CVS log for src/sys/arch/alpha/conf/INSTALL

Up to [cvs.NetBSD.org] / src / sys / arch / alpha / conf

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

Tidy up TLSB autoconfiguration just a bit.

Add the basic framework for the DEC KN7AA ("Ruby") systems -- DEC 7000
and DEC 10000.

This is a work-in-progress, but this should be sufficient for the system
to boot, using the PROM console routines (and then proceed to not find any
devices because we don't yet support the "Laser System Bus").

Sync with HEAD.

Use wildcard matches more consistently, and attach pci, eisa, isa, and
usb to their interface attributes, which makes for easier trimming-down
with "no" directives.

qemu device for INSTALL, too.

Enable MULTIPROCESSOR by default, but disable it in the RAMDISK
and INSTALL kernels to save some space.

Add siisata.

Merge changes from current as of 20200406

Slightly bump ramdisk space

Sync with head.

Retire "le* at pci?" from the shipped kernel configs:
- If the config had both an le@pci and a pcn, simply remove le@pci
  (pcn would match at a higher priority anyway).
- If the config had le@pci enabled, but no pcn, change le@pci to pcn.
- If the config had le@pci commented out, but no pcn, change le@pci
  to pcn and leave it commented out.

The pcn driver supports more chips than le@pci and does DMA directly
to/from mbufs rather than memory copies.

Remove FDDI support.

Sync with HEAD

Ssync with HEAD

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

update from HEAD

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
  since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
  many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Sync with HEAD

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Missing agp attachment.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Rebase to HEAD as of a few days ago.

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")

sync with head

Add raid to the install kernel

Add pseudo-device bpfilter to use DHCP client.

resync from head

remove confusing numeric locators where they are unused.

sync with head

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
  and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

sync with head

merge to -current.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself.  Move it to std.  This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports.  Thanks to Havard Eidnes for
pointing them out.

sync with head

Remove unused count from pseudo-device md.

sync with head.

sync with head

Sync with HEAD.

Remove unused count (invariably "4") from pseudo-device fss.

Sync with HEAD.

Commit is split, to avoid a "too many arguments" protocol error.

sync with head.

Sync with HEAD.

Remove kernfs and use dmesg(8) on alpha INSTALL kernel.

Sync with HEAD.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Sync with HEAD.

Sync with HEAD.

Sync with wrstuden-revivesa-base-2.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

Sync w/ -current. 34 merge conflicts to follow.

sync with head

Sync with HEAD.

Add options COMPAT_40 to files which have options COMPAT_30.

Catch up with now-somewhat-dated netbsd-4. These changes took longer
than expected for me to actually get around to merging.

Pull up revision 1.94 (requested by pavel in ticket #645).

sync the zstty configuration with GENERIC, for consistency.

sync with head.

Sync with head.

sync the zstty configuration with GENERIC, for consistency.

sync with head.

update comments on NFS_V2_ONLY after nqnfs removal.  no functional changes.
from Arnaud Lacombe.

Pull up following revision(s) (requested by tsutsui in ticket #282):
	sys/arch/alpha/conf/INSTALL: revision 1.91-1.92
	sys/arch/alpha/conf/GENERIC: revision 1.302-1.305
Add the following network devices:
- pcn at pci
- wm at pci
- makphy at mii
- rgephy at mii
- rlphy at mii
Reduce diffs between GENERIC and INSTALL.

sync with head.

Reduce diffs between GENERIC and INSTALL.

sync with head.

Add the following network devices:
- pcn at pci
- wm at pci
- makphy at mii
- rgephy at mii
- rlphy at mii

Sync with head.

sync with head

remove MALLOC_NOINLINE, it doesn't do anything anymore.

sync with head

sync with head.

Sync with head.

sync with head.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

Sync with head.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Sync with HEAD. Here we go again...

Pull up revision 1.86 (requested by tron in ticket #362):
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

sync with -current

Pull up revision 1.82 (requested by bouyer in ticket #1019):
  Add pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) series of
  controllers.

sync with head.  xen and whitespace.  xen part is not finished.

Sync with HEAD.

Hi Perry!

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Sync with HEAD.

sync with head.

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Sync with HEAD.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
  have a disk.  Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sync with HEAD.

pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Sync with HEAD.

Add COMPAT_BSDPTY to the rest of the config files.

Fix the sync with head I botched.

Sync with HEAD.

Sync with HEAD

Pull up revision 1.80 (requested by atatat in ticket #663):
	Add "options SYSCTL_INCLUDE_DESCR" to a lot of configurations,
	but commented out in most of them.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

RealTek -> Realtek.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Use one  'atabus* at ata?'  instead of multiple  'atabus* at FOOide?  channel ?'
Use  'atapibus* at atapi?'  instead of  'atapibus* at atabus?'

Add new per-chip pciide drivers.

Add atabus

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more.  see tech-security

Add mpt(4).

Bye Bye UCONSOLE

add wi at pci and pcmcia, make comments consistent.

Sync with HEAD.

White space police.

Catch up to -current.

sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work

Remove the TCWSCONS config now that zstty can do flow control on IOASIC
machines.

enable USERCONF by default; it's small and extremely useful to have available.

sync kqueue branch with HEAD

catch up with -current.

Catch up to -current.

Correct some commented out variables from ADW_DISABLE_* to SCSI_ADW_DISABLE_*.
From Julio Merino in port-alpha/17677.

catch up with -current.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

catch up with -current on kqueue branch

Catch up to -current.

Add the INCLUDE_CONFIG_FILE option to all config files.  In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Switch from de to tlp by default.

Catch up to -current.

Add commented-out USERCONF option.  Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Catch up to -current.
(CVS: It's not just a program. It's an adventure!)

Catch up with -current.

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
  are now consistently named
* fold opt_mdsize.h into opt_md.h

Catch up to -current.

Sync w/ -current.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Sync kqueue branch with -current.

Catch up to -current.

Apply patch (requested by he):
  Add Mylex DACC960 (mlx), change ca* to ld*.

cleanup:
	options SPACE TAB
	makeoptions TAB
	psuedo-device TAB
	remove trailing whitespace
	replace multiple spaces -> tabs
	options "FOO" -> options FOO
	options "FOO=bar" -> options FOO=bar
	options "FOO=\"bar\"" -> options FOO="\"bar\""

Merge Aug 24 -current into the kqueue branch.

file INSTALL was added on branch nathanw_sa on 2002-01-08 00:22:53 +0000

More comment changes: 90x[B] -> 90x[BC]

Remove (commented out) ncr* at pci? lines.

Catch up to -current.

Add sf(4), gsip(4), gphyter(4) drivers.

add iha(4); it works in my pc164 after thorpej fixed a minor issue

Add mlx at eisa.

Sync with HEAD.

Correct typo (s/unit/unix/).

Sync with HEAD.

Add a driver for the Mylex DAC960 family (including DEC SWXCR).

Sync with HEAD

Add Sable and Lynx support.

Sync with HEAD.

lsu -> ld, by popular request.

Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.

ca -> lsu

Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device  pty             2       # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options        VNODE_OP_NOINLINE       # Don't inline vnode op calls
#options        NFS_V2_ONLY             # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Back out part of previous which was unintended.

Pullup from trunk:
Add depca at eisa.

Add depca at eisa.

Update from trunk:
- Add Jensen support/devices.
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.

- Add Jensen support/devices.
- Add commented-out Sable/Lynx support/devices.
- Switch from `ncr' to `siop' by default.
- Add some missing `scsibus' configs to INSTALL.

Sync w/ netbsd-1-5-base.

Add support for the Alpha Processor, Inc. UP1000 EV6 system.

Note that KN300 is also for AlphaServer 1200.

Add (sometimes commented out) MIIVERBOSE option.

Attach cac* and ca*.

rl -> rtk

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

Pull up to last week's -current.

bring in latest KAME (as of 19991130, KAME/NetBSD141) into kame branch
just for reference purposes.
This commit includes 1.4 -> 1.4.1 sync for kame branch.

The branch does not compile at all (due to the lack of ALTQ and some other
source code).  Please do not try to modify the branch, this is just for
referenre purposes.

synchronization to latest KAME will take place on HEAD branch soon.

Add entries for we[01] (configured as for the i386 GENERIC) to enable
WD/SMC ISA ethernet cards to be used for installation and setup.

Add WDTR, SDTR and TAGQ disable options

Sync with -current.

Add some missing Ethernet cards: rl, ti (not in INSTALL), sip, tlp.

file INSTALL was added on branch comdex-fall-1999 on 1999-11-05 21:30:22 +0000

Add some missing Ethernet cards: rl, ti (not in INSTALL), sip, tlp.

Entries for dpt(4).

Add the AdvanSys SCSI boards.

Update from trunk.

It's time to be COMPAT_14.

pullup 1.26->1.27 (ross)

Sync w/ -current.

Turn on EV6 bits: Tsunami and system type 6600.

Add missing phy's. Increase miniroot size

add vr* at pci?, sort

Sync w/ -current.

pullup 1.23->1.24 (ross)

WSEMUL_SUN -> WSEMUL_VT100

PCI:	+bha
	+en
	+ex
	+fxp
	+le
	+pcscp
MII:	+exphy
EISA:	+ahb
	+uha

Add floppy controller and drives.

ne* at pci? ...

second round of mouse renaming: psm->pms

Sync with new IDE support (e.g. pciide changes)

Adapt to MII changes.

remove options FIFO; it's now the default

Add DEC_550 (Miata).

Add epic* at pci?

- Change the tcds child locator from "slot" to "chip", making it look less
  like a TurboChannel locator, and more like what is actually going on.
- Allow tcds and asc children of tcds to be cloned.

No need to hard-code the mcclock offset on the gbus; gbus is direct-config.

Whitespace sanity.

Add PCI IDE.

convert to new wscons
(pcppi->pckbc, pms->psm, wscons->wsdisplay)

1. Always link at the high address, now that we can use free ram below
the kernel on most platforms, including all of the entry-level platforms.
2. Kill the comments and options for load address selection.
3. Kill the default -g.

Use NFS_BOOT_DHCP rather than NFS_BOOT_BOOTP.  The former is more
flexible, and the boot blocks use DHCP already(!!!) and it'd be good
for the kernel to be consistent with them.

Bump the ramdisk size to 3M.

le* at isa? isn't ready for prime-time yet.

Switch to MI IDE drivers, add ATAPI devices.

Make INSTALL a fully-loaded kernel (for booting from network or CD), and
INSTALL-FLOPPY a stripped-down version to fit on a floppy.

Add (commented out) COMPAT_13

Add kernfs; remove more stuff we don't need.

First go at an INSTALL kernel (add ramdisk, remove unnecessary stuff).