Revision 1.7.2.2, Wed Nov 27 13:46:44 2019 UTC (4 years, 4 months ago) by martin
Branch: netbsd-9
CVS Tags: netbsd-9-3-RELEASE, netbsd-9-2-RELEASE, netbsd-9-1-RELEASE, netbsd-9-0-RELEASE, netbsd-9-0-RC2, netbsd-9-0-RC1
Changes since 1.7.2.1: +2 -1 lines

Pull up following revision(s) (requested by jmcneill in ticket #491):

	sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
	sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
	sys/arch/arm/ti/ti_sysc.c: revision 1.1
	sys/arch/arm/ti/ti_rng.c: revision 1.1
	sys/arch/arm/ti/ti_rng.c: revision 1.2
	sys/dev/i2c/tps65950.c: file removal
	sys/arch/evbarm/conf/std.ti: file removal
	sys/dev/i2c/files.i2c: revision 1.101
	sys/dev/i2c/files.i2c: revision 1.102
	sys/dev/i2c/at24cxx.c: revision 1.32
	sys/dev/i2c/files.i2c: revision 1.103
	sys/dev/i2c/twl4030.c: revision 1.1
	sys/dev/i2c/files.i2c: revision 1.104
	sys/dev/i2c/twl4030.c: revision 1.2
	sys/dev/i2c/twl4030.c: revision 1.3
	sys/arch/arm/ti/ti_com.c: revision 1.6
	sys/arch/arm/ti/ti_com.c: revision 1.7
	sys/arch/arm/ti/ti_com.c: revision 1.8
	sys/dev/fdt/cpufreq_dt.c: revision 1.11
	sys/arch/arm/ti/ti_iic.c: revision 1.1
	sys/dev/fdt/cpufreq_dt.c: revision 1.12
	sys/arch/arm/ti/ti_usb.c: revision 1.1
	sys/arch/arm/ti/ti_iic.c: revision 1.2
	sys/dev/fdt/cpufreq_dt.c: revision 1.13
	sys/arch/arm/ti/ti_iic.c: revision 1.3
	sys/arch/arm/ti/ti_iic.c: revision 1.4
	sys/arch/evbarm/conf/files.ti: file removal
	sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
	sys/arch/arm/dts/omap3-n900.dts: revision 1.1
	sys/arch/arm/ti/ti_edma.h: revision 1.1
	sys/arch/evbarm/conf/OVERO_INSTALL: file removal
	sys/arch/arm/ti/ti_usbtll.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.5
	etc/etc.evbarm/Makefile.inc: revision 1.108
	sys/arch/arm/ti/files.ti: revision 1.6
	sys/dev/i2c/tps65217pmic.c: revision 1.13
	etc/etc.evbarm/Makefile.inc: revision 1.109
	sys/arch/arm/ti/files.ti: revision 1.7
	sys/dev/i2c/tps65217pmic.c: revision 1.14
	sys/arch/arm/ti/files.ti: revision 1.8
	sys/arch/arm/ti/files.ti: revision 1.9
	sys/dev/fdt/usbnopphy.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.55
	sys/arch/evbarm/conf/GENERIC: revision 1.56
	sys/arch/evbarm/conf/GENERIC: revision 1.57
	sys/arch/evbarm/conf/GENERIC: revision 1.58
	sys/arch/evbarm/conf/GENERIC: revision 1.59
	sys/arch/evbarm/conf/BEAGLEBONE: file removal
	sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
	sys/arch/arm/ti/ti_otgreg.h: revision 1.1
	sys/arch/arm/ti/ti_tptc.c: revision 1.1
	sys/arch/evbarm/conf/IGEPV2: file removal
	sys/arch/arm/ti/am3_prcm.c: revision 1.10
	sys/dev/i2c/tda19988.c: revision 1.1
	sys/arch/evbarm/conf/OVERO: file removal
	sys/dev/i2c/tda19988.c: revision 1.2
	sys/dev/i2c/tda19988.c: revision 1.3
	sys/arch/arm/ti/omap3_dss.c: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
	sys/arch/arm/ti/ti_omapintc.c: revision 1.2
	etc/etc.evbarm/Makefile.inc: revision 1.112
	etc/etc.evbarm/Makefile.inc: revision 1.113
	sys/arch/arm/ti/ti_div_clock.c: revision 1.1
	etc/etc.evbarm/Makefile.inc: revision 1.114
	sys/arch/evbarm/conf/N900: revision 1.32
	sys/arch/evbarm/conf/N900: revision 1.33
	distrib/utils/embedded/conf/armv7.conf: revision 1.36
	sys/arch/evbarm/conf/GENERIC: revision 1.60
	distrib/utils/embedded/conf/armv7.conf: revision 1.37
	sys/arch/arm/ti/omap2_nand.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.61
	sys/arch/arm/ti/omap2_nand.c: revision 1.2
	sys/arch/evbarm/conf/GENERIC: revision 1.62
	distrib/utils/embedded/conf/armv7.conf: revision 1.39
	sys/arch/evbarm/conf/GENERIC: revision 1.63
	sys/arch/arm/ti/ti_fb.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.64
	sys/arch/evbarm/conf/GENERIC: revision 1.65
	sys/arch/evbarm/conf/GENERIC: revision 1.66
	sys/arch/evbarm/conf/GENERIC: revision 1.67
	sys/arch/arm/ti/ti_platform.c: revision 1.7
	sys/arch/arm/ti/ti_platform.c: revision 1.8
	sys/arch/arm/ti/am3_prcm.c: revision 1.2
	sys/arch/arm/ti/ti_platform.c: revision 1.9
	sys/arch/arm/ti/am3_prcm.c: revision 1.3
	sys/arch/arm/ti/am3_prcm.c: revision 1.4
	sys/arch/arm/ti/am3_prcm.c: revision 1.5
	sys/arch/arm/ti/am3_prcm.c: revision 1.6
	sys/arch/arm/ti/am3_prcm.c: revision 1.7
	sys/arch/evbarm/conf/DEVKIT8000: file removal
	sys/arch/arm/ti/am3_prcm.c: revision 1.8
	sys/arch/arm/ti/am3_prcm.c: revision 1.9
	sys/dev/fdt/syscon.c: revision 1.4
	sys/arch/arm/ti/files.ti: revision 1.10
	sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
	sys/arch/arm/ti/ti_sdhc.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.11
	sys/arch/arm/ti/if_cpswreg.h: revision 1.1
	sys/arch/arm/ti/ti_sdhc.c: revision 1.2
	sys/arch/arm/ti/files.ti: revision 1.12
	sys/arch/arm/ti/ti_sdhc.c: revision 1.3
	sys/arch/arm/ti/files.ti: revision 1.13
	sys/arch/arm/ti/files.ti: revision 1.14
	sys/arch/arm/ti/files.ti: revision 1.15
	sys/arch/arm/ti/files.ti: revision 1.16
	sys/arch/arm/ti/omap3_cm.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.17
	sys/arch/arm/ti/omap3_cm.c: revision 1.2
	sys/arch/arm/ti/files.ti: revision 1.18
	sys/arch/arm/ti/omap3_cm.c: revision 1.3
	sys/arch/arm/ti/files.ti: revision 1.19
	sys/arch/arm/ti/omap3_cm.c: revision 1.4
	sys/arch/arm/ti/ti_motg.c: revision 1.1
	sys/arch/arm/ti/ti_rngreg.h: revision 1.1
	sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
	sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
	sys/arch/arm/ti/am3_platform.c: revision 1.1
	sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
	sys/arch/arm/ti/ti_lcdc.h: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
	sys/arch/evbarm/conf/README.evbarm: revision 1.22
	sys/arch/evbarm/conf/README.evbarm: revision 1.23
	sys/arch/arm/ti/ti_platform.c: file removal
	sys/arch/evbarm/conf/README.evbarm: revision 1.24
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
	sys/arch/arm/ti/ti_prcm.c: revision 1.2
	sys/arch/evbarm/conf/README.evbarm: revision 1.25
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
	sys/arch/arm/ti/ti_prcm.c: revision 1.3
	sys/arch/evbarm/conf/README.evbarm: revision 1.26
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
	sys/arch/evbarm/conf/README.evbarm: revision 1.27
	sys/arch/arm/ti/ti_ehci.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.20
	sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
	sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
	sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
	sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
	sys/arch/evbarm/conf/OVERO: revision 1.56
	sys/arch/evbarm/conf/TI: file removal
	sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
	sys/dev/fdt/fdtvar.h: revision 1.55
	sys/dev/fdt/fdtvar.h: revision 1.56
	distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
	sys/dev/fdt/fdt_phy.c: revision 1.6
	sys/arch/arm/ti/ti_iicreg.h: revision 1.1
	sys/arch/arm/ti/ti_lcdc.c: revision 1.1
	sys/arch/arm/ti/ti_gpio.c: revision 1.1
	sys/arch/arm/ti/ti_iicreg.h: revision 1.2
	sys/arch/arm/ti/ti_lcdc.c: revision 1.2
	sys/dev/fdt/files.fdt: revision 1.46
	sys/arch/arm/ti/ti_gpio.c: revision 1.2
	sys/arch/arm/ti/ti_iicreg.h: revision 1.3
	sys/arch/arm/ti/ti_lcdc.c: revision 1.3
	sys/dev/fdt/files.fdt: revision 1.47
	sys/arch/arm/ti/ti_gpio.c: revision 1.3
	sys/dev/fdt/pinctrl_single.c: revision 1.1
	sys/arch/evbarm/conf/files.generic: revision 1.9
	sys/arch/arm/ti/ti_gpmc.c: revision 1.1
	sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBOARD: file removal
	sys/arch/arm/ti/omap3_prm.c: revision 1.1
	sys/arch/arm/ti/ti_platform.h: file removal
	sys/arch/arm/ti/omap3_platform.c: revision 1.1
	sys/arch/arm/ti/ti_prcm.h: revision 1.2
	sys/arch/arm/ti/omap3_platform.c: revision 1.2
	sys/arch/arm/ti/ti_prcm.h: revision 1.3
	sys/arch/arm/ti/ti_prcm.h: revision 1.4
	sys/dev/fdt/fdt_clock.c: revision 1.9
	sys/arch/arm/ti/ti_edma.c: revision 1.1
	sys/arch/arm/ti/ti_otg.c: revision 1.1
	distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
	sys/arch/arm/ti/if_cpsw.c: revision 1.7
	sys/arch/evbarm/conf/std.igepv2: file removal
	sys/arch/arm/ti/if_cpsw.c: revision 1.8
	sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1

Adapt ti fdt glue to support GENERIC kernel.

Do not search 64-bit directories for dts files

Fix am33xx_platform_early_putchar for pre-MMU output

Add bus driver for TI sysc interconncet.

Make com work again

Add EDMA TPCC and TPTC drivers.

Add driver for one-register-per-pin type pinctrl devices.

Add MMCHS support.

Add USB support.

Disable autoidle

Place devmap above KERNEL_IO_VBASE

Use Timer2 for timecounter, and enable hw module.

Add support for TI AM335x

Add atmel,24c256 compat data

Add I2C support.

Add tiiic, tps65217pmic

Add FDT support

Fix early putchar, add reset func

No support for tegra210 in armv7 kernel

Switch to GENERIC kernels only.

Get mac address from DT

Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.

enumerate devices under child "clocks" node

Add support for platform specific opp table filters.

Add fdtbus_clock_count to count the number of clock references on a given node

enumerate devices under child "clocks" node

Add AM335x DVFS support.

Enable TI AM335x DVFS support

Add support for GPIO controller.

Add tigpio

Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).

Add support for hardware RNG.

Add tirng

Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty

Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c

Set stdout-path on TI OMAP3 BeagleBoard

Add support for TI OMAP3.

Add OMAP3 support.

Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.

Skip xref if it is 0

Add generic USB PHY driver

Add driver for TI TWL4030 Power Management IC

Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.

Add OMAP3 USB support.

Add twl, usbnopphy, tiusb, tiusbtll

Move omap3 dtb files to /boot/dtb

Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)

Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.

Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required

Set the stdout-path on xM like Ti OMAP3 BeagleBoard

Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)

Handle different register layout on OMAP3

Add omapfb to FDT-ized TI port.

Use dss as console on Nokia N900.

Enable IRQ status bits for omap3 type and set speed properly

Add RTC support

Remove tps65950pm (hardware now supported by twl4030.c)

Add NAND flash support.

Add tigpmc, omapnand

Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)

Fix non-FDT build

Cleanup and remove dependency on arch/arm/omap

Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties

Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.

Remove commented out IGEPV2 entry

OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.

No longer used.

Also match ti,omap2-onenand

Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context

Add driver for NXP TDA19988 HDMI encoder

Add support for AM335x display controller (LCDC).

Add tdahdmi, tilcdc, tifb

Test DRM_MODE_* flags, not VID_*

Comment out mode fixup (not needed it seems)

Use 297MHz for display clock

Select closest rate to desired pixel clock

Speed up mode setting a bit and turn off the display while changing modes