[BACK]Return to sysctl.7 CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / share / man / man7

Annotation of src/share/man/man7/sysctl.7, Revision 1.97

1.97    ! wiz         1: .\"    $NetBSD: sysctl.7,v 1.96 2015/12/13 14:28:12 christos Exp $
1.1       pavel       2: .\"
                      3: .\" Copyright (c) 1993
                      4: .\"    The Regents of the University of California.  All rights reserved.
                      5: .\"
                      6: .\" Redistribution and use in source and binary forms, with or without
                      7: .\" modification, are permitted provided that the following conditions
                      8: .\" are met:
                      9: .\" 1. Redistributions of source code must retain the above copyright
                     10: .\"    notice, this list of conditions and the following disclaimer.
                     11: .\" 2. Redistributions in binary form must reproduce the above copyright
                     12: .\"    notice, this list of conditions and the following disclaimer in the
                     13: .\"    documentation and/or other materials provided with the distribution.
                     14: .\" 3. Neither the name of the University nor the names of its contributors
                     15: .\"    may be used to endorse or promote products derived from this software
                     16: .\"    without specific prior written permission.
                     17: .\"
                     18: .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
                     19: .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
                     20: .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
                     21: .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
                     22: .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
                     23: .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
                     24: .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
                     25: .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
                     26: .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
                     27: .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
                     28: .\" SUCH DAMAGE.
                     29: .\"
                     30: .\"    @(#)sysctl.3    8.4 (Berkeley) 5/9/95
                     31: .\"
1.97    ! wiz        32: .Dd December 13, 2015
1.1       pavel      33: .Dt SYSCTL 7
                     34: .Os
                     35: .Sh NAME
                     36: .Nm sysctl
                     37: .Nd system information variables
                     38: .Sh DESCRIPTION
                     39: The
                     40: .Xr sysctl 3
                     41: library function and the
                     42: .Xr sysctl 8
                     43: utility are used to get and set values of system variables, maintained
                     44: by the kernel.
                     45: The variables are organized in a tree and identified by a sequence of
                     46: numbers, conventionally separated by dots with the topmost identifier
                     47: at the left side.
                     48: The numbers have corresponding text names.
                     49: The
                     50: .Xr sysctlnametomib 3
                     51: function or the
                     52: .Fl M
                     53: argument to the
                     54: .Xr sysctl 8
                     55: utility can be used to convert the text representation to the
                     56: numeric one.
                     57: .Pp
                     58: The individual sysctl variables are described below, both the textual
                     59: and numeric form where applicable.
                     60: The textual names can be used as argument to the
                     61: .Xr sysctl 8
                     62: utility and in the file
                     63: .Pa /etc/sysctl.conf .
                     64: The numeric names are usually defined as preprocessor constants and
                     65: are intended for use by programs.
                     66: Every such constant expands to one integer, which identifies the
                     67: sysctl variable relative to the upper level of the tree.
                     68: See the
                     69: .Xr sysctl 3
                     70: manual page for programming examples.
1.50      jruoho     71: .Ss Top level names
1.56      uwe        72: The top level names are defined with a
                     73: .Va CTL_
                     74: prefix in
1.33      joerg      75: .In sys/sysctl.h ,
1.1       pavel      76: and are as follows.
                     77: The next and subsequent levels down are found in the include files
                     78: listed here, and described in separate sections below.
1.56      uwe        79: .Bl -column "security" ".Dv CTL_SECURITY" ".In uvm/uvm_param.h" "High kernel limits"
                     80: .It Sy Name  Ta Sy Constant     Ta Sy Next level names Ta Sy Description
                     81: .It kern     Ta Dv CTL_KERN     Ta In sys/sysctl.h     Ta High kernel limits
                     82: .It vm       Ta Dv CTL_VM       Ta In uvm/uvm_param.h  Ta Virtual memory
                     83: .It vfs      Ta Dv CTL_VFS      Ta In sys/mount.h      Ta Filesystem
                     84: .It net      Ta Dv CTL_NET      Ta In sys/socket.h     Ta Networking
                     85: .It debug    Ta Dv CTL_DEBUG    Ta In sys/sysctl.h     Ta Debugging
                     86: .It hw       Ta Dv CTL_HW       Ta In sys/sysctl.h     Ta Generic CPU, I/O
                     87: .It machdep  Ta Dv CTL_MACHDEP  Ta In sys/sysctl.h     Ta Machine dependent
                     88: .It user     Ta Dv CTL_USER     Ta In sys/sysctl.h     Ta User-level
                     89: .It ddb      Ta Dv CTL_DDB      Ta In sys/sysctl.h     Ta In-kernel debugger
                     90: .It proc     Ta Dv CTL_PROC     Ta In sys/sysctl.h     Ta Per-process
                     91: .It vendor   Ta Dv CTL_VENDOR   Ta ?                   Ta Vendor specific
                     92: .It emul     Ta Dv CTL_EMUL     Ta In sys/sysctl.h     Ta Emulation settings
                     93: .It security Ta Dv CTL_SECURITY Ta In sys/sysctl.h     Ta Security settings
1.1       pavel      94: .El
1.50      jruoho     95: .Ss The debug.* subtree
1.1       pavel      96: The debugging variables vary from system to system.
                     97: A debugging variable may be added or deleted without need to recompile
                     98: .Nm
                     99: to know about it.
                    100: Each time it runs,
                    101: .Nm
                    102: gets the list of debugging variables from the kernel and
                    103: displays their current values.
                    104: The system defines twenty
1.56      uwe       105: .Vt ( struct ctldebug )
1.1       pavel     106: variables named
                    107: .Dv debug0
                    108: through
                    109: .Dv debug19 .
                    110: They are declared as separate variables so that they can be
                    111: individually initialized at the location of their associated variable.
                    112: The loader prevents multiple use of the same variable by issuing errors
                    113: if a variable is initialized in more than one place.
                    114: For example, to export the variable
1.56      uwe       115: .Va dospecialcheck
1.1       pavel     116: as a debugging variable, the following declaration would be used:
1.43      jruoho    117: .Pp
1.1       pavel     118: .Bd -literal -offset indent -compact
                    119: int dospecialcheck = 1;
                    120: struct ctldebug debug5 = { "dospecialcheck", \*[Am]dospecialcheck };
                    121: .Ed
                    122: .Pp
                    123: Note that the dynamic implementation of
                    124: .Nm
                    125: currently in use largely makes this particular
                    126: .Nm
                    127: interface obsolete.
                    128: See
                    129: .Xr sysctl 8
                    130: .\" and
                    131: .\" .Xr sysctl 9
                    132: for more information.
1.50      jruoho    133: .Ss The vfs.* subtree
1.1       pavel     134: A distinguished second level name,
1.91      kamil     135: .Li vfs.generic ( Dv VFS_GENERIC ) ,
1.57      wiz       136: is used to get general information about all file systems.
1.26      elad      137: It has the following third level identifiers:
1.56      uwe       138: .Bl -tag -width "123456"
1.91      kamil     139: .It Li vfs.generic.maxtypenum ( Dv VFS_MAXTYPENUM )
1.57      wiz       140: The highest valid file system type number.
1.91      kamil     141: .It Li vfs.generic.conf ( Dv VFS_CONF )
1.57      wiz       142: Returns configuration information about the file system type given as a fourth
1.26      elad      143: level identifier.
1.91      kamil     144: .It Li vfs.generic.usermount ( Dv VFS_USERMOUNT )
1.68      jym       145: Determines if non superuser mounts are allowed, defaults to
1.59      christos  146: .Dv 0 .
1.91      kamil     147: .It Li vfs.generic.magiclinks ( Dv VFS_MAGICLINKS )
1.59      christos  148: Controls if expansion of variables is going to be performed on pathnames
                    149: or not.
                    150: Defaults to no variable expansion,
                    151: .Dv 0 .
                    152: Variables are of the form
                    153: .Li @name
1.60      christos  154: and the variables supported are described in
                    155: .Xr symlink 7
                    156: under
                    157: .Dq "MAGIC SYMLINKS" .
1.26      elad      158: .El
                    159: .Pp
1.54      christos  160: A second level name for controlling the
                    161: .Xr wapbl 4
                    162: (Write Ahead Physical Block Logging file system journalling)
                    163: capabilities with the following third level identifiers:
1.56      uwe       164: .Bl -tag -width "123456"
                    165: .It Li vfs.wapbl.flush_disk_cache
1.55      wiz       166: Controls whether to attempt to flush the disk cache on each commit.
1.77      apb       167: It defaults to 1 and it should always be on to ensure integrity
                    168: of file system metadata in the event of a power loss.
1.54      christos  169: For slow disks, turning it off can improve performance.
1.56      uwe       170: .It Li vfs.wapbl.verbose_commit
1.55      wiz       171: For each transaction log commit, print the number of bytes written
                    172: and the time it took to commit as seconds.nanoseconds.
1.54      christos  173: .El
                    174: .Pp
1.57      wiz       175: The remaining second level identifiers are the file system names, identified
1.26      elad      176: by the type number returned by a
1.1       pavel     177: .Xr statvfs 2
                    178: call or from
1.27      wiz       179: .Li vfs.generic.conf .
1.56      uwe       180: .Pp
1.57      wiz       181: The third level identifiers available for each file system
1.1       pavel     182: are given in the header file that defines the mount
1.57      wiz       183: argument structure for that file system.
1.50      jruoho    184: .Ss The hw.* subtree
1.1       pavel     185: The string and integer information available for the
                    186: .Li hw
                    187: level is detailed below.
                    188: The changeable column shows whether a process with appropriate
                    189: privilege may change the value.
1.37      jruoho    190: .Bl -column "hw.machine_arch" "integer" "Changeable" -offset indent
1.92      wiz       191: .It Sy Second level name       Sy Type Sy Changeable
1.1       pavel     192: .It hw.alignbytes      integer no
                    193: .It hw.byteorder       integer no
                    194: .It hw.cnmagic string  yes
                    195: .It hw.disknames       string  no
                    196: .It hw.diskstats       struct  no
                    197: .It hw.machine string  no
                    198: .It hw.machine_arch    string  no
                    199: .It hw.model   string  no
                    200: .It hw.ncpu    integer no
1.84      njoly     201: .It hw.ncpuonline      integer no
1.1       pavel     202: .It hw.pagesize        integer no
                    203: .It hw.physmem integer no
                    204: .It hw.physmem64       quad    no
                    205: .It hw.usermem integer no
                    206: .It hw.usermem64       quad    no
                    207: .El
                    208: .Bl -tag -width "123456"
1.91      kamil     209: .It Li hw.alignbytes ( Dv HW_ALIGNBYTES )
1.1       pavel     210: Alignment constraint for all possible data types.
                    211: This shows the value
                    212: .Dv ALIGNBYTES
                    213: in
1.56      uwe       214: .In machine/param.h ,
1.1       pavel     215: at the kernel compilation time.
1.91      kamil     216: .It Li hw.byteorder ( Dv HW_BYTEORDER )
1.56      uwe       217: The byteorder (4321, or 1234).
1.91      kamil     218: .It Li hw.cnmagic ( Dv HW_CNMAGIC )
1.1       pavel     219: The console magic key sequence.
1.91      kamil     220: .It Li hw.disknames ( Dv HW_DISKNAMES )
1.1       pavel     221: The list of (space separated) disk device names on the system.
1.91      kamil     222: .It Li hw.iostatnames ( Dv HW_IOSTATNAMES )
1.1       pavel     223: A space separated list of devices that will have I/O statistics
                    224: collected on them.
1.91      kamil     225: .It Li hw.iostats ( Dv HW_IOSTATS )
1.1       pavel     226: Return statistical information on the NFS mounts, disk and tape
                    227: devices on the system.
                    228: An array of
1.56      uwe       229: .Vt struct io_sysctl
1.1       pavel     230: structures is returned,
                    231: whose size depends on the current number of such objects in the system.
                    232: The third level name is the size of the
1.56      uwe       233: .Vt struct io_sysctl .
1.1       pavel     234: The type of object can be determined by examining the
                    235: .Va type
                    236: element of
1.56      uwe       237: .Vt struct io_sysctl .
1.1       pavel     238: Which can be
                    239: .Dv IOSTAT_DISK
                    240: (disk drive),
                    241: .Dv IOSTAT_TAPE
                    242: (tape drive), or
                    243: .Dv IOSTAT_NFS
                    244: (NFS mount).
1.91      kamil     245: .It Li hw.machine ( Dv HW_MACHINE )
1.1       pavel     246: The machine class.
1.91      kamil     247: .It Li hw.machine_arch ( Dv HW_MACHINE_ARCH )
1.1       pavel     248: The machine CPU class.
1.91      kamil     249: .It Li hw.model ( Dv HW_MODEL )
1.1       pavel     250: The machine model.
1.91      kamil     251: .It Li hw.ncpu ( Dv HW_NCPU )
1.84      njoly     252: The number of CPUs configured.
1.91      kamil     253: .It Li hw.ncpuonline ( Dv HW_NCPUONLINE )
1.84      njoly     254: The number of CPUs online.
1.91      kamil     255: .It Li hw.pagesize ( Dv HW_PAGESIZE )
1.1       pavel     256: The software page size.
1.91      kamil     257: .It Li hw.physmem ( Dv HW_PHYSMEM )
1.1       pavel     258: The bytes of physical memory as a 32-bit integer.
1.91      kamil     259: .It Li hw.physmem64 ( Dv HW_PHYSMEM64 )
1.1       pavel     260: The bytes of physical memory as a 64-bit integer.
1.91      kamil     261: .It Li hw.usermem ( Dv HW_USERMEM )
1.1       pavel     262: The bytes of non-kernel memory as a 32-bit integer.
1.91      kamil     263: .It Li hw.usermem64 ( Dv HW_USERMEM64 )
1.1       pavel     264: The bytes of non-kernel memory as a 64-bit integer.
                    265: .El
1.50      jruoho    266: .Ss The kern.* subtree
1.43      jruoho    267: This subtree includes data generally related to the kernel.
1.1       pavel     268: The string and integer information available for the
                    269: .Li kern
                    270: level is detailed below.
                    271: The changeable column shows whether a process with appropriate
                    272: privilege may change the value.
1.43      jruoho    273: .Bl -column "kern.posix_reader_writer_locks" \
                    274: "struct kinfo_drivers" "not applicable"
1.92      wiz       275: .It Sy Second level name       Sy Type Sy Changeable
1.51      jruoho    276: .It kern.aio_listio_max        integer yes
                    277: .It kern.aio_max       integer yes
1.44      jruoho    278: .It kern.arandom       integer no
1.1       pavel     279: .It kern.argmax        integer no
1.39      jruoho    280: .It kern.boothowto     integer no
1.1       pavel     281: .It kern.boottime      struct timeval  no
1.85      apb       282: .It kern.buildinfo     string  no
1.39      jruoho    283: .\".It kern.bufq       node    not applicable
1.1       pavel     284: .It kern.ccpu  integer no
                    285: .It kern.clockrate     struct clockinfo        no
                    286: .It kern.consdev       integer no
1.39      jruoho    287: .It kern.coredump      node    not applicable
1.21      joerg     288: .It kern.cp_id struct  no
                    289: .It kern.cp_time       uint64_t[\|]    no
1.46      jruoho    290: .It kern.cryptodevallowsoft    integer yes
1.1       pavel     291: .It kern.defcorename   string  yes
1.38      jruoho    292: .It kern.detachall     integer yes
1.1       pavel     293: .It kern.domainname    string  yes
                    294: .It kern.drivers       struct kinfo_drivers    no
1.39      jruoho    295: .It kern.dump_on_panic integer yes
1.1       pavel     296: .It kern.file  struct file     no
                    297: .It kern.forkfsleep    integer yes
                    298: .It kern.fscale        integer no
                    299: .It kern.fsync integer no
1.21      joerg     300: .It kern.hardclock_ticks       integer no
1.1       pavel     301: .It kern.hostid        integer yes
                    302: .It kern.hostname      string  yes
1.21      joerg     303: .It kern.iov_max       integer no
1.39      jruoho    304: .It kern.ipc   node    not applicable
1.21      joerg     305: .It kern.job_control   integer no
1.1       pavel     306: .It kern.labeloffset   integer no
                    307: .It kern.labelsector   integer no
1.21      joerg     308: .It kern.login_name_max        integer no
1.1       pavel     309: .It kern.logsigexit    integer yes
1.21      joerg     310: .It kern.mapped_files  integer no
1.1       pavel     311: .It kern.maxfiles      integer yes
1.70      christos  312: .It kern.maxlwp        integer yes
1.1       pavel     313: .It kern.maxpartitions integer no
                    314: .It kern.maxphys       integer no
                    315: .It kern.maxproc       integer yes
                    316: .It kern.maxptys       integer yes
                    317: .It kern.maxvnodes     integer yes
                    318: .It kern.mbuf  node    not applicable
                    319: .It kern.memlock       integer no
1.21      joerg     320: .It kern.memlock_range integer no
                    321: .It kern.memory_protection     integer no
1.42      jruoho    322: .It kern.module        node    not applicable
1.21      joerg     323: .It kern.monotonic_clock       integer no
1.49      jruoho    324: .It kern.mqueue        node    not applicable
1.1       pavel     325: .It kern.msgbuf        integer no
                    326: .It kern.msgbufsize    integer no
                    327: .It kern.ngroups       integer no
1.41      jruoho    328: .\".It kern.no_sa_support      integer yes
1.1       pavel     329: .It kern.ntptime       struct ntptimeval       no
                    330: .It kern.osrelease     string  no
1.39      jruoho    331: .It kern.osrevision    integer no
1.1       pavel     332: .It kern.ostype        string  no
1.41      jruoho    333: .\".It kern.panic_now  integer yes
1.1       pavel     334: .It kern.pipe  node    not applicable
1.82      joerg     335: .It kern.pool  struct pool_sysctl      no
1.39      jruoho    336: .\" .It kern.posix     node    not applicable
                    337: .It kern.posix1version integer no
1.51      jruoho    338: .It kern.posix_aio     integer no
1.21      joerg     339: .It kern.posix_barriers        integer no
                    340: .It kern.posix_reader_writer_locks     integer no
1.39      jruoho    341: .\".It kern.posix_sched        integer yes
1.21      joerg     342: .It kern.posix_semaphores      integer no
                    343: .It kern.posix_spin_locks      integer no
                    344: .It kern.posix_threads integer no
                    345: .It kern.posix_timers  integer no
1.1       pavel     346: .It kern.proc  struct kinfo_proc       no
                    347: .It kern.proc2 struct kinfo_proc2      no
1.21      joerg     348: .It kern.proc_args     string  no
1.39      jruoho    349: .It kern.profiling     node    not applicable
1.41      jruoho    350: .\".It kern.pset       node    not applicable
1.1       pavel     351: .It kern.rawpartition  integer no
1.21      joerg     352: .It kern.root_device   string  no
                    353: .It kern.root_partition        integer no
                    354: .It kern.rtc_offset    integer yes
                    355: .It kern.saved_ids     integer no
1.39      jruoho    356: .It kern.sbmax integer yes
1.41      jruoho    357: .\".It kern.sched      node    not applicable
1.1       pavel     358: .It kern.securelevel   integer raise only
1.39      jruoho    359: .It kern.somaxkva      integer yes
1.21      joerg     360: .It kern.synchronized_io       integer no
1.19      christos  361: .It kern.timecounter   node    not applicable
1.1       pavel     362: .It kern.timex struct  no
                    363: .It kern.tkstat        node    not applicable
1.66      christos  364: .It kern.tty   node    not applicable
1.1       pavel     365: .It kern.urandom       integer no
1.45      jruoho    366: .It kern.usercrypto    integer yes
                    367: .It kern.userasymcrypto        integer yes
1.39      jruoho    368: .It kern.veriexec      node    not applicable
1.1       pavel     369: .It kern.version       string  no
                    370: .It kern.vnode struct vnode    no
                    371: .El
                    372: .Bl -tag -width "123456"
1.51      jruoho    373: .It Li kern.aio_listio_max
                    374: The maximum number of asynchronous
                    375: .Tn I/O
                    376: operations in a single list I/O call.
                    377: Like with all variables related to
                    378: .Xr aio 3 ,
                    379: the variable may be created and removed dynamically
                    380: upon loading or unloading the corresponding kernel module.
                    381: .It Li kern.aio_max
                    382: The maximum number of asynchronous I/O operations.
1.44      jruoho    383: .It Li kern.arandom
                    384: This variable picks a random number each time it is queried.
                    385: The used random number generator
1.56      uwe       386: .Pf ( Tn RNG )
1.44      jruoho    387: is based on
                    388: .Xr arc4random 3 .
1.91      kamil     389: .It Li kern.argmax ( Dv KERN_ARGMAX )
1.1       pavel     390: The maximum bytes of argument to
                    391: .Xr execve 2 .
1.23      apb       392: .It Li kern.boothowto
                    393: Flags passed from the boot loader; see
                    394: .Xr reboot 2
                    395: for the meanings of the flags.
1.91      kamil     396: .It Li kern.boottime ( Dv KERN_BOOTTIME )
1.1       pavel     397: A
1.56      uwe       398: .Vt struct timeval
1.1       pavel     399: structure is returned.
                    400: This structure contains the time that the system was booted.
1.85      apb       401: .It Li kern.buildinfo
                    402: When the kernel is built, the build environment may optionally provide
                    403: arbitrary information to be stored in this variable.
1.41      jruoho    404: .\" .It Li kern.bufq
                    405: .\" XXX: Undocumented.
1.91      kamil     406: .It Li kern.ccpu ( Dv KERN_CCPU )
1.1       pavel     407: The scheduler exponential decay value.
1.91      kamil     408: .It Li kern.clockrate ( Dv KERN_CLOCKRATE )
1.1       pavel     409: A
1.56      uwe       410: .Vt struct clockinfo
1.1       pavel     411: structure is returned.
                    412: This structure contains the clock, statistics clock and profiling clock
                    413: frequencies, the number of micro-seconds per hz tick, and the clock
                    414: skew rate.
1.36      jruoho    415: Refer to
                    416: .Xr hz 9
                    417: for additional details.
1.91      kamil     418: .It Li kern.consdev ( Dv KERN_CONSDEV )
1.1       pavel     419: Console device.
1.39      jruoho    420: .It Li kern.coredump
                    421: Settings related to set-id processes coredumps.
                    422: By default, set-id processes do not dump core in situations where
                    423: other processes would.
                    424: The settings in this node allows an administrator to change this
                    425: behavior.
                    426: .Pp
                    427: The third level name is
                    428: .Dv kern.coredump.setid
1.40      jruoho    429: and fourth level variables are described below.
                    430: .Bl -column "kern.coredump.setid.group" "integer" "Changeable" -offset indent
1.92      wiz       431: .It Sy Fourth level name       Sy Type Sy Changeable
1.40      jruoho    432: .It kern.coredump.setid.dump   integer yes
                    433: .It kern.coredump.setid.group  integer yes
                    434: .It kern.coredump.setid.mode   integer yes
                    435: .It kern.coredump.setid.owner  integer yes
                    436: .It kern.coredump.setid.path   string  yes
                    437: .El
1.39      jruoho    438: .Bl -tag -width "123456"
                    439: .It Li kern.coredump.setid.dump
                    440: If non-zero, set-id processes will dump core.
                    441: .It Li kern.coredump.setid.group
                    442: The group-id for the set-id processes' coredump.
                    443: .It Li kern.coredump.setid.mode
                    444: The mode for the set-id processes' coredump.
                    445: See
                    446: .Xr chmod 1 .
                    447: .It Li kern.coredump.setid.owner
                    448: The user-id that will be used as the owner of the set-id processes'
                    449: coredump.
                    450: .It Li kern.coredump.setid.path
                    451: The path to which set-id processes' coredumps will be saved to.
                    452: Same syntax as kern.defcorename.
                    453: .El
1.91      kamil     454: .It Li kern.cp_id ( Dv KERN_CP_ID )
1.1       pavel     455: Mapping of CPU number to CPU id.
1.91      kamil     456: .It Li kern.cp_time ( Dv KERN_CP_TIME )
1.56      uwe       457: Returns an array of
                    458: .Dv CPUSTATES
                    459: .Vt uint64_t Ns s.
1.1       pavel     460: This array contains the
                    461: number of clock ticks spent in different CPU states.
                    462: On multi-processor systems, the sum across all CPUs is returned unless
                    463: appropriate space is given for one data set for each CPU.
                    464: Data for a specific CPU can also be obtained by adding the number of the
                    465: CPU at the end of the MIB, enlarging it by one.
1.46      jruoho    466: .It Li kern.cryptodevallowsoft
                    467: This variable controls userland access to hardware versus software transforms
                    468: in the
                    469: .Xr crypto 4
                    470: system.
                    471: The available values are as follows:
1.47      wiz       472: .Bl -tag -width XX0 -offset indent
                    473: .It Dv \*[Lt] 0
1.46      jruoho    474: Always force userlevel requests to use software transforms.
                    475: .It Dv = 0
                    476: If present, use hardware and grant userlevel requests for
                    477: non-accelerated transforms (handling the latter in software).
1.47      wiz       478: .It Dv \*[Gt] 0
1.46      jruoho    479: Allow user requests only for transforms which are hardware-accelerated.
                    480: .El
1.91      kamil     481: .It Li kern.defcorename ( Dv KERN_DEFCORENAME )
1.1       pavel     482: Default template for the name of core dump files (see also
                    483: .Li proc.pid.corename
                    484: in the per-process variables
                    485: .Li proc.* ,
                    486: and
                    487: .Xr core 5
                    488: for format of this template).
                    489: The default value is
1.56      uwe       490: .Pa %n.core
1.1       pavel     491: and can be changed with the kernel configuration option
                    492: .Cd options DEFCORENAME
                    493: (see
                    494: .Xr options 4
                    495: ).
1.38      jruoho    496: .It Li kern.detachall
                    497: Detach all devices at shutdown.
1.91      kamil     498: .It Li kern.domainname ( Dv KERN_DOMAINNAME )
1.1       pavel     499: Get or set the YP domain name.
1.91      kamil     500: .It Li kern.drivers ( Dv KERN_DRIVERS )
1.1       pavel     501: Return an array of
1.56      uwe       502: .Vt struct kinfo_drivers
1.1       pavel     503: that contains the name and major device numbers of all the device drivers
                    504: in the current kernel.
                    505: The
                    506: .Va d_name
                    507: field is always a NUL terminated string.
                    508: The
                    509: .Va d_bmajor
                    510: field will be set to \-1 if the driver doesn't have a block device.
1.91      kamil     511: .It Li kern.dump_on_panic ( Dv KERN_DUMP_ON_PANIC )
1.41      jruoho    512: Perform a crash dump on system
                    513: .Xr panic 9 .
1.91      kamil     514: .It Li kern.file ( Dv KERN_FILE )
1.1       pavel     515: Return the entire file table.
                    516: The returned data consists of a single
1.56      uwe       517: .Vt struct filelist
1.1       pavel     518: followed by an array of
1.56      uwe       519: .Vt struct file ,
1.1       pavel     520: whose size depends on the current number of such objects in the system.
1.91      kamil     521: .It Li kern.forkfsleep ( Dv KERN_FORKFSLEEP )
1.1       pavel     522: If
                    523: .Xr fork 2
                    524: system call fails due to limit on number of processes (either
                    525: the global maxproc limit or user's one), wait for this many
                    526: milliseconds before returning
                    527: .Er EAGAIN
                    528: error to process.
                    529: Useful to keep heavily forking runaway processes in bay.
                    530: Default zero (no sleep).
                    531: Maximum is 20 seconds.
1.91      kamil     532: .It Li kern.fscale ( Dv KERN_FSCALE )
1.1       pavel     533: The kernel fixed-point scale factor.
1.91      kamil     534: .It Li kern.fsync ( Dv KERN_FSYNC )
1.58      wiz       535: Return 1 if the
                    536: .St -p1003.1b-93
                    537: File Synchronization Option is available
1.1       pavel     538: on this system,
1.56      uwe       539: otherwise\ 0.
1.91      kamil     540: .It Li kern.hardclock_ticks ( Dv KERN_HARDCLOCK_TICKS )
1.1       pavel     541: Returns the number of
                    542: .Xr hardclock 9
                    543: ticks.
1.91      kamil     544: .It Li kern.hostid ( Dv KERN_HOSTID )
1.39      jruoho    545: Get or set the host identifier.
                    546: This is aimed to replace the legacy
                    547: .Xr gethostid 3
                    548: and
                    549: .Xr sethostid 3
                    550: system calls.
1.91      kamil     551: .It Li kern.hostname ( Dv KERN_HOSTNAME )
1.39      jruoho    552: Get or set the
                    553: .Xr hostname 1 .
1.91      kamil     554: .It Li kern.iov_max ( Dv KERN_IOV_MAX )
1.1       pavel     555: Return the maximum number of
1.56      uwe       556: .Vt iovec
1.1       pavel     557: structures that a process has available for use with
                    558: .Xr preadv 2 ,
                    559: .Xr pwritev 2 ,
                    560: .Xr readv 2 ,
                    561: .Xr recvmsg 2 ,
                    562: .Xr sendmsg 2
                    563: and
                    564: .Xr writev 2 .
1.91      kamil     565: .It Li kern.ipc ( Dv KERN_SYSVIPC )
1.39      jruoho    566: Return information about the SysV IPC parameters.
                    567: The third level names for the ipc variables are detailed below.
                    568: .Bl -column "kern.ipc.shm_use_phys" "integer" "Changeable" -offset indent
1.92      wiz       569: .It Sy Third level name        Sy Type Sy Changeable
1.39      jruoho    570: .It kern.ipc.sysvmsg   integer no
                    571: .It kern.ipc.sysvsem   integer no
                    572: .It kern.ipc.sysvshm   integer no
                    573: .It kern.ipc.sysvipc_info      struct  no
                    574: .It kern.ipc.shmmax    integer yes
                    575: .It kern.ipc.shmmni    integer yes
                    576: .It kern.ipc.shmseg    integer yes
                    577: .It kern.ipc.shmmaxpgs integer yes
                    578: .It kern.ipc.shm_use_phys      integer yes
                    579: .It kern.ipc.msgmni    integer yes
                    580: .It kern.ipc.msgseg    integer yes
                    581: .It kern.ipc.semmni    integer yes
                    582: .It kern.ipc.semmns    integer yes
                    583: .It kern.ipc.semmnu    integer yes
                    584: .El
                    585: .Bl -tag -width "123456"
1.91      kamil     586: .It Li kern.ipc.sysvmsg ( Dv KERN_SYSVIPC_MSG )
1.39      jruoho    587: Returns 1 if System V style message queue functionality is available
                    588: on this system,
1.56      uwe       589: otherwise\ 0.
1.91      kamil     590: .It Li kern.ipc.sysvsem ( Dv KERN_SYSVIPC_SEM )
1.39      jruoho    591: Returns 1 if System V style semaphore functionality is available
                    592: on this system,
1.56      uwe       593: otherwise\ 0.
1.91      kamil     594: .It Li kern.ipc.sysvshm ( Dv KERN_SYSVIPC_SHM )
1.39      jruoho    595: Returns 1 if System V style share memory functionality is available
                    596: on this system,
1.56      uwe       597: otherwise\ 0.
1.91      kamil     598: .It Li kern.ipc.sysvipc_info ( Dv KERN_SYSVIPC_INFO )
1.39      jruoho    599: Return System V style IPC configuration and run-time information.
                    600: The fourth level name selects the System V style IPC facility.
                    601: .Bl -column "KERN_SYSVIPC_MSG_INFO" "struct shm_sysctl_info" -offset indent
1.92      wiz       602: .It Sy Fourth level name       Sy Type
1.39      jruoho    603: .It KERN_SYSVIPC_MSG_INFO      struct msg_sysctl_info
                    604: .It KERN_SYSVIPC_SEM_INFO      struct sem_sysctl_info
                    605: .It KERN_SYSVIPC_SHM_INFO      struct shm_sysctl_info
                    606: .El
                    607: .Bl -tag -width "123456"
                    608: .It Li KERN_SYSVIPC_MSG_INFO
                    609: Return information on the System V style message facility.
                    610: The
                    611: .Sy msg_sysctl_info
                    612: structure is defined in
                    613: .In sys/msg.h .
                    614: .It Li KERN_SYSVIPC_SEM_INFO
                    615: Return information on the System V style semaphore facility.
                    616: The
                    617: .Sy sem_sysctl_info
                    618: structure is defined in
                    619: .In sys/sem.h .
                    620: .It Li KERN_SYSVIPC_SHM_INFO
                    621: Return information on the System V style shared memory facility.
                    622: The
                    623: .Sy shm_sysctl_info
                    624: structure is defined in
                    625: .In sys/shm.h .
                    626: .El
1.91      kamil     627: .It Li kern.ipc.shmmax ( Dv KERN_SYSVIPC_SHMMAX )
1.39      jruoho    628: Max shared memory segment size in bytes.
1.91      kamil     629: .It Li kern.ipc.shmmni ( Dv KERN_SYSVIPC_SHMMNI )
1.39      jruoho    630: Max number of shared memory identifiers.
1.91      kamil     631: .It Li kern.ipc.shmseg ( Dv KERN_SYSVIPC_SHMSEG )
1.39      jruoho    632: Max shared memory segments per process.
1.91      kamil     633: .It Li kern.ipc.shmmaxpgs ( Dv KERN_SYSVIPC_SHMMAXPGS )
1.39      jruoho    634: Max amount of shared memory in pages.
1.91      kamil     635: .It Li kern.ipc.shm_use_phys ( Dv KERN_SYSVIPC_SHMUSEPHYS )
1.39      jruoho    636: Locking of shared memory in physical memory.
                    637: If 0, memory can be swapped
                    638: out, otherwise it will be locked in physical memory.
                    639: .It Li kern.ipc.msgmni
                    640: Max number of message queue identifiers.
                    641: .It Li kern.ipc.msgseg
                    642: Max number of number of message segments.
                    643: .It Li kern.ipc.semmni
                    644: Max number of number of semaphore identifiers.
                    645: .It Li kern.ipc.semmns
                    646: Max number of number of semaphores in system.
                    647: .It Li kern.ipc.semmnu
                    648: Max number of undo structures in system.
                    649: .El
1.91      kamil     650: .It Li kern.job_control ( Dv KERN_JOB_CONTROL )
1.56      uwe       651: Return 1 if job control is available on this system, otherwise\ 0.
1.91      kamil     652: .It Li kern.labeloffset ( Dv KERN_LABELOFFSET )
1.56      uwe       653: The offset within the sector specified by
                    654: .Dv KERN_LABELSECTOR
                    655: of the
1.1       pavel     656: .Xr disklabel 5 .
1.91      kamil     657: .It Li kern.labelsector ( Dv KERN_LABELSECTOR )
1.1       pavel     658: The sector number containing the
                    659: .Xr disklabel 5 .
1.91      kamil     660: .It Li kern.login_name_max ( Dv KERN_LOGIN_NAME_MAX )
1.1       pavel     661: The size of the storage required for a login name, in bytes,
                    662: including the terminating NUL.
1.91      kamil     663: .It Li kern.logsigexit ( Dv KERN_LOGSIGEXIT )
1.1       pavel     664: If this flag is non-zero, the kernel will
                    665: .Xr log 9
                    666: all process exits due to signals which create a
                    667: .Xr core 5
                    668: file, and whether the coredump was created.
1.91      kamil     669: .It Li kern.mapped_files ( Dv KERN_MAPPED_FILES )
1.58      wiz       670: Returns 1 if the
                    671: .St -p1003.1b-93
                    672: Memory Mapped Files Option is available on this system,
1.56      uwe       673: otherwise\ 0.
1.91      kamil     674: .It Li kern.maxfiles ( Dv KERN_MAXFILES )
1.1       pavel     675: The maximum number of open files that may be open in the system.
1.91      kamil     676: .It Li kern.maxpartitions ( Dv KERN_MAXPARTITIONS )
1.1       pavel     677: The maximum number of partitions allowed per disk.
1.71      wiz       678: .It Li kern.maxlwp
1.70      christos  679: The maximum number of Lightweight Processes (threads) the system allows
                    680: per uid.
1.91      kamil     681: .It Li kern.maxphys ( Dv KERN_MAXPHYS )
1.1       pavel     682: Maximum raw I/O transfer size.
1.91      kamil     683: .It Li kern.maxproc ( Dv KERN_MAXPROC )
1.1       pavel     684: The maximum number of simultaneous processes the system will allow.
1.91      kamil     685: .It Li kern.maxptys ( Dv KERN_MAXPTYS )
1.1       pavel     686: The maximum number of pseudo terminals.
                    687: This value can be both raised and lowered, though it cannot
                    688: be set lower than number of currently used ptys.
                    689: See also
                    690: .Xr pty 4 .
1.91      kamil     691: .It Li kern.maxvnodes ( Dv KERN_MAXVNODES )
1.1       pavel     692: The maximum number of vnodes available on the system.
                    693: This can only be raised.
1.91      kamil     694: .It Li kern.mbuf ( Dv KERN_MBUF )
1.1       pavel     695: Return information about the mbuf control variables.
                    696: Mbufs are data structures which store network packets and other data
                    697: structures in the networking code, see
                    698: .Xr mbuf 9 .
                    699: The third level names for the mbuf variables are detailed below.
                    700: The changeable column shows whether a process with appropriate
                    701: privilege may change the value.
1.21      joerg     702: .Bl -column "kern.mbuf.nmbclusters" "integer" "Changeable" -offset indent
1.92      wiz       703: .It Sy Third level name        Sy Type Sy Changeable
1.1       pavel     704: .\" XXX Changeable? really?
                    705: .It kern.mbuf.mblowat  integer yes
                    706: .It kern.mbuf.mclbytes integer yes
                    707: .It kern.mbuf.mcllowat integer yes
                    708: .It kern.mbuf.msize    integer yes
                    709: .It kern.mbuf.nmbclusters      integer yes
                    710: .El
                    711: .Pp
                    712: The variables are as follows:
                    713: .Bl -tag -width "123456"
1.91      kamil     714: .It Li kern.mbuf.mblowat ( Dv MBUF_MBLOWAT )
1.1       pavel     715: The mbuf low water mark.
1.91      kamil     716: .It Li kern.mbuf.mclbytes ( Dv MBUF_MCLBYTES )
1.1       pavel     717: The mbuf cluster size.
1.91      kamil     718: .It Li kern.mbuf.mcllowat ( Dv MBUF_MCLLOWAT )
1.1       pavel     719: The mbuf cluster low water mark.
1.91      kamil     720: .It Li kern.mbuf.msize ( Dv MBUF_MSIZE )
1.1       pavel     721: The mbuf base size.
1.91      kamil     722: .It Li kern.mbuf.nmbclusters ( Dv MBUF_NMBCLUSTERS )
1.1       pavel     723: The limit on the number of mbuf clusters.
                    724: The variable can only be increased, and only increased on machines with
                    725: direct-mapped pool pages.
                    726: .El
1.91      kamil     727: .It Li kern.memlock ( Dv KERN_MEMLOCK )
1.58      wiz       728: Returns 1 if the
                    729: .St -p1003.1b-93
                    730: Process Memory Locking Option is available on this system,
1.56      uwe       731: otherwise\ 0.
1.91      kamil     732: .It Li kern.memlock_range ( Dv KERN_MEMLOCK_RANGE )
1.58      wiz       733: Returns 1 if the
                    734: .St -p1003.1b-93
                    735: Range Memory Locking Option is available on this system,
1.56      uwe       736: otherwise\ 0.
1.91      kamil     737: .It Li kern.memory_protection ( Dv KERN_MEMORY_PROTECTION )
1.58      wiz       738: Returns 1 if the
                    739: .St -p1003.1b-93
                    740: Memory Protection Option is available on this system,
1.56      uwe       741: otherwise\ 0.
1.42      jruoho    742: .It Li kern.module
                    743: Settings related to kernel modules.
                    744: The third level names for the settings are described below.
                    745: .Bl -column "kern.module.autoload" "integer" "Changeable" -offset indent
1.92      wiz       746: .It Sy Third level name        Sy Type Sy Changeable
1.42      jruoho    747: .It kern.module.autoload       integer yes
1.78      pgoyette  748: .It kern.module.autotime       integer yes
1.42      jruoho    749: .It kern.module.verbose        integer yes
                    750: .El
                    751: .Pp
                    752: The variables are as follows:
                    753: .Bl -tag -width "123456"
                    754: .It Li kern.module.autoload
                    755: A boolean that controls whether kernel modules are loaded automatically.
1.52      jruoho    756: See
1.53      jruoho    757: .Xr module 7
1.42      jruoho    758: for additional details.
1.78      pgoyette  759: .It Li kern.module.autotime
                    760: An integer that controls the delay before an attempt is made to
1.79      wiz       761: automatically unload a module that was auto-loaded.
                    762: Setting this value to zero disables the auto-unload function.
1.42      jruoho    763: .It Li kern.module.verbose
                    764: A boolean that enables or disables verbose
                    765: debug messages related to kernel modules.
                    766: .El
1.91      kamil     767: .It Li kern.monotonic_clock ( Dv KERN_MONOTONIC_CLOCK )
1.58      wiz       768: Returns the standard version the implementation of the
                    769: .St -p1003.1b-93
1.49      jruoho    770: Monotonic Clock Option conforms to,
1.56      uwe       771: otherwise\ 0.
1.48      jruoho    772: .It Li kern.mqueue
                    773: Settings related to
                    774: .Tn POSIX
                    775: message queues; see
                    776: .Xr mqueue 3 .
                    777: This node is created dynamically when
                    778: the corresponding kernel module is loaded.
                    779: The third level names for the settings are described below.
                    780: .Bl -column "kern.mqueue.mq_max_msgsize" "integer" "Changeable" -offset indent
1.92      wiz       781: .It Sy Third level name        Sy Type Sy Changeable
1.48      jruoho    782: .It kern.mqueue.mq_open_max    integer yes
                    783: .It kern.mqueue.mq_prio_max    integer yes
                    784: .It kern.mqueue.mq_max_msgsize integer yes
                    785: .It kern.mqueue.mq_def_maxmsg  integer yes
                    786: .It kern.mqueue.mq_max_maxmsg  integer yes
                    787: .El
                    788: .Pp
                    789: The variables are:
                    790: .Bl -tag -width "123456"
                    791: .It Li kern.mqueue.mq_open_max
                    792: The maximum number of message queue descriptors any single process can open.
                    793: .It Li kern.mqueue.mq_prio_max
                    794: The maximum priority of a message.
                    795: .It Li kern.mqueue.mq_max_msgsize
                    796: The maximum size of a message in a message queue.
                    797: .It Li kern.mqueue.mq_def_maxmsg
                    798: The default maximum message count.
                    799: .It Li kern.mqueue.mq_max_maxmsg
                    800: The maximum number of messages in a message queue.
                    801: .El
1.91      kamil     802: .It Li kern.msgbuf ( Dv KERN_MSGBUF )
1.1       pavel     803: The kernel message buffer, rotated so that the head of the circular kernel
                    804: message buffer is at the start of the returned data.
                    805: The returned data may contain NUL bytes.
1.91      kamil     806: .It Li kern.msgbufsize ( Dv KERN_MSGBUFSIZE )
1.1       pavel     807: The maximum number of characters that the kernel message buffer can hold.
1.91      kamil     808: .It Li kern.ngroups ( Dv KERN_NGROUPS )
1.1       pavel     809: The maximum number of supplemental groups.
1.41      jruoho    810: .\" .It Li kern.no_sa_support
                    811: .\" XXX: Undocumented.
1.91      kamil     812: .It Li kern.ntptime ( Dv KERN_NTPTIME )
1.1       pavel     813: A
1.56      uwe       814: .Vt struct ntptimeval
1.1       pavel     815: structure is returned.
                    816: This structure contains data used by the
                    817: .Xr ntpd 8
                    818: program.
1.91      kamil     819: .It Li kern.osrelease ( Dv KERN_OSRELEASE )
1.1       pavel     820: The system release string.
1.91      kamil     821: .It Li kern.osrevision ( Dv KERN_OSREV )
1.1       pavel     822: The system revision string.
1.91      kamil     823: .It Li kern.ostype ( Dv KERN_OSTYPE )
1.1       pavel     824: The system type string.
1.41      jruoho    825: .\".It Li kern.panic_now
                    826: .\" XXX: Undocumented.
1.91      kamil     827: .It Li kern.pipe ( Dv KERN_PIPE )
1.1       pavel     828: Pipe settings.
                    829: The third level names for the  integer pipe settings is detailed below.
                    830: The changeable column shows whether a process with appropriate
                    831: privilege may change the value.
1.21      joerg     832: .Bl -column "kern.pipe.maxbigpipes" "integer" "Changeable" -offset indent
1.92      wiz       833: .It Sy Third level name        Sy Type Sy Changeable
1.1       pavel     834: .It kern.pipe.kvasiz   integer yes
                    835: .It kern.pipe.maxbigpipes      integer yes
                    836: .It kern.pipe.maxkvasz integer yes
                    837: .It kern.pipe.limitkva integer yes
                    838: .It kern.pipe.nbigpipes        integer yes
                    839: .El
                    840: .Pp
                    841: The variables are as follows:
                    842: .Bl -tag -width "123456"
1.91      kamil     843: .It Li kern.pipe.kvasiz ( Dv KERN_PIPE_KVASIZ )
1.1       pavel     844: Amount of kernel memory consumed by pipe buffers.
1.91      kamil     845: .It Li kern.pipe.maxbigpipes ( Dv KERN_PIPE_MAXBIGPIPES )
1.56      uwe       846: Maximum number of
                    847: .Dq big
                    848: pipes.
1.91      kamil     849: .It Li kern.pipe.maxkvasz ( Dv KERN_PIPE_MAXKVASZ )
1.1       pavel     850: Maximum amount of kernel memory to be used for pipes.
1.91      kamil     851: .It Li kern.pipe.limitkva ( Dv KERN_PIPE_LIMITKVA )
1.1       pavel     852: Limit for direct transfers via page loan.
1.91      kamil     853: .It Li kern.pipe.nbigpipes ( Dv KERN_PIPE_NBIGPIPES )
1.56      uwe       854: Number of
                    855: .Dq big
                    856: pipes.
1.1       pavel     857: .El
1.82      joerg     858: .It Li kern.pool
                    859: Provides statistics about the
1.83      wiz       860: .Xr pool 9
1.82      joerg     861: and
                    862: .Xr pool_cache 9
                    863: subsystems.
1.39      jruoho    864: .\" XXX: Undocumented .It Li kern.posix ( ? )
                    865: .\"     This is a node in which the only variable is semmax.
1.91      kamil     866: .It Li kern.posix1version ( Dv KERN_POSIX1 )
1.58      wiz       867: The version of ISO/IEC 9945
                    868: .Pq St -p1003.1
                    869: with which the system attempts to comply.
1.51      jruoho    870: .It Li kern.posix_aio
                    871: The version of
                    872: .St -p1003.1
                    873: and its Asynchronous I/O option to which the system attempts to conform.
1.91      kamil     874: .It Li kern.posix_barriers ( Dv KERN_POSIX_BARRIERS )
1.1       pavel     875: The version of
                    876: .St -p1003.1
                    877: and its
                    878: Barriers
                    879: option to which the system attempts to conform,
1.56      uwe       880: otherwise\ 0.
1.91      kamil     881: .It Li kern.posix_reader_writer_locks ( Dv KERN_POSIX_READER_WRITER_LOCKS )
1.1       pavel     882: The version of
                    883: .St -p1003.1
                    884: and its
                    885: Read-Write Locks
                    886: option to which the system attempts to conform,
1.56      uwe       887: otherwise\ 0.
1.41      jruoho    888: .\".It Li kern.posix_sched
                    889: .\" XXX: Undocumented.
1.91      kamil     890: .It Li kern.posix_semaphores ( Dv KERN_POSIX_SEMAPHORES )
1.1       pavel     891: The version of
                    892: .St -p1003.1
                    893: and its
                    894: Semaphores
                    895: option to which the system attempts to conform,
1.56      uwe       896: otherwise\ 0.
1.91      kamil     897: .It Li kern.posix_spin_locks ( Dv KERN_POSIX_SPIN_LOCKS )
1.1       pavel     898: The version of
                    899: .St -p1003.1
                    900: and its
                    901: Spin Locks
                    902: option to which the system attempts to conform,
1.56      uwe       903: otherwise\ 0.
1.91      kamil     904: .It Li kern.posix_threads ( Dv KERN_POSIX_THREADS )
1.1       pavel     905: The version of
                    906: .St -p1003.1
                    907: and its
                    908: Threads
                    909: option to which the system attempts to conform,
1.56      uwe       910: otherwise\ 0.
1.91      kamil     911: .It Li kern.posix_timers ( Dv KERN_POSIX_TIMERS )
1.1       pavel     912: The version of
                    913: .St -p1003.1
                    914: and its
                    915: Timers
                    916: option to which the system attempts to conform,
1.56      uwe       917: otherwise\ 0.
1.91      kamil     918: .It Li kern.proc ( Dv KERN_PROC )
1.1       pavel     919: Return the entire process table, or a subset of it.
                    920: An array of
1.56      uwe       921: .Vt struct kinfo_proc
1.1       pavel     922: structures is returned,
                    923: whose size depends on the current number of such objects in the system.
                    924: The third and fourth level numeric names are as follows:
1.21      joerg     925: .Bl -column "KERN_PROC_SESSION" "Fourth level is:" -offset indent
1.92      wiz       926: .It Sy Third level name        Sy Fourth level is:
1.21      joerg     927: .It KERN_PROC_ALL      None
                    928: .It KERN_PROC_GID      A group ID
                    929: .It KERN_PROC_PID      A process ID
                    930: .It KERN_PROC_PGRP     A process group
                    931: .It KERN_PROC_RGID     A real group ID
                    932: .It KERN_PROC_RUID     A real user ID
                    933: .It KERN_PROC_SESSION  A session ID
                    934: .It KERN_PROC_TTY      A tty device
                    935: .It KERN_PROC_UID      A user ID
1.1       pavel     936: .El
1.91      kamil     937: .It Li kern.proc2 ( Dv KERN_PROC2 )
1.56      uwe       938: As for
                    939: .Dv KERN_PROC ,
                    940: but an array of
                    941: .Vt struct kinfo_proc2
1.1       pavel     942: structures are returned.
                    943: The fifth level name is the size of the
1.56      uwe       944: .Vt struct kinfo_proc2
1.1       pavel     945: and the sixth level name is the number of structures to return.
1.91      kamil     946: .It Li kern.proc_args ( Dv KERN_PROC_ARGS )
1.1       pavel     947: Return the argv or environment strings (or the number thereof)
                    948: of a process.
                    949: Multiple strings are returned separated by NUL characters.
                    950: The third level name is the process ID.
                    951: The fourth level name is as follows:
1.93      christos  952: .Bl -column "KERN_PROG_PATHNAME" "The full pathname of the executable" -offset indent
1.92      wiz       953: .It Dv KERN_PROC_ARGV  The argv strings
                    954: .It Dv KERN_PROC_ENV   The environ strings
                    955: .It Dv KERN_PROC_NARGV The number of argv strings
                    956: .It Dv KERN_PROC_NENV  The number of environ strings
1.93      christos  957: .It Dv KERN_PROC_PATHNAME      The full pathname of the executable
1.1       pavel     958: .El
1.91      kamil     959: .It Li kern.profiling ( Dv KERN_PROF )
1.1       pavel     960: Return profiling information about the kernel.
                    961: If the kernel is not compiled for profiling,
1.56      uwe       962: attempts to retrieve any of the
                    963: .Dv KERN_PROF
                    964: values will fail with
1.1       pavel     965: .Er EOPNOTSUPP .
                    966: The third level names for the string and integer profiling information
                    967: is detailed below.
                    968: The changeable column shows whether a process with appropriate
                    969: privilege may change the value.
1.21      joerg     970: .Bl -column "kern.profiling.gmonparam" "struct gmonparam" "Changeable" -offset indent
1.92      wiz       971: .It Sy Third level name        Sy Type Sy Changeable
1.1       pavel     972: .It kern.profiling.count       u_short[\|]     yes
                    973: .It kern.profiling.froms       u_short[\|]     yes
                    974: .It kern.profiling.gmonparam   struct gmonparam        no
                    975: .It kern.profiling.state       integer yes
                    976: .It kern.profiling.tos struct tostruct yes
                    977: .El
                    978: .Pp
                    979: The variables are as follows:
                    980: .Bl -tag -width "123456"
1.91      kamil     981: .It Li kern.profiling.count ( Dv GPROF_COUNT )
1.1       pavel     982: Array of statistical program counter counts.
1.91      kamil     983: .It Li kern.profiling.froms ( Dv GPROF_FROMS )
1.1       pavel     984: Array indexed by program counter of call-from points.
1.91      kamil     985: .It Li kern.profiling.gmonparams ( Dv GPROF_GMONPARAM )
1.1       pavel     986: Structure giving the sizes of the above arrays.
1.91      kamil     987: .It Li kern.profiling.state ( Dv GPROF_STATE )
1.1       pavel     988: Profiling state.
1.56      uwe       989: If set to
                    990: .Dv GMON_PROF_ON ,
                    991: starts profiling.
                    992: If set to
                    993: .Dv GMON_PROF_OFF ,
                    994: stops profiling.
1.91      kamil     995: .It Li kern.profiling.tos ( Dv GPROF_TOS )
1.1       pavel     996: Array of
1.56      uwe       997: .Vt struct tostruct
1.1       pavel     998: describing destination of calls and their counts.
                    999: .El
1.41      jruoho   1000: .\" .It Li kern.pset
                   1001: .\" XXX: Undocumented.
1.91      kamil    1002: .It Li kern.rawpartition ( Dv KERN_RAWPARTITION )
1.1       pavel    1003: The raw partition of a disk (a == 0).
1.91      kamil    1004: .It Li kern.root_device ( Dv KERN_ROOT_DEVICE )
1.1       pavel    1005: The name of the root device (e.g.,
                   1006: .Dq wd0 ) .
1.91      kamil    1007: .It Li kern.root_partition ( Dv KERN_ROOT_PARTITION )
1.1       pavel    1008: The root partition on the root device (a == 0).
1.91      kamil    1009: .It Li kern.rtc_offset ( Dv KERN_RTC_OFFSET )
1.1       pavel    1010: Return the offset of real time clock from UTC in minutes.
1.91      kamil    1011: .It Li kern.saved_ids ( Dv KERN_SAVED_IDS )
1.1       pavel    1012: Returns 1 if saved set-group and saved set-user ID is available.
1.91      kamil    1013: .It Li kern.sbmax ( Dv KERN_SBMAX )
1.1       pavel    1014: Maximum socket buffer size.
                   1015: .\" XXX units?
1.91      kamil    1016: .It Li kern.securelevel ( Dv KERN_SECURELVL )
1.25      elad     1017: See
                   1018: .Xr secmodel_securelevel 9 .
1.41      jruoho   1019: .\" .It Li kern.sched
                   1020: .\" XXX: Undocumented.
1.91      kamil    1021: .It Li kern.somaxkva ( Dv KERN_SOMAXKVA )
1.1       pavel    1022: Maximum amount of kernel memory to be used for socket buffers.
                   1023: .\" XXX units?
1.91      kamil    1024: .It Li kern.synchronized_io ( Dv KERN_SYNCHRONIZED_IO )
1.58      wiz      1025: Returns 1 if the
                   1026: .St -p1003.1b-93
                   1027: Synchronized I/O Option is available on this system,
1.56      uwe      1028: otherwise\ 0.
1.19      christos 1029: .It Li kern.timecounter ( dynamic )
                   1030: Display and control the timecounter source of the system.
1.21      joerg    1031: .Bl -column "kern.timecounter.timestepwarnings" "integer" "Changeable" -offset indent
1.92      wiz      1032: .It Sy Third level name        Sy Type Sy Changeable
1.19      christos 1033: .It kern.timecounter.choice    string  no
                   1034: .It kern.timecounter.hardware  string  yes
                   1035: .It kern.timecounter.timestepwarnings  integer yes
                   1036: .El
                   1037: .Pp
                   1038: The variables are as follows:
                   1039: .Bl -tag -width "123456"
                   1040: .It Li kern.timecounter.choice ( dynamic )
                   1041: The list of available timecounters with their quality and frequency.
                   1042: .It Li kern.timecounter.hardware ( dynamic )
                   1043: The currently selected timecounter source.
                   1044: .It Li kern.timecounter.timestepwarnings ( dynamic )
                   1045: If non-zero display a message each time the time is stepped.
                   1046: .El
1.91      kamil    1047: .It Li kern.timex ( Dv KERN_TIMEX )
1.1       pavel    1048: Not available.
1.91      kamil    1049: .It Li kern.tkstat ( Dv KERN_TKSTAT )
1.1       pavel    1050: Return information about the number of characters sent and received
                   1051: on ttys.
                   1052: The third level names for the tty statistic variables are detailed below.
                   1053: The changeable column shows whether a process
                   1054: with appropriate privilege may change the value.
1.21      joerg    1055: .Bl -column "kern.tkstat.cancc" "quad" "Changeable" -offset indent
1.92      wiz      1056: .It Sy Third level name        Sy Type Sy Changeable
1.1       pavel    1057: .It kern.tkstat.cancc  quad    no
                   1058: .It kern.tkstat.nin    quad    no
                   1059: .It kern.tkstat.nout   quad    no
                   1060: .It kern.tkstat.rawcc  quad    no
                   1061: .El
                   1062: .Pp
                   1063: The variables are as follows:
                   1064: .Bl -tag -width "123456"
1.91      kamil    1065: .It Li kern.tkstat.cancc ( Dv KERN_TKSTAT_CANCC )
1.1       pavel    1066: The number of canonical input characters.
1.91      kamil    1067: .It Li kern.tkstat.nin ( Dv KERN_TKSTAT_NIN )
1.1       pavel    1068: The total number of input characters.
1.91      kamil    1069: .It Li kern.tkstat.nout ( Dv KERN_TKSTAT_NOUT )
1.1       pavel    1070: The total number of output characters.
1.91      kamil    1071: .It Li kern.tkstat.rawcc ( Dv KERN_TKSTAT_RAWCC )
1.1       pavel    1072: The number of raw input characters.
                   1073: .El
1.66      christos 1074: .It Li kern.tty
                   1075: The third level names for the tty setup variables are detailed below.
                   1076: The changeable column shows whether a process
                   1077: with appropriate privilege may change the value.
                   1078: .Bl -column "kern.tty.qsize" "int" "Changeable" -offset indent
1.92      wiz      1079: .It Sy Third level name        Sy Type Sy Changeable
1.66      christos 1080: .It kern.tty.qsize     int     yes
                   1081: .El
                   1082: .Pp
                   1083: The variables are as follows:
                   1084: .Bl -tag -width "123456"
                   1085: .It Li kern.tty.qsize
                   1086: Control/display the size of the default input and output queues selected
                   1087: during tty creation.
                   1088: Is converted to a power of two and its range is between
                   1089: .Dv 1024
                   1090: and
                   1091: .Dv 65536 .
                   1092: .El
1.70      christos 1093: .It Li kern.uidinfo
                   1094: Resource usage for the current user.
                   1095: .Bl -column "kern.uidinfo.proccnt" "integer" "Changeable" -offset indent
1.92      wiz      1096: .It Sy Third level name        Sy Type Sy Changeable
1.70      christos 1097: .It kern.uidinfo.proccnt       integer no
                   1098: .It kern.uidinfo.lwpcnt        integer no
                   1099: .It kern.uidinfo.lockcnt       integer no
                   1100: .It kern.uidinfo.sbsize        integer no
                   1101: .El
                   1102: .Bl -tag -width "123456"
                   1103: .It Li kern.uidinfo.proccnt
                   1104: Returns the number of active processes for the current user.
                   1105: .It Li kern.uidinfo.lwpcnt
                   1106: Returns the number of active threads for the current user; the first thread
                   1107: of each process is not counted.
                   1108: .It Li kern.uidinfo.lockcnt
                   1109: Number of locks held by the current user.
                   1110: .It Li kern.uidinfo.sbsize
                   1111: Number of bytes in socket buffers allocated to the current user.
                   1112: .El
1.91      kamil    1113: .It Li kern.urandom ( Dv KERN_URND )
1.1       pavel    1114: Random integer value.
1.45      jruoho   1115: .It Li kern.usercrypto
                   1116: When enabled, allows userland to
                   1117: .Xr open 2
                   1118: the
                   1119: .Pa /dev/crypto
                   1120: special device, used by the
                   1121: .Xr crypto 4
                   1122: system.
                   1123: .It Li kern.userasymcrypto
                   1124: Enables or disables the use of software asymmetric crypto support in the
                   1125: .Xr crypto 4
                   1126: system.
1.1       pavel    1127: .It Li kern.veriexec
1.40      jruoho   1128: Runtime information for
                   1129: .Xr veriexec 8 .
                   1130: .Bl -column "kern.veriexec.algorithms" "integer" "Changeable" -offset indent
1.92      wiz      1131: .It Sy Third level name        Sy Type Sy Changeable
1.40      jruoho   1132: .It kern.veriexec.algorithms   string  no
                   1133: .It kern.veriexec.count        node    not applicable
                   1134: .It kern.veriexec.strict       integer yes
                   1135: .It kern.veriexec.verbose      integer yes
                   1136: .El
1.1       pavel    1137: .Bl -tag -width "123456"
                   1138: .It Li kern.veriexec.algorithms
                   1139: Returns a string with the supported algorithms in Veriexec.
                   1140: .It Li kern.veriexec.count
                   1141: Sub-nodes are added to this node as new mounts are monitored by Veriexec.
                   1142: Each mount will be under its own
                   1143: .No tableN
                   1144: node.
                   1145: Under each node there will be three variables, indicating the mount
1.57      wiz      1146: point, the file system type, and the number of entries.
1.1       pavel    1147: .It Li kern.veriexec.strict
                   1148: Controls the strict level of Veriexec.
                   1149: See
1.62      jruoho   1150: .Xr security 7
1.1       pavel    1151: for more information on each level's implications.
                   1152: .It Li kern.veriexec.verbose
                   1153: Controls the verbosity level of Veriexec.
                   1154: If 0, only the minimal
                   1155: indication required will be given about what's happening - fingerprint
                   1156: mismatches, removal of entries from the tables, modification of a
                   1157: fingerprinted file.
                   1158: If 1, more messages will be printed (ie., when a file with a valid
                   1159: fingerprint is accessed).
                   1160: Verbose level 2 is debug mode.
                   1161: .El
1.91      kamil    1162: .It Li kern.version ( Dv KERN_VERSION )
1.1       pavel    1163: The system version string.
1.91      kamil    1164: .It Li kern.vnode ( Dv KERN_VNODE )
1.1       pavel    1165: Return the entire vnode table.
                   1166: Note, the vnode table is not necessarily a consistent snapshot of
                   1167: the system.
                   1168: The returned data consists of an array whose size depends on the
                   1169: current number of such objects in the system.
                   1170: Each element of the array contains the kernel address of a vnode
1.56      uwe      1171: .Vt struct vnode *
1.1       pavel    1172: followed by the vnode itself
1.56      uwe      1173: .Vt struct vnode .
1.43      jruoho   1174: .\" XXX: Undocumented: kern.lwp: no children?
1.1       pavel    1175: .El
1.50      jruoho   1176: .Ss The machdep.* subtree
1.1       pavel    1177: The set of variables defined is architecture dependent.
                   1178: Most architectures define at least the following variables.
1.43      jruoho   1179: .Bl -column "machdep.booted_kernel" "Type" "Changeable" -offset indent
1.92      wiz      1180: .It Sy Second level name       Sy Type Sy Changeable
1.43      jruoho   1181: .It Li machdep.booted_kernel   string  no
1.1       pavel    1182: .El
1.43      jruoho   1183: .\" XXX: Document the above.
1.50      jruoho   1184: .Ss The net.* subtree
1.1       pavel    1185: The string and integer information available for the
                   1186: .Li net
                   1187: level is detailed below.
                   1188: The changeable column shows whether a process with appropriate
                   1189: privilege may change the value.
                   1190: The second and third levels are typically the protocol family and
                   1191: protocol number, though this is not always the case.
1.21      joerg    1192: .Bl -column "Second level name" "IPsec key management values" "Changeable" -offset indent
1.92      wiz      1193: .It Sy Second level name       Sy Type Sy Changeable
1.1       pavel    1194: .It net.route  routing messages        no
                   1195: .It net.inet   IPv4 values     yes
                   1196: .It net.inet6  IPv6 values     yes
                   1197: .It net.key    IPsec key management values     yes
                   1198: .El
                   1199: .Bl -tag -width "123456"
1.91      kamil    1200: .It Li net.route ( Dv PF_ROUTE )
1.1       pavel    1201: .\" XXX really?
                   1202: Return the entire routing table or a subset of it.
                   1203: The data is returned as a sequence of routing messages (see
                   1204: .Xr route 4
                   1205: for the header file, format and meaning).
                   1206: The length of each message is contained in the message header.
                   1207: .Pp
1.56      uwe      1208: The third level name is a protocol number, which is currently always\ 0.
1.1       pavel    1209: The fourth level name is an address family, which may be set to 0 to
                   1210: select all address families.
                   1211: The fifth and sixth level names are as follows:
1.21      joerg    1212: .Bl -column "Fifth level name" "Sixth level is:" -offset indent
1.92      wiz      1213: .It Sy Fifth level name        Sy Sixth level is:
1.21      joerg    1214: .It NET_RT_FLAGS       rtflags
                   1215: .It NET_RT_DUMP        None
                   1216: .It NET_RT_IFLIST      None
1.1       pavel    1217: .El
1.91      kamil    1218: .It Li net.inet ( Dv PF_INET )
1.1       pavel    1219: Get or set various global information about the IPv4
                   1220: .Pq Internet Protocol version 4 .
                   1221: The third level name is the protocol.
                   1222: The fourth level name is the variable name.
                   1223: The currently defined protocols and names are:
1.92      wiz      1224: .Bl -column "Protocol" "anonportalgo.available" "integer" "Changeable" -offset indent
                   1225: .It Sy Protocol        Variable        Sy Type Sy Changeable
1.1       pavel    1226: .It arp        down    integer yes
                   1227: .It arp        keep    integer yes
1.65      christos 1228: .It arp        log_movements   integer yes
                   1229: .It arp        log_permanent_modify    integer yes
1.86      christos 1230: .It arp        log_unknown_network     integer yes
1.65      christos 1231: .It arp        log_wrong_iface integer yes
1.1       pavel    1232: .It arp        prune   integer yes
                   1233: .It arp        refresh integer yes
                   1234: .It carp       allow   integer yes
                   1235: .It carp       preempt integer yes
                   1236: .It carp       log     integer yes
                   1237: .It carp       arpbalance      integer yes
                   1238: .It icmp       errppslimit     integer yes
                   1239: .It icmp       maskrepl        integer yes
                   1240: .It icmp       rediraccept     integer yes
                   1241: .It icmp       redirtimeout    integer yes
1.28      christos 1242: .It icmp       bmcastecho      integer yes
1.1       pavel    1243: .It ip allowsrcrt      integer yes
1.72      christos 1244: .It ip         anonportalgo.selected   string  yes
                   1245: .It ip         anonportalgo.available  string  yes
1.74      christos 1246: .It ip         anonportalgo.reserve    struct  yes
1.1       pavel    1247: .It ip anonportmax     integer yes
                   1248: .It ip anonportmin     integer yes
                   1249: .It ip checkinterface  integer yes
                   1250: .It ip directed-broadcast      integer yes
                   1251: .It ip do_loopback_cksum       integer yes
                   1252: .It ip forwarding      integer yes
                   1253: .It ip forwsrcrt       integer yes
                   1254: .It ip gifttl  integer yes
                   1255: .It ip grettl  integer yes
1.8       liamjfoy 1256: .It ip hashsize        integer yes
1.1       pavel    1257: .It ip hostzerobroadcast       integer yes
                   1258: .It ip lowportmin      integer yes
                   1259: .It ip lowportmax      integer yes
                   1260: .It ip maxflows        integer yes
                   1261: .It ip maxfragpackets  integer yes
                   1262: .It ip mtudisc integer yes
                   1263: .It ip mtudisctimeout  integer yes
                   1264: .It ip random_id       integer yes
                   1265: .It ip redirect        integer yes
                   1266: .It ip subnetsarelocal integer yes
                   1267: .It ip ttl     integer yes
                   1268: .It tcp        rfc1323 integer yes
                   1269: .It tcp        sendspace       integer yes
                   1270: .It tcp        recvspace       integer yes
                   1271: .It tcp        mssdflt integer yes
                   1272: .It tcp        syn_cache_limit integer yes
                   1273: .It tcp        syn_bucket_limit        integer yes
                   1274: .It tcp        syn_cache_interval      integer yes
                   1275: .It tcp        init_win        integer yes
                   1276: .It tcp        init_win_local  integer yes
                   1277: .It tcp        mss_ifmtu       integer yes
                   1278: .It tcp        win_scale       integer yes
                   1279: .It tcp        timestamps      integer yes
                   1280: .It tcp        compat_42       integer yes
                   1281: .It tcp        cwm     integer yes
                   1282: .It tcp        cwm_burstsize   integer yes
                   1283: .It tcp        ack_on_push     integer yes
                   1284: .It tcp        keepidle        integer yes
                   1285: .It tcp        keepintvl       integer yes
                   1286: .It tcp        keepcnt integer yes
                   1287: .It tcp        slowhz  integer no
1.12      christos 1288: .It tcp        keepinit        integer yes
1.1       pavel    1289: .It tcp        log_refused     integer yes
                   1290: .It tcp        rstppslimit     integer yes
                   1291: .It tcp        ident   struct  no
1.13      christos 1292: .It tcp        drop    struct  no
1.1       pavel    1293: .It tcp        sack.enable     integer yes
                   1294: .It tcp        sack.globalholes        integer no
                   1295: .It tcp        sack.globalmaxholes     integer yes
                   1296: .It tcp        sack.maxholes   integer yes
                   1297: .It tcp        ecn.enable      integer yes
                   1298: .It tcp        ecn.maxretries  integer yes
                   1299: .It tcp        congctl.selected        string  yes
                   1300: .It tcp        congctl.available       string  yes
                   1301: .It tcp        abc.enable      integer yes
                   1302: .It tcp        abc.aggressive  integer yes
                   1303: .It udp        checksum        integer yes
                   1304: .It udp        do_loopback_cksum       integer yes
                   1305: .It udp        recvspace       integer yes
                   1306: .It udp        sendspace       integer yes
                   1307: .El
                   1308: .Pp
                   1309: The variables are as follows:
                   1310: .Bl -tag -width "123456"
                   1311: .It Li arp.down
                   1312: Failed ARP entry lifetime.
                   1313: .It Li arp.keep
                   1314: Valid ARP entry lifetime.
                   1315: .It Li arp.prune
                   1316: ARP cache pruning interval.
                   1317: .It Li arp.refresh
                   1318: ARP entry refresh interval.
                   1319: .It Li carp.allow
                   1320: If set to 0, incoming
                   1321: .Xr carp 4
                   1322: packets will not be processed.
                   1323: If set to any other value, processing will occur.
                   1324: Enabled by default.
                   1325: .It Li carp.arpbalance
                   1326: If set to any value other than 0, the ARP balancing functionality of
                   1327: .Xr carp 4
                   1328: is enabled.
                   1329: When ARP requests are received for an IP address which is part of any virtual
                   1330: host, carp will hash the source IP in the ARP request to select one of the
                   1331: virtual hosts from the set of all the virtual hosts which have that IP address.
                   1332: The master of that host will respond with the correct virtual MAC address.
                   1333: Disabled by default.
                   1334: .It Li carp.log
                   1335: If set to any value other than 0,
                   1336: .Xr carp 4
                   1337: will log errors.
                   1338: Disabled by default.
                   1339: .It Li carp.preempt
                   1340: If set to 0,
                   1341: .Xr carp 4
                   1342: will not attempt to become master if it is receiving advertisements from
                   1343: another active master.
                   1344: If set to any other value, carp will become master of the virtual host if it
                   1345: believes it can send advertisements more frequently than the current master.
                   1346: Disabled by default.
                   1347: .It Li ip.allowsrcrt
                   1348: If set to 1, the host accepts source routed packets.
1.72      christos 1349: .It Li ip.anonportalgo.available
                   1350: The available RFC 6056 port randomization algorithms.
1.74      christos 1351: .It Li ip.anonportalgo.reserve
                   1352: A bitmask of ports that will not be used during anonymous or privileged
                   1353: port selection.
1.72      christos 1354: .It Li ip.anonportalgo.selected
                   1355: The currently selected RFC 6056 port randomization algorithm.
1.1       pavel    1356: .It Li ip.anonportmax
                   1357: The highest port number to use for TCP and UDP ephemeral port allocation.
                   1358: This cannot be set to less than 1024 or greater than 65535, and must
                   1359: be greater than
                   1360: .Li ip.anonportmin .
                   1361: .It Li ip.anonportmin
                   1362: The lowest port number to use for TCP and UDP ephemeral port allocation.
                   1363: This cannot be set to less than 1024 or greater than 65535.
                   1364: .It Li ip.checkinterface
                   1365: If set to non-zero, the host will reject packets addressed to it
                   1366: that arrive on an interface not bound to that address.
                   1367: Currently, this must be disabled if ipnat is used to translate the
                   1368: destination address to another local interface, or if addresses
                   1369: are added to the loopback interface instead of the interface where
                   1370: the packets for those packets are received.
                   1371: .It Li ip.directed-broadcast
                   1372: If set to 1, enables directed broadcast behavior for the host.
                   1373: .It Li ip.do_loopback_cksum
                   1374: Perform IP checksum on loopback.
                   1375: .It Li ip.forwarding
                   1376: If set to 1, enables IP forwarding for the host,
                   1377: meaning that the host is acting as a router.
                   1378: .It Li ip.forwsrcrt
                   1379: If set to 1, enables forwarding of source-routed packets for the host.
                   1380: This value may only be changed if the kernel security level is less than 1.
                   1381: .It Li ip.gifttl
                   1382: The maximum time-to-live (hop count) value for an IPv4 packet generated by
                   1383: .Xr gif 4
                   1384: tunnel interface.
                   1385: .It Li ip.grettl
                   1386: The maximum time-to-live (hop count) value for an IPv4 packet generated by
                   1387: .Xr gre 4
                   1388: tunnel interface.
1.8       liamjfoy 1389: .It Li ip.hashsize
                   1390: The size of IPv4 Fast Forward hash table.
                   1391: This value must be a power of 2 (64, 256...).
                   1392: A larger hash table size results in fewer collisions.
                   1393: Also see
                   1394: .Li ip.maxflows .
1.1       pavel    1395: .It Li ip.hostzerobroadcast
                   1396: All zeroes address is broadcast address.
                   1397: .It Li ip.lowportmax
                   1398: The highest port number to use for TCP and UDP reserved port allocation.
                   1399: This cannot be set to less than 0 or greater than 1024, and must
                   1400: be greater than
                   1401: .Li ip.lowportmin .
                   1402: .It Li ip.lowportmin
                   1403: The lowest port number to use for TCP and UDP reserved port allocation.
                   1404: This cannot be set to less than 0 or greater than 1024, and must
                   1405: be smaller than
                   1406: .Li ip.lowportmax .
                   1407: .It Li ip.maxflows
1.5       liamjfoy 1408: IPv4 Fast Forwarding is enabled by default.
                   1409: If set to 0, IPv4 Fast Forwarding is disabled.
1.1       pavel    1410: .Li ip.maxflows
                   1411: controls the maximum amount of flows which can be created.
                   1412: The default value is 256.
                   1413: .It Li ip.maxfragpackets
                   1414: The maximum number of fragmented packets the node will accept.
                   1415: 0 means that the node will not accept any fragmented packets.
                   1416: \-1 means that the node will accept as many fragmented packets as it receives.
                   1417: The flag is provided basically for avoiding possible DoS attacks.
                   1418: .It Li ip.mtudisc
                   1419: If set to 1, enables Path MTU Discovery (RFC 1191).
                   1420: When Path MTU Discovery is enabled, the transmitted TCP segment
                   1421: size will be determined by the advertised maximum segment size
                   1422: (MSS) from the remote end, as constrained by the path MTU.
                   1423: If MTU Discovery is disabled, the transmitted segment size will
                   1424: never be greater than
                   1425: .Li tcp.mssdflt
                   1426: (the local maximum segment size).
                   1427: .It Li ip.mtudisctimeout
                   1428: The number of seconds in which a route added by the Path MTU
                   1429: Discovery engine will time out.
                   1430: When the route times out, the Path
                   1431: MTU Discovery engine will attempt to probe a larger path MTU.
                   1432: .It Li ip.random_id
                   1433: Assign random ip_id values.
                   1434: .It Li ip.redirect
                   1435: If set to 1, ICMP redirects may be sent by the host.
                   1436: This option is ignored unless the host is routing IP packets,
                   1437: and should normally be enabled on all systems.
                   1438: .It Li ip.subnetsarelocal
                   1439: If set to 1, subnets are to be considered local addresses.
                   1440: .It Li ip.ttl
                   1441: The maximum time-to-live (hop count) value for an IP packet sourced by
                   1442: the system.
                   1443: This value applies to normal transport protocols, not to ICMP.
                   1444: .It Li icmp.errppslimit
                   1445: The variable specifies the maximum number of outgoing ICMP error messages,
                   1446: per second.
                   1447: ICMP error messages that exceeded the value are subject to rate limitation
                   1448: and will not go out from the node.
                   1449: Negative value disables rate limitation.
                   1450: .It Li icmp.maskrepl
                   1451: If set to 1, ICMP network mask requests are to be answered.
                   1452: .It Li icmp.rediraccept
                   1453: If set to non-zero, the host will accept ICMP redirect packets.
                   1454: Note that routers will never accept ICMP redirect packets,
                   1455: and the variable is meaningful on IP hosts only.
                   1456: .It Li icmp.redirtimeout
                   1457: The variable specifies lifetime of routing entries generated by incoming
                   1458: ICMP redirect.
                   1459: This defaults to 600 seconds.
                   1460: .It Li icmp.returndatabytes
                   1461: Number of bytes to return in an ICMP error message.
1.28      christos 1462: .It Li icmp.bmcastecho
                   1463: If set to 1, enables responding to ICMP echo or timestamp request to the
                   1464: broadcast address.
1.1       pavel    1465: .It Li tcp.ack_on_push
                   1466: If set to 1, TCP is to immediately transmit an ACK upon reception of
                   1467: a packet with PUSH set.
                   1468: This can avoid losing a round trip time in some rare situations,
                   1469: but has the caveat of potentially defeating TCP's delayed ACK algorithm.
                   1470: Use of this option is generally not recommended, but
                   1471: the variable exists in case your configuration really needs it.
                   1472: .It Li tcp.compat_42
                   1473: If set to 1, enables work-arounds for bugs in the 4.2BSD TCP implementation.
                   1474: Use of this option is not recommended, although it may be
                   1475: required in order to communicate with extremely old TCP implementations.
                   1476: .It Li tcp.cwm
                   1477: If set to 1, enables use of the Hughes/Touch/Heidemann Congestion Window
                   1478: Monitoring algorithm.
                   1479: This algorithm prevents line-rate bursts of packets that could
                   1480: otherwise occur when data begins flowing on an idle TCP connection.
                   1481: These line-rate bursts can contribute to network and router congestion.
                   1482: This can be particularly useful on World Wide Web servers
                   1483: which support HTTP/1.1, which has lingering connections.
                   1484: .It Li tcp.cwm_burstsize
                   1485: The Congestion Window Monitoring allowed burst size, in terms
                   1486: of packet count.
                   1487: .It Li tcp.delack_ticks
                   1488: Number of ticks to delay sending an ACK.
                   1489: .It Li tcp.do_loopback_cksum
                   1490: Perform TCP checksum on loopback.
                   1491: .It Li tcp.init_win
1.76      wiz      1492: A value indicating the TCP initial congestion window.
                   1493: The valid range
1.87      matt     1494: is 0 to 10 (maximum specified by RFC6928),
1.75      christos 1495: with a default of 4 (approximately 4K per RFC3390).
1.1       pavel    1496: .It Li tcp.init_win_local
                   1497: Like
                   1498: .Li tcp.init_win ,
                   1499: but used when communicating with hosts on a local network.
                   1500: .It Li tcp.keepcnt
                   1501: Number of keepalive probes sent before declaring a connection dead.
                   1502: If set to zero, there is no limit;
                   1503: keepalives will be sent until some kind of
                   1504: response is received from the peer.
                   1505: .It Li tcp.keepidle
                   1506: Time a connection must be idle before keepalives are sent (if keepalives
                   1507: are enabled for the connection).
                   1508: See also tcp.slowhz.
                   1509: .It Li tcp.keepintvl
                   1510: Time after a keepalive probe is sent until, in the absence of any response,
                   1511: another probe is sent.
                   1512: See also tcp.slowhz.
                   1513: .It Li tcp.log_refused
                   1514: If set to 1, refused TCP connections to the host will be logged.
1.12      christos 1515: .It Li tcp.keepinit
                   1516: Timeout in seconds during connection establishment.
1.1       pavel    1517: .It Li tcp.mss_ifmtu
                   1518: If set to 1, TCP calculates the outgoing maximum segment size based on
                   1519: the MTU of the appropriate interface.
                   1520: If set to 0, it is calculated based on the greater of the MTU of the
                   1521: interface, and the largest (non-loopback) interface MTU on the system.
                   1522: .It Li tcp.mssdflt
                   1523: The default maximum segment size both advertised to the peer
                   1524: and to use when either the peer does not advertise a maximum segment size to
                   1525: us during connection setup or Path MTU Discovery
                   1526: .Li ( ip.mtudisc )
                   1527: is disabled.
                   1528: Do not change this value unless you really know what you are doing.
                   1529: .It Li tcp.recvspace
                   1530: The default TCP receive buffer size.
                   1531: .It Li tcp.rfc1323
                   1532: If set to 1, enables RFC 1323 extensions to TCP.
                   1533: .It Li tcp.rstppslimit
                   1534: The variable specifies the maximum number of outgoing TCP RST packets,
                   1535: per second.
                   1536: TCP RST packet that exceeded the value are subject to rate limitation
                   1537: and will not go out from the node.
                   1538: Negative value disables rate limitation.
1.13      christos 1539: .It Li tcp.ident
                   1540: Return the user ID of a connected socket pair.
                   1541: (RFC1413 Identification Protocol lookups.)
                   1542: .It Li tcp.drop
                   1543: Drop a TCP socket pair connection.
1.1       pavel    1544: .It Li tcp.sack.enable
                   1545: If set to 1, enables RFC 2018 Selective ACKnowledgement.
                   1546: .It Li tcp.sack.globalholes
                   1547: Global number of TCP SACK holes.
                   1548: .It Li tcp.sack.globalmaxholes
                   1549: Global maximum number of TCP SACK holes.
                   1550: .It Li tcp.sack.maxholes
                   1551: Maximum number of TCP SACK holes allowed per connection.
                   1552: .It Li tcp.ecn.enable
                   1553: If set to 1, enables RFC 3168 Explicit Congestion Notification.
                   1554: .It Li tcp.ecn.maxretries
                   1555: Number of times to retry sending the ECN-setup packet.
                   1556: .It Li tcp.sendspace
                   1557: The default TCP send buffer size.
                   1558: .It Li tcp.slowhz
                   1559: The units for tcp.keepidle and tcp.keepintvl; those variables are in ticks
                   1560: of a clock that ticks tcp.slowhz times per second.
                   1561: (That is, their values
                   1562: must be divided by the tcp.slowhz value to get times in seconds.)
                   1563: .It Li tcp.syn_bucket_limit
                   1564: The maximum number of entries allowed per hash bucket in the TCP
                   1565: compressed state engine.
                   1566: .It Li tcp.syn_cache_limit
                   1567: The maximum number of entries allowed in the TCP compressed state
                   1568: engine.
                   1569: .It Li tcp.timestamps
                   1570: If rfc1323 is enabled, a value of 1 indicates RFC 1323 time stamp options,
                   1571: used for measuring TCP round trip times, are enabled.
                   1572: .It Li tcp.win_scale
                   1573: If rfc1323 is enabled, a value of 1 indicates RFC 1323 window scale options,
                   1574: for increasing the TCP window size, are enabled.
                   1575: .It Li tcp.congctl.available
                   1576: The available TCP congestion control algorithms.
                   1577: .It Li tcp.congctl.selected
                   1578: The currently selected TCP congestion control algorithm.
                   1579: .It Li tcp.abc.enable
                   1580: If set to 1, use RFC 3465 Appropriate Byte Counting (ABC).
                   1581: If set to 0, use traditional Packet Counting.
                   1582: .It Li tcp.abc.aggressive
                   1583: Choose the L parameter found in RFC 3465.
                   1584: L is the maximum cwnd increase for an ack during slow start.
                   1585: If set to 1, use L=2*SMSS.
                   1586: If set to 0, use L=1*SMSS.
                   1587: It has no effect unless tcp.abc.enable is set to 1.
                   1588: .It Li udp.checksum
                   1589: If set to 1, UDP checksums are being computed.
                   1590: Received non-zero UDP checksums are always checked.
                   1591: Disabling UDP checksums is strongly discouraged.
1.67      christos 1592: .It Li udp.recvspace
                   1593: The default UDP receive buffer size.
1.1       pavel    1594: .It Li udp.sendspace
                   1595: The default UDP send buffer size.
                   1596: .El
                   1597: .Pp
                   1598: For variables net.*.ipsec, please refer to
                   1599: .Xr ipsec 4 .
1.91      kamil    1600: .It Li net.inet6 ( Dv PF_INET6 )
1.1       pavel    1601: Get or set various global information about the IPv6
                   1602: .Pq Internet Protocol version 6 .
                   1603: The third level name is the protocol.
                   1604: The fourth level name is the variable name.
                   1605: The currently defined protocols and names are:
1.92      wiz      1606: .Bl -column "Protocol" "anonportalgo.available" "integer" "Changeable" -offset indent
                   1607: .It Sy Protocol        Variable        Sy Type Sy Changeable
1.1       pavel    1608: .It icmp6      errppslimit     integer yes
                   1609: .It icmp6      mtudisc_hiwat   integer yes
                   1610: .It icmp6      mtudisc_lowat   integer yes
                   1611: .It icmp6      nd6_debug       integer yes
                   1612: .It icmp6      nd6_delay       integer yes
                   1613: .It icmp6      nd6_maxnudhint  integer yes
                   1614: .It icmp6      nd6_mmaxtries   integer yes
                   1615: .It icmp6      nd6_prune       integer yes
                   1616: .It icmp6      nd6_umaxtries   integer yes
                   1617: .It icmp6      nd6_useloopback integer yes
                   1618: .It icmp6      nodeinfo        integer yes
                   1619: .It icmp6      rediraccept     integer yes
                   1620: .It icmp6      redirtimeout    integer yes
                   1621: .It ip6        accept_rtadv    integer yes
1.96      christos 1622: .It ip6        addctlpolicy    struct in6_addrpolicy   no
1.72      christos 1623: .It ip6        anonportalgo.selected   string  yes
                   1624: .It ip6        anonportalgo.available  string  yes
1.90      kamil    1625: .It ip6        anonportalgo.reserve    struct  yes
1.1       pavel    1626: .It ip6        anonportmax     integer yes
                   1627: .It ip6        anonportmin     integer yes
                   1628: .It ip6        auto_flowlabel  integer yes
                   1629: .It ip6        dad_count       integer yes
                   1630: .It ip6        defmcasthlim    integer yes
                   1631: .It ip6        forwarding      integer yes
                   1632: .It ip6        gifhlim integer yes
1.7       liamjfoy 1633: .It ip6        hashsize        integer yes
1.1       pavel    1634: .It ip6        hlim    integer yes
                   1635: .It ip6        hdrnestlimit    integer yes
                   1636: .It ip6        kame_version    string  no
                   1637: .It ip6        keepfaith       integer yes
                   1638: .It ip6        log_interval    integer yes
                   1639: .It ip6        lowportmax      integer yes
                   1640: .It ip6        lowportmin      integer yes
1.73      christos 1641: .It ip6        maxdynroutes    integer yes
                   1642: .It ip6        maxifprefixes   integer yes
                   1643: .It ip6        maxifdefrouters integer yes
1.5       liamjfoy 1644: .It ip6        maxflows        integer yes
1.1       pavel    1645: .It ip6        maxfragpackets  integer yes
                   1646: .It ip6        maxfrags        integer yes
1.73      christos 1647: .It ip6        neighborgcthresh        integer yes
1.1       pavel    1648: .It ip6        redirect        integer yes
                   1649: .It ip6        rr_prune        integer yes
                   1650: .It ip6        use_deprecated  integer yes
                   1651: .It ip6        v6only  integer yes
                   1652: .It udp6       do_loopback_cksum       integer yes
                   1653: .It udp6       recvspace       integer yes
                   1654: .It udp6       sendspace       integer yes
                   1655: .El
                   1656: .Pp
                   1657: The variables are as follows:
                   1658: .Bl -tag -width "123456"
                   1659: .It Li ip6.accept_rtadv
                   1660: If set to non-zero, the node will accept ICMPv6 router advertisement packets
                   1661: and autoconfigures address prefixes and default routers.
                   1662: The node must be a host
                   1663: .Pq not a router
                   1664: for the option to be meaningful.
1.72      christos 1665: .It Li ip6.anonportalgo.available
                   1666: The available RFC 6056 port randomization algorithms.
1.74      christos 1667: .It Li ip6.anonportalgo.reserve
                   1668: A bitmask of ports that will not be used during anonymous or privileged
                   1669: port selection.
1.72      christos 1670: .It Li ip6.anonportalgo.selected
                   1671: The currently selected RFC 6056 port randomization algorithm.
1.1       pavel    1672: .It Li ip6.anonportmax
                   1673: The highest port number to use for TCP and UDP ephemeral port allocation.
                   1674: This cannot be set to less than 1024 or greater than 65535, and must
                   1675: be greater than
                   1676: .Li ip6.anonportmin .
                   1677: .It Li ip6.anonportmin
                   1678: The lowest port number to use for TCP and UDP ephemeral port allocation.
                   1679: This cannot be set to less than 1024 or greater than 65535.
                   1680: .It Li ip6.auto_flowlabel
                   1681: On connected transport protocol packets,
                   1682: fill IPv6 flowlabel field to help intermediate routers to identify packet flows.
                   1683: .It Li ip6.dad_count
                   1684: The variable configures number of IPv6 DAD
                   1685: .Pq duplicated address detection
                   1686: probe packets.
                   1687: The packets will be generated when IPv6 interface addresses are configured.
                   1688: .It Li ip6.defmcasthlim
                   1689: The default hop limit value for an IPv6 multicast packet sourced by the node.
                   1690: This value applies to all the transport protocols on top of IPv6.
                   1691: There are APIs to override the value, as documented in
                   1692: .Xr ip6 4 .
                   1693: .It Li ip6.forwarding
                   1694: If set to 1, enables IPv6 forwarding for the node,
                   1695: meaning that the node is acting as a router.
                   1696: If set to 0, disables IPv6 forwarding for the node,
                   1697: meaning that the node is acting as a host.
                   1698: IPv6 specification defines node behavior for
                   1699: .Dq router
                   1700: case and
                   1701: .Dq host
                   1702: case quite differently, and changing this variable during operation
                   1703: may cause serious trouble.
                   1704: It is recommended to configure the variable at bootstrap time,
                   1705: and bootstrap time only.
                   1706: .It Li ip6.gifhlim
                   1707: The maximum hop limit value for an IPv6 packet generated by
                   1708: .Xr gif 4
                   1709: tunnel interface.
                   1710: .It Li ip6.hdrnestlimit
                   1711: The number of IPv6 extension headers permitted on incoming IPv6 packets.
                   1712: If set to 0, the node will accept as many extension headers as possible.
1.7       liamjfoy 1713: .It Li ip6.hashsize
                   1714: The size of IPv6 Fast Forward hash table.
1.56      uwe      1715: This value must be a power of 2 (64, 256, ...).
1.7       liamjfoy 1716: A larger hash table size results in fewer collisions.
                   1717: Also see
                   1718: .Li ip6.maxflows .
1.1       pavel    1719: .It Li ip6.hlim
                   1720: The default hop limit value for an IPv6 unicast packet sourced by the node.
                   1721: This value applies to all the transport protocols on top of IPv6.
                   1722: There are APIs to override the value, as documented in
                   1723: .Xr ip6 4 .
                   1724: .It Li ip6.kame_version
                   1725: The string identifies the version of KAME IPv6 stack implemented in the kernel.
                   1726: .It Li ip6.keepfaith
                   1727: If set to non-zero, it enables
                   1728: .Dq FAITH
                   1729: TCP relay IPv6-to-IPv4 translator code in the kernel.
                   1730: Refer
                   1731: .Xr faith 4
                   1732: and
                   1733: .Xr faithd 8
                   1734: for detail.
                   1735: .It Li ip6.log_interval
                   1736: The variable controls amount of logs generated by IPv6 packet
                   1737: forwarding engine, by setting interval between log output
                   1738: .Pq in seconds .
                   1739: .It Li ip6.lowportmax
                   1740: The highest port number to use for TCP and UDP reserved port allocation.
                   1741: This cannot be set to less than 0 or greater than 1024, and must
                   1742: be greater than
                   1743: .Li ip6.lowportmin .
                   1744: .It Li ip6.lowportmin
                   1745: The lowest port number to use for TCP and UDP reserved port allocation.
                   1746: This cannot be set to less than 0 or greater than 1024, and must
                   1747: be smaller than
                   1748: .Li ip6.lowportmax .
1.73      christos 1749: .It Li ip6.maxdynroutes
                   1750: Maximum number of routes created by redirect.
                   1751: Set it to negative to disable.
                   1752: The default value is 4096.
                   1753: .It Li ip6.maxifprefixes
                   1754: Maximum number of prefixes created by route advertisements per interface.
                   1755: Set it to negative to disable.
                   1756: The default value is 16.
                   1757: .It Li ip6.maxifdefrouters 16
                   1758: Maximum number of default routers created by route advertisements per interface.
                   1759: Set it to negative to disable.
                   1760: The default value is 16.
1.5       liamjfoy 1761: .It Li ip6.maxflows
                   1762: IPv6 Fast Forwarding is enabled by default.
                   1763: If set to 0, IPv6 Fast Forwarding is disabled.
                   1764: .Li ip6.maxflows
                   1765: controls the maximum amount of flows which can be created.
1.6       liamjfoy 1766: The default value is 256.
1.1       pavel    1767: .It Li ip6.maxfragpackets
                   1768: The maximum number of fragmented packets the node will accept.
                   1769: 0 means that the node will not accept any fragmented packets.
                   1770: \-1 means that the node will accept as many fragmented packets as it receives.
                   1771: The flag is provided basically for avoiding possible DoS attacks.
                   1772: .It Li ip6.maxfrags
                   1773: The maximum number of fragments the node will accept.
                   1774: 0 means that the node will not accept any fragments.
                   1775: \-1 means that the node will accept as many fragments as it receives.
                   1776: The flag is provided basically for avoiding possible DoS attacks.
1.73      christos 1777: .It Li ip6.neighborgcthresh
                   1778: Maximum number of entries in neighbor cache.
                   1779: Set to negative to disable.
                   1780: The default value is 2048.
1.1       pavel    1781: .It Li ip6.redirect
                   1782: If set to 1, ICMPv6 redirects may be sent by the node.
                   1783: This option is ignored unless the node is routing IP packets,
                   1784: and should normally be enabled on all systems.
                   1785: .It Li ip6.rr_prune
                   1786: The variable specifies interval between IPv6 router renumbering prefix
                   1787: babysitting, in seconds.
                   1788: .It Li ip6.use_deprecated
                   1789: The variable controls use of deprecated address, specified in RFC 2462 5.5.4.
                   1790: .It Li ip6.v6only
                   1791: The variable specifies initial value for
                   1792: .Dv IPV6_V6ONLY
                   1793: socket option for
                   1794: .Dv AF_INET6
                   1795: socket.
                   1796: Please refer to
                   1797: .Xr ip6 4
                   1798: for detail.
                   1799: .It Li icmp6.errppslimit
                   1800: The variable specifies the maximum number of outgoing ICMPv6 error messages,
                   1801: per second.
                   1802: ICMPv6 error messages that exceeded the value are subject to rate limitation
                   1803: and will not go out from the node.
                   1804: Negative value disables rate limitation.
                   1805: .It Li icmp6.mtudisc_hiwat
                   1806: .It Li icmp6.mtudisc_lowat
                   1807: The variables define the maximum number of routing table entries,
                   1808: created due to path MTU discovery
                   1809: .Pq prevents denial-of-service attacks with ICMPv6 too big messages .
                   1810: When IPv6 path MTU discovery happens, we keep path MTU information into
                   1811: the routing table.
                   1812: If the number of routing table entries exceed the value,
                   1813: the kernel will not attempt to keep the path MTU information.
                   1814: .Li icmp6.mtudisc_hiwat
                   1815: is used when we have verified ICMPv6 too big messages.
                   1816: .Li icmp6.mtudisc_lowat
                   1817: is used when we have unverified ICMPv6 too big messages.
                   1818: Verification is performed by using address/port pairs kept in connected pcbs.
                   1819: Negative value disables the upper limit.
                   1820: .It Li icmp6.nd6_debug
                   1821: If set to non-zero, kernel IPv6 neighbor discovery code will generate
                   1822: debugging messages.
                   1823: The debug outputs are useful to diagnose IPv6 interoperability issues.
                   1824: The flag must be set to 0 for normal operation.
                   1825: .It Li icmp6.nd6_delay
                   1826: The variable specifies
                   1827: .Dv DELAY_FIRST_PROBE_TIME
                   1828: timing constant in IPv6 neighbor discovery specification
                   1829: .Pq RFC 2461 ,
                   1830: in seconds.
                   1831: .It Li icmp6.nd6_maxnudhint
                   1832: IPv6 neighbor discovery permits upper layer protocols to supply reachability
                   1833: hints, to avoid unnecessary neighbor discovery exchanges.
                   1834: The variable defines the number of consecutive hints the neighbor discovery
                   1835: layer will take.
                   1836: For example, by setting the variable to 3, neighbor discovery layer
                   1837: will take 3 consecutive hints in maximum.
                   1838: After receiving 3 hints, neighbor discovery layer will perform
                   1839: normal neighbor discovery process.
                   1840: .It Li icmp6.nd6_mmaxtries
                   1841: The variable specifies
                   1842: .Dv MAX_MULTICAST_SOLICIT
                   1843: constant in IPv6 neighbor discovery specification
                   1844: .Pq RFC 2461 .
                   1845: .It Li icmp6.nd6_prune
                   1846: The variable specifies interval between IPv6 neighbor cache babysitting,
                   1847: in seconds.
                   1848: .It Li icmp6.nd6_umaxtries
                   1849: The variable specifies
                   1850: .Dv MAX_UNICAST_SOLICIT
                   1851: constant in IPv6 neighbor discovery specification
                   1852: .Pq RFC 2461 .
                   1853: .It Li icmp6.nd6_useloopback
                   1854: If set to non-zero, kernel IPv6 stack will use loopback interface for
                   1855: local traffic.
                   1856: .It Li icmp6.nodeinfo
                   1857: The variable enables responses to ICMPv6 node information queries.
                   1858: If you set the variable to 0, responses will not be generated for
                   1859: ICMPv6 node information queries.
                   1860: Since node information queries can have a security impact, it is
                   1861: possible to fine tune which responses should be answered.
                   1862: Two separate bits can be set.
                   1863: .Bl -tag -width "12345"
                   1864: .It 1
                   1865: Respond to ICMPv6 FQDN queries, e.g.
                   1866: .Li ping6 -w .
                   1867: .It 2
                   1868: Respond to ICMPv6 node addresses queries, e.g.
                   1869: .Li ping6 -a .
                   1870: .El
                   1871: .It Li icmp6.rediraccept
                   1872: If set to non-zero, the host will accept ICMPv6 redirect packets.
                   1873: Note that IPv6 routers will never accept ICMPv6 redirect packets,
                   1874: and the variable is meaningful on IPv6 hosts
                   1875: .Pq non-router
                   1876: only.
                   1877: .It Li icmp6.redirtimeout
                   1878: The variable specifies lifetime of routing entries generated by incoming
                   1879: ICMPv6 redirect.
                   1880: .It Li udp6.do_loopback_cksum
                   1881: Perform UDP checksum on loopback.
                   1882: .It Li udp6.recvspace
                   1883: Default UDP receive buffer size.
                   1884: .It Li udp6.sendspace
                   1885: Default UDP send buffer size.
                   1886: .El
                   1887: .Pp
                   1888: We reuse net.*.tcp for
                   1889: .Tn TCP
                   1890: over
                   1891: .Tn IPv6 ,
                   1892: and therefore we do not have variables net.*.tcp6.
                   1893: Variables net.inet6.udp6 have identical meaning to net.inet.udp.
                   1894: Please refer to
                   1895: .Li PF_INET
                   1896: section above.
                   1897: For variables net.*.ipsec6, please refer to
                   1898: .Xr ipsec 4 .
1.91      kamil    1899: .It Li net.key ( Dv PF_KEY )
1.1       pavel    1900: Get or set various global information about the IPsec key management.
                   1901: The third level name is the variable name.
                   1902: The currently defined variable and names are:
1.21      joerg    1903: .Bl -column "blockacq_lifetime" "integer" "Changeable" -offset indent
1.92      wiz      1904: .It Sy Variable        Type    Sy Changeable
1.1       pavel    1905: .It debug      integer yes
1.80      christos 1906: .It enabled    integer yes
                   1907: .It used       integer no
1.1       pavel    1908: .It spi_try    integer yes
                   1909: .It spi_min_value      integer yes
                   1910: .It spi_max_value      integer yes
                   1911: .It larval_lifetime    integer yes
                   1912: .It blockacq_count     integer yes
                   1913: .It blockacq_lifetime  integer yes
                   1914: .It esp_keymin integer yes
                   1915: .It esp_auth   integer yes
                   1916: .It ah_keymin  integer yes
                   1917: .El
1.21      joerg    1918: .Pp
1.1       pavel    1919: The variables are as follows:
                   1920: .Bl -tag -width "123456"
                   1921: .It Li debug
                   1922: Turn on debugging message from within the kernel.
                   1923: The value is a bitmap, as defined in
1.56      uwe      1924: .In netkey/key_debug.h .
1.80      christos 1925: .It Li enabled
1.81      christos 1926: Control processing of IPsec control messages.
                   1927: .Bl -tag -width indent
                   1928: .It 0
                   1929: Never allow IPsec processing
                   1930: .It 1
                   1931: Allow IPsec processing when SPD policies are present.
                   1932: .It 2
                   1933: Force IPsec processing even when SPD policies are not present.
                   1934: .El
1.80      christos 1935: .It Li used
                   1936: Based on if IPsec is enabled, and SPD rule existance, show if
                   1937: IPsec is being used.
                   1938: Note that currenly once IPsec is being used, it cannot be disabled.
1.1       pavel    1939: .It Li spi_try
                   1940: The number of times the kernel will try to obtain an unique SPI
                   1941: when it generates it from random number generator.
                   1942: .It Li spi_min_value
                   1943: Minimum SPI value when generating it within the kernel.
                   1944: .It Li spi_max_value
                   1945: Maximum SPI value when generating it within the kernel.
                   1946: .It Li larval_lifetime
                   1947: Lifetime for LARVAL SAD entries, in seconds.
                   1948: .It Li blockacq_count
                   1949: Number of ACQUIRE PF_KEY messages to be blocked after an ACQUIRE message.
                   1950: It avoids flood of ACQUIRE PF_KEY from being sent from the kernel to the
                   1951: key management daemon.
                   1952: .It Li blockacq_lifetime
                   1953: Lifetime of ACQUIRE PF_KEY message.
                   1954: .It Li esp_keymin
                   1955: Minimum ESP key length, in bits.
                   1956: The value is used when the kernel creates proposal payload
                   1957: on ACQUIRE PF_KEY message.
                   1958: .It Li esp_auth
                   1959: Whether ESP authentication should be used or not.
                   1960: Non-zero value indicates that ESP authentication should be used.
                   1961: The value is used when the kernel creates proposal payload
                   1962: on ACQUIRE PF_KEY message.
                   1963: .It Li ah_keymin
                   1964: Minimum AH key length, in bits,
                   1965: The value is used when the kernel creates proposal payload
                   1966: on ACQUIRE PF_KEY message.
                   1967: .El
                   1968: .El
1.50      jruoho   1969: .Ss The proc.* subtree
1.1       pavel    1970: The string and integer information available for the
                   1971: .Li proc
                   1972: level is detailed below.
                   1973: The changeable column shows whether a process with appropriate
                   1974: privilege may change the value.
                   1975: These values are per-process,
                   1976: and as such may change from one process to another.
                   1977: When a process is created,
                   1978: the default values are inherited from its parent.
                   1979: When a set-user-ID or set-group-ID binary is executed, the
                   1980: value of PROC_PID_CORENAME is reset to the system default value.
                   1981: The second level name is either the magic value PROC_CURPROC, which
                   1982: points to the current process, or the PID of the target process.
1.21      joerg    1983: .Bl -column "proc.pid.corename" "string" "not applicable" -offset indent
1.92      wiz      1984: .It Sy Third level name        Sy Type Sy Changeable
1.1       pavel    1985: .It proc.pid.corename  string  yes
                   1986: .It proc.pid.rlimit    node    not applicable
                   1987: .It proc.pid.stopfork  int     yes
                   1988: .It proc.pid.stopexec  int     yes
                   1989: .It proc.pid.stopexit  int     yes
                   1990: .El
                   1991: .Bl -tag -width "123456"
1.91      kamil    1992: .It Li proc.pid.corename ( Dv PROC_PID_CORENAME )
1.1       pavel    1993: The template used for the core dump file name (see
                   1994: .Xr core 5
                   1995: for details).
                   1996: The base name must either be
1.56      uwe      1997: .Pa core
                   1998: or end with the suffix
                   1999: .Pa .core
                   2000: (the super-user may set arbitrary names).
                   2001: By default it points to
                   2002: .Dv KERN_DEFCORENAME .
1.91      kamil    2003: .It Li proc.pid.rlimit ( Dv PROC_PID_LIMIT )
1.1       pavel    2004: Return resources limits, as defined for the
                   2005: .Xr getrlimit 2
                   2006: and
                   2007: .Xr setrlimit 2
                   2008: system calls.
                   2009: The fourth level name is one of:
1.56      uwe      2010: .Bl -tag -width "123456"
1.91      kamil    2011: .It Li proc.pid.rlimit.cputime ( Dv PROC_PID_LIMIT_CPU )
1.1       pavel    2012: The maximum amount of CPU time (in seconds) to be used by each process.
1.91      kamil    2013: .It Li proc.pid.rlimit.filesize ( Dv PROC_PID_LIMIT_FSIZE )
1.1       pavel    2014: The largest size (in bytes) file that may be created.
1.91      kamil    2015: .It Li proc.pid.rlimit.datasize ( Dv PROC_PID_LIMIT_DATA )
1.1       pavel    2016: The maximum size (in bytes) of the data segment for a process;
                   2017: this defines how far a program may extend its break with the
                   2018: .Xr sbrk 2
                   2019: system call.
1.91      kamil    2020: .It Li proc.pid.rlimit.stacksize ( Dv PROC_PID_LIMIT_STACK )
1.1       pavel    2021: The maximum size (in bytes) of the stack segment for a process;
                   2022: this defines how far a program's stack segment may be extended.
                   2023: Stack extension is performed automatically by the system.
1.91      kamil    2024: .It Li proc.pid.rlimit.coredumpsize ( Dv PROC_PID_LIMIT_CORE )
1.1       pavel    2025: The largest size (in bytes)
                   2026: .Pa core
                   2027: file that may be created.
1.91      kamil    2028: .It Li proc.pid.rlimit.memoryuse ( Dv PROC_PID_LIMIT_RSS )
1.1       pavel    2029: The maximum size (in bytes) to which a process's resident set size may
                   2030: grow.
                   2031: This imposes a limit on the amount of physical memory to be given to
                   2032: a process; if memory is tight, the system will prefer to take memory
                   2033: from processes that are exceeding their declared resident set size.
1.91      kamil    2034: .It Li proc.pid.rlimit.memorylocked ( Dv PROC_PID_LIMIT_MEMLOCK )
1.1       pavel    2035: The maximum size (in bytes) which a process may lock into memory
                   2036: using the
                   2037: .Xr mlock 2
                   2038: function.
1.91      kamil    2039: .It Li proc.pid.rlimit.maxproc ( Dv PROC_PID_LIMIT_NPROC )
1.1       pavel    2040: The maximum number of simultaneous processes for this user id.
1.91      kamil    2041: .It Li proc.pid.rlimit.descriptors ( Dv PROC_PID_LIMIT_NOFILE )
1.1       pavel    2042: The maximum number of open files for this process.
1.91      kamil    2043: .It Li proc.pid.rlimit.sbsize ( Dv PROC_PID_LIMIT_SBSIZE )
1.22      snj      2044: The maximum size (in bytes) of the socket buffers
                   2045: set by the
                   2046: .Xr setsockopt 2
                   2047: .Dv SO_RCVBUF
                   2048: and
                   2049: .Dv SO_SNDBUF
                   2050: options.
1.91      kamil    2051: .It Li proc.pid.rlimit.vmemoryuse ( Dv PROC_PID_LIMIT_AS )
1.88      kamil    2052: The maximum size (in bytes) which a process can obtain.
1.91      kamil    2053: .It Li proc.pid.rlimit.maxlwp ( Dv PROC_PID_LIMIT_NTHR )
1.88      kamil    2054: The maximum number of threads that cen be created and running at one time in
                   2055: the process.
                   2056: The first thread of each process is not counted against this.
1.1       pavel    2057: .El
                   2058: .Pp
                   2059: The fifth level name is one of
1.91      kamil    2060: .Li soft ( Dv PROC_PID_LIMIT_TYPE_SOFT )
1.56      uwe      2061: or
1.91      kamil    2062: .Li hard ( Dv PROC_PID_LIMIT_TYPE_HARD ) ,
1.1       pavel    2063: to select respectively the soft or hard limit.
                   2064: Both are of type integer.
1.91      kamil    2065: .It Li proc.pid.stopfork ( Dv PROC_PID_STOPFORK )
1.1       pavel    2066: If non zero, the process' children will be stopped after
                   2067: .Xr fork 2
                   2068: calls.
                   2069: The children is created in the SSTOP state and is never scheduled
                   2070: for running before being stopped.
                   2071: This feature helps attaching a process with a debugger such as
                   2072: .Xr gdb 1
                   2073: before it had the opportunity to actually do anything.
                   2074: .Pp
                   2075: This value is inherited by the process's children, and it also
                   2076: apply to emulation specific system calls that fork a new process, such as
                   2077: .Fn sproc
                   2078: or
                   2079: .Fn clone .
1.91      kamil    2080: .It Li proc.pid.stopexec ( Dv PROC_PID_STOPEXEC )
1.1       pavel    2081: If non zero, the process will be stopped on next
                   2082: .Xr exec 3
                   2083: call.
                   2084: The process created by
                   2085: .Xr exec 3
                   2086: is created in the SSTOP state and is never scheduled for running
                   2087: before being stopped.
                   2088: This feature helps attaching a process with a debugger such as
                   2089: .Xr gdb 1
                   2090: before it had the opportunity to actually do anything.
                   2091: .Pp
                   2092: This value is inherited by the process's children.
1.91      kamil    2093: .It Li proc.pid.stopexit ( Dv PROC_PID_STOPEXIT )
1.1       pavel    2094: If non zero, the process will be stopped on when it has cause to exit,
                   2095: either by way of calling
                   2096: .Xr exit 3 ,
                   2097: .Xr _exit 2 ,
                   2098: or by the receipt of a specific signal.
                   2099: The process is stopped before any of its resources or vm space is
                   2100: released allowing examination of the termination state of a process
                   2101: before it disappears.
                   2102: This feature can be used to examine the final conditions of the
                   2103: process's vmspace via
                   2104: .Xr pmap 1
                   2105: or its resource settings with
                   2106: .Xr sysctl 8
                   2107: before it disappears.
                   2108: .Pp
                   2109: This value is also inherited by the process's children.
                   2110: .El
1.91      kamil    2111: .Ss The user.* subtree ( Dv CTL_USER )
1.1       pavel    2112: The string and integer information available for the
                   2113: .Li user
                   2114: level is detailed below.
                   2115: The changeable column shows whether a process with appropriate
                   2116: privilege may change the value.
1.21      joerg    2117: .Bl -column "user.coll_weights_max" "integer" "Changeable" -offset indent
1.92      wiz      2118: .It Sy Second level name       Sy Type Sy Changeable
1.1       pavel    2119: .It user.atexit_max    integer no
                   2120: .It user.bc_base_max   integer no
                   2121: .It user.bc_dim_max    integer no
                   2122: .It user.bc_scale_max  integer no
                   2123: .It user.bc_string_max integer no
                   2124: .It user.coll_weights_max      integer no
                   2125: .It user.cs_path       string  no
                   2126: .It user.expr_nest_max integer no
                   2127: .It user.line_max      integer no
                   2128: .It user.posix2_c_bind integer no
                   2129: .It user.posix2_c_dev  integer no
                   2130: .It user.posix2_char_term      integer no
                   2131: .It user.posix2_fort_dev       integer no
                   2132: .It user.posix2_fort_run       integer no
                   2133: .It user.posix2_localedef      integer no
                   2134: .It user.posix2_sw_dev integer no
                   2135: .It user.posix2_upe    integer no
                   2136: .It user.posix2_version        integer no
                   2137: .It user.re_dup_max    integer no
                   2138: .It user.stream_max    integer no
                   2139: .It user.stream_max    integer no
                   2140: .It user.tzname_max    integer no
                   2141: .El
                   2142: .Bl -tag -width "123456"
1.91      kamil    2143: .It Li user.atexit_max ( Dv USER_ATEXIT_MAX )
1.1       pavel    2144: The maximum number of functions that may be registered with
                   2145: .Xr atexit 3 .
1.91      kamil    2146: .It Li user.bc_base_max ( Dv USER_BC_BASE_MAX )
1.1       pavel    2147: The maximum ibase/obase values in the
                   2148: .Xr bc 1
                   2149: utility.
1.91      kamil    2150: .It Li user.bc_dim_max ( Dv USER_BC_DIM_MAX )
1.1       pavel    2151: The maximum array size in the
                   2152: .Xr bc 1
                   2153: utility.
1.91      kamil    2154: .It Li user.bc_scale_max ( Dv USER_BC_SCALE_MAX )
1.1       pavel    2155: The maximum scale value in the
                   2156: .Xr bc 1
                   2157: utility.
1.91      kamil    2158: .It Li user.bc_string_max ( Dv USER_BC_STRING_MAX )
1.1       pavel    2159: The maximum string length in the
                   2160: .Xr bc 1
                   2161: utility.
1.91      kamil    2162: .It Li user.coll_weights_max ( Dv USER_COLL_WEIGHTS_MAX )
1.1       pavel    2163: The maximum number of weights that can be assigned to any entry of
                   2164: the LC_COLLATE order keyword in the locale definition file.
                   2165: .It Li user.cs_path ( USER_CS_PATH )
                   2166: Return a value for the
                   2167: .Ev PATH
                   2168: environment variable that finds all the standard utilities.
1.91      kamil    2169: .It Li user.expr_nest_max ( Dv USER_EXPR_NEST_MAX )
1.1       pavel    2170: The maximum number of expressions that can be nested within
                   2171: parenthesis by the
                   2172: .Xr expr 1
                   2173: utility.
1.91      kamil    2174: .It Li user.line_max ( Dv USER_LINE_MAX )
1.1       pavel    2175: The maximum length in bytes of a text-processing utility's input
                   2176: line.
1.91      kamil    2177: .It Li user.posix2_char_term ( Dv USER_POSIX2_CHAR_TERM )
1.1       pavel    2178: Return 1 if the system supports at least one terminal type capable of
1.58      wiz      2179: all operations described in
                   2180: .St -p1003.2 ,
                   2181: otherwise\ 0.
1.91      kamil    2182: .It Li user.posix2_c_bind ( Dv USER_POSIX2_C_BIND )
1.1       pavel    2183: Return 1 if the system's C-language development facilities support the
1.56      uwe      2184: C-Language Bindings Option, otherwise\ 0.
1.91      kamil    2185: .It Li user.posix2_c_dev ( Dv USER_POSIX2_C_DEV )
1.1       pavel    2186: Return 1 if the system supports the C-Language Development Utilities Option,
1.56      uwe      2187: otherwise\ 0.
1.91      kamil    2188: .It Li user.posix2_fort_dev ( Dv USER_POSIX2_FORT_DEV )
1.1       pavel    2189: Return 1 if the system supports the FORTRAN Development Utilities Option,
1.56      uwe      2190: otherwise\ 0.
1.91      kamil    2191: .It Li user.posix2_fort_run ( Dv USER_POSIX2_FORT_RUN )
1.1       pavel    2192: Return 1 if the system supports the FORTRAN Runtime Utilities Option,
1.56      uwe      2193: otherwise\ 0.
1.91      kamil    2194: .It Li user.posix2_localedef ( Dv USER_POSIX2_LOCALEDEF )
1.56      uwe      2195: Return 1 if the system supports the creation of locales, otherwise\ 0.
1.91      kamil    2196: .It Li user.posix2_sw_dev ( Dv USER_POSIX2_SW_DEV )
1.1       pavel    2197: Return 1 if the system supports the Software Development Utilities Option,
1.56      uwe      2198: otherwise\ 0.
1.91      kamil    2199: .It Li user.posix2_upe ( Dv USER_POSIX2_UPE )
1.1       pavel    2200: Return 1 if the system supports the User Portability Utilities Option,
1.56      uwe      2201: otherwise\ 0.
1.91      kamil    2202: .It Li user.posix2_version ( Dv USER_POSIX2_VERSION )
1.58      wiz      2203: The version of
                   2204: .St -p1003.2
                   2205: with which the system attempts to comply.
1.91      kamil    2206: .It Li user.re_dup_max ( Dv USER_RE_DUP_MAX )
1.1       pavel    2207: The maximum number of repeated occurrences of a regular expression
                   2208: permitted when using interval notation.
1.91      kamil    2209: .It Li user.stream_max ( Dv USER_STREAM_MAX )
1.1       pavel    2210: The minimum maximum number of streams that a process may have open
                   2211: at any one time.
1.91      kamil    2212: .It Li user.tzname_max ( Dv USER_TZNAME_MAX )
1.1       pavel    2213: The minimum maximum number of types supported for the name of a
                   2214: timezone.
                   2215: .El
1.91      kamil    2216: .Ss The vm.* subtree ( Dv CTL_VM )
1.1       pavel    2217: The string and integer information available for the
                   2218: .Li vm
                   2219: level is detailed below.
                   2220: The changeable column shows whether a process with appropriate
                   2221: privilege may change the value.
1.21      joerg    2222: .Bl -column "Second level name" "struct uvmexp_sysctl" "Changeable" -offset indent
1.92      wiz      2223: .It Sy Second level name       Sy Type Sy Changeable
1.1       pavel    2224: .It vm.anonmax int     yes
                   2225: .It vm.anonmin int     yes
                   2226: .It vm.bufcache        int     yes
                   2227: .It vm.bufmem  int     no
                   2228: .It vm.bufmem_hiwater  int     yes
                   2229: .It vm.bufmem_lowater  int     yes
                   2230: .It vm.execmax int     yes
                   2231: .It vm.execmin int     yes
                   2232: .It vm.filemax int     yes
                   2233: .It vm.filemin int     yes
                   2234: .It vm.loadavg struct loadavg  no
                   2235: .It vm.maxslp  int     no
                   2236: .It vm.nkmempages      int     no
                   2237: .It vm.uspace  int     no
                   2238: .It vm.uvmexp  struct uvmexp   no
                   2239: .It vm.uvmexp2 struct uvmexp_sysctl    no
                   2240: .It vm.vmmeter struct vmtotal  no
1.93      christos 2241: .It vm.proc.map        struct kinfo_vmentry    no
1.1       pavel    2242: .El
                   2243: .Bl -tag -width "123456"
1.91      kamil    2244: .It Li vm.anonmax ( Dv VM_ANONMAX )
1.1       pavel    2245: The percentage of physical memory which will be reclaimed
                   2246: from other types of memory usage to store anonymous application data.
1.91      kamil    2247: .It Li vm.anonmin ( Dv VM_ANONMIN )
1.1       pavel    2248: The percentage of physical memory which will be always be available for
                   2249: anonymous application data.
1.91      kamil    2250: .It Li vm.bufcache ( Dv VM_BUFCACHE )
1.1       pavel    2251: The percentage of physical memory which will be available
                   2252: for the buffer cache.
1.91      kamil    2253: .It Li vm.bufmem ( Dv VM_BUFMEM )
1.1       pavel    2254: The amount of kernel memory that is being used by the buffer cache.
1.91      kamil    2255: .It Li vm.bufmem_lowater ( Dv VM_BUFMEM_LOWATER )
1.1       pavel    2256: The minimum amount of kernel memory to reserve for the
                   2257: buffer cache.
1.91      kamil    2258: .It Li vm.bufmem_hiwater ( Dv VM_BUFMEM_HIWATER )
1.1       pavel    2259: The maximum amount of kernel memory to be used for the
                   2260: buffer cache.
1.91      kamil    2261: .It Li vm.execmax ( Dv VM_EXECMAX )
1.1       pavel    2262: The percentage of physical memory which will be reclaimed
                   2263: from other types of memory usage to store cached executable data.
1.91      kamil    2264: .It Li vm.execmin ( Dv VM_EXECMIN )
1.1       pavel    2265: The percentage of physical memory which will be always be available for
                   2266: cached executable data.
1.91      kamil    2267: .It Li vm.filemax ( Dv VM_FILEMAX )
1.1       pavel    2268: The percentage of physical memory which will be reclaimed
                   2269: from other types of memory usage to store cached file data.
1.91      kamil    2270: .It Li vm.filemin ( Dv VM_FILEMIN )
1.1       pavel    2271: The percentage of physical memory which will be always be available for
                   2272: cached file data.
1.91      kamil    2273: .It Li vm.loadavg ( Dv VM_LOADAVG )
1.1       pavel    2274: Return the load average history.
                   2275: The returned data consists of a
1.56      uwe      2276: .Vt struct loadavg .
1.91      kamil    2277: .It Li vm.maxslp ( Dv VM_MAXSLP )
1.1       pavel    2278: The value of the maxslp kernel global variable.
1.91      kamil    2279: .It Li vm.vmmeter ( Dv VM_METER )
1.1       pavel    2280: Return system wide virtual memory statistics.
                   2281: The returned data consists of a
1.56      uwe      2282: .Vt struct vmtotal .
1.31      drochner 2283: .It vm.user_va0_disable
1.56      uwe      2284: A flag which controls whether user processes can map virtual address\ 0.
1.93      christos 2285: .It Li vm.proc.map ( Dv VM_PROC )
1.94      wiz      2286: The third level is
1.93      christos 2287: .dv VM_PROC_MAP ,
                   2288: the fourth is the pid of the process to display the vm object entries for, and
                   2289: the fifth is the size of
                   2290: .Vt struct kinfo_vmentry .
                   2291: Returns an array of
                   2292: .Vt struct kinfo_vmentry
                   2293: objects.
1.91      kamil    2294: .It Li vm.uspace ( Dv VM_USPACE )
1.1       pavel    2295: The number of bytes allocated for each kernel stack.
1.91      kamil    2296: .It Li vm.uvmexp ( Dv VM_UVMEXP )
1.1       pavel    2297: Return system wide virtual memory statistics.
                   2298: The returned data consists of a
1.56      uwe      2299: .Vt struct uvmexp .
1.91      kamil    2300: .It Li vm.uvmexp2 ( Dv VM_UVMEXP2 )
1.1       pavel    2301: Return system wide virtual memory statistics.
                   2302: The returned data consists of a
1.56      uwe      2303: .Vt struct uvmexp_sysctl .
1.1       pavel    2304: .\" XXX vm.idlezero
                   2305: .El
1.91      kamil    2306: .Ss The ddb.* subtree ( Dv CTL_DDB )
1.34      jruoho   2307: The information available for the
1.1       pavel    2308: .Li ddb
                   2309: level is detailed below.
                   2310: The changeable column shows whether a process with appropriate
                   2311: privilege may change the value.
                   2312: .\" XXX sort
1.21      joerg    2313: .Bl -column "Second level name" "integer" "Changeable" -offset indent
1.92      wiz      2314: .It Sy Second level name       Sy Type Sy Changeable
1.1       pavel    2315: .It ddb.radix  integer yes
                   2316: .It ddb.maxoff integer yes
1.34      jruoho   2317: .It ddb.maxwidth       integer yes
1.1       pavel    2318: .It ddb.lines  integer yes
                   2319: .It ddb.tabstops       integer yes
                   2320: .It ddb.onpanic        integer yes
                   2321: .It ddb.fromconsole    integer yes
1.34      jruoho   2322: .It ddb.tee_msgbuf     integer yes
                   2323: .It ddb.commandonenter string  yes
1.1       pavel    2324: .El
                   2325: .Bl -tag -width "123456"
1.91      kamil    2326: .It Li ddb.radix ( Dv DDBCTL_RADIX )
1.1       pavel    2327: The input and output radix.
1.91      kamil    2328: .It Li ddb.maxoff ( Dv DDBCTL_MAXOFF )
1.1       pavel    2329: The maximum symbol offset.
1.91      kamil    2330: .It Li ddb.maxwidth ( Dv DDBCTL_MAXWIDTH )
1.34      jruoho   2331: The maximum output line width.
1.91      kamil    2332: .It Li ddb.lines ( Dv DDBCTL_LINES )
1.1       pavel    2333: Number of display lines.
1.91      kamil    2334: .It Li ddb.tabstops ( Dv DDBCTL_TABSTOPS )
1.1       pavel    2335: Tab width.
1.91      kamil    2336: .It Li ddb.onpanic ( Dv DDBCTL_ONPANIC )
1.63      riz      2337: If greater than zero, DDB will be entered if the kernel panics.
                   2338: A value of 1 causes the system to enter DDB on panic, while a value of 2
                   2339: causes the kernel to attempt to print out a stack trace before entering DDB.
                   2340: A value of 0 causes the kernel to attempt to print a stack trace, then
1.64      wiz      2341: reboot, while a value of \-1 means neither a stack trace will be printed
1.63      riz      2342: nor DDB entered.
1.91      kamil    2343: .It Li ddb.fromconsole ( Dv DDBCTL_FROMCONSOLE )
1.1       pavel    2344: If not zero, DDB may be entered by sending a break on a serial
                   2345: console or by a special key sequence on a graphics console.
1.34      jruoho   2346: .It Li ddb.tee_msgbuf
                   2347: If not zero, DDB will output also to the kernel message buffer.
                   2348: .It Li ddb.commandonenter
                   2349: If not empty, a command to be executed on each enter to the
                   2350: .Tn DDB .
                   2351: .\"
                   2352: .\" XXX: (a) ddb.commandonenter is missing in ddb(4);
                   2353: .\"     (b) No DDBCTL definitions for tee_msgbuf and commandonenter.
1.1       pavel    2354: .El
                   2355: .Pp
1.34      jruoho   2356: Some of these
                   2357: .Tn MIB
                   2358: nodes are also available as variables from within the debugger.
1.1       pavel    2359: See
                   2360: .Xr ddb 4
                   2361: for more details.
1.91      kamil    2362: .Ss The security.* subtree ( Dv CTL_SECURITY )
1.1       pavel    2363: The
                   2364: .Li security
                   2365: level contains various security-related settings for
1.2       wiz      2366: the system.
1.43      jruoho   2367: The available second level names are:
                   2368: .Bl -column "Second level name" "integer" "Changeable" -offset indent
1.92      wiz      2369: .It Sy Second level name       Sy Type Sy Changeable
1.43      jruoho   2370: .It Li security.curtain        integer yes
                   2371: .It Li security.models node    not applicable
                   2372: .It Li security.pax    node    not applicable
                   2373: .El
                   2374: .Pp
1.2       wiz      2375: Available settings are detailed below.
1.1       pavel    2376: .Bl -tag -width "123456"
                   2377: .It Li security.curtain
1.43      jruoho   2378: If non-zero, will filter return objects according to the user
                   2379: .Tn ID
1.95      pgoyette 2380: requesting information about them, preventing users from
                   2381: accessing any objects they do not own.
1.1       pavel    2382: .Pp
                   2383: At the moment, it affects
                   2384: .Xr ps 1 ,
                   2385: .Xr netstat 1
                   2386: (for
                   2387: .Dv PF_INET ,
                   2388: .Dv PF_INET6 ,
                   2389: and
                   2390: .Dv PF_UNIX
                   2391: PCBs), and
                   2392: .Xr w 1 .
1.4       elad     2393: .It Li security.models
                   2394: .Nx
                   2395: supports pluggable security models.
1.17      ad       2396: Every security model used, whether if loaded as a module or built with the system,
1.4       elad     2397: is required to add an entry to this node with at least one element,
                   2398: .Dq name ,
                   2399: indicating the name of the security model.
                   2400: .Pp
                   2401: In addition to the name, any settings and other information private to the
                   2402: security model will be available under this node.
                   2403: See
                   2404: .Xr secmodel 9
                   2405: for more information.
1.1       pavel    2406: .It Li security.pax
                   2407: Settings for PaX -- exploit mitigation features.
1.4       elad     2408: For more information on any of the PaX features, please see
                   2409: .Xr paxctl 8
                   2410: and
1.62      jruoho   2411: .Xr security 7 .
1.43      jruoho   2412: The available third and fourth level names are:
                   2413: .Bl -column "security.pax.segvguard.suspend_timeout" "integer" "Changeable" \
                   2414: -offset 2n
                   2415: .It Sy Third and fourth level names Ta Sy Type Ta Sy Changeable
                   2416: .It Li security.pax.aslr.enabled       integer yes
                   2417: .\".It Li security.pax.aslr.exec_len   integer yes
                   2418: .It Li security.pax.aslr.global        integer yes
                   2419: .\".It Li security.pax.aslr.mmap_len   integer yes
                   2420: .\".It Li security.pax.aslr.stack_len  integer yes
                   2421: .It Li security.pax.mprotect.enabled   integer yes
                   2422: .It Li security.pax.mprotect.global    integer yes
                   2423: .It Li security.pax.segvguard.enabled  integer yes
                   2424: .It Li security.pax.segvguard.expiry_timeout   integer yes
                   2425: .It Li security.pax.segvguard.global   integer yes
                   2426: .It Li security.pax.segvguard.max_crashes      integer yes
                   2427: .It Li security.pax.segvguard.suspend_timeout  integer yes
                   2428: .El
1.1       pavel    2429: .Bl -tag -width "123456"
1.43      jruoho   2430: .It Li security.pax.aslr.enabled
1.14      elad     2431: Enable PaX ASLR (Address Space Layout Randomization).
                   2432: .Pp
                   2433: The value of this
                   2434: knob must be non-zero for PaX ASLR to be enabled, even if a program is set to
                   2435: explicit enable.
1.43      jruoho   2436: .\".It Li security.pax.aslr.exec_len
                   2437: .\" XXX: Undocumented.
1.14      elad     2438: .It Li security.pax.aslr.global
                   2439: Specifies the default global policy for programs without an
                   2440: explicit enable/disable flag.
                   2441: .Pp
                   2442: When non-zero, all programs will get PaX ASLR, except those exempted with
1.69      wiz      2443: .Xr paxctl 8 .
1.14      elad     2444: Otherwise, all programs will not get PaX ASLR, except those specifically
                   2445: marked as such with
                   2446: .Xr paxctl 8 .
1.43      jruoho   2447: .\".It Li security.pax.aslr.mmap_len
                   2448: .\" XXX: Undocumented.
                   2449: .\" .It Li security.pax.aslr.stack_len
                   2450: .\" XXX: Undocumented.
                   2451: .It Li security.pax.mprotect.enabled
1.1       pavel    2452: Enable PaX MPROTECT restrictions.
                   2453: .Pp
                   2454: These are
                   2455: .Xr mprotect 2
1.2       wiz      2456: restrictions to better enforce a W^X policy.
                   2457: The value of this
1.1       pavel    2458: knob must be non-zero for PaX MPROTECT to be enabled, even if a
                   2459: program is set to explicit enable.
                   2460: .It Li security.pax.mprotect.global
                   2461: Specifies the default global policy for programs without an
                   2462: explicit enable/disable flag.
                   2463: .Pp
                   2464: When non-zero, all programs will get the PaX MPROTECT restrictions,
                   2465: except those exempted with
1.69      wiz      2466: .Xr paxctl 8 .
1.1       pavel    2467: Otherwise, all programs will not get the PaX MPROTECT restrictions,
                   2468: except those specifically marked as such with
1.4       elad     2469: .Xr paxctl 8 .
1.43      jruoho   2470: .It Li security.pax.segvguard.enabled
1.1       pavel    2471: Enable PaX Segvguard.
                   2472: .Pp
                   2473: PaX Segvguard can detect and prevent certain exploitation attempts, where
                   2474: an attacker may try for example to brute-force function return addresses
                   2475: of respawning daemons.
                   2476: .Pp
                   2477: .Em Note :
                   2478: The
                   2479: .Nx
                   2480: interface and implementation of the Segvguard is still experimental, and may
                   2481: change in future releases.
1.43      jruoho   2482: .It Li security.pax.segvguard.expiry_timeout
                   2483: If the max number was not reached within this timeout (in seconds), the entry
                   2484: will expire.
1.1       pavel    2485: .It Li security.pax.segvguard.global
                   2486: Specifies the default global policy for programs without an
                   2487: explicit enable/disable flag.
                   2488: .Pp
                   2489: When non-zero, all programs will get the PaX Segvguard,
                   2490: except those exempted with
1.69      wiz      2491: .Xr paxctl 8 .
1.2       wiz      2492: Otherwise, no program will get the PaX Segvguard restrictions,
1.1       pavel    2493: except those specifically marked as such with
1.4       elad     2494: .Xr paxctl 8 .
1.43      jruoho   2495: .It Li security.pax.segvguard.max_crashes
                   2496: The maximum number of segfaults a program can receive before suspension.
1.1       pavel    2497: .It Li security.pax.segvguard.suspend_timeout
                   2498: Number of seconds to suspend a user from running a faulting program when the
                   2499: limit was exceeded.
                   2500: .El
                   2501: .El
1.91      kamil    2502: .Ss The vendor.* subtree ( Dv CTL_VENDOR )
1.1       pavel    2503: The
                   2504: .Li vendor
                   2505: toplevel name is reserved to be used by vendors who wish to
                   2506: have their own private MIB tree.
                   2507: Intended use is to store values under
                   2508: .Dq vendor.\*[Lt]yourname\*[Gt].* .
                   2509: .Sh SEE ALSO
                   2510: .Xr sysctl 3 ,
                   2511: .Xr ipsec 4 ,
                   2512: .Xr tcp 4 ,
1.62      jruoho   2513: .Xr security 7 ,
1.1       pavel    2514: .Xr sysctl 8
                   2515: .Sh HISTORY
                   2516: The
                   2517: .Nm
                   2518: variables first appeared in
                   2519: .Bx 4.4 .

CVSweb <webmaster@jp.NetBSD.org>