Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files. =================================================================== RCS file: /ftp/cvs/cvsroot/src/sys/arch/atari/conf/FALCON,v rcsdiff: /ftp/cvs/cvsroot/src/sys/arch/atari/conf/FALCON,v: warning: Unknown phrases like `commitid ...;' are present. retrieving revision 1.60.2.3 retrieving revision 1.60.2.4 diff -u -p -r1.60.2.3 -r1.60.2.4 --- src/sys/arch/atari/conf/FALCON 2004/07/15 20:41:35 1.60.2.3 +++ src/sys/arch/atari/conf/FALCON 2007/08/11 14:50:28 1.60.2.4 @@ -1,262 +1,121 @@ # -# $NetBSD: FALCON,v 1.60.2.3 2004/07/15 20:41:35 he Exp $ +# $NetBSD: FALCON,v 1.60.2.4 2007/08/11 14:50:28 bouyer Exp $ # # This file was automatically created. Changes will be # lost when running makeconf in this directory. # # Created from: # NetBSD: FALCON.in,v 1.7 2003/10/08 11:05:27 bouyer Exp $ -# NetBSD$ - -#This configuration file is for a generic ATARI-Falcon - -#Define 'INSTALL_KERNEL' or 'INSTALLX_KERNEL' to generate a BOOT or -#BOOTX kernel respectively. - -#There is no possibility for physical network interfaces. Use the define -#below to turn off vlan, pppoe, bridge and NETATALK. - -#Generic atari - +# NetBSD: GENERIC.in,v 1.33.2.4 2007/08/11 14:49:05 bouyer Exp $ include "arch/atari/conf/std.atari" - -options INCLUDE_CONFIG_FILE # embed config file in kernel binary - -#Add support for about 16 users. This variable is used to size -#various kernel structures. - -maxusers 16 - -options HZ=64 # Set the clock-rate (48/64/96) - -#Standard system options -options INSECURE # disable kernel security levels -#options NTP # NTP phase/frequency locked loop - -#Enable experimental buffer queue strategy for better responsiveness under -#high disk I/O load. Use it with caution - it's not proven to be stable yet. -#options NEW_BUFQ_STRATEGY - -#(Co)processors this kernel should support - -options M68030 # support for 030 -options FPU_EMULATE # Support for MC68881/MC68882 emulator - -options M68040 # support for 040 -options FPSP # 68040 Floatingpoint support - -#Networking options - -options INET # IP + ICMP + TCP + UDP - -options INET6 # IPV6 -#options IPSEC # IP security -#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) -#options IPSEC_DEBUG # debug for IP security -#options GATEWAY # packet forwarding -#options MROUTING # IP multicast routing -options NS # XNS -#options NSIP # XNS tunneling over IP -options ISO,TPIP # OSI -#options EON # OSI tunneling over IP -options CCITT,LLC,HDLC # X.25 - -options PPP_BSDCOMP # BSD-Compress compression support for PPP -options PPP_DEFLATE # Deflate compression support for PPP -options PPP_FILTER # Active filter support for PPP (requires bpf) - -options PFIL_HOOKS # pfil(9) packet filter hooks -options IPFILTER_LOG # ipmon(8) log support -#options IPFILTER_DEFAULT_BLOCK # block packages by default - -#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG - -#options ALTQ # Manipulate network interfaces' output queues -#options ALTQ_BLUE # Stochastic Fair Blue -#options ALTQ_CBQ # Class-Based Queueing -#options ALTQ_CDNR # Diffserv Traffic Conditioner -#options ALTQ_FIFOQ # First-In First-Out Queue -#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) -#options ALTQ_HFSC # Hierarchical Fair Service Curve -#options ALTQ_LOCALQ # Local queueing discipline -#options ALTQ_PRIQ # Priority Queueing -#options ALTQ_RED # Random Early Detection -#options ALTQ_RIO # RED with IN/OUT -#options ALTQ_WFQ # Weighted Fair Queueing - -#File systems -file-system FFS # Berkeley fast file system -file-system MFS # Memory based filesystem -file-system KERNFS # Kernel parameter filesystem -file-system MSDOSFS # MSDOS filesystem -file-system CD9660 # ISO 9660 filesystem with Rock Ridge - -file-system NFS # Network File System client side code -file-system PROCFS # Process filesystem -file-system FDESC # /dev/fd -file-system NULLFS # Loopback filesystem -file-system OVERLAY # overlay filesystem -file-system UNION # union file system -file-system UMAPFS # null file system (with uid & gid remapping) -file-system PORTAL # portal file system -file-system EXT2FS # second extended file system (linux) -file-system LFS # log-structured file system - -#File system options -options QUOTA # Disk quotas for local disks -#options FFS_EI # FFS Endian Independant support -options SOFTDEP # FFS soft updates support. -options NFSSERVER # Network File System server side code -#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and - # immutable) behave as system flags. - -#Misc. debugging options - -options PANICWAIT # Require keystroke to dump/reboot -options DDB # Kernel debugger - -options DDB_HISTORY_SIZE=100 # Enable history editing in DDB -#options DEBUG # expensive debugging checks/support - -#Compatibility options for various existing systems - -options COMPAT_43 # 4.3 BSD compatible system calls (required) -options COMPAT_10 # Compatibility to NetBSD1.0 -options COMPAT_11 # Compatibility to NetBSD1.1 -options COMPAT_12 # Compatibility to NetBSD1.2 -options COMPAT_13 # Compatibility to NetBSD1.3 -options COMPAT_14 # Compatibility to NetBSD1.4 -options COMPAT_15 # Compatibility to NetBSD1.5 -options COMPAT_16 # Compatibility to NetBSD1.6 - -#options COMPAT_09 # has no meaning on the atari -#options COMPAT_SUNOS # Support to run Sun-3 executables -#options COMPAT_SVR4 # Support to run SVR4 executables -#options COMPAT_LINUX # Support to run Linux/m68k executables -#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. - -options COMPAT_AOUT_M68K # Compatibility to a.out executables -options EXEC_AOUT # a.out format executables - -#Support for System V IPC facilities. - -options SYSVSHM # System V shared memory -options SYSVMSG # System V messages -options SYSVSEM # System V semaphores -#options SEMMNI=10 # number of semaphore identifiers -#options SEMUME=10 # max number of undo entries per proc. -#options SEMMNU=30 # number of undo structures in system -options P1003_1B_SEMAPHORE # p1003.1b semaphore support - -#Support for various kernel options - -options KTRACE # Add kernel tracing system call -options SYSTRACE # system call vetting via systrace(1) -options DIAGNOSTIC # Add additional error checking code -options USERCONF # userconf(4) support -#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) -options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel - -#These options enable verbose messages for several subsystems. -#Warning, these may compile large string tables into the kernel! - -options SCSIVERBOSE # human readable SCSI error messages - -#Atari specific options - -#options KFONT_8x8 # Use 8x8 font instead of 8x16 -options ST_POOL_SIZE=22 # smallest that allows TT-HIGH - -options FALCON_SCSI # SCSI-support for Falcon -options FALCON_VIDEO # Graphics support for FALCON - -options MEMORY_DISK_HOOKS # Boot RAM-disk -options DISKLABEL_NBDA # NetBSD disklabels (required) -options DISKLABEL_AHDI # NetBSD/AHDI disklabels - -options SERCONSOLE # modem1 console support -options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM -options MSGBUFSIZE=32768 # size of kernel msg. buffer -#options STATCLOCK # Separate {stat,prof}clock - -#Try linked commands on all targets -options TRY_SCSI_LINKED_COMMANDS=0x7f - -#Build one kernel that can boot from any disk. - -config netbsd root on ? type ? - -pseudo-device sl # Slip -pseudo-device ppp # ppp - -pseudo-device pty # pseudo-terminals -pseudo-device loop # Loopback network -pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) -pseudo-device md 3 # Boot memory disk - -pseudo-device bpfilter 2 # berkeley packet filters -pseudo-device tun 2 # network tunnel -#pseudo-device gre 2 # generic L3 over IP tunnel -pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) -#pseudo-device faith 1 # IPv[46] tcp relay translation i/f -#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation - -pseudo-device ccd 4 # concatenating disk driver -#pseudo-device cgd 4 # cryptographic disk driver -pseudo-device raid 8 # RAIDframe disk driver -options RAID_AUTOCONFIG # auto-configuration of RAID components -#Options to enable various other RAIDframe RAID types. -#options RF_INCLUDE_EVENODD=1 -#options RF_INCLUDE_RAID5_RS=1 -#options RF_INCLUDE_PARITYLOGGING=1 -#options RF_INCLUDE_CHAINDECLUSTER=1 -#options RF_INCLUDE_INTERDECLUSTER=1 -#options RF_INCLUDE_PARITY_DECLUSTERING=1 -#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 -pseudo-device ipfilter # IP filtering device -pseudo-device rnd # /dev/random and in-kernel generator -pseudo-device clockctl # user control of clock subsystem - -#Hardware options for GENERIC are in the various machine type specific files - -pseudo-device view 4 # View (graphics mapping) - -pseudo-device mouse 1 # mouse - -#The following sections describe various hardware options. - -ncrscsi0 at mainbus0 # NCR5380 SCSI driver -scsibus0 at ncrscsi0 # SCSI bus -zs0 at mainbus0 # Serial support through 8530 -grfbus0 at mainbus0 # bitmapped display's -grfcc0 at grfbus0 # graphics driver -ite0 at grfcc0 # console -nvr0 at mainbus0 # nvram driver - -grfcc1 at grfbus0 # 2nd graphics driver -ite1 at grfcc1 # 2nd tty -grfcc2 at grfbus0 # 3rd graphics driver -ite2 at grfcc2 # 3rd tty -lp0 at mainbus0 # centronics printer -ser0 at mainbus0 # UART on first 68901 (ttyB0) - -wdc0 at mainbus0 # IDE-bus -atabus* at wdc? channel ? -wd* at atabus? drive ? - - # ATAPI bus support +options INCLUDE_CONFIG_FILE # embed config file in kernel binary +maxusers 16 +options HZ=64 # Set the clock-rate (48/64/96) +options INSECURE # disable kernel security levels +options M68030 # support for 030 +options FPU_EMULATE # Support for MC68881/MC68882 emulator +options M68040 # support for 040 +options FPSP # 68040 Floatingpoint support +options INET # IP + ICMP + TCP + UDP +options INET6 # IPV6 +options NS # XNS +options CCITT,LLC,HDLC # X.25 +options PPP_BSDCOMP # BSD-Compress compression support for PPP +options PPP_DEFLATE # Deflate compression support for PPP +options PPP_FILTER # Active filter support for PPP (requires bpf) +options PFIL_HOOKS # pfil(9) packet filter hooks +options IPFILTER_LOG # ipmon(8) log support +file-system FFS # Berkeley fast file system +file-system MFS # Memory based filesystem +file-system KERNFS # Kernel parameter filesystem +file-system MSDOSFS # MSDOS filesystem +file-system CD9660 # ISO 9660 filesystem with Rock Ridge +file-system NFS # Network File System client side code +file-system PROCFS # Process filesystem +file-system FDESC # /dev/fd +file-system NULLFS # Loopback filesystem +file-system OVERLAY # overlay filesystem +file-system UNION # union file system +file-system UMAPFS # null file system (with uid & gid remapping) +file-system PORTAL # portal file system +file-system EXT2FS # second extended file system (linux) +file-system LFS # log-structured file system +options QUOTA # Disk quotas for local disks +options SOFTDEP # FFS soft updates support. +options NFSSERVER # Network File System server side code +options PANICWAIT # Require keystroke to dump/reboot +options DDB # Kernel debugger +options DDB_HISTORY_SIZE=100 # Enable history editing in DDB +options COMPAT_43 # 4.3 BSD compatible system calls (required) +options COMPAT_10 # Compatibility to NetBSD1.0 +options COMPAT_11 # Compatibility to NetBSD1.1 +options COMPAT_12 # Compatibility to NetBSD1.2 +options COMPAT_13 # Compatibility to NetBSD1.3 +options COMPAT_14 # Compatibility to NetBSD1.4 +options COMPAT_15 # Compatibility to NetBSD1.5 +options COMPAT_16 # Compatibility to NetBSD1.6 +options COMPAT_AOUT_M68K # Compatibility to a.out executables +options EXEC_AOUT # a.out format executables +options SYSVSHM # System V shared memory +options SYSVMSG # System V messages +options SYSVSEM # System V semaphores +options P1003_1B_SEMAPHORE # p1003.1b semaphore support +options KTRACE # Add kernel tracing system call +options SYSTRACE # system call vetting via systrace(1) +options DIAGNOSTIC # Add additional error checking code +options USERCONF # userconf(4) support +options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel +options SCSIVERBOSE # human readable SCSI error messages +options ST_POOL_SIZE=22 # smallest that allows TT-HIGH +options FALCON_SCSI # SCSI-support for Falcon +options FALCON_VIDEO # Graphics support for FALCON +options MEMORY_DISK_HOOKS # Boot RAM-disk +options DISKLABEL_NBDA # NetBSD disklabels (required) +options DISKLABEL_AHDI # NetBSD/AHDI disklabels +options SERCONSOLE # modem1 console support +options RELOC_KERNEL # TT/Falcon: relocate kernel to TT-RAM +options MSGBUFSIZE=32768 # size of kernel msg. buffer +options TRY_SCSI_LINKED_COMMANDS=0x7f +config netbsd root on ? type ? +pseudo-device sl # Slip +pseudo-device ppp # ppp +pseudo-device pty # pseudo-terminals +pseudo-device loop # Loopback network +pseudo-device vnd 3 # 3 pseudo disks (see vnconfig) +pseudo-device md 3 # Boot memory disk +pseudo-device bpfilter 2 # berkeley packet filters +pseudo-device tun 2 # network tunnel +pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) +pseudo-device ccd 4 # concatenating disk driver +pseudo-device raid 8 # RAIDframe disk driver +options RAID_AUTOCONFIG # auto-configuration of RAID components +pseudo-device ipfilter # IP filtering device +pseudo-device rnd # /dev/random and in-kernel generator +pseudo-device clockctl # user control of clock subsystem +pseudo-device view 4 # View (graphics mapping) +pseudo-device mouse 1 # mouse +ncrscsi0 at mainbus0 # NCR5380 SCSI driver +scsibus0 at ncrscsi0 # SCSI bus +zs0 at mainbus0 # Serial support through 8530 +grfbus0 at mainbus0 # bitmapped display's +grfcc0 at grfbus0 # graphics driver +ite0 at grfcc0 # console +nvr0 at mainbus0 # nvram driver +grfcc1 at grfbus0 # 2nd graphics driver +ite1 at grfcc1 # 2nd tty +grfcc2 at grfbus0 # 3rd graphics driver +ite2 at grfcc2 # 3rd tty +lp0 at mainbus0 # centronics printer +ser0 at mainbus0 # UART on first 68901 (ttyB0) +wdc0 at mainbus0 # IDE-bus +atabus* at wdc? channel ? +wd* at atabus? drive ? atapibus* at atabus? - -#ATAPI devices -cd* at atapibus? drive ? # ATAPI CD-ROM drives - -#SCSI devices -sd* at scsibus? target ? lun ? # SCSI disk drives -st* at scsibus? target ? lun ? # SCSI tape drives -cd* at scsibus? target ? lun ? # SCSI CD-ROM drives - -ch* at scsibus? target ? lun ? # SCSI autochangers -ss* at scsibus? target ? lun ? # SCSI scanners -se* at scsibus? target ? lun ? # SCSI ethernet -uk* at scsibus? target ? lun ? # SCSI unknown - +cd* at atapibus? drive ? # ATAPI CD-ROM drives +sd* at scsibus? target ? lun ? # SCSI disk drives +st* at scsibus? target ? lun ? # SCSI tape drives +cd* at scsibus? target ? lun ? # SCSI CD-ROM drives +ch* at scsibus? target ? lun ? # SCSI autochangers +ss* at scsibus? target ? lun ? # SCSI scanners +se* at scsibus? target ? lun ? # SCSI ethernet +uk* at scsibus? target ? lun ? # SCSI unknown