[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.4 and 1.43.4.5

version 1.4, 2002/12/17 20:49:07 version 1.43.4.5, 2007/01/11 22:22:56
Line 1 
Line 1 
 /*      $NetBSD$        */  /*      $NetBSD$        */
   
 /*-  /*-
  * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
  *   *
  * This code is derived from software contributed to The NetBSD Foundation   * This code is derived from software contributed to The NetBSD Foundation
Line 51 
Line 51 
  * 2. Redistributions in binary form must reproduce the above copyright   * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the   *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.   *    documentation and/or other materials provided with the distribution.
  * 3. All advertising materials mentioning features or use of this software   * 3. Neither the name of the University nor the names of its contributors
  *    must display the following acknowledgement:  
  *      This product includes software developed by the University of  
  *      California, Berkeley and its contributors.  
  * 4. Neither the name of the University nor the names of its contributors  
  *    may be used to endorse or promote products derived from this software   *    may be used to endorse or promote products derived from this software
  *    without specific prior written permission.   *    without specific prior written permission.
  *   *
Line 74 
Line 70 
  *      @(#)locore.s    7.3 (Berkeley) 5/13/91   *      @(#)locore.s    7.3 (Berkeley) 5/13/91
  */   */
   
   #include "opt_compat_netbsd.h"
   #include "opt_compat_oldboot.h"
 #include "opt_cputype.h"  #include "opt_cputype.h"
 #include "opt_ddb.h"  #include "opt_ddb.h"
 #include "opt_ipkdb.h"  #include "opt_ipkdb.h"
 #include "opt_vm86.h"  
 #include "opt_user_ldt.h"  
 #include "opt_dummy_nops.h"  
 #include "opt_compat_oldboot.h"  
 #include "opt_multiprocessor.h"  
 #include "opt_lockdebug.h"  #include "opt_lockdebug.h"
   #include "opt_multiprocessor.h"
 #include "opt_realmem.h"  #include "opt_realmem.h"
   #include "opt_user_ldt.h"
   #include "opt_vm86.h"
   
 #include "npx.h"  #include "npx.h"
 #include "assym.h"  #include "assym.h"
 #include "apm.h"  
 #include "lapic.h"  #include "lapic.h"
 #include "ioapic.h"  #include "ioapic.h"
   #include "ksyms.h"
   
 #include <sys/errno.h>  #include <sys/errno.h>
 #include <sys/syscall.h>  #include <sys/syscall.h>
   
 #include <machine/cputypes.h>  #include <machine/cputypes.h>
 #include <machine/param.h>  
 #include <machine/pte.h>  
 #include <machine/segments.h>  #include <machine/segments.h>
 #include <machine/specialreg.h>  #include <machine/specialreg.h>
 #include <machine/trap.h>  #include <machine/trap.h>
 #include <machine/bootinfo.h>  
   
 #if NLAPIC > 0  #if NLAPIC > 0
 #include <machine/i82489reg.h>  #include <machine/i82489reg.h>
 #endif  #endif
   
   #include <machine/multiboot.h>
   
 /* LINTSTUB: include <sys/types.h> */  /* LINTSTUB: include <sys/types.h> */
 /* LINTSTUB: include <machine/cpu.h> */  /* LINTSTUB: include <machine/cpu.h> */
 /* LINTSTUB: include <sys/systm.h> */  /* LINTSTUB: include <sys/systm.h> */
Line 113 
Line 108 
 #include <machine/asm.h>  #include <machine/asm.h>
   
 #if defined(MULTIPROCESSOR)  #if defined(MULTIPROCESSOR)
   
 #define SET_CURPROC(proc,cpu)                           \  #define SET_CURLWP(lwp,cpu)                             \
         movl    CPUVAR(SELF),cpu                ;       \          movl    CPUVAR(SELF),cpu                ;       \
         movl    proc,CPUVAR(CURPROC)    ;       \          movl    lwp,CPUVAR(CURLWP)      ;       \
         movl    cpu,P_CPU(proc)          movl    cpu,L_CPU(lwp)
   
 #else  #else
   
 #define SET_CURPROC(proc,tcpu)          movl    proc,CPUVAR(CURPROC)  #define SET_CURLWP(lwp,tcpu)            movl    lwp,CPUVAR(CURLWP)
 #define GET_CURPROC(reg)                movl    CPUVAR(CURPROC),reg  #define GET_CURLWP(reg)                 movl    CPUVAR(CURLWP),reg
   
 #endif  #endif
   
 #define GET_CURPCB(reg)                 movl    CPUVAR(CURPCB),reg  
 #define SET_CURPCB(reg)                 movl    reg,CPUVAR(CURPCB)  #define SET_CURPCB(reg)                 movl    reg,CPUVAR(CURPCB)
   
 #define CLEAR_RESCHED(reg)              movl    reg,CPUVAR(RESCHED)  #define CLEAR_RESCHED(reg)              movl    reg,CPUVAR(RESCHED)
   
 /* XXX temporary kluge; these should not be here */  /* XXX temporary kluge; these should not be here */
Line 155 
Line 149 
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
 #include <machine/i82489reg.h>  #include <machine/i82489reg.h>
 #endif  #endif
   
 /*  
  * PTmap is recursive pagemap at top of virtual address space.  
  * Within PTmap, the page directory can be found (third indirection).  
  *  
  * XXX 4 == sizeof pde  
  */  
         .set    _C_LABEL(PTmap),(PDSLOT_PTE << PDSHIFT)  
         .set    _C_LABEL(PTD),(_C_LABEL(PTmap) + PDSLOT_PTE * NBPG)  
         .set    _C_LABEL(PTDpde),(_C_LABEL(PTD) + PDSLOT_PTE * 4)  
   
 /*  
  * APTmap, APTD is the alternate recursive pagemap.  
  * It's used when modifying another process's page tables.  
  *  
  * XXX 4 == sizeof pde  
  */  
         .set    _C_LABEL(APTmap),(PDSLOT_APTE << PDSHIFT)  
         .set    _C_LABEL(APTD),(_C_LABEL(APTmap) + PDSLOT_APTE * NBPG)  
         .set    _C_LABEL(APTDpde),(_C_LABEL(PTD) + PDSLOT_APTE * 4)  
   
   
 /*  /*
  * Initialization   * Initialization
Line 183 
Line 156 
         .data          .data
   
         .globl  _C_LABEL(cpu)          .globl  _C_LABEL(cpu)
         .globl  _C_LABEL(cpu_feature)          .globl  _C_LABEL(esym)
         .globl  _C_LABEL(esym),_C_LABEL(boothowto)          .globl  _C_LABEL(atdevbase)
         .globl  _C_LABEL(bootinfo),_C_LABEL(atdevbase)          .globl  _C_LABEL(proc0uarea),_C_LABEL(PDPpaddr)
 #ifdef COMPAT_OLDBOOT  
         .globl  _C_LABEL(bootdev)  
 #endif  
         .globl  _C_LABEL(proc0paddr),_C_LABEL(PTDpaddr)  
         .globl  _C_LABEL(biosbasemem),_C_LABEL(biosextmem)  
         .globl  _C_LABEL(gdt)          .globl  _C_LABEL(gdt)
 #ifdef I586_CPU  #ifdef I586_CPU
         .globl  _C_LABEL(idt)          .globl  _C_LABEL(idt)
 #endif  #endif
         .globl  _C_LABEL(lapic_tpr)          .globl  _C_LABEL(lapic_tpr)
   
 #if NLAPIC > 0  #if NLAPIC > 0
 #ifdef __ELF__  #ifdef __ELF__
         .align  NBPG          .align  PAGE_SIZE
 #else  #else
         .align  12          .align  12
 #endif  #endif
         .globl _C_LABEL(local_apic), _C_LABEL(lapic_id)          .globl _C_LABEL(local_apic), _C_LABEL(lapic_id)
 _C_LABEL(local_apic):  _C_LABEL(local_apic):
         .space  LAPIC_ID          .space  LAPIC_ID
 _C_LABEL(lapic_id):  _C_LABEL(lapic_id):
         .long   0x00000000          .long   0x00000000
         .space  LAPIC_TPRI-(LAPIC_ID+4)          .space  LAPIC_TPRI-(LAPIC_ID+4)
 _C_LABEL(lapic_tpr):  _C_LABEL(lapic_tpr):
         .space  LAPIC_PPRI-LAPIC_TPRI          .space  LAPIC_PPRI-LAPIC_TPRI
 _C_LABEL(lapic_ppr):  _C_LABEL(lapic_ppr):
         .space  LAPIC_ISR-LAPIC_PPRI          .space  LAPIC_ISR-LAPIC_PPRI
 _C_LABEL(lapic_isr):  _C_LABEL(lapic_isr):
         .space  NBPG-LAPIC_ISR          .space  PAGE_SIZE-LAPIC_ISR
 #else  #else
 _C_LABEL(lapic_tpr):  _C_LABEL(lapic_tpr):
         .long 0          .long 0
 #endif  #endif
   
   
 _C_LABEL(cpu):          .long   0       # are we 386, 386sx, or 486,  _C_LABEL(cpu):          .long   0       # are we 386, 386sx, or 486,
                                         #   or Pentium, or..                                          #   or Pentium, or..
 _C_LABEL(cpu_feature):  .long   0       # feature flags from 'cpuid'  
                                         #   instruction  
 _C_LABEL(esym):         .long   0       # ptr to end of syms  
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(proc0paddr):   .long   0  _C_LABEL(proc0uarea):   .long   0
 _C_LABEL(PTDpaddr):     .long   0       # paddr of PTD, for libkvm  _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm
 #ifndef REALBASEMEM  
 _C_LABEL(biosbasemem):  .long   0       # base memory reported by BIOS  
 #else  
 _C_LABEL(biosbasemem):  .long   REALBASEMEM  
 #endif  
 #ifndef REALEXTMEM  
 _C_LABEL(biosextmem):   .long   0       # extended memory reported by BIOS  
 #else  
 _C_LABEL(biosextmem):   .long   REALEXTMEM  
 #endif  
   
         .space 512          .space 512
 tmpstk:  tmpstk:
   
Line 254  tmpstk:
Line 209  tmpstk:
         .globl  start          .globl  start
 start:  movw    $0x1234,0x472                   # warm boot  start:  movw    $0x1234,0x472                   # warm boot
   
         /*  #if defined(MULTIBOOT)
          * Load parameters from stack          jmp     1f
          * (howto, [bootdev], bootinfo, esym, basemem, extmem).  
          */          .align  4
         movl    4(%esp),%eax          .globl  Multiboot_Header
         movl    %eax,RELOC(boothowto)  _C_LABEL(Multiboot_Header):
 #ifdef COMPAT_OLDBOOT  #define MULTIBOOT_HEADER_FLAGS  (MULTIBOOT_HEADER_WANT_MEMORY)
         movl    8(%esp),%eax          .long   MULTIBOOT_HEADER_MAGIC
         movl    %eax,RELOC(bootdev)          .long   MULTIBOOT_HEADER_FLAGS
 #endif          .long   -(MULTIBOOT_HEADER_MAGIC + MULTIBOOT_HEADER_FLAGS)
         movl    12(%esp),%eax  
   
         testl   %eax, %eax  
         jz      1f  
         movl    (%eax), %ebx            /* number of entries */  
         movl    $RELOC(bootinfo), %edi  
         movl    %ebx, (%edi)  
         addl    $4, %edi  
 2:  
         testl   %ebx, %ebx  
         jz      1f  
         addl    $4, %eax  
         movl    (%eax), %ecx            /* address of entry */  
         pushl   %eax  
         pushl   (%ecx)                  /* len */  
         pushl   %ecx  
         pushl   %edi  
         addl    (%ecx), %edi            /* update dest pointer */  
         cmpl    $_RELOC(_C_LABEL(bootinfo) + BOOTINFO_MAXSIZE), %edi  
         jg      2f  
         call    _C_LABEL(memcpy)  
         addl    $12, %esp  
         popl    %eax  
         subl    $1, %ebx  
         jmp     2b  
 2:      /* cleanup for overflow case */  
         addl    $16, %esp  
         movl    $RELOC(bootinfo), %edi  
         subl    %ebx, (%edi)            /* correct number of entries */  
 1:  1:
           /* Check if we are being executed by a Multiboot-compliant boot
            * loader. */
           cmpl    $MULTIBOOT_INFO_MAGIC,%eax
           jne     1f
   
         movl    16(%esp),%eax          /*
         testl   %eax,%eax           * Indeed, a multiboot-compliant boot loader executed us.  We copy
         jz      1f           * the received Multiboot information structure into kernel's data
         addl    $KERNBASE,%eax           * space to process it later -- after we are relocated.  It will
 1:      movl    %eax,RELOC(esym)           * be safer to run complex C code than doing it at this point.
            */
           pushl   %ebx            # Address of Multiboot information
           call    _C_LABEL(multiboot_pre_reloc)
           addl    $4,%esp
           jmp     2f
   #endif
   
         movl    RELOC(biosextmem),%eax  
         testl   %eax,%eax  
         jnz     1f  
         movl    20(%esp),%eax  
         movl    %eax,RELOC(biosextmem)  
 1:  
         movl    RELOC(biosbasemem),%eax  
         testl   %eax,%eax  
         jnz     1f  
         movl    24(%esp),%eax  
         movl    %eax,RELOC(biosbasemem)  
 1:  1:
           /*
            * At this point, we know that a NetBSD-specific boot loader
            * booted this kernel.  The stack carries the following parameters:
            * (boothowto, [bootdev], bootinfo, esym, biosextmem, biosbasemem),
            * 4 bytes each.
            */
           addl    $4,%esp         # Discard return address to boot loader
           call    _C_LABEL(native_loader)
           addl    $24,%esp
   
   2:
         /* First, reset the PSL. */          /* First, reset the PSL. */
         pushl   $PSL_MBO          pushl   $PSL_MBO
         popfl          popfl
Line 503  try586: /* Use the `cpuid' instruction. 
Line 439  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Virtual address space of kernel:   * Virtual address space of kernel:
  *   *
  * text | data | bss | [syms] | page dir | proc0 kstack   * text | data | bss | [syms] | page dir | proc0 kstack
  *                            0          1       2      3   *                            0          1       2      3
  */   */
 #define PROC0PDIR       ((0)              * NBPG)  #define PROC0PDIR       ((0)              * PAGE_SIZE)
 #define PROC0STACK      ((1)              * NBPG)  #define PROC0STACK      ((1)              * PAGE_SIZE)
 #define SYSMAP          ((1+UPAGES)       * NBPG)  #define SYSMAP          ((1+UPAGES)       * PAGE_SIZE)
 #define TABLESIZE       ((1+UPAGES) * NBPG) /* + nkpde * NBPG */  #define TABLESIZE       ((1+UPAGES) * PAGE_SIZE) /* + nkpde * PAGE_SIZE */
   
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
 #if defined(DDB) && !defined(SYMTAB_SPACE)  #if (NKSYMS || defined(DDB) || defined(LKM)) && !defined(SYMTAB_SPACE)
         /* Save the symbols (if loaded). */          /* Save the symbols (if loaded). */
         movl    RELOC(esym),%eax          movl    RELOC(esym),%eax
         testl   %eax,%eax          testl   %eax,%eax
Line 530  try586: /* Use the `cpuid' instruction. 
Line 466  try586: /* Use the `cpuid' instruction. 
   
         /*          /*
          * Calculate the size of the kernel page table directory, and           * Calculate the size of the kernel page table directory, and
          * how many entries it will have.           * how many entries it will have.  Adjust nkpde to the actual
            * kernel size automatically.  Account for the bootstrap tables,
            * round up, and add an extra 4MB.
          */           */
           leal    TABLESIZE+NBPD+PDOFSET(%edi),%eax
           shrl    $PDSHIFT,%eax
         movl    RELOC(nkpde),%ecx               # get nkpde          movl    RELOC(nkpde),%ecx               # get nkpde
         cmpl    $NKPTP_MIN,%ecx                 # larger than min?          cmpl    %ecx,%eax
           jb      1f
           movl    %eax,%ecx
   1:      cmpl    $NKPTP_MIN,%ecx                 # larger than min?
         jge     1f          jge     1f
         movl    $NKPTP_MIN,%ecx                 # set at min          movl    $NKPTP_MIN,%ecx                 # set at min
         jmp     2f          jmp     2f
 1:      cmpl    $NKPTP_MAX,%ecx                 # larger than max?  1:      cmpl    $NKPTP_MAX,%ecx                 # larger than max?
         jle     2f          jle     2f
         movl    $NKPTP_MAX,%ecx          movl    $NKPTP_MAX,%ecx
 2:  2:      movl    %ecx,RELOC(nkpde)
   
         /* Clear memory for bootstrap tables. */          /* Clear memory for bootstrap tables. */
         shll    $PGSHIFT,%ecx          shll    $PGSHIFT,%ecx
Line 561  try586: /* Use the `cpuid' instruction. 
Line 504  try586: /* Use the `cpuid' instruction. 
  */   */
 #define fillkpt         \  #define fillkpt         \
 1:      movl    %eax,(%ebx)     ; \  1:      movl    %eax,(%ebx)     ; \
         addl    $NBPG,%eax      ; /* increment physical address */ \          addl    $PAGE_SIZE,%eax ; /* increment physical address */ \
         addl    $4,%ebx         ; /* next pte */ \          addl    $4,%ebx         ; /* next pte */ \
         loop    1b              ;          loop    1b              ;
   
Line 571  try586: /* Use the `cpuid' instruction. 
Line 514  try586: /* Use the `cpuid' instruction. 
         /* Calculate end of text segment, rounded to a page. */          /* Calculate end of text segment, rounded to a page. */
         leal    (RELOC(etext)+PGOFSET),%edx          leal    (RELOC(etext)+PGOFSET),%edx
         andl    $~PGOFSET,%edx          andl    $~PGOFSET,%edx
   
         /* Skip over the first 1MB. */          /* Skip over the first 1MB. */
         movl    $_RELOC(KERNTEXTOFF),%eax          movl    $_RELOC(KERNTEXTOFF),%eax
         movl    %eax,%ecx          movl    %eax,%ecx
Line 619  try586: /* Use the `cpuid' instruction. 
Line 562  try586: /* Use the `cpuid' instruction. 
         leal    (PROC0PDIR+PG_V|PG_KW)(%esi),%eax       # pte for ptd          leal    (PROC0PDIR+PG_V|PG_KW)(%esi),%eax       # pte for ptd
         movl    %eax,(PROC0PDIR+PDSLOT_PTE*4)(%esi)     # recursive PD slot          movl    %eax,(PROC0PDIR+PDSLOT_PTE*4)(%esi)     # recursive PD slot
   
         /* Save phys. addr of PTD, for libkvm. */          /* Save phys. addr of PDP, for libkvm. */
         movl    %esi,RELOC(PTDpaddr)          movl    %esi,RELOC(PDPpaddr)
   
         /* Load base of page directory and enable mapping. */          /* Load base of page directory and enable mapping. */
         movl    %esi,%eax               # phys address of ptd in proc 0          movl    %esi,%eax               # phys address of ptd in proc 0
Line 651  begin:
Line 594  begin:
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (PROC0STACK+KERNBASE)(%esi),%eax          leal    (PROC0STACK+KERNBASE)(%esi),%eax
         movl    %eax,_C_LABEL(proc0paddr)          movl    %eax,_C_LABEL(proc0uarea)
         leal    (USPACE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
         movl    %esi,PCB_CR3(%eax)      # pcb->pcb_cr3          movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3
         xorl    %ebp,%ebp               # mark end of frames          xorl    %ebp,%ebp               # mark end of frames
   
   #if defined(MULTIBOOT)
           /* It is now safe to parse the Multiboot information structure
            * we saved before from C code.  Note that we cannot delay its
            * parsing any more because initgdt (called below) needs to make
            * use of this information. */
           call    _C_LABEL(multiboot_post_reloc)
   #endif
   
         subl    $NGDT*8, %esp           # space for temporary gdt          subl    $NGDT*8, %esp           # space for temporary gdt
         pushl   %esp          pushl   %esp
         call    _C_LABEL(initgdt)          call    _C_LABEL(initgdt)
         addl    $4,%esp          addl    $4,%esp
   
         movl    _C_LABEL(nkpde),%eax          movl    _C_LABEL(nkpde),%eax
         shll    $PGSHIFT,%eax          shll    $PGSHIFT,%eax
         addl    $TABLESIZE,%eax          addl    $TABLESIZE,%eax
Line 707  NENTRY(proc_trampoline)
Line 658  NENTRY(proc_trampoline)
         pushl   %ebx          pushl   %ebx
         call    *%esi          call    *%esi
         addl    $4,%esp          addl    $4,%esp
           DO_DEFERRED_SWITCH(%eax)
         INTRFASTEXIT          INTRFASTEXIT
         /* NOTREACHED */          /* NOTREACHED */
   
 /*****************************************************************************/  /*****************************************************************************/
   #ifdef COMPAT_16
 /*  /*
  * Signal trampoline; copied to top of user stack.   * Signal trampoline; copied to top of user stack.
  */   */
Line 724  NENTRY(sigcode)
Line 676  NENTRY(sigcode)
         leal    12(%esp),%eax           # get pointer to sigcontext          leal    12(%esp),%eax           # get pointer to sigcontext
         movl    %eax,4(%esp)            # put it in the argument slot          movl    %eax,4(%esp)            # put it in the argument slot
                                         # fake return address already there                                          # fake return address already there
         movl    $SYS___sigreturn14,%eax          movl    $SYS_compat_16___sigreturn14,%eax
         int     $0x80                   # enter kernel with args on stack          int     $0x80                   # enter kernel with args on stack
         movl    $SYS_exit,%eax          movl    $SYS_exit,%eax
         int     $0x80                   # exit if sigreturn fails          int     $0x80                   # exit if sigreturn fails
         .globl  _C_LABEL(esigcode)          .globl  _C_LABEL(esigcode)
 _C_LABEL(esigcode):  _C_LABEL(esigcode):
   
 /*****************************************************************************/  
   
 /*  
  * The following primitives are used to fill and copy regions of memory.  
  */  
   
 /*  
  * XXX No section 9 man page for fillw.  
  * fillw seems to be very sparsely used (only in pccons it seems.)  
  * One wonders if it couldn't be done without.  
  * -- Perry Metzger, May 7, 2001  
  */  
 /*  
  * void fillw(short pattern, void *addr, size_t len);  
  * Write len copies of pattern at addr.  
  */  
 /* LINTSTUB: Func: void fillw(short pattern, void *addr, size_t len) */  
 ENTRY(fillw)  
         pushl   %edi  
         movl    8(%esp),%eax  
         movl    12(%esp),%edi  
         movw    %ax,%cx  
         rorl    $16,%eax  
         movw    %cx,%ax  
         cld  
         movl    16(%esp),%ecx  
         shrl    %ecx                    # do longwords  
         rep  
         stosl  
         movl    16(%esp),%ecx  
         andl    $1,%ecx                 # do remainder  
         rep  
         stosw  
         popl    %edi  
         ret  
   
 /*  
  * int kcopy(const void *from, void *to, size_t len);  
  * Copy len bytes, abort on fault.  
  */  
 /* LINTSTUB: Func: int kcopy(const void *from, void *to, size_t len) */  
 ENTRY(kcopy)  
         pushl   %esi  
         pushl   %edi  
         GET_CURPCB(%eax)                # load curpcb into eax and set on-fault  
         pushl   PCB_ONFAULT(%eax)  
         movl    $_C_LABEL(copy_fault), PCB_ONFAULT(%eax)  
   
         movl    16(%esp),%esi  
         movl    20(%esp),%edi  
         movl    24(%esp),%ecx  
         movl    %edi,%eax  
         subl    %esi,%eax  
         cmpl    %ecx,%eax               # overlapping?  
         jb      1f  
         cld                             # nope, copy forward  
         shrl    $2,%ecx                 # copy by 32-bit words  
         rep  
         movsl  
         movl    24(%esp),%ecx  
         andl    $3,%ecx                 # any bytes left?  
         rep  
         movsb  
   
         GET_CURPCB(%edx)                # XXX save curpcb?  
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         xorl    %eax,%eax  
         ret  
   
         ALIGN_TEXT  
 1:      addl    %ecx,%edi               # copy backward  
         addl    %ecx,%esi  
         std  
         andl    $3,%ecx                 # any fractional bytes?  
         decl    %edi  
         decl    %esi  
         rep  
         movsb  
         movl    24(%esp),%ecx           # copy remainder by 32-bit words  
         shrl    $2,%ecx  
         subl    $3,%esi  
         subl    $3,%edi  
         rep  
         movsl  
         cld  
   
         GET_CURPCB(%edx)  
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         xorl    %eax,%eax  
         ret  
   
 /*****************************************************************************/  
   
 /*  
  * The following primitives are used to copy data in and out of the user's  
  * address space.  
  */  
   
 /*  
  * Default to the lowest-common-denominator.  We will improve it  
  * later.  
  */  
 #if defined(I386_CPU)  
 #define DEFAULT_COPYOUT         _C_LABEL(i386_copyout)  
 #define DEFAULT_COPYIN          _C_LABEL(i386_copyin)  
 #elif defined(I486_CPU)  
 #define DEFAULT_COPYOUT         _C_LABEL(i486_copyout)  
 #define DEFAULT_COPYIN          _C_LABEL(i386_copyin)  
 #elif defined(I586_CPU)  
 #define DEFAULT_COPYOUT         _C_LABEL(i486_copyout)  /* XXX */  
 #define DEFAULT_COPYIN          _C_LABEL(i386_copyin)   /* XXX */  
 #elif defined(I686_CPU)  
 #define DEFAULT_COPYOUT         _C_LABEL(i486_copyout)  /* XXX */  
 #define DEFAULT_COPYIN          _C_LABEL(i386_copyin)   /* XXX */  
 #endif  
   
         .data  
   
         .globl  _C_LABEL(copyout_func)  
 _C_LABEL(copyout_func):  
         .long   DEFAULT_COPYOUT  
   
         .globl  _C_LABEL(copyin_func)  
 _C_LABEL(copyin_func):  
         .long   DEFAULT_COPYIN  
   
         .text  
   
 /*  
  * int copyout(const void *from, void *to, size_t len);  
  * Copy len bytes into the user's address space.  
  * see copyout(9)  
  */  
 /* LINTSTUB: Func: int copyout(const void *kaddr, void *uaddr, size_t len) */  
 ENTRY(copyout)  
         jmp     *_C_LABEL(copyout_func)  
   
 #if defined(I386_CPU)  
 /* LINTSTUB: Func: int i386_copyout(const void *kaddr, void *uaddr, size_t len) */  
 ENTRY(i386_copyout)  
         pushl   %esi  
         pushl   %edi  
         pushl   $0  
   
         movl    16(%esp),%esi  
         movl    20(%esp),%edi  
         movl    24(%esp),%eax  
   
         /*  
          * We check that the end of the destination buffer is not past the end  
          * of the user's address space.  If it's not, then we only need to  
          * check that each page is writable.  The 486 will do this for us; the  
          * 386 will not.  (We assume that pages in user space that are not  
          * writable by the user are not writable by the kernel either.)  
          */  
         movl    %edi,%edx  
         addl    %eax,%edx  
         jc      _C_LABEL(copy_efault)  
         cmpl    $VM_MAXUSER_ADDRESS,%edx  
         ja      _C_LABEL(copy_efault)  
   
         testl   %eax,%eax               # anything to do?  
         jz      3f  
   
         /*  
          * We have to check each PTE for (write) permission, since the CPU  
          * doesn't do it for us.  
          */  
   
         /* Compute number of pages. */  
         movl    %edi,%ecx  
         andl    $PGOFSET,%ecx  
         addl    %eax,%ecx  
         decl    %ecx  
         shrl    $PGSHIFT,%ecx  
   
         /* Compute PTE offset for start address. */  
         shrl    $PGSHIFT,%edi  
   
         GET_CURPCB(%edx)  
         movl    $2f,PCB_ONFAULT(%edx)  
   
 1:      /* Check PTE for each page. */  
         testb   $PG_RW,_C_LABEL(PTmap)(,%edi,4)  
         jz      2f  
   
 4:      incl    %edi  
         decl    %ecx  
         jns     1b  
   
         movl    20(%esp),%edi  
         movl    24(%esp),%eax  
         jmp     3f  
   
 2:      /* Simulate a trap. */  
         pushl   %ecx  
         movl    %edi,%eax  
         shll    $PGSHIFT,%eax  
         pushl   %eax  
         call    _C_LABEL(trapwrite)     # trapwrite(addr)  
         addl    $4,%esp                 # pop argument  
         popl    %ecx  
         testl   %eax,%eax               # if not ok, return EFAULT  
         jz      4b  
         jmp     _C_LABEL(copy_efault)  
   
 3:      GET_CURPCB(%edx)  
         movl    $_C_LABEL(copy_fault),PCB_ONFAULT(%edx)  
   
         /* bcopy(%esi, %edi, %eax); */  
         cld  
         movl    %eax,%ecx  
         shrl    $2,%ecx  
         rep  
         movsl  
         movl    %eax,%ecx  
         andl    $3,%ecx  
         rep  
         movsb  
   
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         xorl    %eax,%eax  
         ret  
 #endif /* I386_CPU */  
   
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
 /* LINTSTUB: Func: int i486_copyout(const void *kaddr, void *uaddr, size_t len) */  
 ENTRY(i486_copyout)  
         pushl   %esi  
         pushl   %edi  
         pushl   $0  
   
         movl    16(%esp),%esi  
         movl    20(%esp),%edi  
         movl    24(%esp),%eax  
   
         /*  
          * We check that the end of the destination buffer is not past the end  
          * of the user's address space.  
          */  
         movl    %edi,%edx  
         addl    %eax,%edx  
         jc      _C_LABEL(copy_efault)  
         cmpl    $VM_MAXUSER_ADDRESS,%edx  
         ja      _C_LABEL(copy_efault)  
   
         GET_CURPCB(%edx)  
         movl    $_C_LABEL(copy_fault),PCB_ONFAULT(%edx)  
   
         /* bcopy(%esi, %edi, %eax); */  
         cld  
         movl    %eax,%ecx  
         shrl    $2,%ecx  
         rep  
         movsl  
         movl    %eax,%ecx  
         andl    $3,%ecx  
         rep  
         movsb  
   
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         xorl    %eax,%eax  
         ret  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
 /*  
  * int copyin(const void *from, void *to, size_t len);  
  * Copy len bytes from the user's address space.  
  * see copyin(9)  
  */  
 /* LINTSTUB: Func: int copyin(const void *uaddr, void *kaddr, size_t len) */  
 ENTRY(copyin)  
         jmp     *_C_LABEL(copyin_func)  
   
 #if defined(I386_CPU) || defined(I486_CPU) || defined(I586_CPU) || \  
     defined(I686_CPU)  
 /* LINTSTUB: Func: int i386_copyin(const void *uaddr, void *kaddr, size_t len) */  
 ENTRY(i386_copyin)  
         pushl   %esi  
         pushl   %edi  
         GET_CURPCB(%eax)  
         pushl   $0  
         movl    $_C_LABEL(copy_fault),PCB_ONFAULT(%eax)  
   
         movl    16(%esp),%esi  
         movl    20(%esp),%edi  
         movl    24(%esp),%eax  
   
         /*  
          * We check that the end of the destination buffer is not past the end  
          * of the user's address space.  If it's not, then we only need to  
          * check that each page is readable, and the CPU will do that for us.  
          */  
         movl    %esi,%edx  
         addl    %eax,%edx  
         jc      _C_LABEL(copy_efault)  
         cmpl    $VM_MAXUSER_ADDRESS,%edx  
         ja      _C_LABEL(copy_efault)  
   
         /* bcopy(%esi, %edi, %eax); */  
         cld  
         movl    %eax,%ecx  
         shrl    $2,%ecx  
         rep  
         movsl  
         movl    %eax,%ecx  
         andl    $3,%ecx  
         rep  
         movsb  
   
         GET_CURPCB(%edx)  
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         xorl    %eax,%eax  
         ret  
 #endif /* I386_CPU || I486_CPU || I586_CPU || I686_CPU */  
   
 /* LINTSTUB: Ignore */  
 NENTRY(copy_efault)  
         movl    $EFAULT,%eax  
   
 /* LINTSTUB: Ignore */  
 NENTRY(copy_fault)  
         GET_CURPCB(%edx)  
         popl    PCB_ONFAULT(%edx)  
         popl    %edi  
         popl    %esi  
         ret  
   
 /*  
  * int copyoutstr(const void *from, void *to, size_t maxlen, size_t *lencopied);  
  * Copy a NUL-terminated string, at most maxlen characters long, into the  
  * user's address space.  Return the number of characters copied (including the  
  * NUL) in *lencopied.  If the string is too long, return ENAMETOOLONG; else  
  * return 0 or EFAULT.  
  * see copyoutstr(9)  
  */  
 /* LINTSTUB: Func: int copyoutstr(const void *kaddr, void *uaddr, size_t len, size_t *done) */  
 ENTRY(copyoutstr)  
         pushl   %esi  
         pushl   %edi  
   
         movl    12(%esp),%esi           # esi = from  
         movl    16(%esp),%edi           # edi = to  
         movl    20(%esp),%edx           # edx = maxlen  
   
 #if defined(I386_CPU)  
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
         cmpl    $CPUCLASS_386,_C_LABEL(cpu_class)  
         jne     5f  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
         /* Compute number of bytes in first page. */  
         movl    %edi,%eax  
         andl    $PGOFSET,%eax  
         movl    $NBPG,%ecx  
         subl    %eax,%ecx               # ecx = NBPG - (src % NBPG)  
   
         GET_CURPCB(%eax)  
         movl    $6f,PCB_ONFAULT(%eax)  
   
 1:      /*  
          * Once per page, check that we are still within the bounds of user  
          * space, and check for a write fault.  
          */  
         cmpl    $VM_MAXUSER_ADDRESS,%edi  
         jae     _C_LABEL(copystr_efault)  
   
         /* Compute PTE offset. */  
         movl    %edi,%eax  
         shrl    $PGSHIFT,%eax           # calculate pte address  
   
         testb   $PG_RW,_C_LABEL(PTmap)(,%eax,4)  
         jnz     2f  
   
 6:      /* Simulate a trap. */  
         pushl   %edx  
         pushl   %edi  
         call    _C_LABEL(trapwrite)     # trapwrite(addr)  
         addl    $4,%esp                 # clear argument from stack  
         popl    %edx  
         testl   %eax,%eax  
         jnz     _C_LABEL(copystr_efault)  
   
 2:      /* Copy up to end of this page. */  
         subl    %ecx,%edx               # predecrement total count  
         jnc     3f  
         addl    %edx,%ecx               # ecx += (edx - ecx) = edx  
         xorl    %edx,%edx  
   
 3:      decl    %ecx  
         js      4f  
         lodsb  
         stosb  
         testb   %al,%al  
         jnz     3b  
   
         /* Success -- 0 byte reached. */  
         addl    %ecx,%edx               # add back residual for this page  
         xorl    %eax,%eax  
         jmp     copystr_return  
   
 4:      /* Go to next page, if any. */  
         movl    $NBPG,%ecx  
         testl   %edx,%edx  
         jnz     1b  
   
         /* edx is zero -- return ENAMETOOLONG. */  
         movl    $ENAMETOOLONG,%eax  
         jmp     copystr_return  
 #endif /* I386_CPU */  
   
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
 5:      GET_CURPCB(%eax)  
         movl    $_C_LABEL(copystr_fault),PCB_ONFAULT(%eax)  
         /*  
          * Get min(%edx, VM_MAXUSER_ADDRESS-%edi).  
          */  
         movl    $VM_MAXUSER_ADDRESS,%eax  
         subl    %edi,%eax  
         cmpl    %edx,%eax  
         jae     1f  
         movl    %eax,%edx  
         movl    %eax,20(%esp)  
   
 1:      incl    %edx  
         cld  
   
 1:      decl    %edx  
         jz      2f  
         lodsb  
         stosb  
         testb   %al,%al  
         jnz     1b  
   
         /* Success -- 0 byte reached. */  
         decl    %edx  
         xorl    %eax,%eax  
         jmp     copystr_return  
   
 2:      /* edx is zero -- return EFAULT or ENAMETOOLONG. */  
         cmpl    $VM_MAXUSER_ADDRESS,%edi  
         jae     _C_LABEL(copystr_efault)  
         movl    $ENAMETOOLONG,%eax  
         jmp     copystr_return  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
 /*  
  * int copyinstr(const void *from, void *to, size_t maxlen, size_t *lencopied);  
  * Copy a NUL-terminated string, at most maxlen characters long, from the  
  * user's address space.  Return the number of characters copied (including the  
  * NUL) in *lencopied.  If the string is too long, return ENAMETOOLONG; else  
  * return 0 or EFAULT.  
  * see copyinstr(9)  
  */  
 /* LINTSTUB: Func: int copyinstr(const void *uaddr, void *kaddr, size_t len, size_t *done) */  
 ENTRY(copyinstr)  
         pushl   %esi  
         pushl   %edi  
         GET_CURPCB(%ecx)  
         movl    $_C_LABEL(copystr_fault),PCB_ONFAULT(%ecx)  
   
         movl    12(%esp),%esi           # %esi = from  
         movl    16(%esp),%edi           # %edi = to  
         movl    20(%esp),%edx           # %edx = maxlen  
   
         /*  
          * Get min(%edx, VM_MAXUSER_ADDRESS-%esi).  
          */  
         movl    $VM_MAXUSER_ADDRESS,%eax  
         subl    %esi,%eax  
         cmpl    %edx,%eax  
         jae     1f  
         movl    %eax,%edx  
         movl    %eax,20(%esp)  
   
 1:      incl    %edx  
         cld  
   
 1:      decl    %edx  
         jz      2f  
         lodsb  
         stosb  
         testb   %al,%al  
         jnz     1b  
   
         /* Success -- 0 byte reached. */  
         decl    %edx  
         xorl    %eax,%eax  
         jmp     copystr_return  
   
 2:      /* edx is zero -- return EFAULT or ENAMETOOLONG. */  
         cmpl    $VM_MAXUSER_ADDRESS,%esi  
         jae     _C_LABEL(copystr_efault)  
         movl    $ENAMETOOLONG,%eax  
         jmp     copystr_return  
   
 /* LINTSTUB: Ignore */  
 NENTRY(copystr_efault)  
         movl    $EFAULT,%eax  
   
 /* LINTSTUB: Ignore */  
 NENTRY(copystr_fault)  
 copystr_return:  
         /* Set *lencopied and return %eax. */  
         GET_CURPCB(%ecx)  
         movl    $0,PCB_ONFAULT(%ecx)  
         movl    20(%esp),%ecx  
         subl    %edx,%ecx  
         movl    24(%esp),%edx  
         testl   %edx,%edx  
         jz      8f  
         movl    %ecx,(%edx)  
   
 8:      popl    %edi  
         popl    %esi  
         ret  
   
 /*  
  * int copystr(const void *from, void *to, size_t maxlen, size_t *lencopied);  
  * Copy a NUL-terminated string, at most maxlen characters long.  Return the  
  * number of characters copied (including the NUL) in *lencopied.  If the  
  * string is too long, return ENAMETOOLONG; else return 0.  
  * see copystr(9)  
  */  
 /* LINTSTUB: Func: int copystr(const void *kfaddr, void *kdaddr, size_t len, size_t *done) */  
 ENTRY(copystr)  
         pushl   %esi  
         pushl   %edi  
   
         movl    12(%esp),%esi           # esi = from  
         movl    16(%esp),%edi           # edi = to  
         movl    20(%esp),%edx           # edx = maxlen  
         incl    %edx  
         cld  
   
 1:      decl    %edx  
         jz      4f  
         lodsb  
         stosb  
         testb   %al,%al  
         jnz     1b  
   
         /* Success -- 0 byte reached. */  
         decl    %edx  
         xorl    %eax,%eax  
         jmp     6f  
   
 4:      /* edx is zero -- return ENAMETOOLONG. */  
         movl    $ENAMETOOLONG,%eax  
   
 6:      /* Set *lencopied and return %eax. */  
         movl    20(%esp),%ecx  
         subl    %edx,%ecx  
         movl    24(%esp),%edx  
         testl   %edx,%edx  
         jz      7f  
         movl    %ecx,(%edx)  
   
 7:      popl    %edi  
         popl    %esi  
         ret  
   
 /*  
  * long fuword(const void *uaddr);  
  * Fetch an int from the user's address space.  
  * see fuword(9)  
  */  
 /* LINTSTUB: Func: long fuword(const void *base) */  
 ENTRY(fuword)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-4,%edx  
         ja      _C_LABEL(fusuaddrfault)  
         GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
         movl    (%edx),%eax  
         movl    $0,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int fusword(const void *uaddr);  
  * Fetch a short from the user's address space.  
  * see fusword(9)  
  */  
 /* LINTSTUB: Func: int fusword(const void *base) */  
 ENTRY(fusword)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-2,%edx  
         ja      _C_LABEL(fusuaddrfault)  
         GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
         movzwl  (%edx),%eax  
         movl    $0,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int fuswintr(const void *uaddr);  
  * Fetch a short from the user's address space.  Can be called during an  
  * interrupt.  
  * see fuswintr(9)  
  */  
 /* LINTSTUB: Func: int fuswintr(const void *base) */  
 ENTRY(fuswintr)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-2,%edx  
         ja      _C_LABEL(fusuaddrfault)  
         movl    CPUVAR(CURPROC),%ecx  
         movl    P_ADDR(%ecx),%ecx  
         movl    $_C_LABEL(fusubail),PCB_ONFAULT(%ecx)  
         movzwl  (%edx),%eax  
         movl    $0,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int fubyte(const void *uaddr);  
  * Fetch a byte from the user's address space.  
  * see fubyte(9)  
  */  
 /* LINTSTUB: Func: int fubyte(const void *base) */  
 ENTRY(fubyte)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-1,%edx  
         ja      _C_LABEL(fusuaddrfault)  
         GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
         movzbl  (%edx),%eax  
         movl    $0,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * Handle faults from [fs]u*().  Clean up and return -1.  
  */  
 /* LINTSTUB: Ignore */  
 NENTRY(fusufault)  
         movl    $0,PCB_ONFAULT(%ecx)  
         movl    $-1,%eax  
         ret  
   
 /*  
  * Handle faults from [fs]u*().  Clean up and return -1.  This differs from  
  * fusufault() in that trap() will recognize it and return immediately rather  
  * than trying to page fault.  
  */  
 /* LINTSTUB: Ignore */  
 NENTRY(fusubail)  
         movl    $0,PCB_ONFAULT(%ecx)  
         movl    $-1,%eax  
         ret  
   
 /*  
  * Handle earlier faults from [fs]u*(), due to our of range addresses.  
  */  
 /* LINTSTUB: Ignore */  
 NENTRY(fusuaddrfault)  
         movl    $-1,%eax  
         ret  
   
 /*  
  * int suword(void *uaddr, long x);  
  * Store an int in the user's address space.  
  * see suword(9)  
  */  
 /* LINTSTUB: Func: int suword(void *base, long c) */  
 ENTRY(suword)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-4,%edx  
         ja      _C_LABEL(fusuaddrfault)  
   
 #if defined(I386_CPU)  
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
         cmpl    $CPUCLASS_386,_C_LABEL(cpu_class)  
         jne     2f  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
         GET_CURPCB(%eax)  
         movl    $3f,PCB_ONFAULT(%eax)  
   
         movl    %edx,%eax  
         shrl    $PGSHIFT,%eax           # calculate pte address  
         testb   $PG_RW,_C_LABEL(PTmap)(,%eax,4)  
         jnz     1f  
   
 3:      /* Simulate a trap. */  
         pushl   %edx  
         pushl   %edx  
         call    _C_LABEL(trapwrite)     # trapwrite(addr)  
         addl    $4,%esp                 # clear parameter from the stack  
         popl    %edx  
         GET_CURPCB(%ecx)  
         testl   %eax,%eax  
         jnz     _C_LABEL(fusufault)  
   
 1:      /* XXX also need to check the following 3 bytes for validity! */  
 #endif  
   
 2:      GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
   
         movl    8(%esp),%eax  
         movl    %eax,(%edx)  
         xorl    %eax,%eax  
         movl    %eax,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int susword(void *uaddr, short x);  
  * Store a short in the user's address space.  
  * see susword(9)  
  */  
 /* LINTSTUB: Func: int susword(void *base, short c) */  
 ENTRY(susword)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-2,%edx  
         ja      _C_LABEL(fusuaddrfault)  
   
 #if defined(I386_CPU)  
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
         cmpl    $CPUCLASS_386,_C_LABEL(cpu_class)  
         jne     2f  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
         GET_CURPCB(%eax)  
         movl    $3f,PCB_ONFAULT(%eax)  
   
         movl    %edx,%eax  
         shrl    $PGSHIFT,%eax           # calculate pte address  
         testb   $PG_RW,_C_LABEL(PTmap)(,%eax,4)  
         jnz     1f  
   
 3:      /* Simulate a trap. */  
         pushl   %edx  
         pushl   %edx  
         call    _C_LABEL(trapwrite)     # trapwrite(addr)  
         addl    $4,%esp                 # clear parameter from the stack  
         popl    %edx  
         GET_CURPCB(%ecx)  
         testl   %eax,%eax  
         jnz     _C_LABEL(fusufault)  
   
 1:      /* XXX also need to check the following byte for validity! */  
 #endif  
   
 2:      GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
   
         movl    8(%esp),%eax  
         movw    %ax,(%edx)  
         xorl    %eax,%eax  
         movl    %eax,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int suswintr(void *uaddr, short x);  
  * Store a short in the user's address space.  Can be called during an  
  * interrupt.  
  * see suswintr(9)  
  */  
 /* LINTSTUB: Func: int suswintr(void *base, short c) */  
 ENTRY(suswintr)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-2,%edx  
         ja      _C_LABEL(fusuaddrfault)  
         movl    CPUVAR(CURPROC),%ecx  
         movl    P_ADDR(%ecx),%ecx  
         movl    $_C_LABEL(fusubail),PCB_ONFAULT(%ecx)  
   
 #if defined(I386_CPU)  
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
         cmpl    $CPUCLASS_386,_C_LABEL(cpu_class)  
         jne     2f  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
         movl    %edx,%eax  
         shrl    $PGSHIFT,%eax           # calculate pte address  
         testb   $PG_RW,_C_LABEL(PTmap)(,%eax,4)  
         jnz     1f  
   
         /* Simulate a trap. */  
         jmp     _C_LABEL(fusubail)  
   
 1:      /* XXX also need to check the following byte for validity! */  
 #endif  
   
 2:      movl    8(%esp),%eax  
         movw    %ax,(%edx)  
         xorl    %eax,%eax  
         movl    %eax,PCB_ONFAULT(%ecx)  
         ret  
   
 /*  
  * int subyte(void *uaddr, char x);  
  * Store a byte in the user's address space.  
  * see subyte(9)  
  */  
 /* LINTSTUB: Func: int subyte(void *base, int c) */  
 ENTRY(subyte)  
         movl    4(%esp),%edx  
         cmpl    $VM_MAXUSER_ADDRESS-1,%edx  
         ja      _C_LABEL(fusuaddrfault)  
   
 #if defined(I386_CPU)  
 #if defined(I486_CPU) || defined(I586_CPU) || defined(I686_CPU)  
         cmpl    $CPUCLASS_386,_C_LABEL(cpu_class)  
         jne     2f  
 #endif /* I486_CPU || I586_CPU || I686_CPU */  
   
         GET_CURPCB(%eax)  
         movl    $3f,PCB_ONFAULT(%eax)  
   
         movl    %edx,%eax  
         shrl    $PGSHIFT,%eax           # calculate pte address  
         testb   $PG_RW,_C_LABEL(PTmap)(,%eax,4)  
         jnz     1f  
   
 3:      /* Simulate a trap. */  
         pushl   %edx  
         pushl   %edx  
         call    _C_LABEL(trapwrite)     # trapwrite(addr)  
         addl    $4,%esp                 # clear parameter from the stack  
         popl    %edx  
         GET_CURPCB(%ecx)  
         testl   %eax,%eax  
         jnz     _C_LABEL(fusufault)  
   
 1:  
 #endif  #endif
   
 2:      GET_CURPCB(%ecx)  
         movl    $_C_LABEL(fusufault),PCB_ONFAULT(%ecx)  
   
         movb    8(%esp),%al  
         movb    %al,(%edx)  
         xorl    %eax,%eax  
         movl    %eax,PCB_ONFAULT(%ecx)  
         ret  
   
 /*****************************************************************************/  /*****************************************************************************/
   
 /*  /*
Line 1659  NENTRY(switch_error)
Line 767  NENTRY(switch_error)
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
   
 /*  /*
  * void cpu_switch(struct proc *)   * void cpu_switch(struct lwp *)
  * Find a runnable process and switch to it.  Wait if necessary.  If the new   * Find a runnable lwp and switch to it.  Wait if necessary.  If the new
  * process is the same as the old one, we short-circuit the context save and   * lwp is the same as the old one, we short-circuit the context save and
  * restore.   * restore.
  *   *
  * Note that the stack frame layout is known to "struct switchframe"   * Note that the stack frame layout is known to "struct switchframe"
  * in <machine/frame.h> and to the code in cpu_fork() which initializes   * in <machine/frame.h> and to the code in cpu_fork() which initializes
  * it for a new process.   * it for a new lwp.
  */   */
 ENTRY(cpu_switch)  ENTRY(cpu_switch)
         pushl   %ebx          pushl   %ebx
Line 1676  ENTRY(cpu_switch)
Line 784  ENTRY(cpu_switch)
 #ifdef DEBUG  #ifdef DEBUG
         cmpl    $IPL_SCHED,CPUVAR(ILEVEL)          cmpl    $IPL_SCHED,CPUVAR(ILEVEL)
         jae     1f          jae     1f
         pushl   2f          pushl   $2f
         call    _C_LABEL(panic)          call    _C_LABEL(panic)
         /* NOTREACHED */          /* NOTREACHED */
 2:      .asciz  "not splhigh() in cpu_switch!"  2:      .asciz  "not splsched() in cpu_switch!"
   1:
 1:  
 #endif /* DEBUG */  #endif /* DEBUG */
   
         movl    CPUVAR(CURPROC),%esi          movl    16(%esp),%esi           # current
   
         /*          /*
          * Clear curproc so that we don't accumulate system time while idle.           * Clear curlwp so that we don't accumulate system time while idle.
          * This also insures that schedcpu() will move the old process to           * This also insures that schedcpu() will move the old lwp to
          * the correct queue if it happens to get called from the spllower()           * the correct queue if it happens to get called from the spllower()
          * below and changes the priority.  (See corresponding comment in           * below and changes the priority.  (See corresponding comment in
          * userret()).           * userret()).
          */           */
         movl    $0,CPUVAR(CURPROC)          movl    $0,CPUVAR(CURLWP)
         /*          /*
          * First phase: find new process.           * First phase: find new lwp.
          *           *
          * Registers:           * Registers:
          *   %eax - queue head, scratch, then zero           *   %eax - queue head, scratch, then zero
          *   %ebx - queue number           *   %ebx - queue number
          *   %ecx - cached value of whichqs           *   %ecx - cached value of whichqs
          *   %edx - next process in queue           *   %edx - next lwp in queue
          *   %esi - old process           *   %esi - old lwp
          *   %edi - new process           *   %edi - new lwp
          */           */
   
         /* Look for new process. */          /* Look for new lwp. */
         cli                             # splhigh doesn't do a cli          cli                             # splhigh doesn't do a cli
         movl    _C_LABEL(sched_whichqs),%ecx          movl    _C_LABEL(sched_whichqs),%ecx
         bsfl    %ecx,%ebx               # find a full q          bsfl    %ecx,%ebx               # find a full q
Line 1717  ENTRY(cpu_switch)
Line 824  ENTRY(cpu_switch)
          *           *
          * Registers:           * Registers:
          *   %eax, %ecx - scratch           *   %eax, %ecx - scratch
          *   %esi - old process, then old pcb           *   %esi - old lwp, then old pcb
          *   %edi - idle pcb           *   %edi - idle pcb
          */           */
   
         pushl   %esi          pushl   %esi
         call    _C_LABEL(pmap_deactivate)       # pmap_deactivate(oldproc)          call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)
         addl    $4,%esp          addl    $4,%esp
   
         movl    P_ADDR(%esi),%esi          movl    L_ADDR(%esi),%esi
   
         /* Save stack pointers. */          /* Save stack pointers. */
         movl    %esp,PCB_ESP(%esi)          movl    %esp,PCB_ESP(%esi)
Line 1733  ENTRY(cpu_switch)
Line 840  ENTRY(cpu_switch)
   
         /* Find idle PCB for this CPU */          /* Find idle PCB for this CPU */
 #ifndef MULTIPROCESSOR  #ifndef MULTIPROCESSOR
         movl    $_C_LABEL(proc0),%ebx          movl    $_C_LABEL(lwp0),%ebx
         movl    P_ADDR(%ebx),%edi          movl    L_ADDR(%ebx),%edi
         movl    P_MD_TSS_SEL(%ebx),%edx          movl    L_MD_TSS_SEL(%ebx),%edx
 #else  #else
         movl    CPUVAR(IDLE_PCB),%edi          movl    CPUVAR(IDLE_PCB),%edi
         movl    CPUVAR(IDLE_TSS_SEL),%edx          movl    CPUVAR(IDLE_TSS_SEL),%edx
 #endif  #endif
         movl    $0,CPUVAR(CURPROC)              /* In case we fault... */          movl    $0,CPUVAR(CURLWP)               /* In case we fault... */
   
         /* Restore the idle context (avoid interrupts) */          /* Restore the idle context (avoid interrupts) */
         cli          cli
Line 1749  ENTRY(cpu_switch)
Line 856  ENTRY(cpu_switch)
         movl    PCB_ESP(%edi),%esp          movl    PCB_ESP(%edi),%esp
         movl    PCB_EBP(%edi),%ebp          movl    PCB_EBP(%edi),%ebp
   
   
         /* Switch address space. */  
         movl    PCB_CR3(%edi),%ecx  
         movl    %ecx,%cr3  
   
         /* Switch TSS. Reset "task busy" flag before loading. */          /* Switch TSS. Reset "task busy" flag before loading. */
           movl    %cr3,%eax
           movl    %eax,PCB_CR3(%edi)
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         movl    CPUVAR(GDT),%eax          movl    CPUVAR(GDT),%eax
 #else  #else
Line 1774  ENTRY(cpu_switch)
Line 878  ENTRY(cpu_switch)
   
         xorl    %esi,%esi          xorl    %esi,%esi
         sti          sti
 idle_unlock:  idle_unlock:
 #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG)  #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG) || defined(DIAGNOSTIC)
         call    _C_LABEL(sched_unlock_idle)          call    _C_LABEL(sched_unlock_idle)
 #endif  #endif
         /* Interrupts are okay again. */          /* Interrupts are okay again. */
Line 1783  idle_unlock: 
Line 887  idle_unlock: 
         call    _C_LABEL(Xspllower)     # process pending interrupts          call    _C_LABEL(Xspllower)     # process pending interrupts
         addl    $4,%esp          addl    $4,%esp
         jmp     idle_start          jmp     idle_start
 idle_zero:  idle_zero:
         sti          sti
         call    _C_LABEL(uvm_pageidlezero)          call    _C_LABEL(uvm_pageidlezero)
         cli          cli
Line 1797  idle_loop:
Line 901  idle_loop:
         sti          sti
         hlt          hlt
 NENTRY(mpidle)  NENTRY(mpidle)
 idle_start:  idle_start:
         cli          cli
         cmpl    $0,_C_LABEL(sched_whichqs)          cmpl    $0,_C_LABEL(sched_whichqs)
         jz      idle_loop          jz      idle_loop
 idle_exit:  idle_exit:
         movl    $IPL_HIGH,CPUVAR(ILEVEL)                # splhigh          movl    $IPL_HIGH,CPUVAR(ILEVEL)                # splhigh
 #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG)          sti
   #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG) || defined(DIAGNOSTIC)
         call    _C_LABEL(sched_lock_idle)          call    _C_LABEL(sched_lock_idle)
 #endif  #endif
         movl    _C_LABEL(sched_whichqs),%ecx          movl    _C_LABEL(sched_whichqs),%ecx
         bsfl    %ecx,%ebx          bsfl    %ecx,%ebx
         jz      idle_unlock          jz      idle_unlock
   
 switch_dequeue:  switch_dequeue:
         /*          /*
          * we're running at splhigh(), but it's otherwise okay to take           * we're running at splhigh(), but it's otherwise okay to take
          * interrupts here.           * interrupts here.
          */           */
         sti          sti
         leal    _C_LABEL(sched_qs)(,%ebx,8),%eax # select q          leal    _C_LABEL(sched_qs)(,%ebx,8),%eax # select q
   
         movl    P_FORW(%eax),%edi       # unlink from front of process q          movl    L_FORW(%eax),%edi       # unlink from front of process q
 #ifdef  DIAGNOSTIC  #ifdef  DIAGNOSTIC
         cmpl    %edi,%eax               # linked to self (i.e. nothing queued)?          cmpl    %edi,%eax               # linked to self (i.e. nothing queued)?
         je      _C_LABEL(switch_error)  # not possible          je      _C_LABEL(switch_error)  # not possible
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
         movl    P_FORW(%edi),%edx          movl    L_FORW(%edi),%edx
         movl    %edx,P_FORW(%eax)          movl    %edx,L_FORW(%eax)
         movl    %eax,P_BACK(%edx)          movl    %eax,L_BACK(%edx)
   
         cmpl    %edx,%eax               # q empty?          cmpl    %edx,%eax               # q empty?
         jne     3f          jne     3f
Line 1837  switch_dequeue:  
Line 942  switch_dequeue:  
         xorl    %eax,%eax          xorl    %eax,%eax
         CLEAR_RESCHED(%eax)          CLEAR_RESCHED(%eax)
   
   switch_resume:
 #ifdef  DIAGNOSTIC  #ifdef  DIAGNOSTIC
         cmpl    %eax,P_WCHAN(%edi)      # Waiting for something?          cmpl    %eax,L_WCHAN(%edi)      # Waiting for something?
         jne     _C_LABEL(switch_error)  # Yes; shouldn't be queued.          jne     _C_LABEL(switch_error)  # Yes; shouldn't be queued.
         cmpb    $SRUN,P_STAT(%edi)      # In run state?          cmpb    $LSRUN,L_STAT(%edi)     # In run state?
         jne     _C_LABEL(switch_error)  # No; shouldn't be queued.          jne     _C_LABEL(switch_error)  # No; shouldn't be queued.
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
   
         /* Isolate process.  XXX Is this necessary? */          /* Isolate lwp.  XXX Is this necessary? */
         movl    %eax,P_BACK(%edi)          movl    %eax,L_BACK(%edi)
   
         /* Record new process. */          /* Record new lwp. */
         movb    $SONPROC,P_STAT(%edi)   # p->p_stat = SONPROC          movb    $LSONPROC,L_STAT(%edi)  # l->l_stat = LSONPROC
         SET_CURPROC(%edi,%ecx)          SET_CURLWP(%edi,%ecx)
   
         /* Skip context switch if same process. */          /* Skip context switch if same lwp. */
           xorl    %ebx,%ebx
         cmpl    %edi,%esi          cmpl    %edi,%esi
         je      switch_return          je      switch_return
   
         /* If old process exited, don't bother. */          /* If old lwp exited, don't bother. */
         testl   %esi,%esi          testl   %esi,%esi
         jz      switch_exited          jz      switch_exited
   
Line 1864  switch_dequeue:  
Line 971  switch_dequeue:  
          *           *
          * Registers:           * Registers:
          *   %eax, %ecx - scratch           *   %eax, %ecx - scratch
          *   %esi - old process, then old pcb           *   %esi - old lwp, then old pcb
          *   %edi - new process           *   %edi - new lwp
          */           */
   
         pushl   %esi          pushl   %esi
         call    _C_LABEL(pmap_deactivate)       # pmap_deactivate(oldproc)          call    _C_LABEL(pmap_deactivate2)      # pmap_deactivate(oldproc)
         addl    $4,%esp          addl    $4,%esp
   
         movl    P_ADDR(%esi),%esi          movl    L_ADDR(%esi),%esi
   
         /* Save stack pointers. */          /* Save stack pointers. */
         movl    %esp,PCB_ESP(%esi)          movl    %esp,PCB_ESP(%esi)
Line 1885  switch_exited:
Line 992  switch_exited:
          * Registers:           * Registers:
          *   %eax, %ebx, %ecx, %edx - scratch           *   %eax, %ebx, %ecx, %edx - scratch
          *   %esi - new pcb           *   %esi - new pcb
          *   %edi - new process           *   %edi - new lwp
          */           */
   
         /* No interrupts while loading new state. */          /* No interrupts while loading new state. */
         cli          cli
         movl    P_ADDR(%edi),%esi          movl    L_ADDR(%edi),%esi
   
         /* Restore stack pointers. */          /* Restore stack pointers. */
         movl    PCB_ESP(%esi),%esp          movl    PCB_ESP(%esi),%esp
Line 1898  switch_exited:
Line 1005  switch_exited:
   
 #if 0  #if 0
         /* Don't bother with the rest if switching to a system process. */          /* Don't bother with the rest if switching to a system process. */
         testl   $P_SYSTEM,P_FLAG(%edi)          testl   $P_SYSTEM,L_FLAG(%edi); XXX NJWLWP lwp's don't have P_SYSTEM!
         jnz     switch_restored          jnz     switch_restored
 #endif  #endif
   
           /* Switch TSS. Reset "task busy" flag before loading. */
           movl    %cr3,%eax
           movl    %eax,PCB_CR3(%esi) /* XXX should be done by pmap_activate? */
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         movl    CPUVAR(GDT),%eax          movl    CPUVAR(GDT),%eax
 #else  #else
         /* Load TSS info. */          /* Load TSS info. */
         movl    _C_LABEL(gdt),%eax          movl    _C_LABEL(gdt),%eax
 #endif  #endif
         movl    P_MD_TSS_SEL(%edi),%edx          movl    L_MD_TSS_SEL(%edi),%edx
   
         /* Switch TSS. Reset "task busy" flag before loading. */  
         andl    $~0x0200,4(%eax,%edx, 1)          andl    $~0x0200,4(%eax,%edx, 1)
         ltr     %dx          ltr     %dx
   
Line 1924  switch_restored:
Line 1033  switch_restored:
         /* Restore cr0 (including FPU state). */          /* Restore cr0 (including FPU state). */
         movl    PCB_CR0(%esi),%ecx          movl    PCB_CR0(%esi),%ecx
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         /*          /*
          * If our floating point registers are on a different cpu,           * If our floating point registers are on a different CPU,
          * clear CR0_TS so we'll trap rather than reuse bogus state.           * clear CR0_TS so we'll trap rather than reuse bogus state.
          */           */
         movl    PCB_FPCPU(%esi),%ebx          movl    PCB_FPCPU(%esi),%ebx
         cmpl    CPUVAR(SELF),%ebx          cmpl    CPUVAR(SELF),%ebx
         jz      1f          jz      1f
         orl     $CR0_TS,%ecx          orl     $CR0_TS,%ecx
 1:  1:
 #endif  #endif
         movl    %ecx,%cr0          movl    %ecx,%cr0
   
         /* Record new pcb. */          /* Record new pcb. */
Line 1945  switch_restored:
Line 1054  switch_restored:
 /*  /*
  *  Check for restartable atomic sequences (RAS)   *  Check for restartable atomic sequences (RAS)
  */   */
         movl    CPUVAR(CURPROC),%edi          movl    CPUVAR(CURLWP),%edi
         cmpl    $0,P_NRAS(%edi)          movl    L_PROC(%edi),%esi
         je      1f          cmpl    $0,P_RASLIST(%esi)
         movl    P_MD_REGS(%edi),%ebx          jne     2f
         movl    TF_EIP(%ebx),%eax  
         pushl   %eax  
         pushl   %edi  
         call    _C_LABEL(ras_lookup)  
         addl    $8,%esp  
         cmpl    $-1,%eax  
         je      1f  
         movl    %eax,TF_EIP(%ebx)  
 1:  1:
           movl    $1,%ebx
   
 switch_return:  switch_return:
 #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG)  #if defined(MULTIPROCESSOR) || defined(LOCKDEBUG) || defined(DIAGNOSTIC)
         call    _C_LABEL(sched_unlock_idle)          call    _C_LABEL(sched_unlock_idle)
 #endif  #endif
           cmpl    $0,CPUVAR(IPENDING)
           jz      3f
         pushl   $IPL_NONE               # spl0()          pushl   $IPL_NONE               # spl0()
         call    _C_LABEL(Xspllower)     # process pending interrupts          call    _C_LABEL(Xspllower)     # process pending interrupts
         addl    $4,%esp          addl    $4,%esp
   3:
         movl    $IPL_HIGH,CPUVAR(ILEVEL)        # splhigh()          movl    $IPL_HIGH,CPUVAR(ILEVEL)        # splhigh()
   
         movl    %edi,%eax               # return (p);          movl    %ebx,%eax
   
         popl    %edi          popl    %edi
         popl    %esi          popl    %esi
         popl    %ebx          popl    %ebx
         ret          ret
   
   2:                                      # check RAS list
           movl    L_MD_REGS(%edi),%ebx
           movl    TF_EIP(%ebx),%eax
           pushl   %eax
           pushl   %esi
           call    _C_LABEL(ras_lookup)
           addl    $8,%esp
           cmpl    $-1,%eax
           je      1b
           movl    %eax,TF_EIP(%ebx)
           jmp     1b
   
   /*
    * void cpu_switchto(struct lwp *current, struct lwp *next)
    * Switch to the specified next LWP.
    */
   ENTRY(cpu_switchto)
           pushl   %ebx
           pushl   %esi
           pushl   %edi
   
   #ifdef DEBUG
           cmpl    $IPL_SCHED,CPUVAR(ILEVEL)
           jae     1f
           pushl   $2f
           call    _C_LABEL(panic)
           /* NOTREACHED */
   2:      .asciz  "not splsched() in cpu_switchto!"
   1:
   #endif /* DEBUG */
   
           movl    16(%esp),%esi           # current
           movl    20(%esp),%edi           # next
   
           /*
            * Clear curlwp so that we don't accumulate system time while idle.
            * This also insures that schedcpu() will move the old process to
            * the correct queue if it happens to get called from the spllower()
            * below and changes the priority.  (See corresponding comment in
            * usrret()).
            *
            * XXX Is this necessary?  We know we won't go idle.
            */
           movl    $0,CPUVAR(CURLWP)
   
           /*
            * We're running at splhigh(), but it's otherwise okay to take
            * interrupts here.
            */
           sti
   
           /* Jump into the middle of cpu_switch */
           xorl    %eax,%eax
           jmp     switch_resume
   
 /*  /*
  * void switch_exit(struct proc *p);   * void cpu_exit(struct lwp *l)
  * switch_exit(struct proc *p);   * Switch to the appropriate idle context (lwp0's if uniprocessor; the CPU's
  * Switch to the appropriate idle context (proc0's if uniprocessor; the cpu's   * if multiprocessor) and deallocate the address space and kernel stack for p.
  * if multiprocessor) and deallocate the address space and kernel stack for p.  
  * Then jump into cpu_switch(), as if we were in the idle proc all along.   * Then jump into cpu_switch(), as if we were in the idle proc all along.
  */   */
 #ifndef MULTIPROCESSOR  #ifndef MULTIPROCESSOR
         .globl  _C_LABEL(proc0)          .globl  _C_LABEL(lwp0)
 #endif  #endif
         .globl  _C_LABEL(uvmspace_free),_C_LABEL(kernel_map)  /* LINTSTUB: Func: void cpu_exit(struct lwp *l) */
         .globl  _C_LABEL(uvm_km_free),_C_LABEL(tss_free)  ENTRY(cpu_exit)
 /* LINTSTUB: Func: void switch_exit(struct proc *p) */  
 ENTRY(switch_exit)  
         movl    4(%esp),%edi            # old process          movl    4(%esp),%edi            # old process
 #ifndef MULTIPROCESSOR  #ifndef MULTIPROCESSOR
         movl    $_C_LABEL(proc0),%ebx          movl    $_C_LABEL(lwp0),%ebx
         movl    P_ADDR(%ebx),%esi          movl    L_ADDR(%ebx),%esi
         movl    P_MD_TSS_SEL(%ebx),%edx          movl    L_MD_TSS_SEL(%ebx),%edx
 #else  #else
         movl    CPUVAR(IDLE_PCB),%esi          movl    CPUVAR(IDLE_PCB),%esi
         movl    CPUVAR(IDLE_TSS_SEL),%edx          movl    CPUVAR(IDLE_TSS_SEL),%edx
 #endif  #endif
         /* In case we fault... */          /* In case we fault... */
         movl    $0,CPUVAR(CURPROC)          movl    $0,CPUVAR(CURLWP)
   
         /* Restore the idle context. */          /* Restore the idle context. */
         cli          cli
Line 2007  ENTRY(switch_exit)
Line 1165  ENTRY(switch_exit)
         movl    PCB_ESP(%esi),%esp          movl    PCB_ESP(%esi),%esp
         movl    PCB_EBP(%esi),%ebp          movl    PCB_EBP(%esi),%ebp
   
         /* Load TSS info. */          /* Switch TSS. Reset "task busy" flag before loading. */
           movl    %cr3,%eax
           movl    %eax,PCB_CR3(%esi)
 #ifdef MULTIPROCESSOR  #ifdef MULTIPROCESSOR
         movl    CPUVAR(GDT),%eax          movl    CPUVAR(GDT),%eax
 #else  #else
         /* Load TSS info. */          /* Load TSS info. */
         movl    _C_LABEL(gdt),%eax          movl    _C_LABEL(gdt),%eax
 #endif  #endif
   
         /* Switch address space. */  
         movl    PCB_CR3(%esi),%ecx  
         movl    %ecx,%cr3  
   
         /* Switch TSS. */  
         andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)          andl    $~0x0200,4-SEL_KPL(%eax,%edx,1)
         ltr     %dx          ltr     %dx
   
Line 2036  ENTRY(switch_exit)
Line 1191  ENTRY(switch_exit)
         sti          sti
   
         /*          /*
          * Schedule the dead process's vmspace and stack to be freed.           * Schedule the dead LWP's stack to be freed.
          */           */
         pushl   %edi                    /* exit2(p) */          pushl   %edi
         call    _C_LABEL(exit2)          call    _C_LABEL(lwp_exit2)
         addl    $4,%esp          addl    $4,%esp
   
         /* Jump into cpu_switch() with the right state. */          /* Jump into cpu_switch() with the right state. */
         xorl    %esi,%esi          xorl    %esi,%esi
         movl    %esi,CPUVAR(CURPROC)          movl    %esi,CPUVAR(CURLWP)
         jmp     idle_start          jmp     idle_start
   
 /*  /*
Line 2054  ENTRY(switch_exit)
Line 1209  ENTRY(switch_exit)
 /* LINTSTUB: Func: void savectx(struct pcb *pcb) */  /* LINTSTUB: Func: void savectx(struct pcb *pcb) */
 ENTRY(savectx)  ENTRY(savectx)
         movl    4(%esp),%edx            # edx = p->p_addr          movl    4(%esp),%edx            # edx = p->p_addr
   
         /* Save stack pointers. */          /* Save stack pointers. */
         movl    %esp,PCB_ESP(%edx)          movl    %esp,PCB_ESP(%edx)
         movl    %ebp,PCB_EBP(%edx)          movl    %ebp,PCB_EBP(%edx)
Line 2083  syscall1:
Line 1238  syscall1:
         INTRENTRY          INTRENTRY
   
 #ifdef DIAGNOSTIC  #ifdef DIAGNOSTIC
           cmpl    $0, CPUVAR(WANT_PMAPLOAD)
           jz      1f
           pushl   $6f
           call    _C_LABEL(printf)
           addl    $4, %esp
   1:
         movl    CPUVAR(ILEVEL),%ebx          movl    CPUVAR(ILEVEL),%ebx
         testl   %ebx,%ebx          testl   %ebx,%ebx
         jz      1f          jz      1f
Line 2092  syscall1:
Line 1253  syscall1:
 #ifdef DDB  #ifdef DDB
         int     $3          int     $3
 #endif  #endif
 1:  1:
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
         movl    CPUVAR(CURPROC),%edx          movl    CPUVAR(CURLWP),%edx
         movl    %esp,P_MD_REGS(%edx)    # save pointer to frame          movl    %esp,L_MD_REGS(%edx)    # save pointer to frame
           movl    L_PROC(%edx),%edx
           pushl   %esp
         call    *P_MD_SYSCALL(%edx)     # get pointer to syscall() function          call    *P_MD_SYSCALL(%edx)     # get pointer to syscall() function
 2:      /* Check for ASTs on exit to user mode. */          addl    $4,%esp
   .Lsyscall_checkast:
           /* Check for ASTs on exit to user mode. */
         cli          cli
         CHECK_ASTPENDING()          CHECK_ASTPENDING(%eax)
         je      1f          je      1f
         /* Always returning to user mode here. */          /* Always returning to user mode here. */
         CLEAR_ASTPENDING()          CLEAR_ASTPENDING(%eax)
         sti          sti
         /* Pushed T_ASTFLT into tf_trapno on entry. */          /* Pushed T_ASTFLT into tf_trapno on entry. */
           pushl   %esp
         call    _C_LABEL(trap)          call    _C_LABEL(trap)
         jmp     2b          addl    $4,%esp
           jmp     .Lsyscall_checkast      /* re-check ASTs */
   1:      CHECK_DEFERRED_SWITCH(%eax)
           jnz     9f
 #ifndef DIAGNOSTIC  #ifndef DIAGNOSTIC
 1:      INTRFASTEXIT          INTRFASTEXIT
 #else /* DIAGNOSTIC */  #else /* DIAGNOSTIC */
 1:      cmpl    $IPL_NONE,CPUVAR(ILEVEL)          cmpl    $IPL_NONE,CPUVAR(ILEVEL)
         jne     3f          jne     3f
         INTRFASTEXIT          INTRFASTEXIT
 3:      sti  3:      sti
Line 2123  syscall1:
Line 1292  syscall1:
         movl    $IPL_NONE,CPUVAR(ILEVEL)          movl    $IPL_NONE,CPUVAR(ILEVEL)
         jmp     2b          jmp     2b
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"
   6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"
 #endif /* DIAGNOSTIC */  #endif /* DIAGNOSTIC */
   9:      sti
           call    _C_LABEL(pmap_load)
           jmp     .Lsyscall_checkast      /* re-check ASTs */
   
 #if NNPX > 0  #if NNPX > 0
 /*  /*

Legend:
Removed from v.1.4  
changed lines
  Added in v.1.43.4.5

CVSweb <webmaster@jp.NetBSD.org>