Up to [cvs.NetBSD.org] / src / lib / libc / time
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
Merge tzcode-2024b Release 2024b - 2024-09-04 12:27:47 -0700 Changes to code localtime.c now always uses a TZif file's time type 0 to handle timestamps before the file's first transition. Formerly, localtime.c sometimes inferred a different time type, in order to handle problematic data generated by zic 2018e or earlier. As it is now safe to assume more recent versions of zic, there is no longer a pressing need to fail to conform RFC 8536 section 3.2, which requires using time type 0 in this situation. This change does not affect behavior when reading TZif files generated by zic 2018f and later. POSIX.1-2024 removes asctime_r and ctime_r and does not let libraries define them, so remove them except when needed to conform to earlier POSIX. These functions are dangerous as they can overrun user buffers. If you still need them, add -DSUPPORT_POSIX2008 to CFLAGS. The SUPPORT_C89 option now defaults to 1 instead of 0, fixing a POSIX-conformance bug introduced in 2023a. tzselect now supports POSIX.1-2024 proleptic TZ strings. Also, it assumes POSIX.2-1992 or later, as practical porting targets now all support that, and it uses some features from POSIX.1-2024 if available. Changes to build procedure 'make check' no longer requires curl and Internet access. The build procedure now assumes POSIX.2-1992 or later, to simplify maintenance. To build on Solaris 10, the only extant system still defaulting to pre-POSIX, prepend /usr/xpg4/bin to PATH. Changes to documentation The documentation now reflects POSIX.1-2024. Changes to commentary Commentary about historical transitions in Portugal and her former colonies has been expanded with links to many relevant legislation. (Thanks to Tim Parenti.)
Sync with tzcode2024a: Release 2024a - 2024-02-01 09:28:56 -0800 Changes to code The FROM and TO columns of Rule lines can no longer be "minimum" or an abbreviation of "minimum", because TZif files do not support DST rules that extend into the indefinite past - although these rules were supported when TZif files had only 32-bit data, this stopped working when 64-bit TZif files were introduced in 1995. This should not be a problem for realistic data, since DST was first used in the 20th century. As a transition aid, FROM columns like "minimum" are now diagnosed and then treated as if they were the year 1900; this should suffice for TZif files on old systems with only 32-bit time_t, and it is more compatible with bugs in 2023c-and-earlier localtime.c. (Problem reported by Yoshito Umaoka.) localtime and related functions no longer mishandle some timestamps that occur about 400 years after a switch to a time zone with a DST schedule. In 2023d data this problem was visible for some timestamps in November 2422, November 2822, etc. in America/Ciudad_Juarez. (Problem reported by Gilmore Davidson.) strftime %s now uses tm_gmtoff if available. (Problem and draft patch reported by Dag-Erling Smørgrav.) Changes to build procedure The leap-seconds.list file is now copied from the IERS instead of from its downstream counterpart at NIST, as the IERS version is now in the public domain too and tends to be more up-to-date. (Thanks to Martin Burnicki for liaisoning with the IERS.) Changes to documentation The strftime man page documents which struct tm members affect which conversion specs, and that tzset is called. (Problems reported by Robert Elz and Steve Summit.)
Update tzcode from 2022g to 2023c: Release 2023c - 2023-03-28 12:42:14 -0700 Release 2023b - 2023-03-23 19:50:38 -0700 Release 2023a - 2023-03-22 12:39:33 -0700 Changes to code You can now tell tzselect local time, to simplify later choices. Select the 'time' option in its first prompt. You can now compile with -DTZNAME_MAXIMUM=N to limit time zone abbreviations to N bytes (default 255). The reference runtime library now rejects POSIX-style TZ strings that contain longer abbreviations, treating them as UTC. Previously the limit was platform dependent and abbreviations were silently truncated to 16 bytes even when the limit was greater than 16. The code by default is now designed for C99 or later. To build in a C89 environment, compile with -DPORT_TO_C89. To support C89 callers of the tzcode library, compile with -DSUPPORT_C89. The two new macros are transitional aids planned to be removed in a future version, when C99 or later will be required. The code now builds again on pre-C99 platforms, if you compile with -DPORT_TO_C89. This fixes a bug introduced in 2022f. On C23-compatible platforms tzcode no longer uses syntax like 'static [[noreturn]] void usage(void);'. Instead, it uses '[[noreturn]] static void usage(void);' as strict C23 requires. (Problem reported by Houge Langley.) The code's functions now constrain their arguments with the C 'restrict' keyword consistently with their documentation. This may allow future optimizations. zdump again builds standalone with ckdadd and without setenv, fixing a bug introduced in 2022g. (Problem reported by panic.) leapseconds.awk can now process a leap seconds file that never expires; this might be useful if leap seconds are discontinued. Changes to commentary tz-link.html has a new section "Coordinating with governments and distributors". (Thanks to Neil Fuller for some of the text.) To improve tzselect diagnostics, zone1970.tab's comments column is now limited to countries that have multiple timezones. Note that leap seconds are planned to be discontinued by 2035.
Merge in 2022g: Although tzcode still works with C89, bugs found in recent routine maintenance indicate that bitrot has set in and that in practice C89 is no longer used to build tzcode. As it is a maintenance burden, support for C89 is planned to be removed soon. Instead, please use compilers compatible with C99, C11, C17, or C23. timegm, which tzcode implemented in 1989, will finally be standardized 34 years later as part of C23, so timegm is now supported even if STD_INSPIRED is not defined. Fix bug in zdump's tzalloc emulation on hosts that lack tm_zone. (Problem reported by Đoàn Trần Công Danh.) Fix bug in zic on hosts where malloc(0) yields NULL on success. (Problem reported by Tim McBrayer for AIX 6.1.) Fix zic configuration to avoid linkage failures on some platforms. (Problems reported by Gilmore Davidson and Igor Ivanov.) Work around MS-Windows nmake incompatibility with POSIX. (Problem reported by Manuela Friedrich.) Port mktime and strftime to debugging platforms where accessing uninitialized data has undefined behavior (strftime problem reported by Robert Elz). Check more carefully for unlikely integer overflows, preferring C23 <stdckdint.h> to overflow checking by hand, as the latter has had obscure bugs.
Update to tzcode2022f Changes to code zic now supports links to links regardless of input line order. For example, if Australia/Sydney is a Zone, the lines Link Australia/Canberra Australia/ACT Link Australia/Sydney Australia/Canberra now work correctly, even though the shell commands ln Australia/Canberra Australia/ACT ln Australia/Sydney Australia/Canberra would fail because the first command attempts to use a link Australia/Canberra that does not exist until after the second command is executed. Previously, zic had unspecified behavior if a Link line's target was another link, and zic often misbehaved if a Link line's target was a later Link line. Fix line number in zic's diagnostic for a link to a link. Fix a bug that caused localtime to mishandle timestamps starting in the year 2438 when reading data generated by 'zic -b fat' when distant-future DST transitions occur at times given in standard time or in UT, not the usual case of local time. This occurs when the corresponding .zi Rule lines specify DST transitions with TO columns of 'max' and AT columns that end in 's' or 'u'. The number 2438 comes from the 32-bit limit in the year 2038, plus the 400-year Gregorian cycle. (Problem reported by Bradley White.) On glibc 2.34 and later, which optionally supports 64-bit time_t on platforms like x86 where time_t was traditionally 32 bits, default time_t to 64 instead of 32 bits. This lets functions like localtime support timestamps after the year 2038, and fixes year-2038 problems in zic when accessing files dated after 2038. To continue to limit time_t to 32 bits on these platforms, use "make CFLAGS='-D_TIME_BITS=32'". In C code, do not enable large-file support on platforms like AIX and macOS that no longer need it now that tzcode does not use off_t or related functions like 'stat'. Large-file support is still enabled by default on GNU/Linux, as it is needed for 64-bit time_t support. In C code, prefer C23 keywords to pre-C23 macros for alignof, bool, false, and true. Also, use the following C23 features if available: __has_include, unreachable. zic no longer works around Qt bug 53071, as the relevant Qt releases have been out of support since 2019. This change affects only fat TZif files, as thin files never had the workaround. zdump no longer modifies the environ vector when compiled on platforms lacking tm_zone or when compiled with -DUSE_LTZ=0. This avoid undefined behavior on POSIX platforms.
update to 2022e; no real changes
Welcome to tzcode-2022c Work around a bug in onetrueawk that broke commands like 'make traditional_tarballs' on FreeBSD, macOS, etc. (Problem reported by Deborah Goldsmith.) Add code to tzselect that uses experimental structured comments in zone1970.tab to clarify whether Zones like Africa/Abidjan and Europe/Istanbul cross continent or ocean boundaries. (Inspired by a problem reported by Peter Krefting.) Fix bug with 'zic -d /a/b/c' when /a is unwritable but the directory /a/b already exists. Remove zoneinfo2tdf.pl, as it was unused and triggered false malware alarms on some email servers.
Welcome to 2022b: zic has a new option '-R @N' to output explicit transitions < N. (Need suggested by Almaz Mingaleev.) 'zic -r @N' no longer outputs bad data when N < first transition. (Problem introduced in 2021d and reported by Peter Krefting.) zic now checks its input for NUL bytes and unterminated lines, and now supports input line lengths up to 2048 (not 512) bytes. gmtime and related code now use the abbreviation "UTC" not "GMT". POSIX is being revised to require this. When tzset and related functions set vestigial static variables like tzname, they now prefer specified timestamps to unspecified ones. (Problem reported by Almaz Mingaleev.) zic no longer complains "can't determine time zone abbreviation to use just after until time" when a transition to a new standard time occurs simultanously with the first DST fallback transition.
welcome to tzcode-2022a Changes to code Fix bug when mktime gets confused by truncated TZif files with unspecified local time. (Problem reported by Almaz Mingaleev.) Fix bug when 32-bit time_t code reads malformed 64-bit TZif data. (Problem reported by Christos Zoulas.) When reading a version 2 or later TZif file, the TZif reader now validates the version 1 header and data block only enough to skip over them, as recommended by RFC 8536 section 4. Also, the TZif reader no longer mistakenly attempts to parse a version 1 TZIf file header as a TZ string. zdump -v now outputs "(localtime failed)" and "(gmtime failed)" when local time and UT cannot be determined for a timestamp.
Change to code and documentation from 2021a -> 2021e Release 2021e - 2021-10-21 18:41:00 -0700 Changes to code none Release 2021d - 2021-10-15 13:48:18 -0700 Changes to code 'zic -r' now uses "-00" time zone abbreviations for intervals with UT offsets that are unspecified due to -r truncation. This implements a change in draft Internet RFC 8536bis. Release 2021c - 2021-10-01 14:21:49 -0700 Changes to code Fix a bug in 'zic -b fat' that caused old timestamps to be mishandled in 32-bit-only readers (problem reported by Daniel Fischer). Changes to documentation Distribute the SECURITY file (problem reported by Andreas Radke). Release 2021b - 2021-09-24 16:23:00 -0700 Changes to maintenance procedure The new file SECURITY covers how to report security-related bugs. Several backward-compatibility links have been moved to the 'backward' file. These links, which range from Africa/Addis_Ababa to Pacific/Saipan, are only for compatibility with now-obsolete guidelines suggesting an entry for every ISO 3166 code. The intercontinental convenience links Asia/Istanbul and Europe/Nicosia have also been moved to 'backward'. Changes to code zic now creates each output file or link atomically, possibly by creating a temporary file and then renaming it. This avoids races where a TZ setting would temporarily stop working while zic was installing a replacement file or link. zic -L no longer omits the POSIX TZ string in its output. Starting with 2020a, zic -L truncated its output according to the "Expires" directive or "#expires" comment in the leapseconds file. The resulting TZif files omitted daylight saving transitions after the leap second table expired, which led to far less-accurate predictions of times after the expiry. Although future timestamps cannot be converted accurately in the presence of leap seconds, it is more accurate to convert near-future timestamps with a few seconds error than with an hour error, so zic -L no longer truncates output in this way. Instead, when zic -L is given the "Expires" directive, it now outputs the expiration by appending a no-change entry to the leap second table. Although this should work well with most TZif readers, it does not conform to Internet RFC 8536 and some pickier clients (including tzdb 2017c through 2021a) reject it, so "Expires" directives are currently disabled by default. To enable them, set the EXPIRES_LINE Makefile variable. If a TZif file uses this new feature it is marked with a new TZif version number 4, a format intended to be documented in a successor to RFC 8536. zic -L LEAPFILE -r @LO no longer generates an invalid TZif file that omits leap second information for the range LO..B when LO falls between two leap seconds A and B. Instead, it generates a TZif version 4 file that represents the previously-missing information. The TZif reader now allows the leap second table to begin with a correction other than -1 or +1, and to contain adjacent transitions with equal corrections. This supports TZif version 4. The TZif reader now lets leap seconds occur less than 28 days apart. This supports possible future TZif extensions. Fix bug that caused 'localtime' etc. to crash when TZ was set to a all-year DST string like "EST5EDT4,0/0,J365/25" that does not conform to POSIX but does conform to Internet RFC 8536. Fix another bug that caused 'localtime' etc. to crash when TZ was set to a POSIX-conforming but unusual TZ string like "EST5EDT4,0/0,J365/0", where almost all the year is DST. Fix yet another bug that caused 'localtime' etc. to mishandle slim TZif files containing leap seconds after the last explicit transition in the table, or when handling far-future timestamps in slim TZif files lacking leap seconds. Fix localtime misbehavior involving positive leap seconds. This change affects only behavior for "right" system time, which contains leap seconds, and only if the UT offset is not a multiple of 60 seconds when a positive leap second occurs. (No such timezone exists in tzdb, luckily.) Without the fix, the timestamp was ambiguous during a positive leap second. With the fix, any seconds occurring after a positive leap second and within the same localtime minute are counted through 60, not through 59; their UT offset (tm_gmtoff) is the same as before. Here is how the fix affects timestamps in a timezone with UT offset +01:23:45 (5025 seconds) and with a positive leap second at 1972-06-30 23:59:60 UTC (78796800): time_t without the fix with the fix 78796800 1972-07-01 01:23:45 1972-07-01 01:23:45 (leap second) 78796801 1972-07-01 01:23:45 1972-07-01 01:23:46 ... 78796815 1972-07-01 01:23:59 1972-07-01 01:23:60 78796816 1972-07-01 01:24:00 1972-07-01 01:24:00 Fix an unlikely bug that caused 'localtime' etc. to misbehave if civil time changes a few seconds before time_t wraps around, when leap seconds are enabled. Fix bug in zic -r; in some cases, the dummy time type after the last time transition disagreed with the TZ string, contrary to Internet RFC 8563 section 3.3. Fix a bug with 'zic -r @X' when X is a negative leap second that has a nonnegative correction. Without the fix, the output file was truncated so that X appeared to be a positive leap second. Fix a similar, even-less-likely bug when truncating at a positive leap second that has a nonpositive correction. zic -r now reports an error if given rolling leap seconds, as this usage has never generally worked and is evidently unused. zic now generates a POSIX-conforming TZ string for TZif files where all-year DST is predicted for the indefinite future. For example, for all-year Eastern Daylight Time, zic now generates "XXX3EDT4,0/0,J365/23" where it previously generated "EST5EDT,0/0,J365/25" or "". (Thanks to Michael Deckers for noting the possibility of POSIX conformance.) zic.c no longer requires sys/wait.h (thanks to spazmodius for noting it wasn't needed). When reading slim TZif files, zdump no longer mishandles leap seconds on the rare platforms where time_t counts leap seconds, fixing a bug introduced in 2014g. zdump -v now outputs timestamps at boundaries of what localtime and gmtime can represent, instead of the less-useful timestamps one day after the minimum and one day before the maximum. (Thanks to Arthur David Olson for prototype code, and to Manuela Friedrich for debugging help.) zdump's -c and -t options are now consistently inclusive for the lower time bound and exclusive for the upper. Formerly they were inconsistent. (Confusion noted by Martin Burnicki.) Changes to build procedure You can now compile with -DHAVE_MALLOC_ERRNO=0 to port to non-POSIX hosts where malloc doesn't set errno. (Problem reported by Jan Engelhardt.) Changes to documentation tzfile.5 better matches a draft successor to RFC 8536 <https://datatracker.ietf.org/doc/draft-murchison-rfc8536bis/01/>.
Merge tzcode-2021a - No comments in the changelog about the code changes.
update to 2020c
Merge tzcode2020b (except we keep tzsetwall(3) for now for compatibility, and we were "slim" already) Support for zic's long-obsolete '-y YEARISTYPE' option has been removed and, with it, so has support for the TYPE field in Rule lines, which is now reserved for compatibility with earlier zic. These features were previously deprecated in release 2015f. (Thanks to Tim Parenti.) zic now defaults to '-b slim' instead of to '-b fat'. zic's new '-l -' and '-p -' options uninstall any existing localtime and posixrules files, respectively. The undocumented and ineffective tzsetwall function has been removed.
Bring in 2020a
Mostly merge changes from HEAD upto 20200411
Sync with 2019b: zic's new -b option supports a way to control data bloat and to test for year-2038 bugs in software that reads TZif files. 'zic -b fat' and 'zic -b slim' generate larger and smaller output; for example, changing from fat to slim shrinks the Europe/London file from 3648 to 1599 bytes, saving about 56%. Fat and slim files represent the same set of timestamps and use the same TZif format as documented in tzfile(5) and in Internet RFC 8536. Fat format attempts to work around bugs or incompatibilities in older software, notably software that mishandles 64-bit TZif data or uses obsolete TZ strings like "EET-2EEST" that lack DST rules. Slim format is more efficient and does not work around 64-bit bugs or obsolete TZ strings. Currently zic defaults to fat format unless you compile with -DZIC_BLOAT_DEFAULT=\"slim\"; this out-of-the-box default is intended to change in future releases as the buggy software often mishandles timestamps anyway. zic no longer treats a set of rules ending in 2037 specially. Previously, zic assumed that such a ruleset meant that future timestamps could not be predicted, and therefore omitted a POSIX-like TZ string in the TZif output. The old behavior is no longer needed for current tzdata, and caused problems with newlib when used with older tzdata (reported by David Gauchard). zic no longer generates some artifact transitions. For example, Europe/London no longer has a no-op transition in January 1996.
Sync with HEAD
merge 2019a Changes to code zic now has an -r option to limit the time range of output data. For example, 'zic -r @1000000000' limits the output data to timestamps starting 1000000000 seconds after the Epoch. This helps shrink output size and can be useful for applications not needing the full timestamp history, such as TZDIST truncation; see Internet RFC 8536 section 5.1. (Inspired by a feature request from Christopher Wong, helped along by bug reports from Wong and from Tim Parenti.) Changes to documentation Mention Internet RFC 8536 (February 2019), which documents TZif. tz-link.html now cites tzdata-meta <https://tzdata-meta.timtimeonline.com/>.
Synch with HEAD
Release 2018i - 2018-12-30 11:05:43 -0800 Briefly: São Tomé and Príncipe switches from +01 to +00 on 2019-01-01. Changes to future timestamps Due to a change in government, São Tomé and Príncipe switches back from +01 to +00 on 2019-01-01 at 02:00. (Thanks to Vadim Nasardinov and Michael Deckers.) Release 2018h - 2018-12-23 17:59:32 -0800 Briefly: Qyzylorda, Kazakhstan moved from +06 to +05 on 2018-12-21. New zone Asia/Qostanay because Qostanay, Kazakhstan didn't move. Metlakatla, Alaska observes PST this winter only. Guess Morocco will continue to adjust clocks around Ramadan. Add predictions for Iran from 2038 through 2090. Changes to future timestamps Guess that Morocco will continue to fall back just before and spring forward just after Ramadan, the practice since 2012. (Thanks to Maamar Abdelkader.) This means Morocco will observe negative DST during Ramadan in main and vanguard formats, and in rearguard format it stays in the +00 timezone and observes ordinary DST in all months other than Ramadan. As before, extend this guesswork to the year 2037. As a consequence, Morocco is scheduled to observe three DST transitions in some Gregorian years (e.g., 2033) due to the mismatch between the Gregorian and Islamic calendars. The table of exact transitions for Iranian DST has been extended. It formerly cut off before the year 2038 in a nod to 32-bit time_t. It now cuts off before 2091 as there is doubt about how the Persian calendar will treat 2091. This change predicts DST transitions in 2038-9, 2042-3, and 2046-7 to occur one day later than previously predicted. As before, post-cutoff transitions are approximated. Changes to past and future timestamps Qyzylorda (aka Kyzylorda) oblast in Kazakhstan moved from +06 to +05 on 2018-12-21. This is a zone split as Qostanay (aka Kostanay) did not switch, so create a zone Asia/Qostanay. Metlakatla moved from Alaska to Pacific standard time on 2018-11-04. It did not change clocks that day and remains on -08 this winter. (Thanks to Ryan Stanley.) It will revert to the usual Alaska rules next spring, so this change affects only timestamps from 2018-11-04 through 2019-03-10. Change to past timestamps Kwajalein's 1993-08-20 transition from -12 to +12 was at 24:00, not 00:00. I transcribed the time incorrectly from Shanks. (Thanks to Phake Nick.) Nauru's 1979 transition was on 02-10 at 02:00, not 05-01 at 00:00. (Thanks to Phake Nick.) Guam observed DST irregularly from 1959 through 1977. (Thanks to Phake Nick.) Hong Kong observed DST in 1941 starting 06-15 (not 04-01), then on 10-01 changed standard time to +08:30 (not +08). Its transition back to +08 after WWII was on 1945-09-15, not the previous day. Its 1904-10-30 change took effect at 01:00 +08 (not 00:00 LMT). (Thanks to Phake Nick, Steve Allen, and Joseph Myers.) Also, its 1952 fallback was on 11-02 (not 10-25). This release contains many changes to timestamps before 1946 due to Japanese possession or occupation of Pacific/Chuuk, Pacific/Guam, Pacific/Kosrae, Pacific/Kwajalein, Pacific/Majuro, Pacific/Nauru, Pacific/Palau, and Pacific/Pohnpei. (Thanks to Phake Nick.) Assume that the Spanish East Indies was like the Philippines and observed American time until the end of 1844. This affects Pacific/Chuuk, Pacific/Kosrae, Pacific/Palau, and Pacific/Pohnpei. Changes to past tm_isdst flags For the recent Morocco change, the tm_isdst flag should be 1 from 2018-10-27 00:00 to 2018-10-28 03:00. (Thanks to Michael Deckers.) Give a URL to the official decree. (Thanks to Matt Johnson.)
Sync with HEAD, resolve a couple of conflicts
Welcome tzcode-2018g Changes to code When generating TZif files with leap seconds, zic no longer uses a format that trips up older 32-bit clients, fixing a bug introduced in 2018f. (Reported by Daniel Fischer.) Also, the zic workaround for QTBUG-53071 now also works for TZif files with leap seconds. The translator to rearguard format now rewrites the line "Rule Japan 1948 1951 - Sep Sat>=8 25:00 0 S" to "Rule Japan 1948 1951 - Sep Sun>=9 1:00 0 S". This caters to zic before 2007 and to Oracle TZUpdater 2.2.0 and earlier. (Reported by Christos Zoulas.) Changes to documentation tzfile.5 has new sections on interoperability issues.
Sync with head
Update to 2018f: Changes to code zic now always generates TZif files where time type 0 is used for timestamps before the first transition. This simplifies the reading of TZif files and should not affect behavior of existing TZif readers because the same set of time types is used; only their internal indexes may have changed. This affects only the legacy zones EST5EDT, CST6CDT, MST7MDT, PST8PDT, CET, MET, and EET, which previously used nonzero types for these timestamps. Because of the type 0 change, zic no longer outputs a dummy transition at time -2**59 (before the Big Bang), as clients should no longer need this to handle historical timestamps correctly. This reverts a change introduced in 2013d and shrinks most TZif files by a few bytes. zic now supports negative time-of-day in Rule and Leap lines, e.g., "Rule X min max - Apr lastSun -6:00 1:00 -" means the transition occurs at 18:00 on the Saturday before the last Sunday in April. This behavior was documented in 2018a but the code did not entirely match the documentation. localtime.c no longer requires at least one time type in TZif files that lack transitions or have a POSIX-style TZ string. This future-proofs the code against possible future extensions to the format that would allow TZif files with POSIX-style TZ strings and without transitions or time types. A read-access subscript error in localtime.c has been fixed. It could occur only in TZif files with timecnt == 0, something that does not happen in practice now but could happen in future versions. localtime.c no longer ignores TZif POSIX-style TZ strings that specify only standard time. Instead, these TZ strings now override the default time type for timestamps after the last transition (or for all time stamps if there are no transitions), just as DST strings specifying DST have always done. leapseconds.awk now outputs "#updated" and "#expires" comments, and supports leap seconds at the ends of months other than June and December. (Inspired by suggestions from Chris Woodbury.) Changes to documentation New restrictions: A Rule name must start with a character that is neither an ASCII digit nor "-" nor "+", and an unquoted name should not use characters in the set "!$%&'()*,/:;<=>?@[\]^`{|}~". The latter restriction makes room for future extensions (a possibility noted by Tom Lane). tzfile.5 now documents what time types apply before the first and after the last transition, if any. Documentation now uses the spelling "timezone" for a TZ setting that determines timestamp history, and "time zone" for a geographic region currently sharing the same standard time. The name "TZif" is now used for the tz binary data format. tz-link.htm now mentions the A0 TimeZone Migration utilities. (Thanks to Aldrin Martoq for the link.)
Sync with HEAD
Merge 2018e Changes to code zic now accepts subsecond precision in expressions like 00:19:32.13, which is approximately the legal time of the Netherlands from 1835 to 1937. However, because it is questionable whether the few recorded uses of non-integer offsets had subsecond precision in practice, there are no plans for tzdata to use this feature. (Thanks to Steve Allen for pointing out the limitations of historical data in this area.) The code is a bit more portable to MS-Windows. Installers can compile with -DRESERVE_STD_EXT_IDS on MS-Windows platforms that reserve identifiers like 'localtime'. (Thanks to Manuela Friedrich). Changes to documentation and commentary theory.html now outlines tzdb's extensions to POSIX's model for civil time, and has a section "POSIX features no longer needed" that lists POSIX API components that are now vestigial. (From suggestions by Steve Summit.) It also better distinguishes time zones from tz regions. (From a suggestion by Guy Harris.) Commentary is now more consistent about using the phrase "daylight saving time", to match the C name tm_isdst. Daylight saving time need not occur in summer, and need not have a positive offset from standard time. Commentary about historical transitions in Uruguay has been expanded with links to many relevant legal documents. (Thanks to Tim Parenti.) Commentary now uses some non-ASCII characters with Unicode value less than U+0100, as they can be useful and should work even with older editors such as XEmacs.
Merge tzcode2018c [ changelog with changes to tzdata sections removed ] Release 2018c - 2018-01-22 23:00:44 -0800 Changes to build procedure The build procedure now works around mawk 1.3.3's lack of support for character class expressions. (Problem reported by Ohyama.) Release 2018b - 2018-01-17 23:24:48 -0800 Changes to build procedure The distribution now contains the file 'pacificnew' again. This file was inadvertantly omitted in the 2018a distribution. (Problem reported by Matias Fonzo.) Release 2018a - 2018-01-12 22:29:21 -0800 Changes to build procedure The default installation locations have been changed to mostly match Debian circa 2017, instead of being designed as an add-on to 4.3BSD circa 1986. This affects the Makefile macros TOPDIR, TZDIR, MANDIR, and LIBDIR. New Makefile macros TZDEFAULT, USRDIR, USRSHAREDIR, BINDIR, ZDUMPDIR, and ZICDIR let installers tailor locations more precisely. (This responds to suggestions from Brian Inglis and from Steve Summit.) The default installation procedure no longer creates the backward-compatibility link US/Pacific-New, which causes confusion during user setup (e.g., see Debian bug 815200). Use 'make BACKWARD="backward pacificnew"' to create the link anyway, for now. Eventually we plan to remove the link entirely. tzdata.zi now contains a version-number comment. (Suggested by Tom Lane.) The Makefile now quotes values like BACKWARD more carefully when passing them to the shell. (Problem reported by Zefram.) Builders no longer need to specify -DHAVE_SNPRINTF on platforms that have snprintf and use pre-C99 compilers. (Problem reported by Jon Skeet.) Changes to code zic has a new option -t FILE that specifies the location of the file that determines local time when TZ is unset. The default for this location can be configured via the new TZDEFAULT makefile macro, which defaults to /etc/localtime. Diagnostics and commentary now distinguish UT from UTC more carefully; see theory.html for more information about UT vs UTC. zic has been ported to GCC 8's -Wstringop-truncation option. (Problem reported by Martin Sebor.) Changes to documentation and commentary The zic man page now documents the longstanding behavior that times and years can be out of the usual range, with negative times counting backwards from midnight and with year 0 preceding year 1. (Problem reported by Michael Deckers.) The theory.html file now mentions the POSIX limit of six chars per abbreviation, and lists alphabetic abbreviations used. The files tz-art.htm and tz-link.htm have been renamed to tz-art.html and tz-link.html, respectively, for consistency with other file names and to simplify web server configuration.
Welcome to 2017c: zic and the reference runtime now reject multiple leap seconds within 28 days of each other, or leap seconds before the Epoch. As a result, support for double leap seconds, which was obsolescent and undocumented, has been removed. Double leap seconds were an error in the C89 standard; they have never existed in civil timekeeping. (Thanks to Robert Elz and Bradley White for noticing glitches in the code that uncovered this problem.) zic now warns about use of the obsolescent and undocumented -y option, and about use of the obsolescent TYPE field of Rule lines. zic now allows unambiguous abbreviations like "Sa" and "Su" for weekdays; formerly it rejected them due to a bug. Conversely, zic no longer considers non-prefixes to be abbreviations; for example, it no longer accepts "lF" as an abbreviation for "lastFriday". Also, zic warns about the undocumented usage with a "last-" prefix, e.g., "last-Fri". Similarly, zic now accepts the unambiguous abbreviation "L" for "Link" in ordinary context and for "Leap" in leap-second context. Conversely, zic no longer accepts non-prefixes such as "La" as abbreviations for words like "Leap". zic no longer accepts leap second lines in ordinary input, or ordinary lines in leap second input. Formerly, zic sometimes warned about this undocumented usage and handled it incorrectly. The new macro HAVE_TZNAME governs whether the tzname external variable is exported, instead of USG_COMPAT. USG_COMPAT now governs only the external variables "timezone" and "daylight". This change is needed because the three variables are not in the same category: although POSIX requires tzname, it specifies the other two variables as optional. Also, USG_COMPAT is now 1 or 0: if not defined, the code attempts to guess it from other macros. localtime.c and difftime.c no longer require stdio.h, and .c files other than zic.c no longer require sys/wait.h. zdump.c no longer assumes snprintf. (Reported by Jonathan Leffler.) Calculation of time_t extrema works around a bug in GCC 4.8.4 (Reported by Stan Shebs and Joseph Myers.) zic.c no longer mistranslates formats of line numbers in non-English locales. (Problem reported by Benno Schulenberg.) Several minor changes have been made to the code to make it a bit easier to port to MS-Windows and Solaris. (Thanks to Kees Dekker for reporting the problems.) Changes to documentation and commentary The two new files 'theory.html' and 'calendars' contain the contents of the removed file 'Theory'. The goal is to document tzdb theory more accessibly. The zic man page now documents abbreviation rules. tz-link.htm now covers how to apply tzdata changes to clients. (Thanks to Jorge Fábregas for the AIX link.) It also mentions MySQL. The leap-seconds.list URL has been updated to something that is more reliable for tzdb. (Thanks to Tim Parenti and Brian Inglis.)
Sync with HEAD
merge tzcode2017b.
Sync with HEAD
Sync with HEAD
merge 2017a
Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
tzcode2016i
Sync with HEAD
file version was added on branch pgoyette-localcount on 2016-11-04 14:48:53 +0000
welcome to 2016h