CVS log for src/etc/etc.evbppc/MAKEDEV.conf

Up to [cvs.NetBSD.org] / src / etc / etc.evbppc

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

etc.evbppc/MAKEDEV.conf: drop unused block and fix comment

viocon(4): New virtio tty driver imported from OpenBSD.

viocon* at virtio?

/dev/ttyVI??

Tested under qemu with:

qemu-system-aarch64 ... \
  -device virtio-serial \
  -chardev socket,path=/tmp/ttyVI00,server=on,wait=off,id=ttyVI00 \
  -device virtconsole,chardev=ttyVI00,name=org.NetBSD.dev.ttyVI00 \
  ...

I updated MAKEDEV.conf to create /dev/ttyVI?? on all ports where it
looks likely to work based on:
(a) having pci or a non-pci virtio attachment,
(b) `qemu-system-$ARCH -M ?' mentioned something resembling the port,
    and
(c) `qemu-system-$ARCH -device virtio-serial' launched without
    complaining about the virtio-serial device.

(Criterion (c) excluded sparc and sparc64.)

Add nvme(4) and raid(4).

Sync with HEAD

Ssync with HEAD

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

Sync with HEAD.  (Note that most of these changes are simply $NetBSD$
tag issues.)

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

sync with head

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
  which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl.  There are
also a few instances of slightly different changes in the
case patterns.

Sync with HEAD

Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.

The commit includes:
 - Flash layer, which gives a common API to access flash devices
 - NAND controller subsystem for the flash layer
 - An example OMAP driver which is used on BeagleBoard or alike ARM boards

Sync with HEAD.

Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf.  Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

Pull up following revision(s) (requested by hubertf in ticket #429):
	etc/etc.bebox/MAKEDEV.conf: revision 1.5
	etc/etc.x68k/MAKEDEV.conf: revision 1.8
	etc/etc.next68k/MAKEDEV.conf: revision 1.3
	etc/etc.ofppc/MAKEDEV.conf: revision 1.5
	etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
	etc/etc.amd64/MAKEDEV.conf: revision 1.8
	etc/etc.algor/MAKEDEV.conf: revision 1.4
	etc/etc.sparc64/MAKEDEV.conf: revision 1.12
	etc/etc.hp300/MAKEDEV.conf: revision 1.11
	etc/etc.sgimips/MAKEDEV.conf: revision 1.8
	etc/etc.pc532/MAKEDEV.conf: revision 1.5
	etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
	etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
	etc/etc.pmppc/MAKEDEV.conf: revision 1.6
	etc/etc.cobalt/MAKEDEV.conf: revision 1.4
	etc/etc.evbmips/MAKEDEV.conf: revision 1.4
	etc/etc.sparc/MAKEDEV.conf: revision 1.11
	etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
	etc/etc.i386/MAKEDEV.conf: revision 1.12
	etc/etc.acorn32/MAKEDEV.conf: revision 1.8
	etc/etc.evbppc/MAKEDEV.conf: revision 1.5
	etc/etc.amiga/MAKEDEV.conf: revision 1.10
	etc/etc.prep/MAKEDEV.conf: revision 1.4
	etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
	etc/MAKEDEV.tmpl: revision 1.71
	etc/etc.alpha/MAKEDEV.conf: revision 1.7
	etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
	etc/etc.macppc/MAKEDEV.conf: revision 1.7
	etc/etc.mmeye/MAKEDEV.conf: revision 1.5
	etc/etc.mac68k/MAKEDEV.conf: revision 1.7
	etc/etc.vax/MAKEDEV.conf: revision 1.10
	etc/etc.arc/MAKEDEV.conf: revision 1.6
	etc/etc.hp700/MAKEDEV.conf: revision 1.4
	etc/etc.mipsco/MAKEDEV.conf: revision 1.3
	etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

Welcome to evbppc/virtex -- port to Xilinx Virtex series FPGA's with embedded
ibm405d5 core.

OK by Simon Burge

Rework MAKEDEV:

    *	Use "mknod -F netbsd -r" to create nodes, instead of
	"rm ; mknod; chmod; chown".
	This means permissions & ownership of existing nodes will
	not be changed.
	This is up to 30% faster when populating an empty /dev,
	and nearly 2x faster when re-running on an existing /dev.

    *	New options:
    	-f		force change of permission & ownership of existing
			devices
    	-m mknod	override name/path of mknod program
			(which defaults to $TOOL_MKNOD, then "mknod").
	-s		generate mtree(8) specfile instead of creating devices

    *	Remove /usr/etc from $PATH; not needed anymore.

    *	Provide functions to create devices & directories:
	    mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
		create device node `name' with the appropriate permissions
	    lndev src target
		create a symlink from src to target
	    makedir dir mode
		create directory with appropriate mode

    *	UIDs and GIDs are hardcoded in at MAKEDEV generation time.
	(Unfortunately there's not a simple way of determining a GID
	a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl