[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.45 and 1.45.2.3

version 1.45, 2007/02/09 21:55:04 version 1.45.2.3, 2007/02/27 16:51:38
Line 107 
Line 107 
   
 #include <machine/asm.h>  #include <machine/asm.h>
   
 #if defined(MULTIPROCESSOR)  
   
 #define SET_CURLWP(lwp,cpu)                             \  
         movl    CPUVAR(SELF),cpu                ;       \  
         movl    lwp,CPUVAR(CURLWP)      ;       \  
         movl    cpu,L_CPU(lwp)  
   
 #else  
   
 #define SET_CURLWP(lwp,tcpu)            movl    lwp,CPUVAR(CURLWP)  
 #define GET_CURLWP(reg)                 movl    CPUVAR(CURLWP),reg  
   
 #endif  
   
 #define SET_CURPCB(reg)                 movl    reg,CPUVAR(CURPCB)  
   
 #define CLEAR_RESCHED(reg)              movl    reg,CPUVAR(RESCHED)  
   
 /* XXX temporary kluge; these should not be here */  /* XXX temporary kluge; these should not be here */
 /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */  /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */
 #include <dev/isa/isareg.h>  #include <dev/isa/isareg.h>
Line 642  begin:
Line 624  begin:
         call    _C_LABEL(main)          call    _C_LABEL(main)
   
 /*  /*
  * void proc_trampoline(void);   * void lwp_trampoline(void);
  * This is a trampoline function pushed onto the stack of a newly created   * This is a trampoline function pushed onto the stack of a newly created
  * process in order to do some additional setup.  The trampoline is entered by   * process in order to do some additional setup.  The trampoline is entered by
  * cpu_switch()ing to the process, so we abuse the callee-saved registers used   * cpu_switch()ing to the process, so we abuse the callee-saved registers used
  * by cpu_switch() to store the information about the stub to call.   * by cpu_switch() to store the information about the stub to call.
  * NOTE: This function does not have a normal calling sequence!   * NOTE: This function does not have a normal calling sequence!
  */   */
 /* LINTSTUB: Func: void proc_trampoline(void) */  /* LINTSTUB: Func: void lwp_trampoline(void) */
 NENTRY(proc_trampoline)  NENTRY(lwp_trampoline)
 #ifdef MULTIPROCESSOR          pushl   %ebp
         call    _C_LABEL(proc_trampoline_mp)          xorl    %ebp,%ebp
 #endif          pushl   %eax
         movl    $IPL_NONE,CPUVAR(ILEVEL)          call    _C_LABEL(lwp_startup)
           addl    $8,%esp
         pushl   %ebx          pushl   %ebx
         call    *%esi          call    *%esi
         addl    $4,%esp          addl    $4,%esp
Line 762  ENTRY(longjmp)
Line 745  ENTRY(longjmp)
   
 /*****************************************************************************/  /*****************************************************************************/
   
         .globl  _C_LABEL(sched_whichqs),_C_LABEL(sched_qs)  
         .globl  _C_LABEL(uvmexp),_C_LABEL(panic)          .globl  _C_LABEL(uvmexp),_C_LABEL(panic)
   
 #ifdef DIAGNOSTIC  #ifdef DIAGNOSTIC
Line 774  NENTRY(switch_error)
Line 756  NENTRY(switch_error)
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
   
 /*  /*
  * void cpu_switch(struct lwp *)   * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp)
  * Find a runnable lwp and switch to it.  Wait if necessary.  If the new   *
  * lwp is the same as the old one, we short-circuit the context save and   *      1. if (oldlwp != NULL), save its context.
  * restore.   *      2. then, restore context of newlwp.
  *   *
  * Note that the stack frame layout is known to "struct switchframe"   * Note that the stack frame layout is known to "struct switchframe"
  * in <machine/frame.h> and to the code in cpu_fork() which initializes   * in <machine/frame.h> and to the code in cpu_lwp_fork() which initializes
  * it for a new lwp.   * it for a new lwp.
  */   */
 ENTRY(cpu_switch)  ENTRY(cpu_switchto)
         pushl   %ebx          pushl   %ebx
         pushl   %esi          pushl   %esi
         pushl   %edi          pushl   %edi
   
 #ifdef DEBUG          movl    16(%esp),%esi           # oldlwp
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)          movl    20(%esp),%edi           # newlwp
         jae     1f  
         pushl   $2f  
         call    _C_LABEL(panic)  
         /* NOTREACHED */  
 2:      .asciz  "not splsched() in cpu_switch!"  
 1:  
 #endif /* DEBUG */  
   
         movl    16(%esp),%esi           # current          testl   %esi,%esi
           jz      switch_skipsave
         /*  
          * Clear curlwp so that we don't accumulate system time while idle.  
          * This also insures that schedcpu() will move the old lwp to  
          * the correct queue if it happens to get called from the spllower()  
          * below and changes the priority.  (See corresponding comment in  
          * userret()).  
          */  
         movl    $0,CPUVAR(CURLWP)  
         /*  
          * First phase: find new lwp.  
          *  
          * Registers:  
          *   %eax - queue head, scratch, then zero  
          *   %ebx - queue number  
          *   %ecx - cached value of whichqs  
          *   %edx - next lwp in queue  
          *   %esi - old lwp  
          *   %edi - new lwp  
          */  
   
         /* Look for new lwp. */  
         cli                             # splhigh doesn't do a cli  
         movl    _C_LABEL(sched_whichqs),%ecx  
         bsfl    %ecx,%ebx               # find a full q  
         jnz     switch_dequeue  
   
         /*          /*
          * idling:      save old context.           * Save old context.
          *  
          * Registers:  
          *   %eax, %ecx - scratch  
          *   %esi - old lwp, then old pcb  
          *   %edi - idle pcb  
          */           */
   
         pushl   %esi          movl    L_ADDR(%esi),%eax
         call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)          movl    %esp,PCB_ESP(%eax)
         addl    $4,%esp          movl    %ebp,PCB_EBP(%eax)
   
         movl    L_ADDR(%esi),%esi  
   
         /* Save stack pointers. */  
         movl    %esp,PCB_ESP(%esi)  
         movl    %ebp,PCB_EBP(%esi)  
   
         /* Find idle PCB for this CPU */  
 #ifndef MULTIPROCESSOR  
         movl    $_C_LABEL(lwp0),%ebx  
         movl    L_ADDR(%ebx),%edi  
         movl    L_MD_TSS_SEL(%ebx),%edx  
 #else  
         movl    CPUVAR(IDLE_PCB),%edi  
         movl    CPUVAR(IDLE_TSS_SEL),%edx  
 #endif  
         movl    $0,CPUVAR(CURLWP)               /* In case we fault... */  
   
         /* Restore the idle context (avoid interrupts) */  
         cli  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%edi),%esp  
         movl    PCB_EBP(%edi),%ebp  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  switch_skipsave:
         movl    %cr3,%eax  
         movl    %eax,PCB_CR3(%edi)  
 #ifdef MULTIPROCESSOR  
         movl    CPUVAR(GDT),%eax  
 #else  
         movl    _C_LABEL(gdt),%eax  
 #endif  
         andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)  
         ltr     %dx  
   
         /* We're always in the kernel, so we don't need the LDT. */  
   
         /* Restore cr0 (including FPU state). */  
         movl    PCB_CR0(%edi),%ecx  
         movl    %ecx,%cr0  
   
         /* Record new pcb. */  
         SET_CURPCB(%edi)  
   
         xorl    %esi,%esi  
         sti  
 idle_unlock:  
         call    _C_LABEL(sched_unlock_idle)  
         /* Interrupts are okay again. */  
         pushl   $IPL_NONE               # spl0()  
         call    _C_LABEL(spllower)      # process pending interrupts  
         addl    $4,%esp  
         jmp     idle_start  
 idle_zero:  
         sti  
         call    _C_LABEL(uvm_pageidlezero)  
         cli  
         cmpl    $0,_C_LABEL(sched_whichqs)  
         jnz     idle_exit  
 idle_loop:  
         /* Try to zero some pages. */  
         movl    _C_LABEL(uvm)+UVM_PAGE_IDLE_ZERO,%ecx  
         testl   %ecx,%ecx  
         jnz     idle_zero  
         sti  
         hlt  
 NENTRY(mpidle)  
 idle_start:  
         cli  
         cmpl    $0,_C_LABEL(sched_whichqs)  
         jz      idle_loop  
 idle_exit:  
         movl    $IPL_HIGH,CPUVAR(ILEVEL)                # splhigh  
         sti  
         call    _C_LABEL(sched_lock_idle)  
         movl    _C_LABEL(sched_whichqs),%ecx  
         bsfl    %ecx,%ebx  
         jz      idle_unlock  
   
 switch_dequeue:  
         /*          /*
          * we're running at splhigh(), but it's otherwise okay to take           * Switch to newlwp's stack.
          * interrupts here.  
          */           */
         sti  
         leal    _C_LABEL(sched_qs)(,%ebx,8),%eax # select q  
   
         movl    L_FORW(%eax),%edi       # unlink from front of process q  
 #ifdef  DIAGNOSTIC  
         cmpl    %edi,%eax               # linked to self (i.e. nothing queued)?  
         je      _C_LABEL(switch_error)  # not possible  
 #endif /* DIAGNOSTIC */  
         movl    L_FORW(%edi),%edx  
         movl    %edx,L_FORW(%eax)  
         movl    %eax,L_BACK(%edx)  
   
         cmpl    %edx,%eax               # q empty?  
         jne     3f  
   
         btrl    %ebx,%ecx               # yes, clear to indicate empty  
         movl    %ecx,_C_LABEL(sched_whichqs) # update q status  
   
 3:      /* We just did it. */  
         xorl    %eax,%eax  
         CLEAR_RESCHED(%eax)  
   
 switch_resume:          movl    L_ADDR(%edi),%ebx
 #ifdef  DIAGNOSTIC          movl    PCB_EBP(%ebx),%ebp
         cmpl    %eax,L_WCHAN(%edi)      # Waiting for something?          movl    PCB_ESP(%ebx),%esp
         jne     _C_LABEL(switch_error)  # Yes; shouldn't be queued.  
         cmpb    $LSRUN,L_STAT(%edi)     # In run state?  
         jne     _C_LABEL(switch_error)  # No; shouldn't be queued.  
 #endif /* DIAGNOSTIC */  
   
         /* Isolate lwp.  XXX Is this necessary? */  
         movl    %eax,L_BACK(%edi)  
   
         /* Record new lwp. */  
         movb    $LSONPROC,L_STAT(%edi)  # l->l_stat = LSONPROC  
         SET_CURLWP(%edi,%ecx)  
   
         /* Skip context switch if same lwp. */  
         xorl    %ebx,%ebx  
         cmpl    %edi,%esi  
         je      switch_return  
   
         /* If old lwp exited, don't bother. */  
         testl   %esi,%esi  
         jz      switch_exited  
   
         /*          /*
          * Second phase: save old context.           * Restore the rest of newlwp's context.
          *           *
          * Registers:           * Registers:
          *   %eax, %ecx - scratch           *   %ebx - new pcb
          *   %esi - old lwp, then old pcb  
          *   %edi - new lwp           *   %edi - new lwp
          */           */
   
         pushl   %esi  
         call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)  
         addl    $4,%esp  
   
         movl    L_ADDR(%esi),%esi  
   
         /* Save stack pointers. */  
         movl    %esp,PCB_ESP(%esi)  
         movl    %ebp,PCB_EBP(%esi)  
   
 switch_exited:  
         /*  
          * Third phase: restore saved context.  
          *  
          * Registers:  
          *   %eax, %ebx, %ecx, %edx - scratch  
          *   %esi - new pcb  
          *   %edi - new lwp  
          */  
   
         /* No interrupts while loading new state. */  
         cli  
         movl    L_ADDR(%edi),%esi  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%esi),%esp  
         movl    PCB_EBP(%esi),%ebp  
   
 #if 0  #if 0
         /* Don't bother with the rest if switching to a system process. */          /* Don't bother with the rest if switching to a system process. */
         testl   $P_SYSTEM,L_FLAG(%edi); XXX NJWLWP lwp's don't have P_SYSTEM!          testl   $LK_SYSTEM,L_FLAG(%edi);
         jnz     switch_restored          jnz     switch_restored
 #endif  #endif
   
         /* Switch TSS. Reset "task busy" flag before loading. */          /* Switch TSS. Reset "task busy" flag before loading. */
         movl    %cr3,%eax          movl    %cr3,%eax
         movl    %eax,PCB_CR3(%esi) /* XXX should be done by pmap_activate? */          movl    %eax,PCB_CR3(%ebx) /* for TSS gates */
   
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         movl    CPUVAR(GDT),%eax          movl    CPUVAR(GDT),%eax
 #else  #else
Line 1026  switch_exited:
Line 823  switch_exited:
         andl    $~0x0200,4(%eax,%edx, 1)          andl    $~0x0200,4(%eax,%edx, 1)
         ltr     %dx          ltr     %dx
   
         pushl   %edi  
         call    _C_LABEL(pmap_activate)         # pmap_activate(p)  
         addl    $4,%esp  
   
 #if 0  #if 0
 switch_restored:  switch_restored:
 #endif  #endif
   
           movl    $0,CPUVAR(RESCHED)
   
         /* Restore cr0 (including FPU state). */          /* Restore cr0 (including FPU state). */
         movl    PCB_CR0(%esi),%ecx          cli
           movl    PCB_CR0(%ebx),%ecx
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         /*          /*
          * If our floating point registers are on a different CPU,           * If our floating point registers are on a different CPU,
          * clear CR0_TS so we'll trap rather than reuse bogus state.           * set CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%esi),%ebx          movl    PCB_FPCPU(%ebx),%eax
         cmpl    CPUVAR(SELF),%ebx          cmpl    CPUVAR(SELF),%eax
         jz      1f          jz      1f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
 1:  1:
 #endif  #endif
         movl    %ecx,%cr0          movl    %ecx,%cr0
   
         /* Record new pcb. */  
         SET_CURPCB(%esi)  
   
         /* Interrupts are okay again. */          /* Interrupts are okay again. */
         sti          sti
   
 /*          /*
  *  Check for restartable atomic sequences (RAS)           *  Check for restartable atomic sequences (RAS)
  */           */
         movl    CPUVAR(CURLWP),%edi  
         movl    L_PROC(%edi),%esi  
         cmpl    $0,P_RASLIST(%esi)  
         jne     2f  
 1:  
         movl    $1,%ebx  
   
 switch_return:  
         call    _C_LABEL(sched_unlock_idle)  
         cmpl    $0,CPUVAR(IPENDING)  
         jz      3f  
         pushl   $IPL_NONE               # spl0()  
         call    _C_LABEL(spllower)      # process pending interrupts  
         addl    $4,%esp  
 3:  
         movl    $IPL_HIGH,CPUVAR(ILEVEL)        # splhigh()  
   
         movl    %ebx,%eax          movl    L_PROC(%edi),%ebx
           cmpl    $0,P_RASLIST(%ebx)
           jne     check_ras
   
   switch_return:
           movl    %esi,%eax       # return 'oldlwp'
         popl    %edi          popl    %edi
         popl    %esi          popl    %esi
         popl    %ebx          popl    %ebx
         ret          ret
   
 2:                                      # check RAS list  check_ras:
         movl    L_MD_REGS(%edi),%ebx          movl    L_MD_REGS(%edi),%ebx
         movl    TF_EIP(%ebx),%eax          movl    TF_EIP(%ebx),%eax
         pushl   %eax          pushl   %eax
Line 1089  switch_return:
Line 871  switch_return:
         call    _C_LABEL(ras_lookup)          call    _C_LABEL(ras_lookup)
         addl    $8,%esp          addl    $8,%esp
         cmpl    $-1,%eax          cmpl    $-1,%eax
         je      1b          je      switch_return
         movl    %eax,TF_EIP(%ebx)          movl    %eax,TF_EIP(%ebx)
         jmp     1b          jmp     switch_return
   
 /*  
  * void cpu_switchto(struct lwp *current, struct lwp *next)  
  * Switch to the specified next LWP.  
  */  
 ENTRY(cpu_switchto)  
         pushl   %ebx  
         pushl   %esi  
         pushl   %edi  
   
 #ifdef DEBUG  
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)  
         jae     1f  
         pushl   $2f  
         call    _C_LABEL(panic)  
         /* NOTREACHED */  
 2:      .asciz  "not splsched() in cpu_switchto!"  
 1:  
 #endif /* DEBUG */  
   
         movl    16(%esp),%esi           # current  
         movl    20(%esp),%edi           # next  
   
         /*  
          * Clear curlwp so that we don't accumulate system time while idle.  
          * This also insures that schedcpu() will move the old process to  
          * the correct queue if it happens to get called from the spllower()  
          * below and changes the priority.  (See corresponding comment in  
          * usrret()).  
          *  
          * XXX Is this necessary?  We know we won't go idle.  
          */  
         movl    $0,CPUVAR(CURLWP)  
   
         /*  
          * We're running at splhigh(), but it's otherwise okay to take  
          * interrupts here.  
          */  
         sti  
   
         /* Jump into the middle of cpu_switch */  
         xorl    %eax,%eax  
         jmp     switch_resume  
   
 /*  
  * void cpu_exit(struct lwp *l)  
  * Switch to the appropriate idle context (lwp0's if uniprocessor; the CPU's  
  * if multiprocessor) and deallocate the address space and kernel stack for p.  
  * Then jump into cpu_switch(), as if we were in the idle proc all along.  
  */  
 #ifndef MULTIPROCESSOR  
         .globl  _C_LABEL(lwp0)  
 #endif  
 /* LINTSTUB: Func: void cpu_exit(struct lwp *l) */  
 ENTRY(cpu_exit)  
         movl    4(%esp),%edi            # old process  
 #ifndef MULTIPROCESSOR  
         movl    $_C_LABEL(lwp0),%ebx  
         movl    L_ADDR(%ebx),%esi  
         movl    L_MD_TSS_SEL(%ebx),%edx  
 #else  
         movl    CPUVAR(IDLE_PCB),%esi  
         movl    CPUVAR(IDLE_TSS_SEL),%edx  
 #endif  
   
         /* Restore the idle context. */  
         cli  
   
         /* Restore stack pointers. */  
         movl    PCB_ESP(%esi),%esp  
         movl    PCB_EBP(%esi),%ebp  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  
         movl    %cr3,%eax  
         movl    %eax,PCB_CR3(%esi)  
 #ifdef MULTIPROCESSOR  
         movl    CPUVAR(GDT),%eax  
 #else  
         /* Load TSS info. */  
         movl    _C_LABEL(gdt),%eax  
 #endif  
   
         andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)  
         ltr     %dx  
   
         /* We're always in the kernel, so we don't need the LDT. */  
   
         /* Restore cr0 (including FPU state). */  
         movl    PCB_CR0(%esi),%ecx  
         movl    %ecx,%cr0  
   
         /* Record new pcb. */  
         SET_CURPCB(%esi)  
   
         /* Now off the CPU. */  
         movl    $0,CPUVAR(CURLWP)  
   
         /* Interrupts are okay again. */  
         sti  
   
         /* Jump into cpu_switch() with the right state. */  
         xorl    %esi,%esi  
         jmp     idle_start  
   
 /*  /*
  * void savectx(struct pcb *pcb);   * void savectx(struct pcb *pcb);
Line 1202  ENTRY(cpu_exit)
Line 881  ENTRY(cpu_exit)
  */   */
 /* LINTSTUB: Func: void savectx(struct pcb *pcb) */  /* LINTSTUB: Func: void savectx(struct pcb *pcb) */
 ENTRY(savectx)  ENTRY(savectx)
         movl    4(%esp),%edx            # edx = p->p_addr          movl    4(%esp),%edx            # edx = pcb
   
         /* Save stack pointers. */          /* Save stack pointers. */
         movl    %esp,PCB_ESP(%edx)          movl    %esp,PCB_ESP(%edx)

Legend:
Removed from v.1.45  
changed lines
  Added in v.1.45.2.3

CVSweb <webmaster@jp.NetBSD.org>