CVS log for src/sys/arch/hp300/conf/INSTALL

Up to [cvs.NetBSD.org] / src / sys / arch / hp300 / conf

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
  file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
  and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Sync w/ HEAD.

Pull up following revision(s) (requested by tsutsui in ticket #1680):

	sys/arch/hp300/conf/INSTALL: revision 1.67
	sys/arch/hp300/conf/INSTALL: revision 1.68

Add missed 'nhpib at intio' for internal HP-IB.  Found on testing HPDisk.
Also fix comments for HP-IB devices.
Should be pulled up to netbsd-8 and netbsd-9.

Reduce maxusers to 8 as GENERIC.
Should be pulled up to netbsd-9 and netbsd-8.

Pull up following revision(s) (requested by tsutsui in ticket #1280):

	sys/arch/hp300/conf/INSTALL: revision 1.67
	sys/arch/hp300/conf/INSTALL: revision 1.68

Add missed 'nhpib at intio' for internal HP-IB.  Found on testing HPDisk.
Also fix comments for HP-IB devices.
Should be pulled up to netbsd-8 and netbsd-9.

Reduce maxusers to 8 as GENERIC.
Should be pulled up to netbsd-9 and netbsd-8.

sync with head

Reduce diffs from GENERIC for maintainability.

No functional change intended.

Reduce maxusers to 8 as GENERIC.

Should be pulled up to netbsd-9 and netbsd-8.

Add missed 'nhpib at intio' for internal HP-IB.  Found on testing HPDisk.

Also fix comments for HP-IB devices.
Should be pulled up to netbsd-8 and netbsd-9.

Pull up following revision(s) (requested by tsutsui in ticket #1152):

	sys/arch/hp300/conf/RAMDISK: revision 1.16
	sys/arch/hp300/conf/INSTALL: revision 1.66

Remove options (NVNODE, NBUF, and BUFPAGES) for small RAM machines.

These options make extracting binary sets much slower even on miniroot.

Instead, use "options BUFCACHE=5" (use 5% of memory for buffercache) and
also specify "-fno-unwind-tables" for COPTS to shrink INSTALL kernel.

Worth to pullup to netbsd-9.

Sync w/ HEAD.

Remove options (NVNODE, NBUF, and BUFPAGES) for small RAM machines.

These options make extracting binary sets much slower even on miniroot.
Instead, use "options BUFCACHE=5" (use 5% of memory for buffercache) and
also specify "-fno-unwind-tables" for COPTS to shrink INSTALL kernel.

Worth to pullup to netbsd-9.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Sync with HEAD

G/C "MAPPECOPY".  It is the deadest of wood, and never actually worked in
NetBSD.

Sync with HEAD

Resolve a couple of conflicts (result of the uimin/uimax changes)

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

update from HEAD

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
  since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
  many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Sync with HEAD

Remove TCP_COMPAT_42 from the config files. Pass 1.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Rebase to HEAD as of a few days ago.

Add commented out "#options COMPAT_70" to all kernel configuration
files that already had commented out "#options COMPAT_60".

Rebase.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

Pull up following revision(s) (requested by tsutsui in ticket #1058):
	sys/arch/hp300/conf/files.hp300: revision 1.88
	sys/arch/hp300/include/autoconf.h: revision 1.13
	sys/dev/ic/sti.c: revision 1.17
	sys/arch/hp300/dev/frodo.c: revision 1.31
	sys/arch/hp300/conf/GENERIC: revision 1.173
	sys/arch/hp300/hp300/machdep.c: revision 1.229
	sys/arch/hp300/dev/frodo.c: revision 1.32
	sys/arch/hp300/hp300/autoconf.c: revision 1.102
	sys/arch/hp300/dev/frodoreg.h: revision 1.5
	sys/arch/hp300/stand/common/ite_sti.c: revision 1.1
	sys/arch/hp300/stand/common/itevar.h: revision 1.16
	sys/arch/hp300/hp300/autoconf.c: revision 1.105
	sys/arch/hp300/dev/sti_sgcvar.h: revision 1.1
	sys/arch/hp300/stand/common/apci.c: revision 1.12
	sys/arch/hp300/stand/common/apci.c: revision 1.13
	sys/arch/hp300/dev/dnkbd.c: revision 1.6
	sys/arch/hp300/dev/dnkbd.c: revision 1.7
	sys/arch/hp300/stand/inst/version: revision 1.12
	sys/arch/hp300/dev/com_frodo.c: revision 1.9
	sys/arch/hp300/stand/common/ite.c: revision 1.17
	sys/arch/hp300/conf/GENERIC: revision 1.181
	sys/arch/hp300/dev/sti_sgc.c: revision 1.1
	sys/arch/hp300/stand/common/dnkbd.c: revision 1.13
	sys/arch/hp300/dev/sti_sgc.c: revision 1.2
	sys/dev/ic/stivar.h: revision 1.8
	sys/arch/hp300/dev/rtc.c: revision 1.21
	sys/arch/hp300/conf/INSTALL: revision 1.56
	sys/arch/hp300/conf/INSTALL: revision 1.58
	sys/arch/hp300/stand/uboot/version: revision 1.19
	sys/arch/hp300/stand/common/samachdep.h: revision 1.17
	sys/arch/hp300/stand/common/clock.c: revision 1.12
	sys/arch/hp300/dev/mcclock_frodo.c: revision 1.1
	sys/arch/hp300/stand/Makefile.buildboot: revision 1.34
	sys/arch/hp300/conf/files.hp300: revision 1.87
Add sti at sgc framebuffer.
Ported from OpenBSD by kiyohara@.
Fix a botch on switching from apci (and dca) to MI com(4) 10 years ago.
I.e. fix apci device address per FRODO_BASE macro change
in frodoreg.h rev 1.2.  Now bootloader works with serial console
on HP425e (which has only com at frodo).
Thanks to miod@openbsd for providing his 425e.
Add sti(4) at sgc screen console support.  From (the late) OpenBSD/hp300.
Tested on HP9000/425e, which was sent from Miod Vallat and
demonstrated at Open Source unConference 2014 Kagawa.
Check the service switch on 425e to select apci serial console.
Taken from OpenBSD/hp300.  See the following comment for details:
> * Check the service switch. On the 425e, this is a physical
> * switch, unlike other frodo-based machines, so we can use it
> * as a serial vs internal video selector, since the PROM can not
> * be configured for serial console.
Add proper RealTime Clock support for HP9000/425e.
As the OpenBSD/hp300 page says 425e doesn't have the traditional
RTC at intio (as it also lacks DCA 16550 serial at intio?),
but after a few hour investigation it turns out that
425e uses mc146818 compatible calendar clock in
the Apollo "frodo" utility chip and the frodo chip on
425e actually has the 32kHz OSC and is actually backed up
by the onboard lithium battery.
Tested on HP425e (with mcclock) and HP362 (with old rtc).
Add RTC support for HP9000/425e to bootloader too.
Also put several cleanup:
- make local functions and variables static
- use proper variable types
- some KNF
Note it turns out that extreme slowness of netboot on hp300 is
caused by the too slow access of the traditional RTC chip at intio
(i.e. netboot on 425e is so much faster than others). Oh well.
Add proper consinit(9) support for sti(4) at sgc framebuffer on hp300.
The cnattach functions for sti(4) and service switch check method
for 425e in com_frodo.c are taken from OpenBSD.
The strategy how to choose the console device in hp300_cninit() is
quite diverged from 4.4BSD and OpenBSD so it's tweaked by me.
Also put several changes in sti_sgc.c to reduce diffs from OpenBSD/hp300.
Tested on 425e and 362 (which still uses gendiofb(4), not sti(4)).
XXX: sti(4) requires uvm_km_alloc(9) and uvm_map_protect(9)
     to copy and call ROM functions on the executable memory region, so
     it can be called before UVM and related initializations are complete.
     Probably it's time to consider about MI "deferred consinit()" API
     in init_main.c (or elsewhere) for modern complicated VM system...
Also fix the apci device address in dnkbd.c as apci.c rev 1.12:
http://mail-index.netbsd.org/source-changes/2014/04/10/msg053940.html
Finally dnkbd(4) is confirmed working at least on bootloader.
Thanks again to Miod Vallat.
Make the Apollo Domain keyboard actually work.
Tested on HP9000/425e and the keyboard model A1630-82001 R2 (RX-60857-HW)
provided by Miod Vallat.  Mouse support needs more work.
Pull random notes on the Apollo Domain keyboard from ancient PR/3528.
Bump versions to denote recent 425e related changes.
Probe mcclock only on 425e to avoid an extra "not configured" message.
Add and enable sti(4) at sgc in install kernels for 425e.
Tested on both serial console and framebuffer console.
(switched by the service switch on the back panel)

Pull up following revision(s) (requested by tsutsui in ticket #1057):
	sys/arch/hp300/conf/RAMDISK: revision 1.14
	sys/arch/hp300/conf/INSTALL: revision 1.57
Add "pseudo-device wsmux" in INSTALL (and RAMDISK) kernels.
On NetBSD/hp300, hilkbd(4) is probed in config_interrupts(9)
so it's always attached after wsdisplay(4).  In that case,
wskbd can't be used as a console input device without wsmux(4).
(i.e. keyboard didn't work on installer using screen console)
Should be pulled up to all netbsd-6* branches.
Disable options NVNODE, NBUF and BUFPAGES in the RAMDISK kernel.
These options were specified in the INSTALL kernel for 4MB machines,
but nowadays even the INSTALL kernel would not boot on such machines
and the RAMDISK kernel assumes the target machine has more memories.
Furthermore, these options makes extracting binary sets much slower
and also could cause "wapbl_register_deallocation: out of resources"
panic during extracting binaries into a 32GB SSD with 4KB fragments.
Should be pulled up to netbsd-6* branches.

sync with head

Add and enable sti(4) at sgc in install kernels for 425e.

Tested on both serial console and framebuffer console.
(switched by the service switch on the back panel)

Add "pseudo-device wsmux" in INSTALL (and RAMDISK) kernels.

On NetBSD/hp300, hilkbd(4) is probed in config_interrupts(9)
so it's always attached after wsdisplay(4).  In that case,
wskbd can't be used as a console input device without wsmux(4).
(i.e. keyboard didn't work on installer using screen console)

Should be pulled up to all netbsd-6* branches.

Add proper RealTime Clock support for HP9000/425e.

As the OpenBSD/hp300 page says 425e doesn't have the traditional
RTC at intio (as it also lacks DCA 16550 serial at intio?),
but after a few hour investigation it turns out that
425e uses mc146818 compatible calendar clock in
the Apollo "frodo" utility chip and the frodo chip on
425e actually has the 32kHz OSC and is actually backed up
by the onboard lithium battery.

Tested on HP425e (with mcclock) and HP362 (with old rtc).

sync with head

G/C PFIL_HOOKS from the kernel configs.

resync from head

remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Resync to 2012-11-19 00:00:00 UTC

sync with head

Add commented out "#options COMPAT_60" to all kernel configuration files
that already had commented out "#options COMPAT_50".

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
  and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

sync with head

merge to -current.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself.  Move it to std.  This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports.  Thanks to Havard Eidnes for
pointing them out.

dependant -> dependent

Sync with HEAD.

sync with head

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

sync with head

Sync with HEAD

Pull basic SGC bus attachment from OpenBSD to test devices.
Disabled by default since there is no SGC drivers yet.

Add dumb framebuffer (no acceleration, no colormap) support
for HP362 and HP382.

Tested on A1473-69510 (HP362 VGA-res) and A1474-69511 (HP382 mid-res).

Add QUOTA2 where QUOTA is enabled (and QUOTA2 commented out where QUOTA
is commented out)

Sync with HEAD

Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
  all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
  should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
  and I can't confirm that 362 and 382 actually have SGC bus.
  (I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
  once after keycode with NoSymbol problem is addressed.
  (We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
  cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
  grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

sync with head.

sync with head

Sync with HEAD.

Remove unused count (invariably "4") from pseudo-device fss.

sync with head

Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

sync with head.

Sync with HEAD.

Sync with HEAD.

Add options COMPAT_50.

Update haad-dm branch to haad-dm-base2.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

Sync with HEAD.

Sync with HEAD.

Sync with wrstuden-revivesa-base-2.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

sync with HEAD

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree.  Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches.  The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

sync with head.

Sync with head.

Sync with head.

Sync with HEAD.

Add options COMPAT_40.

sync with head.

Sync with head.

sync with head

remove MALLOC_NOINLINE, it doesn't do anything anymore.

sync with head

sync with head

Identify models HP362 and HP382. From OpenBSD, tested on my HP382.

Note now options HP362 and options HP382 are required for these models
in your kernel config file.

sync with head.

Sync with head.

sync with head - hopefully this will work

sync with head.

Merge 2006-03-28 NetBSD-current into the "peter-altq" branch.

Disable KERNFS since installer will use dmesg(8).

sync with head.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

Sync with head.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Sync with HEAD. Here we go again...

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Pull up revision 1.24 (requested by tron in ticket #566):
Add (commented out) IPSEC_NAT_T option.

Add (commented out) IPSEC_NAT_T option.

sync with -current

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Sync with HEAD.

sync with head.

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Sync with HEAD.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
  have a disk.  Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sync with HEAD.

options<space><tab>

Sync with HEAD.

Add COMPAT_BSDPTY to the rest of the config files.

Fix the sync with head I botched.

Sync with HEAD.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Sync with HEAD

Remove the last vestiges of COMPAT_NOLABEL.  It's been 10 years; label
your disks already.

Sync with HEAD

Add options COMPAT_20.

Pull up revision 1.15 (requested by atatat in ticket #663):
	Add "options SYSCTL_INCLUDE_DESCR" to a lot of configurations,
	but commented out in most of them.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add an entry of "com0 at dio0 scode 9" so that /dev/ttyC0 and
compat symlink (/dev/tty0) are always reserved for DCA serial.

Switch DCA and APCI serial devices to use MI com(4) driver.

DCA is tested on HP362 and HP382 with serial console,
but APCI on HP4xx is not tested yet.

add COMPAT_15/COMPAT_16

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more.  see tech-security

Switch hp300 to MI SCSI with MI mb89352 SPC SCSI driver (at last),
and remove old hp300 MD oscsi support derived from 4.4BSD-Lite2.

Sync with HEAD.

Make the DMA controller a separate device attached to intio.  Intio
devices can use the DMA controller too.

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

enable USERCONF by default; it's small and extremely useful to have available.

sync kqueue branch with HEAD

Catch up to -current.

catch up with -current.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

catch up with -current on kqueue branch

Catch up to -current.

FPSP required.  Noted by Michael Wolfson.

Add the INCLUDE_CONFIG_FILE option to all config files.  In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Catch up to -current.

Add commented-out USERCONF option.  Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Include MFS in the INSTALL kernel for the miniroot install.

Catch up with -current.

Catch up to -current.

file INSTALL was added on branch kqueue on 2002-03-16 15:57:32 +0000

file INSTALL was added on branch nathanw_sa on 2002-02-28 04:09:22 +0000

Don't need printer support during installation.

Up-to-date kernels for installation media.