Annotation of src/sys/arch/amigappc/conf/NULL, Revision 1.1
1.1 ! is 1: # $NetBSD: AMIGA,v 1.22 1999/10/15 21:54:43 is Exp $
! 2: #
! 3: # This file was automatically created. Changes will be
! 4: # lost when running make in this directory.
! 5: #
! 6: # Created from:
! 7: #$ NetBSD: GENERIC,v 1.129 1999/10/15 21:50:34 is Exp $
! 8:
! 9: include "arch/amigappc/conf/std.amigappc"
! 10:
! 11: maxusers 8
! 12: options RTC_OFFSET=0
! 13:
! 14: #mainboards to support (in addition to Amiga)
! 15:
! 16: #options BB060STUPIDROM # You need this, if you have a non-DraCo
! 17: # MC68060 with an OS ROM up to (at least)
! 18: # V40 (OS3.1) and want to boot with the
! 19: # bootblock.
! 20: # You do not need this if you have a DraCo,
! 21: # have no 68060 or NEVER use the bootblock
! 22: #options P5PPC68KBOARD # Phase5 PPC/68K board support
! 23:
! 24: #processors this kernel should support
! 25:
! 26: options PPC604E
! 27: options PPC603E
! 28:
! 29: #options M68060 # support for 060
! 30: #options M060SP # MC68060 software support (Required for 060)
! 31:
! 32: #options M68040 # support for 040
! 33: #options FPSP # MC68040 floating point support
! 34: #options M68030 # support for 030
! 35: #options M68020 # support for 020/851
! 36: #options FPU_EMULATE # FPU emulation
! 37:
! 38: #Networking options
! 39:
! 40: #options INET # IP networking support (Required)
! 41: #options GATEWAY # Packet forwarding
! 42: #options DIRECTED_BROADCAST # Broadcast across subnets
! 43: #options MROUTING # Multicast routing
! 44: #options NS # XNS
! 45: #options NSIP # XNS tunneling over IP
! 46: #options ISO,TPIP # OSI
! 47: #options EON # OSI tunneling over IP
! 48: #options CCITT,LLC,HDLC # X.25
! 49: #options NETATALK # AppleTalk networking protocols
! 50: #options PPP_BSDCOMP # BSD-Compress compression support for PPP
! 51: #options PPP_DEFLATE # Deflate compression support for PPP
! 52: #options PPP_FILTER # Active filter support for PPP (requires bpf)
! 53: #options PFIL_HOOKS # pfil(9) packet filter hooks
! 54: #options IPFILTER_LOG # ipmon(8) log support
! 55:
! 56: file-system FFS # Berkeley fast file system
! 57: #file-system EXT2FS # second extended file system (linux)
! 58: #file-system LFS # log-structured filesystem (experimental)
! 59: #file-system MFS # Memory based filesystem
! 60: #file-system NFS # Network File System client side code
! 61: #file-system ADOSFS # AmigaDOS file system
! 62: #file-system CD9660 # ISO 9660 + Rock Ridge filesystem
! 63: #file-system MSDOSFS # MS-DOS filesystem
! 64: #file-system FDESC # user file descriptor filesystem
! 65: #file-system KERNFS # kernel data-structure filesystem
! 66: #file-system NULLFS # loopback filesystem
! 67: #file-system PORTAL # Portal filesystem
! 68: #file-system PROCFS # /proc filesystem
! 69: #file-system UMAPFS # NULLFS + uid and gid remapping
! 70: #file-system UNION # union filesystem
! 71:
! 72: #Filesystem options
! 73: #options QUOTA # User and group quotas in FFS
! 74: #options FFS_EI # FFS Endian Independant support
! 75: #options NFSSERVER # Network File System server side code
! 76: #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
! 77: # immutable) behave as system flags.
! 78:
! 79: #Compatability options for various existing systems
! 80:
! 81: #options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
! 82: #options COMPAT_43 # compatibility with 4.3BSD interfaces
! 83: #options COMPAT_09 # compatibility with NetBSD 0.9
! 84: #options COMPAT_10 # compatibility with NetBSD 1.0
! 85: #options COMPAT_12 # compatibility with NetBSD 1.2
! 86: #options COMPAT_13 # compatibility with NetBSD 1.3
! 87: #options COMPAT_14 # compatibility with NetBSD 1.4
! 88: #options COMPAT_SUNOS # Support to run Sun (m68k) executables
! 89: #options COMPAT_SVR4 # Support to run SVR4 (m68k) executables
! 90: #options COMPAT_NOMID # allow nonvalid machine id executables
! 91: #options COMPAT_LINUX # Support to run Linux/m68k executables
! 92: options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)
! 93:
! 94: #Support for System V IPC facilities.
! 95:
! 96: #options SYSVSHM # System V-like shared memory
! 97: #options SYSVMSG # System V-like messages
! 98: #options SYSVSEM # System V-like semaphores
! 99:
! 100: #Support for various kernel options
! 101:
! 102: #options KTRACE # system call tracing support
! 103: #options LKM # Loadable kernel modules
! 104: #options UCONSOLE # anyone can redirect a virtual console
! 105: #options INSECURE # allow, among other insecure stuff, LKM
! 106: # loading in multi-user mode.
! 107: #options SCSIVERBOSE # Verbose SCSI errors
! 108:
! 109: #options NTP # NTP phase/frequency locked loop
! 110:
! 111: #Misc. debugging options
! 112:
! 113: #options DDB # Kernel debugger
! 114: #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
! 115: #options DIAGNOSTIC # Extra kernel sanity checks
! 116: #options DEBUG # Enable misc. kernel debugging code
! 117: #options SYSCALL_DEBUG # debug all syscalls.
! 118: #options SCSIDEBUG # Add SCSI debugging statements
! 119: #options PANICBUTTON # Forced crash via keypress (???)
! 120:
! 121: #Amiga specific options
! 122:
! 123: #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
! 124: # first bank of RAM. (default: unlimited)
! 125: #options NKPTADD=4 # set this for 4 additional KPT pages
! 126: #options NKPTADDSHIFT=24 # set this for 1 additional KPT page
! 127: # per 16 MB (1<<24 bytes) of RAM
! 128: # define and decrease this, or define and
! 129: # increase NKPTADD if you get "out of PT pages"
! 130: # panics.
! 131:
! 132: #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
! 133: #before the 10 secondinterval ends, or that KBDRESET does work at all.
! 134: #options KBDRESET # sync on Ctrl-Amiga-Amiga
! 135:
! 136: #These options improve performance with the built-in serial port
! 137: #on slower Amigas. Try the larger buffers first then lev6_defer.
! 138: #options SERIBUF_SIZE=4096
! 139: #options SEROBUF_SIZE=32
! 140: #options LEV6_DEFER # defers l6 to l4 (below serial l5)
! 141:
! 142: #options RETINACONSOLE # enable code to allow retina to be console
! 143:
! 144: #options ULOWELLCONSOLE # enable code to allow a2410 to be console
! 145: #options CL5426CONSOLE # Cirrus console
! 146: #options CV64CONSOLE # CyberVision console
! 147: #options TSENGCONSOLE # Tseng console
! 148: #options CV3DCONSOLE # CyberVision 64/3D console
! 149:
! 150: #options GRF_ECS # Enhanced Chip Set
! 151: options GRF_NTSC # NTSC
! 152: options GRF_PAL # PAL
! 153: #options GRF_A2024 # Support for the A2024
! 154: options GRF_AGA # AGA Chip Set
! 155: options GRF_AGA_VGA # AGA VGAONLY timing
! 156: #options GRF_SUPER72 # AGA Super-72
! 157:
! 158: #options KFONT_8X11 # 8x11 font
! 159:
! 160: #This is how you would tell the kernel the A2410 oscillator frequencies:
! 161: #The used frequencies are the defaults, and do not need option setting
! 162: #options ULOWELL_OSC1=36000000
! 163: #options ULOWELL_OSC2=66667000
! 164:
! 165: #This is how you specify the blitting speed, higher values may speed up blits
! 166: #a littel bit. If you raise this value too much some trash may appear.
! 167: #the commented version is the default.
! 168: #options RH_MEMCLK=61000000
! 169: #this option enables the 64 bit sprite which does not work
! 170: #for quite a few people. E.g. The cursor sprite will turn to a block
! 171: #when moved to the top of the screen in X.
! 172: #options RH_64BIT_SPRITE
! 173: #enables fast scroll code appears to now work on 040 systems.
! 174: #options RETINA_SPEED_HACK
! 175: #enables the Hardwarecursor which does not work on some systems.
! 176: #options RH_HARDWARECURSOR
! 177:
! 178: grfcc0 at mainbus0 # custom chips
! 179: #grfrt0 at zbus0 # retina II
! 180: #grfrh0 at zbus0 # retina III
! 181: #grfcl* at zbus0 # Picasso II/Piccalo/Spectrum
! 182: #grful0 at zbus0 # A2410
! 183: #grfcv0 at zbus0 # CyberVision 64
! 184: #grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
! 185: #grfcv3d0 at zbus0 # CyberVision 64/3D
! 186:
! 187: grf0 at grfcc0
! 188: #grf1 at grfrt0
! 189: #grf2 at grfrh0
! 190: #grf3 at grfcl?
! 191: #grf4 at grful0
! 192: #grf5 at grfcv0
! 193: #grf6 at grfet?
! 194: #grf7 at grfcv3d0
! 195:
! 196: ite0 at grf0 # terminal emulators for grfs
! 197: #ite1 at grf1 # terminal emulators for grfs
! 198: #ite2 at grf2 # terminal emulators for grfs
! 199: #ite3 at grf3 # terminal emulators for grfs
! 200: #ite4 at grf4 # terminal emulators for grfs
! 201: #ite5 at grf5 # terminal emulators for grfs
! 202: #ite6 at grf6 # terminal emulators for grfs
! 203: #ite7 at grf7 # terminal emulators for grfs
! 204:
! 205: #msc0 at zbus0 # A2232 MSC multiport serial.
! 206: #mfc0 at zbus0 # MultiFaceCard I/O board
! 207: #mfcs0 at mfc0 unit 0 # MFC serial
! 208: #mfcs1 at mfc0 unit 1 # MFC serial
! 209: #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
! 210: #mfc1 at zbus0 # MultiFaceCard 2nd I/O board
! 211: #mfcs2 at mfc1 unit 0
! 212: #mfcs3 at mfc1 unit 1
! 213: #mfcp1 at mfc1 unit 0
! 214:
! 215: #hyper* at zbus? # zbus HyperCom3/3+/4/4+
! 216: #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
! 217: #com* at hyper? port ? # Hypercom3/4 serial ports
! 218: #lpt* at hyper? port ? # Hypercom3+/4+ parallel port
! 219:
! 220: #Amiga Mainboard devices (sans graphics and keyboard)
! 221:
! 222: #ser0 at mainbus0 # Amiga onboard serial
! 223: #par0 at mainbus0 # Amiga onboard parallel
! 224: ms* at mainbus0 # Amiga mice
! 225: #fdc0 at mainbus0 # Amiga FDC
! 226: #fd* at fdc0 unit ? # floppy disks on the later
! 227: a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
! 228: #a2kbbc0 at mainbus0 # A2000 battery backed clock
! 229: #aucc* at mainbus0 # Amiga CC audio
! 230: #audio* at aucc?
! 231:
! 232: #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
! 233:
! 234: #Alas, Melody-Z2 dont configure in the DraCo bus.
! 235: #melody* at zbus0 # Melody MPEG audio decoder
! 236: #audio* at melody?
! 237:
! 238: #Ethernet cards:
! 239: #le* at zbus0 # A2065, Ameristar, Ariadne
! 240: #ne* at zbus0 # AriadneII
! 241: #ed* at zbus0 # Hydra, ASDG LanRover
! 242: #es* at zbus0 # CEI A4066 EthernetPLUS
! 243: #qn* at zbus0 # Quicknet
! 244:
! 245: #bah* at zbus0 # C=/Ameristar A2060 / 560
! 246:
! 247: #Greater Valley Product Bus
! 248: #gvpbus* at zbus0
! 249:
! 250: #scsi stuff, all possible
! 251: #gtsc0 at gvpbus? # GVP series II scsi
! 252: #scsibus* at gtsc0
! 253: #ahsc0 at mainbus0 # A3000 scsi
! 254: #scsibus* at ahsc0
! 255: #atzsc0 at zbus0 # A2091 scsi
! 256: #scsibus* at atzsc0
! 257: #wstsc0 at zbus0 # Wordsync II scsi
! 258: #scsibus* at wstsc0
! 259: #ivsc0 at zbus0 # IVS scsi
! 260: #scsibus* at ivsc0
! 261: #mlhsc0 at zbus0 # Hacker scsi
! 262: #scsibus* at mlhsc0
! 263: #otgsc0 at zbus0 # 12 gauge scsi
! 264: #scsibus* at otgsc0
! 265: #zssc0 at zbus0 # Zeus scsi
! 266: #scsibus* at zssc0
! 267: #mgnsc0 at zbus0 # Magnum scsi
! 268: #scsibus* at mgnsc0
! 269: #wesc0 at zbus0 # Warp Engine scsi
! 270: #scsibus* at wesc0
! 271: #afsc0 at zbus0 # A4091 scsi
! 272: #scsibus* at afsc0
! 273: #aftsc0 at mainbus0 # A4000T scsi
! 274: #scsibus* at aftsc0
! 275: #flsc0 at zbus0 # FastlaneZ3 scsi
! 276: #scsibus* at flsc0
! 277: #bzsc0 at zbus0 # Blizzard 1230 I,II scsi
! 278: #scsibus* at bzsc0
! 279: #bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
! 280: #scsibus* at bzivsc0
! 281: #bztzsc0 at zbus0 # Blizzard 2060 scsi
! 282: #scsibus* at bztzsc0
! 283: #cbsc0 at zbus0 # CyberSCSI I
! 284: #scsibus* at cbsc0
! 285: #cbiisc0 at zbus0 # CyberSCSI II
! 286: #scsibus* at cbiisc0
! 287: #cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
! 288: #scsibus* at cbiiisc0
! 289: #empsc0 at zbus0 # Emplant scsi
! 290: #scsibus* at empsc0
! 291: #idesc0 at mainbus0 # A4000 & A1200 IDE
! 292: #scsibus* at idesc0
! 293:
! 294: #each hard drive from low target to high
! 295: #will configure to the next available sd unit number
! 296: #sd* at scsibus? target ? lun ? # scsi disks
! 297: #st* at scsibus? target ? lun ? # scsi tapes
! 298: #cd* at scsibus? target ? lun ? # scsi cds
! 299: #ss* at scsibus? target ? lun ? # scsi scanner
! 300: #ch* at scsibus? target ? lun ? # scsi autochangers
! 301: #uk* at scsibus? target ? lun ? # scsi unknown
! 302:
! 303: #pseudo-device loop # loopback network interface
! 304: #pseudo-device sl 1 # SLIP network interfaces
! 305: #pseudo-device ppp 1 # PPP network interfaces
! 306: #pseudo-device tun 1 # network tunnel line discipline
! 307: #pseudo-device gre 2 # generic L3 over IP tunnel
! 308: #pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
! 309: #pseudo-device bpfilter 16 # Berkeley packet filter
! 310: #pseudo-device ipfilter # IP Filter package
! 311:
! 312: pseudo-device view 4 # views (needed for grfcc)
! 313: pseudo-device pty 16 # pseudo ptys
! 314:
! 315: #pseudo-device vnd 4 # vnode pseudo-disks
! 316: #pseudo-device ccd 4 # concatenated disk devices
! 317: #pseudo-device raid 4 # RAIDframe disk driver
! 318:
! 319: #rnd is EXPERIMENTAL at this point.
! 320: #pseudo-device rnd # /dev/random and in-kernel generator
! 321: #options RND_COM # use "com" randomness as well (BROKEN)
! 322:
! 323: config netbsd root on ? type ?
CVSweb <webmaster@jp.NetBSD.org>