Annotation of src/sys/arch/evbarm/conf/MINI2440, Revision 1.28.4.1
1.28.4.1! bouyer 1: # $NetBSD: MINI2440,v 1.29 2020/04/18 11:00:38 skrll Exp $
1.1 nisimura 2: #
3: # MINI2440 -- Friendly ARM evaluation board based on Samsung S3C2440
4: #
5:
6: include "arch/evbarm/conf/std.mini2440"
7:
8: #options DEBUG
9: #options LOCKDEBUG
10: #options DIAGNOSTIC # internal consistency checks
11: #makeoptions DEBUG="-g3" # compile full symbol table
12: #makeoptions PROF="-pg"
13: #options GPROF
14: options DDB
15:
16: #options DEBUG_DMA
17: #options SSSDI_DEBUG
18: #options SDMMC_DEBUG
19: #options SDMMC_DUMP_CSD
20: #options MSDOSFS_DEBUG
21:
22: #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
23:
24: # Enable the hooks used for initializing the root memory-disk.
25: #options MEMORY_DISK_HOOKS
26: #options MEMORY_DISK_DYNAMIC
27: #options MEMORY_DISK_IS_ROOT # force root on memory disk
28: #options MEMORY_DISK_SERVER=1 # no userspace memory disk support
29: #options MEMORY_DISK_ROOT_SIZE=4096 # size of memory disk, in blocks
30: #options MEMORY_DISK_ROOT_SIZE=2880 # 1.44M, same as a floppy
31: #
32: options NFS_BOOT_BOOTP
33: options NFS_BOOT_DHCP
34:
35: # estimated number of users
36:
37: maxusers 32
38:
39: # Standard system options
40:
41: options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
42: options NTP # NTP phase/frequency locked loop
43:
44: # CPU options
45:
46: options CPU_ARM9 # Support the ARM9TDMI core
47: makeoptions CPUFLAGS="-march=armv4"
48: #options ARM9_CACHE_WRITE_THROUGH
49:
50: # Architecture options
51:
52: options S3C2XX0_XTAL_CLK=12000000 # 12MHz Xtal
53:
54: # File systems
55:
56: file-system FFS # UFS
57: #file-system LFS # log-structured file system
58: #file-system MFS # memory file system
59: file-system NFS # Network file system
60: #file-system ADOSFS # AmigaDOS-compatible file system
61: #file-system EXT2FS # second extended file system (linux)
62: #file-system CD9660 # ISO 9660 + Rock Ridge file system
1.2 nisimura 63: file-system MSDOSFS # MS-DOS file system
1.1 nisimura 64: file-system FDESC # /dev/fd
65: file-system KERNFS # /kern
66: #file-system NULLFS # loopback file system
67: file-system PROCFS # /proc
1.7 msaitoh 68: #file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
1.1 nisimura 69: #file-system UMAPFS # NULLFS + uid and gid remapping
70: #file-system UNION # union file system
71: file-system PTYFS # /dev/pts/N support
72:
73: # File system options
74: #options QUOTA # UFS quotas
1.20 rin 75: #options DISKLABEL_EI # disklabel Endian Independent support
1.15 riz 76: #options FFS_EI # FFS Endian Independent support
1.1 nisimura 77: #options NFSSERVER
78: #options SOFTDEP
1.2 nisimura 79: options WAPBL # File system journaling support - Experimental
1.1 nisimura 80: #options FFS_NO_SNAPSHOT # No FFS snapshot support
81:
82: # Networking options
83:
84: #options GATEWAY # packet forwarding
85: options INET # IP + ICMP + TCP + UDP
86: #options INET6 # IPV6
87: #options IPSEC # IP security
88: #options IPSEC_DEBUG # debug for IP security
89: #options MROUTING # IP multicast routing
90: #options PIM # Protocol Independent Multicast
91: #options NETATALK # AppleTalk networking
92: #options PPP_BSDCOMP # BSD-Compress compression support for PPP
93: #options PPP_DEFLATE # Deflate compression support for PPP
94: #options PPP_FILTER # Active filter support for PPP (requires bpf)
95: #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
96:
97: # These options enable verbose messages for several subsystems.
98: # Warning, these may compile large string tables into the kernel!
99: #options MIIVERBOSE # verbose PHY autoconfig messages
100: #options PCMCIAVERBOSE # verbose PCMCIA configuration messages
101: #options SCSIVERBOSE # human readable SCSI error messages
102: #options USBVERBOSE # verbose USB device autoconfig messages
103:
104:
105: # Compatibility options
106:
1.22 mrg 107: include "conf/compat_netbsd40.config"
108: options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
1.1 nisimura 109:
110: # Shared memory options
111:
112: #options SYSVMSG # System V-like message queues
113: #options SYSVSEM # System V-like semaphores
114: #options SYSVSHM # System V-like memory sharing
115:
116: # Miscellaneous kernel options
117: #options KTRACE # system call tracing, a la ktrace(1)
118: #options IRQSTATS # manage IRQ statistics
119: #options LKM # loadable kernel modules
120: #options SCSIVERBOSE # Verbose SCSI errors
121: #options PCIVERBOSE # Verbose PCI descriptions
122: #options MIIVERBOSE # Verbose MII autoconfuration messages
123: #options PCI_CONFIG_DUMP # verbosely dump PCI config space
124: #options PCI_NETBSD_CONFIGURE # Do not rely on BIOS/whatever to
125: # configure PCI devices
126: #options PCI_CONFIGURE_VERBOSE # Show PCI config information
127: #options PCI_DEBUG
128: options DDB_KEYCODE=0x1d # Enter ddb on ^]
129: #options USERCONF # userconf(4) support
130: #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
131: #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
132:
133: # Development and Debugging options
134:
135: #options ARM700BUGTRACK # track the ARM700 swi bug
136: #options PORTMASTER # Enable PortMaster only options
137: #options DIAGNOSTIC # internal consistency checks
1.28.4.1! bouyer 138: #options UVMHIST # kernhist for uvm/pmap subsystems
1.1 nisimura 139: #options UVMHIST
1.2 nisimura 140: #options VERBOSE_INIT_ARM # verbose bootstraping messages
1.1 nisimura 141: #options KGDB
142: #options DEBUG_KGDB
143: #options DDB # in-kernel debugger
144: #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
145: #makeoptions DEBUG="-g3" # compile full symbol table
146:
147: config netbsd root on ? type ?
148:
149: # The main bus device
150: mainbus0 at root
151:
152: # The boot CPU
153: cpu0 at mainbus?
154:
155: # Core logic on Samsung S3C2440
156: ssio0 at mainbus?
157: ssextio0 at ssio0
158:
159: # integrated UART
160: sscom0 at ssio? index 0
161: #sscom1 at ssio? index 1
162: #sscom2 at ssio? index 2
163: options SSCOM0CONSOLE
164: #options SSCOM1CONSOLE
165: options CONSPEED=115200
166: #options KGDB_DEVNAME="\"sscom1\"" # sscom0 or sscom1
167: #options KGDB_DEVRATE=115200
168:
169: # LCD
170: #device-major lcd char 145
171: lcd0 at ssio?
172: wsdisplay* at lcd? console ?
173: options WSEMUL_VT100 # VT100 / VT220 emulation
174: options WSDISPLAY_DEFAULTSCREENS=1
1.5 abs 175: #options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
1.1 nisimura 176: #options FONT_VT220L8x16
177: #options FONT_VT220L8x10
178: #options LCD_DEBUG
179:
180: sstouch0 at ssio?
181: wsmouse* at sstouch0 mux 0
182:
1.2 nisimura 183: ssrtc0 at ssio?
184:
1.1 nisimura 185: ssiis0 at ssio?
186: udassio* at ssiis0
187:
188: sssdi0 at ssio?
189: sdmmc* at sssdi0
190: ld* at sdmmc?
191:
192: # SPI port
193: #ssspi0 at ssio? index 0
194: #ssspi1 at ssio? index 1
195:
196: #vsdsp0 at ssspi0
197:
198: # on-board keyboard controller (Semtech SPICoder-SA01) via SPI1
199: #sskbd0 at ssspi1 intr 1
200: #wskbd* at sskbd? # console ?
201:
202: # SCSI bus support
203: scsibus* at scsi?
204:
205: # SCSI devices
206: sd* at scsibus? target ? lun ? # SCSI disk drives
207: #st* at scsibus? target ? lun ? # SCSI tape drives
208: #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
209: #ch* at scsibus? target ? lun ? # SCSI autochangers
210: #ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
211: #ss* at scsibus? target ? lun ? # SCSI scanners
212: #uk* at scsibus? target ? lun ? # SCSI unknown
213:
214: # ATAPI bus support
215: #atapibus* at atapi?
216:
217: # ATAPI devices
218: # flags have the same meaning as for IDE drives.
219: #cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
220: #sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
221: #st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
222: #uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
223:
224: # MIDI support
225: #midi* at midibus?
226: # midi* at pcppi? # MIDI interface to the PC speaker
227:
228: # Audio support
229: audio* at audiobus?
230:
1.19 christos 231: spkr* at audio? # PC speaker (synthesized)
1.17 nat 232:
1.1 nisimura 233: dme0 at ssextio? intr 7 addr 0x20000300
234:
235: #options MINI2440_ETHER_ADDR_FIXED="0x08,0x08,0x11,0x18,0x12,0x27"
236:
237: # built-in OHCI USB controller
238: ohci0 at ssio? addr 0x49000000 intr 26
239: #options OHCI_DEBUG
240: #
241: usb* at ohci0
242:
243: # USB Hubs
244: uhub* at usb?
245: uhub* at uhub? port ?
246:
247: # USB HID device
248: #uhidev* at uhub? port ? configuration ? interface ?
249:
250: # USB Mice
251: #ums* at uhidev? reportid ?
252: #wsmouse* at ums? mux 0
253:
254: # USB Keyboards
255: #ukbd* at uhidev? reportid ?
256: #wskbd* at ukbd? console ? mux 1
257:
258: # USB serial adapter
259: #ucycom* at uhidev? reportid ?
260:
261: # USB Generic HID devices
262: #uhid* at uhidev? reportid ?
263:
264: # USB Printer
265: #ulpt* at uhub? port ? configuration ? interface ?
266:
267: # USB Modem
268: #umodem* at uhub? port ? configuration ?
269: #ucom* at umodem?
270:
271: # USB Mass Storage
272: umass* at uhub? port ? configuration ? interface ?
273:
274: # USB audio
275: #uaudio* at uhub? port ? configuration ?
276:
277: # USB MIDI
278: #umidi* at uhub? port ? configuration ?
279:
280: # USB IrDA
281: # USB-IrDA bridge spec
282: #uirda* at uhub? port ? configuration ? interface ?
283: #irframe* at uirda?
284:
285: # SigmaTel STIr4200 USB/IrDA Bridge
286: #ustir* at uhub? port ?
287: #irframe* at ustir?
288:
1.24 rin 289: # MII/PHY support
1.26 rin 290: #rgephy* at mii? phy ? # Realtek 8169S/8110S/8211 PHYs
291: #rlphy* at mii? phy ? # Realtek 8139/8201L PHYs
1.24 rin 292: #ukphy* at mii? phy ? # generic unknown PHYs
293: #urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
294:
1.1 nisimura 295: # USB Ethernet adapters
296: #aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
297: #axe* at uhub? port ? # ASIX AX88172 based adapters
298: #cue* at uhub? port ? # CATC USB-EL1201A based adapters
299: #kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
1.24 rin 300: #mue* at uhub? port ? # Microchip LAN75xx/LAN78xx based adapters
1.26 rin 301: #ure* at uhub? port ? # Realtek RTL8152/RTL8153 based adapters
1.1 nisimura 302: #url* at uhub? port ? # Realtek RTL8150L based adapters
303:
304: # Prolific PL2301/PL2302 host-to-host adapter
305: #upl* at uhub? port ?
306:
307: # Serial adapters
308: #ubsa* at uhub? port ? # Belkin serial adapter
309: #ucom* at ubsa? portno ?
310: #
311: #uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
312: #ucom* at uftdi? portno ?
313: #
314: #umct* at uhub? port ? # MCT USB-RS232 serial adapter
315: #ucom* at umct? portno ?
316: #
317: #uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
318: #ucom* at uplcom? portno ?
319: #
320: #uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
321: #ucom* at uvscom? portno ?
322:
323: # USB Handspring Visor
324: #uvisor* at uhub? port ?
325: #ucom* at uvisor?
326:
327: # Kyocera AIR-EDGE PHONE
328: #ukyopon* at uhub? port ?
329: #ucom* at ukyopon? portno ?
330:
331: # USB scanners
332: #uscanner* at uhub? port ?
333:
334: # USB scanners that use SCSI emulation, e.g., HP5300
335: #usscanner* at uhub? port ?
336:
337: # Y@P firmware loader
338: #uyap* at uhub? port ?
339:
340: # D-Link DSB-R100 USB radio
341: #udsbr* at uhub? port ?
342: #radio* at udsbr?
343:
344: # USB Generic driver
345: #ugen* at uhub? port ?
346:
347: # Pseudo-Devices
348:
349: # disk/mass storage pseudo-devices
1.10 christos 350: #pseudo-device md # memory disk device (ramdisk)
1.1 nisimura 351: pseudo-device vnd # disk-like interface to files
1.10 christos 352: #pseudo-device fss # file system snapshot device
1.7 msaitoh 353: #pseudo-device putter # for puffs and pud
1.1 nisimura 354:
355: # network pseudo-devices
1.4 nisimura 356: pseudo-device bpfilter # Berkeley packet filter
1.23 maxv 357: #pseudo-device npf # NPF packet filter
1.1 nisimura 358: pseudo-device loop # network loopback
359: #pseudo-device ppp # Point-to-Point Protocol
360: #pseudo-device pppoe # PPP over Ethernet (RFC 2516)
361: #pseudo-device sl # Serial Line IP
362: #pseudo-device irframetty # IrDA frame line discipline
363: #pseudo-device tun # network tunneling over tty
364: #pseudo-device tap # virtual Ethernet
365: #pseudo-device gre # generic L3 over IP tunnel
366: #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
367: #pseudo-device faith # IPv[46] tcp relay translation i/f
368: #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
369: #pseudo-device vlan # IEEE 802.1q encapsulation
370: #pseudo-device bridge # simple inter-network bridging
371: #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
372:
373: # miscellaneous pseudo-devices
374: pseudo-device pty # pseudo-terminals
375: #pseudo-device rnd # /dev/random and in-kernel generator
376: pseudo-device clockctl # user control of clock subsystem
377:
378: # wscons pseudo-devices
379: pseudo-device wsmux # mouse & keyboard multiplexor
380: #pseudo-device wsfont
381:
382: pseudo-device ksyms # /dev/ksyms
CVSweb <webmaster@jp.NetBSD.org>
![[BACK]](/icons/back.gif){kind=icon}
Return to MINI2440 CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / sys / arch / evbarm / conf