CVS log for src/sys/arch/hp300/stand/mkboot/Makefile

Up to [cvs.NetBSD.org] / src / sys / arch / hp300 / stand / mkboot

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by tsutsui in ticket #722):

	sys/fs/cd9660/cd9660_util.c: revision 1.16
	sys/arch/hp300/stand/common/clock.c: revision 1.14
	sys/arch/hp300/stand/common/scsireg.h: revision 1.5
	sys/arch/hp300/stand/common/scsireg.h: revision 1.6
	sys/arch/hp300/stand/Makefile.buildboot: revision 1.38
	sys/arch/hp300/include/bus.h: revision 1.23
	sys/arch/hp300/stand/Makefile.buildboot: revision 1.39
	sys/arch/hp300/stand/common/sd.c: revision 1.12
	sys/arch/hp300/stand/common/prf.c: revision 1.6
	sys/arch/hp300/stand/common/sd.c: revision 1.13
	usr.sbin/installboot/installboot.8: revision 1.106
	usr.sbin/installboot/Makefile: revision 1.59
	sys/arch/hp300/stand/common/devopen.c: revision 1.14
	usr.sbin/installboot/installboot.8: revision 1.107
	sys/arch/hp300/stand/common/ite_dumb.c: revision 1.2
	sys/arch/hp300/stand/common/devopen.c: revision 1.15
	usr.sbin/installboot/installboot.8: revision 1.108
	sys/fs/cd9660/cd9660_extern.h: revision 1.29
	usr.sbin/installboot/installboot.8: revision 1.109
	tools/Makefile.nbincludes: revision 1.11 (patch)
	sys/arch/hp300/dev/rboxreg.h: revision 1.3
	sys/arch/hp300/stand/common/scsivar.h: revision 1.5
	sys/arch/hp300/dev/dnkbd.c: revision 1.14
	sys/arch/hp300/hp300/trap.c: revision 1.156
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.12
	sys/arch/hp300/dev/frodoreg.h: revision 1.6
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.13
	sys/arch/hp300/stand/common/ite_sti.c: revision 1.2
	sys/arch/hp300/stand/common/hil.c: revision 1.15
	usr.sbin/installboot/arch/hp300.c: revision 1.18
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.14
	sys/arch/hp300/dev/rbox.c: revision 1.4
	usr.sbin/installboot/arch/hp300.c: revision 1.19
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.15
	sys/sys/bootblock.h: revision 1.59
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.16
	usr.sbin/installboot/installboot.h: revision 1.44
	sys/arch/hp300/stand/mkboot/volhdr.h: file removal
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.17
	sys/arch/hp300/dev/hpib.c: revision 1.45
	usr.sbin/installboot/installboot.h: revision 1.45
	usr.sbin/installboot/cd9660.c: revision 1.1
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.18
	sys/arch/hp300/dev/topcatreg.h: revision 1.3
	usr.sbin/installboot/cd9660.c: revision 1.2
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.19
	sys/arch/hp300/stand/inst/inst.c: revision 1.25
	sys/arch/hp300/stand/uboot/Makefile: revision 1.12
	sys/arch/hp300/dev/dvbox.c: revision 1.4
	sys/arch/hp300/dev/dma.c: revision 1.45
	sys/arch/hp300/stand/uboot/Makefile: revision 1.13
	sys/arch/hp300/stand/common/rd.c: revision 1.16
	sys/arch/hp300/stand/inst/Makefile: revision 1.12
	distrib/hp300/cdroms/installcd/Makefile: revision 1.4
	sys/arch/hp300/stand/mkboot/volhdr.h: revision 1.6
	sys/arch/hp300/stand/common/machdep.c: revision 1.16
	usr.sbin/installboot/fstypes.c: revision 1.14
	sys/arch/hp300/hp300/machdep.c: revision 1.238
	sys/arch/hp300/include/cpu.h: revision 1.73
	sys/arch/hp300/dev/diofbreg.h: revision 1.4
	sys/arch/hp300/stand/common/scsi.c: revision 1.12
	sys/arch/hp300/stand/common/netio.c: revision 1.19
	sys/arch/hp300/stand/common/scsi.c: revision 1.13
	sys/arch/hp300/dev/sti_sgc.c: revision 1.8
	sys/arch/hp300/dev/rtc.c: revision 1.22
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.20
	sys/arch/hp300/stand/common/conf.h: revision 1.4
	sys/arch/hp300/hp300/autoconf.c: revision 1.111
	sys/arch/hp300/stand/common/conf.c: revision 1.15
	sys/arch/hp300/stand/mkboot/Makefile: revision 1.12
	sys/arch/hp300/stand/mkboot/Makefile: revision 1.13
	sys/arch/hp300/hp300/autoconf.c: revision 1.114
	sys/arch/hp300/dev/dcmreg.h: revision 1.11
	sys/arch/hp300/dev/diofbvar.h: revision 1.4
	sys/arch/hp300/dev/dcm.c: revision 1.91
	sys/fs/cd9660/cd9660_util.c: revision 1.15
	sys/arch/hp300/dev/mcclock_frodo.c: revision 1.2

TAB/space cleanup.

installboot(8): formatting improvements

Use Ar foo instead of <foo>; this is mdoc.

Other formatting tweaks.
installboot(8): fix up markup

Don't overuse .Sy - when everything is highlighted, nothing is.  Use
.Ic for options &c to get correct PostScript output (both are bold in
plain text).

Use Aq Ar inside .Pa, as both Pa and Ar are rendered as underscored
text in plain text output, and the distinction is lost.

Don't set examples in bold, but give them .Pp space around - they are
much easier to read this way.

Use consistent -width in FILES.
document how to use installboot on netbsd/vax.

PR/57909: Jan-Benedict Glaw: Don't include (build) timestamp when doing a
reproducible build
fix usage string, improve error handling.
add missing chunk for repro-build. fix gcc warnings.
avoid stringop truncation, fix copyright string to prevent assembler warnings.

Fix build as a tool (Jan-Benedict Glaw)

Fix integer overflow of strtol(3) for "loadpoint" address on ILP32 hosts.

This strtol(3) was introduced in rev 1.12 for PR/57909 after netbsd-10,
but it returns LONG_MAX (0x7FFFFFFF) for 0xFFF00000 on ILP32 hosts and
the wrong loadpoint causes "NOT ENOUGH MEMORY" error by the BOOTROMs
on loading uboot.lif on (at least) my 9000/360 and 9000/425t.

Misc cosmetic changes for mostly readability.
- KNF and add some newlines per blocks
- define and use proper bintobcd() macro
- make local functions and variables static

The same uboot.lif binaries are generated.

Rename ${PROGAOUT} -> ${PROGELF} to reflect reality.
Use proper signedness for the LIF file system data structures.

Ancient 4.3BSD used short and int for location, file size, file type,
and addresses etc. but all of them should be unsigned.

Also rename several variables and add comments for readability.
The LIF file system info can be found in "The HPDir Project" page:
https://www.hp9845.net/9845/projects/hpdir/
The same uboot.lif binaries are generated.

Add a preliminary CD boot support to uboot for preparation of PR/54455.
Briefly tested on mame, but not enalbed yet.

Recognize SCSI CD-ROM devices as a booted device properly.

Necessary for PR port-hp300/54455, to boot an md root root RAMDISK

kernel from CD-ROM without "WARNING: can't find match for bootdev:"
prompt.

Sync with src/sys/arch/hp300/stand/mkboot/volhdr.h rev 1.6.
https://mail-index.netbsd.org/source-changes/2024/05/07/msg151195.html

Use proper signedness for the LIF file system data structures.
mkboot should use this MI <sys/bootblock.h> and volhdr.h should
be removed soon.

Use MI <sys/bootblock.h> to refer LIF filesystem structures.
This should have been done when LIF definitions were initially added
to <sys/bootblock.h> for MI installboot(8).

Enable SUPPORT_CD on uboot.

Make cd9660_util.c usable in userland tools like installboot(8).

This was partially done for src/distrib/cdrom/macppc_installboot,
but more strict prototypes are necessary for native binary builds.

Install cd9660 related system headers for tools installboot(8) builds.

Reorder function prototypes per source files.

Add cd9660 support to search a bootloader file in the target file system.

Also add CD boot support for hp300, using a bootloader file in cd9660 fs.
This is a tool's part to close PR/54455.

HP 9000/300 machines read LIF directory entry allocated after
the LIF volume header at the top of the boot disk during bootstrap,
and a bootstrap file must be contiguously allocated on the disk
due to limitation of the LIF specification.

Current NetBSD/hp300's bootloader is larger than ~80KB so we have
to prepare a special 'boot' partition for FFS (that has only 8KB (ffsv1)
or 32KB (ffsv2) spaces) disks to put such a large bootloader.

On the other hand, on ISO9660 fs all files are allocated contiguously
so we can specify a bootloader file in the target ISO9660 directly
in the LIF directory entry.

Note we can simply use the existing "append" option to create bootable
CD ISO for hp300, but it looks some emulators (at leaset MAME) reject
such non-standard ISO files, i.e. with an appended bootloader file at
the end of the image.

Put a RAMDISK kernel and SYS_UBOOT into hp300 installcd to make it bootable.

This should finally close PR/54455.

Fix tools build errors on Cygwin.

Appease warnings on building tools/installboot on Cygwin.

avoid stringop truncation, fix copyright string to prevent assembler warnings.

add missing chunk for repro-build. fix gcc warnings.

merge ktrace-lwp.

Pull up revision 1.10 (requested by jmc in ticket #1025):
  Convert mkboot into a full cross tool.  Last hurdle for hp300 to
  building on non NetBSD/bsd hosts.

Sync with HEAD.

Convert mkboot into a full cross tool. Last hurdle for hp300 to building on
non NetBSD/bsd hosts.

Catch up to -current

this is a HOSTPROG; no need to set LDSTATIC=-static

sync kqueue branch with HEAD

catch up with -current.

Catch up to -current.

arch/*/stand stuff should be LDSTATIC=-static and not LDSTATIC?=-static.
It doesn't make sense to have standalone stuff dynamically linked just
because an end-user uses LDSTATIC="".

Sync kqueue branch with -current.

Catch up to -current.

MKfoo=no -> NOfoo

Catch up to -current.

file Makefile was added on branch nathanw_sa on 2002-01-08 00:24:48 +0000

- remove dependency on libsa by mkboot since it is a host tool.
- adjust for endianness of host.

Cross-compiling of ELF bootblocks now works.

Sync with HEAD

Convert both bootblocks and mkboot to use libsa's loadfile(), and make
both ELF aware.

Apply patch (requested by he):
  Fix build problem during ``make release'', caused by missing
  just-cleaned executable in the release phase.

convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.

allow LDSTATIC definition to be overridden by bsd.own.mk/mk.conf

Link this program statically.

Complete and total reorganization of the hp300 boot code, modeled
closely after the build process used by NetBSD/alpha's boot code.