CVS log for src/sys/arch/hp300/conf/majors.hp300

Up to [cvs.NetBSD.org] / src / sys / arch / hp300 / conf

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Merge changes from current as of 20200406

mark nsmb major obsolete

Sync with HEAD

Systematize handling of removed drivers.

 - Every driver that was removed and whose number hasn't already been
   reused is now listed with a commented-out "obsolete" line.
 - The format of these has been systematized. Future format changes can
   probably be safely done with a script.
 - This does not include a few cases of assignments that only lasted a
   couple days, or stuff from before major reorgs. Some of these may
   be included nonetheless, because there was a lot of ground to cover
   and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Sync with HEAD, resolve a few conflicts

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

update from HEAD

Pull up following revision(s) (requested by tsutsui in ticket #62):
	sys/arch/hp300/conf/files.hp300: revision 1.89
	share/man/man4/arcofi.4: revision 1.1
	share/man/man4/arcofi.4: revision 1.2
	share/man/man4/Makefile: revision 1.617
	sys/arch/hp300/hp300/intr.c: revision 1.41
	sys/conf/files: revision 1.1100
	sys/arch/hp300/hp300/locore.s: revision 1.171
	distrib/sets/lists/man/mi: revision 1.1486
	sys/dev/ic/arcofivar.h: revision 1.1
	sys/arch/hp300/conf/majors.hp300: revision 1.26
	sys/arch/hp300/dev/arcofi_dio.c: revision 1.1
	sys/arch/hp300/conf/GENERIC: revision 1.188
	sys/dev/ic/arcofi.c: revision 1.1
Add new arcofi(4) audio driver for NetBSD/hp300, ported from OpenBSD.
The arcofi(4) is a driver for the HP "Audio1" device
(Siemens PSB 2160 "ARCOFI" phone quality audio chip)
found on the HP9000/425e and HP9000/{705,710,745,747} models
(but only hp300 attachment is ported for now).
The chip supports 8-bit mono 8kHz U-law, A-law and
16-bit mono slinear_be formats.
The old HP9000/425e playing tunes with this new arcofi(4) audio driver
was also demonstrated at Open Source Conference 2014 Shimane.
Add a man page for arcofi(4) driver.  From OpenBSD.
Fix date.

Add new arcofi(4) audio driver for NetBSD/hp300, ported from OpenBSD.

The arcofi(4) is a driver for the HP "Audio1" device
(Siemens PSB 2160 "ARCOFI" phone quality audio chip)
found on the HP9000/425e and HP9000/{705,710,745,747} models
(but only hp300 attachment is ported for now).
The chip supports 8-bit mono 8kHz U-law, A-law and
16-bit mono slinear_be formats.

The old HP9000/425e playing tunes with this new arcofi(4) audio driver
was also demonstrated at Open Source Conference 2014 Shimane.

dependant -> dependent

Sync with HEAD.

sync with head

Remove trailing spaces.

sync with head

Sync with HEAD

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
  all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
  should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
  and I can't confirm that 362 and 382 actually have SGC bus.
  (I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
  once after keycode with NoSymbol problem is addressed.
  (We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
  cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
  grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

sync with head.

Sync with HEAD.

Sync with HEAD.

Update haad-dm branch to haad-dm-base2.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

Sync with HEAD.

sync with head

sync with HEAD

Sync with HEAD

Remove systrace. Ok core@.

Sync with head.

sync with head.

sync with head.

s/independant/independent/, from Zafer.

sync with head.

merge ktrace-lwp.

Sync with HEAD. Here we go again...

make VMSWAP optional again.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

defflag VMSWAP.

assign major for nsmb(4)

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Change reference at bottom from sys/dev/majors to sys/conf/majors to match
reality

Switch DCA and APCI serial devices to use MI com(4) driver.

DCA is tested on HP362 and HP382 with serial console,
but APCI on HP4xx is not tested yet.

add major for 'ses' for archs which have the other scsi devices

reassing majors for crypto and pf to use the newly defined MI major
range

update the comment - the space for machine-dependant majors
is reduced to 0-143
follows discussion on tech-kern

Add some framework for MI assignment of device majors - add sys/dev/majors
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.

Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.

Follows recent discussion on tech-kern@

create /dev/crypto

Add majors for MI SCSI devices (cd, ch, ss, and uk).

Reserve some major numbers for wscons, as per comments in hp300/conf.c
(which is in Attic) rev 1.47.

reserve cdev major # for PF.  ok'ed by technical-exec

Add ksyms device major.

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

file majors.hp300 was added on branch kqueue on 2002-10-10 18:32:36 +0000

assign majors for raw and cooked cgd's.

Catch up to -current.

file majors.hp300 was added on branch nathanw_sa on 2002-09-17 21:14:27 +0000

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

	device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
  by using this grammer.

- Added the new naming convention.
  The name of the device switch must be <prefix>_[bc]devsw for auto-generation
  of device switch tables.

- The backward compatibility of loading block/character device
  switch by LKM framework is broken. This is necessary to convert
  from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
  We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
  the LKM framework will refer it to assign device major number dynamically.

catch up with -current.

Add $NetBSD$

Add the list of block/character majors.

file majors.hp300 was initially added on branch gehenna-devsw.