[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.47 and 1.73

version 1.47, 2007/02/19 11:46:10 version 1.73, 2008/05/11 14:44:54
Line 1 
Line 1 
 /*      $NetBSD$        */  /*      $NetBSD$        */
   
   /*
    * Copyright-o-rama!
    */
   
   /*
    * Copyright (c) 2006 Manuel Bouyer.
    *
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions
    * are met:
    * 1. Redistributions of source code must retain the above copyright
    *    notice, this list of conditions and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright
    *    notice, this list of conditions and the following disclaimer in the
    *    documentation and/or other materials provided with the distribution.
    * 3. All advertising materials mentioning features or use of this software
    *    must display the following acknowledgement:
    *      This product includes software developed by Manuel Bouyer.
    * 4. The name of the author may not be used to endorse or promote products
    *    derived from this software without specific prior written permission.
    *
    * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
    * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
    * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
    * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
    * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
    * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
    * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
    * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    *
    */
   
   /*
    * Copyright (c) 2001 Wasabi Systems, Inc.
    * All rights reserved.
    *
    * Written by Frank van der Linden for Wasabi Systems, Inc.
    *
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions
    * are met:
    * 1. Redistributions of source code must retain the above copyright
    *    notice, this list of conditions and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright
    *    notice, this list of conditions and the following disclaimer in the
    *    documentation and/or other materials provided with the distribution.
    * 3. All advertising materials mentioning features or use of this software
    *    must display the following acknowledgement:
    *      This product includes software developed for the NetBSD Project by
    *      Wasabi Systems, Inc.
    * 4. The name of Wasabi Systems, Inc. may not be used to endorse
    *    or promote products derived from this software without specific prior
    *    written permission.
    *
    * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
    * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
    * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
    * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
    * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
    * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
    * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
    * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    * POSSIBILITY OF SUCH DAMAGE.
    */
   
   
 /*-  /*-
  * Copyright (c) 1998, 2000, 2004 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
  *   *
  * This code is derived from software contributed to The NetBSD Foundation   * This code is derived from software contributed to The NetBSD Foundation
Line 15 
Line 85 
  * 2. Redistributions in binary form must reproduce the above copyright   * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the   *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.   *    documentation and/or other materials provided with the distribution.
  * 3. All advertising materials mentioning features or use of this software  
  *    must display the following acknowledgement:  
  *        This product includes software developed by the NetBSD  
  *        Foundation, Inc. and its contributors.  
  * 4. Neither the name of The NetBSD Foundation nor the names of its  
  *    contributors may be used to endorse or promote products derived  
  *    from this software without specific prior written permission.  
  *   *
  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS   * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
Line 70 
Line 133 
  *      @(#)locore.s    7.3 (Berkeley) 5/13/91   *      @(#)locore.s    7.3 (Berkeley) 5/13/91
  */   */
   
 #include "opt_compat_netbsd.h"  #include <machine/asm.h>
   __KERNEL_RCSID(0, "$NetBSD$");
   
 #include "opt_compat_oldboot.h"  #include "opt_compat_oldboot.h"
 #include "opt_cputype.h"  
 #include "opt_ddb.h"  #include "opt_ddb.h"
 #include "opt_ipkdb.h"  
 #include "opt_lockdebug.h"  
 #include "opt_multiprocessor.h"  
 #include "opt_realmem.h"  #include "opt_realmem.h"
 #include "opt_user_ldt.h"  
 #include "opt_vm86.h"  #include "opt_vm86.h"
   #include "opt_xen.h"
   
 #include "npx.h"  #include "npx.h"
 #include "assym.h"  #include "assym.h"
Line 94 
Line 155 
 #include <machine/segments.h>  #include <machine/segments.h>
 #include <machine/specialreg.h>  #include <machine/specialreg.h>
 #include <machine/trap.h>  #include <machine/trap.h>
   
 #if NLAPIC > 0  
 #include <machine/i82489reg.h>  #include <machine/i82489reg.h>
 #endif  #include <machine/frameasm.h>
   #include <machine/i82489reg.h>
   #ifndef XEN
 #include <machine/multiboot.h>  #include <machine/multiboot.h>
   
 /* LINTSTUB: include <sys/types.h> */  
 /* LINTSTUB: include <machine/cpu.h> */  
 /* LINTSTUB: include <sys/systm.h> */  
   
 #include <machine/asm.h>  
   
 #if defined(MULTIPROCESSOR)  
   
 #define SET_CURLWP(lwp,cpu)                             \  
         movl    CPUVAR(SELF),cpu                ;       \  
         movl    lwp,CPUVAR(CURLWP)      ;       \  
         movl    cpu,L_CPU(lwp)  
   
 #else  
   
 #define SET_CURLWP(lwp,tcpu)            movl    lwp,CPUVAR(CURLWP)  
 #define GET_CURLWP(reg)                 movl    CPUVAR(CURLWP),reg  
   
 #endif  #endif
   
 #define SET_CURPCB(reg)                 movl    reg,CPUVAR(CURPCB)  
   
 #define CLEAR_RESCHED(reg)              movl    reg,CPUVAR(RESCHED)  
   
 /* XXX temporary kluge; these should not be here */  /* XXX temporary kluge; these should not be here */
 /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */  /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */
 #include <dev/isa/isareg.h>  #include <dev/isa/isareg.h>
   
   #ifdef XEN
 /* Disallow old names for REALBASEMEM */  /*
 #ifdef BIOSBASEMEM   * Xen guest identifier and loader selection
 #error BIOSBASEMEM option deprecated; use REALBASEMEM only if memory size reported by latest boot block is incorrect   */
 #endif  .section __xen_guest
   #ifdef XEN3
 /* Disallow old names for REALEXTMEM */          .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
 #ifdef EXTMEM_SIZE  #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)
 #error EXTMEM_SIZE option deprecated; use REALEXTMEM only if memory size reported by latest boot block is incorrect          .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
           .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */
   #else
           .ascii  ",VIRT_BASE=0xc0100000" /* KERNTEXTOFF */
           .ascii  ",ELF_PADDR_OFFSET=0xc0100000" /* KERNTEXTOFF */
 #endif  #endif
 #ifdef BIOSEXTMEM          .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */
 #error BIOSEXTMEM option deprecated; use REALEXTMEM only if memory size reported by latest boot block is incorrect  #if !defined(XEN_COMPAT_030001)
           .ascii  ",HYPERCALL_PAGE=0x00000101"
                   /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */
   #endif
   #ifdef PAE
           .ascii  ",PAE=yes[extended-cr3]"
   #endif
   #else /* !XEN3 */
           .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"
   #endif /* XEN3 */
           .ascii  ",LOADER=generic"
   #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)
           .ascii  ",BSD_SYMTAB=yes"
 #endif  #endif
           .byte   0
 #include <machine/frameasm.h>  
   
   
 #ifdef MULTIPROCESSOR  
 #include <machine/i82489reg.h>  
 #endif  #endif
   
 /*  /*
Line 156 
Line 204 
         .data          .data
   
         .globl  _C_LABEL(cpu)          .globl  _C_LABEL(cpu)
           .globl  _C_LABEL(cpuid_level)
         .globl  _C_LABEL(esym)          .globl  _C_LABEL(esym)
           .globl  _C_LABEL(eblob)
         .globl  _C_LABEL(atdevbase)          .globl  _C_LABEL(atdevbase)
         .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)          .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)
         .globl  _C_LABEL(gdt)          .globl  _C_LABEL(gdt)
 #ifdef I586_CPU  
         .globl  _C_LABEL(idt)          .globl  _C_LABEL(idt)
 #endif  
         .globl  _C_LABEL(lapic_tpr)          .globl  _C_LABEL(lapic_tpr)
   
 #if NLAPIC > 0  #if NLAPIC > 0
Line 188  _C_LABEL(lapic_tpr):
Line 236  _C_LABEL(lapic_tpr):
         .long 0          .long 0
 #endif  #endif
   
   _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..
 _C_LABEL(cpu):          .long   0       # are we 386, 386sx, or 486,  _C_LABEL(cpuid_level):  .long   0
                                         #   or Pentium, or..  
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(proc0uarea):   .long   0  _C_LABEL(proc0uarea):   .long   0
 _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm  _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm
   _C_LABEL(tablesize):    .long   0
   
         .space 512          .space 512
 tmpstk:  tmpstk:
   
   #ifndef XEN
 #define _RELOC(x)       ((x) - KERNBASE)  #define _RELOC(x)       ((x) - KERNBASE)
   #else
   #define _RELOC(x)       ((x))
   #endif /* XEN */
 #define RELOC(x)        _RELOC(_C_LABEL(x))  #define RELOC(x)        _RELOC(_C_LABEL(x))
   
         .text          .text
Line 207  tmpstk:
Line 258  tmpstk:
         .set    _C_LABEL(kernel_text),KERNTEXTOFF          .set    _C_LABEL(kernel_text),KERNTEXTOFF
   
         .globl  start          .globl  start
   #ifndef XEN
 start:  movw    $0x1234,0x472                   # warm boot  start:  movw    $0x1234,0x472                   # warm boot
   
 #if defined(MULTIBOOT)  #if defined(MULTIBOOT)
Line 259  _C_LABEL(Multiboot_Header):
Line 311  _C_LABEL(Multiboot_Header):
         movw    %ax,%fs          movw    %ax,%fs
         movw    %ax,%gs          movw    %ax,%gs
         decl    %eax          decl    %eax
         movl    %eax,RELOC(cpu_info_primary)+CPU_INFO_LEVEL          movl    %eax,RELOC(cpuid_level)
   
         /* Find out our CPU type. */          /* Find out our CPU type. */
   
Line 419  trycyrix486:
Line 471  trycyrix486:
 try586: /* Use the `cpuid' instruction. */  try586: /* Use the `cpuid' instruction. */
         xorl    %eax,%eax          xorl    %eax,%eax
         cpuid          cpuid
         movl    %eax,RELOC(cpu_info_primary)+CPU_INFO_LEVEL          movl    %eax,RELOC(cpuid_level)
   
 2:  2:
         /*          /*
Line 439  try586: /* Use the `cpuid' instruction. 
Line 491  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Virtual address space of kernel:   * Virtual address space of kernel:
  *   *
  * text | data | bss | [syms] | page dir | proc0 kstack   * text | data | bss | [syms] | [blobs] | page dir | proc0 kstack | L1 ptp
  *                            0          1       2      3   *                                      0          1       2      3
  */   */
 #define PROC0PDIR       ((0)              * PAGE_SIZE)  
 #define PROC0STACK      ((1)              * PAGE_SIZE)  #define PROC0_PDIR_OFF  0
 #define SYSMAP          ((1+UPAGES)       * PAGE_SIZE)  #define PROC0_STK_OFF   (PROC0_PDIR_OFF + PAGE_SIZE)
 #define TABLESIZE       ((1+UPAGES) * PAGE_SIZE) /* + nkpde * PAGE_SIZE */  #define PROC0_PTP1_OFF  (PROC0_STK_OFF + UPAGES * PAGE_SIZE)
   
   /*
    * fillkpt
    *      eax = pte (page frame | control | status)
    *      ebx = page table address
    *      ecx = number of pages to map
    */
   
   #define fillkpt \
   1:      movl    %eax,(%ebx)     ;       /* store phys addr */ \
           addl    $4,%ebx         ;       /* next pte/pde */ \
           addl    $PAGE_SIZE,%eax ;       /* next phys page */ \
           loop    1b              ;  \
   
   
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
   
 #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)
         /* Save the symbols (if loaded). */          /* Save the symbols (if loaded). */
         movl    RELOC(esym),%eax          movl    RELOC(esym),%eax
Line 459  try586: /* Use the `cpuid' instruction. 
Line 526  try586: /* Use the `cpuid' instruction. 
 1:  1:
 #endif  #endif
   
         /* Calculate where to start the bootstrap tables. */          /* Skip over any modules/blobs. */
         movl    %edi,%esi                       # edi = esym ? esym : end          movl    RELOC(eblob),%eax
           testl   %eax,%eax
           jz      1f
           subl    $KERNBASE,%eax
           movl    %eax,%edi
   1:
           /* Compute sizes */
           movl    %edi,%esi
         addl    $PGOFSET,%esi                   # page align up          addl    $PGOFSET,%esi                   # page align up
         andl    $~PGOFSET,%esi          andl    $~PGOFSET,%esi
   
         /*          /* nkptp[1] = (esi + ~L2_FRAME) >> L2_SHIFT + 1; */
          * Calculate the size of the kernel page table directory, and          movl    %esi,%eax
          * how many entries it will have.  Adjust nkpde to the actual          addl    $~L2_FRAME,%eax
          * kernel size automatically.  Account for the bootstrap tables,          shrl    $L2_SHIFT,%eax
          * round up, and add an extra 4MB.          incl    %eax            /* one more ptp for VAs stolen by bootstrap */
          */  1:      movl    %eax,RELOC(nkptp)+1*4
         leal    TABLESIZE+NBPD+PDOFSET(%edi),%eax  
         shrl    $PDSHIFT,%eax          /* tablesize = (1 + UPAGES + nkptp) << PGSHIFT; */
         movl    RELOC(nkpde),%ecx               # get nkpde          addl    $(1+UPAGES),%eax
         cmpl    %ecx,%eax          shll    $PGSHIFT,%eax
         jb      1f          movl    %eax,RELOC(tablesize)
         movl    %eax,%ecx  
 1:      cmpl    $NKPTP_MIN,%ecx                 # larger than min?          /* ensure that nkptp covers bootstrap tables */
         jge     1f          addl    %esi,%eax
         movl    $NKPTP_MIN,%ecx                 # set at min          addl    $~L2_FRAME,%eax
         jmp     2f          shrl    $L2_SHIFT,%eax
 1:      cmpl    $NKPTP_MAX,%ecx                 # larger than max?          incl    %eax
         jle     2f          cmpl    %eax,RELOC(nkptp)+1*4
         movl    $NKPTP_MAX,%ecx          jnz     1b
 2:      movl    %ecx,RELOC(nkpde)  
           /* Clear tables */
         /* Clear memory for bootstrap tables. */          movl    %esi,%edi
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                       # end of tables  
         subl    %edi,%ecx                       # size of tables  
         shrl    $2,%ecx  
         xorl    %eax,%eax          xorl    %eax,%eax
         cld          cld
           movl    RELOC(tablesize),%ecx
           shrl    $2,%ecx
         rep          rep
         stosl          stosl
   
 /*          leal    (PROC0_PTP1_OFF)(%esi), %ebx
  * fillkpt  
  *      eax = pte (page frame | control | status)  
  *      ebx = page table address  
  *      ecx = number of pages to map  
  */  
 #define fillkpt         \  
 1:      movl    %eax,(%ebx)     ; \  
         addl    $PAGE_SIZE,%eax ; /* increment physical address */ \  
         addl    $4,%ebx         ; /* next pte */ \  
         loop    1b              ;  
   
 /*  /*
  * Build initial page tables.   * Build initial page tables.
  */   */
         /* Calculate end of text segment, rounded to a page. */          /*
         leal    (RELOC(etext)+PGOFSET),%edx           * Compute &__data_start - KERNBASE. This can't be > 4G,
            * or we can't deal with it anyway, since we can't load it in
            * 32 bit mode. So use the bottom 32 bits.
            */
           movl    $RELOC(__data_start),%edx
         andl    $~PGOFSET,%edx          andl    $~PGOFSET,%edx
   
         /* Skip over the first 1MB. */          /*
            * Skip the first MB.
            */
         movl    $_RELOC(KERNTEXTOFF),%eax          movl    $_RELOC(KERNTEXTOFF),%eax
         movl    %eax,%ecx          movl    %eax,%ecx
         shrl    $PGSHIFT,%ecx          shrl    $(PGSHIFT-2),%ecx       /* ((n >> PGSHIFT) << 2) for # pdes */
         leal    (SYSMAP)(%esi,%ecx,4),%ebx          addl    %ecx,%ebx
   
         /* Map the kernel text read-only. */          /* Map the kernel text read-only. */
         movl    %edx,%ecx          movl    %edx,%ecx
Line 530  try586: /* Use the `cpuid' instruction. 
Line 597  try586: /* Use the `cpuid' instruction. 
   
         /* Map the data, BSS, and bootstrap tables read-write. */          /* Map the data, BSS, and bootstrap tables read-write. */
         leal    (PG_V|PG_KW)(%edx),%eax          leal    (PG_V|PG_KW)(%edx),%eax
         movl    RELOC(nkpde),%ecx          movl    RELOC(tablesize),%ecx
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                               # end of tables          addl    %esi,%ecx                               # end of tables
         subl    %edx,%ecx                               # subtract end of text          subl    %edx,%ecx                               # subtract end of text
         shrl    $PGSHIFT,%ecx          shrl    $PGSHIFT,%ecx
         fillkpt          fillkpt
   
         /* Map ISA I/O memory. */          /* Map ISA I/O mem (later atdevbase) */
         movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set          movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set
         movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,          movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,
         fillkpt          fillkpt
Line 546  try586: /* Use the `cpuid' instruction. 
Line 611  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Construct a page table directory.   * Construct a page table directory.
  */   */
         /* Install PDEs for temporary double map of kernel. */          /* Set up top level entries for identity mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF)(%esi),%ebx
         leal    (PROC0PDIR+0*4)(%esi),%ebx              # which is where temp maps!          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Map kernel PDEs. */          /* Set up top level entries for actual kernel mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*4)(%esi),%ebx
         leal    (PROC0PDIR+PDSLOT_KERN*4)(%esi),%ebx    # kernel pde offset          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Install a PDE recursively mapping page directory as a page table! */          /* Install a PDE recursively mapping page directory as a page table! */
         leal    (PROC0PDIR+PG_V|PG_KW)(%esi),%eax       # pte for ptd          leal    (PROC0_PDIR_OFF + PDIR_SLOT_PTE*4)(%esi),%ebx
         movl    %eax,(PROC0PDIR+PDSLOT_PTE*4)(%esi)     # recursive PD slot          leal    (PROC0_PDIR_OFF)(%esi),%eax
           orl     $(PG_V|PG_KW),%eax
           movl    %eax,(%ebx)
   
   
         /* Save phys. addr of PDP, for libkvm. */          /* Save phys. addr of PDP, for libkvm. */
         movl    %esi,RELOC(PDPpaddr)          movl    %esi,RELOC(PDPpaddr)
   
         /* Load base of page directory and enable mapping. */          /*
            * Startup checklist:
            * 1. Load %cr3 with pointer to PDIR.
            */
         movl    %esi,%eax               # phys address of ptd in proc 0          movl    %esi,%eax               # phys address of ptd in proc 0
         movl    %eax,%cr3               # load ptd addr into mmu          movl    %eax,%cr3               # load ptd addr into mmu
   
           /*
            * 2. Enable paging and the rest of it.
            */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax
Line 577  try586: /* Use the `cpuid' instruction. 
Line 654  try586: /* Use the `cpuid' instruction. 
         ret          ret
   
 begin:  begin:
         /* Now running relocated at KERNBASE.  Remove double mapping. */          /*
         movl    _C_LABEL(nkpde),%ecx            # for this many pde s,           * We have arrived.
         leal    (PROC0PDIR+0*4)(%esi),%ebx      # which is where temp maps!           * There's no need anymore for the identity mapping in low
         addl    $(KERNBASE), %ebx       # now use relocated address           * memory, remove it.
            */
           movl    _C_LABEL(nkptp)+1*4,%ecx
           leal    (PROC0_PDIR_OFF)(%esi),%ebx     # old, phys  address of PDIR
           addl    $(KERNBASE), %ebx       # new, virtual address of PDIR
 1:      movl    $0,(%ebx)  1:      movl    $0,(%ebx)
         addl    $4,%ebx # next pde          addl    $4,%ebx
         loop    1b          loop    1b
   
         /* Relocate atdevbase. */          /* Relocate atdevbase. */
         movl    _C_LABEL(nkpde),%edx          movl    $KERNBASE,%edx
         shll    $PGSHIFT,%edx          addl    _C_LABEL(tablesize),%edx
         addl    $(TABLESIZE+KERNBASE),%edx  
         addl    %esi,%edx          addl    %esi,%edx
         movl    %edx,_C_LABEL(atdevbase)          movl    %edx,_C_LABEL(atdevbase)
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (PROC0STACK+KERNBASE)(%esi),%eax          leal    (PROC0_STK_OFF+KERNBASE)(%esi),%eax
         movl    %eax,_C_LABEL(proc0uarea)          movl    %eax,_C_LABEL(proc0uarea)
         leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
         movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3          movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3
Line 612  begin:
Line 692  begin:
         call    _C_LABEL(initgdt)          call    _C_LABEL(initgdt)
         addl    $4,%esp          addl    $4,%esp
   
         movl    _C_LABEL(nkpde),%eax          movl    _C_LABEL(tablesize),%eax
         shll    $PGSHIFT,%eax  
         addl    $TABLESIZE,%eax  
         addl    %esi,%eax               # skip past stack and page tables          addl    %esi,%eax               # skip past stack and page tables
   
         pushl   %eax          pushl   %eax
Line 640  begin:
Line 718  begin:
 #endif /* SAFARI_FIFO_HACK */  #endif /* SAFARI_FIFO_HACK */
   
         call    _C_LABEL(main)          call    _C_LABEL(main)
   #else /* XEN */
   start:
           /* First, reset the PSL. */
           pushl   $PSL_MBO
           popfl
   
 /*          cld
  * void proc_trampoline(void);  #ifdef XEN3
  * This is a trampoline function pushed onto the stack of a newly created          movl    %esp, %ebx              # save start of available space
  * process in order to do some additional setup.  The trampoline is entered by  #else
  * cpu_switch()ing to the process, so we abuse the callee-saved registers used          movl    %esi,%ebx               # save start_info pointer
  * by cpu_switch() to store the information about the stub to call.  
  * NOTE: This function does not have a normal calling sequence!  
  */  
 /* LINTSTUB: Func: void proc_trampoline(void) */  
 NENTRY(proc_trampoline)  
 #ifdef MULTIPROCESSOR  
         call    _C_LABEL(proc_trampoline_mp)  
 #endif  #endif
         movl    $IPL_NONE,CPUVAR(ILEVEL)          movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location
         pushl   %ebx  
         call    *%esi  
         addl    $4,%esp  
         DO_DEFERRED_SWITCH(%eax)  
         INTRFASTEXIT  
         /* NOTREACHED */  
   
 /*****************************************************************************/          /* Clear BSS first so that there are no surprises... */
 #ifdef COMPAT_16          xorl    %eax,%eax
 /*          movl    $RELOC(__bss_start),%edi
  * Signal trampoline; copied to top of user stack.          movl    $RELOC(_end),%ecx
  */          subl    %edi,%ecx
 /* LINTSTUB: Var: char sigcode[1], esigcode[1]; */          rep stosb
 NENTRY(sigcode)  
           /* Copy the necessary stuff from start_info structure. */
           /* We need to copy shared_info early, so that sti/cli work */
           movl    $RELOC(start_info_union),%edi
           movl    $128,%ecx
           rep movsl
   
           /* Clear segment registers; always null in proc0. */
           xorl    %eax,%eax
           movw    %ax,%fs
           movw    %ax,%gs
           decl    %eax
           movl    %eax,RELOC(cpuid_level)
   
           xorl    %eax,%eax
           cpuid
           movl    %eax,RELOC(cpuid_level)
   
           call    xen_pmap_bootstrap
         /*          /*
          * Handler has returned here as if we called it.  The sigcontext           * First avail returned by xen_pmap_bootstrap in %eax
          * is on the stack after the 3 args "we" pushed.  
          */           */
         leal    12(%esp),%eax           # get pointer to sigcontext          movl    %eax, %esi;
         movl    %eax,4(%esp)            # put it in the argument slot          movl    %esi, _C_LABEL(proc0uarea)
                                         # fake return address already there  
         movl    $SYS_compat_16___sigreturn14,%eax  
         int     $0x80                   # enter kernel with args on stack  
         movl    $SYS_exit,%eax  
         int     $0x80                   # exit if sigreturn fails  
         .globl  _C_LABEL(esigcode)  
 _C_LABEL(esigcode):  
 #endif  
   
 /*****************************************************************************/  #define PROC0PDIR       ((0)              * PAGE_SIZE)
   #define PROC0STACK      ((1)              * PAGE_SIZE)
   
 /*          /* Set up bootstrap stack. */
  * The following is i386-specific nonsense.          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
  */          xorl    %ebp,%ebp               # mark end of frames
   
           addl    $USPACE, %esi
           subl    $KERNBASE, %esi         #init386 want a physical address
           pushl   %esi
           call    _C_LABEL(init386)       # wire 386 chip for unix operation
           addl    $4,%esp
           call    _C_LABEL(main)
   
   #if defined(XEN3) && !defined(XEN_COMPAT_030001)
   /* space for the hypercall call page */
   #define HYPERCALL_PAGE_OFFSET 0x1000
   .org HYPERCALL_PAGE_OFFSET
   ENTRY(hypercall_page)
   .skip 0x1000
   #endif /* defined(XEN3) && !defined(XEN_COMPAT_030001) */
   
 /*  /*
  * void lgdt(struct region_descriptor *rdp);   * void lgdt_finish(void);
  * Load a new GDT pointer (and do any necessary cleanup).   * Finish load a new GDT pointer (do any necessary cleanup).
  * XXX It's somewhat questionable whether reloading all the segment registers   * XXX It's somewhat questionable whether reloading all the segment registers
  * is necessary, since the actual descriptor data is not changed except by   * is necessary, since the actual descriptor data is not changed except by
  * process creation and exit, both of which clean up via task switches.  OTOH,   * process creation and exit, both of which clean up via task switches.  OTOH,
  * this only happens at run time when the GDT is resized.   * this only happens at run time when the GDT is resized.
  */   */
 /* LINTSTUB: Func: void lgdt(struct region_descriptor *rdp) */  /* LINTSTUB: Func: void lgdt_finish(void) */
 NENTRY(lgdt)  NENTRY(lgdt_finish)
         /* Reload the descriptor table. */  
         movl    4(%esp),%eax  
         lgdt    (%eax)  
         /* Flush the prefetch queue. */  
         jmp     1f  
         nop  
 1:      /* Reload "stale" selectors. */  
         movl    $GSEL(GDATA_SEL, SEL_KPL),%eax          movl    $GSEL(GDATA_SEL, SEL_KPL),%eax
         movw    %ax,%ds          movw    %ax,%ds
         movw    %ax,%es          movw    %ax,%es
Line 719  NENTRY(lgdt)
Line 807  NENTRY(lgdt)
         pushl   $GSEL(GCODE_SEL, SEL_KPL)          pushl   $GSEL(GCODE_SEL, SEL_KPL)
         pushl   %eax          pushl   %eax
         lret          lret
   END(lgdt_finish)
   
 NENTRY(x86_flush)  #endif /* XEN */
         /* Reload code selector by doing intersegment return. */  
         popl    %eax  
         pushl   $GSEL(GCODE_SEL, SEL_KPL)  
         pushl   %eax  
         lret  
   
 /*****************************************************************************/  /*
    * void lwp_trampoline(void);
    *
    * This is a trampoline function pushed onto the stack of a newly created
    * process in order to do some additional setup.  The trampoline is entered by
    * cpu_switch()ing to the process, so we abuse the callee-saved registers used
    * by cpu_switch() to store the information about the stub to call.
    * NOTE: This function does not have a normal calling sequence!
    */
   NENTRY(lwp_trampoline)
           movl    %ebp,%edi       /* for .Lsyscall_checkast */
           xorl    %ebp,%ebp
           pushl   %edi
           pushl   %eax
           call    _C_LABEL(lwp_startup)
           addl    $8,%esp
           pushl   %ebx
           call    *%esi
           addl    $4,%esp
           jmp     .Lsyscall_checkast
           /* NOTREACHED */
   END(lwp_trampoline)
   
 /*  /*
  * These functions are primarily used by DDB.   * sigcode()
    *
    * Signal trampoline; copied to top of user stack.  Used only for
    * compatibility with old releases of NetBSD.
  */   */
   NENTRY(sigcode)
           /*
            * Handler has returned here as if we called it.  The sigcontext
            * is on the stack after the 3 args "we" pushed.
            */
           leal    12(%esp),%eax           # get pointer to sigcontext
           movl    %eax,4(%esp)            # put it in the argument slot
                                           # fake return address already there
           movl    $SYS_compat_16___sigreturn14,%eax
           int     $0x80                   # enter kernel with args on stack
           movl    $SYS_exit,%eax
           int     $0x80                   # exit if sigreturn fails
           .globl  _C_LABEL(esigcode)
   _C_LABEL(esigcode):
   END(sigcode)
   
 /* LINTSTUB: Func: int setjmp (label_t *l) */  /*
    * int setjmp(label_t *)
    *
    * Used primarily by DDB.
    */
 ENTRY(setjmp)  ENTRY(setjmp)
         movl    4(%esp),%eax          movl    4(%esp),%eax
         movl    %ebx,(%eax)             # save ebx          movl    %ebx,(%eax)             # save ebx
Line 743  ENTRY(setjmp)
Line 870  ENTRY(setjmp)
         movl    %edi,16(%eax)           # save edi          movl    %edi,16(%eax)           # save edi
         movl    (%esp),%edx             # get rta          movl    (%esp),%edx             # get rta
         movl    %edx,20(%eax)           # save eip          movl    %edx,20(%eax)           # save eip
         xorl    %eax,%eax               # return (0);          xorl    %eax,%eax               # return 0
         ret          ret
   END(setjmp)
   
 /* LINTSTUB: Func: void longjmp (label_t *l) */  /*
    * int longjmp(label_t *)
    *
    * Used primarily by DDB.
    */
 ENTRY(longjmp)  ENTRY(longjmp)
         movl    4(%esp),%eax          movl    4(%esp),%eax
         movl    (%eax),%ebx             # restore ebx          movl    (%eax),%ebx             # restore ebx
Line 756  ENTRY(longjmp)
Line 888  ENTRY(longjmp)
         movl    16(%eax),%edi           # restore edi          movl    16(%eax),%edi           # restore edi
         movl    20(%eax),%edx           # get rta          movl    20(%eax),%edx           # get rta
         movl    %edx,(%esp)             # put in return frame          movl    %edx,(%esp)             # put in return frame
         xorl    %eax,%eax               # return (1);          movl    $1,%eax                 # return 1
         incl    %eax  
         ret          ret
   END(longjmp)
   
 /*****************************************************************************/  /*
    * void dumpsys(void)
         .globl  _C_LABEL(sched_whichqs),_C_LABEL(sched_qs)   *
         .globl  _C_LABEL(uvmexp),_C_LABEL(panic)   * Mimic cpu_switchto() for postmortem debugging.
    */
 #ifdef DIAGNOSTIC  ENTRY(dumpsys)
 NENTRY(switch_error)          pushl   %ebx                    # set up fake switchframe
         pushl   $1f          pushl   %esi                    #   and save context
         call    _C_LABEL(panic)          pushl   %edi
         /* NOTREACHED */          movl    %esp,_C_LABEL(dumppcb)+PCB_ESP
 1:      .asciz  "cpu_switch"          movl    %ebp,_C_LABEL(dumppcb)+PCB_EBP
 #endif /* DIAGNOSTIC */          call    _C_LABEL(dodumpsys)     # dump!
           addl    $(3*4), %esp            # unwind switchframe
           ret
   END(dumpsys)
   
 /*  /*
  * void cpu_switch(struct lwp *)   * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp,
  * Find a runnable lwp and switch to it.  Wait if necessary.  If the new   *                          bool returning)
  * lwp is the same as the old one, we short-circuit the context save and  
  * restore.  
  *   *
  * Note that the stack frame layout is known to "struct switchframe"   *      1. if (oldlwp != NULL), save its context.
  * in <machine/frame.h> and to the code in cpu_fork() which initializes   *      2. then, restore context of newlwp.
    *
    * Note that the stack frame layout is known to "struct switchframe" in
    * <machine/frame.h> and to the code in cpu_lwp_fork() which initializes
  * it for a new lwp.   * it for a new lwp.
  */   */
 ENTRY(cpu_switch)  ENTRY(cpu_switchto)
         pushl   %ebx          pushl   %ebx
         pushl   %esi          pushl   %esi
         pushl   %edi          pushl   %edi
   
 #ifdef DEBUG  #if defined(DIAGNOSTIC) && !defined(XEN)
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)          cmpl    $IPL_SCHED,CPUVAR(ILEVEL)
         jae     1f          jbe     0f
         pushl   $2f          pushl   $.Lstr
         call    _C_LABEL(panic)          call    _C_LABEL(panic)
         /* NOTREACHED */  
 2:      .asciz  "not splsched() in cpu_switch!"  
 1:  
 #endif /* DEBUG */  
   
         movl    16(%esp),%esi           # current  
   
         /*  
          * Clear curlwp so that we don't accumulate system time while idle.  
          * This also insures that schedcpu() will move the old lwp to  
          * the correct queue if it happens to get called from the spllower()  
          * below and changes the priority.  (See corresponding comment in  
          * userret()).  
          */  
         movl    $0,CPUVAR(CURLWP)  
         /*  
          * First phase: find new lwp.  
          *  
          * Registers:  
          *   %eax - queue head, scratch, then zero  
          *   %ebx - queue number  
          *   %ecx - cached value of whichqs  
          *   %edx - next lwp in queue  
          *   %esi - old lwp  
          *   %edi - new lwp  
          */  
   
         /* Look for new lwp. */  
         cli                             # splhigh doesn't do a cli  
         movl    _C_LABEL(sched_whichqs),%ecx  
         bsfl    %ecx,%ebx               # find a full q  
         jnz     switch_dequeue  
   
         /*  
          * idling:      save old context.  
          *  
          * Registers:  
          *   %eax, %ecx - scratch  
          *   %esi - old lwp, then old pcb  
          *   %edi - idle pcb  
          */  
   
         pushl   %esi  
         call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)  
         addl    $4,%esp          addl    $4,%esp
   .Lstr:  .string "cpu_switcho: switching above IPL_SCHED\0"
         movl    L_ADDR(%esi),%esi  0:
   
         /* Save stack pointers. */  
         movl    %esp,PCB_ESP(%esi)  
         movl    %ebp,PCB_EBP(%esi)  
   
         /* Find idle PCB for this CPU */  
 #ifndef MULTIPROCESSOR  
         movl    $_C_LABEL(lwp0),%ebx  
         movl    L_ADDR(%ebx),%edi  
         movl    L_MD_TSS_SEL(%ebx),%edx  
 #else  
         movl    CPUVAR(IDLE_PCB),%edi  
         movl    CPUVAR(IDLE_TSS_SEL),%edx  
 #endif  
         movl    $0,CPUVAR(CURLWP)               /* In case we fault... */  
   
         /* Restore the idle context (avoid interrupts) */  
         cli  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%edi),%esp  
         movl    PCB_EBP(%edi),%ebp  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  
         movl    %cr3,%eax  
         movl    %eax,PCB_CR3(%edi)  
 #ifdef MULTIPROCESSOR  
         movl    CPUVAR(GDT),%eax  
 #else  
         movl    _C_LABEL(gdt),%eax  
 #endif  #endif
         andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)  
         ltr     %dx  
   
         /* We're always in the kernel, so we don't need the LDT. */          movl    16(%esp),%esi           # oldlwp
           movl    20(%esp),%edi           # newlwp
         /* Restore cr0 (including FPU state). */          movl    24(%esp),%edx           # returning
         movl    PCB_CR0(%edi),%ecx          testl   %esi,%esi
         movl    %ecx,%cr0          jz      1f
   
         /* Record new pcb. */  
         SET_CURPCB(%edi)  
   
         xorl    %esi,%esi          /* Save old context. */
         sti          movl    L_ADDR(%esi),%eax
 idle_unlock:          movl    %esp,PCB_ESP(%eax)
         call    _C_LABEL(sched_unlock_idle)          movl    %ebp,PCB_EBP(%eax)
         /* Interrupts are okay again. */  
         pushl   $IPL_NONE               # spl0()          /* Switch to newlwp's stack. */
         call    _C_LABEL(spllower)      # process pending interrupts  1:      movl    L_ADDR(%edi),%ebx
         addl    $4,%esp          movl    PCB_EBP(%ebx),%ebp
         jmp     idle_start          movl    PCB_ESP(%ebx),%esp
 idle_zero:  
         sti  
         call    _C_LABEL(uvm_pageidlezero)  
         cli  
         cmpl    $0,_C_LABEL(sched_whichqs)  
         jnz     idle_exit  
 idle_loop:  
         /* Try to zero some pages. */  
         movl    _C_LABEL(uvm)+UVM_PAGE_IDLE_ZERO,%ecx  
         testl   %ecx,%ecx  
         jnz     idle_zero  
         sti  
         hlt  
 NENTRY(mpidle)  
 idle_start:  
         cli  
         cmpl    $0,_C_LABEL(sched_whichqs)  
         jz      idle_loop  
 idle_exit:  
         movl    $IPL_HIGH,CPUVAR(ILEVEL)                # splhigh  
         sti  
         call    _C_LABEL(sched_lock_idle)  
         movl    _C_LABEL(sched_whichqs),%ecx  
         bsfl    %ecx,%ebx  
         jz      idle_unlock  
   
 switch_dequeue:  
         /*          /*
          * we're running at splhigh(), but it's otherwise okay to take           * Set curlwp.  This must be globally visible in order to permit
          * interrupts here.           * non-interlocked mutex release.
          */           */
         sti          movl    %edi,%ecx
         leal    _C_LABEL(sched_qs)(,%ebx,8),%eax # select q          xchgl   %ecx,CPUVAR(CURLWP)
   
         movl    L_FORW(%eax),%edi       # unlink from front of process q          /* Skip the rest if returning to a pinned LWP. */
 #ifdef  DIAGNOSTIC          testl   %edx,%edx
         cmpl    %edi,%eax               # linked to self (i.e. nothing queued)?          jnz     4f
         je      _C_LABEL(switch_error)  # not possible  
 #endif /* DIAGNOSTIC */  
         movl    L_FORW(%edi),%edx  
         movl    %edx,L_FORW(%eax)  
         movl    %eax,L_BACK(%edx)  
   
         cmpl    %edx,%eax               # q empty?  #ifdef XEN
         jne     3f          pushl   %edi
           call    _C_LABEL(i386_switch_context)
         btrl    %ebx,%ecx               # yes, clear to indicate empty  
         movl    %ecx,_C_LABEL(sched_whichqs) # update q status  
   
 3:      /* We just did it. */  
         xorl    %eax,%eax  
         CLEAR_RESCHED(%eax)  
   
 switch_resume:  
 #ifdef  DIAGNOSTIC  
         cmpl    %eax,L_WCHAN(%edi)      # Waiting for something?  
         jne     _C_LABEL(switch_error)  # Yes; shouldn't be queued.  
         cmpb    $LSRUN,L_STAT(%edi)     # In run state?  
         jne     _C_LABEL(switch_error)  # No; shouldn't be queued.  
 #endif /* DIAGNOSTIC */  
   
         /* Isolate lwp.  XXX Is this necessary? */  
         movl    %eax,L_BACK(%edi)  
   
         /* Record new lwp. */  
         movb    $LSONPROC,L_STAT(%edi)  # l->l_stat = LSONPROC  
         SET_CURLWP(%edi,%ecx)  
   
         /* Skip context switch if same lwp. */  
         xorl    %ebx,%ebx  
         cmpl    %edi,%esi  
         je      switch_return  
   
         /* If old lwp exited, don't bother. */  
         testl   %esi,%esi  
         jz      switch_exited  
   
         /*  
          * Second phase: save old context.  
          *  
          * Registers:  
          *   %eax, %ecx - scratch  
          *   %esi - old lwp, then old pcb  
          *   %edi - new lwp  
          */  
   
         pushl   %esi  
         call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)  
         addl    $4,%esp          addl    $4,%esp
   #else /* XEN */
           /* Switch ring0 esp */
           movl    PCB_ESP0(%ebx),%eax
           movl    %eax,CPUVAR(ESP0)
   
         movl    L_ADDR(%esi),%esi          /* Don't bother with the rest if switching to a system process. */
           testl   $LW_SYSTEM,L_FLAG(%edi)
           jnz     4f
   
         /* Save stack pointers. */          /* Restore thread-private %fs/%gs descriptors. */
         movl    %esp,PCB_ESP(%esi)          movl    CPUVAR(GDT),%ecx
         movl    %ebp,PCB_EBP(%esi)          movl    PCB_FSD(%ebx), %eax
           movl    PCB_FSD+4(%ebx), %edx
           movl    %eax, (GUFS_SEL*8)(%ecx)
           movl    %edx, (GUFS_SEL*8+4)(%ecx)
           movl    PCB_GSD(%ebx), %eax
           movl    PCB_GSD+4(%ebx), %edx
           movl    %eax, (GUGS_SEL*8)(%ecx)
           movl    %edx, (GUGS_SEL*8+4)(%ecx)
   #endif /* XEN */
   
           /* Switch I/O bitmap */
           movl    PCB_IOMAP(%ebx),%eax
           orl     %eax,%eax
           jnz,pn  .Lcopy_iobitmap
           movl    $(IOMAP_INVALOFF << 16),CPUVAR(IOBASE)
   .Liobitmap_done:
   
           /* Is this process using RAS (restartable atomic sequences)? */
           movl    L_PROC(%edi),%eax
           cmpl    $0,P_RASLIST(%eax)
           jne     5f
   
 switch_exited:  
         /*          /*
          * Third phase: restore saved context.           * Restore cr0 (including FPU state).  Raise the IPL to IPL_IPI.
          *           * FPU IPIs can alter the LWP's saved cr0.  Dropping the priority
          * Registers:           * is deferred until mi_switch(), when cpu_switchto() returns.
          *   %eax, %ebx, %ecx, %edx - scratch  
          *   %esi - new pcb  
          *   %edi - new lwp  
          */           */
   2:
   #ifndef XEN
           movl    $IPL_IPI,CPUVAR(ILEVEL)
           movl    PCB_CR0(%ebx),%ecx
           movl    %cr0,%edx
   
         /* No interrupts while loading new state. */  
         cli  
         movl    L_ADDR(%edi),%esi  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%esi),%esp  
         movl    PCB_EBP(%esi),%ebp  
   
 #if 0  
         /* Don't bother with the rest if switching to a system process. */  
         testl   $PK_SYSTEM,L_FLAG(%edi);        XXX NJWLWP lwp's don't have PK_SYSTEM!  
         jnz     switch_restored  
 #endif  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  
         movl    %cr3,%eax  
         movl    %eax,PCB_CR3(%esi) /* XXX should be done by pmap_activate? */  
 #ifdef MULTIPROCESSOR  
         movl    CPUVAR(GDT),%eax  
 #else  
         /* Load TSS info. */  
         movl    _C_LABEL(gdt),%eax  
 #endif  
         movl    L_MD_TSS_SEL(%edi),%edx  
   
         andl    $~0x0200,4(%eax,%edx, 1)  
         ltr     %dx  
   
         pushl   %edi  
         call    _C_LABEL(pmap_activate)         # pmap_activate(p)  
         addl    $4,%esp  
   
 #if 0  
 switch_restored:  
 #endif  
         /* Restore cr0 (including FPU state). */  
         movl    PCB_CR0(%esi),%ecx  
 #ifdef MULTIPROCESSOR  
         /*          /*
          * If our floating point registers are on a different CPU,           * If our floating point registers are on a different CPU,
          * clear CR0_TS so we'll trap rather than reuse bogus state.           * set CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%esi),%ebx          movl    PCB_FPCPU(%ebx),%eax
         cmpl    CPUVAR(SELF),%ebx          cmpl    CPUVAR(SELF),%eax
         jz      1f          je      3f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
 1:  
 #endif  
         movl    %ecx,%cr0  
   
         /* Record new pcb. */  
         SET_CURPCB(%esi)  
   
         /* Interrupts are okay again. */  
         sti  
   
 /*  
  *  Check for restartable atomic sequences (RAS)  
  */  
         movl    CPUVAR(CURLWP),%edi  
         movl    L_PROC(%edi),%esi  
         cmpl    $0,P_RASLIST(%esi)  
         jne     2f  
 1:  
         movl    $1,%ebx  
   
 switch_return:          /* Reloading CR0 is very expensive - avoid if possible. */
         call    _C_LABEL(sched_unlock_idle)  3:      cmpl    %edx,%ecx
         cmpl    $0,CPUVAR(IPENDING)          je      4f
         jz      3f          movl    %ecx,%cr0
         pushl   $IPL_NONE               # spl0()  #endif /* XEN */
         call    _C_LABEL(spllower)      # process pending interrupts  
         addl    $4,%esp  
 3:  
         movl    $IPL_HIGH,CPUVAR(ILEVEL)        # splhigh()  
   
         movl    %ebx,%eax  
   
           /* Return to the new LWP, returning 'oldlwp' in %eax. */
   4:      movl    %esi,%eax
         popl    %edi          popl    %edi
         popl    %esi          popl    %esi
         popl    %ebx          popl    %ebx
         ret          ret
   
 2:                                      # check RAS list          /* Check for restartable atomic sequences (RAS). */
         movl    L_MD_REGS(%edi),%ebx  5:      movl    L_MD_REGS(%edi),%ecx
         movl    TF_EIP(%ebx),%eax          pushl   TF_EIP(%ecx)
         pushl   %eax          pushl   %eax
         pushl   %esi  
         call    _C_LABEL(ras_lookup)          call    _C_LABEL(ras_lookup)
         addl    $8,%esp          addl    $8,%esp
         cmpl    $-1,%eax          cmpl    $-1,%eax
         je      1b          je      2b
         movl    %eax,TF_EIP(%ebx)          movl    L_MD_REGS(%edi),%ecx
         jmp     1b          movl    %eax,TF_EIP(%ecx)
           jmp     2b
   
 /*  .Lcopy_iobitmap:
  * void cpu_switchto(struct lwp *current, struct lwp *next)          /* Copy I/O bitmap. */
  * Switch to the specified next LWP.          movl    $(IOMAPSIZE/4),%ecx
  */  
 ENTRY(cpu_switchto)  
         pushl   %ebx  
         pushl   %esi          pushl   %esi
         pushl   %edi          pushl   %edi
           movl    %eax,%esi               /* pcb_iomap */
 #ifdef DEBUG          movl    CPUVAR(SELF),%edi
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)          leal    CPU_INFO_IOMAP(%edi),%edi
         jae     1f          rep
         pushl   $2f          movsl
         call    _C_LABEL(panic)          popl    %edi
         /* NOTREACHED */          popl    %esi
 2:      .asciz  "not splsched() in cpu_switchto!"          movl    $((CPU_INFO_IOMAP - CPU_INFO_TSS) << 16),CPUVAR(IOBASE)
 1:          jmp     .Liobitmap_done
 #endif /* DEBUG */  END(cpu_switchto)
   
         movl    16(%esp),%esi           # current  
         movl    20(%esp),%edi           # next  
   
         /*  
          * Clear curlwp so that we don't accumulate system time while idle.  
          * This also insures that schedcpu() will move the old process to  
          * the correct queue if it happens to get called from the spllower()  
          * below and changes the priority.  (See corresponding comment in  
          * usrret()).  
          *  
          * XXX Is this necessary?  We know we won't go idle.  
          */  
         movl    $0,CPUVAR(CURLWP)  
   
         /*  
          * We're running at splhigh(), but it's otherwise okay to take  
          * interrupts here.  
          */  
         sti  
   
         /* Jump into the middle of cpu_switch */  
         xorl    %eax,%eax  
         jmp     switch_resume  
   
 /*  
  * void cpu_exit(struct lwp *l)  
  * Switch to the appropriate idle context (lwp0's if uniprocessor; the CPU's  
  * if multiprocessor) and deallocate the address space and kernel stack for p.  
  * Then jump into cpu_switch(), as if we were in the idle proc all along.  
  */  
 #ifndef MULTIPROCESSOR  
         .globl  _C_LABEL(lwp0)  
 #endif  
 /* LINTSTUB: Func: void cpu_exit(struct lwp *l) */  
 ENTRY(cpu_exit)  
         movl    4(%esp),%edi            # old process  
 #ifndef MULTIPROCESSOR  
         movl    $_C_LABEL(lwp0),%ebx  
         movl    L_ADDR(%ebx),%esi  
         movl    L_MD_TSS_SEL(%ebx),%edx  
 #else  
         movl    CPUVAR(IDLE_PCB),%esi  
         movl    CPUVAR(IDLE_TSS_SEL),%edx  
 #endif  
   
         /* Restore the idle context. */  
         cli  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%esi),%esp  
         movl    PCB_EBP(%esi),%ebp  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  
         movl    %cr3,%eax  
         movl    %eax,PCB_CR3(%esi)  
 #ifdef MULTIPROCESSOR  
         movl    CPUVAR(GDT),%eax  
 #else  
         /* Load TSS info. */  
         movl    _C_LABEL(gdt),%eax  
 #endif  
   
         andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)  
         ltr     %dx  
   
         /* We're always in the kernel, so we don't need the LDT. */  
   
         /* Restore cr0 (including FPU state). */  
         movl    PCB_CR0(%esi),%ecx  
         movl    %ecx,%cr0  
   
         /* Record new pcb. */  
         SET_CURPCB(%esi)  
   
         /* Now off the CPU. */  
         movl    $0,CPUVAR(CURLWP)  
   
         /* Interrupts are okay again. */  
         sti  
   
         /* Jump into cpu_switch() with the right state. */  
         xorl    %esi,%esi  
         jmp     idle_start  
   
 /*  /*
  * void savectx(struct pcb *pcb);   * void savectx(struct pcb *pcb);
    *
  * Update pcb, saving current processor state.   * Update pcb, saving current processor state.
  */   */
 /* LINTSTUB: Func: void savectx(struct pcb *pcb) */  
 ENTRY(savectx)  ENTRY(savectx)
         movl    4(%esp),%edx            # edx = pcb          movl    4(%esp),%edx            # edx = pcb
   
         /* Save stack pointers. */  
         movl    %esp,PCB_ESP(%edx)          movl    %esp,PCB_ESP(%edx)
         movl    %ebp,PCB_EBP(%edx)          movl    %ebp,PCB_EBP(%edx)
   
         ret          ret
   END(savectx)
   
 /*  /*
    * osyscall()
    *
  * Old call gate entry for syscall   * Old call gate entry for syscall
  */   */
 /* LINTSTUB: Var: char Xosyscall[1]; */  
 IDTVEC(osyscall)  IDTVEC(osyscall)
         /* Set eflags in trap frame. */          pushfl                  # set eflags in trap frame
         pushfl  
         popl    8(%esp)          popl    8(%esp)
         pushl   $7              # size of instruction for restart          pushl   $7              # size of instruction for restart
         jmp     syscall1          jmp     syscall1
   IDTVEC_END(osyscall)
   
 /*  /*
    * syscall()
    *
  * Trap gate entry for syscall   * Trap gate entry for syscall
  */   */
 /* LINTSTUB: Var: char Xsyscall[1]; */  
 IDTVEC(syscall)  IDTVEC(syscall)
         pushl   $2              # size of instruction for restart          pushl   $2              # size of instruction for restart
 syscall1:  syscall1:
         pushl   $T_ASTFLT       # trap # for doing ASTs          pushl   $T_ASTFLT       # trap # for doing ASTs
         INTRENTRY          INTRENTRY
   
 #ifdef DIAGNOSTIC  #ifdef DIAGNOSTIC
         cmpl    $0, CPUVAR(WANT_PMAPLOAD)  
         jz      1f  
         pushl   $6f  
         call    _C_LABEL(printf)  
         addl    $4, %esp  
 1:  
         movl    CPUVAR(ILEVEL),%ebx          movl    CPUVAR(ILEVEL),%ebx
         testl   %ebx,%ebx          testl   %ebx,%ebx
         jz      1f          jz      1f
Line 1249  syscall1:
Line 1105  syscall1:
 #endif  #endif
 1:  1:
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
         movl    CPUVAR(CURLWP),%edx          incl    CPUVAR(NSYSCALL)        # count it atomically
         movl    %esp,L_MD_REGS(%edx)    # save pointer to frame          movl    CPUVAR(CURLWP),%edi
         movl    L_PROC(%edx),%edx          movl    L_PROC(%edi),%edx
           movl    %esp,L_MD_REGS(%edi)    # save pointer to frame
         pushl   %esp          pushl   %esp
         call    *P_MD_SYSCALL(%edx)     # get pointer to syscall() function          call    *P_MD_SYSCALL(%edx)     # get pointer to syscall() function
         addl    $4,%esp          addl    $4,%esp
 .Lsyscall_checkast:  .Lsyscall_checkast:
         /* Check for ASTs on exit to user mode. */          /* Check for ASTs on exit to user mode. */
         cli          CLI(%eax)
         CHECK_ASTPENDING(%eax)          movl    L_MD_ASTPENDING(%edi), %eax
         je      1f          orl     CPUVAR(WANT_PMAPLOAD), %eax
         /* Always returning to user mode here. */  
         CLEAR_ASTPENDING(%eax)  
         sti  
         /* Pushed T_ASTFLT into tf_trapno on entry. */  
         pushl   %esp  
         call    _C_LABEL(trap)  
         addl    $4,%esp  
         jmp     .Lsyscall_checkast      /* re-check ASTs */  
 1:      CHECK_DEFERRED_SWITCH(%eax)  
         jnz     9f          jnz     9f
   #ifdef XEN
           STIC(%eax)
           jz      14f
           call    _C_LABEL(stipending)
           testl   %eax,%eax
           jz      14f
           /* process pending interrupts */
           CLI(%eax)
           movl    CPUVAR(ILEVEL), %ebx
           movl    $.Lsyscall_resume, %esi # address to resume loop at
   .Lsyscall_resume:
           movl    %ebx,%eax       # get cpl
           movl    CPUVAR(IUNMASK)(,%eax,4),%eax
           andl    CPUVAR(IPENDING),%eax   # any non-masked bits left?
           jz      17f
           bsrl    %eax,%eax
           btrl    %eax,CPUVAR(IPENDING)
           movl    CPUVAR(ISOURCES)(,%eax,4),%eax
           jmp     *IS_RESUME(%eax)
   17:     movl    %ebx, CPUVAR(ILEVEL)    #restore cpl
           jmp     .Lsyscall_checkast
   14:
   #endif /* XEN */
 #ifndef DIAGNOSTIC  #ifndef DIAGNOSTIC
         INTRFASTEXIT          INTRFASTEXIT
 #else /* DIAGNOSTIC */  #else /* DIAGNOSTIC */
         cmpl    $IPL_NONE,CPUVAR(ILEVEL)          cmpl    $IPL_NONE,CPUVAR(ILEVEL)
         jne     3f          jne     3f
         INTRFASTEXIT          INTRFASTEXIT
 3:      sti  3:      STI(%eax)
         pushl   $4f          pushl   $4f
         call    _C_LABEL(printf)          call    _C_LABEL(printf)
         addl    $4,%esp          addl    $4,%esp
 #ifdef DDB          pushl   $IPL_NONE
         int     $3          call    _C_LABEL(spllower)
 #endif /* DDB */          addl    $4,%esp
         movl    $IPL_NONE,CPUVAR(ILEVEL)          jmp     .Lsyscall_checkast
         jmp     2b  
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"
 6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"  
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
 9:      sti  9:
           cmpl    $0, CPUVAR(WANT_PMAPLOAD)
           jz      10f
           STI(%eax)
         call    _C_LABEL(pmap_load)          call    _C_LABEL(pmap_load)
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
   10:
           /* Always returning to user mode here. */
           movl    $0, L_MD_ASTPENDING(%edi)
           STI(%eax)
           /* Pushed T_ASTFLT into tf_trapno on entry. */
           pushl   %esp
           call    _C_LABEL(trap)
           addl    $4,%esp
           jmp     .Lsyscall_checkast      /* re-check ASTs */
   IDTVEC_END(syscall)
   
 #if NNPX > 0  #if NNPX > 0
 /*  /*
Line 1300  syscall1:
Line 1182  syscall1:
  * latch stuff in probintr() can be moved to npxprobe().   * latch stuff in probintr() can be moved to npxprobe().
  */   */
   
 /* LINTSTUB: Func: void probeintr(void) */  /*
    * void probeintr(void)
    */
 NENTRY(probeintr)  NENTRY(probeintr)
         ss          ss
         incl    _C_LABEL(npx_intrs_while_probing)          incl    _C_LABEL(npx_intrs_while_probing)
Line 1312  NENTRY(probeintr)
Line 1196  NENTRY(probeintr)
         outb    %al,$0xf0       # clear BUSY# latch          outb    %al,$0xf0       # clear BUSY# latch
         popl    %eax          popl    %eax
         iret          iret
   END(probeintr)
   
 /* LINTSTUB: Func: void probetrap(void) */  /*
    * void probetrap(void)
    */
 NENTRY(probetrap)  NENTRY(probetrap)
         ss          ss
         incl    _C_LABEL(npx_traps_while_probing)          incl    _C_LABEL(npx_traps_while_probing)
         fnclex          fnclex
         iret          iret
   END(probetrap)
   
 /* LINTSTUB: Func: int npx586bug1(int a, int b) */  /*
    * int npx586bug1(int a, int b)
    */
 NENTRY(npx586bug1)  NENTRY(npx586bug1)
         fildl   4(%esp)         # x          fildl   4(%esp)         # x
         fildl   8(%esp)         # y          fildl   8(%esp)         # y
Line 1332  NENTRY(npx586bug1)
Line 1222  NENTRY(npx586bug1)
         fistpl  (%esp)          fistpl  (%esp)
         popl    %eax          popl    %eax
         ret          ret
   END(npx586bug1)
 #endif /* NNPX > 0 */  #endif /* NNPX > 0 */
   
   /*
    * void sse2_zero_page(void *pg)
    *
    * Zero a page without polluting the cache.
    */
   ENTRY(sse2_zero_page)
           pushl   %ebp
           movl    %esp,%ebp
           movl    8(%esp), %edx
           movl    $PAGE_SIZE, %ecx
           xorl    %eax, %eax
           .align  16
   1:
           movnti  %eax, 0(%edx)
           movnti  %eax, 4(%edx)
           movnti  %eax, 8(%edx)
           movnti  %eax, 12(%edx)
           movnti  %eax, 16(%edx)
           movnti  %eax, 20(%edx)
           movnti  %eax, 24(%edx)
           movnti  %eax, 28(%edx)
           subl    $32, %ecx
           leal    32(%edx), %edx
           jnz     1b
           sfence
           pop     %ebp
           ret
   END(sse2_zero_page)
   
   /*
    * void sse2_copy_page(void *src, void *dst)
    *
    * Copy a page without polluting the cache.
    */
   ENTRY(sse2_copy_page)
           pushl   %ebp
           pushl   %ebx
           pushl   %esi
           pushl   %edi
           movl    20(%esp), %esi
           movl    24(%esp), %edi
           movl    $PAGE_SIZE, %ebp
           .align  16
   1:
           movl    0(%esi), %eax
           movl    4(%esi), %ebx
           movl    8(%esi), %ecx
           movl    12(%esi), %edx
           movnti  %eax, 0(%edi)
           movnti  %ebx, 4(%edi)
           movnti  %ecx, 8(%edi)
           movnti  %edx, 12(%edi)
           subl    $16, %ebp
           leal    16(%esi), %esi
           leal    16(%edi), %edi
           jnz     1b
           sfence
           popl    %edi
           popl    %esi
           popl    %ebx
           popl    %ebp
           ret
   END(sse2_copy_page)

Legend:
Removed from v.1.47  
changed lines
  Added in v.1.73

CVSweb <webmaster@jp.NetBSD.org>