CVS log for src/sbin/scsictl/scsictl.c

Up to [cvs.NetBSD.org] / src / sbin / scsictl

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

scsictl(8): KNF

No functional change intended.

Add 'identify vpd' to also report Vital Product Data that identifies the device.

Add REPORT_LUNS command.

Sync with netbsd-5

Pull up following revision(s) (requested by flxd in ticket #1418):
	sbin/scsictl/scsictl.8: 1.27, 1.29, 1.30 via patch
	sbin/scsictl/scsictl.c: revision 1.39 via patch
	sys/dev/scsipi/scsi_disk.h: revision 1.32
Add "getrealloc" and "setrealloc" commands to get/set automatic reallocation
parameters/enables for error recovery, similar to {get,set}cache.
Many old SCSI disks shipped with reallocation disabled, albeit
supporting it.
Minor (cosmetic) fixup of scsi_disk_pages while there.
Based upon code in PR bin/29165 by Greg A. Woods.
OK christos@
--
Bump date for previous.
--
Add crossreference to scsi(4) per note in PR 9627.
Whitespace, sort.

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

Pull up following revision(s) (requested by flxd in ticket #1276):
	sys/dev/scsipi/scsi_disk.h: revision 1.32
	sbin/scsictl/scsictl.8: revision 1.27-1.30
	sbin/scsictl/scsictl.c: revision 1.39
Add "getrealloc" and "setrealloc" commands to get/set automatic reallocation
parameters/enables for error recovery, similar to {get,set}cache.
Many old SCSI disks shipped with reallocation disabled, albeit
supporting it.
Minor (cosmetic) fixup of scsi_disk_pages while there.
Based upon code in PR bin/29165 by Greg A. Woods.
OK christos@
Bump date for previous.
Use more and more appropriate markup while here.
Add crossreference to scsi(4) per note in PR 9627.
Whitespace, sort.

Add "getrealloc" and "setrealloc" commands to get/set automatic reallocation
parameters/enables for error recovery, similar to {get,set}cache.
Many old SCSI disks shipped with reallocation disabled, albeit supporting it.
Minor (cosmetic) fixup of scsi_disk_pages while there.
Based upon code in PR bin/29165 by Greg A. Woods.
OK christos@

src is too big these days to tolerate superfluous apostrophes.  It's
"its", people!

resync with head

sync with head

sync with (a bit old) head

We supply data with the FORMAT UNIT command, so tell the kernel which
direction it is to go (write).

take sizeof actual symbol we are memsetting

Resync to 2012-11-19 00:00:00 UTC

make a bunch of globals static

drop write-only variable

Use __dead

Decide on printing an int as int and not as short.

Sync with HEAD.

sync with head.

Remove clause 3 and 4 from TNF licenses

sync with HEAD

Sync with HEAD.

PR/37932: Yakovetsky Vladimir: build distribution with USE_FORT fails
fix buffer overflow

Kimura Fuyuki, bin/35216: add a setspeed command, to set the highest speed
that the optical drive should use for reading data.

Pull up revision 1.28 (requested by lukem in ticket #402):
Ensure that "setcache <mode>" doesn't use random data for "byte2"
("setcache <mode> save" DTRT).
Found by gcc -Wuninitialized.
Appease other -Wuninitialized warnings.

Ensure that "setcache <mode>" doesn't use random data for "byte2"
("setcache <mode> save" DTRT).
Found by gcc -Wuninitialized.

Appease other -Wuninitialized warnings.

Part 1 of a cleanup pass over the SCSI subsystem.  The aim is to name
everything "scsi_*", since we really are talking about the SCSI command
set, ATAPI transport not withstanding.  Improve the names of many structures,
and prepend "SCSI_" onto all SCSI command opcodes.  Place items described
by the SCSI Primary Commands document into scsi_spc.h.

Kill __P(), use ANSI function declarations; WARNS=3.

Add command to read the defect data from a direct access device.

Pullup rev 1.24 (requested by fair in ticket #431)

Increase the SCSI command timeout for device start & stop from 10
to 30 seconds. PR#25734

Increase the SCSI command timeout for device start & stop from 10
to 30 seconds, per PR 25734. I've seen this problem myself. I think
that scsictl should:

1. accept a timeout flag/parameter to set the timeout to an arbitrary
value other than the default.

2. support a verbose mode that would report the timeout value before
the command is started, and then report how long the command actually
took to complete, though I suppose the latter could also be done
by using time(1).

Homogenize usage messages: make the 'usage' word all lowercase, as this seems
to be the most common practice in our tree.

Add prevent/allow commands.

Add a flushcache command -- I need it for my DVD+RW.

Pull up revisions 1.16-1.18 (requested by thorpej in ticket #764):
  Several changes/updates to scsictl:
   o Allow specification of logical blocksize
   o Add 'getcache' and 'setcache' commands
   o Add 'tur', 'reserve', 'release', 'start', and 'stop' functions
   o Add an 'immediate' option to do formatting in the background
   o Fix bug in scsi_command -- value in resets is an int not a
     bitmask
   o Fix usage of errx() / warnx() and remove unneeded trailing \n

Add NetBSD RCS Ids.

Added debug command to support SCIOCDEBUG.

* Add "getcache" and "setcache" commands to get/set basic cache
  parameters (enables, really).
* Fix an error in the manpage.
* Shuffle some code to group things together better.

sweep of errx/warnx, remove unnecessary trailing \n

Add a bunch of stuff from Bob Nestor that fixes format to allow one to
specify device logical blocksize.

Furthermore, it also adds an 'immediate' option, which then sends more modern
devices into formatting in the background. scsictl still waits around and
sends a TEST UNIT READY every 10 seconds and, based upon the sense data
it gets back after the invariable CHECK CONDITION, prints out a progress
indicator (based upon SKSV progress in the sense data).

While we're at it, add a 'tur', 'reserve', 'release', 'start' and 'stop'
functions to the device commands.

Fix a long standing bug in scsi_command- the value in retsts is an integral
value- not a bitmask.

21600000 -> 6*60*60*1000 (timeout in six hours for format command)

Add and document a 'detach' command.

Adapt for MODE SENSE/SELECT changes in kernel.

Remove superfluous newlines in calls to errx().

convert to use getprogname()

Pull up to last week's -current.

Increase the format timeout to 6 hours.

Make `reassign' actually work.

Make `all' a synonym for the `any' keyword.

Clarify usage message.

Collect all little usage-messages spread around into one place,
and as a side effect, print the available commands (and their
usage) if no command is given on the command line.

Approved by Jason Thorpe.

Code to check if a cooked device was specified was failing even if the
cooked device was opened successfully.  Also fix a typo.

Fixes second part of PR bin/6883 for Soren S. Jorvang <soren@t.dk>

Simple support for formatting a SCSI disk.  This will be enhanced in
the near future.

Fix a thinko in the device opening code.

Fix a couple of usage strings.

scsictl(8) - a program to manipulate SCSI devices and busses.  Currently
supports:

Devices: identify, reassign blocks, reset

Busses: reset, scan for devices

Coming soon, device formatting, mode page editing, device freeze/thaw, etc.