[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.78.2.3 and 1.95.10.2

version 1.78.2.3, 2009/04/28 07:34:08 version 1.95.10.2, 2012/04/20 23:32:14
Line 15 
Line 15 
  * 2. Redistributions in binary form must reproduce the above copyright   * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the   *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.   *    documentation and/or other materials provided with the distribution.
  * 3. All advertising materials mentioning features or use of this software  
  *    must display the following acknowledgement:  
  *      This product includes software developed by Manuel Bouyer.  
  * 4. The name of the author may not be used to endorse or promote products  
  *    derived from this software without specific prior written permission.  
  *   *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR   * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES   * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
Line 173  __KERNEL_RCSID(0, "$NetBSD$");
Line 168  __KERNEL_RCSID(0, "$NetBSD$");
  * Xen guest identifier and loader selection   * Xen guest identifier and loader selection
  */   */
 .section __xen_guest  .section __xen_guest
 #ifdef XEN3  
         .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"          .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
 #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)  #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)
         .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */          .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
Line 190  __KERNEL_RCSID(0, "$NetBSD$");
Line 184  __KERNEL_RCSID(0, "$NetBSD$");
 #ifdef PAE  #ifdef PAE
         .ascii  ",PAE=yes[extended-cr3]"          .ascii  ",PAE=yes[extended-cr3]"
 #endif  #endif
 #else /* !XEN3 */  
         .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"  
 #endif /* XEN3 */  
         .ascii  ",LOADER=generic"          .ascii  ",LOADER=generic"
 #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE)
         .ascii  ",BSD_SYMTAB=yes"          .ascii  ",BSD_SYMTAB=yes"
Line 210  __KERNEL_RCSID(0, "$NetBSD$");
Line 201  __KERNEL_RCSID(0, "$NetBSD$");
         .globl  _C_LABEL(esym)          .globl  _C_LABEL(esym)
         .globl  _C_LABEL(eblob)          .globl  _C_LABEL(eblob)
         .globl  _C_LABEL(atdevbase)          .globl  _C_LABEL(atdevbase)
         .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)          .globl  _C_LABEL(lwp0uarea),_C_LABEL(PDPpaddr)
         .globl  _C_LABEL(gdt)          .globl  _C_LABEL(gdt)
         .globl  _C_LABEL(idt)          .globl  _C_LABEL(idt)
         .globl  _C_LABEL(lapic_tpr)          .globl  _C_LABEL(lapic_tpr)
Line 241  _C_LABEL(lapic_tpr):
Line 232  _C_LABEL(lapic_tpr):
 _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..  _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..
 _C_LABEL(cpuid_level):  .long   0  _C_LABEL(cpuid_level):  .long   0
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(proc0uarea):   .long   0  _C_LABEL(lwp0uarea):    .long   0
 _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm  _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm
 _C_LABEL(tablesize):    .long   0  _C_LABEL(tablesize):    .long   0
   
Line 491  try586: /* Use the `cpuid' instruction. 
Line 482  try586: /* Use the `cpuid' instruction. 
         movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location          movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location
   
 /*  /*
  * Virtual address space of kernel:   * Virtual address space of kernel, without PAE. The page dir is 1 page long.
  *   *
  * text | data | bss | [syms] | [blobs] | page dir | proc0 kstack | L1 ptp   * text | data | bss | [syms] | [blobs] | page dir | proc0 kstack | L1 ptp
  *                                      0          1       2      3   *                                      0          1       2      3
    *
    * Virtual address space of kernel, with PAE. We need 4 pages for the page dir
    * and 1 page for the L3.
    * text | data | bss | [syms] | [blobs] | L3 | page dir | proc0 kstack | L1 ptp
    *                                      0    1          5       6      7
  */   */
   #ifndef PAE
 #define PROC0_PDIR_OFF  0  #define PROC0_PDIR_OFF  0
 #define PROC0_STK_OFF   (PROC0_PDIR_OFF + PAGE_SIZE)  #else
   #define PROC0_L3_OFF    0
   #define PROC0_PDIR_OFF  1 * PAGE_SIZE
   #endif
   
   #define PROC0_STK_OFF   (PROC0_PDIR_OFF + PDP_SIZE * PAGE_SIZE)
 #define PROC0_PTP1_OFF  (PROC0_STK_OFF + UPAGES * PAGE_SIZE)  #define PROC0_PTP1_OFF  (PROC0_STK_OFF + UPAGES * PAGE_SIZE)
   
 /*  /*
  * fillkpt   * fillkpt - Fill in a kernel page table
  *      eax = pte (page frame | control | status)   *      eax = pte (page frame | control | status)
  *      ebx = page table address   *      ebx = page table address
  *      ecx = number of pages to map   *      ecx = number of pages to map
    *
    * For PAE, each entry is 8 bytes long: we must set the 4 upper bytes to 0.
    * This is done by the first instruction of fillkpt. In the non-PAE case, this
    * instruction just clears the page table entry.
  */   */
   
 #define fillkpt \  #define fillkpt \
 1:      movl    %eax,(%ebx)     ;       /* store phys addr */ \  1:      movl    $0,(PDE_SIZE-4)(%ebx)   ;       /* clear bits */        \
         addl    $4,%ebx         ;       /* next pte/pde */ \          movl    %eax,(%ebx)             ;       /* store phys addr */   \
         addl    $PAGE_SIZE,%eax ;       /* next phys page */ \          addl    $PDE_SIZE,%ebx          ;       /* next pte/pde */      \
         loop    1b              ;  \          addl    $PAGE_SIZE,%eax         ;       /* next phys page */    \
           loop    1b                      ;
   
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
Line 547  try586: /* Use the `cpuid' instruction. 
Line 552  try586: /* Use the `cpuid' instruction. 
         incl    %eax            /* one more ptp for VAs stolen by bootstrap */          incl    %eax            /* one more ptp for VAs stolen by bootstrap */
 1:      movl    %eax,RELOC(nkptp)+1*4  1:      movl    %eax,RELOC(nkptp)+1*4
   
         /* tablesize = (1 + UPAGES + nkptp) << PGSHIFT; */          /* tablesize = (PDP_SIZE + UPAGES + nkptp) << PGSHIFT; */
         addl    $(1+UPAGES),%eax          addl    $(PDP_SIZE+UPAGES),%eax
   #ifdef PAE
           incl    %eax            /* one more page for the L3 PD */
           shll    $PGSHIFT+1,%eax /* PTP tables are twice larger with PAE */
   #else
         shll    $PGSHIFT,%eax          shll    $PGSHIFT,%eax
   #endif
         movl    %eax,RELOC(tablesize)          movl    %eax,RELOC(tablesize)
   
         /* ensure that nkptp covers bootstrap tables */          /* ensure that nkptp covers bootstrap tables */
Line 587  try586: /* Use the `cpuid' instruction. 
Line 597  try586: /* Use the `cpuid' instruction. 
          */           */
         movl    $_RELOC(KERNTEXTOFF),%eax          movl    $_RELOC(KERNTEXTOFF),%eax
         movl    %eax,%ecx          movl    %eax,%ecx
         shrl    $(PGSHIFT-2),%ecx       /* ((n >> PGSHIFT) << 2) for # pdes */          shrl    $(PGSHIFT-2),%ecx       /* ((n >> PGSHIFT) << 2) for # pdes */
   #ifdef PAE
           shll    $1,%ecx                 /* pdes are twice larger with PAE */
   #endif
         addl    %ecx,%ebx          addl    %ecx,%ebx
   
         /* Map the kernel text read-only. */          /* Map the kernel text read-only. */
Line 614  try586: /* Use the `cpuid' instruction. 
Line 627  try586: /* Use the `cpuid' instruction. 
  * Construct a page table directory.   * Construct a page table directory.
  */   */
         /* Set up top level entries for identity mapping */          /* Set up top level entries for identity mapping */
         leal    (PROC0_PDIR_OFF)(%esi),%ebx          leal    (PROC0_PDIR_OFF)(%esi),%ebx
         leal    (PROC0_PTP1_OFF)(%esi),%eax          leal    (PROC0_PTP1_OFF)(%esi),%eax
         orl     $(PG_V|PG_KW), %eax          orl     $(PG_V|PG_KW), %eax
         movl    RELOC(nkptp)+1*4,%ecx          movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Set up top level entries for actual kernel mapping */          /* Set up top level entries for actual kernel mapping */
         leal    (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*4)(%esi),%ebx          leal    (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*PDE_SIZE)(%esi),%ebx
         leal    (PROC0_PTP1_OFF)(%esi),%eax          leal    (PROC0_PTP1_OFF)(%esi),%eax
         orl     $(PG_V|PG_KW), %eax          orl     $(PG_V|PG_KW), %eax
         movl    RELOC(nkptp)+1*4,%ecx          movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Install a PDE recursively mapping page directory as a page table! */          /* Install a PDE recursively mapping page directory as a page table! */
         leal    (PROC0_PDIR_OFF + PDIR_SLOT_PTE*4)(%esi),%ebx          leal    (PROC0_PDIR_OFF + PDIR_SLOT_PTE*PDE_SIZE)(%esi),%ebx
         leal    (PROC0_PDIR_OFF)(%esi),%eax          leal    (PROC0_PDIR_OFF)(%esi),%eax
         orl     $(PG_V|PG_KW),%eax          orl     $(PG_V|PG_KW),%eax
         movl    %eax,(%ebx)          movl    $PDP_SIZE,%ecx
           fillkpt
   
   #ifdef PAE
           /* Fill in proc0 L3 page with entries pointing to the page dirs */
           leal    (PROC0_L3_OFF)(%esi),%ebx
           leal    (PROC0_PDIR_OFF)(%esi),%eax
           orl     $(PG_V),%eax
           movl    $PDP_SIZE,%ecx
           fillkpt
   
           /* Enable PAE mode */
           movl    %cr4,%eax
           orl     $CR4_PAE,%eax
           movl    %eax,%cr4
   #endif
   
         /* Save phys. addr of PDP, for libkvm. */          /* Save phys. addr of PDP, for libkvm. */
         movl    %esi,RELOC(PDPpaddr)          leal    (PROC0_PDIR_OFF)(%esi),%eax
           movl    %eax,RELOC(PDPpaddr)
   
         /*          /*
          * Startup checklist:           * Startup checklist:
          * 1. Load %cr3 with pointer to PDIR.           * 1. Load %cr3 with pointer to PDIR (or L3 PD page for PAE).
          */           */
         movl    %esi,%eax               # phys address of ptd in proc 0          movl    %esi,%eax               # phys address of ptd in proc 0
         movl    %eax,%cr3               # load ptd addr into mmu          movl    %eax,%cr3               # load ptd addr into mmu
   
         /*          /*
          * 2. Enable paging and the rest of it.           * 2. Enable paging and the rest of it.
          */           */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_AM),%eax
         movl    %eax,%cr0               # and page NOW!          movl    %eax,%cr0               # and page NOW!
   
         pushl   $begin                  # jump to high mem          pushl   $begin                  # jump to high mem
Line 662  begin:
Line 690  begin:
          * memory, remove it.           * memory, remove it.
          */           */
         movl    _C_LABEL(nkptp)+1*4,%ecx          movl    _C_LABEL(nkptp)+1*4,%ecx
         leal    (PROC0_PDIR_OFF)(%esi),%ebx     # old, phys  address of PDIR          leal    (PROC0_PDIR_OFF)(%esi),%ebx     # old, phys address of PDIR
         addl    $(KERNBASE), %ebx       # new, virtual address of PDIR          addl    $(KERNBASE), %ebx               # new, virtual address of PDIR
 1:      movl    $0,(%ebx)  1:      movl    $0,(PDE_SIZE-4)(%ebx)           # Upper bits (for PAE)
         addl    $4,%ebx          movl    $0,(%ebx)
           addl    $PDE_SIZE,%ebx
         loop    1b          loop    1b
   
         /* Relocate atdevbase. */          /* Relocate atdevbase. */
Line 676  begin:
Line 705  begin:
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (PROC0_STK_OFF+KERNBASE)(%esi),%eax          leal    (PROC0_STK_OFF+KERNBASE)(%esi),%eax
         movl    %eax,_C_LABEL(proc0uarea)          movl    %eax,_C_LABEL(lwp0uarea)
         leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
         movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3          movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3
         xorl    %ebp,%ebp               # mark end of frames          xorl    %ebp,%ebp               # mark end of frames
Line 697  begin:
Line 726  begin:
         movl    _C_LABEL(tablesize),%eax          movl    _C_LABEL(tablesize),%eax
         addl    %esi,%eax               # skip past stack and page tables          addl    %esi,%eax               # skip past stack and page tables
   
   #ifdef PAE
           pushl   $0      # init386() expects a 64 bits paddr_t with PAE
   #endif
         pushl   %eax          pushl   %eax
         call    _C_LABEL(init386)       # wire 386 chip for unix operation          call    _C_LABEL(init386)       # wire 386 chip for unix operation
         addl    $4+NGDT*8,%esp          # pop temporary gdt          addl    $PDE_SIZE,%esp          # pop paddr_t
           addl    $NGDT*8,%esp            # pop temporary gdt
   
 #ifdef SAFARI_FIFO_HACK  #ifdef SAFARI_FIFO_HACK
         movb    $5,%al          movb    $5,%al
Line 727  start:
Line 760  start:
         popfl          popfl
   
         cld          cld
 #ifdef XEN3  
         movl    %esp, %ebx              # save start of available space          movl    %esp, %ebx              # save start of available space
 #else  
         movl    %esi,%ebx               # save start_info pointer  
 #endif  
         movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location          movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location
   
         /* Clear BSS first so that there are no surprises... */          /* Clear BSS first so that there are no surprises... */
Line 759  start:
Line 788  start:
         movl    %eax,RELOC(cpuid_level)          movl    %eax,RELOC(cpuid_level)
   
         call    xen_pmap_bootstrap          call    xen_pmap_bootstrap
   
         /*          /*
          * First avail returned by xen_pmap_bootstrap in %eax           * First avail returned by xen_pmap_bootstrap in %eax
          */           */
         movl    %eax, %esi;          movl    %eax, %esi;
         movl    %esi, _C_LABEL(proc0uarea)          movl    %esi, _C_LABEL(lwp0uarea)
   
 #define PROC0PDIR       ((0)              * PAGE_SIZE)  
 #define PROC0STACK      ((1)              * PAGE_SIZE)  
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
Line 774  start:
Line 801  start:
   
         addl    $USPACE, %esi          addl    $USPACE, %esi
         subl    $KERNBASE, %esi         #init386 want a physical address          subl    $KERNBASE, %esi         #init386 want a physical address
   
   #ifdef PAE
           pushl   $0      # init386() expects a 64 bits paddr_t with PAE
   #endif
         pushl   %esi          pushl   %esi
         call    _C_LABEL(init386)       # wire 386 chip for unix operation          call    _C_LABEL(init386)       # wire 386 chip for unix operation
         addl    $4,%esp          addl    $PDE_SIZE,%esp          # pop paddr_t
         call    _C_LABEL(main)          call    _C_LABEL(main)
   
 #if defined(XEN3) && !defined(XEN_COMPAT_030001)  #if defined(XEN) && !defined(XEN_COMPAT_030001)
 /* space for the hypercall call page */  /* space for the hypercall call page */
 #define HYPERCALL_PAGE_OFFSET 0x1000  #define HYPERCALL_PAGE_OFFSET 0x1000
 .org HYPERCALL_PAGE_OFFSET  .org HYPERCALL_PAGE_OFFSET
 ENTRY(hypercall_page)  ENTRY(hypercall_page)
 .skip 0x1000  .skip 0x1000
 #endif /* defined(XEN3) && !defined(XEN_COMPAT_030001) */  #endif /* defined(XEN) && !defined(XEN_COMPAT_030001) */
   
 /*  /*
  * void lgdt_finish(void);   * void lgdt_finish(void);
Line 944  ENTRY(cpu_switchto)
Line 975  ENTRY(cpu_switchto)
         jz      1f          jz      1f
   
         /* Save old context. */          /* Save old context. */
         movl    L_ADDR(%esi),%eax          movl    L_PCB(%esi),%eax
         movl    %esp,PCB_ESP(%eax)          movl    %esp,PCB_ESP(%eax)
         movl    %ebp,PCB_EBP(%eax)          movl    %ebp,PCB_EBP(%eax)
   
         /* Switch to newlwp's stack. */          /* Switch to newlwp's stack. */
 1:      movl    L_ADDR(%edi),%ebx  1:      movl    L_PCB(%edi),%ebx
         movl    PCB_EBP(%ebx),%ebp          movl    PCB_EBP(%ebx),%ebp
         movl    PCB_ESP(%ebx),%esp          movl    PCB_ESP(%ebx),%esp
   
Line 968  ENTRY(cpu_switchto)
Line 999  ENTRY(cpu_switchto)
         pushl   %edi          pushl   %edi
         call    _C_LABEL(i386_switch_context)          call    _C_LABEL(i386_switch_context)
         addl    $4,%esp          addl    $4,%esp
 #else /* XEN */  #else /* !XEN */
         /* Switch ring0 esp */          /* Switch ring0 esp */
         movl    PCB_ESP0(%ebx),%eax          movl    PCB_ESP0(%ebx),%eax
         movl    %eax,CPUVAR(ESP0)          movl    %eax,CPUVAR(ESP0)
   #endif /* !XEN */
   
         /* Don't bother with the rest if switching to a system process. */          /* Don't bother with the rest if switching to a system process. */
         testl   $LW_SYSTEM,L_FLAG(%edi)          testl   $LW_SYSTEM,L_FLAG(%edi)
         jnz     4f          jnz     4f
   
   #ifndef XEN
         /* Restore thread-private %fs/%gs descriptors. */          /* Restore thread-private %fs/%gs descriptors. */
         movl    CPUVAR(GDT),%ecx          movl    CPUVAR(GDT),%ecx
         movl    PCB_FSD(%ebx), %eax          movl    PCB_FSD(%ebx), %eax
Line 987  ENTRY(cpu_switchto)
Line 1020  ENTRY(cpu_switchto)
         movl    PCB_GSD+4(%ebx), %edx          movl    PCB_GSD+4(%ebx), %edx
         movl    %eax, (GUGS_SEL*8)(%ecx)          movl    %eax, (GUGS_SEL*8)(%ecx)
         movl    %edx, (GUGS_SEL*8+4)(%ecx)          movl    %edx, (GUGS_SEL*8+4)(%ecx)
 #endif /* XEN */  #endif /* !XEN */
   
         /* Switch I/O bitmap */          /* Switch I/O bitmap */
         movl    PCB_IOMAP(%ebx),%eax          movl    PCB_IOMAP(%ebx),%eax
         orl     %eax,%eax          orl     %eax,%eax
         jnz,pn  .Lcopy_iobitmap          jnz     .Lcopy_iobitmap
         movl    $(IOMAP_INVALOFF << 16),CPUVAR(IOBASE)          movl    $(IOMAP_INVALOFF << 16),CPUVAR(IOBASE)
 .Liobitmap_done:  .Liobitmap_done:
   
Line 1002  ENTRY(cpu_switchto)
Line 1035  ENTRY(cpu_switchto)
         jne     5f          jne     5f
   
         /*          /*
          * Restore cr0 (including FPU state).  Raise the IPL to IPL_IPI.           * Restore cr0 (including FPU state).  Raise the IPL to IPL_HIGH.
          * FPU IPIs can alter the LWP's saved cr0.  Dropping the priority           * FPU IPIs can alter the LWP's saved cr0.  Dropping the priority
          * is deferred until mi_switch(), when cpu_switchto() returns.           * is deferred until mi_switch(), when cpu_switchto() returns.
          */           */
 2:  2:
 #ifndef XEN  #ifdef XEN
         movl    $IPL_IPI,CPUVAR(ILEVEL)          pushl   %edi
           call    _C_LABEL(i386_tls_switch)
           addl    $4,%esp
   #else /* !XEN */
           movl    $IPL_HIGH,CPUVAR(ILEVEL)
         movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */          movl    PCB_CR0(%ebx),%ecx              /* has CR0_TS clear */
         movl    %cr0,%edx          movl    %cr0,%edx
   
Line 1024  ENTRY(cpu_switchto)
Line 1061  ENTRY(cpu_switchto)
 3:      cmpl    %edx,%ecx  3:      cmpl    %edx,%ecx
         je      4f          je      4f
         movl    %ecx,%cr0          movl    %ecx,%cr0
 #endif /* XEN */  #endif /* !XEN */
   
         /* Return to the new LWP, returning 'oldlwp' in %eax. */          /* Return to the new LWP, returning 'oldlwp' in %eax. */
 4:      movl    %esi,%eax  4:      movl    %esi,%eax
Line 1080  END(savectx)
Line 1117  END(savectx)
  * Old call gate entry for syscall   * Old call gate entry for syscall
  */   */
 IDTVEC(osyscall)  IDTVEC(osyscall)
   #ifndef XEN
           /* XXX we are in trouble! interrupts be off here. */
         cli                     # must be first instruction          cli                     # must be first instruction
   #endif
         pushfl                  # set eflags in trap frame          pushfl                  # set eflags in trap frame
         popl    8(%esp)          popl    8(%esp)
         orl     $PSL_I,(%esp)   # re-enable ints on return to user          orl     $PSL_I,(%esp)   # re-enable ints on return to user
Line 1111  syscall1:
Line 1151  syscall1:
 #endif  #endif
 1:  1:
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
         incl    CPUVAR(NSYSCALL)        # count it atomically          addl    $1,CPUVAR(NSYSCALL)     # count it atomically
           adcl    $0,CPUVAR(NSYSCALL)+4   # count it atomically
         movl    CPUVAR(CURLWP),%edi          movl    CPUVAR(CURLWP),%edi
         movl    L_PROC(%edi),%edx          movl    L_PROC(%edi),%edx
         movl    %esp,L_MD_REGS(%edi)    # save pointer to frame          movl    %esp,L_MD_REGS(%edi)    # save pointer to frame

Legend:
Removed from v.1.78.2.3  
changed lines
  Added in v.1.95.10.2

CVSweb <webmaster@jp.NetBSD.org>