Remaining work: the port includes no NOR/NAND flash drivers. No bootloader is included. I have only tested the PCI bus driver with the use of one PCI slot on the RouterBOARD 153. It is not possible to exploit the capabilities of the ethernet switch using bridge(4). I have only netbooted the ADM5120 on the RB153. Booting other boards, and booting from flash memory, remains to be done. Hardware availability: many low-cost routers, including the RouterBOARD 100 series at RouterBOARD.com, use the Infineon ADM5120 processor. Credits: Ruslan Ermilov and Vsevolod Lobko ported to the ADM5120, and they wrote device drivers for the UART, USB controller, and 10/100 switch. Matt Isaacs brought the port up-to-date with NetBSD-current, made it compile, and ran it first on the RB153. I added drivers for the PCI controller, GPIO, and watchdog timer. I produced the bus attachment for the CompactFlash slot with advice from Mikrotik technical support and from Matt Thomas.