[BACK]Return to rc.conf CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src / etc

Please note that diffs are not public domain; they are subject to the copyright notices on the relevant files.

Diff for /src/etc/rc.conf between version 1.85 and 1.85.2.8

version 1.85, 2000/06/13 16:29:53 version 1.85.2.8, 2000/10/02 03:29:38
Line 1 
Line 1 
 #       $NetBSD$  #       $NetBSD$
 #  #
 # see rc.conf(5) for more information.  # see rc.conf(5) for more information.
   #
 # uncomment this if you want to use local paths in rc  
 #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin  
   
 # Use program=YES to enable program, NO to disable it. program_flags are  # Use program=YES to enable program, NO to disable it. program_flags are
 # passed to the program on the command line.  # passed to the program on the command line.
   #
   
   # Load the defaults in from /etc/defaults/rc.conf (if it's readable).
   # These can be overriden below.
   #
   if [ -r /etc/defaults/rc.conf ]; then
           . /etc/defaults/rc.conf
   fi
   
 # If this is not set to YES, the system will drop into single-user mode.  # If this is not set to YES, the system will drop into single-user mode.
   #
 rc_configured=NO  rc_configured=NO
   
 # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.  # Add local overrides below
 do_rcshutdown=YES  #
   
 # Basic network configuration  
   
 # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu)  
 hostname=""                             # if blank, use /etc/myname  
   
 # if there's only one way out of your network, set this to the hostname  
 # or the IP address of the router that will get your packets off the LAN.  
 defaultroute=""                         # if blank, use /etc/mygate  
   
 # the NIS domain name (formerly known as Yellow Pages); not in any way  
 # related to Internet domain names.  
 domainname=""                           # if blank, use /etc/defaultdomain  
   
 # Filesystems to mount early in boot-up  
 critical_filesystems_beforenet="/usr /var"  
 critical_filesystems=""  
   
 # Set this to YES if you have purposefully setup no swap partitions and  
 # don't want to be warned about it  
 no_swap=NO  
   
 # One-time actions and programs on boot-up.  
 lkm=NO                                          # run /etc/rc.lkm  
 savecore=YES            savecore_flags="-z"  
 clear_tmp=YES                                   # clear /tmp after reboot  
 update_motd=YES                                 # updates /etc/motd  
 dmesg=YES               dmesg_flags=""          # write /var/run/dmesg.boot  
 accounting=NO                                   # needs /var/account/acct  
   
 # NOTE: default coredump name now set in /etc/sysctl.conf  
   
 # Security setting.  If $securelevel is non-empty, the system securelevel  
 # is set to this value early in the boot sequence.  Otherwise the default  
 # action is taken (see init(8)).  
 securelevel=""                                  # securelevel to set to  
   
 # To set the IP address of an interface either use  
 # ifconfig_xxN="IP-NO"  
 # where xxN is the interface.  The this variable is not set the  
 # contents of the file /etc/ifconfig.xxN is used.  
   
 # Networking startup  
 ipfilter=NO                                     # uses /etc/ipf.conf  
 ipnat=NO                                        # uses /etc/ipnat.conf  
 ipsec=NO                                        # uses /etc/ipsec.conf  
 ipmon=NO                ipmon_flags="-sn"       # syslog ipfilter messages  
 auto_ifconfig=YES                               # config all avail. interfaces  
 net_interfaces=""                               # used only if above is NO  
 flushroutes=YES                                 # flush routes in netstart  
 dhclient=NO                                     # behave as a DHCP client  
 dhclient_flags=""                               # blank: config all interfaces  
 ntpdate=NO              ntpdate_hosts=""        # blank: hosts in /etc/ntp.conf  
 ppp_peers=""                                    # /etc/ppp/peers to call  
 ip6mode=host                                    # host, autohost or router  
 ip6defaultif=""                                 # for ip6mode=host/autohost only  
 rtsol=NO                rtsol_flags=""          # for ip6mode=autohost only  
   
 # Daemons required by servers.  These are not needed for strictly client use.  
 # inetd is used to start many IP-based services.  
 inetd=YES               inetd_flags="-l"        # -l logs libwrap  
 # rpcbind is used to look up RPC-based services.  
 rpcbind=NO              rpcbind_flags="-l"      # -l logs libwrap  
   
 # Commonly used daemons  
 syslogd=YES             syslogd_flags="-s"      # -s "secure" unix domain only  
 cron=YES  
 named=NO                named_flags=""  
 timed=NO                timed_flags=""  
 ntpd=NO                 ntpd_flags=""  
 sendmail=NO             sendmail_flags="-bd -q30m"  
 postfix=NO  
 lpd=NO                  lpd_flags="-s"          # -s "secure" unix domain only  
   
 # Routing daemons  
 routed=NO               routed_flags="-q"  
 gated=NO                gated_flags=""  
 mrouted=NO              mrouted_flags=""  
 route6d=NO              route6d_flags=""  
 rtsold=NO               rtsold_flags=""         # for ip6mode=autohost only  
   
 # Daemons used to boot other hosts over a network  
 rarpd=NO                rarpd_flags="-a"  
 bootparamd=NO           bootparamd_flags=""  
 dhcpd=NO                dhcpd_flags="-q"  
 dhcrelay=NO             dhcrelay_flags=""  
 rbootd=NO               rbootd_flags=""  
 mopd=NO                 mopd_flags="-a"  
 rtadvd=NO               rtadvd_flags=""  
   
 # X11 daemons:  
 xfs=NO                  xfs_flags=""            # X11 font server  
 xdm=NO                  xdm_flags=""            # X11 display manager  
   
 # YP (NIS) daemons  
 ypbind=NO               ypbind_flags=""  
 ypserv=NO               ypserv_flags="-d"  
 yppasswdd=NO            yppasswdd_flags=""  
   
 # NFS daemons and parameters  
 nfs_client=NO                                   # enable client daemons  
 nfs_server=NO                                   # enable server daemons  
                         mountd_flags=""  
                         nfsd_flags="-6tun 4"  
 lockd=NO                lockd_flags=""  
 statd=NO                statd_flags=""  
 amd=NO                  amd_flags="-l syslog -x error,noinfo,nostats"  
                         amd_dir=/amd                    # mount dir  
                         amd_master=/etc/amd/master      # master map  
   
 # Other daemons  
 rwhod=NO  
 kerberos=NO  
   
 # Hardware daemons  
 apmd=NO                 apmd_flags=""           # APM power management daemon.  
 screenblank=NO          screenblank_flags=""    # wscons and FBIO screenblanker  
   
 # configuration of "wscons" console driver virtual screens  
 wscons=NO               wscons_flags=""         # run /etc/rc.wscons  
   
 # Add local configurations  
 if [ -f /etc/rc.local.conf ]; then  
         . /etc/rc.local.conf  
 fi  

Legend:
Removed from v.1.85  
changed lines
  Added in v.1.85.2.8

CVSweb <webmaster@jp.NetBSD.org>