Up to [cvs.NetBSD.org] / src / sys / arch / evbarm / conf
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
Sync with HEAD
Remove TEGRA kernel config.
Add ure(4) to kernel config files. Also add PHY drivers where necessary.
Sync with HEAD Resolve a couple of conflicts (result of the uimin/uimax changes)
Note EARLYCONS in comment
Sync with HEAD
Remove "options IPKDB", and the other associated options, from the config files. ipkdb is being retired. Its code is really old, and hasn't kept pace with today's expectations: IPv6, SMP, modern NICs. The associated code for x86 was already removed because it was too incorrect to stay. There are plans to rewrite a similar feature from scratch. ok kamil christos
Attach simplebus on pass 0
cpus: use fdt_add_bus
Allow nodes to attach child devices using the same sorting rules as used by the simplebus driver.
update from HEAD
file TEGRA was added on branch tls-maxphys on 2017-12-03 11:36:03 +0000
More PCIe / XUSBPAD initialization goo for Tegra210.
add wskbd at gpiokeys
Enable max77620pmic and tcagpio
Replace unused mpio driver with a more generic interface for pinmux, and add Tegra210 pinmux support.
Add basic tegra210 xusbpad driver, shorten tegra*xusbpad driver names to tegra*xpad to fit in dv_xname
The xusbpad driver is tegra 124 specific so split it out into a separate driver. Add (not yet working) tegra 210 support to the xusb driver.
Include tegra210 dts files with kernel build
Sync with HEAD
Add support for NVIDIA Tegra X1.
Add options SOC_TEGRA210
Pull up following revision(s) (requested by jmcneill in ticket #114): sys/arch/arm/samsung/exynos_intr.h: revision 1.3 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3 sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1 distrib/utils/embedded/mkimage: revision 1.66 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4 sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6 sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7 sys/dev/gpio/gpio.c: revision 1.59 sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1 sys/conf/Makefile.kern.inc: revision 1.257 sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2 sys/conf/Makefile.kern.inc: revision 1.258 sys/arch/arm/fdt/psci_fdt.h: revision 1.1 sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1 sys/arch/evbarm/conf/files.sunxi: revision 1.1 sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8 sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9 sys/arch/arm/samsung/files.exynos: revision 1.22 distrib/utils/embedded/conf/armv7.conf: revision 1.13 sys/arch/arm/samsung/files.exynos: revision 1.23 sys/arch/evbarm/conf/std.tegra: revision 1.15 distrib/utils/embedded/conf/armv7.conf: revision 1.14 sys/arch/arm/samsung/files.exynos: revision 1.24 distrib/utils/embedded/conf/armv7.conf: revision 1.15 sys/arch/evbarm/sunxi/genassym.cf: revision 1.1 sys/arch/arm/samsung/exynos_fdt.c: file removal sys/dev/fdt/fdt_pinctrl.c: revision 1.4 sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2 sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1 sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1 sys/dev/usb/ehci.c: revision 1.255 sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2 sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1 sys/dev/ic/dwc_mmc.c: revision 1.11 sys/arch/arm/cortex/gic.c: revision 1.24 distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17 etc/etc.evbarm/Makefile.inc: revision 1.87 etc/etc.evbarm/Makefile.inc: revision 1.88 sys/arch/arm/fdt/gic_fdt.c: revision 1.5 etc/Makefile: revision 1.429 sys/arch/arm/fdt/gic_fdt.c: revision 1.6 sys/arch/arm/fdt/gic_fdt.c: revision 1.7 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2 sys/arch/evbarm/conf/std.sunxi: revision 1.1 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3 sys/arch/evbarm/conf/std.sunxi: revision 1.2 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4 sys/arch/evbarm/conf/std.sunxi: revision 1.3 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5 sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1 sys/dev/gpio/gpiovar.h: revision 1.17 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7 sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8 sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1 sys/arch/arm/samsung/exynos_i2c.c: revision 1.12 sys/dev/fdt/fdtvar.h: revision 1.21 sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1 sys/arch/arm/samsung/exynos_i2c.c: revision 1.13 sys/dev/fdt/fdtvar.h: revision 1.22 sys/arch/evbarm/conf/SUNXI: revision 1.10 sys/dev/fdt/fdtvar.h: revision 1.23 sys/arch/evbarm/conf/SUNXI: revision 1.11 sys/dev/fdt/gpioleds.c: revision 1.1 sys/dev/fdt/fdtvar.h: revision 1.24 sys/arch/evbarm/conf/SUNXI: revision 1.12 sys/arch/evbarm/conf/SUNXI: revision 1.13 sys/arch/arm/cortex/gic.c: revision 1.30 sys/arch/evbarm/conf/SUNXI: revision 1.14 sys/arch/evbarm/conf/SUNXI: revision 1.15 sys/arch/evbarm/conf/SUNXI: revision 1.16 sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1 etc/Makefile: revision 1.430 sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2 etc/Makefile: revision 1.431 sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17 sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3 sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4 sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6 sys/arch/arm/samsung/exynos_platform.c: revision 1.1 sys/dev/ofw/ofw_subr.c: revision 1.29 sys/arch/arm/samsung/exynos_platform.c: revision 1.2 sys/arch/evbarm/conf/mk.vexpress: revision 1.3 sys/arch/arm/samsung/exynos_platform.c: revision 1.3 sys/arch/evbarm/conf/mk.vexpress: revision 1.4 sys/arch/arm/samsung/exynos_platform.c: revision 1.4 sys/arch/arm/arm/psci.h: revision 1.1 sys/arch/arm/samsung/exynos_platform.c: revision 1.5 sys/arch/arm/samsung/exynos_platform.c: revision 1.6 sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10 external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12 sys/dev/fdt/files.fdt: revision 1.17 sys/dev/fdt/files.fdt: revision 1.18 sys/dev/fdt/files.fdt: revision 1.19 sys/arch/arm/samsung/exynos_sscom.c: revision 1.8 sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1 sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1 sys/arch/arm/samsung/exynos_sscom.c: revision 1.9 sys/arch/arm/conf/files.arm: revision 1.133 sys/arch/arm/samsung/mct_var.h: revision 1.5 sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1 sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2 sys/arch/evbarm/conf/std.vexpress: revision 1.6 sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3 sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1 sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4 sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2 sys/arch/arm/sunxi/files.sunxi: revision 1.1 sys/dev/ofw/ofw_subr.c: revision 1.30 sys/arch/arm/sunxi/files.sunxi: revision 1.2 sys/dev/ofw/openfirm.h: revision 1.35 sys/arch/arm/sunxi/files.sunxi: revision 1.3 sys/dev/ofw/openfirm.h: revision 1.36 sys/arch/arm/sunxi/files.sunxi: revision 1.4 sys/arch/arm/sunxi/files.sunxi: revision 1.5 sys/arch/evbarm/exynos/exynos_machdep.c: file removal sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1 sys/arch/arm/samsung/sscom.c: revision 1.9 sys/arch/arm/sunxi/files.sunxi: revision 1.6 sys/dev/fdt/ohci_fdt.c: revision 1.1 sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1 sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2 sys/arch/arm/sunxi/files.sunxi: revision 1.7 sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2 sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3 sys/arch/arm/sunxi/files.sunxi: revision 1.8 sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3 sys/arch/arm/sunxi/files.sunxi: revision 1.9 sys/arch/arm/samsung/exynos_sscom.c: revision 1.10 sys/arch/evbarm/conf/mk.tegra: revision 1.5 sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4 sys/arch/evbarm/conf/mk.tegra: revision 1.6 sys/arch/evbarm/conf/EXYNOS: revision 1.15 sys/arch/evbarm/conf/EXYNOS: revision 1.16 sys/arch/evbarm/conf/EXYNOS: revision 1.17 sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1 sys/arch/evbarm/conf/EXYNOS: revision 1.19 sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2 sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3 sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4 sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5 sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1 sys/arch/evbarm/conf/mk.sunxi: revision 1.1 sys/arch/evbarm/include/bootconfig.h: revision 1.7 sys/arch/evbarm/conf/TEGRA: revision 1.24 sys/arch/arm/arm/psci.c: revision 1.1 sys/dev/led.c: revision 1.1 sys/dev/led.c: revision 1.2 sys/arch/arm/arm/psci_arm.S: revision 1.1 sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1 sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2 sys/dev/fdt/ehci_fdt.c: revision 1.1 sys/dev/fdt/ehci_fdt.c: revision 1.2 sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1 sys/arch/evbarm/conf/EXYNOS: revision 1.21 sys/arch/arm/sunxi/files.sunxi: revision 1.10 sys/arch/arm/sunxi/files.sunxi: revision 1.11 sys/dev/fdt/fdtbus.c: revision 1.14 sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1 sys/arch/arm/samsung/exynos5422_dma.c: file removal usr.bin/config/mkmakefile.c: revision 1.69 sys/conf/files: revision 1.1178 sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1 sys/arch/evbarm/exynos/exynos_start.S: revision 1.4 sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11 sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12 sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1 sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1 sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1 sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2 sys/arch/evbarm/conf/SUNXI: revision 1.1 external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5 sys/arch/evbarm/conf/SUNXI: revision 1.2 sys/arch/arm/fdt/psci_fdt.c: revision 1.1 sys/arch/evbarm/conf/SUNXI: revision 1.3 sys/arch/evbarm/conf/SUNXI: revision 1.4 sys/arch/evbarm/conf/files.exynos: revision 1.3 sys/arch/evbarm/conf/SUNXI: revision 1.5 sys/arch/evbarm/conf/SUNXI: revision 1.6 sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1 sys/dev/fdt/fixedfactorclock.c: revision 1.1 sys/dev/fdt/fdt_subr.c: revision 1.14 sys/arch/evbarm/conf/SUNXI: revision 1.7 sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2 sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1 sys/dev/fdt/fdt_subr.c: revision 1.15 sys/arch/evbarm/conf/SUNXI: revision 1.8 sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3 sys/dev/ic/dwc_mmc_reg.h: revision 1.6 sys/dev/fdt/fdt_subr.c: revision 1.16 sys/arch/evbarm/conf/SUNXI: revision 1.9 usr.bin/config/mkmakefile.c: revision 1.70 sys/dev/fdt/fdt_phy.c: revision 1.1 sys/arch/evbarm/conf/ODROID-XU: file removal sys/arch/arm/fdt/arm_fdt.c: revision 1.4 sys/arch/arm/samsung/exynos_reg.h: revision 1.14 sys/conf/files: revision 1.1180 sys/arch/arm/samsung/exynos_reg.h: revision 1.15 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5 sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6 sys/dev/ic/dwc_mmc_var.h: revision 1.6 sys/arch/arm/samsung/exynos_combiner.c: revision 1.7 sys/arch/evbarm/exynos/platform.h: revision 1.2 sys/arch/arm/fdt/files.fdt: revision 1.12 sys/arch/evbarm/conf/std.exynos: revision 1.2 sys/arch/evbarm/conf/std.exynos: revision 1.3 sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6 sys/arch/arm/sunxi/sunxi_com.c: revision 1.1 sys/dev/led.h: revision 1.1 sys/arch/evbarm/conf/std.exynos: revision 1.5 sys/arch/arm/sunxi/sunxi_com.c: revision 1.2 sys/arch/evbarm/conf/files.evbarm: revision 1.26 usr.bin/config/defs.h: revision 1.99 sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6 sys/arch/arm/samsung/exynos_soc.c: revision 1.32 sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1 sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2 sys/arch/arm/samsung/mct.c: revision 1.11 sys/arch/evbarm/conf/ODROID-U: file removal sys/arch/arm/samsung/mct.c: revision 1.12 sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1 sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2 sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3 sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4 Get the EXYNOS kernel building again with recent FDT changes. Untested. Use arm_fdt_cpu_hatch and add mmu entry for DTB Fix exynos5 devmap, bootstrap, and implement early_putchar. Calculate UART frequency based on bootloader config. Fix KERNEL_BASE_PHYS (how did this ever work?) Avoid divide-by-zero for unconfigured PLLs Correctly initialize i2cbus attach args. Add delay and enable mct timecounter. Fix build w/o VERBOSE_INIT_ARM Remove ODROID-U and ODROID-XU kernel configs as they no longer work. - Replace CONSADDR with SSCOM2CONSOLE in example - Remove gtmr (Exynos5422 uses mct) - cinclude EXYNOS.local instead of TEGRA.local Use fdtbus_intr_establish to hook in block interrupts instead of intr_establish. Simplify MCT; just enable it and then attach an ARMv7 generic timer. Add support for building DTB files during kernel build, from christos. build vexpress-v2p-ca15-tc1.dtb with the kernel build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel Allow multiline makeoptions to work by quoting the newline.. Bump for quoting makeoptions with multiple lines. un-c99 bump required config version for multiline makeoptions feature Set DTS makeoption in kernel config Assign DTB files to a variable so we can make -V DTB put the dtb files with their kernels. no need for debug printing. Don't assume that CPU index = GIC CPU interface number. We can determine the current CPU interface number by reading from the read-only GICD_ITARGETSR0 through GICD_ITARGETSR7 registers. This gets interrupts working on Exynos 5422, where the boot processor has GIC CPU interface #4. use -v to get the expanded variable. Use -v to get the expanded variables. Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach. Fix PLL con0 register locations and add uart clocks Disable exyortc for now, it doesn't work. More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support. Update for new dwc_mmc driver Fix dmesg Add Exynos 5410 clock controller driver. Fix a few typos in clock parent names for mmc clocks. From jmcneill@ Update for new dwc_mmc driver Implement platform reset for exynos5 Attach fdtbus to a /clocks node with no compatible string. Add support for ARM Power State Coordination Interface (PSCI). Support interrupt sharing. Add initial support for Allwinner H3 SoC. ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF, U-Boot on some platforms may use SGIs in this range for the PSCI implementation. Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert to ensure that we don't end up with a conflict. Add H3 MMC support SD/MMC clock fixes Add FDT PHY interface. Add glue for generic ehci/ohci bindings. Rename a variable, NFC. Support parents in different clock domains. Add USB stuff. Doesn't quite work yet. Synopsys DesignWare APB UART needs "options COM_AWIN" for now. Add i2c glue. Add RTC driver. PHY registers start at index 1. Now USB works. Don't allow sharing edge and level triggered interrupts. Add arm_fdt_memory_dump helper for dumping physical addresses from ddb Print clocks with aprint_debug Remove unused defines Add fdtbus_get_string helper Add of_search_compatible, which searches an array of compat_data structures for a matching "compatible" entry matching the supplied OFW node. This allows us to associate data with compatible strings. Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and later family SoCs. This is a port of my FreeBSD driver which has been confirmed to work on Allwinner H3, A83T, and A64 SoCs. Fix dmesg Add basic support for Allwinner A31. Add basic FDT GPIO support. Fix the pinctrl api to match the spec. A pinctrl config can have more than one xref, and an xref may have specifier data associated with it. Enable sunxi pinctrl support Adjust to new pinctrl API Add P2WI/RSB driver, based on awin_p2wi.c. Fix typo in a compat string. Configure pin defaults at attach No need to explicitly set pinctrl config 0 now Fix some register definitions. Disallow sharing between MPSAFE and non-MPSAFE handlers. Add of_match_compat_data. This routine searches an array of compat_data structures for a matching "compatible" entry matching the supplied OFW node. Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based kernels. the extent code cannot use the full range of u_long, so ignore the last page before 4GB too. ok jmcneill@ Copy install ramdisk to releasedir. Provide both a raw ffs and Legacy U-Boot version of it. Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb files for SUNXI and TEGRA kernels on the MSDOS partition. Let the controller provide a default name for pins. This makes pins easier to locate when we have multiple banks and a variable number of pins per bank. Attach gpio(4) to sunxigpio Test for kernel build directory before reading DTB list Add support for Allwinner A83T SoC. Add A83T files Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints. Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac Restore TX_INTERVAL_DEFAULT to 64 Drop the sunxi_emac_rx_batch feature. It was originally designed to reduce the amount of mutex unlock/lock cycles during the RX path on FreeBSD and if_input, but it is not required to drop the lock before calling if_percpuq_enqueue on NetBSD. Write back the data value instead of mask in sunxi_gpio_write Add a helper for exposing LED controls via sysctl. Add GPIO LED driver. add gpioleds Add misc. gates and resets driver, and explicitly enable PIO clocks at attach. Add fdtbus_get_string_index helper. Add driver for fixed-factor clocks. Add ffclock Remove the requirement for ehci to attach after companion devices. "go for it" - skrll@ Remove the hack to find companion devices and just assume 1 companion if ETTF flag is not set. Remove pass numbers for ehci/ohci now that the attach order no longer matters Use unsigned char for ctype functions, suggested by christos Add : to body of populate_sunxi to appease bash. port-evbarm/52388: Fix number of args to a debug printf.
Set DTS makeoption in kernel config
Attach Tegra124 DVFS to /cpus/cpu0 now that another driver is claiming the /cpus node.
Remove reference to CONSPEED, this value comes from fdt data
Rename armv7fdt to armfdt now that bus space + dma tags are filled in by platform code.
Enumerate CPUs, GIC, and generic timer using FDT data instead of relying on hard-coded tables in mainbus.
Sync with HEAD - tag prg-localcount2-base1
add tegraapbdma driver
Sync with HEAD
Allow for specifying (optional) pass number locator for devices at fdt.
Get rid of tegra_cpuinit after scanning fdt and attach the cpufreq support to the /cpus node. Use regulator API instead of poking directly at the I2C controller to set voltages.
add as3722reg
Setup the console serial port using the /chosen/stdout-path property instead of the compile-time CONSADDR setting.
Sync with HEAD
Add fclock(4)
Remove simplebus driver and allow fdtbus to attach directly to itself.
Enable xhci(4)
Disable DIAGNOSTIC - it is already enabled in GENERIC.common
Sync with HEAD
Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
wildcard speaker attachments, now that we can handle many of them.
remove VAUDIOSPEAKER for now, will be done differently.
Add a synthesized pc beeper and keyboard bell for platforms with an audio device.
Sync with HEAD
Enable xhci(4) in TEGRA. It should have something to do now that the pad setup exists.
Sync with HEAD
Add xhci(4) attachment glue and firmware handler for Tegra K1 "XUSB" xHCI controller. Adjustments to tegraxusbpad(4) will be needed to connect the controller to actual USB ports.
Sync with HEAD (as of 26th Dec)
file TEGRA was added on branch nick-nhusb on 2015-12-27 12:09:34 +0000
Switch Tegra over to fdt based clocks and reset controls.
move options FDT to std.tegra
remove some commented out entries for static i2c device instances
wire down ldN to sdmmcN, so disk numbers dont jump around between boots
add gpiokeys driver
Remove JETSONTK1 and NYAN-BIG kernels, add a new unified kernel named TEGRA.