Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files. =================================================================== RCS file: /ftp/cvs/cvsroot/src/sys/arch/i386/i386/locore.S,v rcsdiff: /ftp/cvs/cvsroot/src/sys/arch/i386/i386/locore.S,v: warning: Unknown phrases like `commitid ...;' are present. retrieving revision 1.95.8.1 retrieving revision 1.109 diff -u -p -r1.95.8.1 -r1.109 --- src/sys/arch/i386/i386/locore.S 2012/03/04 00:46:09 1.95.8.1 +++ src/sys/arch/i386/i386/locore.S 2014/01/11 17:05:17 1.109 @@ -1,4 +1,4 @@ -/* $NetBSD: locore.S,v 1.95.8.1 2012/03/04 00:46:09 mrg Exp $ */ +/* $NetBSD: locore.S,v 1.109 2014/01/11 17:05:17 christos Exp $ */ /* * Copyright-o-rama! @@ -129,7 +129,7 @@ */ #include -__KERNEL_RCSID(0, "$NetBSD: locore.S,v 1.95.8.1 2012/03/04 00:46:09 mrg Exp $"); +__KERNEL_RCSID(0, "$NetBSD: locore.S,v 1.109 2014/01/11 17:05:17 christos Exp $"); #include "opt_compat_oldboot.h" #include "opt_ddb.h" @@ -163,45 +163,46 @@ __KERNEL_RCSID(0, "$NetBSD: locore.S,v 1 /* Get definitions for IOM_BEGIN, IOM_END, and IOM_SIZE */ #include +#ifndef XEN +#define _RELOC(x) ((x) - KERNBASE) +#else +#define _RELOC(x) ((x)) +#endif /* XEN */ +#define RELOC(x) _RELOC(_C_LABEL(x)) + #ifdef XEN /* * Xen guest identifier and loader selection */ .section __xen_guest .ascii "GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0" -#if defined(DOM0OPS) || !defined(XEN_COMPAT_030001) - .ascii ",VIRT_BASE=0xc0000000" /* KERNBASE */ - .ascii ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */ -#else - .ascii ",VIRT_BASE=0xc0100000" /* KERNTEXTOFF */ - .ascii ",ELF_PADDR_OFFSET=0xc0100000" /* KERNTEXTOFF */ -#endif - .ascii ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */ -#if !defined(XEN_COMPAT_030001) - .ascii ",HYPERCALL_PAGE=0x00000101" + .ascii ",VIRT_BASE=0xc0000000" /* KERNBASE */ + .ascii ",ELF_PADDR_OFFSET=0xc0000000" /* KERNBASE */ + .ascii ",VIRT_ENTRY=0xc0100000" /* KERNTEXTOFF */ + .ascii ",HYPERCALL_PAGE=0x00000101" /* (???+HYPERCALL_PAGE_OFFSET)/PAGE_SIZE) */ -#endif #ifdef PAE - .ascii ",PAE=yes[extended-cr3]" + .ascii ",PAE=yes[extended-cr3]" #endif .ascii ",LOADER=generic" #if (NKSYMS || defined(DDB) || defined(MODULAR)) && !defined(SYMTAB_SPACE) .ascii ",BSD_SYMTAB=yes" #endif .byte 0 -#endif +#endif /* XEN */ /* * Initialization */ .data - .globl _C_LABEL(cpu) + .globl _C_LABEL(cputype) .globl _C_LABEL(cpuid_level) .globl _C_LABEL(esym) .globl _C_LABEL(eblob) .globl _C_LABEL(atdevbase) - .globl _C_LABEL(lwp0uarea),_C_LABEL(PDPpaddr) + .globl _C_LABEL(lwp0uarea) + .globl _C_LABEL(PDPpaddr) .globl _C_LABEL(gdt) .globl _C_LABEL(idt) .globl _C_LABEL(lapic_tpr) @@ -213,52 +214,68 @@ __KERNEL_RCSID(0, "$NetBSD: locore.S,v 1 .align 12 #endif .globl _C_LABEL(local_apic), _C_LABEL(lapic_id) -_C_LABEL(local_apic): + .type _C_LABEL(local_apic), @object +LABEL(local_apic) .space LAPIC_ID -_C_LABEL(lapic_id): +END(local_apic) + .type _C_LABEL(lapic_id), @object +LABEL(lapic_id) .long 0x00000000 - .space LAPIC_TPRI-(LAPIC_ID+4) -_C_LABEL(lapic_tpr): - .space LAPIC_PPRI-LAPIC_TPRI + .space LAPIC_TPRI-(LAPIC_ID+4) +END(lapic_id) + .type _C_LABEL(lapic_tpr), @object +LABEL(lapic_tpr) + .space LAPIC_PPRI-LAPIC_TPRI +END(lapic_tpr) + .type _C_LABEL(lapic_ppr), @object _C_LABEL(lapic_ppr): .space LAPIC_ISR-LAPIC_PPRI +END(lapic_ppr) + .type _C_LABEL(lapic_isr), @object _C_LABEL(lapic_isr): .space PAGE_SIZE-LAPIC_ISR +END(lapic_isr) #else -_C_LABEL(lapic_tpr): + .type _C_LABEL(lapic_tpr), @object +LABEL(lapic_tpr) .long 0 +END(lapic_tpr) #endif - -_C_LABEL(cpu): .long 0 # are we 80486, Pentium, or.. -_C_LABEL(cpuid_level): .long 0 -_C_LABEL(atdevbase): .long 0 # location of start of iomem in virtual -_C_LABEL(lwp0uarea): .long 0 -_C_LABEL(PDPpaddr): .long 0 # paddr of PDP, for libkvm + .type _C_LABEL(cputype), @object +LABEL(cputype) .long 0 # are we 80486, Pentium, or.. +END(cputype) + .type _C_LABEL(cpuid_level), @object +LABEL(cpuid_level) .long 0 +END(cpuid_level) + .type _C_LABEL(atdevbase), @object +LABEL(atdevbase) .long 0 # location of start of iomem in virtual +END(atdevbase) + .type _C_LABEL(lwp0uarea), @object +LABEL(lwp0uarea) .long 0 +END(lwp0uarea) + .type _C_LABEL(PDPpaddr), @object +LABEL(PDPpaddr) .long 0 # paddr of PDP, for libkvm +END(PDPpaddr) + .type _C_LABEL(tablesize), @object _C_LABEL(tablesize): .long 0 - +END(tablesize) + .size tmpstk, tmpstk - . .space 512 tmpstk: #ifdef XEN .align PAGE_SIZE, 0x0 # Align on page boundary -_C_LABEL(tmpgdt): +LABEL(tmpgdt) .space PAGE_SIZE # Xen expects a page +END(tmpgdt) #endif /* XEN */ - .globl tmpgdt -#ifndef XEN -#define _RELOC(x) ((x) - KERNBASE) -#else -#define _RELOC(x) ((x)) -#endif /* XEN */ -#define RELOC(x) _RELOC(_C_LABEL(x)) .text .globl _C_LABEL(kernel_text) .set _C_LABEL(kernel_text),KERNTEXTOFF - .globl start +ENTRY(start) #ifndef XEN -start: movw $0x1234,0x472 # warm boot - + movw $0x1234,0x472 # warm boot #if defined(MULTIBOOT) jmp 1f @@ -346,11 +363,11 @@ isnx586: * Don't try cpuid, as Nx586s reportedly don't support the * PSL_ID bit. */ - movl $CPU_NX586,RELOC(cpu) + movl $CPU_NX586,RELOC(cputype) jmp 2f is386: - movl $CPU_386,RELOC(cpu) + movl $CPU_386,RELOC(cputype) jmp 2f try486: /* Try to toggle identification flag; does not exist on early 486s. */ @@ -369,7 +386,7 @@ try486: /* Try to toggle identification testl %eax,%eax jnz try586 -is486: movl $CPU_486,RELOC(cpu) +is486: movl $CPU_486,RELOC(cputype) /* * Check Cyrix CPU * Cyrix CPUs do not change the undefined flags following @@ -387,7 +404,7 @@ is486: movl $CPU_486,RELOC(cpu) popfl jmp 2f trycyrix486: - movl $CPU_6x86,RELOC(cpu) # set CPU type + movl $CPU_6x86,RELOC(cputype) # set CPU type /* * Check for Cyrix 486 CPU by seeing if the flags change during a * divide. This is documented in the Cx486SLC/e SMM Programmer's @@ -405,7 +422,7 @@ trycyrix486: xorl %ecx,%eax # are the flags different? testl $0x8d5,%eax # only check C|PF|AF|Z|N|V jne 2f # yes; must be Cyrix 6x86 CPU - movl $CPU_486DLC,RELOC(cpu) # set CPU type + movl $CPU_486DLC,RELOC(cputype) # set CPU type #ifndef CYRIX_CACHE_WORKS /* Disable caching of the ISA hole only. */ @@ -512,7 +529,7 @@ try586: /* Use the `cpuid' instruction. * eax = pte (page frame | control | status) * ebx = page table address * ecx = number of pages to map - * + * * For PAE, each entry is 8 bytes long: we must set the 4 upper bytes to 0. * This is done by the first instruction of fillkpt. In the non-PAE case, this * instruction just clears the page table entry. @@ -520,9 +537,9 @@ try586: /* Use the `cpuid' instruction. #define fillkpt \ 1: movl $0,(PDE_SIZE-4)(%ebx) ; /* clear bits */ \ - movl %eax,(%ebx) ; /* store phys addr */ \ - addl $PDE_SIZE,%ebx ; /* next pte/pde */ \ - addl $PAGE_SIZE,%eax ; /* next phys page */ \ + movl %eax,(%ebx) ; /* store phys addr */ \ + addl $PDE_SIZE,%ebx ; /* next pte/pde */ \ + addl $PAGE_SIZE,%eax ; /* next phys page */ \ loop 1b ; /* Find end of kernel image. */ @@ -575,38 +592,38 @@ try586: /* Use the `cpuid' instruction. cmpl %eax,RELOC(nkptp)+1*4 jnz 1b - /* Clear tables */ - movl %esi,%edi + /* Clear tables */ + movl %esi,%edi xorl %eax,%eax cld - movl RELOC(tablesize),%ecx - shrl $2,%ecx + movl RELOC(tablesize),%ecx + shrl $2,%ecx rep stosl - leal (PROC0_PTP1_OFF)(%esi), %ebx + leal (PROC0_PTP1_OFF)(%esi), %ebx /* * Build initial page tables. */ - /* - * Compute &__data_start - KERNBASE. This can't be > 4G, + /* + * Compute &__data_start - KERNBASE. This can't be > 4G, * or we can't deal with it anyway, since we can't load it in * 32 bit mode. So use the bottom 32 bits. - */ - movl $RELOC(__data_start),%edx + */ + movl $RELOC(__data_start),%edx andl $~PGOFSET,%edx - /* - * Skip the first MB. - */ + /* + * Skip the first MB. + */ movl $_RELOC(KERNTEXTOFF),%eax movl %eax,%ecx shrl $(PGSHIFT-2),%ecx /* ((n >> PGSHIFT) << 2) for # pdes */ #ifdef PAE - shll $1,%ecx /* pdes are twice larger with PAE */ + shll $1,%ecx /* pdes are twice larger with PAE */ #endif - addl %ecx,%ebx + addl %ecx,%ebx /* Map the kernel text read-only. */ movl %edx,%ecx @@ -631,24 +648,24 @@ try586: /* Use the `cpuid' instruction. /* * Construct a page table directory. */ - /* Set up top level entries for identity mapping */ - leal (PROC0_PDIR_OFF)(%esi),%ebx - leal (PROC0_PTP1_OFF)(%esi),%eax - orl $(PG_V|PG_KW), %eax - movl RELOC(nkptp)+1*4,%ecx + /* Set up top level entries for identity mapping */ + leal (PROC0_PDIR_OFF)(%esi),%ebx + leal (PROC0_PTP1_OFF)(%esi),%eax + orl $(PG_V|PG_KW), %eax + movl RELOC(nkptp)+1*4,%ecx fillkpt - /* Set up top level entries for actual kernel mapping */ - leal (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*PDE_SIZE)(%esi),%ebx - leal (PROC0_PTP1_OFF)(%esi),%eax - orl $(PG_V|PG_KW), %eax - movl RELOC(nkptp)+1*4,%ecx + /* Set up top level entries for actual kernel mapping */ + leal (PROC0_PDIR_OFF + L2_SLOT_KERNBASE*PDE_SIZE)(%esi),%ebx + leal (PROC0_PTP1_OFF)(%esi),%eax + orl $(PG_V|PG_KW), %eax + movl RELOC(nkptp)+1*4,%ecx fillkpt /* Install a PDE recursively mapping page directory as a page table! */ - leal (PROC0_PDIR_OFF + PDIR_SLOT_PTE*PDE_SIZE)(%esi),%ebx - leal (PROC0_PDIR_OFF)(%esi),%eax - orl $(PG_V|PG_KW),%eax + leal (PROC0_PDIR_OFF + PDIR_SLOT_PTE*PDE_SIZE)(%esi),%ebx + leal (PROC0_PDIR_OFF)(%esi),%eax + orl $(PG_V|PG_KW),%eax movl $PDP_SIZE,%ecx fillkpt @@ -677,29 +694,29 @@ try586: /* Use the `cpuid' instruction. movl %esi,%eax # phys address of ptd in proc 0 movl %eax,%cr3 # load ptd addr into mmu - /* - * 2. Enable paging and the rest of it. - */ + /* + * 2. Enable paging and the rest of it. + */ movl %cr0,%eax # get control word # enable paging & NPX emulation - orl $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP),%eax + orl $(CR0_PE|CR0_PG|CR0_NE|CR0_TS|CR0_EM|CR0_MP|CR0_WP|CR0_AM),%eax movl %eax,%cr0 # and page NOW! pushl $begin # jump to high mem ret begin: - /* - * We have arrived. - * There's no need anymore for the identity mapping in low - * memory, remove it. - */ - movl _C_LABEL(nkptp)+1*4,%ecx - leal (PROC0_PDIR_OFF)(%esi),%ebx # old, phys address of PDIR - addl $(KERNBASE), %ebx # new, virtual address of PDIR + /* + * We have arrived. + * There's no need anymore for the identity mapping in low + * memory, remove it. + */ + movl _C_LABEL(nkptp)+1*4,%ecx + leal (PROC0_PDIR_OFF)(%esi),%ebx # old, phys address of PDIR + addl $(KERNBASE), %ebx # new, virtual address of PDIR 1: movl $0,(PDE_SIZE-4)(%ebx) # Upper bits (for PAE) movl $0,(%ebx) - addl $PDE_SIZE,%ebx + addl $PDE_SIZE,%ebx loop 1b /* Relocate atdevbase. */ @@ -709,11 +726,11 @@ begin: movl %edx,_C_LABEL(atdevbase) /* Set up bootstrap stack. */ - leal (PROC0_STK_OFF+KERNBASE)(%esi),%eax + leal (PROC0_STK_OFF+KERNBASE)(%esi),%eax movl %eax,_C_LABEL(lwp0uarea) leal (KSTACK_SIZE-FRAMESIZE)(%eax),%esp movl %esi,(KSTACK_SIZE+PCB_CR3)(%eax) # pcb->pcb_cr3 - xorl %ebp,%ebp # mark end of frames + xorl %ebp,%ebp # mark end of frames #if defined(MULTIBOOT) /* It is now safe to parse the Multiboot information structure @@ -728,7 +745,7 @@ begin: call _C_LABEL(initgdt) addl $4,%esp - movl _C_LABEL(tablesize),%eax + movl _C_LABEL(tablesize),%eax addl %esi,%eax # skip past stack and page tables #ifdef PAE @@ -759,7 +776,6 @@ begin: call _C_LABEL(main) #else /* XEN */ -start: /* First, reset the PSL. */ pushl $PSL_MBO popfl @@ -768,7 +784,7 @@ start: movl %esp, %ebx # save start of available space movl $_RELOC(tmpstk),%esp # bootstrap stack end location - /* Clear BSS first so that there are no surprises... */ + /* Clear BSS. */ xorl %eax,%eax movl $RELOC(__bss_start),%edi movl $RELOC(_end),%ecx @@ -776,7 +792,7 @@ start: rep stosb /* Copy the necessary stuff from start_info structure. */ - /* We need to copy shared_info early, so that sti/cli work */ + /* We need to copy shared_info early, so that sti/cli work */ movl $RELOC(start_info_union),%edi movl $128,%ecx rep movsl @@ -811,7 +827,7 @@ start: /* Set up bootstrap stack. */ leal (KSTACK_SIZE-FRAMESIZE)(%eax),%esp - xorl %ebp,%ebp # mark end of frames + xorl %ebp,%ebp # mark end of frames addl $USPACE, %esi subl $KERNBASE, %esi #init386 want a physical address @@ -823,14 +839,16 @@ start: call _C_LABEL(init386) # wire 386 chip for unix operation addl $PDE_SIZE,%esp # pop paddr_t call _C_LABEL(main) +#endif /* XEN */ +END(start) -#if defined(XEN) && !defined(XEN_COMPAT_030001) +#if defined(XEN) /* space for the hypercall call page */ #define HYPERCALL_PAGE_OFFSET 0x1000 .org HYPERCALL_PAGE_OFFSET ENTRY(hypercall_page) .skip 0x1000 -#endif /* defined(XEN) && !defined(XEN_COMPAT_030001) */ +END(hypercall_page) /* * void lgdt_finish(void); @@ -863,8 +881,9 @@ END(lgdt_finish) * * This is a trampoline function pushed onto the stack of a newly created * process in order to do some additional setup. The trampoline is entered by - * cpu_switch()ing to the process, so we abuse the callee-saved registers used - * by cpu_switch() to store the information about the stub to call. + * cpu_switchto()ing to the process, so we abuse the callee-saved + * registers used by cpu_switchto() to store the information about the + * stub to call. * NOTE: This function does not have a normal calling sequence! */ NENTRY(lwp_trampoline) @@ -956,7 +975,7 @@ ENTRY(dumpsys) END(dumpsys) /* - * struct lwp *cpu_switchto(struct lwp *oldlwp, struct *newlwp, + * struct lwp *cpu_switchto(struct lwp *oldlwp, struct lwp *newlwp, * bool returning) * * 1. if (oldlwp != NULL), save its context. @@ -1137,7 +1156,7 @@ IDTVEC(osyscall) #endif pushfl # set eflags in trap frame popl 8(%esp) - orl $PSL_I,(%esp) # re-enable ints on return to user + orl $PSL_I,8(%esp) # re-enable ints on return to user pushl $7 # size of instruction for restart jmp syscall1 IDTVEC_END(osyscall) @@ -1192,13 +1211,13 @@ syscall1: .Lsyscall_resume: movl %ebx,%eax # get cpl movl CPUVAR(IUNMASK)(,%eax,4),%eax - andl CPUVAR(IPENDING),%eax # any non-masked bits left? + andl CPUVAR(IPENDING),%eax # any non-masked bits left? jz 17f bsrl %eax,%eax btrl %eax,CPUVAR(IPENDING) movl CPUVAR(ISOURCES)(,%eax,4),%eax jmp *IS_RESUME(%eax) -17: movl %ebx, CPUVAR(ILEVEL) #restore cpl +17: movl %ebx, CPUVAR(ILEVEL) #restore cpl jmp .Lsyscall_checkast 14: #endif /* XEN */