[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.96 and 1.104

version 1.96, 2012/02/24 08:06:07 version 1.104, 2013/06/22 15:13:55
Line 163  __KERNEL_RCSID(0, "$NetBSD$");
Line 163  __KERNEL_RCSID(0, "$NetBSD$");
 /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */  /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */
 #include <dev/isa/isareg.h>  #include <dev/isa/isareg.h>
   
   #ifndef XEN
   #define _RELOC(x)       ((x) - KERNBASE)
   #else
   #define _RELOC(x)       ((x))
   #endif /* XEN */
   #define RELOC(x)        _RELOC(_C_LABEL(x))
   
 #ifdef XEN  #ifdef XEN
 /*  /*
  * Xen guest identifier and loader selection   * Xen guest identifier and loader selection
  */   */
 .section __xen_guest  .section __xen_guest
         .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"          .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
 #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)  
         .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */          .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
         .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */          .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */
 #else  
         .ascii  ",VIRT_BASE=0xc0100000" /* KERNTEXTOFF */  
         .ascii  ",ELF_PADDR_OFFSET=0xc0100000" /* KERNTEXTOFF */  
 #endif  
         .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */          .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */
 #if !defined(XEN_COMPAT_030001)  
         .ascii  ",HYPERCALL_PAGE=0x00000101"          .ascii  ",HYPERCALL_PAGE=0x00000101"
                 /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */                  /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */
 #endif  
 #ifdef PAE  #ifdef PAE
         .ascii  ",PAE=yes[extended-cr3]"          .ascii  ",PAE=yes[extended-cr3]"
 #endif  #endif
Line 196  __KERNEL_RCSID(0, "$NetBSD$");
Line 196  __KERNEL_RCSID(0, "$NetBSD$");
  */   */
         .data          .data
   
         .globl  _C_LABEL(cpu)          .globl  _C_LABEL(cputype)
         .globl  _C_LABEL(cpuid_level)          .globl  _C_LABEL(cpuid_level)
         .globl  _C_LABEL(esym)          .globl  _C_LABEL(esym)
         .globl  _C_LABEL(eblob)          .globl  _C_LABEL(eblob)
         .globl  _C_LABEL(atdevbase)          .globl  _C_LABEL(atdevbase)
         .globl  _C_LABEL(lwp0uarea),_C_LABEL(PDPpaddr)          .globl  _C_LABEL(lwp0uarea)
           .globl  _C_LABEL(PDPpaddr)
         .globl  _C_LABEL(gdt)          .globl  _C_LABEL(gdt)
         .globl  _C_LABEL(idt)          .globl  _C_LABEL(idt)
         .globl  _C_LABEL(lapic_tpr)          .globl  _C_LABEL(lapic_tpr)
Line 213  __KERNEL_RCSID(0, "$NetBSD$");
Line 214  __KERNEL_RCSID(0, "$NetBSD$");
         .align  12          .align  12
 #endif  #endif
         .globl _C_LABEL(local_apic), _C_LABEL(lapic_id)          .globl _C_LABEL(local_apic), _C_LABEL(lapic_id)
 _C_LABEL(local_apic):          .type   _C_LABEL(local_apic), @object
   LABEL(local_apic)
         .space  LAPIC_ID          .space  LAPIC_ID
 _C_LABEL(lapic_id):  END(local_apic)
           .type   _C_LABEL(lapic_id), @object
   LABEL(lapic_id)
         .long   0x00000000          .long   0x00000000
         .space  LAPIC_TPRI-(LAPIC_ID+4)          .space  LAPIC_TPRI-(LAPIC_ID+4)
 _C_LABEL(lapic_tpr):  END(lapic_id)
           .type   _C_LABEL(lapic_tpr), @object
   LABEL(lapic_tpr)
         .space  LAPIC_PPRI-LAPIC_TPRI          .space  LAPIC_PPRI-LAPIC_TPRI
   END(lapic_tpr)
           .type   _C_LABEL(lapic_ppr), @object
 _C_LABEL(lapic_ppr):  _C_LABEL(lapic_ppr):
         .space  LAPIC_ISR-LAPIC_PPRI          .space  LAPIC_ISR-LAPIC_PPRI
   END(lapic_ppr)
           .type   _C_LABEL(lapic_isr), @object
 _C_LABEL(lapic_isr):  _C_LABEL(lapic_isr):
         .space  PAGE_SIZE-LAPIC_ISR          .space  PAGE_SIZE-LAPIC_ISR
   END(lapic_isr)
 #else  #else
 _C_LABEL(lapic_tpr):          .type   _C_LABEL(lapic_tpr), @object
   LABEL(lapic_tpr)
         .long 0          .long 0
   END(lapic_tpr)
 #endif  #endif
           .type   _C_LABEL(cputype), @object
 _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..  LABEL(cputype)          .long   0       # are we 80486, Pentium, or..
 _C_LABEL(cpuid_level):  .long   0  END(cputype)
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual          .type   _C_LABEL(cpuid_level), @object
 _C_LABEL(lwp0uarea):    .long   0  LABEL(cpuid_level)      .long   0
 _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm  END(cpuid_level)
           .type   _C_LABEL(atdevbase), @object
   LABEL(atdevbase)        .long   0       # location of start of iomem in virtual
   END(atdevbase)
           .type   _C_LABEL(lwp0uarea), @object
   LABEL(lwp0uarea)        .long   0
   END(lwp0uarea)
           .type   _C_LABEL(PDPpaddr), @object
   LABEL(PDPpaddr)         .long   0       # paddr of PDP, for libkvm
   END(PDPpaddr)
           .type   _C_LABEL(tablesize), @object
 _C_LABEL(tablesize):    .long   0  _C_LABEL(tablesize):    .long   0
   END(tablesize)
           .size   tmpstk, tmpstk - .
         .space 512          .space 512
 tmpstk:  tmpstk:
 #ifdef XEN  #ifdef XEN
         .align          PAGE_SIZE, 0x0  # Align on page boundary          .align          PAGE_SIZE, 0x0  # Align on page boundary
 _C_LABEL(tmpgdt):  LABEL(tmpgdt)
         .space          PAGE_SIZE       # Xen expects a page          .space          PAGE_SIZE       # Xen expects a page
   END(tmpgdt)
 #endif /* XEN */  #endif /* XEN */
         .globl tmpgdt  
 #ifndef XEN  
 #define _RELOC(x)       ((x) - KERNBASE)  
 #else  
 #define _RELOC(x)       ((x))  
 #endif /* XEN */  
 #define RELOC(x)        _RELOC(_C_LABEL(x))  
   
         .text          .text
         .globl  _C_LABEL(kernel_text)          .globl  _C_LABEL(kernel_text)
         .set    _C_LABEL(kernel_text),KERNTEXTOFF          .set    _C_LABEL(kernel_text),KERNTEXTOFF
   
         .globl  start  ENTRY(start)
 #ifndef XEN  #ifndef XEN
 start:  movw    $0x1234,0x472                   # warm boot          movw    $0x1234,0x472                   # warm boot
   
 #if defined(MULTIBOOT)  #if defined(MULTIBOOT)
         jmp     1f          jmp     1f
   
Line 346  isnx586:
Line 363  isnx586:
          * Don't try cpuid, as Nx586s reportedly don't support the           * Don't try cpuid, as Nx586s reportedly don't support the
          * PSL_ID bit.           * PSL_ID bit.
          */           */
         movl    $CPU_NX586,RELOC(cpu)          movl    $CPU_NX586,RELOC(cputype)
         jmp     2f          jmp     2f
   
 is386:  is386:
         movl    $CPU_386,RELOC(cpu)          movl    $CPU_386,RELOC(cputype)
         jmp     2f          jmp     2f
   
 try486: /* Try to toggle identification flag; does not exist on early 486s. */  try486: /* Try to toggle identification flag; does not exist on early 486s. */
Line 369  try486: /* Try to toggle identification 
Line 386  try486: /* Try to toggle identification 
   
         testl   %eax,%eax          testl   %eax,%eax
         jnz     try586          jnz     try586
 is486:  movl    $CPU_486,RELOC(cpu)  is486:  movl    $CPU_486,RELOC(cputype)
         /*          /*
          * Check Cyrix CPU           * Check Cyrix CPU
          * Cyrix CPUs do not change the undefined flags following           * Cyrix CPUs do not change the undefined flags following
Line 387  is486: movl $CPU_486,RELOC(cpu)
Line 404  is486: movl $CPU_486,RELOC(cpu)
         popfl          popfl
         jmp 2f          jmp 2f
 trycyrix486:  trycyrix486:
         movl    $CPU_6x86,RELOC(cpu)    # set CPU type          movl    $CPU_6x86,RELOC(cputype)        # set CPU type
         /*          /*
          * Check for Cyrix 486 CPU by seeing if the flags change during a           * Check for Cyrix 486 CPU by seeing if the flags change during a
          * divide. This is documented in the Cx486SLC/e SMM Programmer's           * divide. This is documented in the Cx486SLC/e SMM Programmer's
Line 405  trycyrix486:
Line 422  trycyrix486:
         xorl    %ecx,%eax               # are the flags different?          xorl    %ecx,%eax               # are the flags different?
         testl   $0x8d5,%eax             # only check C|PF|AF|Z|N|V          testl   $0x8d5,%eax             # only check C|PF|AF|Z|N|V
         jne     2f                      # yes; must be Cyrix 6x86 CPU          jne     2f                      # yes; must be Cyrix 6x86 CPU
         movl    $CPU_486DLC,RELOC(cpu)  # set CPU type          movl    $CPU_486DLC,RELOC(cputype)      # set CPU type
   
 #ifndef CYRIX_CACHE_WORKS  #ifndef CYRIX_CACHE_WORKS
         /* Disable caching of the ISA hole only. */          /* Disable caching of the ISA hole only. */
Line 682  try586: /* Use the `cpuid' instruction. 
Line 699  try586: /* Use the `cpuid' instruction. 
          */           */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_WP|CR0_AM),%eax
         movl    %eax,%cr0               # and page NOW!          movl    %eax,%cr0               # and page NOW!
   
         pushl   $begin                  # jump to high mem          pushl   $begin                  # jump to high mem
Line 759  begin:
Line 776  begin:
   
         call    _C_LABEL(main)          call    _C_LABEL(main)
 #else /* XEN */  #else /* XEN */
 start:  
         /* First, reset the PSL. */          /* First, reset the PSL. */
         pushl   $PSL_MBO          pushl   $PSL_MBO
         popfl          popfl
Line 823  start:
Line 839  start:
         call    _C_LABEL(init386)       # wire 386 chip for unix operation          call    _C_LABEL(init386)       # wire 386 chip for unix operation
         addl    $PDE_SIZE,%esp          # pop paddr_t          addl    $PDE_SIZE,%esp          # pop paddr_t
         call    _C_LABEL(main)          call    _C_LABEL(main)
   #endif /* defined(XEN) */
   END(start)
   
 #if defined(XEN) && !defined(XEN_COMPAT_030001)  #if defined(XEN)
 /* space for the hypercall call page */  /* space for the hypercall call page */
 #define HYPERCALL_PAGE_OFFSET 0x1000  #define HYPERCALL_PAGE_OFFSET 0x1000
 .org HYPERCALL_PAGE_OFFSET  .org HYPERCALL_PAGE_OFFSET
 ENTRY(hypercall_page)  ENTRY(hypercall_page)
 .skip 0x1000  .skip 0x1000
 #endif /* defined(XEN) && !defined(XEN_COMPAT_030001) */  END(hypercall_page)
   
 /*  /*
  * void lgdt_finish(void);   * void lgdt_finish(void);
Line 1013  ENTRY(cpu_switchto)
Line 1031  ENTRY(cpu_switchto)
         pushl   %edi          pushl   %edi
         call    _C_LABEL(i386_switch_context)          call    _C_LABEL(i386_switch_context)
         addl    $4,%esp          addl    $4,%esp
 #else /* XEN */  #else /* !XEN */
         /* Switch ring0 esp */          /* Switch ring0 esp */
         movl    PCB_ESP0(%ebx),%eax          movl    PCB_ESP0(%ebx),%eax
         movl    %eax,CPUVAR(ESP0)          movl    %eax,CPUVAR(ESP0)
   #endif /* !XEN */
   
         /* Don't bother with the rest if switching to a system process. */          /* Don't bother with the rest if switching to a system process. */
         testl   $LW_SYSTEM,L_FLAG(%edi)          testl   $LW_SYSTEM,L_FLAG(%edi)
         jnz     4f          jnz     4f
   
   #ifndef XEN
         /* Restore thread-private %fs/%gs descriptors. */          /* Restore thread-private %fs/%gs descriptors. */
         movl    CPUVAR(GDT),%ecx          movl    CPUVAR(GDT),%ecx
         movl    PCB_FSD(%ebx), %eax          movl    PCB_FSD(%ebx), %eax
Line 1032  ENTRY(cpu_switchto)
Line 1052  ENTRY(cpu_switchto)
         movl    PCB_GSD+4(%ebx), %edx          movl    PCB_GSD+4(%ebx), %edx
         movl    %eax, (GUGS_SEL*8)(%ecx)          movl    %eax, (GUGS_SEL*8)(%ecx)
         movl    %edx, (GUGS_SEL*8+4)(%ecx)          movl    %edx, (GUGS_SEL*8+4)(%ecx)
 #endif /* XEN */  #endif /* !XEN */
   
         /* Switch I/O bitmap */          /* Switch I/O bitmap */
         movl    PCB_IOMAP(%ebx),%eax          movl    PCB_IOMAP(%ebx),%eax
Line 1052  ENTRY(cpu_switchto)
Line 1072  ENTRY(cpu_switchto)
          * is deferred until mi_switch(), when cpu_switchto() returns.           * is deferred until mi_switch(), when cpu_switchto() returns.
          */           */
 2:  2:
 #ifndef XEN  #ifdef XEN
           pushl   %edi
           call    _C_LABEL(i386_tls_switch)
           addl    $4,%esp
   #else /* !XEN */
         movl    $IPL_HIGH,CPUVAR(ILEVEL)          movl    $IPL_HIGH,CPUVAR(ILEVEL)
         movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */          movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */
         movl    %cr0,%edx          movl    %cr0,%edx
Line 1069  ENTRY(cpu_switchto)
Line 1093  ENTRY(cpu_switchto)
 3:      cmpl    %edx,%ecx  3:      cmpl    %edx,%ecx
         je      4f          je      4f
         movl    %ecx,%cr0          movl    %ecx,%cr0
 #endif /* XEN */  #endif /* !XEN */
   
         /* Return to the new LWP, returning 'oldlwp' in %eax. */          /* Return to the new LWP, returning 'oldlwp' in %eax. */
 4:      movl    %esi,%eax  4:      movl    %esi,%eax
Line 1131  IDTVEC(osyscall)
Line 1155  IDTVEC(osyscall)
 #endif  #endif
         pushfl                  # set eflags in trap frame          pushfl                  # set eflags in trap frame
         popl    8(%esp)          popl    8(%esp)
         orl     $PSL_I,(%esp)   # re-enable ints on return to user          orl     $PSL_I,8(%esp)  # re-enable ints on return to user
         pushl   $7              # size of instruction for restart          pushl   $7              # size of instruction for restart
         jmp     syscall1          jmp     syscall1
 IDTVEC_END(osyscall)  IDTVEC_END(osyscall)

Legend:
Removed from v.1.96  
changed lines
  Added in v.1.104

CVSweb <webmaster@jp.NetBSD.org>