/* $NetBSD: fd.c,v 1.2 1995/04/10 08:56:18 mycroft Exp $ */
/*
* Copyright (c) 1995 Leo Weppelman.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Leo Weppelman.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This file contains a driver for the Floppy Disk Controller (FDC)
* on the Atari TT. It uses the WD 1772 chip, modified for steprates.
*
* The ST floppy disk controller shares the access to the DMA circuitry
* with other devices. For this reason the floppy disk controller makes
* use of some special DMA accessing code.
*
* Interrupts from the FDC are in fact DMA interrupts which get their
* first level handling in 'dma.c' . If the floppy driver is currently
* using DMA the interrupt is signalled to 'fdcint'.
*
* TODO:
* - Test it with 2 drives (I don't have them)
* - Test it with an HD-drive (Don't have that either)
* - Finish ioctl's
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/fcntl.h>
#include <sys/conf.h>
#include <sys/disklabel.h>
#include <sys/disk.h>
#include <sys/dkbad.h>
#include <atari/atari/device.h>
#include <machine/disklabel.h>
#include <machine/iomap.h>
#include <machine/mfp.h>
#include <machine/dma.h>
#include <machine/video.h>
#include <atari/dev/fdreg.h>
/*
* Be verbose for debugging
*/
/*#define FLP_DEBUG 1 */
#define FDC_DELAY 64 /* for dma[rw]dat() */
#define FDC_MAX_DMA_AD 0x1000000 /* No DMA possible beyond */
/* Parameters for the disk drive. */
#define SECTOR_SIZE 512 /* physical sector size in bytes */
#define NR_DRIVES 2 /* maximum number of drives */
#define NR_TYPES 3 /* number of diskette/drive combinations*/
#define MAX_ERRORS 10 /* how often to try rd/wt before quitting*/
#define STEP_DELAY 6000 /* 6ms (6000us) delay after stepping */
#define INV_TRK 32000 /* Should fit in unsigned short */
#define INV_PART NR_TYPES
/*
* Driver states
*/
#define FLP_IDLE 0x00 /* floppy is idle */
#define FLP_MON 0x01 /* idle with motor on */
#define FLP_STAT 0x02 /* determine floppy status */
#define FLP_XFER 0x04 /* read/write data from floppy */
/*
* Timer delay's
*/
#define FLP_MONDELAY (3 * hz) /* motor-on delay */
#define FLP_XFERDELAY (2 * hz) /* timeout on transfer */
#define b_block b_resid /* FIXME: this is not the place */
/*
* Global data for all physical floppy devices
*/
static short selected = 0; /* drive/head currently selected*/
static short motoron = 0; /* motor is spinning */
static short nopens = 0; /* Number of opens executed */
static short fd_state = FLP_IDLE;/* Current driver state */
static short fd_in_dma= 0; /* 1: dmagrab() called */
static short fd_cmd = 0; /* command being executed */
static char *fd_error= NULL; /* error from fd_xfer_ok() */
/*
* Private per device data
*/
struct fd_softc {
struct dkdevice dkdev;
struct buf bufq; /* queue of buf's */
int unit; /* unit for atari controlling hw*/
int nheads; /* number of heads in use */
int nsectors; /* number of sectors/track */
int nblocks; /* number of blocks on disk */
int curtrk; /* track head positioned on */
short flags; /* misc flags */
short part; /* Current open partition */
int sector; /* logical sector for I/O */
caddr_t io_data; /* KVA for data transfer */
int io_bytes; /* bytes left for I/O */
int io_dir; /* B_READ/B_WRITE */
int errcnt; /* current error count */
u_char *bounceb; /* Bounce buffer */
};
/*
* Flags in fd_softc:
*/
#define FLPF_NOTRESP 0x01 /* Unit not responding */
#define FLPF_ISOPEN 0x02 /* Unit is open */
#define FLPF_ISHD 0x04 /* Use High Density */
#define FLPF_HAVELAB 0x08 /* We have a valid label */
#define FLPF_BOUNCE 0x10 /* Now using the bounce buffer */
struct fd_types {
int nheads; /* Heads in use */
int nsectors; /* sectors per track */
int nblocks; /* number of blocks */
} fdtypes[NR_TYPES] = {
{ 1, 9, 720 }, /* 360 Kb */
{ 2, 9, 1440 }, /* 720 Kb */
{ 1, 18, 2880 }, /* 1.44 Mb */
};
typedef void (*FPV)();
/*
* Private drive functions....
*/
static void fdstart __P((struct fd_softc *));
static void fddone __P((struct fd_softc *));
static void fd_xfer __P((struct fd_softc *));
static int fdcint __P((struct fd_softc *));
static int fd_xfer_ok __P((struct fd_softc *));
static void fdmotoroff __P((struct fd_softc *));
static int fdminphys __P((struct buf *));
static void fdtestdrv __P((struct fd_softc *));
static int fdgetdisklabel __P((struct fd_softc *, dev_t));
/*
* Autoconfig stuff....
*/
static int fdcmatch __P((struct device *, struct cfdata *, void *));
static int fdcprint __P((void *, char *));
static void fdcattach __P((struct device *, struct device *, void *));
struct cfdriver fdccd = {
NULL, "fdc", (cfmatch_t)fdcmatch, fdcattach, DV_DULL,
sizeof(struct device), NULL, 0 };
static int
fdcmatch(pdp, cfp, auxp)
struct device *pdp;
struct cfdata *cfp;
void *auxp;
{
if(strcmp("fdc", auxp) || cfp->cf_unit != 0)
return(0);
return(1);
}
static void
fdcattach(pdp, dp, auxp)
struct device *pdp, *dp;
void *auxp;
{
struct fd_softc fdsoftc;
int i, nfound = 0;
printf("\n");
for(i = 0; i < NR_DRIVES; i++) {
/*
* Test if unit is present
*/
fdsoftc.unit = i;
fdsoftc.flags = 0;
dmagrab(fdcint, fdtestdrv, &fdsoftc);
dmafree();
if(!(fdsoftc.flags & FLPF_NOTRESP)) {
nfound++;
config_found(dp, (void*)i, fdcprint);
}
}
if(nfound) {
/*
* enable disk related interrupts
*/
MFP->mf_ierb |= IB_DINT;
MFP->mf_iprb &= ~IB_DINT;
MFP->mf_imrb |= IB_DINT;
}
}
static int
fdcprint(auxp, pnp)
void *auxp;
char *pnp;
{
return(UNCONF);
}
static int fdmatch __P((struct device *, struct cfdata *, void *));
static void fdattach __P((struct device *, struct device *, void *));
void fdstrategy __P((struct buf *));
struct dkdriver fddkdriver = { fdstrategy };
struct cfdriver fdcd = {
NULL, "fd", (cfmatch_t)fdmatch, fdattach, DV_DISK,
sizeof(struct fd_softc), NULL, 0 };
static int
fdmatch(pdp, cfp, auxp)
struct device *pdp;
struct cfdata *cfp;
void *auxp;
{
int unit = (int)auxp;
return(1);
}
static void
fdattach(pdp, dp, auxp)
struct device *pdp, *dp;
void *auxp;
{
struct fd_softc *sc;
sc = (struct fd_softc *)dp;
printf("\n");
sc->dkdev.dk_driver = &fddkdriver;
}
fdioctl(dev, cmd, addr, flag, p)
dev_t dev;
u_long cmd;
int flag;
caddr_t addr;
struct proc *p;
{
struct fd_softc *sc;
void *data;
sc = getsoftc(fdcd, DISKUNIT(dev));
if((sc->flags & FLPF_HAVELAB) == 0)
return(EBADF);
switch(cmd) {
case DIOCSBAD:
return(EINVAL);
case DIOCGDINFO:
*(struct disklabel *)addr = sc->dkdev.dk_label;
return(0);
case DIOCGPART:
((struct partinfo *)addr)->disklab =
&sc->dkdev.dk_label;
((struct partinfo *)addr)->part =
&sc->dkdev.dk_label.d_partitions[DISKPART(dev)];
return(0);
#ifdef notyet /* XXX LWP */
case DIOCSRETRIES:
case DIOCSSTEP:
case DIOCSDINFO:
case DIOCWDINFO:
case DIOCWLABEL:
#endif /* notyet */
default:
return(ENOTTY);
}
}
/*
* Open the device. If this is the first open on both the floppy devices,
* intialize the controller.
* Note that partition info on the floppy device is used to distinguise
* between 780Kb and 360Kb floppy's.
* partition 0: 360Kb
* partition 1: 780Kb
*/
Fdopen(dev, flags, devtype, proc)
dev_t dev;
int flags, devtype;
struct proc *proc;
{
struct fd_softc *sc;
int sps;
#ifdef FLP_DEBUG
printf("Fdopen dev=0x%x\n", dev);
#endif
if(DISKPART(dev) >= NR_TYPES)
return(ENXIO);
if((sc = getsoftc(fdcd, DISKUNIT(dev))) == NULL)
return(ENXIO);
/*
* If no floppy currently open, reset the controller and select
* floppy type.
*/
if(!nopens) {
#ifdef FLP_DEBUG
printf("Fdopen device not yet open\n");
#endif
nopens++;
dmawdat(FDC_CS, IRUPT, FDC_DELAY);
}
if(!(sc->flags & FLPF_ISOPEN)) {
/*
* Initialise some driver values.
*/
int part = DISKPART(dev);
void *addr;
sc->bufq.b_actf = NULL;
sc->unit = DISKUNIT(dev);
sc->part = part;
sc->nheads = fdtypes[part].nheads;
sc->nsectors = fdtypes[part].nsectors;
sc->nblocks = fdtypes[part].nblocks;
sc->curtrk = INV_TRK;
sc->sector = 0;
sc->errcnt = 0;
sc->bounceb = (u_char*)alloc_stmem(SECTOR_SIZE, &addr);
if(sc->bounceb == NULL)
return(ENOMEM); /* XXX */
if(sc->nsectors > 9) /* XXX */
sc->flags |= FLPF_ISHD;
sc->flags = FLPF_ISOPEN;
}
else {
/*
* Multiply opens are granted when accessing the same type of
* floppy (eq. the same partition).
*/
if(sc->part != DISKPART(dev))
return(ENXIO); /* XXX temporarely out of business */
}
fdgetdisklabel(sc, dev);
#ifdef FLP_DEBUG
printf("Fdopen open succeeded on type %d\n", sc->part);
#endif
}
fdclose(dev, flags, devtype, proc)
dev_t dev;
int flags, devtype;
struct proc *proc;
{
struct fd_softc *sc;
sc = getsoftc(fdcd, DISKUNIT(dev));
free_stmem(sc->bounceb);
sc->flags = 0;
nopens--;
#ifdef FLP_DEBUG
printf("Closed floppy device -- nopens: %d\n", nopens);
#endif
}
void
fdstrategy(bp)
struct buf *bp;
{
struct fd_softc *sc;
int sps, nblocks;
sc = getsoftc(fdcd, DISKUNIT(bp->b_dev));
#ifdef FLP_DEBUG
printf("fdstrategy: 0x%x\n", bp);
#endif
/*
* check for valid partition and bounds
*/
nblocks = (bp->b_bcount + SECTOR_SIZE - 1) / SECTOR_SIZE;
if((bp->b_blkno < 0) || ((bp->b_blkno + nblocks) >= sc->nblocks)) {
if((bp->b_blkno == sc->nblocks) && (bp->b_flags & B_READ)) {
/*
* Read 1 block beyond, return EOF
*/
bp->b_resid = bp->b_bcount;
goto done;
}
/*
* Try to limit the size of the transaction, adjust count
* if we succeed.
*/
nblocks = sc->nblocks - bp->b_blkno;
if((nblocks <= 0) || (bp->b_blkno < 0)) {
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto done;
}
bp->b_bcount = nblocks * SECTOR_SIZE;
}
if(bp->b_bcount == 0)
goto done;
/*
* Set order info for disksort
*/
bp->b_block = bp->b_blkno / (sc->nsectors * sc->nheads);
/*
* queue the buf and kick the low level code
*/
sps = splbio();
disksort(&sc->bufq, bp);
if(!fd_in_dma) {
if(fd_state & FLP_MON)
untimeout((FPV)fdmotoroff, (void*)sc);
fd_state = FLP_IDLE;
fd_in_dma = 1; dmagrab(fdcint, fdstart, sc);
}
splx(sps);
return;
done:
bp->b_resid = bp->b_bcount;
biodone(bp);
}
/*
* no dumps to floppy disks thank you.
*/
int
fdsize(dev)
dev_t dev;
{
return(-1);
}
int
fdread(dev, uio)
dev_t dev;
struct uio *uio;
{
return(physio(cdevsw[major(dev)].d_strategy, (struct buf *)NULL,
dev, B_READ, fdminphys, uio));
}
int
fdwrite(dev, uio)
dev_t dev;
struct uio *uio;
{
return(physio(cdevsw[major(dev)].d_strategy, (struct buf *)NULL,
dev, B_WRITE, fdminphys, uio));
}
/*
* Called through the dma-dispatcher. So we know we are the only ones
* messing with the floppy-controler.
* Initialize some fields in the fdsoftc for the state-machine and get
* it going.
*/
static void
fdstart(sc)
struct fd_softc *sc;
{
struct buf *bp;
bp = sc->bufq.b_actf;
sc->sector = bp->b_blkno; /* Start sector for I/O */
sc->io_data = bp->b_data; /* KVA base for I/O */
sc->io_bytes = bp->b_bcount; /* Transfer size in bytes */
sc->io_dir = bp->b_flags & B_READ;/* Direction of transfer */
sc->errcnt = 0; /* No errors yet */
fd_state = FLP_XFER; /* Yes, we're going to transfer */
/*
* Make sure the floppy controller is the correct density mode
*/
if(sc->flags & FLPF_ISHD)
DMA->dma_drvmode |= (FDC_HDSET|FDC_HDSIG);
else DMA->dma_drvmode &= ~(FDC_HDSET|FDC_HDSIG);
fd_xfer(sc);
}
/*
* The current transaction is finished (for good or bad). Let go of
* the the dma-resources. Call biodone() to finish the transaction.
* Find a new transaction to work on.
*/
static void
fddone(sc)
register struct fd_softc *sc;
{
struct buf *bp, *dp;
struct fd_softc *sc1;
int i;
/*
* Lower clock frequency of FDC (better for some old ones).
*/
DMA->dma_drvmode &= ~(FDC_HDSET|FDC_HDSIG);
dp = &sc->bufq;
bp = dp->b_actf;
if(bp == NULL)
panic("fddone");
dp->b_actf = bp->b_actf;
#ifdef FLP_DEBUG
printf("fddone: unit: %d, buf: %x, resid: %d\n",sc->unit,bp,
sc->io_bytes);
#endif
/*
* Give others a chance to use the dma.
*/
fd_in_dma = 0; dmafree();
/*
* Finish current transaction.
*/
bp->b_resid = sc->io_bytes;
biodone(bp);
if(fd_in_dma)
return; /* XXX Is this possible? */
/*
* Find a new transaction on round-robin basis.
*/
for(i = sc->unit + 1; ;i++) {
if(i >= fdcd.cd_ndevs)
i = 0;
if((sc1 = fdcd.cd_devs[i]) == NULL)
continue;
if(sc1->bufq.b_actf)
break;
if(i == sc->unit) {
timeout((FPV)fdmotoroff, (void*)sc, FLP_MONDELAY);
#ifdef FLP_DEBUG
printf("fddone: Nothing to do\n");
#endif
return; /* No work */
}
}
fd_state = FLP_IDLE;
#ifdef FLP_DEBUG
printf("fddone: Staring job on unit %d\n", sc1->unit);
#endif
fd_in_dma = 1; dmagrab(fdcint, fdstart, sc1);
}
/****************************************************************************
* The following functions assume to be running as a result of a *
* disk-interrupt (e.q. spl = splbio). *
* They form the finit-state machine, the actual driver. *
* *
* fdstart()/ --> fd_xfer() -> activate hardware *
* fdopen() ^ *
* | *
* +-- not ready -<------------+ *
* | *
* fdmotoroff()/ --> fdcint() -> fd_xfer_ok() ---+ *
* h/w interrupt | *
* \|/ *
* finished ---> fdone() *
* *
****************************************************************************/
static void
fd_xfer(sc)
struct fd_softc *sc;
{
register int head = 0;
register int track, sector, hbit;
int i;
u_long phys_addr;
if(fd_state != FLP_XFER)
panic("fd_xfer: wrong state (0x%x)", fd_state);
/*
* Calculate head/track values
*/
track = sc->sector / sc->nsectors;
head = track % sc->nheads;
track = track / sc->nheads;
#ifdef FLP_DEBUG
printf("fd_xfer: sector:%d,head:%d,track:%d\n", sc->sector,head,track);
#endif
/*
* Determine if the controller should check spin-up.
*/
hbit = motoron ? HBIT : 0;
motoron = 1;
/*
* Select the right unit and head.
*/
i = (sc->unit ? PA_FLOP1 : PA_FLOP0) | head;
if(i != selected) {
selected = i;
SOUND->sd_selr = YM_IOA;
SOUND->sd_wdat = (SOUND->sd_rdat & 0xF8) | (i ^ 0x07);
}
if(sc->curtrk == INV_TRK) {
/*
* Recalibrate, since we lost track of head positioning.
* The floppy disk controller has no way of determining its
* absolute arm position (track). Instead, it steps the
* arm a track at a time and keeps track of where it
* thinks it is (in software). However, after a SEEK, the
* hardware reads information from the diskette telling
* where the arm actually is. If the arm is in the wrong place,
* a recalibration is done, which forces the arm to track 0.
* This way the controller can get back into sync with reality.
*/
dmawdat(FDC_CS, RESTORE|VBIT|hbit, FDC_DELAY);
fd_cmd = RESTORE;
timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);
#ifdef FLP_DEBUG
printf("fd_xfer:Recalibrating drive %d\n", sc->unit);
#endif
return;
}
dmawdat(FDC_TR, sc->curtrk, FDC_DELAY);
/*
* Issue a SEEK command on the indicated drive unless the arm is
* already positioned on the correct track.
*/
if(track != sc->curtrk) {
sc->curtrk = track; /* be optimistic */
dmawdat(FDC_DR, track, FDC_DELAY);
dmawdat(FDC_CS, SEEK|RATE6|VBIT|hbit, FDC_DELAY);
timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);
fd_cmd = SEEK;
#ifdef FLP_DEBUG
printf("fd_xfer:Seek to track %d on drive %d\n",track,sc->unit);
#endif
return;
}
/*
* The drive is now on the proper track. Read or write 1 block.
*/
sector = sc->sector % sc->nsectors;
sector++; /* start numbering at 1 */
dmawdat(FDC_SR, sector, FDC_DELAY);
phys_addr = (u_long)kvtop(sc->io_data);
if(phys_addr >= FDC_MAX_DMA_AD) {
/*
* We _must_ bounce this address
*/
phys_addr = (u_long)kvtop(sc->bounceb);
if(sc->io_dir == B_WRITE)
bcopy(sc->io_data, sc->bounceb, SECTOR_SIZE);
sc->flags |= FLPF_BOUNCE;
}
dmaaddr(phys_addr); /* DMA address setup */
#ifdef FLP_DEBUG
printf("fd_xfer:Start io (io_addr:%x)\n", kvtop(sc->io_data));
#endif
if(sc->io_dir == B_READ) {
/* Issue the command */
dmacomm(FDC | SCREG, 1, 0);
dmawdat(FDC_CS, F_READ|hbit, FDC_DELAY);
fd_cmd = F_READ;
}
else {
/* Issue the command */
dmacomm(WRBIT | FDC | SCREG, 1, FDC_DELAY);
dmawdat(WRBIT | FDC_CS, F_WRITE|hbit|EBIT|PBIT, FDC_DELAY);
fd_cmd = F_WRITE;
}
timeout((FPV)fdmotoroff, (void*)sc, FLP_XFERDELAY);
}
/* return values of fd_xfer_ok(): */
#define X_OK 0
#define X_AGAIN 1
#define X_ERROR 2
#define X_FAIL 3
/*
* Hardware interrupt function.
*/
static int
fdcint(sc)
struct fd_softc *sc;
{
struct buf *bp;
#ifdef FLP_DEBUG
printf("fdcint: unit = %d\n", sc->unit);
#endif
/*
* Cancel timeout (we made it, didn't we)
*/
untimeout((FPV)fdmotoroff, (void*)sc);
switch(fd_xfer_ok(sc)) {
case X_ERROR :
if(++(sc->errcnt) < MAX_ERRORS) {
/*
* Command failed but still retries left.
*/
break;
}
/* FALL THROUGH */
case X_FAIL :
/*
* Non recoverable error. Fall back to motor-on
* idle-state.
*/
bp = sc->bufq.b_actf;
bp->b_error = EIO;
bp->b_flags |= B_ERROR;
fd_state = FLP_MON;
if(fd_error != NULL) {
printf("Floppy error: %s\n", fd_error);
fd_error = NULL;
}
break;
case X_AGAIN:
/*
* Start next part of state machine.
*/
break;
case X_OK:
/*
* Command ok and finished. Reset error-counter.
* If there are no more bytes to transfer fall back
* to motor-on idle state.
*/
sc->errcnt = 0;
if((sc->flags & FLPF_BOUNCE) && (sc->io_dir == B_READ))
bcopy(sc->bounceb, sc->io_data, SECTOR_SIZE);
sc->flags &= ~FLPF_BOUNCE;
sc->sector++;
sc->io_data += SECTOR_SIZE;
sc->io_bytes -= SECTOR_SIZE;
if(sc->io_bytes <= 0)
fd_state = FLP_MON;
}
if(fd_state == FLP_MON)
fddone(sc);
else fd_xfer(sc);
}
/*
* Determine status of last command. Should only be called through
* 'fdcint()'.
* Returns:
* X_ERROR : Error on command; might succeed next time.
* X_FAIL : Error on command; will never succeed.
* X_AGAIN : Part of a command succeeded, call 'fd_xfer()' to complete.
* X_OK : Command succeeded and is complete.
*
* This function only affects sc->curtrk.
*/
static int
fd_xfer_ok(sc)
register struct fd_softc *sc;
{
register int status;
switch(fd_cmd) {
case IRUPT:
/*
* Timeout. Force a recalibrate before we try again.
*/
fd_error = "Timeout";
sc->curtrk = INV_TRK;
return(X_ERROR);
case F_READ:
/*
* Test for DMA error
*/
status = dmastat(FDC_CS | SCREG, 0);
if(!(status & DMAOK)) {
fd_error = "Dma error";
return(X_ERROR);
}
/*
* Get controller status and check for errors.
*/
status = dmardat(FDC_CS, FDC_DELAY);
if(status & (RNF | CRCERR | LD_T00)) {
fd_error = "Read error";
if(status & RNF)
sc->curtrk = INV_TRK;
return(X_ERROR);
}
break;
case F_WRITE:
/*
* Get controller status and check for errors.
*/
status = dmardat(WRBIT | FDC_CS, FDC_DELAY);
if(status & WRI_PRO) {
fd_error = "Write protected";
return(X_FAIL);
}
if(status & (RNF | CRCERR | LD_T00)) {
fd_error = "Write error";
sc->curtrk = INV_TRK;
return(X_ERROR);
}
break;
case SEEK:
status = dmardat(FDC_CS, FDC_DELAY);
if(status & (RNF | CRCERR)) {
fd_error = "Seek error";
sc->curtrk = INV_TRK;
return(X_ERROR);
}
return(X_AGAIN);
case RESTORE:
/*
* Determine if the recalibration succeeded.
*/
status = dmardat(FDC_CS, FDC_DELAY);
if(status & RNF) {
fd_error = "Recalibrate error";
/* reset controller */
dmawdat(FDC_CS, IRUPT, FDC_DELAY);
sc->curtrk = INV_TRK;
return(X_ERROR);
}
sc->curtrk = 0;
return(X_AGAIN);
default:
fd_error = "Driver error: fd_xfer_ok : Unknown state";
return(X_FAIL);
}
return(X_OK);
}
/*
* All timeouts will call this function.
*/
static void
fdmotoroff(sc)
struct fd_softc *sc;
{
int sps, wrbit;
/*
* Get at harware interrupt level
*/
sps = splbio();
#if FLP_DEBUG
printf("fdmotoroff, state = 0x%x\n", fd_state);
#endif
switch(fd_state) {
case FLP_XFER :
/*
* Timeout during a transfer; cancel transaction
* set command to 'IRUPT'.
* A drive-interrupt is simulated to trigger the state
* machine.
*/
/*
* Cancel current transaction
*/
wrbit = (fd_cmd == F_WRITE) ? WRBIT : 0;
fd_cmd = IRUPT;
dmawdat(FDC_CS, wrbit|IRUPT, FDC_DELAY);
/*
* Simulate floppy interrupt.
*/
fdcint(sc);
return;
case FLP_MON :
/*
* Turn motor off.
*/
if(selected) {
SOUND->sd_selr = YM_IOA;
SOUND->sd_wdat = SOUND->sd_rdat | 0x07;
motoron = selected = 0;
}
fd_state = FLP_IDLE;
break;
}
splx(sps);
}
/*
* min byte count to whats left of the track in question
*/
static int
fdminphys(bp)
struct buf *bp;
{
struct fd_softc *sc;
int sec, toff, tsz;
if((sc = getsoftc(fdcd, DISKUNIT(bp->b_dev))) == NULL)
return(ENXIO);
sec = bp->b_blkno % (sc->nsectors * sc->nheads);
toff = sec * SECTOR_SIZE;
tsz = sc->nsectors * sc->nheads * SECTOR_SIZE;
#ifdef FLP_DEBUG
printf("fdminphys: before %d", bp->b_bcount);
#endif
bp->b_bcount = min(bp->b_bcount, tsz - toff);
#ifdef FLP_DEBUG
printf(" after %d\n", bp->b_bcount);
#endif
return(bp->b_bcount);
}
/*
* Used to find out wich drives are actually connected. We do this by issueing
* is 'RESTORE' command and check if the 'track-0' bit is set. This also works
* if the drive is present but no floppy is inserted.
*/
static void
fdtestdrv(fdsoftc)
struct fd_softc *fdsoftc;
{
int i, status;
/*
* Select the right unit and head.
*/
i = fdsoftc->unit ? PA_FLOP1 : PA_FLOP0;
if(i != selected) {
selected = i;
SOUND->sd_selr = YM_IOA;
SOUND->sd_wdat = (SOUND->sd_rdat & 0xF8) | (i ^ 0x07);
}
dmawdat(FDC_CS, RESTORE|VBIT|HBIT, FDC_DELAY);
/*
* Wait for about 2 seconds.
*/
delay(2000000);
status = dmardat(FDC_CS, FDC_DELAY);
if(status & (RNF|BUSY))
dmawdat(FDC_CS, IRUPT, FDC_DELAY); /* reset controller */
if(!(status & LD_T00))
fdsoftc->flags |= FLPF_NOTRESP;
}
/*
* Build disk label. For now we only create a label from what we know
* from 'sc'.
*/
static int
fdgetdisklabel(sc, dev)
struct fd_softc *sc;
dev_t dev;
{
struct disklabel *lp, *dlp;
int part;
/*
* If we already got one, get out.
*/
if(sc->flags & FLPF_HAVELAB)
return(0);
#ifdef FLP_DEBUG
printf("fdgetdisklabel()\n");
#endif
part = DISKPART(dev);
lp = &sc->dkdev.dk_label;
bzero(lp, sizeof(struct disklabel));
lp->d_secsize = SECTOR_SIZE;
lp->d_ntracks = sc->nheads;
lp->d_nsectors = sc->nsectors;
lp->d_secpercyl = lp->d_ntracks * lp->d_nsectors;
lp->d_ncylinders = sc->nblocks / lp->d_secpercyl;
lp->d_secperunit = sc->nblocks;
lp->d_type = DTYPE_FLOPPY;
lp->d_rpm = 300; /* good guess I suppose. */
lp->d_interleave = 1; /* FIXME: is this OK? */
lp->d_bbsize = 0;
lp->d_sbsize = 0;
lp->d_npartitions = part + 1;
lp->d_trkseek = STEP_DELAY;
lp->d_magic = DISKMAGIC;
lp->d_magic2 = DISKMAGIC;
lp->d_checksum = dkcksum(lp);
lp->d_partitions[part].p_size = lp->d_secperunit;
lp->d_partitions[part].p_fstype = FS_UNUSED;
lp->d_partitions[part].p_fsize = 1024;
lp->d_partitions[part].p_frag = 8;
sc->flags |= FLPF_HAVELAB;
return(0);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to fd.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / sys / arch / atari / dev