[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.45.2.1 and 1.58.6.5

version 1.45.2.1, 2007/02/17 10:30:45 version 1.58.6.5, 2008/01/13 11:26:56
Line 1 
Line 1 
 /*      $NetBSD$        */  /*      $NetBSD$        */
   
   /*
    * Copyright-o-rama!
    */
   
   /*
    * Copyright (c) 2006 Manuel Bouyer.
    *
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions
    * are met:
    * 1. Redistributions of source code must retain the above copyright
    *    notice, this list of conditions and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright
    *    notice, this list of conditions and the following disclaimer in the
    *    documentation and/or other materials provided with the distribution.
    * 3. All advertising materials mentioning features or use of this software
    *    must display the following acknowledgement:
    *      This product includes software developed by Manuel Bouyer.
    * 4. The name of the author may not be used to endorse or promote products
    *    derived from this software without specific prior written permission.
    *
    * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
    * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
    * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
    * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
    * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
    * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
    * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
    * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
    *
    */
   
   /*
    * Copyright (c) 2001 Wasabi Systems, Inc.
    * All rights reserved.
    *
    * Written by Frank van der Linden for Wasabi Systems, Inc.
    *
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions
    * are met:
    * 1. Redistributions of source code must retain the above copyright
    *    notice, this list of conditions and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright
    *    notice, this list of conditions and the following disclaimer in the
    *    documentation and/or other materials provided with the distribution.
    * 3. All advertising materials mentioning features or use of this software
    *    must display the following acknowledgement:
    *      This product includes software developed for the NetBSD Project by
    *      Wasabi Systems, Inc.
    * 4. The name of Wasabi Systems, Inc. may not be used to endorse
    *    or promote products derived from this software without specific prior
    *    written permission.
    *
    * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
    * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
    * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
    * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
    * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
    * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
    * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
    * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    * POSSIBILITY OF SUCH DAMAGE.
    */
   
   
 /*-  /*-
  * Copyright (c) 1998, 2000, 2004 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
  *   *
  * This code is derived from software contributed to The NetBSD Foundation   * This code is derived from software contributed to The NetBSD Foundation
Line 70 
Line 140 
  *      @(#)locore.s    7.3 (Berkeley) 5/13/91   *      @(#)locore.s    7.3 (Berkeley) 5/13/91
  */   */
   
 #include "opt_compat_netbsd.h"  #include <machine/asm.h>
   __KERNEL_RCSID(0, "$NetBSD$");
   
 #include "opt_compat_oldboot.h"  #include "opt_compat_oldboot.h"
 #include "opt_cputype.h"  
 #include "opt_ddb.h"  #include "opt_ddb.h"
 #include "opt_ipkdb.h"  
 #include "opt_lockdebug.h"  
 #include "opt_multiprocessor.h"  
 #include "opt_realmem.h"  #include "opt_realmem.h"
 #include "opt_user_ldt.h"  
 #include "opt_vm86.h"  #include "opt_vm86.h"
   #include "opt_xen.h"
   
 #include "npx.h"  #include "npx.h"
 #include "assym.h"  #include "assym.h"
Line 94 
Line 162 
 #include <machine/segments.h>  #include <machine/segments.h>
 #include <machine/specialreg.h>  #include <machine/specialreg.h>
 #include <machine/trap.h>  #include <machine/trap.h>
   
 #if NLAPIC > 0  
 #include <machine/i82489reg.h>  #include <machine/i82489reg.h>
 #endif  #include <machine/frameasm.h>
   #include <machine/i82489reg.h>
   #ifndef XEN
 #include <machine/multiboot.h>  #include <machine/multiboot.h>
   #endif
 /* LINTSTUB: include <sys/types.h> */  
 /* LINTSTUB: include <machine/cpu.h> */  
 /* LINTSTUB: include <sys/systm.h> */  
   
 #include <machine/asm.h>  
   
 /* XXX temporary kluge; these should not be here */  /* XXX temporary kluge; these should not be here */
 /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */  /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */
 #include <dev/isa/isareg.h>  #include <dev/isa/isareg.h>
   
   #ifdef XEN
 /* Disallow old names for REALBASEMEM */  /*
 #ifdef BIOSBASEMEM   * Xen guest identifier and loader selection
 #error BIOSBASEMEM option deprecated; use REALBASEMEM only if memory size reported by latest boot block is incorrect   */
   .section __xen_guest
   #ifdef XEN3
           .ascii  "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0"
   #if defined(DOM0OPS) || !defined(XEN_COMPAT_030001)
           .ascii  ",VIRT_BASE=0xc0000000" /* KERNBASE */
           .ascii  ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */
   #else
           .ascii  ",VIRT_BASE=0xc0100000" /* KERNTEXTOFF */
           .ascii  ",ELF_PADDR_OFFSET=0xc0100000" /* KERNTEXTOFF */
 #endif  #endif
           .ascii  ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */
 /* Disallow old names for REALEXTMEM */  #if !defined(XEN_COMPAT_030001)
 #ifdef EXTMEM_SIZE          .ascii  ",HYPERCALL_PAGE=0x00000101"
 #error EXTMEM_SIZE option deprecated; use REALEXTMEM only if memory size reported by latest boot block is incorrect                  /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */
 #endif  #endif
 #ifdef BIOSEXTMEM  #ifdef PAE
 #error BIOSEXTMEM option deprecated; use REALEXTMEM only if memory size reported by latest boot block is incorrect          .ascii  ",PAE=yes[extended-cr3]"
 #endif  #endif
   #else /* !XEN3 */
 #include <machine/frameasm.h>          .ascii  "GUEST_OS=netbsd,GUEST_VER=2.0,XEN_VER=2.0"
   #endif /* XEN3 */
           .ascii  ",LOADER=generic"
 #ifdef MULTIPROCESSOR  #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)
 #include <machine/i82489reg.h>          .ascii  ",BSD_SYMTAB=yes"
   #endif
           .byte   0
 #endif  #endif
   
 /*  /*
Line 142 
Line 215 
         .globl  _C_LABEL(atdevbase)          .globl  _C_LABEL(atdevbase)
         .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)          .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)
         .globl  _C_LABEL(gdt)          .globl  _C_LABEL(gdt)
 #ifdef I586_CPU  
         .globl  _C_LABEL(idt)          .globl  _C_LABEL(idt)
 #endif  
         .globl  _C_LABEL(lapic_tpr)          .globl  _C_LABEL(lapic_tpr)
   
 #if NLAPIC > 0  #if NLAPIC > 0
Line 170  _C_LABEL(lapic_tpr):
Line 241  _C_LABEL(lapic_tpr):
         .long 0          .long 0
 #endif  #endif
   
   _C_LABEL(cpu):          .long   0       # are we 80486, Pentium, or..
 _C_LABEL(cpu):          .long   0       # are we 386, 386sx, or 486,  
                                         #   or Pentium, or..  
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(proc0uarea):   .long   0  _C_LABEL(proc0uarea):   .long   0
 _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm  _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm
   _C_LABEL(tablesize):    .long   0
   
         .space 512          .space 1024
 tmpstk:  tmpstk:
   
   #ifndef XEN
 #define _RELOC(x)       ((x) - KERNBASE)  #define _RELOC(x)       ((x) - KERNBASE)
   #else
   #define _RELOC(x)       ((x))
   #endif /* XEN */
 #define RELOC(x)        _RELOC(_C_LABEL(x))  #define RELOC(x)        _RELOC(_C_LABEL(x))
   
         .text          .text
Line 189  tmpstk:
Line 262  tmpstk:
         .set    _C_LABEL(kernel_text),KERNTEXTOFF          .set    _C_LABEL(kernel_text),KERNTEXTOFF
   
         .globl  start          .globl  start
   #ifndef XEN
 start:  movw    $0x1234,0x472                   # warm boot  start:  movw    $0x1234,0x472                   # warm boot
   
 #if defined(MULTIBOOT)  #if defined(MULTIBOOT)
Line 421  try586: /* Use the `cpuid' instruction. 
Line 495  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Virtual address space of kernel:   * Virtual address space of kernel:
  *   *
  * text | data | bss | [syms] | page dir | proc0 kstack   * text | data | bss | [syms] | page dir | proc0 kstack | L1 ptp
  *                            0          1       2      3   *                            0          1       2      3
  */   */
 #define PROC0PDIR       ((0)              * PAGE_SIZE)  
 #define PROC0STACK      ((1)              * PAGE_SIZE)  #define PROC0_PDIR_OFF  0
 #define SYSMAP          ((1+UPAGES)       * PAGE_SIZE)  #define PROC0_STK_OFF   (PROC0_PDIR_OFF + PAGE_SIZE)
 #define TABLESIZE       ((1+UPAGES) * PAGE_SIZE) /* + nkpde * PAGE_SIZE */  #define PROC0_PTP1_OFF  (PROC0_STK_OFF + UPAGES * PAGE_SIZE)
   
   /*
    * fillkpt
    *      eax = pte (page frame | control | status)
    *      ebx = page table address
    *      ecx = number of pages to map
    */
   
   #define fillkpt \
   1:      movl    %eax,(%ebx)     ;       /* store phys addr */ \
           addl    $4,%ebx         ;       /* next pte/pde */ \
           addl    $PAGE_SIZE,%eax ;       /* next phys page */ \
           loop    1b              ;  \
   
   
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
Line 441  try586: /* Use the `cpuid' instruction. 
Line 529  try586: /* Use the `cpuid' instruction. 
 1:  1:
 #endif  #endif
   
         /* Calculate where to start the bootstrap tables. */          /* Compute sizes */
         movl    %edi,%esi                       # edi = esym ? esym : end          movl    %edi,%esi                       # edi = esym ? esym : end
         addl    $PGOFSET,%esi                   # page align up          addl    $PGOFSET,%esi                   # page align up
         andl    $~PGOFSET,%esi          andl    $~PGOFSET,%esi
   
         /*          /* nkptp[1] = (esi + ~L2_FRAME) >> L2_SHIFT + 1; */
          * Calculate the size of the kernel page table directory, and          movl    %esi,%eax
          * how many entries it will have.  Adjust nkpde to the actual          addl    $~L2_FRAME,%eax
          * kernel size automatically.  Account for the bootstrap tables,          shrl    $L2_SHIFT,%eax
          * round up, and add an extra 4MB.          incl    %eax            /* one more ptp for VAs stolen by bootstrap */
          */  1:      movl    %eax,RELOC(nkptp)+1*4
         leal    TABLESIZE+NBPD+PDOFSET(%edi),%eax  
         shrl    $PDSHIFT,%eax          /* tablesize = (1 + UPAGES + nkptp) << PGSHIFT; */
         movl    RELOC(nkpde),%ecx               # get nkpde          addl    $(1+UPAGES),%eax
         cmpl    %ecx,%eax          shll    $PGSHIFT,%eax
         jb      1f          movl    %eax,RELOC(tablesize)
         movl    %eax,%ecx  
 1:      cmpl    $NKPTP_MIN,%ecx                 # larger than min?          /* ensure that nkptp covers bootstrap tables */
         jge     1f          addl    %esi,%eax
         movl    $NKPTP_MIN,%ecx                 # set at min          addl    $~L2_FRAME,%eax
         jmp     2f          shrl    $L2_SHIFT,%eax
 1:      cmpl    $NKPTP_MAX,%ecx                 # larger than max?          incl    %eax
         jle     2f          cmpl    %eax,RELOC(nkptp)+1*4
         movl    $NKPTP_MAX,%ecx          jnz     1b
 2:      movl    %ecx,RELOC(nkpde)  
           /* Clear tables */
         /* Clear memory for bootstrap tables. */          movl    %esi,%edi
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                       # end of tables  
         subl    %edi,%ecx                       # size of tables  
         shrl    $2,%ecx  
         xorl    %eax,%eax          xorl    %eax,%eax
         cld          cld
           movl    RELOC(tablesize),%ecx
           shrl    $2,%ecx
         rep          rep
         stosl          stosl
   
 /*          leal    (PROC0_PTP1_OFF)(%esi), %ebx
  * fillkpt  
  *      eax = pte (page frame | control | status)  
  *      ebx = page table address  
  *      ecx = number of pages to map  
  */  
 #define fillkpt         \  
 1:      movl    %eax,(%ebx)     ; \  
         addl    $PAGE_SIZE,%eax ; /* increment physical address */ \  
         addl    $4,%ebx         ; /* next pte */ \  
         loop    1b              ;  
   
 /*  /*
  * Build initial page tables.   * Build initial page tables.
  */   */
         /* Calculate end of text segment, rounded to a page. */          /*
         leal    (RELOC(etext)+PGOFSET),%edx           * Compute &__data_start - KERNBASE. This can't be > 4G,
            * or we can't deal with it anyway, since we can't load it in
            * 32 bit mode. So use the bottom 32 bits.
            */
           movl    $RELOC(__data_start),%edx
         andl    $~PGOFSET,%edx          andl    $~PGOFSET,%edx
   
         /* Skip over the first 1MB. */          /*
            * Skip the first MB.
            */
         movl    $_RELOC(KERNTEXTOFF),%eax          movl    $_RELOC(KERNTEXTOFF),%eax
         movl    %eax,%ecx          movl    %eax,%ecx
         shrl    $PGSHIFT,%ecx          shrl    $(PGSHIFT-2),%ecx       /* ((n >> PGSHIFT) << 2) for # pdes */
         leal    (SYSMAP)(%esi,%ecx,4),%ebx          addl    %ecx,%ebx
   
         /* Map the kernel text read-only. */          /* Map the kernel text read-only. */
         movl    %edx,%ecx          movl    %edx,%ecx
Line 512  try586: /* Use the `cpuid' instruction. 
Line 593  try586: /* Use the `cpuid' instruction. 
   
         /* Map the data, BSS, and bootstrap tables read-write. */          /* Map the data, BSS, and bootstrap tables read-write. */
         leal    (PG_V|PG_KW)(%edx),%eax          leal    (PG_V|PG_KW)(%edx),%eax
         movl    RELOC(nkpde),%ecx          movl    RELOC(tablesize),%ecx
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                               # end of tables          addl    %esi,%ecx                               # end of tables
         subl    %edx,%ecx                               # subtract end of text          subl    %edx,%ecx                               # subtract end of text
         shrl    $PGSHIFT,%ecx          shrl    $PGSHIFT,%ecx
         fillkpt          fillkpt
   
         /* Map ISA I/O memory. */          /* Map ISA I/O mem (later atdevbase) */
         movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set          movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set
         movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,          movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,
         fillkpt          fillkpt
Line 528  try586: /* Use the `cpuid' instruction. 
Line 607  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Construct a page table directory.   * Construct a page table directory.
  */   */
         /* Install PDEs for temporary double map of kernel. */          /* Set up top level entries for identity mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF)(%esi),%ebx
         leal    (PROC0PDIR+0*4)(%esi),%ebx              # which is where temp maps!          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Map kernel PDEs. */          /* Set up top level entries for actual kernel mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*4)(%esi),%ebx
         leal    (PROC0PDIR+PDSLOT_KERN*4)(%esi),%ebx    # kernel pde offset          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Install a PDE recursively mapping page directory as a page table! */          /* Install a PDE recursively mapping page directory as a page table! */
         leal    (PROC0PDIR+PG_V|PG_KW)(%esi),%eax       # pte for ptd          leal    (PROC0_PDIR_OFF + PDIR_SLOT_PTE*4)(%esi),%ebx
         movl    %eax,(PROC0PDIR+PDSLOT_PTE*4)(%esi)     # recursive PD slot          leal    (PROC0_PDIR_OFF)(%esi),%eax
           orl     $(PG_V|PG_KW),%eax
           movl    %eax,(%ebx)
   
   
         /* Save phys. addr of PDP, for libkvm. */          /* Save phys. addr of PDP, for libkvm. */
         movl    %esi,RELOC(PDPpaddr)          movl    %esi,RELOC(PDPpaddr)
   
         /* Load base of page directory and enable mapping. */          /*
            * Startup checklist:
            * 1. Load %cr3 with pointer to PDIR.
            */
         movl    %esi,%eax               # phys address of ptd in proc 0          movl    %esi,%eax               # phys address of ptd in proc 0
         movl    %eax,%cr3               # load ptd addr into mmu          movl    %eax,%cr3               # load ptd addr into mmu
   
           /*
            * 2. Enable paging and the rest of it.
            */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax
Line 559  try586: /* Use the `cpuid' instruction. 
Line 650  try586: /* Use the `cpuid' instruction. 
         ret          ret
   
 begin:  begin:
         /* Now running relocated at KERNBASE.  Remove double mapping. */          /*
         movl    _C_LABEL(nkpde),%ecx            # for this many pde s,           * We have arrived.
         leal    (PROC0PDIR+0*4)(%esi),%ebx      # which is where temp maps!           * There's no need anymore for the identity mapping in low
         addl    $(KERNBASE), %ebx       # now use relocated address           * memory, remove it.
            */
           movl    _C_LABEL(nkptp)+1*4,%ecx
           leal    (PROC0_PDIR_OFF)(%esi),%ebx     # old, phys  address of PDIR
           addl    $(KERNBASE), %ebx       # new, virtual address of PDIR
 1:      movl    $0,(%ebx)  1:      movl    $0,(%ebx)
         addl    $4,%ebx # next pde          addl    $4,%ebx
         loop    1b          loop    1b
   
         /* Relocate atdevbase. */          /* Relocate atdevbase. */
         movl    _C_LABEL(nkpde),%edx          movl    $KERNBASE,%edx
         shll    $PGSHIFT,%edx          addl    _C_LABEL(tablesize),%edx
         addl    $(TABLESIZE+KERNBASE),%edx  
         addl    %esi,%edx          addl    %esi,%edx
         movl    %edx,_C_LABEL(atdevbase)          movl    %edx,_C_LABEL(atdevbase)
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (PROC0STACK+KERNBASE)(%esi),%eax          leal    (PROC0_STK_OFF+KERNBASE)(%esi),%eax
         movl    %eax,_C_LABEL(proc0uarea)          movl    %eax,_C_LABEL(proc0uarea)
         leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
         movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3          movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3
Line 594  begin:
Line 688  begin:
         call    _C_LABEL(initgdt)          call    _C_LABEL(initgdt)
         addl    $4,%esp          addl    $4,%esp
   
         movl    _C_LABEL(nkpde),%eax          movl    _C_LABEL(tablesize),%eax
         shll    $PGSHIFT,%eax  
         addl    $TABLESIZE,%eax  
         addl    %esi,%eax               # skip past stack and page tables          addl    %esi,%eax               # skip past stack and page tables
   
         pushl   %eax          pushl   %eax
Line 622  begin:
Line 714  begin:
 #endif /* SAFARI_FIFO_HACK */  #endif /* SAFARI_FIFO_HACK */
   
         call    _C_LABEL(main)          call    _C_LABEL(main)
   #else /* XEN */
   start:
           /* First, reset the PSL. */
           pushl   $PSL_MBO
           popfl
   
           cld
   #ifdef XEN3
           movl    %esp, %ebx              # save start of available space
   #else
           movl    %esi,%ebx               # save start_info pointer
   #endif
           movl    $_RELOC(tmpstk),%esp    # bootstrap stack end location
   
           /* Clear BSS first so that there are no surprises... */
           xorl    %eax,%eax
           movl    $RELOC(__bss_start),%edi
           movl    $RELOC(_end),%ecx
           subl    %edi,%ecx
           rep stosb
   
           /* Copy the necessary stuff from start_info structure. */
           /* We need to copy shared_info early, so that sti/cli work */
           movl    $RELOC(start_info_union),%edi
           movl    $128,%ecx
           rep movsl
   
           /* Clear segment registers; always null in proc0. */
           xorl    %eax,%eax
           movw    %ax,%fs
           movw    %ax,%gs
           decl    %eax
           movl    %eax,RELOC(cpu_info_primary)+CPU_INFO_LEVEL
   
           xorl    %eax,%eax
           cpuid
           movl    %eax,RELOC(cpu_info_primary)+CPU_INFO_LEVEL
   
           call    xen_pmap_bootstrap
           /*
            * First avail returned by xen_pmap_bootstrap in %eax
            */
           movl    %eax, %esi;
           movl    %esi, _C_LABEL(proc0uarea)
   
   #define PROC0PDIR       ((0)              * PAGE_SIZE)
   #define PROC0STACK      ((1)              * PAGE_SIZE)
   
           /* Set up bootstrap stack. */
           leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
           xorl    %ebp,%ebp               # mark end of frames
   
           addl    $USPACE, %esi
           subl    $KERNBASE, %esi         #init386 want a physical address
           pushl   %esi
           call    _C_LABEL(init386)       # wire 386 chip for unix operation
           addl    $4,%esp
           call    _C_LABEL(main)
   
   #if defined(XEN3) && !defined(XEN_COMPAT_030001)
   /* space for the hypercall call page */
   #define HYPERCALL_PAGE_OFFSET 0x1000
   .org HYPERCALL_PAGE_OFFSET
   ENTRY(hypercall_page)
   .skip 0x1000
   #endif /* defined(XEN3) && !defined(XEN_COMPAT_030001) */
   
   /*
    * void lgdt_finish(void);
    * Finish load a new GDT pointer (do any necessary cleanup).
    * XXX It's somewhat questionable whether reloading all the segment registers
    * is necessary, since the actual descriptor data is not changed except by
    * process creation and exit, both of which clean up via task switches.  OTOH,
    * this only happens at run time when the GDT is resized.
    */
   /* LINTSTUB: Func: void lgdt_finish(void) */
   NENTRY(lgdt_finish)
           movl    $GSEL(GDATA_SEL, SEL_KPL),%eax
           movw    %ax,%ds
           movw    %ax,%es
           movw    %ax,%gs
           movw    %ax,%ss
           movl    $GSEL(GCPU_SEL, SEL_KPL),%eax
           movw    %ax,%fs
           /* Reload code selector by doing intersegment return. */
           popl    %eax
           pushl   $GSEL(GCODE_SEL, SEL_KPL)
           pushl   %eax
           lret
   
   #endif /* XEN */
   
 /*  /*
  * void lwp_trampoline(void);   * void lwp_trampoline(void);
    *
  * This is a trampoline function pushed onto the stack of a newly created   * This is a trampoline function pushed onto the stack of a newly created
  * process in order to do some additional setup.  The trampoline is entered by   * process in order to do some additional setup.  The trampoline is entered by
  * cpu_switch()ing to the process, so we abuse the callee-saved registers used   * cpu_switch()ing to the process, so we abuse the callee-saved registers used
  * by cpu_switch() to store the information about the stub to call.   * by cpu_switch() to store the information about the stub to call.
  * NOTE: This function does not have a normal calling sequence!   * NOTE: This function does not have a normal calling sequence!
  */   */
 /* LINTSTUB: Func: void lwp_trampoline(void) */  
 NENTRY(lwp_trampoline)  NENTRY(lwp_trampoline)
         pushl   %ebp          pushl   %ebp
         xorl    %ebp,%ebp          xorl    %ebp,%ebp
Line 641  NENTRY(lwp_trampoline)
Line 824  NENTRY(lwp_trampoline)
         pushl   %ebx          pushl   %ebx
         call    *%esi          call    *%esi
         addl    $4,%esp          addl    $4,%esp
         DO_DEFERRED_SWITCH(%eax)          DO_DEFERRED_SWITCH
         INTRFASTEXIT          INTRFASTEXIT
         /* NOTREACHED */          /* NOTREACHED */
   
 /*****************************************************************************/  
 #ifdef COMPAT_16  
 /*  /*
  * Signal trampoline; copied to top of user stack.   * sigcode()
    *
    * Signal trampoline; copied to top of user stack.  Used only for
    * compatibility with old releases of NetBSD.
  */   */
 /* LINTSTUB: Var: char sigcode[1], esigcode[1]; */  
 NENTRY(sigcode)  NENTRY(sigcode)
         /*          /*
          * Handler has returned here as if we called it.  The sigcontext           * Handler has returned here as if we called it.  The sigcontext
Line 665  NENTRY(sigcode)
Line 848  NENTRY(sigcode)
         int     $0x80                   # exit if sigreturn fails          int     $0x80                   # exit if sigreturn fails
         .globl  _C_LABEL(esigcode)          .globl  _C_LABEL(esigcode)
 _C_LABEL(esigcode):  _C_LABEL(esigcode):
 #endif  
   
 /*****************************************************************************/  
   
 /*  
  * The following is i386-specific nonsense.  
  */  
   
 /*  
  * void lgdt(struct region_descriptor *rdp);  
  * Load a new GDT pointer (and do any necessary cleanup).  
  * XXX It's somewhat questionable whether reloading all the segment registers  
  * is necessary, since the actual descriptor data is not changed except by  
  * process creation and exit, both of which clean up via task switches.  OTOH,  
  * this only happens at run time when the GDT is resized.  
  */  
 /* LINTSTUB: Func: void lgdt(struct region_descriptor *rdp) */  
 NENTRY(lgdt)  
         /* Reload the descriptor table. */  
         movl    4(%esp),%eax  
         lgdt    (%eax)  
         /* Flush the prefetch queue. */  
         jmp     1f  
         nop  
 1:      /* Reload "stale" selectors. */  
         movl    $GSEL(GDATA_SEL, SEL_KPL),%eax  
         movw    %ax,%ds  
         movw    %ax,%es  
         movw    %ax,%gs  
         movw    %ax,%ss  
         movl    $GSEL(GCPU_SEL, SEL_KPL),%eax  
         movw    %ax,%fs  
         /* Reload code selector by doing intersegment return. */  
         popl    %eax  
         pushl   $GSEL(GCODE_SEL, SEL_KPL)  
         pushl   %eax  
         lret  
   
 NENTRY(x86_flush)  
         /* Reload code selector by doing intersegment return. */  
         popl    %eax  
         pushl   $GSEL(GCODE_SEL, SEL_KPL)  
         pushl   %eax  
         lret  
   
 /*****************************************************************************/  
   
 /*  /*
  * These functions are primarily used by DDB.   * int setjmp(label_t *)
    *
    * Used primarily by DDB.
  */   */
   
 /* LINTSTUB: Func: int setjmp (label_t *l) */  
 ENTRY(setjmp)  ENTRY(setjmp)
         movl    4(%esp),%eax          movl    4(%esp),%eax
         movl    %ebx,(%eax)             # save ebx          movl    %ebx,(%eax)             # save ebx
Line 726  ENTRY(setjmp)
Line 863  ENTRY(setjmp)
         movl    %edi,16(%eax)           # save edi          movl    %edi,16(%eax)           # save edi
         movl    (%esp),%edx             # get rta          movl    (%esp),%edx             # get rta
         movl    %edx,20(%eax)           # save eip          movl    %edx,20(%eax)           # save eip
         xorl    %eax,%eax               # return (0);          xorl    %eax,%eax               # return 0
         ret          ret
   
 /* LINTSTUB: Func: void longjmp (label_t *l) */  /*
    * int longjmp(label_t *)
    *
    * Used primarily by DDB.
    */
 ENTRY(longjmp)  ENTRY(longjmp)
         movl    4(%esp),%eax          movl    4(%esp),%eax
         movl    (%eax),%ebx             # restore ebx          movl    (%eax),%ebx             # restore ebx
Line 739  ENTRY(longjmp)
Line 880  ENTRY(longjmp)
         movl    16(%eax),%edi           # restore edi          movl    16(%eax),%edi           # restore edi
         movl    20(%eax),%edx           # get rta          movl    20(%eax),%edx           # get rta
         movl    %edx,(%esp)             # put in return frame          movl    %edx,(%esp)             # put in return frame
         xorl    %eax,%eax               # return (1);          movl    $1,%eax                 # return 1
         incl    %eax  
         ret          ret
   
 /*****************************************************************************/  
   
         .globl  _C_LABEL(uvmexp),_C_LABEL(panic)  
   
 #ifdef DIAGNOSTIC  
 NENTRY(switch_error)  
         pushl   $1f  
         call    _C_LABEL(panic)  
         /* NOTREACHED */  
 1:      .asciz  "cpu_switch"  
 #endif /* DIAGNOSTIC */  
   
 /*  /*
  * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp)   * struct lwp *cpu_switchto(struct lwp *oldlwp, struct newlwp,
    *                          bool returning)
  *   *
  *      1. if (oldlwp != NULL), save its context and call sched_switch_unlock().   *      1. if (oldlwp != NULL), save its context.
  *      2. then, restore context of newlwp.   *      2. then, restore context of newlwp.
  *   *
  * Note that the stack frame layout is known to "struct switchframe"   * Note that the stack frame layout is known to "struct switchframe" in
  * in <machine/frame.h> and to the code in cpu_lwp_fork() which initializes   * <machine/frame.h> and to the code in cpu_lwp_fork() which initializes
  * it for a new lwp.   * it for a new lwp.
  */   */
 ENTRY(cpu_switchto)  ENTRY(cpu_switchto)
Line 772  ENTRY(cpu_switchto)
Line 901  ENTRY(cpu_switchto)
   
         movl    16(%esp),%esi           # oldlwp          movl    16(%esp),%esi           # oldlwp
         movl    20(%esp),%edi           # newlwp          movl    20(%esp),%edi           # newlwp
           movl    24(%esp),%edx           # returning
         testl   %esi,%esi          testl   %esi,%esi
         jz      switch_skipsave          jz      1f
   
         /*  
          * Save old context.  
          */  
   
           /* Save old context. */
         movl    L_ADDR(%esi),%eax          movl    L_ADDR(%esi),%eax
         movl    %esp,PCB_ESP(%eax)          movl    %esp,PCB_ESP(%eax)
         movl    %ebp,PCB_EBP(%eax)          movl    %ebp,PCB_EBP(%eax)
   
 switch_skipsave:          /* Switch to newlwp's stack. */
   1:      movl    L_ADDR(%edi),%ebx
         /*  
          * Switch to newlwp's stack.  
          */  
   
         movl    L_ADDR(%edi),%ebx  
         movl    PCB_EBP(%ebx),%ebp          movl    PCB_EBP(%ebx),%ebp
         movl    PCB_ESP(%ebx),%esp          movl    PCB_ESP(%ebx),%esp
   
         /*          /*
          * Restore the rest of newlwp's context.           * Set curlwp.  This must be globally visible in order to permit
          *           * non-interlocked mutex release.
          * Registers:  
          *   %ebx - new pcb  
          *   %edi - new lwp  
          */           */
           movl    %edi,%ecx
           xchgl   %ecx,CPUVAR(CURLWP)
   
 #if 0          /* Skip the rest if returning to a pinned LWP. */
         /* Don't bother with the rest if switching to a system process. */          testl   %edx,%edx
         testl   $L_SYSTEM,L_FLAG(%edi);          jnz     4f
         jnz     switch_restored  
 #endif  
   
         /* Switch TSS. Reset "task busy" flag before loading. */  #ifdef XEN
         movl    %cr3,%eax          pushl   %edi
         movl    %eax,PCB_CR3(%ebx) /* for TSS gates */          call    _C_LABEL(i386_switch_context)
           addl    $4,%esp
 #ifdef MULTIPROCESSOR  #else /* XEN */
         movl    CPUVAR(GDT),%eax          /* Switch ring0 esp */
 #else          movl    PCB_ESP0(%ebx),%eax
         /* Load TSS info. */          movl    %eax,CPUVAR(ESP0)
         movl    _C_LABEL(gdt),%eax  
 #endif  
         movl    L_MD_TSS_SEL(%edi),%edx  
   
         andl    $~0x0200,4(%eax,%edx, 1)  
         ltr     %dx  
   
 #if 0          /* Don't bother with the rest if switching to a system process. */
 switch_restored:          testl   $LW_SYSTEM,L_FLAG(%edi)
 #endif          jnz     4f
   
         movl    $0,CPUVAR(RESCHED)          /* Restore thread-private %fs/%gs descriptors. */
           movl    CPUVAR(GDT),%ecx
           movl    PCB_FSD(%ebx), %eax
           movl    PCB_FSD+4(%ebx), %edx
           movl    %eax, (GUFS_SEL*8)(%ecx)
           movl    %edx, (GUFS_SEL*8+4)(%ecx)
           movl    PCB_GSD(%ebx), %eax
           movl    PCB_GSD+4(%ebx), %edx
           movl    %eax, (GUGS_SEL*8)(%ecx)
           movl    %edx, (GUGS_SEL*8+4)(%ecx)
   #endif /* XEN */
   
           /* Switch I/O bitmap */
           movl    PCB_IOMAP(%ebx),%eax
           orl     %eax,%eax
           jnz,pn  .Lcopy_iobitmap
           movl    $(IOMAP_INVALOFF << 16),CPUVAR(IOBASE)
   .Liobitmap_done:
   
           /* Is this process using RAS (restartable atomic sequences)? */
           movl    L_PROC(%edi),%eax
           cmpl    $0,P_RASLIST(%eax)
           jne     5f
   
         /* Restore cr0 (including FPU state). */          /*
         cli           * Restore cr0 (including FPU state).  Raise the IPL to IPL_IPI.
            * FPU IPIs can alter the LWP's saved cr0.  Dropping the priority
            * is deferred until mi_switch(), when cpu_switchto() returns.
            */
   2:
   #ifndef XEN
           movl    $IPL_IPI,CPUVAR(ILEVEL)
         movl    PCB_CR0(%ebx),%ecx          movl    PCB_CR0(%ebx),%ecx
 #ifdef MULTIPROCESSOR          movl    %cr0,%edx
   
         /*          /*
          * If our floating point registers are on a different CPU,           * If our floating point registers are on a different CPU,
          * set CR0_TS so we'll trap rather than reuse bogus state.           * set CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%ebx),%eax          movl    PCB_FPCPU(%ebx),%eax
         cmpl    CPUVAR(SELF),%eax          cmpl    CPUVAR(SELF),%eax
         jz      1f          je      3f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
 1:  
 #endif  
         movl    %ecx,%cr0  
   
         /* Interrupts are okay again. */  
         sti  
   
         /*  
          *  Check for restartable atomic sequences (RAS)  
          */  
   
         movl    L_PROC(%edi),%ebx          /* Reloading CR0 is very expensive - avoid if possible. */
         cmpl    $0,P_RASLIST(%ebx)  3:      cmpl    %edx,%ecx
         jne     check_ras          je      4f
           movl    %ecx,%cr0
   #endif /* XEN */
   
 switch_return:          /* Return to the new LWP, returning 'oldlwp' in %eax. */
         movl    %esi,%eax       # return 'oldlwp'  4:      movl    %esi,%eax
         popl    %edi          popl    %edi
         popl    %esi          popl    %esi
         popl    %ebx          popl    %ebx
         ret          ret
   
 check_ras:          /* Check for restartable atomic sequences (RAS). */
         movl    L_MD_REGS(%edi),%ebx  5:      movl    L_MD_REGS(%edi),%ecx
         movl    TF_EIP(%ebx),%eax          pushl   TF_EIP(%ecx)
         pushl   %eax          pushl   %eax
         pushl   %esi  
         call    _C_LABEL(ras_lookup)          call    _C_LABEL(ras_lookup)
         addl    $8,%esp          addl    $8,%esp
         cmpl    $-1,%eax          cmpl    $-1,%eax
         je      switch_return          je      2b
         movl    %eax,TF_EIP(%ebx)          movl    L_MD_REGS(%edi),%ecx
         jmp     switch_return          movl    %eax,TF_EIP(%ecx)
           jmp     2b
   
   .Lcopy_iobitmap:
           /* Copy I/O bitmap. */
           movl    $(IOMAPSIZE/4),%ecx
           pushl   %esi
           pushl   %edi
           movl    %eax,%esi               /* pcb_iomap */
           movl    CPUVAR(SELF),%edi
           leal    CPU_INFO_IOMAP(%edi),%edi
           rep
           movsl
           popl    %edi
           popl    %esi
           movl    $((CPU_INFO_IOMAP - CPU_INFO_TSS) << 16),CPUVAR(IOBASE)
           jmp     .Liobitmap_done
   
 /*  /*
  * void savectx(struct pcb *pcb);   * void savectx(struct pcb *pcb);
    *
  * Update pcb, saving current processor state.   * Update pcb, saving current processor state.
  */   */
 /* LINTSTUB: Func: void savectx(struct pcb *pcb) */  
 ENTRY(savectx)  ENTRY(savectx)
         movl    4(%esp),%edx            # edx = p->p_addr          movl    4(%esp),%edx            # edx = pcb
   
         /* Save stack pointers. */  
         movl    %esp,PCB_ESP(%edx)          movl    %esp,PCB_ESP(%edx)
         movl    %ebp,PCB_EBP(%edx)          movl    %ebp,PCB_EBP(%edx)
   
         ret          ret
   
 /*  /*
    * osyscall()
    *
  * Old call gate entry for syscall   * Old call gate entry for syscall
  */   */
 /* LINTSTUB: Var: char Xosyscall[1]; */  
 IDTVEC(osyscall)  IDTVEC(osyscall)
         /* Set eflags in trap frame. */          pushfl                  # set eflags in trap frame
         pushfl  
         popl    8(%esp)          popl    8(%esp)
         pushl   $7              # size of instruction for restart          pushl   $7              # size of instruction for restart
         jmp     syscall1          jmp     syscall1
   
 /*  /*
    * syscall()
    *
  * Trap gate entry for syscall   * Trap gate entry for syscall
  */   */
 /* LINTSTUB: Var: char Xsyscall[1]; */  
 IDTVEC(syscall)  IDTVEC(syscall)
         pushl   $2              # size of instruction for restart          pushl   $2              # size of instruction for restart
 syscall1:  syscall1:
Line 936  syscall1:
Line 1082  syscall1:
         addl    $4,%esp          addl    $4,%esp
 .Lsyscall_checkast:  .Lsyscall_checkast:
         /* Check for ASTs on exit to user mode. */          /* Check for ASTs on exit to user mode. */
         cli          CLI(%eax)
         CHECK_ASTPENDING(%eax)          CHECK_ASTPENDING(%eax)
         je      1f          je      1f
         /* Always returning to user mode here. */          /* Always returning to user mode here. */
         CLEAR_ASTPENDING(%eax)          CLEAR_ASTPENDING(%eax)
         sti          STI(%eax)
         /* Pushed T_ASTFLT into tf_trapno on entry. */          /* Pushed T_ASTFLT into tf_trapno on entry. */
         pushl   %esp          pushl   %esp
         call    _C_LABEL(trap)          call    _C_LABEL(trap)
         addl    $4,%esp          addl    $4,%esp
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
 1:      CHECK_DEFERRED_SWITCH(%eax)  1:      CHECK_DEFERRED_SWITCH
         jnz     9f          jnz     9f
   #ifdef XEN
           STIC(%eax)
           jz      14f
           call    _C_LABEL(stipending)
           testl   %eax,%eax
           jz      14f
           /* process pending interrupts */
           CLI(%eax)
           movl    CPUVAR(ILEVEL), %ebx
           movl    $.Lsyscall_resume, %esi # address to resume loop at
   .Lsyscall_resume:
           movl    %ebx,%eax       # get cpl
           movl    CPUVAR(IUNMASK)(,%eax,4),%eax
           andl    CPUVAR(IPENDING),%eax   # any non-masked bits left?
           jz      17f
           bsrl    %eax,%eax
           btrl    %eax,CPUVAR(IPENDING)
           movl    CPUVAR(ISOURCES)(,%eax,4),%eax
           jmp     *IS_RESUME(%eax)
   17:     movl    %ebx, CPUVAR(ILEVEL)    #restore cpl
           jmp     .Lsyscall_checkast
   14:
   #endif /* XEN */
 #ifndef DIAGNOSTIC  #ifndef DIAGNOSTIC
         INTRFASTEXIT          INTRFASTEXIT
 #else /* DIAGNOSTIC */  #else /* DIAGNOSTIC */
         cmpl    $IPL_NONE,CPUVAR(ILEVEL)          cmpl    $IPL_NONE,CPUVAR(ILEVEL)
         jne     3f          jne     3f
         INTRFASTEXIT          INTRFASTEXIT
 3:      sti  3:      STI(%eax)
         pushl   $4f          pushl   $4f
         call    _C_LABEL(printf)          call    _C_LABEL(printf)
         addl    $4,%esp          addl    $4,%esp
 #ifdef DDB          pushl   $IPL_NONE
         int     $3          call    _C_LABEL(spllower)
 #endif /* DDB */          addl    $4,%esp
         movl    $IPL_NONE,CPUVAR(ILEVEL)          jmp     .Lsyscall_checkast
         jmp     2b  
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"
 6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"  6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
 9:      sti  9:      STI(%eax)
         call    _C_LABEL(pmap_load)          call    _C_LABEL(pmap_load)
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
   
Line 979  syscall1:
Line 1147  syscall1:
  * latch stuff in probintr() can be moved to npxprobe().   * latch stuff in probintr() can be moved to npxprobe().
  */   */
   
 /* LINTSTUB: Func: void probeintr(void) */  /*
    * void probeintr(void)
    */
 NENTRY(probeintr)  NENTRY(probeintr)
         ss          ss
         incl    _C_LABEL(npx_intrs_while_probing)          incl    _C_LABEL(npx_intrs_while_probing)
Line 992  NENTRY(probeintr)
Line 1162  NENTRY(probeintr)
         popl    %eax          popl    %eax
         iret          iret
   
 /* LINTSTUB: Func: void probetrap(void) */  /*
    * void probetrap(void)
    */
 NENTRY(probetrap)  NENTRY(probetrap)
         ss          ss
         incl    _C_LABEL(npx_traps_while_probing)          incl    _C_LABEL(npx_traps_while_probing)
         fnclex          fnclex
         iret          iret
   
 /* LINTSTUB: Func: int npx586bug1(int a, int b) */  /*
    * int npx586bug1(int a, int b)
    */
 NENTRY(npx586bug1)  NENTRY(npx586bug1)
         fildl   4(%esp)         # x          fildl   4(%esp)         # x
         fildl   8(%esp)         # y          fildl   8(%esp)         # y
Line 1012  NENTRY(npx586bug1)
Line 1186  NENTRY(npx586bug1)
         popl    %eax          popl    %eax
         ret          ret
 #endif /* NNPX > 0 */  #endif /* NNPX > 0 */
   
   /*
    * void sse2_zero_page(void *pg)
    *
    * Zero a page without polluting the cache.
    */
   ENTRY(sse2_zero_page)
           pushl   %ebp
           movl    %esp,%ebp
           movl    8(%esp), %edx
           movl    $PAGE_SIZE, %ecx
           xorl    %eax, %eax
           .align  16
   1:
           movnti  %eax, 0(%edx)
           movnti  %eax, 4(%edx)
           movnti  %eax, 8(%edx)
           movnti  %eax, 12(%edx)
           movnti  %eax, 16(%edx)
           movnti  %eax, 20(%edx)
           movnti  %eax, 24(%edx)
           movnti  %eax, 28(%edx)
           subl    $32, %ecx
           leal    32(%edx), %edx
           jnz     1b
           sfence
           pop     %ebp
           ret
   
   /*
    * void sse2_copy_page(void *src, void *dst)
    *
    * Copy a page without polluting the cache.
    */
   ENTRY(sse2_copy_page)
           pushl   %ebp
           pushl   %ebx
           pushl   %esi
           pushl   %edi
           movl    20(%esp), %esi
           movl    24(%esp), %edi
           movl    $PAGE_SIZE, %ebp
           .align  16
   1:
           movl    0(%esi), %eax
           movl    4(%esi), %ebx
           movl    8(%esi), %ecx
           movl    12(%esi), %edx
           movnti  %eax, 0(%edi)
           movnti  %ebx, 4(%edi)
           movnti  %ecx, 8(%edi)
           movnti  %edx, 12(%edi)
           subl    $16, %ebp
           leal    16(%esi), %esi
           leal    16(%edi), %edi
           jnz     1b
           sfence
           popl    %edi
           popl    %esi
           popl    %ebx
           popl    %ebp
           ret

Legend:
Removed from v.1.45.2.1  
changed lines
  Added in v.1.58.6.5

CVSweb <webmaster@jp.NetBSD.org>