The NetBSD Project

CVS log for src/sys/arch/evbarm/conf/Attic/EXYNOS

[BACK] Up to [cvs.NetBSD.org] / src / sys / arch / evbarm / conf

Request diff between arbitrary revisions


Default branch: MAIN


Revision 1.22.8.1, Mon Jun 10 22:06:04 2019 UTC (4 years, 10 months ago) by christos
Branch: phil-wifi
Changes since 1.22: +1 -1 lines
FILE REMOVED

Sync with HEAD

Revision 1.37, Sun Mar 31 13:10:40 2019 UTC (5 years ago) by jmcneill
Branch: MAIN
CVS Tags: thorpej-futex-base, phil-wifi-20200421, phil-wifi-20200411, phil-wifi-20200406, isaki-audio2-base, isaki-audio2, cjep_sun2x-base, cjep_sun2x, cjep_staticlib_x-base1, cjep_staticlib_x-base, cjep_staticlib_x, bouyer-xenpvh-base2, bouyer-xenpvh-base1, bouyer-xenpvh-base, bouyer-xenpvh, bouyer-sunxi-drm-base, bouyer-sunxi-drm, ad-namecache-base3, ad-namecache-base2, ad-namecache-base1, ad-namecache-base, ad-namecache, HEAD
Changes since 1.36: +1 -1 lines
FILE REMOVED

Remove EXYNOS kernel config.

Revision 1.36 / (download) - annotate - [select for diffs], Wed Feb 6 11:58:30 2019 UTC (5 years, 2 months ago) by rin
Branch: MAIN
Changes since 1.35: +6 -1 lines
Diff to previous 1.35 (colored)

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Revision 1.22.6.4 / (download) - annotate - [select for diffs], Sat Oct 20 06:58:27 2018 UTC (5 years, 5 months ago) by pgoyette
Branch: pgoyette-compat
CVS Tags: pgoyette-compat-merge-20190127
Changes since 1.22.6.3: +5 -1 lines
Diff to previous 1.22.6.3 (colored) to branchpoint 1.22 (colored) next main 1.23 (colored)

Sync with head

Revision 1.35 / (download) - annotate - [select for diffs], Fri Oct 19 06:16:14 2018 UTC (5 years, 5 months ago) by skrll
Branch: MAIN
CVS Tags: pgoyette-compat-20190127, pgoyette-compat-20190118, pgoyette-compat-1226, pgoyette-compat-1126, pgoyette-compat-1020
Changes since 1.34: +3 -3 lines
Diff to previous 1.34 (colored)

Sort dts files

Revision 1.34 / (download) - annotate - [select for diffs], Thu Oct 18 09:01:53 2018 UTC (5 years, 5 months ago) by skrll
Branch: MAIN
Changes since 1.33: +5 -1 lines
Diff to previous 1.33 (colored)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors.  AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested.  Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

Revision 1.22.6.3 / (download) - annotate - [select for diffs], Sun Sep 30 01:45:40 2018 UTC (5 years, 6 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.22.6.2: +3 -2 lines
Diff to previous 1.22.6.2 (colored) to branchpoint 1.22 (colored)

Ssync with HEAD

Revision 1.33 / (download) - annotate - [select for diffs], Tue Sep 11 10:06:53 2018 UTC (5 years, 7 months ago) by jmcneill
Branch: MAIN
CVS Tags: pgoyette-compat-0930
Changes since 1.32: +3 -2 lines
Diff to previous 1.32 (colored)

Add Exynos5 SMP support.

Revision 1.22.6.2 / (download) - annotate - [select for diffs], Thu Sep 6 06:55:30 2018 UTC (5 years, 7 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.22.6.1: +5 -1 lines
Diff to previous 1.22.6.1 (colored) to branchpoint 1.22 (colored)

Sync with HEAD

Resolve a couple of conflicts (result of the uimin/uimax changes)

Revision 1.32 / (download) - annotate - [select for diffs], Sun Aug 19 07:27:33 2018 UTC (5 years, 7 months ago) by skrll
Branch: MAIN
CVS Tags: pgoyette-compat-0906
Changes since 1.31: +5 -1 lines
Diff to previous 1.31 (colored)

Some changes to bring back exynos4 support and make exynos5 support more
modern/generic

- Provide a exynos_platform_early_putchar based on CONSADDR and remove
  EXYNOS_CONSOLE_EARLY
- Provide devmaps for exynos4 and exynos5
- Simplify exynos_bootstrap
- Update exynos_start.S to use exynos_platform_early_putchar - this
  needs a fix in a9_subr.S for arm_cpuinit to save lr in a callee save
  register and not use ip.  Maybe this change is safe now, but too much
  testing required to commit it now.

Revision 1.22.6.1 / (download) - annotate - [select for diffs], Sat Jul 28 04:37:31 2018 UTC (5 years, 8 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.22: +21 -18 lines
Diff to previous 1.22 (colored)

Sync with HEAD

Revision 1.31 / (download) - annotate - [select for diffs], Sat Jul 14 15:09:41 2018 UTC (5 years, 9 months ago) by maxv
Branch: MAIN
CVS Tags: pgoyette-compat-0728
Changes since 1.30: +1 -2 lines
Diff to previous 1.30 (colored)

Remove "options IPKDB", and the other associated options, from the config
files.

ipkdb is being retired. Its code is really old, and hasn't kept pace with
today's expectations: IPv6, SMP, modern NICs. The associated code for x86
was already removed because it was too incorrect to stay.

There are plans to rewrite a similar feature from scratch.

ok kamil christos

Revision 1.30 / (download) - annotate - [select for diffs], Thu Jul 5 13:11:57 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.29: +2 -4 lines
Diff to previous 1.29 (colored)

Replace sscom with a much simpler uart driver. The simpler driver is 1/4th
the size and has the added benefit of not freezing when an arrow key is
pressed.

Revision 1.29 / (download) - annotate - [select for diffs], Wed Jul 4 23:08:29 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.28: +7 -1 lines
Diff to previous 1.28 (colored)

Add expwm, pwmfan

Revision 1.28 / (download) - annotate - [select for diffs], Tue Jul 3 16:09:40 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.27: +10 -7 lines
Diff to previous 1.27 (colored)

Enable Exynos USB support

Revision 1.27 / (download) - annotate - [select for diffs], Mon Jul 2 12:53:51 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.26: +4 -3 lines
Diff to previous 1.26 (colored)

Attach mct early. Do not attach gtmr to mct.

XXX gtmr still needed for setstatclock symbol

Revision 1.26 / (download) - annotate - [select for diffs], Sun Jul 1 23:27:43 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.25: +1 -5 lines
Diff to previous 1.25 (colored)

Remove chipid and sysmmu drivers

Revision 1.25 / (download) - annotate - [select for diffs], Sat Jun 30 16:48:49 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.24: +2 -2 lines
Diff to previous 1.24 (colored)

Attach simplebus on pass 0

Revision 1.24 / (download) - annotate - [select for diffs], Sat Jun 30 16:30:35 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.23: +2 -2 lines
Diff to previous 1.23 (colored)

cpus: use fdt_add_bus

Revision 1.23 / (download) - annotate - [select for diffs], Sat Jun 30 16:22:56 2018 UTC (5 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.22: +2 -2 lines
Diff to previous 1.22 (colored)

Allow nodes to attach child devices using the same sorting rules as used
by the simplebus driver.

Revision 1.22.4.2 / (download) - annotate - [select for diffs], Sun Dec 3 11:36:03 2017 UTC (6 years, 4 months ago) by jdolecek
Branch: tls-maxphys
Changes since 1.22.4.1: +102 -0 lines
Diff to previous 1.22.4.1 (colored) to branchpoint 1.22 (colored) next main 1.23 (colored)

update from HEAD

Revision 1.8.2.5 / (download) - annotate - [select for diffs], Mon Aug 28 17:51:34 2017 UTC (6 years, 7 months ago) by skrll
Branch: nick-nhusb
Changes since 1.8.2.4: +67 -267 lines
Diff to previous 1.8.2.4 (colored) next main 1.9 (colored)

Sync with HEAD

Revision 1.14.4.1 / (download) - annotate - [select for diffs], Tue Jul 18 19:13:09 2017 UTC (6 years, 8 months ago) by snj
Branch: netbsd-8
CVS Tags: netbsd-8-2-RELEASE, netbsd-8-1-RELEASE, netbsd-8-1-RC1, netbsd-8-0-RELEASE, netbsd-8-0-RC2, netbsd-8-0-RC1, matt-nb8-mediatek-base, matt-nb8-mediatek
Changes since 1.14: +58 -265 lines
Diff to previous 1.14 (colored) next main 1.15 (colored)

Pull up following revision(s) (requested by jmcneill in ticket #114):
	sys/arch/arm/samsung/exynos_intr.h: revision 1.3
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
	distrib/utils/embedded/mkimage: revision 1.66
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
	sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
	sys/dev/gpio/gpio.c: revision 1.59
	sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
	sys/conf/Makefile.kern.inc: revision 1.257
	sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
	sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
	sys/conf/Makefile.kern.inc: revision 1.258
	sys/arch/arm/fdt/psci_fdt.h: revision 1.1
	sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
	sys/arch/evbarm/conf/files.sunxi: revision 1.1
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
	sys/arch/arm/samsung/files.exynos: revision 1.22
	distrib/utils/embedded/conf/armv7.conf: revision 1.13
	sys/arch/arm/samsung/files.exynos: revision 1.23
	sys/arch/evbarm/conf/std.tegra: revision 1.15
	distrib/utils/embedded/conf/armv7.conf: revision 1.14
	sys/arch/arm/samsung/files.exynos: revision 1.24
	distrib/utils/embedded/conf/armv7.conf: revision 1.15
	sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
	sys/arch/arm/samsung/exynos_fdt.c: file removal
	sys/dev/fdt/fdt_pinctrl.c: revision 1.4
	sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
	sys/dev/usb/ehci.c: revision 1.255
	sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
	sys/dev/ic/dwc_mmc.c: revision 1.11
	sys/arch/arm/cortex/gic.c: revision 1.24
	distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
	etc/etc.evbarm/Makefile.inc: revision 1.87
	etc/etc.evbarm/Makefile.inc: revision 1.88
	sys/arch/arm/fdt/gic_fdt.c: revision 1.5
	etc/Makefile: revision 1.429
	sys/arch/arm/fdt/gic_fdt.c: revision 1.6
	sys/arch/arm/fdt/gic_fdt.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
	sys/arch/evbarm/conf/std.sunxi: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
	sys/arch/evbarm/conf/std.sunxi: revision 1.2
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
	sys/arch/evbarm/conf/std.sunxi: revision 1.3
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
	sys/dev/gpio/gpiovar.h: revision 1.17
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
	sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
	sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
	sys/dev/fdt/fdtvar.h: revision 1.21
	sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
	sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
	sys/dev/fdt/fdtvar.h: revision 1.22
	sys/arch/evbarm/conf/SUNXI: revision 1.10
	sys/dev/fdt/fdtvar.h: revision 1.23
	sys/arch/evbarm/conf/SUNXI: revision 1.11
	sys/dev/fdt/gpioleds.c: revision 1.1
	sys/dev/fdt/fdtvar.h: revision 1.24
	sys/arch/evbarm/conf/SUNXI: revision 1.12
	sys/arch/evbarm/conf/SUNXI: revision 1.13
	sys/arch/arm/cortex/gic.c: revision 1.30
	sys/arch/evbarm/conf/SUNXI: revision 1.14
	sys/arch/evbarm/conf/SUNXI: revision 1.15
	sys/arch/evbarm/conf/SUNXI: revision 1.16
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
	etc/Makefile: revision 1.430
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
	etc/Makefile: revision 1.431
	sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
	sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
	sys/arch/arm/samsung/exynos_platform.c: revision 1.1
	sys/dev/ofw/ofw_subr.c: revision 1.29
	sys/arch/arm/samsung/exynos_platform.c: revision 1.2
	sys/arch/evbarm/conf/mk.vexpress: revision 1.3
	sys/arch/arm/samsung/exynos_platform.c: revision 1.3
	sys/arch/evbarm/conf/mk.vexpress: revision 1.4
	sys/arch/arm/samsung/exynos_platform.c: revision 1.4
	sys/arch/arm/arm/psci.h: revision 1.1
	sys/arch/arm/samsung/exynos_platform.c: revision 1.5
	sys/arch/arm/samsung/exynos_platform.c: revision 1.6
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
	external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
	sys/dev/fdt/files.fdt: revision 1.17
	sys/dev/fdt/files.fdt: revision 1.18
	sys/dev/fdt/files.fdt: revision 1.19
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
	sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
	sys/arch/arm/conf/files.arm: revision 1.133
	sys/arch/arm/samsung/mct_var.h: revision 1.5
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
	sys/arch/evbarm/conf/std.vexpress: revision 1.6
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
	sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
	sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
	sys/arch/arm/sunxi/files.sunxi: revision 1.1
	sys/dev/ofw/ofw_subr.c: revision 1.30
	sys/arch/arm/sunxi/files.sunxi: revision 1.2
	sys/dev/ofw/openfirm.h: revision 1.35
	sys/arch/arm/sunxi/files.sunxi: revision 1.3
	sys/dev/ofw/openfirm.h: revision 1.36
	sys/arch/arm/sunxi/files.sunxi: revision 1.4
	sys/arch/arm/sunxi/files.sunxi: revision 1.5
	sys/arch/evbarm/exynos/exynos_machdep.c: file removal
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
	sys/arch/arm/samsung/sscom.c: revision 1.9
	sys/arch/arm/sunxi/files.sunxi: revision 1.6
	sys/dev/fdt/ohci_fdt.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
	sys/arch/arm/sunxi/files.sunxi: revision 1.7
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
	sys/arch/arm/sunxi/files.sunxi: revision 1.8
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
	sys/arch/arm/sunxi/files.sunxi: revision 1.9
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
	sys/arch/evbarm/conf/mk.tegra: revision 1.5
	sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
	sys/arch/evbarm/conf/mk.tegra: revision 1.6
	sys/arch/evbarm/conf/EXYNOS: revision 1.15
	sys/arch/evbarm/conf/EXYNOS: revision 1.16
	sys/arch/evbarm/conf/EXYNOS: revision 1.17
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
	sys/arch/evbarm/conf/EXYNOS: revision 1.19
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
	sys/arch/evbarm/conf/mk.sunxi: revision 1.1
	sys/arch/evbarm/include/bootconfig.h: revision 1.7
	sys/arch/evbarm/conf/TEGRA: revision 1.24
	sys/arch/arm/arm/psci.c: revision 1.1
	sys/dev/led.c: revision 1.1
	sys/dev/led.c: revision 1.2
	sys/arch/arm/arm/psci_arm.S: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
	sys/dev/fdt/ehci_fdt.c: revision 1.1
	sys/dev/fdt/ehci_fdt.c: revision 1.2
	sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
	sys/arch/evbarm/conf/EXYNOS: revision 1.21
	sys/arch/arm/sunxi/files.sunxi: revision 1.10
	sys/arch/arm/sunxi/files.sunxi: revision 1.11
	sys/dev/fdt/fdtbus.c: revision 1.14
	sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
	sys/arch/arm/samsung/exynos5422_dma.c: file removal
	usr.bin/config/mkmakefile.c: revision 1.69
	sys/conf/files: revision 1.1178
	sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
	sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
	sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
	sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
	sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
	sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
	sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
	sys/arch/evbarm/conf/SUNXI: revision 1.1
	external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
	sys/arch/evbarm/conf/SUNXI: revision 1.2
	sys/arch/arm/fdt/psci_fdt.c: revision 1.1
	sys/arch/evbarm/conf/SUNXI: revision 1.3
	sys/arch/evbarm/conf/SUNXI: revision 1.4
	sys/arch/evbarm/conf/files.exynos: revision 1.3
	sys/arch/evbarm/conf/SUNXI: revision 1.5
	sys/arch/evbarm/conf/SUNXI: revision 1.6
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
	sys/dev/fdt/fixedfactorclock.c: revision 1.1
	sys/dev/fdt/fdt_subr.c: revision 1.14
	sys/arch/evbarm/conf/SUNXI: revision 1.7
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
	sys/dev/fdt/fdt_subr.c: revision 1.15
	sys/arch/evbarm/conf/SUNXI: revision 1.8
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
	sys/dev/ic/dwc_mmc_reg.h: revision 1.6
	sys/dev/fdt/fdt_subr.c: revision 1.16
	sys/arch/evbarm/conf/SUNXI: revision 1.9
	usr.bin/config/mkmakefile.c: revision 1.70
	sys/dev/fdt/fdt_phy.c: revision 1.1
	sys/arch/evbarm/conf/ODROID-XU: file removal
	sys/arch/arm/fdt/arm_fdt.c: revision 1.4
	sys/arch/arm/samsung/exynos_reg.h: revision 1.14
	sys/conf/files: revision 1.1180
	sys/arch/arm/samsung/exynos_reg.h: revision 1.15
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
	sys/dev/ic/dwc_mmc_var.h: revision 1.6
	sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
	sys/arch/evbarm/exynos/platform.h: revision 1.2
	sys/arch/arm/fdt/files.fdt: revision 1.12
	sys/arch/evbarm/conf/std.exynos: revision 1.2
	sys/arch/evbarm/conf/std.exynos: revision 1.3
	sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
	sys/dev/led.h: revision 1.1
	sys/arch/evbarm/conf/std.exynos: revision 1.5
	sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
	sys/arch/evbarm/conf/files.evbarm: revision 1.26
	usr.bin/config/defs.h: revision 1.99
	sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
	sys/arch/arm/samsung/exynos_soc.c: revision 1.32
	sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
	sys/arch/arm/samsung/mct.c: revision 1.11
	sys/arch/evbarm/conf/ODROID-U: file removal
	sys/arch/arm/samsung/mct.c: revision 1.12
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too.  ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.

Revision 1.22.4.1, Tue Jun 20 20:20:02 2017 UTC (6 years, 9 months ago) by jdolecek
Branch: tls-maxphys
Changes since 1.22: +0 -102 lines
FILE REMOVED

file EXYNOS was added on branch tls-maxphys on 2017-12-03 11:36:03 +0000

Revision 1.22 / (download) - annotate - [select for diffs], Tue Jun 20 20:20:02 2017 UTC (6 years, 9 months ago) by skrll
Branch: MAIN
CVS Tags: tls-maxphys-base-20171202, phil-wifi-base, pgoyette-compat-base, pgoyette-compat-0625, pgoyette-compat-0521, pgoyette-compat-0502, pgoyette-compat-0422, pgoyette-compat-0415, pgoyette-compat-0407, pgoyette-compat-0330, pgoyette-compat-0322, pgoyette-compat-0315, perseant-stdc-iso10646-base, perseant-stdc-iso10646, nick-nhusb-base-20170825
Branch point for: tls-maxphys, phil-wifi, pgoyette-compat
Changes since 1.21: +2 -1 lines
Diff to previous 1.21 (colored)

Add exynos5410-smdk5410.dts to DTS list

Revision 1.21 / (download) - annotate - [select for diffs], Tue Jun 20 13:21:45 2017 UTC (6 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.20: +2 -1 lines
Diff to previous 1.20 (colored)

Add Exynos 5410 clock controller driver.

Revision 1.20 / (download) - annotate - [select for diffs], Tue Jun 20 10:37:01 2017 UTC (6 years, 9 months ago) by skrll
Branch: MAIN
Changes since 1.19: +2 -1 lines
Diff to previous 1.19 (colored)

Add exynos5410-odroidxu.dts to DTS list

Revision 1.19 / (download) - annotate - [select for diffs], Mon Jun 19 22:01:18 2017 UTC (6 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.18: +2 -2 lines
Diff to previous 1.18 (colored)

Disable exyortc for now, it doesn't work.

Revision 1.18 / (download) - annotate - [select for diffs], Sun Jun 18 15:57:16 2017 UTC (6 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.17: +7 -1 lines
Diff to previous 1.17 (colored)

Build exynos5422 .dtb files with this kernel.

Revision 1.17 / (download) - annotate - [select for diffs], Sun Jun 11 16:21:41 2017 UTC (6 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.16: +2 -1 lines
Diff to previous 1.16 (colored)

Simplify MCT; just enable it and then attach an ARMv7 generic timer.

Revision 1.16 / (download) - annotate - [select for diffs], Sun Jun 11 11:04:20 2017 UTC (6 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.15: +4 -6 lines
Diff to previous 1.15 (colored)

- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local

Revision 1.15 / (download) - annotate - [select for diffs], Sat Jun 10 15:13:19 2017 UTC (6 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.14: +58 -265 lines
Diff to previous 1.14 (colored)

Get the EXYNOS kernel building again with recent FDT changes. Untested.

Revision 1.10.2.2 / (download) - annotate - [select for diffs], Wed Apr 26 02:53:01 2017 UTC (6 years, 11 months ago) by pgoyette
Branch: pgoyette-localcount
Changes since 1.10.2.1: +2 -4 lines
Diff to previous 1.10.2.1 (colored) to branchpoint 1.10 (colored) next main 1.11 (colored)

Sync with HEAD

Revision 1.11.2.1 / (download) - annotate - [select for diffs], Fri Apr 21 16:53:25 2017 UTC (6 years, 11 months ago) by bouyer
Branch: bouyer-socketcan
Changes since 1.11: +3 -4 lines
Diff to previous 1.11 (colored) next main 1.12 (colored)

Sync with HEAD

Revision 1.14 / (download) - annotate - [select for diffs], Sun Apr 16 15:49:26 2017 UTC (6 years, 11 months ago) by jmcneill
Branch: MAIN
CVS Tags: prg-localcount2-base3, prg-localcount2-base2, prg-localcount2-base1, prg-localcount2-base, prg-localcount2, pgoyette-localcount-20170426, netbsd-8-base, bouyer-socketcan-base1
Branch point for: netbsd-8
Changes since 1.13: +2 -2 lines
Diff to previous 1.13 (colored)

typo fix

Revision 1.13 / (download) - annotate - [select for diffs], Fri Apr 14 22:55:06 2017 UTC (7 years ago) by jmcneill
Branch: MAIN
Changes since 1.12: +2 -4 lines
Diff to previous 1.12 (colored)

Remove simplebus driver and allow fdtbus to attach directly to itself.

Revision 1.10.2.1 / (download) - annotate - [select for diffs], Mon Mar 20 06:57:13 2017 UTC (7 years ago) by pgoyette
Branch: pgoyette-localcount
Changes since 1.10: +2 -1 lines
Diff to previous 1.10 (colored)

Sync with HEAD

Revision 1.12 / (download) - annotate - [select for diffs], Sun Feb 19 07:47:00 2017 UTC (7 years, 1 month ago) by rin
Branch: MAIN
CVS Tags: pgoyette-localcount-20170320, jdolecek-ncq-base, jdolecek-ncq
Changes since 1.11: +2 -1 lines
Diff to previous 1.11 (colored)

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

Revision 1.8.2.4 / (download) - annotate - [select for diffs], Wed Oct 5 20:55:26 2016 UTC (7 years, 6 months ago) by skrll
Branch: nick-nhusb
Changes since 1.8.2.3: +2 -3 lines
Diff to previous 1.8.2.3 (colored)

Sync with HEAD

Revision 1.11 / (download) - annotate - [select for diffs], Fri Aug 19 18:08:50 2016 UTC (7 years, 7 months ago) by maxv
Branch: MAIN
CVS Tags: pgoyette-localcount-20170107, pgoyette-localcount-20161104, nick-nhusb-base-20170204, nick-nhusb-base-20161204, nick-nhusb-base-20161004, localcount-20160914, bouyer-socketcan-base
Branch point for: bouyer-socketcan
Changes since 1.10: +1 -2 lines
Diff to previous 1.10 (colored)

Remove the last references to KMEMSTATS.

Revision 1.8.2.3 / (download) - annotate - [select for diffs], Sat Mar 19 11:29:58 2016 UTC (8 years ago) by skrll
Branch: nick-nhusb
Changes since 1.8.2.2: +30 -22 lines
Diff to previous 1.8.2.2 (colored)

Sync with HEAD

Revision 1.10 / (download) - annotate - [select for diffs], Tue Jan 5 21:53:48 2016 UTC (8 years, 3 months ago) by marty
Branch: MAIN
CVS Tags: pgoyette-localcount-base, pgoyette-localcount-20160806, pgoyette-localcount-20160726, nick-nhusb-base-20160907, nick-nhusb-base-20160529, nick-nhusb-base-20160422, nick-nhusb-base-20160319
Branch point for: pgoyette-localcount
Changes since 1.9: +4 -1 lines
Diff to previous 1.9 (colored)

FDT: Interrupts -- add support for interrupt maps

The mct on exynos uses an interrupt map so we add support now.  Devices
represent their interrupts either through a combination of interrupt-parent
and interrupts properties, where the 'interrupts' property is an array of
one or more interrupt specifiers; or through a combination of an
interrupt-parent that points to an interrupt-map, where the interrupt-map
contains 2 or more entries consisting of an index, a pointer to an
interrupt-controller, and a specifier for that controller.

This code adds the ability to walk the interrupt-map and return a specifier.
Unfortunately, the addition requires changing the interface to the
interrupt-controllers' _establish and _intstr functions, so this check in
contains a rototill of the three existing fdt interrupt controllers to use
the new interface.

Revision 1.9 / (download) - annotate - [select for diffs], Sun Dec 27 12:26:42 2015 UTC (8 years, 3 months ago) by jmcneill
Branch: MAIN
Changes since 1.8: +7 -15 lines
Diff to previous 1.8 (colored)

wildcard attachments to fdtbus

Revision 1.8.2.2 / (download) - annotate - [select for diffs], Sun Dec 27 12:09:34 2015 UTC (8 years, 3 months ago) by skrll
Branch: nick-nhusb
Changes since 1.8.2.1: +295 -0 lines
Diff to previous 1.8.2.1 (colored)

Sync with HEAD (as of 26th Dec)

Revision 1.8.2.1, Sun Dec 27 02:54:13 2015 UTC (8 years, 3 months ago) by skrll
Branch: nick-nhusb
Changes since 1.8: +0 -308 lines
FILE REMOVED

file EXYNOS was added on branch nick-nhusb on 2015-12-27 12:09:34 +0000

Revision 1.8 / (download) - annotate - [select for diffs], Sun Dec 27 02:54:13 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
Branch point for: nick-nhusb
Changes since 1.7: +11 -6 lines
Diff to previous 1.7 (colored)

XU4 USB snapshot: Reorganize source files

This is just a skeleton,  not a set of drivers, but the pieces are now
more or less in the right places.

Revision 1.7 / (download) - annotate - [select for diffs], Sat Dec 26 23:14:08 2015 UTC (8 years, 3 months ago) by jmcneill
Branch: MAIN
Changes since 1.6: +10 -2 lines
Diff to previous 1.6 (colored)

add dwcmmc

Revision 1.6 / (download) - annotate - [select for diffs], Mon Dec 21 04:58:50 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
CVS Tags: nick-nhusb-base-20151226
Changes since 1.5: +1 -4 lines
Diff to previous 1.5 (colored)

XU4 FDT final checkpoint

step N of N: get rid of baggage by removing whole files.  What's left is in
approximately the same shape as when the FDT update started, that is mostly
broken. What's missing is most of the 76 devices recognized in the dtd. In
other words, This is barely the start of a port.

Next up, gpio then i2c, followed either by straightening out usb or getting
the sdhc driver to work -- both probably require getting the interrupt
combiner to work first. A large chunk of work is left to do on the clocks.
I barely got them attaching to fdt and didn't do anything to take advantage
of the information in the dtd.

None of the other existing drivers, such as they are, properly request gpios,
i2c or clocks, and, of course power domains are off the table.

Revision 1.5 / (download) - annotate - [select for diffs], Mon Dec 21 03:34:34 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
Changes since 1.4: +3 -3 lines
Diff to previous 1.4 (colored)

XU4 FDT Last drivers converted

There is a minimum conversion on the clock driver.

The USB driver needs reordering and is broken, but it was broken before.

Next up: tactical nuclear weapons

Revision 1.4 / (download) - annotate - [select for diffs], Mon Dec 21 00:52:51 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
Changes since 1.3: +16 -3 lines
Diff to previous 1.3 (colored)

XU4 FDT checkpoint

It is rather amazing that XU4 gets as far as it does, given how much of this
code simply doesn't work.  Focusing now on getting everything converted to
FDT. Next up USB and clocks.  After that nuke everything that's not needed
and start the port in earnest.

Revision 1.3 / (download) - annotate - [select for diffs], Sat Dec 19 21:42:31 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
Changes since 1.2: +10 -3 lines
Diff to previous 1.2 (colored)

XU4 GPIO FDT broken snapshot

This is broken. exynos_gpio_bank_config and the call to it are wrong, and
the acquire function doesn't work.

But I'm in over my head and I need to discuss this:

There is a problem with the dtd: it doesn't have addresses for the individual
gpios.  Do I add the addresses to it, or go back to the old version where I
have them hard coded in the driver.

There is a problem with creating the gpio device entries:  I suspect I really
need to treat the pinctrl devices as busses and create the gpios as attached
to those busses, but I'm not familiar with how to do that in NetBSD. At the
minimum, a pointer to a similar situation would give me code to follow.
This is different than the usual bus attachment in that the gpios aren't
devices in the dtd (they don't have "compatible" properties) so they don't
get an attach routine called.  An alternative to generating the bus
attachments might be to add "compatible" properties to the GPIO entries
in the dtd. so that they do get attached in the normal way.

If I'm going to modify the DTD, then it should be checked in, so a decision
on where to check them in would be nice, even if it does mean spreading them
all over because of license issues.  (This DTD is GPL v2)

Revision 1.2 / (download) - annotate - [select for diffs], Thu Dec 17 22:40:49 2015 UTC (8 years, 3 months ago) by marty
Branch: MAIN
Changes since 1.1: +3 -3 lines
Diff to previous 1.1 (colored)

XU4 FDT sscon

This is a mess and I don't understand why part of it works, but it passes
the basic test.

There has to be some better way to get the info that I'm grabbing from the
exynos_uarts[] array.

I'm not sure how to deal with VA != PA when the DTB contains physical rather
than virtual addresses. This is going to be an issue for all of the drivers.

Revision 1.1 / (download) - annotate - [select for diffs], Tue Dec 15 04:38:30 2015 UTC (8 years, 4 months ago) by marty
Branch: MAIN

EXYNOS - change ODROID-XU4 to EXYNOS

EXYNOS will be a generic fdt kernel, so signify that with the name change,
as requested by Nick.

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.




CVSweb <webmaster@jp.NetBSD.org>