[BACK]Return to locore.S CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys / arch / i386 / i386

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/sys/arch/i386/i386/locore.S between version 1.34.2.4 and 1.34.2.5

version 1.34.2.4, 2007/09/03 14:26:41 version 1.34.2.5, 2007/10/27 11:26:37
Line 1 
Line 1 
 /*      $NetBSD$        */  /*      $NetBSD$        */
   
   /*
    * Copyright-o-rama!
    */
   
   /*
    * Copyright (c) 2001 Wasabi Systems, Inc.
    * All rights reserved.
    *
    * Written by Frank van der Linden for Wasabi Systems, Inc.
    *
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions
    * are met:
    * 1. Redistributions of source code must retain the above copyright
    *    notice, this list of conditions and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright
    *    notice, this list of conditions and the following disclaimer in the
    *    documentation and/or other materials provided with the distribution.
    * 3. All advertising materials mentioning features or use of this software
    *    must display the following acknowledgement:
    *      This product includes software developed for the NetBSD Project by
    *      Wasabi Systems, Inc.
    * 4. The name of Wasabi Systems, Inc. may not be used to endorse
    *    or promote products derived from this software without specific prior
    *    written permission.
    *
    * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
    * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
    * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
    * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
    * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
    * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
    * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
    * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
    * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
    * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    * POSSIBILITY OF SUCH DAMAGE.
    */
   
   
 /*-  /*-
  * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.   * Copyright (c) 1998, 2000, 2004, 2006, 2007 The NetBSD Foundation, Inc.
  * All rights reserved.   * All rights reserved.
Line 139  _C_LABEL(cpu):  .long 0 # are we 80486, 
Line 179  _C_LABEL(cpu):  .long 0 # are we 80486, 
 _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual  _C_LABEL(atdevbase):    .long   0       # location of start of iomem in virtual
 _C_LABEL(proc0uarea):   .long   0  _C_LABEL(proc0uarea):   .long   0
 _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm  _C_LABEL(PDPpaddr):     .long   0       # paddr of PDP, for libkvm
   _C_LABEL(tablesize):    .long   0
   
         .space 512          .space 512
 tmpstk:  tmpstk:
Line 384  try586: /* Use the `cpuid' instruction. 
Line 425  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Virtual address space of kernel:   * Virtual address space of kernel:
  *   *
  * text | data | bss | [syms] | page dir | proc0 kstack   * text | data | bss | [syms] | page dir | proc0 kstack | L1 ptp
  *                            0          1       2      3   *                            0          1       2      3
  */   */
 #define PROC0PDIR       ((0)              * PAGE_SIZE)  
 #define PROC0STACK      ((1)              * PAGE_SIZE)  #define PROC0_PDIR_OFF  0
 #define SYSMAP          ((1+UPAGES)       * PAGE_SIZE)  #define PROC0_STK_OFF   (PROC0_PDIR_OFF + PAGE_SIZE)
 #define TABLESIZE       ((1+UPAGES) * PAGE_SIZE) /* + nkpde * PAGE_SIZE */  #define PROC0_PTP1_OFF  (PROC0_STK_OFF + UPAGES * PAGE_SIZE)
   
   /*
    * fillkpt
    *      eax = pte (page frame | control | status)
    *      ebx = page table address
    *      ecx = number of pages to map
    */
   
   #define fillkpt \
   1:      movl    %eax,(%ebx)     ;       /* store phys addr */ \
           addl    $4,%ebx         ;       /* next pte/pde */ \
           addl    $PAGE_SIZE,%eax ;       /* next phys page */ \
           loop    1b              ;  \
   
   
         /* Find end of kernel image. */          /* Find end of kernel image. */
         movl    $RELOC(end),%edi          movl    $RELOC(end),%edi
Line 404  try586: /* Use the `cpuid' instruction. 
Line 459  try586: /* Use the `cpuid' instruction. 
 1:  1:
 #endif  #endif
   
         /* Calculate where to start the bootstrap tables. */          /* Compute sizes */
         movl    %edi,%esi                       # edi = esym ? esym : end          movl    %edi,%esi                       # edi = esym ? esym : end
         addl    $PGOFSET,%esi                   # page align up          addl    $PGOFSET,%esi                   # page align up
         andl    $~PGOFSET,%esi          andl    $~PGOFSET,%esi
   
         /*          /* nkptp[1] = (esi + ~L2_FRAME) >> L2_SHIFT + 1; */
          * Calculate the size of the kernel page table directory, and          movl    %esi,%eax
          * how many entries it will have.  Adjust nkpde to the actual          addl    $~L2_FRAME,%eax
          * kernel size automatically.  Account for the bootstrap tables,          shrl    $L2_SHIFT,%eax
          * round up, and add an extra 4MB.          incl    %eax            /* one more ptp for VAs stolen by bootstrap */
          */  1:      movl    %eax,RELOC(nkptp)+1*4
         leal    TABLESIZE+NBPD+PDOFSET(%edi),%eax  
         shrl    $PDSHIFT,%eax          /* tablesize = (1 + UPAGES + nkptp) << PGSHIFT; */
         movl    RELOC(nkpde),%ecx               # get nkpde          addl    $(1+UPAGES),%eax
         cmpl    %ecx,%eax          shll    $PGSHIFT,%eax
         jb      1f          movl    %eax,RELOC(tablesize)
         movl    %eax,%ecx  
 1:      cmpl    $NKPTP_MIN,%ecx                 # larger than min?          /* ensure that nkptp covers bootstrap tables */
         jge     1f          addl    %esi,%eax
         movl    $NKPTP_MIN,%ecx                 # set at min          addl    $~L2_FRAME,%eax
         jmp     2f          shrl    $L2_SHIFT,%eax
 1:      cmpl    $NKPTP_MAX,%ecx                 # larger than max?          incl    %eax
         jle     2f          cmpl    %eax,RELOC(nkptp)+1*4
         movl    $NKPTP_MAX,%ecx          jnz     1b
 2:      movl    %ecx,RELOC(nkpde)  
           /* Clear tables */
         /* Clear memory for bootstrap tables. */          movl    %esi,%edi
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                       # end of tables  
         subl    %edi,%ecx                       # size of tables  
         shrl    $2,%ecx  
         xorl    %eax,%eax          xorl    %eax,%eax
         cld          cld
           movl    RELOC(tablesize),%ecx
           shrl    $2,%ecx
         rep          rep
         stosl          stosl
   
 /*          leal    (PROC0_PTP1_OFF)(%esi), %ebx
  * fillkpt  
  *      eax = pte (page frame | control | status)  
  *      ebx = page table address  
  *      ecx = number of pages to map  
  */  
 #define fillkpt         \  
 1:      movl    %eax,(%ebx)     ; \  
         addl    $PAGE_SIZE,%eax ; /* increment physical address */ \  
         addl    $4,%ebx         ; /* next pte */ \  
         loop    1b              ;  
   
 /*  /*
  * Build initial page tables.   * Build initial page tables.
  */   */
         /* Calculate end of text segment, rounded to a page. */          /*
         leal    (RELOC(etext)+PGOFSET),%edx           * Compute &__data_start - KERNBASE. This can't be > 4G,
            * or we can't deal with it anyway, since we can't load it in
            * 32 bit mode. So use the bottom 32 bits.
            */
           movl    $RELOC(__data_start),%edx
         andl    $~PGOFSET,%edx          andl    $~PGOFSET,%edx
   
         /* Skip over the first 1MB. */          /*
            * Skip the first MB.
            */
         movl    $_RELOC(KERNTEXTOFF),%eax          movl    $_RELOC(KERNTEXTOFF),%eax
         movl    %eax,%ecx          movl    %eax,%ecx
         shrl    $PGSHIFT,%ecx          shrl    $(PGSHIFT-2),%ecx       /* ((n >> PGSHIFT) << 2) for # pdes */
         leal    (SYSMAP)(%esi,%ecx,4),%ebx          addl    %ecx,%ebx
   
         /* Map the kernel text read-only. */          /* Map the kernel text read-only. */
         movl    %edx,%ecx          movl    %edx,%ecx
Line 475  try586: /* Use the `cpuid' instruction. 
Line 523  try586: /* Use the `cpuid' instruction. 
   
         /* Map the data, BSS, and bootstrap tables read-write. */          /* Map the data, BSS, and bootstrap tables read-write. */
         leal    (PG_V|PG_KW)(%edx),%eax          leal    (PG_V|PG_KW)(%edx),%eax
         movl    RELOC(nkpde),%ecx          movl    RELOC(tablesize),%ecx
         shll    $PGSHIFT,%ecx  
         addl    $TABLESIZE,%ecx  
         addl    %esi,%ecx                               # end of tables          addl    %esi,%ecx                               # end of tables
         subl    %edx,%ecx                               # subtract end of text          subl    %edx,%ecx                               # subtract end of text
         shrl    $PGSHIFT,%ecx          shrl    $PGSHIFT,%ecx
         fillkpt          fillkpt
   
         /* Map ISA I/O memory. */          /* Map ISA I/O mem (later atdevbase) */
         movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set          movl    $(IOM_BEGIN|PG_V|PG_KW/*|PG_N*/),%eax   # having these bits set
         movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,          movl    $(IOM_SIZE>>PGSHIFT),%ecx               # for this many pte s,
         fillkpt          fillkpt
Line 491  try586: /* Use the `cpuid' instruction. 
Line 537  try586: /* Use the `cpuid' instruction. 
 /*  /*
  * Construct a page table directory.   * Construct a page table directory.
  */   */
         /* Install PDEs for temporary double map of kernel. */          /* Set up top level entries for identity mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF)(%esi),%ebx
         leal    (PROC0PDIR+0*4)(%esi),%ebx              # which is where temp maps!          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Map kernel PDEs. */          /* Set up top level entries for actual kernel mapping */
         movl    RELOC(nkpde),%ecx                       # for this many pde s,          leal    (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*4)(%esi),%ebx
         leal    (PROC0PDIR+PDSLOT_KERN*4)(%esi),%ebx    # kernel pde offset          leal    (PROC0_PTP1_OFF)(%esi),%eax
         leal    (SYSMAP+PG_V|PG_KW)(%esi),%eax          # pte for KPT in proc 0,          orl     $(PG_V|PG_KW), %eax
           movl    RELOC(nkptp)+1*4,%ecx
         fillkpt          fillkpt
   
         /* Install a PDE recursively mapping page directory as a page table! */          /* Install a PDE recursively mapping page directory as a page table! */
         leal    (PROC0PDIR+PG_V|PG_KW)(%esi),%eax       # pte for ptd          leal    (PROC0_PDIR_OFF + PDIR_SLOT_PTE*4)(%esi),%ebx
         movl    %eax,(PROC0PDIR+PDSLOT_PTE*4)(%esi)     # recursive PD slot          leal    (PROC0_PDIR_OFF)(%esi),%eax
           orl     $(PG_V|PG_KW),%eax
           movl    %eax,(%ebx)
   
   
         /* Save phys. addr of PDP, for libkvm. */          /* Save phys. addr of PDP, for libkvm. */
         movl    %esi,RELOC(PDPpaddr)          movl    %esi,RELOC(PDPpaddr)
   
         /* Load base of page directory and enable mapping. */          /*
            * Startup checklist:
            * 1. Load %cr3 with pointer to PDIR.
            */
         movl    %esi,%eax               # phys address of ptd in proc 0          movl    %esi,%eax               # phys address of ptd in proc 0
         movl    %eax,%cr3               # load ptd addr into mmu          movl    %eax,%cr3               # load ptd addr into mmu
   
           /*
            * 2. Enable paging and the rest of it.
            */
         movl    %cr0,%eax               # get control word          movl    %cr0,%eax               # get control word
                                         # enable paging & NPX emulation                                          # enable paging & NPX emulation
         orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax          orl     $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax
Line 522  try586: /* Use the `cpuid' instruction. 
Line 580  try586: /* Use the `cpuid' instruction. 
         ret          ret
   
 begin:  begin:
         /* Now running relocated at KERNBASE.  Remove double mapping. */          /*
         movl    _C_LABEL(nkpde),%ecx            # for this many pde s,           * We have arrived.
         leal    (PROC0PDIR+0*4)(%esi),%ebx      # which is where temp maps!           * There's no need anymore for the identity mapping in low
         addl    $(KERNBASE), %ebx       # now use relocated address           * memory, remove it.
            */
           movl    _C_LABEL(nkptp)+1*4,%ecx
           leal    (PROC0_PDIR_OFF)(%esi),%ebx     # old, phys  address of PDIR
           addl    $(KERNBASE), %ebx       # new, virtual address of PDIR
 1:      movl    $0,(%ebx)  1:      movl    $0,(%ebx)
         addl    $4,%ebx # next pde          addl    $4,%ebx
         loop    1b          loop    1b
   
         /* Relocate atdevbase. */          /* Relocate atdevbase. */
         movl    _C_LABEL(nkpde),%edx          movl    $KERNBASE,%edx
         shll    $PGSHIFT,%edx          addl    _C_LABEL(tablesize),%edx
         addl    $(TABLESIZE+KERNBASE),%edx  
         addl    %esi,%edx          addl    %esi,%edx
         movl    %edx,_C_LABEL(atdevbase)          movl    %edx,_C_LABEL(atdevbase)
   
         /* Set up bootstrap stack. */          /* Set up bootstrap stack. */
         leal    (PROC0STACK+KERNBASE)(%esi),%eax          leal    (PROC0_STK_OFF+KERNBASE)(%esi),%eax
         movl    %eax,_C_LABEL(proc0uarea)          movl    %eax,_C_LABEL(proc0uarea)
         leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp          leal    (KSTACK_SIZE-FRAMESIZE)(%eax),%esp
         movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3          movl    %esi,(KSTACK_SIZE+PCB_CR3)(%eax)        # pcb->pcb_cr3
Line 557  begin:
Line 618  begin:
         call    _C_LABEL(initgdt)          call    _C_LABEL(initgdt)
         addl    $4,%esp          addl    $4,%esp
   
         movl    _C_LABEL(nkpde),%eax          movl    _C_LABEL(tablesize),%eax
         shll    $PGSHIFT,%eax  
         addl    $TABLESIZE,%eax  
         addl    %esi,%eax               # skip past stack and page tables          addl    %esi,%eax               # skip past stack and page tables
   
         pushl   %eax          pushl   %eax
Line 604  NENTRY(lwp_trampoline)
Line 663  NENTRY(lwp_trampoline)
         pushl   %ebx          pushl   %ebx
         call    *%esi          call    *%esi
         addl    $4,%esp          addl    $4,%esp
         DO_DEFERRED_SWITCH(%eax)          DO_DEFERRED_SWITCH
         INTRFASTEXIT          INTRFASTEXIT
         /* NOTREACHED */          /* NOTREACHED */
   
Line 630  NENTRY(sigcode)
Line 689  NENTRY(sigcode)
 _C_LABEL(esigcode):  _C_LABEL(esigcode):
   
 /*  /*
  * void lgdt(struct region_descriptor *rdp);  
  *  
  * Load a new GDT pointer (and do any necessary cleanup).  
  * XXX It's somewhat questionable whether reloading all the segment registers  
  * is necessary, since the actual descriptor data is not changed except by  
  * process creation and exit, both of which clean up via task switches.  OTOH,  
  * this only happens at run time when the GDT is resized.  
  */  
 NENTRY(lgdt)  
         /* Reload the descriptor table. */  
         movl    4(%esp),%eax  
         lgdt    (%eax)  
         /* Flush the prefetch queue. */  
         jmp     1f  
         nop  
 1:      /* Reload "stale" selectors. */  
         movl    $GSEL(GDATA_SEL, SEL_KPL),%eax  
         movw    %ax,%ds  
         movw    %ax,%es  
         movw    %ax,%gs  
         movw    %ax,%ss  
         movl    $GSEL(GCPU_SEL, SEL_KPL),%eax  
         movw    %ax,%fs  
         /* Reload code selector by doing intersegment return. */  
         popl    %eax  
         pushl   $GSEL(GCODE_SEL, SEL_KPL)  
         pushl   %eax  
         lret  
   
 /*  
  * void x86_flush()  
  *  
  * Flush instruction pipelines by doing an intersegment (far) return.  
  */  
 NENTRY(x86_flush)  
         popl    %eax  
         pushl   $GSEL(GCODE_SEL, SEL_KPL)  
         pushl   %eax  
         lret  
   
 /*  
  * int setjmp(label_t *)   * int setjmp(label_t *)
  *   *
  * Used primarily by DDB.   * Used primarily by DDB.
Line 866  syscall1:
Line 884  syscall1:
         call    _C_LABEL(trap)          call    _C_LABEL(trap)
         addl    $4,%esp          addl    $4,%esp
         jmp     .Lsyscall_checkast      /* re-check ASTs */          jmp     .Lsyscall_checkast      /* re-check ASTs */
 1:      CHECK_DEFERRED_SWITCH(%eax)  1:      CHECK_DEFERRED_SWITCH
         jnz     9f          jnz     9f
 #ifndef DIAGNOSTIC  #ifndef DIAGNOSTIC
         INTRFASTEXIT          INTRFASTEXIT
Line 882  syscall1:
Line 900  syscall1:
         int     $3          int     $3
 #endif /* DDB */  #endif /* DDB */
         movl    $IPL_NONE,CPUVAR(ILEVEL)          movl    $IPL_NONE,CPUVAR(ILEVEL)
         jmp     2b          jmp     .Lsyscall_checkast
 4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"  4:      .asciz  "WARNING: SPL NOT LOWERED ON SYSCALL EXIT\n"
 5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"  5:      .asciz  "WARNING: SPL NOT ZERO ON SYSCALL ENTRY\n"
 6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"  6:      .asciz  "WARNING: WANT PMAPLOAD ON SYSCALL ENTRY\n"

Legend:
Removed from v.1.34.2.4  
changed lines
  Added in v.1.34.2.5

CVSweb <webmaster@jp.NetBSD.org>