[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.95.10.3.2.1 and 1.101

version 1.95.10.3.2.1, 2017/08/08 11:59:16 version 1.101, 2012/06/27 00:37:08
Line 169  __KERNEL_RCSID(0, "$NetBSD$");
Line 169  __KERNEL_RCSID(0, "$NetBSD$");
  */   */
 .section __xen_guest  .section __xen_guest
         .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"          .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
 #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)  
         .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */          .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
         .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */          .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */
 #else  
         .ascii  ",VIRT_BASE=0xc0100000" /* KERNTEXTOFF */  
         .ascii  ",ELF_PADDR_OFFSET=0xc0100000" /* KERNTEXTOFF */  
 #endif  
         .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */          .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */
 #if !defined(XEN_COMPAT_030001)  
         .ascii  ",HYPERCALL_PAGE=0x00000101"          .ascii  ",HYPERCALL_PAGE=0x00000101"
                 /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */                  /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */
 #endif  
 #ifdef PAE  #ifdef PAE
         .ascii  ",PAE=yes[extended-cr3]"          .ascii  ",PAE=yes[extended-cr3]"
 #endif  #endif
Line 196  __KERNEL_RCSID(0, "$NetBSD$");
Line 189  __KERNEL_RCSID(0, "$NetBSD$");
  */   */
         .data          .data
   
         .globl  _C_LABEL(cpu)          .globl  _C_LABEL(cputype)
         .globl  _C_LABEL(cpuid_level)          .globl  _C_LABEL(cpuid_level)
         .globl  _C_LABEL(esym)          .globl  _C_LABEL(esym)
         .globl  _C_LABEL(eblob)          .globl  _C_LABEL(eblob)
Line 229  _C_LABEL(lapic_tpr):
Line 222  _C_LABEL(lapic_tpr):
         .long 0          .long 0
 #endif  #endif
   
 _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..  _C_LABEL(cputype):      .long   0       # are we 80486, Pentium, or..
 _C_LABEL(cpuid_level):  .long   0  _C_LABEL(cpuid_level):  .long   0
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(lwp0uarea):    .long   0  _C_LABEL(lwp0uarea):    .long   0
Line 238  _C_LABEL(tablesize): .long 0
Line 231  _C_LABEL(tablesize): .long 0
   
         .space 512          .space 512
 tmpstk:  tmpstk:
   #ifdef XEN
           .align          PAGE_SIZE, 0x0  # Align on page boundary
   _C_LABEL(tmpgdt):
           .space          PAGE_SIZE       # Xen expects a page
   #endif /* XEN */
           .globl tmpgdt
 #ifndef XEN  #ifndef XEN
 #define _RELOC(x)       ((x) - KERNBASE)  #define _RELOC(x)       ((x) - KERNBASE)
 #else  #else
Line 341  isnx586:
Line 339  isnx586:
          * Don't try cpuid, as Nx586s reportedly don't support the           * Don't try cpuid, as Nx586s reportedly don't support the
          * PSL_ID bit.           * PSL_ID bit.
          */           */
         movl    $CPU_NX586,RELOC(cpu)          movl    $CPU_NX586,RELOC(cputype)
         jmp     2f          jmp     2f
   
 is386:  is386:
         movl    $CPU_386,RELOC(cpu)          movl    $CPU_386,RELOC(cputype)
         jmp     2f          jmp     2f
   
 try486: /* Try to toggle identification flag; does not exist on early 486s. */  try486: /* Try to toggle identification flag; does not exist on early 486s. */
Line 364  try486: /* Try to toggle identification 
Line 362  try486: /* Try to toggle identification 
   
         testl   %eax,%eax          testl   %eax,%eax
         jnz     try586          jnz     try586
 is486:  movl    $CPU_486,RELOC(cpu)  is486:  movl    $CPU_486,RELOC(cputype)
         /*          /*
          * Check Cyrix CPU           * Check Cyrix CPU
          * Cyrix CPUs do not change the undefined flags following           * Cyrix CPUs do not change the undefined flags following
Line 382  is486: movl $CPU_486,RELOC(cpu)
Line 380  is486: movl $CPU_486,RELOC(cpu)
         popfl          popfl
         jmp 2f          jmp 2f
 trycyrix486:  trycyrix486:
         movl    $CPU_6x86,RELOC(cpu)    # set CPU type          movl    $CPU_6x86,RELOC(cputype)        # set CPU type
         /*          /*
          * Check for Cyrix 486 CPU by seeing if the flags change during a           * Check for Cyrix 486 CPU by seeing if the flags change during a
          * divide. This is documented in the Cx486SLC/e SMM Programmer's           * divide. This is documented in the Cx486SLC/e SMM Programmer's
Line 400  trycyrix486:
Line 398  trycyrix486:
         xorl    %ecx,%eax               # are the flags different?          xorl    %ecx,%eax               # are the flags different?
         testl   $0x8d5,%eax             # only check C|PF|AF|Z|N|V          testl   $0x8d5,%eax             # only check C|PF|AF|Z|N|V
         jne     2f                      # yes; must be Cyrix 6x86 CPU          jne     2f                      # yes; must be Cyrix 6x86 CPU
         movl    $CPU_486DLC,RELOC(cpu)  # set CPU type          movl    $CPU_486DLC,RELOC(cputype)      # set CPU type
   
 #ifndef CYRIX_CACHE_WORKS  #ifndef CYRIX_CACHE_WORKS
         /* Disable caching of the ISA hole only. */          /* Disable caching of the ISA hole only. */
Line 677  try586: /* Use the `cpuid' instruction. 
Line 675  try586: /* Use the `cpuid' instruction. 
          */           */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_AM),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_WP|CR0_AM),%eax
         movl    %eax,%cr0               # and page NOW!          movl    %eax,%cr0               # and page NOW!
   
         pushl   $begin                  # jump to high mem          pushl   $begin                  # jump to high mem
Line 787  start:
Line 785  start:
         cpuid          cpuid
         movl    %eax,RELOC(cpuid_level)          movl    %eax,RELOC(cpuid_level)
   
           /*
            * Use a temp page. We'll re- add it to uvm(9) once we're
            * done using it.
            */
           movl    $RELOC(tmpgdt), %eax
           pushl   %eax            # start of temporary gdt
           call    _C_LABEL(initgdt)
           addl    $4,%esp
   
         call    xen_pmap_bootstrap          call    xen_pmap_bootstrap
   
         /*          /*
Line 810  start:
Line 817  start:
         addl    $PDE_SIZE,%esp          # pop paddr_t          addl    $PDE_SIZE,%esp          # pop paddr_t
         call    _C_LABEL(main)          call    _C_LABEL(main)
   
 #if defined(XEN) && !defined(XEN_COMPAT_030001)  #if defined(XEN)
 /* space for the hypercall call page */  /* space for the hypercall call page */
 #define HYPERCALL_PAGE_OFFSET 0x1000  #define HYPERCALL_PAGE_OFFSET 0x1000
 .org HYPERCALL_PAGE_OFFSET  .org HYPERCALL_PAGE_OFFSET
 ENTRY(hypercall_page)  ENTRY(hypercall_page)
 .skip 0x1000  .skip 0x1000
 #endif /* defined(XEN) && !defined(XEN_COMPAT_030001) */  #endif /* defined(XEN) */
   
 /*  /*
  * void lgdt_finish(void);   * void lgdt_finish(void);
Line 1112  ENTRY(savectx)
Line 1119  ENTRY(savectx)
 END(savectx)  END(savectx)
   
 /*  /*
    * osyscall()
    *
    * Old call gate entry for syscall
    */
   IDTVEC(osyscall)
   #ifndef XEN
           /* XXX we are in trouble! interrupts be off here. */
           cli                     # must be first instruction
   #endif
           pushfl                  # set eflags in trap frame
           popl    8(%esp)
           orl     $PSL_I,(%esp)   # re-enable ints on return to user
           pushl   $7              # size of instruction for restart
           jmp     syscall1
   IDTVEC_END(osyscall)
   
   /*
  * syscall()   * syscall()
  *   *
  * Trap gate entry for syscall   * Trap gate entry for syscall
  */   */
 IDTVEC(syscall)  IDTVEC(syscall)
         pushl   $2              # size of instruction for restart          pushl   $2              # size of instruction for restart
   syscall1:
         pushl   $T_ASTFLT       # trap # for doing ASTs          pushl   $T_ASTFLT       # trap # for doing ASTs
         INTRENTRY          INTRENTRY
         STI(%eax)          STI(%eax)

Legend:
Removed from v.1.95.10.3.2.1  
changed lines
  Added in v.1.101

CVSweb <webmaster@jp.NetBSD.org>