Annotation of src/etc/gettytab, Revision 1.18
1.18 ! dsl 1: # $NetBSD: gettytab,v 1.17 2003/04/04 16:43:38 perry Exp $
1.8 mikel 2: # from: @(#)gettytab 8.2 (Berkeley) 4/20/94
1.1 cgd 3: #
4: # Most of the table entries here are just copies of the old getty table,
5: # it is by no means certain, or even likely, that any of them are optimal
6: # for any purpose whatever. Nor is it likely that more than a couple are
7: # even correct.
8: #
9: # The default gettytab entry, used to set defaults for all other
10: # entries, and in cases where getty is called with no table name
11: #
12: default:\
1.16 thorpej 13: :ce:ck:np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:
1.1 cgd 14:
15: #
16: # Fixed speed entries
17: #
18: # The "std.NNN" names are known to the special case
19: # portselector code in getty, however they can
20: # be assigned to any table desired.
21: # The "NNN-baud" names are known to the special case
22: # autobaud code in getty, and likewise can
23: # be assigned to any table desired (hopefully the same speed).
24: #
1.10 perry 25: std.110|110-baud:\
26: :sp#110:
27: std.300|300-baud:\
28: :sp#300:
29: std.600|600-baud:\
30: :sp#600:
31: std.1200|1200-baud:\
32: :sp#1200:
33: std.2400|2400-baud:\
1.1 cgd 34: :sp#2400:
1.10 perry 35: std.4800|4800-baud:\
1.1 cgd 36: :sp#4800:
1.10 perry 37: std.9600|9600-baud:\
1.1 cgd 38: :sp#9600:
1.10 perry 39: std.19200|19200-baud:\
1.1 cgd 40: :sp#19200:
1.3 mycroft 41: std.38400|38400-baud:\
42: :sp#38400:
43: std.57600|57600-baud:\
44: :sp#57600:
45: std.115200|115200-baud:\
46: :sp#115200:
1.12 fair 47:
48: # PPP network link login
49: #
50: # these entries can be used by ISPs or others who want to be able
51: # to offer both a "shell" and a PPP login on the same port. Setting
52: # the "pp" attribute allows getty(8) to recognize a PPP link start
53: # negotiation, and invoke the program listed, in addition to normal
54: # login(1).
55: #
56: # N.B.: if PPP is recognized, this bypasses normal login/password
57: # exchange; the expectation is that you'll configure pppd (or whatever)
58: # to require a PAP or CHAP handshake for authentication after PPP is
59: # started up.
60: #
61: # It is also recommended that you use hardware (CTS/RTS) flow control
62: # on the port, and run the port as fast as possible, to allow modems
63: # extra time to do data compression, if enabled.
64: #
65: ppp:np:ce:ck:pp=/usr/sbin/pppd:
66: #
67: ppp.19200|PPP-19200:sp#19200:tc=ppp:
68: ppp.38400|PPP-38400:sp#38400:tc=ppp:
69: ppp.57600|PPP-57600:sp#57600:tc=ppp:
70: ppp.115200|PPP-115200:sp#115200:tc=ppp:
71: ppp.230400|PPP-230400:sp#230400:tc=ppp:
1.1 cgd 72:
73: #
74: # Dial in rotary tables, speed selection via 'break'
75: #
76: d1200|Dial-1200:\
1.10 perry 77: :nx=d300:sp#1200:
78: d300|Dial-300:\
79: :nx=d1200:sp#300:
1.1 cgd 80:
81: #
82: # Fast dialup terminals, 2400/1200/300 rotary (can start either way)
83: #
84: D2400|d2400|Fast-Dial-2400:\
85: :nx=D1200:tc=2400-baud:
1.10 perry 86: D1200|Fast-Dial-1200:\
1.1 cgd 87: :nx=D300:tc=1200-baud:
1.10 perry 88: D300|Fast-Dial-300:\
1.1 cgd 89: :nx=D2400:tc=300-baud:
90:
91: #
92: #telebit (19200)
93: #
94: t19200:\
95: :nx=t2400:tc=19200-baud:
96: t2400:\
97: :nx=t1200:tc=2400-baud:
98: t1200:\
99: :nx=t19200:tc=1200-baud:
100:
101: #
102: #telebit (9600)
103: #
104: t9600:\
105: :nx=t2400a:tc=19200-baud:
106: t2400a:\
107: :nx=t1200a:tc=2400-baud:
108: t1200a:\
109: :nx=t9600:tc=1200-baud:
110:
111: #
112: # Odd special case terminals
113: #
1.10 perry 114: Console|Console Decwriter II:\
115: :rw:tc=300-baud:
1.1 cgd 116:
1.10 perry 117: Console-1200|Console Decwriter III:\
118: :rw:tc=1200-baud:
1.1 cgd 119:
120: X|Xwindow|X window system:\
1.10 perry 121: :rw:sp#9600:
1.1 cgd 122:
1.10 perry 123: Pc|Pc console:\
1.18 ! dsl 124: :np:ig:ht:
1.6 pk 125:
126: # 8 bit clean Sun console
1.10 perry 127: suncons|Sun Console:\
1.6 pk 128: :np:sp#9600:
1.1 cgd 129:
130: #
131: # Plugboard, and misc other terminals
132: #
133: plug-9600|Plugboard-9600:\
134: :pf#1:tc=9600-baud:
1.10 perry 135: P9600|Plugboard-9600-rotary:\
1.1 cgd 136: :pf#1:nx=P300:tc=9600-baud:
1.10 perry 137: P300|Plugboard-300:\
1.1 cgd 138: :pf#1:nx=P1200:tc=300-baud:
1.10 perry 139: P1200|Plugboard-1200:\
1.1 cgd 140: :pf#1:nx=P9600:tc=1200-baud:
141:
142: #
143: # XXXX Port selector
144: #
1.10 perry 145: DSW|Port Selector:\
1.1 cgd 146: :ps:sp#2400:
147:
148: #
149: # Auto-baud speed detect entry for Micom 600.
150: # Special code in getty will switch this out
151: # to one of the NNN-baud entries.
152: #
1.10 perry 153: Auto-baud:\
1.1 cgd 154: :ab:sp#2400:f0#040:
CVSweb <webmaster@jp.NetBSD.org>