CVS log for src/sys/arch/hp300/stand/common/machdep.c

Up to [cvs.NetBSD.org] / src / sys / arch / hp300 / stand / common

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Pull up following revision(s) (requested by tsutsui in ticket #722):

	sys/fs/cd9660/cd9660_util.c: revision 1.16
	sys/arch/hp300/stand/common/clock.c: revision 1.14
	sys/arch/hp300/stand/common/scsireg.h: revision 1.5
	sys/arch/hp300/stand/common/scsireg.h: revision 1.6
	sys/arch/hp300/stand/Makefile.buildboot: revision 1.38
	sys/arch/hp300/include/bus.h: revision 1.23
	sys/arch/hp300/stand/Makefile.buildboot: revision 1.39
	sys/arch/hp300/stand/common/sd.c: revision 1.12
	sys/arch/hp300/stand/common/prf.c: revision 1.6
	sys/arch/hp300/stand/common/sd.c: revision 1.13
	usr.sbin/installboot/installboot.8: revision 1.106
	usr.sbin/installboot/Makefile: revision 1.59
	sys/arch/hp300/stand/common/devopen.c: revision 1.14
	usr.sbin/installboot/installboot.8: revision 1.107
	sys/arch/hp300/stand/common/ite_dumb.c: revision 1.2
	sys/arch/hp300/stand/common/devopen.c: revision 1.15
	usr.sbin/installboot/installboot.8: revision 1.108
	sys/fs/cd9660/cd9660_extern.h: revision 1.29
	usr.sbin/installboot/installboot.8: revision 1.109
	tools/Makefile.nbincludes: revision 1.11 (patch)
	sys/arch/hp300/dev/rboxreg.h: revision 1.3
	sys/arch/hp300/stand/common/scsivar.h: revision 1.5
	sys/arch/hp300/dev/dnkbd.c: revision 1.14
	sys/arch/hp300/hp300/trap.c: revision 1.156
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.12
	sys/arch/hp300/dev/frodoreg.h: revision 1.6
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.13
	sys/arch/hp300/stand/common/ite_sti.c: revision 1.2
	sys/arch/hp300/stand/common/hil.c: revision 1.15
	usr.sbin/installboot/arch/hp300.c: revision 1.18
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.14
	sys/arch/hp300/dev/rbox.c: revision 1.4
	usr.sbin/installboot/arch/hp300.c: revision 1.19
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.15
	sys/sys/bootblock.h: revision 1.59
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.16
	usr.sbin/installboot/installboot.h: revision 1.44
	sys/arch/hp300/stand/mkboot/volhdr.h: file removal
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.17
	sys/arch/hp300/dev/hpib.c: revision 1.45
	usr.sbin/installboot/installboot.h: revision 1.45
	usr.sbin/installboot/cd9660.c: revision 1.1
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.18
	sys/arch/hp300/dev/topcatreg.h: revision 1.3
	usr.sbin/installboot/cd9660.c: revision 1.2
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.19
	sys/arch/hp300/stand/inst/inst.c: revision 1.25
	sys/arch/hp300/stand/uboot/Makefile: revision 1.12
	sys/arch/hp300/dev/dvbox.c: revision 1.4
	sys/arch/hp300/dev/dma.c: revision 1.45
	sys/arch/hp300/stand/uboot/Makefile: revision 1.13
	sys/arch/hp300/stand/common/rd.c: revision 1.16
	sys/arch/hp300/stand/inst/Makefile: revision 1.12
	distrib/hp300/cdroms/installcd/Makefile: revision 1.4
	sys/arch/hp300/stand/mkboot/volhdr.h: revision 1.6
	sys/arch/hp300/stand/common/machdep.c: revision 1.16
	usr.sbin/installboot/fstypes.c: revision 1.14
	sys/arch/hp300/hp300/machdep.c: revision 1.238
	sys/arch/hp300/include/cpu.h: revision 1.73
	sys/arch/hp300/dev/diofbreg.h: revision 1.4
	sys/arch/hp300/stand/common/scsi.c: revision 1.12
	sys/arch/hp300/stand/common/netio.c: revision 1.19
	sys/arch/hp300/stand/common/scsi.c: revision 1.13
	sys/arch/hp300/dev/sti_sgc.c: revision 1.8
	sys/arch/hp300/dev/rtc.c: revision 1.22
	sys/arch/hp300/stand/mkboot/mkboot.c: revision 1.20
	sys/arch/hp300/stand/common/conf.h: revision 1.4
	sys/arch/hp300/hp300/autoconf.c: revision 1.111
	sys/arch/hp300/stand/common/conf.c: revision 1.15
	sys/arch/hp300/stand/mkboot/Makefile: revision 1.12
	sys/arch/hp300/stand/mkboot/Makefile: revision 1.13
	sys/arch/hp300/hp300/autoconf.c: revision 1.114
	sys/arch/hp300/dev/dcmreg.h: revision 1.11
	sys/arch/hp300/dev/diofbvar.h: revision 1.4
	sys/arch/hp300/dev/dcm.c: revision 1.91
	sys/fs/cd9660/cd9660_util.c: revision 1.15
	sys/arch/hp300/dev/mcclock_frodo.c: revision 1.2

TAB/space cleanup.

installboot(8): formatting improvements

Use Ar foo instead of <foo>; this is mdoc.

Other formatting tweaks.
installboot(8): fix up markup

Don't overuse .Sy - when everything is highlighted, nothing is.  Use
.Ic for options &c to get correct PostScript output (both are bold in
plain text).

Use Aq Ar inside .Pa, as both Pa and Ar are rendered as underscored
text in plain text output, and the distinction is lost.

Don't set examples in bold, but give them .Pp space around - they are
much easier to read this way.

Use consistent -width in FILES.
document how to use installboot on netbsd/vax.

PR/57909: Jan-Benedict Glaw: Don't include (build) timestamp when doing a
reproducible build
fix usage string, improve error handling.
add missing chunk for repro-build. fix gcc warnings.
avoid stringop truncation, fix copyright string to prevent assembler warnings.

Fix build as a tool (Jan-Benedict Glaw)

Fix integer overflow of strtol(3) for "loadpoint" address on ILP32 hosts.

This strtol(3) was introduced in rev 1.12 for PR/57909 after netbsd-10,
but it returns LONG_MAX (0x7FFFFFFF) for 0xFFF00000 on ILP32 hosts and
the wrong loadpoint causes "NOT ENOUGH MEMORY" error by the BOOTROMs
on loading uboot.lif on (at least) my 9000/360 and 9000/425t.

Misc cosmetic changes for mostly readability.
- KNF and add some newlines per blocks
- define and use proper bintobcd() macro
- make local functions and variables static

The same uboot.lif binaries are generated.

Rename ${PROGAOUT} -> ${PROGELF} to reflect reality.
Use proper signedness for the LIF file system data structures.

Ancient 4.3BSD used short and int for location, file size, file type,
and addresses etc. but all of them should be unsigned.

Also rename several variables and add comments for readability.
The LIF file system info can be found in "The HPDir Project" page:
https://www.hp9845.net/9845/projects/hpdir/
The same uboot.lif binaries are generated.

Add a preliminary CD boot support to uboot for preparation of PR/54455.
Briefly tested on mame, but not enalbed yet.

Recognize SCSI CD-ROM devices as a booted device properly.

Necessary for PR port-hp300/54455, to boot an md root root RAMDISK

kernel from CD-ROM without "WARNING: can't find match for bootdev:"
prompt.

Sync with src/sys/arch/hp300/stand/mkboot/volhdr.h rev 1.6.
https://mail-index.netbsd.org/source-changes/2024/05/07/msg151195.html

Use proper signedness for the LIF file system data structures.
mkboot should use this MI <sys/bootblock.h> and volhdr.h should
be removed soon.

Use MI <sys/bootblock.h> to refer LIF filesystem structures.
This should have been done when LIF definitions were initially added
to <sys/bootblock.h> for MI installboot(8).

Enable SUPPORT_CD on uboot.

Make cd9660_util.c usable in userland tools like installboot(8).

This was partially done for src/distrib/cdrom/macppc_installboot,
but more strict prototypes are necessary for native binary builds.

Install cd9660 related system headers for tools installboot(8) builds.

Reorder function prototypes per source files.

Add cd9660 support to search a bootloader file in the target file system.

Also add CD boot support for hp300, using a bootloader file in cd9660 fs.
This is a tool's part to close PR/54455.

HP 9000/300 machines read LIF directory entry allocated after
the LIF volume header at the top of the boot disk during bootstrap,
and a bootstrap file must be contiguously allocated on the disk
due to limitation of the LIF specification.

Current NetBSD/hp300's bootloader is larger than ~80KB so we have
to prepare a special 'boot' partition for FFS (that has only 8KB (ffsv1)
or 32KB (ffsv2) spaces) disks to put such a large bootloader.

On the other hand, on ISO9660 fs all files are allocated contiguously
so we can specify a bootloader file in the target ISO9660 directly
in the LIF directory entry.

Note we can simply use the existing "append" option to create bootable
CD ISO for hp300, but it looks some emulators (at leaset MAME) reject
such non-standard ISO files, i.e. with an appended bootloader file at
the end of the image.

Put a RAMDISK kernel and SYS_UBOOT into hp300 installcd to make it bootable.

This should finally close PR/54455.

Fix tools build errors on Cygwin.

Appease warnings on building tools/installboot on Cygwin.

TAB/space cleanup.

Sync with HEAD.

sync with head

Sync with HEAD

Remove clause 3 (UCB advertising clause) from the University of Utah
copyright.  Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.

Extra verification by snj@.

sync with head.

sync with head

sync with head

Identify models HP362 and HP382. From OpenBSD, tested on my HP382.

Note now options HP362 and options HP382 are required for these models
in your kernel config file.

merge ktrace-lwp.

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

Use ANSI function decls.

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Misc cleanup:
- KNF
- WARNSfy
- remove __P()
- remove register declarations
- const'ify some variables
- make some local functions/variables static
- bcopy -> memcpy
- bcmp -> memcmp
- bzero -> memset
- space/TAB fix
etc.

Use common m68k struct trapframe instead of rolling our own.

Move UCB-licensed code from 4-clause to 3-clause licence.

Patches provided by Joel Baker in PR 22364, verified by myself.

Sync with HEAD

Convert both bootblocks and mkboot to use libsa's loadfile(), and make
both ELF aware.

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

Pull up to last week's -current.

Recode the kernel transfer point entirely in assembly to completely
avoid compiler surprises.

Make sure the compiler doens't reuse the registers we use to convey
information to the kernel.

Update from trunk.

Add 385 and 425e SPU detection.  From OpenBSD.

Adjust start address here, now that exec() no longer does it for us.

- Always build the romputchar() glue.
- Don't set "userom" in the trap handler (we didn't before, but we've
  removed the previous CPP conditional that was used to enable it.)

Update getmachineid() for new machineid values.

Complete and total reorganization of the hp300 boot code, modeled
closely after the build process used by NetBSD/alpha's boot code.