Annotation of src/sys/arch/evbarm/conf/HDL_G, Revision 1.7
1.7 ! drochner 1: # $NetBSD: HDL_G,v 1.6 2006/11/11 18:47:09 jmmv Exp $
1.1 nonaka 2: #
3: # HDL_G -- I-O DATA HDL-G Kernel
4: #
5:
6: include "arch/evbarm/conf/std.hdl_g"
7:
8: #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
9:
10: maxusers 32 # estimated number of users
11:
12: # CPU options
13:
14: # For XScale systems
15: options CPU_XSCALE_80321 # Support the XScale core
16: makeoptions CPUFLAGS="-mcpu=xscale"
17:
18: # Architecture options
19: options XSCALE_CACHE_READ_WRITE_ALLOCATE
20:
21: # Standard system options
22:
23: options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
24: #options HZ=512 # clock interrupt generates every 1/HZ sec
25: #options NTP # NTP phase/frequency locked loop
26:
27: # File systems
28:
29: file-system FFS # UFS
30: file-system EXT2FS # second extended file system (linux)
31: #file-system LFS # log-structured file system
32: file-system MFS # memory file system
33: file-system NFS # Network file system
34: file-system CD9660 # ISO 9660 + Rock Ridge file system
35: #file-system CODA # Coda File System; also needs vcoda (below)
36: file-system FDESC # /dev/fd
37: file-system KERNFS # /kern
38: file-system MSDOSFS # MS-DOS file system
39: file-system NTFS # Windows/NT file system (experimental)
40: file-system NULLFS # loopback file system
41: #file-system OVERLAY # overlay file system
42: #file-system PORTAL # portal filesystem (still experimental)
43: file-system PROCFS # /proc
44: file-system PTYFS # /dev/pts/N support
45: file-system SMBFS # experimental - CIFS; also needs nsmb (below)
1.6 jmmv 46: file-system TMPFS # Efficient memory file-system
1.1 nonaka 47: #file-system UDF # experimental - OSTA UDF CD/DVD file-system
48: file-system UMAPFS # NULLFS + uid and gid remapping
49: file-system UNION # union file system
50:
51: # File system options
52: #options QUOTA # UFS quotas
53: #options FFS_EI # FFS Endian Independant support
54: options NFSSERVER
55: #options SOFTDEP
56: #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
57: #options FFS_NO_SNAPSHOT # No FFS snapshot support
58: #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
59: # immutable) behave as system flags.
60:
61: # Networking options
62:
63: #options GATEWAY # packet forwarding
64: options INET # IP + ICMP + TCP + UDP
65: options INET6 # IPV6
66: #options IPSEC # IP security
67: #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
68: #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
69: #options IPSEC_DEBUG # debug for IP security
70: #options MROUTING # IP multicast routing
71: #options PIM # Protocol Independent Multicast
72: #options ISO,TPIP # OSI
73: #options EON # OSI tunneling over IP
74: #options NETATALK # AppleTalk networking
75: #options PFIL_HOOKS # pfil(9) packet filter hooks
76: #options PPP_BSDCOMP # BSD-Compress compression support for PPP
77: #options PPP_DEFLATE # Deflate compression support for PPP
78: #options PPP_FILTER # Active filter support for PPP (requires bpf)
79: #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
80: #options TCP_SIGNATURE
81:
82: #options NFS_BOOT_BOOTP
83: options NFS_BOOT_DHCP
84: options NFS_BOOT_BOOTPARAM
85:
86: # Compatibility options
87:
88: options COMPAT_09 # NetBSD 0.9 compatibility.
89: options COMPAT_10 # NetBSD 1.0 compatibility.
90: options COMPAT_11 # NetBSD 1.1 compatibility.
91: options COMPAT_12 # NetBSD 1.2 compatibility.
92: options COMPAT_13 # NetBSD 1.3 compatibility.
93: options COMPAT_14 # NetBSD 1.4 compatibility.
94: options COMPAT_15 # NetBSD 1.5 compatibility.
95: options COMPAT_16 # NetBSD 1.6 compatibility.
96: options COMPAT_20 # NetBSD 2.0 compatibility.
97: options COMPAT_30 # NetBSD 3.0 compatibility.
98: options COMPAT_43 # 4.3BSD compatibility.
99: #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
100:
101: options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
102: options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
103:
104: # Shared memory options
105:
106: options SYSVMSG # System V-like message queues
107: options SYSVSEM # System V-like semaphores
108: #options SEMMNI=10 # number of semaphore identifiers
109: #options SEMMNS=60 # number of semaphores in system
110: #options SEMUME=10 # max number of undo entries per process
111: #options SEMMNU=30 # number of undo structures in system
112: options SYSVSHM # System V-like memory sharing
113: #options SHMMAXPGS=1024 # 1024 pages is the default
114: options P1003_1B_SEMAPHORE # p1003.1b semaphore support
115:
116: # Device options
117:
118: # Miscellaneous kernel options
119: options KTRACE # system call tracing via ktrace(1)
1.3 christos 120: #options SYSTRACE # system call vetting via systrace(1)
1.1 nonaka 121: options IRQSTATS # manage IRQ statistics
122: #options LKM # loadable kernel modules
123: #options KMEMSTATS # kernel memory statistics
124: #options SCSIVERBOSE # Verbose SCSI errors
125: options PCIVERBOSE # Verbose PCI descriptions
126: options MIIVERBOSE # Verbose MII autoconfuration messages
127: options USBVERBOSE # verbose USB device autoconfig messages
128: #options PCI_CONFIG_DUMP # verbosely dump PCI config space
129: options USERCONF # userconf(4) support
130: #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
131: #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
132:
133: # Development and Debugging options
134:
135: #options PERFCTRS # performance counters
136: #options DIAGNOSTIC # internally consistency checks
137: #options DEBUG
138: #options PMAP_DEBUG # Enable pmap_debug_level code
139: #options IPKDB # remote kernel debugging
140: #options VERBOSE_INIT_ARM # verbose bootstraping messages
141: options DDB # in-kernel debugger
142: #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
143: #makeoptions DEBUG="-g" # compile full symbol table
144: options SYMTAB_SPACE=512000
145:
146: #config netbsd root on ? type ?
147: config netbsd root on wd0a type ?
148: #config netbsd root on wd0e type ?
149:
150: # The main bus device
151: mainbus0 at root
152:
153: # The boot CPU
154: cpu0 at mainbus?
155:
156: # On-board device support
157: obio* at mainbus?
158: com0 at obio? addr 0xfe800000 xint 3 # on-board TI 165C50 UART
159: btn0 at obio? addr 0xfe8d0002 xint 3 # buttons
160:
161: # i80321 I/O Processor peripheral support
162: iopxs* at mainbus?
163:
164: iopiic* at iopxs? # I2C Controller Unit(s)
165: iic0 at iopiic?
166: iic1 at iopiic?
167: pci0 at iopxs? bus ? # PCI/PCI-X support
168:
169: # PCI-PCI bridges
170: ppb* at pci? dev ? function ?
171: pci* at ppb? bus ?
172:
173: # RICOH RS5C372A Real-Time Clock
174: rs5c372rtc* at iic0 addr 0x32
175:
176: #
177: # Storage devices
178: #
179:
180: # SCSI Controllers and Devices
181:
182: # SCSI bus support
183: scsibus* at scsi?
184:
185: # SCSI devices
186: sd* at scsibus? target ? lun ? # SCSI disk drives
187: st* at scsibus? target ? lun ? # SCSI tape drives
188: cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
189: ch* at scsibus? target ? lun ? # SCSI autochangers
190: ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
191: ss* at scsibus? target ? lun ? # SCSI scanners
192: uk* at scsibus? target ? lun ? # SCSI unknown
193:
194: # PCI IDE/S-ATA controllers and devices
195: pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
196: acardide* at pci? dev ? function ? # Acard IDE controllers
197:
198: # ATA (IDE) bus support
199: atabus* at ata? channel ?
200:
201: # IDE drives
202: # Flags are used only with controllers that support DMA operations
203: # and mode settings (e.g. some pciide controllers)
204: # The lowest order four bits (rightmost digit) of the flags define the PIO
205: # mode to use, the next set of four bits the DMA mode and the third set the
206: # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
207: # to use, and the last bit must be 1 for this setting to be used.
208: # For DMA and UDMA, 0xf (1111) means 'disable'.
209: # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
210: # (0xc=1100, 0xa=1010, 0xf=1111)
211: # 0x0000 means "use whatever the drive claims to support".
212: wd* at atabus? drive ? flags 0x0000
213:
214: # ATAPI bus support
215: atapibus* at atapi?
216:
217: # ATAPI devices
218: # flags have the same meaning as for IDE drives.
219: cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
220: sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
221: st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
222: uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
223:
224: #
225: # Networking devices
226: #
227:
228: # PCI network devices
229: wm* at pci? dev ? function ? # Intel i82541PI Gig-E
230:
231: # MII/PHY support
232: acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
233: amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
234: bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
235: brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
236: ciphy* at mii? phy ? # Cicada CS8201 Gig-E PHYs
237: dmphy* at mii? phy ? # Davicom DM9101 PHYs
238: exphy* at mii? phy ? # 3Com internal PHYs
239: gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
240: glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
241: gphyter* at mii? phy ? # NS83861 Gig-E PHY
242: icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
243: igphy* at mii? phy ? # Intel IGP01E1000
244: inphy* at mii? phy ? # Intel 82555 PHYs
245: iophy* at mii? phy ? # Intel 82553 PHYs
246: lxtphy* at mii? phy ? # Level One LXT-970 PHYs
247: makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
248: nsphy* at mii? phy ? # NS83840 PHYs
249: nsphyter* at mii? phy ? # NS83843 PHYs
250: pnaphy* at mii? phy ? # generic HomePNA PHYs
251: qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
252: rgephy* at mii? phy ? # Realtek 8169S/8110 internal PHYs
253: sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
254: tlphy* at mii? phy ? # ThunderLAN PHYs
255: tqphy* at mii? phy ? # TDK Semiconductor PHYs
256: ukphy* at mii? phy ? # generic unknown PHYs
257: urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
258:
259:
260: # USB Controller and Devices
261:
262: # PCI USB controllers
263: ehci* at pci? dev ? function ? # Enhanced Host Controller
264: ohci* at pci? dev ? function ? # Open Host Controller
265:
266: # USB bus support
267: usb* at ehci?
268: usb* at ohci?
269:
270: # USB Hubs
271: uhub* at usb?
1.7 ! drochner 272: uhub* at uhub? port ?
1.1 nonaka 273:
274: # USB HID device
275: uhidev* at uhub? port ? configuration ? interface ?
276:
277: # USB Mice
278: ums* at uhidev? reportid ?
279: wsmouse* at ums? mux 0
280:
281: # USB Keyboards
282: ukbd* at uhidev? reportid ?
283: wskbd* at ukbd? console ? mux 1
284:
1.4 skrll 285: # USB serial adapter
1.1 nonaka 286: ucycom* at uhidev? reportid ?
287:
288: # USB Generic HID devices
289: uhid* at uhidev? reportid ?
290:
291: # USB Printer
292: ulpt* at uhub? port ? configuration ? interface ?
293:
294: # USB Modem
295: umodem* at uhub? port ? configuration ?
296: ucom* at umodem?
297:
298: # USB Mass Storage
299: umass* at uhub? port ? configuration ? interface ?
300: wd* at umass?
301:
302: # USB audio
303: uaudio* at uhub? port ? configuration ?
304:
305: # USB MIDI
306: umidi* at uhub? port ? configuration ?
307:
308: # USB IrDA
309: # USB-IrDA bridge spec
310: uirda* at uhub? port ? configuration ? interface ?
311: irframe* at uirda?
312:
313: # SigmaTel STIr4200 USB/IrDA Bridge
314: ustir* at uhub? port ?
315: irframe* at ustir?
316:
317: # USB Ethernet adapters
318: aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
319: axe* at uhub? port ? # ASIX AX88172 based adapters
320: cdce* at uhub? port ? # CDC, Ethernet Networking Control Model
321: cue* at uhub? port ? # CATC USB-EL1201A based adapters
322: kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
323: udav* at uhub? port ? # Davicom DM9601 based adapters
324: url* at uhub? port ? # Realtek RTL8150L based adapters
325:
326: # USB 802.11b adapters
327: atu* at uhub? port ? # Atmel AT76C50XX based adapters
328: ral* at uhub? port ? # Ralink Technology RT25x0 802.11a/b/g
329:
330: # Prolific PL2301/PL2302 host-to-host adapter
331: upl* at uhub? port ?
332:
333: # Serial adapters
334: ubsa* at uhub? port ? # Belkin serial adapter
335: ucom* at ubsa? portno ?
336:
337: uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
338: ucom* at uftdi? portno ?
339:
340: umct* at uhub? port ? # MCT USB-RS232 serial adapter
341: ucom* at umct? portno ?
342:
343: uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
344: ucom* at uplcom? portno ?
345:
346: uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
347: ucom* at uvscom? portno ?
348:
349: # Diamond Multimedia Rio 500
350: urio* at uhub? port ?
351:
352: # USB Handspring Visor
353: uvisor* at uhub? port ?
354: ucom* at uvisor?
355:
356: # Kyocera AIR-EDGE PHONE
357: ukyopon* at uhub? port ?
358: ucom* at ukyopon? portno ?
359:
360: # USB scanners
361: uscanner* at uhub? port ?
362:
363: # USB scanners that use SCSI emulation, e.g., HP5300
364: usscanner* at uhub? port ?
365:
366: # Y@P firmware loader
367: uyap* at uhub? port ?
368:
369: # D-Link DSB-R100 USB radio
370: udsbr* at uhub? port ?
371: radio* at udsbr?
372:
373: # USB Generic driver
374: ugen* at uhub? port ?
375:
376:
377: # Audio Devices
378:
379: # Audio support
380: audio* at audiobus?
381:
382: # MIDI support
383: midi* at midibus?
384:
385:
386: # Pseudo-Devices
387:
388: # disk/mass storage pseudo-devices
389: #pseudo-device ccd 4 # concatenated/striped disk devices
390: #pseudo-device cgd 4 # cryptographic disk devices
391: #pseudo-device raid 8 # RAIDframe disk driver
392: #options RAID_AUTOCONFIG # auto-configuration of RAID components
393: # Options to enable various other RAIDframe RAID types.
394: #options RF_INCLUDE_EVENODD=1
395: #options RF_INCLUDE_RAID5_RS=1
396: #options RF_INCLUDE_PARITYLOGGING=1
397: #options RF_INCLUDE_CHAINDECLUSTER=1
398: #options RF_INCLUDE_INTERDECLUSTER=1
399: #options RF_INCLUDE_PARITY_DECLUSTERING=1
400: #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
401: #pseudo-device fss 4 # file system snapshot device
402:
403: #pseudo-device md 1 # memory disk device (ramdisk)
404: pseudo-device vnd 4 # disk-like interface to files
405: options VND_COMPRESSION # compressed vnd(4)
406:
407: # network pseudo-devices
408: pseudo-device bpfilter # Berkeley packet filter
409: pseudo-device ipfilter # IP filter (firewall) and NAT
410: pseudo-device loop # network loopback
411: pseudo-device ppp # Point-to-Point Protocol
412: pseudo-device pppoe # PPP over Ethernet (RFC 2516)
413: #pseudo-device sl # Serial Line IP
414: #pseudo-device strip # Starmode Radio IP (Metricom)
415: #pseudo-device irframetty # IrDA frame line discipline
416: pseudo-device tap # virtual Ethernet
417: pseudo-device tun # network tunneling over tty
418: pseudo-device gre # generic L3 over IP tunnel
419: pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
420: pseudo-device faith # IPv[46] tcp relay translation i/f
421: pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
422: pseudo-device vlan # IEEE 802.1q encapsulation
423: pseudo-device bridge # simple inter-network bridging
424: options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
425: pseudo-device pf # PF packet filter
426: pseudo-device pflog # PF log if
427: #pseudo-device kttcp
428:
429: # miscellaneous pseudo-devices
430: pseudo-device pty # pseudo-terminals
431: pseudo-device sequencer # MIDI sequencer
432: pseudo-device rnd # /dev/random and in-kernel generator
433: pseudo-device clockctl # user control of clock subsystem
434: pseudo-device ksyms # /dev/ksyms
435:
436: # a pseudo device needed for Coda # also needs CODA (above)
437: #pseudo-device vcoda 4 # coda minicache <-> venus comm.
438:
439: # a pseudo device needed for SMBFS
440: pseudo-device nsmb # experimental - SMB requester
441:
442: # a pseudo device needed for verified exec
443: #pseudo-device veriexec 1
444:
445: # data mover pseudo-devices
446: pseudo-device swdmover # softare dmover(9) back-end
447: pseudo-device dmoverio # /dev/dmover dmover(9) interface
CVSweb <webmaster@jp.NetBSD.org>