File: [cvs.NetBSD.org] / src / etc / Makefile (download)
Revision 1.267, Sun Jan 4 23:55:11 2004 UTC (20 years, 3 months ago) by lukem
Branch: MAIN
Changes since 1.266: +2 -2
lines
Rename /etc/release-info to /etc/release, to be consistent with other
implementations and Hubert's original intent.
|
# $NetBSD: Makefile,v 1.267 2004/01/04 23:55:11 lukem Exp $
# from: @(#)Makefile 8.7 (Berkeley) 5/25/95
# Environment variables without default values:
# DESTDIR must be set before anything in this file will work.
# RELEASEDIR is where the tarred up stuff for a snapshot or
# release will be placed.
#
# Environment variables with default values:
# LOCALTIME will set the default local time for the system you
# build; it determines what /etc/localtime is symlink'd to.
# KERNSRCDIR points to kernel source; it is set by default to ../sys,
# but can be overridden.
# KERNOBJDIR is the kernel build directory, it defaults to
# ${KERNSRCDIR}/arch/${MACHINE}/compile, but can be overridden.
# KERNCONFDIR is where the configuration files for kernels are found;
# default is ${KERNSRCDIR}/arch/${MACHINE}/conf but can be overridden.
# MKUPDATE; if not `no', don't do a 'make clean' before kernel compile
# NO_SENDMAIL is normally undefined; if defined, it will not do a
# `make distribution' in the sendmail config file source directory.
#
# Targets:
# distribution: makes a full NetBSD distribution in DESTDIR. If
# INSTALL_DONE is set, it will not do a `make install.'
# if DISTRIBUTION_DONE is set, it will not do anything.
# distrib-dirs: creates an empty NetBSD directory tree in DESTDIR.
# Called by distribution.
# snapshot: calls distribution, above, and then tars up the files
# into a release(7) format in RELEASEDIR/${MACHINE}.
# Any port-dependent stuff for this target is found in
# etc.${MACHINE}/Makefile.inc.
# release: a synonym for `snapshot'
#
# For NO_SENDMAIL, INSTPRIV, MKCRYPTO
#
.include <bsd.own.mk>
.include <bsd.sys.mk> # for HOST_SH
.include <bsd.kernobj.mk> # For KERNSRCDIR, KERNOBJDIR, ...
.include <bsd.endian.mk> # For TARGET_ENDIANNESS
.MAKEOVERRIDES+= USETOOLS
TZDIR= /usr/share/zoneinfo
LOCALTIME?= UTC
MAKESUMS= CKSUM=${TOOL_CKSUM:Q} ${HOST_SH} ${NETBSDSRCDIR}/distrib/sets/makesums
DISTRIBVER!= ${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh
# Flags for creating ISO CDROM image
# mkisofs is expected to be in $PATH, install via pkgsrc/sysutils/cdrecord
# Note: At least mkisofs 2.0 should be used.
#
MKISOFS?= mkisofs
DISTRIBREV!= ${HOST_SH} ${KERNSRCDIR}/conf/osrelease.sh -s
# ISO 9660 volume ID. Note that this can only contain [A-Z0-9_].
ISO_VOLID!= echo NETBSD_${MACHINE}_${DISTRIBREV} | tr a-z A-Z
MKISOFS_FLAGS+= -J -l \
-r -T -v \
-V ${ISO_VOLID} \
-P "The NetBSD Project" \
-m "${RELEASEDIR}/${MACHINE}/installation/cdrom"
# MD Makefile.inc may append MD targets to BIN[123]. Make sure all
# are empty, to preserve the old semantics of setting them below with "=".
#
BIN1=
BIN2=
BIN3=
# Directories to build in ${RELEASEDIR}/${MACHINE}.
# MD Makefile.inc files can add to this.
# NOTE: Parent directories must be listed before subdirectories.
#
INSTALLATION_DIRS= binary binary/sets binary/kernel installation
.if exists(etc.${MACHINE}/Makefile.inc)
.include "etc.${MACHINE}/Makefile.inc"
.endif
# -rw-r--r--
BINOWN= root
BINGRP= wheel
UTMPGRP= utmp
BIN1+= bootptab changelist csh.cshrc csh.login csh.logout daily \
daily.conf dm.conf floppytab ftpchroot ftpusers \
gettytab group hosts hosts.lpd inetd.conf lkm.conf \
mailer.conf man.conf monthly monthly.conf mrouted.conf \
netconfig networks newsyslog.conf nsswitch.conf ntp.conf \
passwd.conf phones printcap profile protocols rbootd.conf rc rc.conf \
rc.lkm rc.local rc.subr rc.shutdown remote rpc \
security security.conf services shells sysctl.conf syslog.conf \
weekly weekly.conf wscons.conf \
etc.${MACHINE}/ttys
# Use machine-specific disktab if it exists, or the MI one otherwise
.if exists(etc.${MACHINE}/disktab)
BIN1+= etc.${MACHINE}/disktab
.else
BIN1+= disktab
.endif
.if exists(etc.${MACHINE}/ld.so.conf)
BIN1+= etc.${MACHINE}/ld.so.conf
.endif
.if exists(etc.${MACHINE}/ttyaction)
BIN1+= etc.${MACHINE}/ttyaction
.endif
# -rw-rw-r--
BIN2+= motd
# -rw-------
BIN3+= hosts.equiv
ETC_PKG=-T etc_pkg
BASE_PKG=-T base_pkg
ETC_INSTALL_FILE=cd ${.CURDIR} && ${INSTALL_FILE} ${ETC_PKG}
ETC_INSTALL_OBJ_FILE=cd ${.OBJDIR} && ${INSTALL_FILE} ${ETC_PKG}
ETC_INSTALL_LINK=cd ${.CURDIR} && ${INSTALL_LINK} ${ETC_PKG}
ETC_INSTALL_SYMLINK=cd ${.CURDIR} && ${INSTALL_SYMLINK} ${ETC_PKG}
NAMEDB= 127 root.cache named.conf localhost loopback.v6
.if ${TARGET_ENDIANNESS} == "1234"
PWD_MKDB_ENDIAN= -L
.elif ${TARGET_ENDIANNESS} == "4321"
PWD_MKDB_ENDIAN= -B
.else
PWD_MKDB_ENDIAN=
.endif
# distribution --
# Build a distribution
#
distribution: check_DESTDIR .WAIT distrib-dirs
.if !defined(DISTRIBUTION_DONE)
.if !defined(INSTALL_DONE)
(cd ${NETBSDSRCDIR}; ${MAKE} _DISTRIB= includes)
(cd ${NETBSDSRCDIR}; ${MAKE} _DISTRIB= install)
.endif # !INSTALL_DONE
(cd ${.CURDIR}; ${MAKE} install-etc-files)
.endif # !DISTRIBUTION_DONE
.PHONY: MAKEDEV release-info
CLEANFILES+= MAKEDEV release-info
MAKEDEV:
${_MKTARGET_CREATE}
MACHINE=${MACHINE:Q} MACHINE_ARCH=${MACHINE_ARCH:Q} \
NETBSDSRCDIR=${NETBSDSRCDIR:Q} \
awk -f ${.CURDIR}/MAKEDEV.awk ${.CURDIR}/MAKEDEV.tmpl > ${.TARGET}
RELEASEVARS= BSDOBJDIR BSDSRCDIR BUILDID \
DESTDIR EXTERNAL_TOOLCHAIN \
INSTALLWORLDDIR \
KERNARCHDIR KERNCONFDIR KERNOBJDIR KERNSRCDIR \
MACHINE MACHINE_ARCH MAKE MAKECONF MAKEFLAGS \
MAKEOBJDIR MAKEOBJDIRPREFIX MAKEVERBOSE \
MKCATPAGES MKCRYPTO MKDOC MKHOSTOBJ MKINFO \
MKLINT MKMAN MKNLS MKOBJ MKOBJDIRS \
MKPIC MKPICINSTALL MKPROFILE MKSHARE \
MKUNPRIVED MKUPDATE \
NBUILDJOBS \
NOCLEANDIR NODISTRIBDIRS NOINCLUDES \
RELEASEDIR TOOLCHAIN_MISSING TOOLDIR USETOOLS
release-info:
${_MKTARGET_CREATE}
@( echo "NetBSD ${DISTRIBVER}/${MACHINE}"; \
echo " $$(date -u) $${USER-root}@$$(hostname)"; \
echo ; \
echo "Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004" ; \
echo " The NetBSD Foundation, Inc. All rights reserved."; \
echo "Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994"; \
echo " The Regents of the University of California. All rights reserved."; \
echo ; \
echo "Build settings:"; \
) >${.TARGET}
.for var in ${RELEASEVARS}
.if defined(${var})
@printf "%20s = '%-s'\n" ${var} ${${var}:Q} >> ${.TARGET}
.else
@printf "%20s = (undefined)\n" ${var} >> ${.TARGET}
.endif
.endfor
install-release-info: check_DESTDIR release-info
${_MKMSG_INSTALL} etc/release-info
${ETC_INSTALL_OBJ_FILE} -o ${BINOWN} -g ${BINGRP} -m 444 \
release-info ${DESTDIR}/etc/release
# install-etc-files --
# Install etc (config) files; not performed by "make build"
#
install-etc-files: check_DESTDIR MAKEDEV
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
${BIN1} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 664 \
${BIN2} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
${BIN3} ${DESTDIR}/etc
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
aliases ${DESTDIR}/etc/mail
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/etc/mail/local-host-names
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
crontab ${DESTDIR}/var/cron/tabs/root
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
master.passwd ${DESTDIR}/etc
${TOOL_PWD_MKDB} -p ${PWD_MKDB_ENDIAN} -d ${DESTDIR}/ \
${DESTDIR}/etc/master.passwd
.if ${MKUNPRIVED} != "no"
( \
for metaent in passwd pwd.db spwd.db; do \
echo "./etc/$${metaent} type=file mode=0644 uname=root gname=wheel tags=etc_pkg"; \
done; \
) | ${METALOG.add}
.endif # MKUNPRIVED != no
${ETC_INSTALL_OBJ_FILE} -o ${BINOWN} -g ${BINGRP} -m 555 \
MAKEDEV ${DESTDIR}/dev
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 555 \
MAKEDEV.local ${DESTDIR}/dev
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
minfree ${DESTDIR}/var/crash
.for file in cshrc login profile shrc
${ETC_INSTALL_FILE} -o root -g wheel -m 644 \
root/dot.${file} ${DESTDIR}/root/.${file}
.endfor
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
root/dot.klogin ${DESTDIR}/root/.klogin
rm -f ${DESTDIR}/.cshrc ${DESTDIR}/.profile
${ETC_INSTALL_LINK} ${DESTDIR}/root/.cshrc ${DESTDIR}/.cshrc
${ETC_INSTALL_LINK} ${DESTDIR}/root/.profile ${DESTDIR}/.profile
(cd ${.CURDIR}/defaults; ${MAKE} install)
(cd ${.CURDIR}/mtree; ${MAKE} install)
.for file in ${NAMEDB}
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
namedb/${file} ${DESTDIR}/etc/namedb
.endfor
(cd ${.CURDIR}/powerd; ${MAKE} install)
(cd ${.CURDIR}/rc.d; ${MAKE} install)
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
postinstall ${DESTDIR}/etc
${ETC_INSTALL_SYMLINK} -o root -g wheel -m 755 \
${TZDIR}/${LOCALTIME} ${DESTDIR}/etc/localtime
${ETC_INSTALL_SYMLINK} -o root -g wheel -m 755 \
/usr/sbin/rmt ${DESTDIR}/etc/rmt
${ETC_INSTALL_FILE} -o ${BINOWN} -g operator -m 664 \
/dev/null ${DESTDIR}/etc/dumpdates
${ETC_INSTALL_FILE} -o ${BINOWN} -g operator -m 600 \
/dev/null ${DESTDIR}/etc/skeykeys
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
/dev/null ${DESTDIR}/var/at/at.deny
${ETC_INSTALL_FILE} -o nobody -g ${BINGRP} -m 664 \
/dev/null ${DESTDIR}/var/db/locate.database
${ETC_INSTALL_FILE} -o uucp -g dialer -m 640 \
/dev/null ${DESTDIR}/var/log/aculog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/authlog
${ETC_INSTALL_FILE} -o root -g wheel -m 600 \
/dev/null ${DESTDIR}/var/log/cron
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 664 \
/dev/null ${DESTDIR}/var/log/lastlog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 640 \
/dev/null ${DESTDIR}/var/log/lpd-errs
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/maillog
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/messages
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/secure
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/sendmail.st
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/wtmp
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
/dev/null ${DESTDIR}/var/log/wtmpx
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 600 \
/dev/null ${DESTDIR}/var/log/xferlog
${ETC_INSTALL_FILE} -o daemon -g staff -m 664 \
/dev/null ${DESTDIR}/var/msgs/bounds
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${UTMPGRP} -m 664 \
/dev/null ${DESTDIR}/var/run/utmp
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${UTMPGRP} -m 664 \
/dev/null ${DESTDIR}/var/run/utmpx
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/atc_score
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/battlestar.log
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/cfscores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/criblog
${ETC_INSTALL_FILE} -o games -g games -m 660 \
/dev/null ${DESTDIR}/var/games/hackdir/perm
${ETC_INSTALL_FILE} -o games -g games -m 660 \
/dev/null ${DESTDIR}/var/games/hackdir/record
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/llog12.0
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/lscore12.0
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/larn/playerids
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/robots_roll
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/rogue.scores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/saillog
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/snakerawscores
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/snake.log
${ETC_INSTALL_FILE} -o games -g games -m 664 \
/dev/null ${DESTDIR}/var/games/tetris.scores
(cd ${.CURDIR}/skel; ${MAKE} distribution)
(cd ${NETBSDSRCDIR}/usr.bin/mail; ${MAKE} distribution)
(cd ${NETBSDSRCDIR}/gnu/usr.sbin/postfix/; ${MAKE} distribution)
.if (${MKCRYPTO} != "no")
(cd ${NETBSDSRCDIR}/usr.bin/ssh; ${MAKE} distribution)
.endif
.if !defined(NO_SENDMAIL) || ${NO_SENDMAIL} == "no"
(cd ${NETBSDSRCDIR}/gnu/usr.sbin/sendmail/cf/cf; ${MAKE} distribution)
.endif
# install-obsolete-lists --
# Install var/db/obsolete set lists; this is performed by "make build"
#
OBSOLETE.dir= ${.OBJDIR}/obsolete.dir
OBSOLETE.files= base comp etc games man misc text
install-obsolete-lists:
mkdir -p ${OBSOLETE.dir}
(cd ${NETBSDSRCDIR}/distrib/sets && \
MAKE=${MAKE:Q} ${HOST_SH} ./makeobsolete -t ${OBSOLETE.dir})
.for file in ${OBSOLETE.files}
${ETC_INSTALL_FILE} -o ${BINOWN} -g ${BINGRP} -m 644 \
${OBSOLETE.dir}/${file} ${DESTDIR}/var/db/obsolete
.endfor
# distrib-dirs --
# Populate $DESTDIR with directories needed by NetBSD
#
.if ${MKUNPRIVED} == "no"
TOOL_MTREE.unpriv=
.else
TOOL_MTREE.unpriv= -W
.endif
distrib-dirs: check_DESTDIR
.if !defined(DISTRIBUTION_DONE)
${INSTALL_DIR} -o root -g wheel -m 755 ${BASE_PKG} ${DESTDIR}
.endif
${TOOL_MTREE} -def ${.CURDIR}/mtree/NetBSD.dist -N ${.CURDIR} \
-p ${DESTDIR}/ -U ${TOOL_MTREE.unpriv}
# release, snapshot --
# Build a full distribution including kernels & install media.
#
release snapshot: check_DESTDIR check_RELEASEDIR .WAIT \
distribution .WAIT \
snap_pre .WAIT snap_kern .WAIT \
snap_post .WAIT snap_md_post
(cd ${NETBSDSRCDIR}/distrib/sets; ${MAKE} sets)
${MAKESUMS} -t ${RELEASEDIR}/${MACHINE}/binary/kernel '*.gz'
# iso-image --
# Standalone target to create a CDROM image after the release
# was composed. Should be run after "make release" in src and xsrc.
#
# Note: At least mkisofs 2.0 should be used.
#
CDROM.image=${RELEASEDIR}/${MACHINE}/installation/cdrom/netbsd-${MACHINE}.iso
CDROM.dir= cdrom.dir
CDROM.pathlist= cdrom.pathlist
iso-image: check_DESTDIR check_RELEASEDIR .WAIT iso-image-md-post
${MAKESUMS} -t ${RELEASEDIR}/${MACHINE}/installation/cdrom '*.iso'
@echo "iso-image created as: ${CDROM.image}"
iso-image-setup: check_RELEASEDIR
rm -f ${CDROM.pathlist}
echo "${MACHINE}=${RELEASEDIR}/${MACHINE}" >> ${CDROM.pathlist}
mkdir -p ${CDROM.dir}
mkdir -p ${RELEASEDIR}/${MACHINE}/installation/cdrom
# iso-image-mi --
# Create the image after the MD operations have completed.
#
iso-image-mi: check_DESTDIR check_RELEASEDIR .WAIT \
iso-image-setup .WAIT iso-image-md-pre
@if ! ${MKISOFS} --version; then \
echo "install pkgsrc/sysutils/cdrecord and run 'make iso-image'." ; \
false; \
fi
${MKISOFS} ${MKISOFS_FLAGS} -graft-points -path-list ${CDROM.pathlist} \
-o ${CDROM.image} ${CDROM.dir}
# iso-image-md-pre --
# Setup ${CDROM.dir} to produce a bootable CD image.
# Overridden by etc.$MACHINE/Makefile.inc
#
iso-image-md-pre: check_DESTDIR check_RELEASEDIR
# (empty -- look in the machine-dependent Makefile.inc)
# iso-image-md-post --
# Fixup the CD-image to be bootable.
# Overridden by etc.$MACHINE/Makefile.inc
#
iso-image-md-post: check_DESTDIR check_RELEASEDIR .WAIT iso-image-mi
# (empty -- look in the machine-dependent Makefile.inc)
# snap_pre --
# Create ${RELEASEDIR} and necessary subdirectories.
#
snap_pre: check_DESTDIR check_RELEASEDIR
${INSTALL} -d -m 755 ${RELEASEDIR}
.if ${MKUPDATE} == "no"
# Could be a mount point, ignore the errors
-/bin/rm -rf ${RELEASEDIR}/${MACHINE}
.endif
${INSTALL} -d -m 755 ${RELEASEDIR}/${MACHINE}
.for dir in ${INSTALLATION_DIRS}
${INSTALL} -d -m 755 ${RELEASEDIR}/${MACHINE}/${dir}
.endfor
# snap_post --
# Build the install media and notes from distrib
#
snap_post: check_DESTDIR check_RELEASEDIR
.if ${MKUPDATE} == "no"
cd ${NETBSDSRCDIR}/distrib && ${MAKE} cleandir
.endif
cd ${NETBSDSRCDIR}/distrib && ${MAKE} depend && ${MAKE} && \
${MAKE} release
# snap_kern --
# This target builds the kernels specified by each port.
# A port may specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernel
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernel area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernel area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
# A port may also specify KERNEL_SUFFIXES, which is an optional list
# of filename suffixes for kernels to include in the kernel sets and
# in the binary/kernel area of the release package (e.g. "netbsd" vs.
# "netbsd.ecoff" and "netbsd.srec"). It is not an error if kernels
# with these suffixes do not exist in the kernel build directory.
#
#
# A list of all the kernels to build, which can be overridden from
# external sources (such as make(1)'s environment or command line)
#
ALL_KERNELS?= ${KERNEL_SETS} ${EXTRA_KERNELS} ${BUILD_KERNELS}
GETKERNELAWK= awk '/^config/ {print $$2; found=1} \
END{ if (found == 0) print "netbsd"; }'
.if !target(snap_kern) # {
# build_kernels --
# Configure & compile kernels listed in ${ALL_KERNELS}
#
.if !defined(KERNELS_DONE) # {
.for configfile in ${ALL_KERNELS} # {
_KERNELS_TO_BUILD+=kern-${configfile}
kern-${configfile}:
cd ${KERNCONFDIR} && ${TOOL_CONFIG} -s ${KERNSRCDIR} \
-b ${KERNOBJDIR}/${configfile:C/.*\///} ${configfile}
.if ${MKUPDATE} == "no"
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} distclean
.endif
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} depend && ${MAKE}
.endfor # ALL_KERNELS # }
.endif # KERNELS_DONE # }
build_kernels: ${_KERNELS_TO_BUILD}
# build_kernelsets --
# Create kernel sets from ${KERNEL_SETS} into
# ${RELEASEDIR}/${MACHINE}/binary/sets
#
.for configfile in ${KERNEL_SETS} # {
_KERNELSETS_TO_BUILD+=kernset-${configfile}
kernset-${configfile}:
@ kernlist=`${GETKERNELAWK} ${KERNCONFDIR}/${configfile}`; \
kerndir=${KERNOBJDIR}/${configfile:C/.*\///}; \
kernsuffixes="${KERNEL_SUFFIXES:S/^/./}"; \
kern_tgz=${RELEASEDIR}/${MACHINE}/binary/sets/kern-${configfile}.tgz; \
pax_cmd="GZIP=-9 ${TOOL_PAX} -O -zw -M -N ${NETBSDSRCDIR}/etc -f $${kern_tgz}"; \
cd $${kerndir} && { \
kernels=; newest=; \
for kernel in $${kernlist}; do \
for s in "" $${kernsuffixes}; do \
ks="$${kernel}$${s}"; \
[ -f $${ks} ] || continue; \
kernels="$${kernels} $${ks}"; \
[ -z "$${newest}" -o $${ks} -nt "$${newest}" ] && \
newest=$${ks}; \
done; \
done; \
[ $${kern_tgz} -nt "$${newest}" ] || { \
echo "echo $${kernels} | $${pax_cmd}"; \
( echo "/set uname=${BINOWN} gname=${BINGRP}"; \
echo ". type=dir optional"; \
for kernel in $${kernels}; do \
echo "./$${kernel} type=file"; \
done ) | eval $${pax_cmd}; \
} \
}
.endfor # KERNEL_SETS # }
build_kernelsets: ${_KERNELSETS_TO_BUILD}
# build_releasekernels --
# Build kernel.gz from ${KERNEL_SETS} ${EXTRA_KERNELS} into
# ${RELEASEDIR}/${MACHINE}/binary/kernel
#
.for configfile in ${KERNEL_SETS} ${EXTRA_KERNELS} # {
_RELEASEKERNELS_TO_BUILD+=releasekern-${configfile}
releasekern-${configfile}:
@ kernlist=`${GETKERNELAWK} ${KERNCONFDIR}/${configfile:C/.*\///}`; \
kerndir=${KERNOBJDIR}/${configfile:C/.*\///}; \
kernsuffixes="${KERNEL_SUFFIXES:S/^/./}"; \
cd $${kerndir} && { \
for kernel in $${kernlist}; do \
for s in "" $${kernsuffixes}; do \
ks="$${kernel}$${s}"; \
[ ! -f $${ks} ] && continue; \
knl_gz="${RELEASEDIR}/${MACHINE}/binary/kernel/$${ks}-${configfile:C/.*\///}.gz"; \
[ $${knl_gz} -nt $${ks} ] && continue; \
echo "gzip -c -9 < $${kerndir}/$${ks} > $${knl_gz}"; \
gzip -c -9 < $${ks} > $${knl_gz}; \
done; \
done; \
}
.endfor # KERNEL_SETS EXTRA_KERNELS # }
build_releasekernels: ${_RELEASEKERNELS_TO_BUILD}
# snap_kern --
# build the kernels, then the sets & release kernels
#
snap_kern: check_DESTDIR check_RELEASEDIR .WAIT \
build_kernels .WAIT \
build_kernelsets build_releasekernels
.endif # !target(snap_kern) # }
# snap_md_post --
# Machine dependent distribution media operations.
# Overridden by etc.$MACHINE/Makefile.inc
#
snap_md_post: check_DESTDIR check_RELEASEDIR
# (empty -- look in the machine-dependent Makefile.inc)
clean:
-rm -rf ${CDROM.dir} ${CDROM.pathlist} ${OBSOLETE.dir}
.include <bsd.prog.mk>
![[BACK]](/icons/back.gif){kind=icon}
Return to Makefile CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / etc