[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.73 and 1.87

version 1.73, 2008/05/11 14:44:54 version 1.87, 2009/05/04 11:47:29
Line 71 
Line 71 
   
   
 /*-  /*-
  * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004, 2006, 2007, 2009 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
  *   *
  * This code is derived from software contributed to The NetBSD Foundation   * This code is derived from software contributed to The NetBSD Foundation
  * by Charles M. Hannum.   * by Charles M. Hannum, and by Andrew Doran.
  *   *
  * Redistribution and use in source and binary forms, with or without   * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions   * modification, are permitted provided that the following conditions
Line 138  __KERNEL_RCSID(0, "$NetBSD$");
Line 138  __KERNEL_RCSID(0, "$NetBSD$");
   
 #include "opt_compat_oldboot.h"  #include "opt_compat_oldboot.h"
 #include "opt_ddb.h"  #include "opt_ddb.h"
   #include "opt_modular.h"
   #include "opt_multiboot.h"
 #include "opt_realmem.h"  #include "opt_realmem.h"
 #include "opt_vm86.h"  #include "opt_vm86.h"
 #include "opt_xen.h"  #include "opt_xen.h"
Line 192  __KERNEL_RCSID(0, "$NetBSD$");
Line 194  __KERNEL_RCSID(0, "$NetBSD$");
         .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"          .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"
 #endif /* XEN3 */  #endif /* XEN3 */
         .ascii  ",LOADER=generic"          .ascii  ",LOADER=generic"
 #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)
         .ascii  ",BSD_SYMTAB=yes"          .ascii  ",BSD_SYMTAB=yes"
 #endif  #endif
         .byte   0          .byte   0
Line 516  try586: /* Use the `cpuid' instruction. 
Line 518  try586: /* Use the `cpuid' instruction. 
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
   
 #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)
         /* Save the symbols (if loaded). */          /* Save the symbols (if loaded). */
         movl    RELOC(esym),%eax          movl    RELOC(esym),%eax
         testl   %eax,%eax          testl   %eax,%eax
Line 648  try586: /* Use the `cpuid' instruction. 
Line 650  try586: /* Use the `cpuid' instruction. 
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax
         movl    %eax,%cr0               # and let's page NOW!          movl    %eax,%cr0               # and page NOW!
   
         pushl   $begin                  # jump to high mem          pushl   $begin                  # jump to high mem
         ret          ret
Line 909  ENTRY(dumpsys)
Line 911  ENTRY(dumpsys)
 END(dumpsys)  END(dumpsys)
   
 /*  /*
  * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp,   * struct lwp *cpu_switchto(struct lwp *oldlwp, struct *newlwp,
  *                          bool returning)   *                          bool returning)
  *   *
  *      1. if (oldlwp != NULL), save its context.   *      1. if (oldlwp != NULL), save its context.
Line 927  ENTRY(cpu_switchto)
Line 929  ENTRY(cpu_switchto)
 #if defined(DIAGNOSTIC) && !defined(XEN)  #if defined(DIAGNOSTIC) && !defined(XEN)
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)          cmpl    $IPL_SCHED,CPUVAR(ILEVEL)
         jbe     0f          jbe     0f
           pushl   CPUVAR(ILEVEL)
         pushl   $.Lstr          pushl   $.Lstr
         call    _C_LABEL(panic)          call    _C_LABEL(panic)
         addl    $4,%esp          addl    $8,%esp
 .Lstr:  .string "cpu_switcho: switching above IPL_SCHED\0"  .Lstr:  .string "cpu_switchto: switching above IPL_SCHED (%d)\0"
 0:  0:
 #endif  #endif
   
Line 1006  ENTRY(cpu_switchto)
Line 1009  ENTRY(cpu_switchto)
 2:  2:
 #ifndef XEN  #ifndef XEN
         movl    $IPL_IPI,CPUVAR(ILEVEL)          movl    $IPL_IPI,CPUVAR(ILEVEL)
         movl    PCB_CR0(%ebx),%ecx          movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */
         movl    %cr0,%edx          movl    %cr0,%edx
   
         /*          /*
          * If our floating point registers are on a different CPU,           * If our floating point registers are on a different CPU,
          * set CR0_TS so we'll trap rather than reuse bogus state.           * set CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%ebx),%eax          cmpl    CPUVAR(FPCURLWP),%edi
         cmpl    CPUVAR(SELF),%eax  
         je      3f          je      3f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
   
Line 1045  ENTRY(cpu_switchto)
Line 1047  ENTRY(cpu_switchto)
   
 .Lcopy_iobitmap:  .Lcopy_iobitmap:
         /* Copy I/O bitmap. */          /* Copy I/O bitmap. */
           incl    _C_LABEL(pmap_iobmp_evcnt)+EV_COUNT
         movl    $(IOMAPSIZE/4),%ecx          movl    $(IOMAPSIZE/4),%ecx
         pushl   %esi          pushl   %esi
         pushl   %edi          pushl   %edi
Line 1077  END(savectx)
Line 1080  END(savectx)
  * Old call gate entry for syscall   * Old call gate entry for syscall
  */   */
 IDTVEC(osyscall)  IDTVEC(osyscall)
   #ifndef XEN
           /* XXX we are in trouble! interrupts be off here. */
           cli                     # must be first instruction
   #endif
         pushfl                  # set eflags in trap frame          pushfl                  # set eflags in trap frame
         popl    8(%esp)          popl    8(%esp)
           orl     $PSL_I,(%esp)   # re-enable ints on return to user
         pushl   $7              # size of instruction for restart          pushl   $7              # size of instruction for restart
         jmp     syscall1          jmp     syscall1
 IDTVEC_END(osyscall)  IDTVEC_END(osyscall)
Line 1093  IDTVEC(syscall)
Line 1101  IDTVEC(syscall)
 syscall1:  syscall1:
         pushl   $T_ASTFLT       # trap # for doing ASTs          pushl   $T_ASTFLT       # trap # for doing ASTs
         INTRENTRY          INTRENTRY
           STI(%eax)
 #ifdef DIAGNOSTIC  #ifdef DIAGNOSTIC
         movl    CPUVAR(ILEVEL),%ebx          movl    CPUVAR(ILEVEL),%ebx
         testl   %ebx,%ebx          testl   %ebx,%ebx
         jz      1f          jz      1f
         pushl   $5f          pushl   $5f
         call    _C_LABEL(printf)          call    _C_LABEL(panic)
         addl    $4,%esp          addl    $4,%esp
 #ifdef DDB  #ifdef DDB
         int     $3          int     $3
Line 1149  syscall1:
Line 1158  syscall1:
         INTRFASTEXIT          INTRFASTEXIT
 3:      STI(%eax)  3:      STI(%eax)
         pushl   $4f          pushl   $4f
         call    _C_LABEL(printf)          call    _C_LABEL(panic)
         addl    $4,%esp          addl    $4,%esp
         pushl   $IPL_NONE          pushl   $IPL_NONE
         call    _C_LABEL(spllower)          call    _C_LABEL(spllower)
         addl    $4,%esp          addl    $4,%esp
         jmp     .Lsyscall_checkast          jmp     .Lsyscall_checkast
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "SPL NOT ZERO ON SYSCALL ENTRY\n"
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
 9:  9:
         cmpl    $0, CPUVAR(WANT_PMAPLOAD)          cmpl    $0, CPUVAR(WANT_PMAPLOAD)
Line 1175  syscall1:
Line 1184  syscall1:
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
 IDTVEC_END(syscall)  IDTVEC_END(syscall)
   
   IDTVEC(svr4_fasttrap)
           pushl   $2              # size of instruction for restart
           pushl   $T_ASTFLT       # trap # for doing ASTs
           INTRENTRY
           STI(%eax)
           pushl   $RW_READER
           pushl   $_C_LABEL(svr4_fasttrap_lock)
           call    _C_LABEL(rw_enter)
           addl    $8,%esp
           call    *_C_LABEL(svr4_fasttrap_vec)
           pushl   $_C_LABEL(svr4_fasttrap_lock)
           call    _C_LABEL(rw_exit)
           addl    $4,%esp
   2:      /* Check for ASTs on exit to user mode. */
           cli
           CHECK_ASTPENDING(%eax)
           je      1f
           /* Always returning to user mode here. */
           CLEAR_ASTPENDING(%eax)
           sti
           /* Pushed T_ASTFLT into tf_trapno on entry. */
           pushl   %esp
           call    _C_LABEL(trap)
           addl    $4,%esp
           jmp     2b
   1:      CHECK_DEFERRED_SWITCH
           jnz     9f
           INTRFASTEXIT
   9:      sti
           call    _C_LABEL(pmap_load)
           cli
           jmp     2b
   
 #if NNPX > 0  #if NNPX > 0
 /*  /*
  * Special interrupt handlers.  Someday intr0-intr15 will be used to count   * Special interrupt handlers.  Someday intr0-intr15 will be used to count
Line 1226  END(npx586bug1)
Line 1268  END(npx586bug1)
 #endif /* NNPX > 0 */  #endif /* NNPX > 0 */
   
 /*  /*
  * void sse2_zero_page(void *pg)   * void sse2_idlezero_page(void *pg)
  *   *
  * Zero a page without polluting the cache.   * Zero a page without polluting the cache.  Preemption must be
    * disabled by the caller. Abort if a preemption is pending.
  */   */
 ENTRY(sse2_zero_page)  ENTRY(sse2_idlezero_page)
         pushl   %ebp          pushl   %ebp
         movl    %esp,%ebp          movl    %esp,%ebp
         movl    8(%esp), %edx          movl    8(%esp), %edx
         movl    $PAGE_SIZE, %ecx          movl    $(PAGE_SIZE/32), %ecx
         xorl    %eax, %eax          xorl    %eax, %eax
         .align  16          .align  16
 1:  1:
           testl   $RESCHED_KPREEMPT, CPUVAR(RESCHED)
           jnz     2f
         movnti  %eax, 0(%edx)          movnti  %eax, 0(%edx)
         movnti  %eax, 4(%edx)          movnti  %eax, 4(%edx)
         movnti  %eax, 8(%edx)          movnti  %eax, 8(%edx)
Line 1246  ENTRY(sse2_zero_page)
Line 1291  ENTRY(sse2_zero_page)
         movnti  %eax, 20(%edx)          movnti  %eax, 20(%edx)
         movnti  %eax, 24(%edx)          movnti  %eax, 24(%edx)
         movnti  %eax, 28(%edx)          movnti  %eax, 28(%edx)
         subl    $32, %ecx          addl    $32, %edx
         leal    32(%edx), %edx          decl    %ecx
         jnz     1b          jnz     1b
         sfence          sfence
           incl    %eax
         pop     %ebp          pop     %ebp
         ret          ret
 END(sse2_zero_page)  2:
   
 /*  
  * void sse2_copy_page(void *src, void *dst)  
  *  
  * Copy a page without polluting the cache.  
  */  
 ENTRY(sse2_copy_page)  
         pushl   %ebp  
         pushl   %ebx  
         pushl   %esi  
         pushl   %edi  
         movl    20(%esp), %esi  
         movl    24(%esp), %edi  
         movl    $PAGE_SIZE, %ebp  
         .align  16  
 1:  
         movl    0(%esi), %eax  
         movl    4(%esi), %ebx  
         movl    8(%esi), %ecx  
         movl    12(%esi), %edx  
         movnti  %eax, 0(%edi)  
         movnti  %ebx, 4(%edi)  
         movnti  %ecx, 8(%edi)  
         movnti  %edx, 12(%edi)  
         subl    $16, %ebp  
         leal    16(%esi), %esi  
         leal    16(%edi), %edi  
         jnz     1b  
         sfence          sfence
         popl    %edi  
         popl    %esi  
         popl    %ebx  
         popl    %ebp          popl    %ebp
         ret          ret
 END(sse2_copy_page)  END(sse2_idlezero_page)

Legend:
Removed from v.1.73  
changed lines
  Added in v.1.87

CVSweb <webmaster@jp.NetBSD.org>