CVS log for src/sys/arch/alpha/pci/ttwoga.c

Up to [cvs.NetBSD.org] / src / sys / arch / alpha / pci

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Convert the Alpha port's bus_space back-end to manage address space
with vmem(9) arenas (using statically-allocated private boundary tags
for very early-in-boot) rather than extent(9).

As a side-effect, there's arguments to some initialization functions
that are no longer required, so garbage-collect those, update all the
call sites.

Merge thorpej-cfargs2.

Adapt to CFARGS().

Sync with HEAD.

Remove unnecessary #include <sys/malloc.h>

Don't use a bunch of switch() statements in the core logic drivers to select
the PCI interrupt initialization routine.  Instead, register said routines
by systype in a link set, and look them up and invoke them in a new function
alpha_pci_intr_init().

Sync with HEAD.

More symbol sanitizing.

Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
  actually needed.
- Don't be explicit about what interface attribute is attaching if
  the device only has one.  (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
  situations, making is visibly easier to see when indirect config is
  in play, and allowing for future change in semantics.  (As of now,
  this is just a wrapper around config_match(), but that is an
  implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance.  This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

config_found_ia() -> config_found() w/ CFARG_IATTR.

Convert config_found_ia() call sites where the device only carries
a single interface attribute to bare config_found() calls.

sync with head

merge to -current.

Do a minor cleanup of alpha (this will make applying pullups post branching
easier).
u_int{8,16,32,64}_t -> uint{*}_t
Change all old-style definitions to C89 prototypes.
Whitespace cleanup.
Constification in db_disasm.c

Catchup with rmind-uvmplock merge.

Major cleanup of alpha device drivers.
Switch to CFATTACH_DECL_NEW.
struct device * -> device_t
struct cfdata * -> cfdata_t
Use of device_xname.  No direct access to struct device members.
Use aprint* (not complete).

sync with head

CFATTACH_DECL(..., sizeof(struct device), -> CFATTACH_DECL_NEW(..., 0
struct device * -> device_t
struct cfdata * -> cfdata_t

Sync with HEAD.

sync with head

PCI_FLAGS_IO_ENABLED and PCI_FLAGS_MEM_ENABLED changed their functional
role in NetBSD (drivers are no longer supposed to write these to
pa_flags) without changing name.  Correct that.

Rename PCI_FLAGS_IO_ENABLED to PCI_FLAGS_IO_OKAY and
PCI_FLAGS_MEM_ENABLED to PCI_FLAGS_MEM_OKAY, thus making their names
consistent with the other PCI flags and poisoning 3rd-party driver
sources that use the flags in the old bad way.

This patch produces no binary changes in this set of PCI kernels when
they are compiled w/o 'options DIAGNOSTIC' and w/ -V MKREPRO=yes:

algor P4032 P5064 P6032
alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE
evbarm-el GUMSTIX HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321
evbarm-el IXDP425 IXM1200 KUROBOX_PRO
evbarm-el LUBBOCK MARVELL_NAS NAPPI NSLU2 SHEEVAPLUG SMDK2800 TEAMASA_NPWR
evbarm-el TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
evbppc OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
iyonix GENERIC
landisk GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sbmips-el GENERIC
sgimips GENERIC32_IP2x GENERIC32_IP3x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

Sync with HEAD.

sync with head.

sync with head.

Remove clause 3 and 4 from TNF licenses

merge ktrace-lwp.

Fix the sync with head I botched.

Sync with HEAD.

include "locators.h" explicitely (don't rely on isavar.h doing so)

Sync with HEAD

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

Handle 64bit DMA addresses on PCI for platforms that can (currently only
enabled on amd64). Add a dmat64 field to various PCI attach structures,
and pass it down where needed. Implement a simple new function called
pci_dma64_available(pa) to test if 64bit DMA addresses may be used.
This returns 1 iff _PCI_HAVE_DMA64 is defined in <machine/pci_machdep.h>,
and there is more than 4G of memory.

Sync with HEAD.

Use aprint_normal() for cfprint routines.

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

Use CFATTACH_DECL().

Declare all cfattach structures const.

Rather than referencing the cfdriver directly in the cfdata entries,
instead use a string naming the driver.  The cfdriver is then looked
up in a list which is built at run-time.

catch up with -current on kqueue branch

Catch up to -current.

Catch up with -current.

* Add "pcitag_t *pba_bridgetag" to pci_attach_args.  This is set to
  NULL for root PCI busses.  For busses behind a bridge, it points to
  a persistent copy of the bridge's pcitag_t.  This can be very useful
  for machine-dependent PCI bus enumeration code.
* Implement a machine-dependent pci_enumerate_bus() for sparc64 which
  uses OFW device nodes to enumerate the bus.  When a PCI bus that is
  behind a bridge is attached, pci_attach_hook() allocates a new PCI
  chipset tag for the new bus and sets it's "curnode" to the OFW node
  of the bridge.  This is used as a starting point when enumerating
  that bus.  Root busses get the OFW node of the host bridge (psycho).
* Garbage-collect "ofpci" and "ofppb" from the sparc64 port.

Sync with HEAD

file ttwoga.c was added on branch thorpej_scsipi on 2001-01-05 17:33:49 +0000

Add support for the AlphaServer 2100 (Sable) and the AlphaServer 2100A
(Lynx), written from scratch by me over a year ago, but never committed
to the tree because there was a bug I could never quite find.  I have
fixed a few problems in the code, but still don't know if that bug is
quite fixed.  Since I don't have access to the hardware directly, I'll
have to call for testers again.