CVS log for src/sys/arch/arm/sunxi/sunxi_mixer.c

Up to [cvs.NetBSD.org] / src / sys / arch / arm / sunxi

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Add support for Lichee Pi Zero from Rui-Xiang Guo on port-arm

Sort includes.

Get drm to build on arm64 again.


Author: Jared McNeill <jmcneill@NetBSD.org>
Committer: Taylor R Campbell <riastradh@NetBSD.org>

Sync with HEAD.

Rename of_match_compat_data() to of_compatible_match().  Similarly,
rename of_search_compatible() to of_compatible_lookup().

Standardize on of_compatible_match() for driver matching, and adapt
all call sites.

Use DEVICE_COMPAT_EOL.

Since we're using designated initialisers for compat data, we should
use a completely empty initializer for the sentinel.

Remove "struct of_compat_data" and replace its usage with
"struct device_compatible_entry"; they are ABI-compatible.

Fix several "loses const qualifier" bugs encountered during
this conversion.

Treat ARGB/XRGB as BGRA/BGRX on big endian kernels.

Merge changes from current as of 20200406

Sync with head.

Improve compatibility with newer A64 DE2 DTB endpoint numbers.

Should fix video output with new Linux 5.5rc DTBs on A64/H2/H3/H5-based SoCs.

Pull up following revision(s) (requested by jmcneill in ticket #470):

	sys/arch/arm/sunxi/sunxi_hdmiphy.c: revision 1.4
	sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.16
	sys/dev/ic/dw_hdmi.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_hdmiphy.h: revision 1.2
	sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.17
	sys/dev/ic/dw_hdmi.c: revision 1.6
	sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.18
	sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.19
	sys/dev/ic/dw_hdmi.h: revision 1.5
	sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.8
	sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.9
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.22
	sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_dwhdmi.c: revision 1.8
	sys/arch/arm/sunxi/sun50i_a64_ccu.c: revision 1.20
	sys/arch/arm/sunxi/sunxi_mixer.c: revision 1.10
	sys/arch/arm/dts/sun50i-a64-pinebook.dts: revision 1.17
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.38
	sys/dev/fdt/fdt_port.c: revision 1.3
	sys/dev/fdt/fdt_port.c: revision 1.4
	sys/arch/arm/sunxi/sunxi_ccu_fractional.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_lcdc.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_ccu_fractional.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_hdmiphy.c: revision 1.3

Fix CLK_BUS_HDMI bit

Enable TMDS clock

Store the flags passed to SUNXI_CCU_FRACTIONAL macro.
Previously the macro dropped the flags argument entirely, and did not
initialize the structure with it.

Allow bus glue to setup DDC clocks

Add TCON0 clock

HDMI PHY and TX share the same clocks. Do not enable clocks until both
reset resources have been deasserted. Explicitly set DDC clock dividers.
Honour SUNXI_CCU_FRACTIONAL_SET_ENABLE in fractional mode

Use fdtbus_get_reg to read "reg" property

Need to initialize the PHY before HPD sense and DDC will work

Set pixel clock on mode set

Set TCON1 parent to PLL_VIDEO1(1X)

Do not assume that an fb's pitch is width * 4 bytes.

Use actual hw mode, not proposed mode.

Set pre-divider M to 0 in fractional mode, as noted in user manual. Spotted by jak.

Support non-zero fb start pixels.

Set video PLLs to 297MHz

Do not assume the cursor pitch is the same as the primary fb

Enable HDMI and HDMI audio

Try to avoid changing hardware settings when the "nomodeset" kernel arg
is present.

Do not assume the cursor pitch is the same as the primary fb

Support non-zero fb start pixels.

Do not assume that an fb's pitch is width * 4 bytes.

Sync with HEAD

file sunxi_mixer.c was added on branch phil-wifi on 2019-06-10 22:05:57 +0000

Fix HDMI output; only install cursor_set/cursor_move funcs if hardware cursor is available.

Add support for hardware cursors where we can.

As far as I can tell, alpha blending only works between overlay channels,
and not between layers on a channel. Unfortunately, RT-Mixer1 only has
a single UI channel, so this feature is limited to RT-Mixer0.

Implement page flip API

Add support for video layer scaling and colour space conversion.

Add support for vblank irq and RGB overlay planes.

Add support for Allwinner H3/H5 display pipeline.

Add support for Allwinner A64's display pipeline.