[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.78 and 1.88

version 1.78, 2008/10/19 14:12:28 version 1.88, 2009/07/29 12:02:05
Line 71 
Line 71 
   
   
 /*-  /*-
  * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004, 2006, 2007, 2009 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
  *   *
  * This code is derived from software contributed to The NetBSD Foundation   * This code is derived from software contributed to The NetBSD Foundation
  * by Charles M. Hannum.   * by Charles M. Hannum, and by Andrew Doran.
  *   *
  * Redistribution and use in source and binary forms, with or without   * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions   * modification, are permitted provided that the following conditions
Line 138  __KERNEL_RCSID(0, "$NetBSD$");
Line 138  __KERNEL_RCSID(0, "$NetBSD$");
   
 #include "opt_compat_oldboot.h"  #include "opt_compat_oldboot.h"
 #include "opt_ddb.h"  #include "opt_ddb.h"
   #include "opt_modular.h"
 #include "opt_multiboot.h"  #include "opt_multiboot.h"
 #include "opt_realmem.h"  #include "opt_realmem.h"
 #include "opt_vm86.h"  #include "opt_vm86.h"
Line 172  __KERNEL_RCSID(0, "$NetBSD$");
Line 173  __KERNEL_RCSID(0, "$NetBSD$");
  * Xen guest identifier and loader selection   * Xen guest identifier and loader selection
  */   */
 .section __xen_guest  .section __xen_guest
 #ifdef XEN3  
         .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"          .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
 #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)  #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)
         .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */          .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
Line 189  __KERNEL_RCSID(0, "$NetBSD$");
Line 189  __KERNEL_RCSID(0, "$NetBSD$");
 #ifdef PAE  #ifdef PAE
         .ascii  ",PAE=yes[extended-cr3]"          .ascii  ",PAE=yes[extended-cr3]"
 #endif  #endif
 #else /* !XEN3 */  
         .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"  
 #endif /* XEN3 */  
         .ascii  ",LOADER=generic"          .ascii  ",LOADER=generic"
 #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)
         .ascii  ",BSD_SYMTAB=yes"          .ascii  ",BSD_SYMTAB=yes"
 #endif  #endif
         .byte   0          .byte   0
Line 517  try586: /* Use the `cpuid' instruction. 
Line 514  try586: /* Use the `cpuid' instruction. 
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
   
 #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)
         /* Save the symbols (if loaded). */          /* Save the symbols (if loaded). */
         movl    RELOC(esym),%eax          movl    RELOC(esym),%eax
         testl   %eax,%eax          testl   %eax,%eax
Line 726  start:
Line 723  start:
         popfl          popfl
   
         cld          cld
 #ifdef XEN3  
         movl    %esp, %ebx              # save start of available space          movl    %esp, %ebx              # save start of available space
 #else  
         movl    %esi,%ebx               # save start_info pointer  
 #endif  
         movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location          movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location
   
         /* Clear BSS first so that there are no surprises... */          /* Clear BSS first so that there are no surprises... */
Line 778  start:
Line 771  start:
         addl    $4,%esp          addl    $4,%esp
         call    _C_LABEL(main)          call    _C_LABEL(main)
   
 #if defined(XEN3) && !defined(XEN_COMPAT_030001)  #if defined(XEN) && !defined(XEN_COMPAT_030001)
 /* space for the hypercall call page */  /* space for the hypercall call page */
 #define HYPERCALL_PAGE_OFFSET 0x1000  #define HYPERCALL_PAGE_OFFSET 0x1000
 .org HYPERCALL_PAGE_OFFSET  .org HYPERCALL_PAGE_OFFSET
 ENTRY(hypercall_page)  ENTRY(hypercall_page)
 .skip 0x1000  .skip 0x1000
 #endif /* defined(XEN3) && !defined(XEN_COMPAT_030001) */  #endif /* defined(XEN) && !defined(XEN_COMPAT_030001) */
   
 /*  /*
  * void lgdt_finish(void);   * void lgdt_finish(void);
Line 910  ENTRY(dumpsys)
Line 903  ENTRY(dumpsys)
 END(dumpsys)  END(dumpsys)
   
 /*  /*
  * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp,   * struct lwp *cpu_switchto(struct lwp *oldlwp, struct *newlwp,
  *                          bool returning)   *                          bool returning)
  *   *
  *      1. if (oldlwp != NULL), save its context.   *      1. if (oldlwp != NULL), save its context.
Line 1008  ENTRY(cpu_switchto)
Line 1001  ENTRY(cpu_switchto)
 2:  2:
 #ifndef XEN  #ifndef XEN
         movl    $IPL_IPI,CPUVAR(ILEVEL)          movl    $IPL_IPI,CPUVAR(ILEVEL)
         movl    PCB_CR0(%ebx),%ecx          movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */
         movl    %cr0,%edx          movl    %cr0,%edx
   
         /*          /*
          * If our floating point registers are on a different CPU,           * If our floating point registers are on a different CPU,
          * set CR0_TS so we'll trap rather than reuse bogus state.           * set CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%ebx),%eax          cmpl    CPUVAR(FPCURLWP),%edi
         cmpl    CPUVAR(SELF),%eax  
         je      3f          je      3f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
   
Line 1047  ENTRY(cpu_switchto)
Line 1039  ENTRY(cpu_switchto)
   
 .Lcopy_iobitmap:  .Lcopy_iobitmap:
         /* Copy I/O bitmap. */          /* Copy I/O bitmap. */
           incl    _C_LABEL(pmap_iobmp_evcnt)+EV_COUNT
         movl    $(IOMAPSIZE/4),%ecx          movl    $(IOMAPSIZE/4),%ecx
         pushl   %esi          pushl   %esi
         pushl   %edi          pushl   %edi
Line 1079  END(savectx)
Line 1072  END(savectx)
  * Old call gate entry for syscall   * Old call gate entry for syscall
  */   */
 IDTVEC(osyscall)  IDTVEC(osyscall)
   #ifndef XEN
           /* XXX we are in trouble! interrupts be off here. */
           cli                     # must be first instruction
   #endif
         pushfl                  # set eflags in trap frame          pushfl                  # set eflags in trap frame
         popl    8(%esp)          popl    8(%esp)
           orl     $PSL_I,(%esp)   # re-enable ints on return to user
         pushl   $7              # size of instruction for restart          pushl   $7              # size of instruction for restart
         jmp     syscall1          jmp     syscall1
 IDTVEC_END(osyscall)  IDTVEC_END(osyscall)
Line 1095  IDTVEC(syscall)
Line 1093  IDTVEC(syscall)
 syscall1:  syscall1:
         pushl   $T_ASTFLT       # trap # for doing ASTs          pushl   $T_ASTFLT       # trap # for doing ASTs
         INTRENTRY          INTRENTRY
           STI(%eax)
 #ifdef DIAGNOSTIC  #ifdef DIAGNOSTIC
         movl    CPUVAR(ILEVEL),%ebx          movl    CPUVAR(ILEVEL),%ebx
         testl   %ebx,%ebx          testl   %ebx,%ebx
         jz      1f          jz      1f
         pushl   $5f          pushl   $5f
         call    _C_LABEL(printf)          call    _C_LABEL(panic)
         addl    $4,%esp          addl    $4,%esp
 #ifdef DDB  #ifdef DDB
         int     $3          int     $3
Line 1151  syscall1:
Line 1150  syscall1:
         INTRFASTEXIT          INTRFASTEXIT
 3:      STI(%eax)  3:      STI(%eax)
         pushl   $4f          pushl   $4f
         call    _C_LABEL(printf)          call    _C_LABEL(panic)
         addl    $4,%esp          addl    $4,%esp
         pushl   $IPL_NONE          pushl   $IPL_NONE
         call    _C_LABEL(spllower)          call    _C_LABEL(spllower)
         addl    $4,%esp          addl    $4,%esp
         jmp     .Lsyscall_checkast          jmp     .Lsyscall_checkast
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "SPL NOT ZERO ON SYSCALL ENTRY\n"
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
 9:  9:
         cmpl    $0, CPUVAR(WANT_PMAPLOAD)          cmpl    $0, CPUVAR(WANT_PMAPLOAD)
Line 1177  syscall1:
Line 1176  syscall1:
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
 IDTVEC_END(syscall)  IDTVEC_END(syscall)
   
   IDTVEC(svr4_fasttrap)
           pushl   $2              # size of instruction for restart
           pushl   $T_ASTFLT       # trap # for doing ASTs
           INTRENTRY
           STI(%eax)
           pushl   $RW_READER
           pushl   $_C_LABEL(svr4_fasttrap_lock)
           call    _C_LABEL(rw_enter)
           addl    $8,%esp
           call    *_C_LABEL(svr4_fasttrap_vec)
           pushl   $_C_LABEL(svr4_fasttrap_lock)
           call    _C_LABEL(rw_exit)
           addl    $4,%esp
   2:      /* Check for ASTs on exit to user mode. */
           cli
           CHECK_ASTPENDING(%eax)
           je      1f
           /* Always returning to user mode here. */
           CLEAR_ASTPENDING(%eax)
           sti
           /* Pushed T_ASTFLT into tf_trapno on entry. */
           pushl   %esp
           call    _C_LABEL(trap)
           addl    $4,%esp
           jmp     2b
   1:      CHECK_DEFERRED_SWITCH
           jnz     9f
           INTRFASTEXIT
   9:      sti
           call    _C_LABEL(pmap_load)
           cli
           jmp     2b
   
 #if NNPX > 0  #if NNPX > 0
 /*  /*
  * Special interrupt handlers.  Someday intr0-intr15 will be used to count   * Special interrupt handlers.  Someday intr0-intr15 will be used to count
Line 1241  ENTRY(sse2_idlezero_page)
Line 1273  ENTRY(sse2_idlezero_page)
         xorl    %eax, %eax          xorl    %eax, %eax
         .align  16          .align  16
 1:  1:
         cmpl    $0, CPUVAR(RESCHED)          testl   $RESCHED_KPREEMPT, CPUVAR(RESCHED)
         jnz     2f          jnz     2f
         movnti  %eax, 0(%edx)          movnti  %eax, 0(%edx)
         movnti  %eax, 4(%edx)          movnti  %eax, 4(%edx)
Legend:
Removed from v.1.78  
changed lines
  Added in v.1.88
CVSweb <webmaster@jp.NetBSD.org>