CVS log for src/sys/arch/arm/gemini/if_gpn.c

Up to [cvs.NetBSD.org] / src / sys / arch / arm / gemini

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

if_stats(9): Add ifp argument to if_stat..._ref.

This will enable us to pass the ifp through to a dtrace probe inside.

No functional change intended in this change, but this is an API
change visible to modules so it shouldn't be pulled up.

PR kern/58377

Fix potential null dereference by simply adding last_gd != NULL check
around the code block with last_gd usage after the inner loop.
It may mainly happen on bus_dmamap_load error.
Reported by Mootja _14, 2017.

Eliminate use of IFF_OACTIVE.

gpn_ifstart(): Replace "IF_DEQUEUE() -> IF_PREPEND() on failure" with
"IF_POLL() -> IF_DEQUEUE() on success".

Mostly merge changes from HEAD upto 20200411

Merge changes from current as of 20200406

Sync with head.

Adopt <net/if_stats.h>.

Pull up following revision(s) (requested by msaitoh in ticket #1427):

	sys/arch/arm/broadcom/bcm53xx_eth.c: revision 1.39
	sys/dev/pcmcia/if_xi.c: revision 1.91
	sys/dev/ic/aic6915.c: revision 1.40
	sys/dev/pci/if_tl.c: revision 1.117
	sys/arch/arm/gemini/gemini_gmac.c: revision 1.18
	sys/dev/ic/elinkxl.c: revision 1.133
	sys/dev/pci/if_ste.c: revision 1.57
	sys/dev/pci/if_alc.c: revision 1.43
	sys/dev/pci/if_stge.c: revision 1.72
	sys/dev/pci/if_ale.c: revision 1.34
	sys/dev/pci/if_age.c: revision 1.62
	sys/dev/pci/if_txp.c: revision 1.60
	sys/dev/ic/i82557.c: revision 1.156
	sys/dev/pci/if_vte.c: revision 1.27
	sys/arch/powerpc/booke/dev/pq3etsec.c: revision 1.47
	sys/arch/arm/gemini/if_gpn.c: revision 1.13

 if_percpuq(9) and ether_input() automatically increment if_ipackets, so don't add number of
RX frames from device's statistics counter to if_ipackets to avoid double
count.

Pull up following revision(s) (requested by msaitoh in ticket #403):

	sys/arch/arm/broadcom/bcm53xx_eth.c: revision 1.39
	sys/dev/pcmcia/if_xi.c: revision 1.91
	sys/dev/ic/aic6915.c: revision 1.40
	sys/dev/pci/if_tl.c: revision 1.117
	sys/arch/arm/gemini/gemini_gmac.c: revision 1.18
	sys/dev/ic/elinkxl.c: revision 1.133
	sys/dev/pci/if_ste.c: revision 1.57
	sys/dev/pci/if_alc.c: revision 1.43
	sys/dev/pci/if_stge.c: revision 1.72
	sys/dev/pci/if_ale.c: revision 1.34
	sys/dev/pci/if_age.c: revision 1.62
	sys/dev/pci/if_txp.c: revision 1.60
	sys/dev/ic/i82557.c: revision 1.156
	sys/dev/pci/if_vte.c: revision 1.27
	sys/arch/powerpc/booke/dev/pq3etsec.c: revision 1.47
	sys/arch/arm/gemini/if_gpn.c: revision 1.13

 if_percpuq(9) and ether_input() automatically increment if_ipackets, so don't add number of
RX frames from device's statistics counter to if_ipackets to avoid double
count.

 ether_input() automatically add input bytes to if_ibytes, so it's not
required to do in the driver who use ether_input().

Sync with HEAD

Even if we don't use MII(4), use the common path of SIOC[GS]IFMEDIA in
sys/net/if_ethersubr.c if we can.
 - Add ec_ifmedia into struct ethercom.
 - ec_mii in struct ethercom is kept and used as it is. It might be used in
   future. Note that some Ethernet drivers which _DOESN'T_ use mii(4) use
   ec_mii for keeping the if_media. Those should be changed in future.

 KNF. No functional change.

No functional change:
- u_int_{8,16,32}_t -> uint_{8,16,32}_t
- KNF.
- Tabify.
- Remove extra space.

Sync with HEAD

 Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.

 This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.

update from HEAD

Sync with HEAD

NULL deref, found by Mootja; not sure how to fix it, so just add a big XXX

Sync with HEAD

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input

The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
  - Where/When if_ipackets is counted up
  - Note that some drivers still update packet statistics in their own
    way (periodical update)
- Moved bpf_mtap run in softint
  - This makes it easy to MP-ify bpf

Proposed on tech-kern and tech-net

Sync with HEAD

Introduce m_set_rcvif and m_reset_rcvif

The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.

No functional change.

Sync with HEAD

Introduce softint-based if_input

This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.

This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.

To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.

Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html

Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!

#include <sys/bus.h> instead of <machine/bus.h>.

sync with head.

sync with head

Sync with HEAD.

Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.

sync with head

Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client.  This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached.  However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff.  ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.

sync with head.

Sync with HEAD.

Sync with HEAD.

file if_gpn.c was added on branch yamt-nfs-mp on 2009-05-04 08:10:41 +0000

file if_gpn.c was added on branch nick-hppapmap on 2009-01-19 13:15:58 +0000

file if_gpn.c was added on branch mjf-devfs2 on 2009-01-17 13:27:53 +0000

add gemini pseudo-nic and support code.