The NetBSD Project

src/sys/arch/arm/sunxi/

Click on a directory to enter that directory. Click on a file to display its revision history and to get a chance to display diffs between revisions.

Current directory: [cvs.NetBSD.org] / src / sys / arch / arm / sunxi


File Rev. Age Author Last log entry
[BACK] Parent Directory        
[DIR] Attic/  [Don't hide]        
[TXT] files.sunxi  1.57   2 months  jmcneill   Move simplefb declaration to files.fdt
[TXT] sun4i_a10_ccu.c  1.9   4 months  bouyer   Add missing A10_RST_LVDS entry fix sun4i_a10_ac_dig_table[] with values from arm...
[TXT] sun4i_a10_ccu.h  1.1   10 months  jmcneill   branches: 1.1.2; Add driver for sun4i (A10) and sun7i (A20) clock controller.
[TXT] sun4i_a10_codec.c  1.2   11 months  jmcneill   branches: 1.2.2; Setup routing at init and toggle PA mute pin (if available) fo...
[TXT] sun4i_a10_gpio.c  1.4   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun4i_dma.c  1.3   4 months  bouyer   sun4idma_halt(): do not set the control register to 0 but just clear the LOAD bi...
[TXT] sun4i_emac.c  1.5   4 weeks  sevan   Be consistent among ethernet drivers on the convention for printing ethernet add...
[TXT] sun50i_a64_acodec.c  1.8   3 months  jmcneill   branches: 1.8.2; Add mic preamp controls and unswap L/R DAC channels to ADC mix...
[TXT] sun50i_a64_ccu.c  1.9   3 months  jmcneill   Set SUNXI_CCU_NM_DIVIDE_BY_TWO on mmc module clocks. There is an undocumented po...
[TXT] sun50i_a64_ccu.h  1.1   11 months  jmcneill   branches: 1.1.2; Add support for Allwinner A64 SoCs.
[TXT] sun50i_a64_gpio.c  1.3   3 months  jmcneill   Rename pwm0 function to pwm for PD22
[TXT] sun50i_a64_r_ccu.c  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner A64 PRCM CCU
[TXT] sun50i_a64_r_ccu.h  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner A64 PRCM CCU
[TXT] sun50i_h6_ccu.c  1.1   3 months  jmcneill   branches: 1.1.2; Add support for Allwinner H6 CCU.
[TXT] sun50i_h6_ccu.h  1.1   3 months  jmcneill   branches: 1.1.2; Add support for Allwinner H6 CCU.
[TXT] sun50i_h6_gpio.c  1.2   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun50i_h6_r_ccu.c  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner H6 PRCM CCU.
[TXT] sun50i_h6_r_ccu.h  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner H6 PRCM CCU.
[TXT] sun5i_a13_ccu.c  1.5   9 months  jmcneill   branches: 1.5.2; add NAND module clock
[TXT] sun5i_a13_ccu.h  1.1   11 months  jmcneill   branches: 1.1.2; 1.1.4; Add initial support for Allwinner A13 and R8 SoCs.
[TXT] sun5i_a13_gpio.c  1.3   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun6i_a31_ccu.c  1.4   10 months  jmcneill   branches: 1.4.2; add audio pll and codec clocks
[TXT] sun6i_a31_ccu.h  1.1   13 months  jmcneill   branches: 1.1.4; 1.1.6; 1.1.8; Add basic support for Allwinner A31.
[TXT] sun6i_a31_codec.c  1.1   10 months  jmcneill   branches: 1.1.2; Add A31 audio codec support.
[TXT] sun6i_a31_gpio.c  1.3   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun6i_dma.c  1.5   3 months  jmcneill   32-bit build fix
[TXT] sun6i_spi.c  1.2   6 months  jakllsch   wait at most one second for controller to complete reset
[TXT] sun6i_spireg.h  1.1   6 months  jakllsch   Add register definitions file for sun6i_spi I forgot to add earlier.
[TXT] sun7i_a20_ccu.h  1.1   10 months  jmcneill   branches: 1.1.2; Add driver for sun4i (A10) and sun7i (A20) clock controller.
[TXT] sun7i_a20_gpio.c  1.4   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun8i_a83t_ccu.c  1.5   9 months  jmcneill   branches: 1.5.2; add missing clock gates
[TXT] sun8i_a83t_ccu.h  1.2   9 months  jmcneill   branches: 1.2.2; Add A83T clock IDs.
[TXT] sun8i_a83t_gpio.c  1.3   2 months  jmcneill   hdmiddc -> hdmi for function name on PH6/PH7/PH8
[TXT] sun8i_codec.c  1.5   3 months  jmcneill   branches: 1.5.2; Delete whitespace, NFC
[TXT] sun8i_h3_ccu.c  1.15   7 months  jakllsch   Add clocks gates and divisors for H3/H5 SPI[01] controllers.
[TXT] sun8i_h3_ccu.h  1.1   13 months  jmcneill   branches: 1.1.4; 1.1.6; 1.1.8; Add initial support for Allwinner H3 SoC.
[TXT] sun8i_h3_codec.c  1.3   8 months  nat   The reset bit for the analog portion of the codec is bit 28. As per Allwinner H...
[TXT] sun8i_h3_gpio.c  1.2   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun8i_h3_r_ccu.c  1.1   10 months  jmcneill   branches: 1.1.2; Add support for Allwinner H3 PRCM clock controller.
[TXT] sun8i_h3_r_ccu.h  1.1   10 months  jmcneill   branches: 1.1.2; Add support for Allwinner H3 PRCM clock controller.
[TXT] sun9i_a80_ccu.c  1.1   10 months  jmcneill   branches: 1.1.2; Add Allwinner A80 (sun9i) support.
[TXT] sun9i_a80_ccu.h  1.1   10 months  jmcneill   branches: 1.1.2; Add Allwinner A80 (sun9i) support.
[TXT] sun9i_a80_gpio.c  1.2   4 months  bouyer   Consistently name the interrupt function "irq" and use this name in sunxi_gpio_e...
[TXT] sun9i_a80_mmcclk.c  1.1   10 months  jmcneill   branches: 1.1.2; Add Allwinner A80 (sun9i) support.
[TXT] sunxi_can.c  1.1   5 months  bouyer   branches: 1.1.2; fdt-ise the allwinner can and lradc drivers.
[TXT] sunxi_can.h  1.1   5 months  bouyer   branches: 1.1.2; fdt-ise the allwinner can and lradc drivers.
[TXT] sunxi_ccu.c  1.10   3 months  jmcneill   Initialize clk domain name and call clk_attach to register sysctl nodes
[TXT] sunxi_ccu.h  1.18   3 months  jmcneill   Pass set_rate calls on fixed factor clocks through to the parent clock (adjustin...
[TXT] sunxi_ccu_display.c  1.2   4 months  bouyer   branches: 1.2.2; - sunxi_ccu_lcdxch1_set_rate(): enable parent before calling ...
[TXT] sunxi_ccu_div.c  1.5   5 months  bouyer   Make sunxi_ccu_div_set_rate() work on non-SUNXI_CCU_DIV_TIMES_TWO clocks.
[TXT] sunxi_ccu_fixed_factor.c  1.2   3 months  jmcneill   Pass set_rate calls on fixed factor clocks through to the parent clock (adjustin...
[TXT] sunxi_ccu_fractional.c  1.2   4 months  bouyer   Add a round_rate() callback for the sunxi clock domain. Add a sunxi_ccu_display....
[TXT] sunxi_ccu_gate.c  1.2   13 months  jmcneill   branches: 1.2.4; 1.2.6; 1.2.8; Support parents in different clock domains.
[TXT] sunxi_ccu_nkmp.c  1.7   10 months  jmcneill   branches: 1.7.2; Add driver for sun4i (A10) and sun7i (A20) clock controller.
[TXT] sunxi_ccu_nm.c  1.4   9 months  jmcneill   branches: 1.4.2; Add support for A83T eMMC.
[TXT] sunxi_ccu_phase.c  1.1   13 months  jmcneill   branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8; Add SDMMC[012] sample/output clock pha...
[TXT] sunxi_ccu_prediv.c  1.3   11 months  jmcneill   branches: 1.3.2; 1.3.4; Add initial support for Allwinner A13 and R8 SoCs.
[TXT] sunxi_codec.c  1.5   4 months  bouyer   Remove sunxi_codec_drain(). It's optional, and as the DMA is not stopped at this...
[TXT] sunxi_codec.h  1.4   10 months  jmcneill   branches: 1.4.2; Add A31 audio codec support.
[TXT] sunxi_debe.c  1.9   2 months  bouyer   Defer display hardware reset to pipeline activation. This way, if we have a pipe...
[TXT] sunxi_debereg.h  1.1   4 months  bouyer   branches: 1.1.2; work in progress on porting graphics drivers from arm/allwinne...
[TXT] sunxi_dep.c  1.3   4 months  bouyer   Allow the graphic driver to be the kernel's console. Match either from the allwi...
[TXT] sunxi_display.h  1.3   2 months  bouyer   Defer display hardware reset to pipeline activation. This way, if we have a pipe...
[TXT] sunxi_emac.c  1.17   4 weeks  jmcneill   Print ethernet address at attach
[TXT] sunxi_emac.h  1.4   10 months  jmcneill   branches: 1.4.2; Disable poorly implemented tx interrupt mitigation code, fix c...
[TXT] sunxi_gates.c  1.1   13 months  jmcneill   branches: 1.1.4; 1.1.6; 1.1.8; Add misc. gates and resets driver, and explici...
[TXT] sunxi_gmac.c  1.2   10 months  jmcneill   branches: 1.2.2; Support snps,reset-gpio property and deassert optional stmmace...
[TXT] sunxi_gmacclk.c  1.1   10 months  jmcneill   branches: 1.1.2; Add support for sun6i/sun7i ethernet
[TXT] sunxi_gpio.c  1.21   2 months  jmcneill   sunxi_gpio_release: hold lock around call to sunxi_gpio_ctl
[TXT] sunxi_gpio.h  1.8   6 months  jmcneill   Add support for Allwinner H6 CPUX and CPUS port controllers.
[TXT] sunxi_hdmi.c  1.4   2 months  bouyer   Defer display hardware reset to pipeline activation. This way, if we have a pipe...
[TXT] sunxi_hdmireg.h  1.1   4 months  bouyer   branches: 1.1.2; work in progress on porting graphics drivers from arm/allwinne...
[TXT] sunxi_i2s.c  1.2   3 months  jmcneill   branches: 1.2.2; Set AUDIO_PROP_INDEPENDENT.
[TXT] sunxi_intc.c  1.3   9 months  jmcneill   branches: 1.3.2; Adjust irq mask/unmask along with enable/disable to make qemu ...
[TXT] sunxi_lradc.c  1.1   5 months  bouyer   branches: 1.1.2; fdt-ise the allwinner can and lradc drivers.
[TXT] sunxi_lradc.h  1.1   5 months  bouyer   branches: 1.1.2; fdt-ise the allwinner can and lradc drivers.
[TXT] sunxi_mmc.c  1.26   2 months  jmcneill   Revert "use len=0 for max length transfers" part of previous commit. PR: port-e...
[TXT] sunxi_mmc.h  1.3   11 months  jmcneill   branches: 1.3.2; Add support for sun50i new timing mode and calibration.
[TXT] sunxi_musb.c  1.5   4 months  jakllsch   Stop potential misuse of vendor names and USB vendor IDs in root hub device and ...
[TXT] sunxi_nand.c  1.5   9 months  jmcneill   branches: 1.5.2; Wait for irq instead of polling for cmd completion.
[TXT] sunxi_nmi.c  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner NMI / R_INTC interrupt controller.
[TXT] sunxi_platform.c  1.25   2 weeks  skrll   Add prefixes to struct arm_platform{,_info} members. No functional change.
[TXT] sunxi_platform.h  1.3   4 months  ryo   Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@) - sys/arch/evba...
[TXT] sunxi_pwm.c  1.2   5 weeks  christos   Add missing pointer <-> integer casts Use PRI?64 to print uint64_t instead 'll?'...
[TXT] sunxi_resets.c  1.1   13 months  jmcneill   branches: 1.1.4; 1.1.6; 1.1.8; Add misc. gates and resets driver, and explici...
[TXT] sunxi_rsb.c  1.5   5 weeks  christos   Add missing pointer <-> integer casts Use PRI?64 to print uint64_t instead 'll?'...
[TXT] sunxi_rsb.h  1.1   13 months  jmcneill   branches: 1.1.4; 1.1.6; 1.1.8; Add P2WI/RSB driver, based on awin_p2wi.c.
[TXT] sunxi_rtc.c  1.4   5 weeks  christos   Add missing pointer <-> integer casts Use PRI?64 to print uint64_t instead 'll?'...
[TXT] sunxi_sata.c  1.1   10 months  jmcneill   branches: 1.1.2; Add A10/A20 SATA support
[TXT] sunxi_sid.c  1.1   10 months  jmcneill   branches: 1.1.2; Add a simple Security ID EFUSE driver.
[TXT] sunxi_sid.h  1.1   10 months  jmcneill   branches: 1.1.2; export sunxi_sid_read_tscalib
[TXT] sunxi_sramc.c  1.1   10 months  jmcneill   branches: 1.1.2; Add driver for sun4i SRAM controller.
[TXT] sunxi_sramc.h  1.1   10 months  jmcneill   branches: 1.1.2; Add driver for sun4i SRAM controller.
[TXT] sunxi_tcon.c  1.7   2 months  bouyer   Defer display hardware reset to pipeline activation. This way, if we have a pipe...
[TXT] sunxi_tconreg.h  1.1   4 months  bouyer   branches: 1.1.2; work in progress on porting graphics drivers from arm/allwinne...
[TXT] sunxi_thermal.c  1.6   7 hours  bsiegert   Fix two typos in the Sunxi thermal driver. Noticed by rudolf in PR port-arm/535...
[TXT] sunxi_timer.c  1.3   8 months  jmcneill   Use Timer 2 instead of the 64-bit counter as a timecounter so we can use it in M...
[TXT] sunxi_ts.c  1.2   10 months  jmcneill   branches: 1.2.2; Add support for sun4i and sun6i, and enable temperature sensor...
[TXT] sunxi_twi.c  1.10   7 weeks  jmcneill   Use fdtbus_attach_i2cbus
[TXT] sunxi_usb3phy.c  1.1   3 months  jmcneill   branches: 1.1.2; Add driver for Allwinner USB3 PHY.
[TXT] sunxi_usbphy.c  1.11   6 months  jmcneill   Add support for H6 USB PHY
[TXT] sunxi_wdt.c  1.2   10 months  jmcneill   branches: 1.2.2; Add sun4i watchdog support.


CVSweb <webmaster@jp.NetBSD.org>