The NetBSD Project

CVS log for src/lib/libedit/el.h

[BACK] Up to [] / src / lib / libedit

Request diff between arbitrary revisions

Default branch: MAIN
Current tag: netbsd-8

Revision / (download) - annotate - [select for diffs], Sun Jul 23 14:41:26 2017 UTC (15 months, 3 weeks ago) by snj
Branch: netbsd-8
CVS Tags: netbsd-8-0-RELEASE, netbsd-8-0-RC2, netbsd-8-0-RC1, matt-nb8-mediatek-base, matt-nb8-mediatek
Changes since 1.41: +5 -3 lines
Diff to previous 1.41 (colored) next main 1.42 (colored)

Pull up following revision(s) (requested by kre in ticket #102):
	lib/libedit/Makefile: 1.64-1.65
	lib/libedit/editline.3: 1.94-1.96
	lib/libedit/editrc.5: 1.33
	lib/libedit/el.c: 1.93-1.94
	lib/libedit/el.h: 1.42
	lib/libedit/literal.c: 1.1-1.3
	lib/libedit/literal.h: 1.1-1.2
	lib/libedit/prompt.c: 1.27
	lib/libedit/read.c: 1.103
	lib/libedit/refresh.c: 1.52-1.54
	lib/libedit/refresh.h: 1.11
	lib/libedit/terminal.c: 1.33
Make the default editrc file be $EDITRC (from env) if set, falling back
to $HOME/.editrc otherwise.    Better support for this in sh coming.
Include EDITRC in doc.
mention the limitation of the literal sequence delimiter.
- handle literal escape sequence printing.
- factor out common code in allocation and freeing of the display.
- add literal sequence handling.
remove unused variable
add literal escape sequence support, patterned after the tcsh ones.
fix comment
Fix an obvious, but almost invisible typo (avoid some core dumps).
Allow wide characters (properly encoded as byte strings according to LC_CTYPE)
to be (perhaps part of) the "invisible" characters in a prompt, or the
required prompt character which follows the literal sequence (this character
must be one with a printing column width >= 1).  The literal indicator
character (which is just a marker, and not printed anywhere) (the PSlit
parameter in sh(1)) can also be a wide char (passed to libedit as a wchar_t,
encoded as that by sh(1) or other applications that support this.)
Note: this has currently only been tested with everything ascii (C locale).
Remove workaround for ancient HTML generation code.

Revision 1.41 / (download) - annotate - [select for diffs], Tue May 24 15:00:45 2016 UTC (2 years, 5 months ago) by christos
Branch: MAIN
CVS Tags: prg-localcount2-base3, prg-localcount2-base2, prg-localcount2-base1, prg-localcount2-base, prg-localcount2, pgoyette-localcount-base, pgoyette-localcount-20170426, pgoyette-localcount-20170320, pgoyette-localcount-20170107, pgoyette-localcount-20161104, pgoyette-localcount-20160806, pgoyette-localcount-20160726, pgoyette-localcount, netbsd-8-base, localcount-20160914, bouyer-socketcan-base1, bouyer-socketcan-base, bouyer-socketcan
Branch point for: netbsd-8
Changes since 1.40: +1 -2 lines
Diff to previous 1.40 (colored)

From Ingo Schwarze:

Reduce obfuscation of errno handling. There is only one purpose
non-local errno handling is needed for:  Inside el_wgets(), several
functions call down indirectly to el_wgetc(), many of them via the
dispatch table.  When el_wgetc() fails, it does properly report
failure, but then various cleanup is done which may clobber errno.
But when returning due to failure, el_wgets() wants to have errno
set to the reason of the original read failure, not to the reason
of some subsequent failure of some cleanup operation.  So el_wgetc()
needs to save errno, and if it's non-zero, el_wgets() needs to
restore it on failure.

This core logic is currently obscured by the fact that el_errno
is set and inspected at some additional places where it isn't needed.
Besides, since el_wgetc() and and el_wgets() are both in read.c,
el_errno does not need to be in struct editline, it can and should
be local to read.c in struct el_read_t.

Let's look at what can be simplified.

 1. keymacro_get() abuses el_errno instead of having a proper
    error return code.  Adding that error return code is easy
    because node_trav() already detects the condition and an
    adequate code is already defined.  Returning it, testing
    for it in read_getcmd(), and returning with error from there
    removes the need to inspect el_errno from el_wgets() after
    calling read_getcmd().
    Note that resetting lastchar and cursor and clearing buffer[0]
    is irrelevant.  The code returns from el_wgets() right afterwards.
    Outside el_wgets(), these variables are no longer relevant.
    When el_wgets() is called the next time, it will call ch_reset()
    anyway, resetting the two pointers.  And as long as lastchar
    points to the beginning of the buffer, the contents of the
    buffer won't be used for anything.

 2. read_getcmd() doesn't need to set el_errno again after el_wgetc()
    failure since el_wgetc() already did so.  While here, remove
    the silly "if EOF or error" comments from the el_wgetc()
    return value tests.  It's a public interface documented in a
    manual, so people working on the implementation can obviously
    be expected to know how it works.  It's a case of

      count++;  /* Increment count. */

 3. In the two code paths of el_wgets() that lead up to "goto noedit",
    there is no need to save the errno because nothing that might
    change it happens before returning.

For clarity, since el_wgets() is the function restoring the errno,
also move initializing it to the same function.

Finally, note that restoring errno when the saved value is zero is
wrong.  No library code is ever allowed to clear a previously set
value of errno.  Only application programs are allowed to do that,
and even they usually don't need to do so, except when using certain
ill-designed interfaces like strtol(3).

I tested that the behaviour remains sane in the following cases,
all during execution of el_wgets(3) and with a signal handler
for USR1 installed without SA_RESTART.

 * Enter some text and maybe move around a bit.
   Then send a USR1 signal.
   The signal gets processed, then read_char() resumes reading.
   Send another USR1 signal.
   Now el_wgets() sets errno=EINTR and returns -1.

 * Press Ctrl-V to activate ed-quoted-insert.
   Then send a USR1 signal.
   The signal gets processed, then read_char() resumes reading.
   Send another USR1 signal.
   ed_quoted_insert() returns ed_end_of_file(), i.e. CC_EOF,
   and el_wgets() returns 0.

 * Press a key starting a keyboard macro.
   Then send a USR1 signal.
   The signal gets processed, then read_char() resumes reading.
   Send another USR1 signal.
   Now el_wgets() sets errno=EINTR and returns -1.

 * Press : to enter builtin command mode.
   Start typing a command.
   Then send a USR1 signal.
   The signal gets processed, then read_char() resumes reading.
   Send another USR1 signal.
   Now c_gets() returns -1, ed_command() beeps and returns CC_REFRESH,
   and el_wgets() resumes operation as it should.

I also tested with "el_set(el, EL_EDITMODE, 0)", and it returns
the right value and sets errno correctly.

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.

CVSweb <>