[BACK]Return to Makefile CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / sys

File: [cvs.NetBSD.org] / src / sys / Makefile (download)

Revision 1.80, Sat May 27 21:02:55 2017 UTC (7 months, 3 weeks ago) by bouyer
Branch: MAIN
CVS Tags: tls-maxphys-base-20171202, perseant-stdc-iso10646-base, perseant-stdc-iso10646, nick-nhusb-base-20170825, netbsd-8-base, netbsd-8, matt-nb8-mediatek-base, matt-nb8-mediatek, HEAD
Changes since 1.79: +2 -2 lines

merge the bouyer-socketcan branch to HEAD.

CAN stands for Controller Area Network, a broadcast network used
in automation and automotive fields. For example, the NMEA2000 standard
developped for marine devices uses a CAN network as the link layer.

This is an implementation of the linux socketcan API:
you can also see can(4).

This adds a new socket family (AF_CAN) and protocol (PF_CAN),
as well as the canconfig(8) utility, used to set timing parameter of
CAN hardware. Also inclued is a driver for the CAN controller
found in the allwinner A20 SoC (I tested it with an Olimex lime2 board,
connected with PIC18-based CAN devices).

There is also the canloop(4) pseudo-device, which allows to use
the socketcan API without CAN hardware.

At this time the CANFD part of the linux socketcan API is not implemented.
Error frames are not implemented either. But I could get the cansend and
canreceive utilities from the canutils package to build and run with minimal
changes. tcpudmp(8) can also be used to record frames, which can be
decoded with etherreal.

#	$NetBSD: Makefile,v 1.80 2017/05/27 21:02:55 bouyer Exp $

.include <bsd.own.mk>

SUBDIR=	altq arch compat dev fs miscfs \
	net net80211 netatalk netbt netcan netipsec netinet netinet6 \
        netisdn netkey netmpls netnatm netsmb \
	nfs opencrypto sys ufs uvm

# interrupt implementation depends on the kernel within the port
#.if (${MACHINE} != "evbppc")
.if make(obj) || make(cleandir) || ${MKKMOD} != "no"

.if make(includes) || make(obj) || make(cleandir)
SUBDIR+= rump

.include <bsd.kinc.mk>