The NetBSD Project

CVS log for src/distrib/utils/embedded/conf/armv7.conf

[BACK] Up to [cvs.NetBSD.org] / src / distrib / utils / embedded / conf

Request diff between arbitrary revisions


Default branch: MAIN


Revision 1.46 / (download) - annotate - [select for diffs], Wed Apr 19 18:39:18 2023 UTC (10 months, 1 week ago) by brook
Branch: MAIN
CVS Tags: HEAD
Changes since 1.45: +2 -1 lines
Diff to previous 1.45 (colored)

Install /boot/boot.cfg with EFI bootloaders.

On ARM ports, the EFI boot loader handles a boot.cfg file if it
exists, but one is not installed by default.  In contrast, both the
i386 and amd64 ports do install boot.cfg by default.  Bring these
ports into agreement by installing boot.cfg on ARM ports with EFI boot
loaders.

Revision 1.45 / (download) - annotate - [select for diffs], Sat Nov 19 09:19:27 2022 UTC (15 months, 1 week ago) by yamt
Branch: MAIN
CVS Tags: netbsd-10-base, netbsd-10-0-RC5, netbsd-10-0-RC4, netbsd-10-0-RC3, netbsd-10-0-RC2, netbsd-10-0-RC1, netbsd-10
Changes since 1.44: +3 -3 lines
Diff to previous 1.44 (colored)

Update a few www.raspberrypi.com URLs

Revision 1.44 / (download) - annotate - [select for diffs], Wed May 27 21:53:04 2020 UTC (3 years, 9 months ago) by jmcneill
Branch: MAIN
CVS Tags: cjep_sun2x-base1, cjep_sun2x-base, cjep_sun2x, cjep_staticlib_x-base1, cjep_staticlib_x-base, cjep_staticlib_x
Changes since 1.43: +2 -7 lines
Diff to previous 1.43 (colored)

Move back to MBR based images for armv7 because Amlogic's bootloader (for
Amlogic S805 based boards) needs to be installed to sector 1, which
conflicts with the GPT header.

Revision 1.43 / (download) - annotate - [select for diffs], Mon May 25 11:11:52 2020 UTC (3 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.42: +3 -6 lines
Diff to previous 1.42 (colored)

No need to rename netbsd-GENERIC.img to kernel7.img

Revision 1.42 / (download) - annotate - [select for diffs], Mon May 25 11:06:49 2020 UTC (3 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.41: +7 -2 lines
Diff to previous 1.41 (colored)

Switch to GPT w/ hybrid MBR for armv7 images

Revision 1.41 / (download) - annotate - [select for diffs], Mon May 18 21:19:34 2020 UTC (3 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.40: +7 -24 lines
Diff to previous 1.40 (colored)

Separate devicetree .dts -> .dtb building from kernel builds. They are now
part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This
defaults to yes for earmv[67]* and aarch64, and no everywhere else.

Revision 1.23.4.3 / (download) - annotate - [select for diffs], Mon Apr 13 07:45:36 2020 UTC (3 years, 10 months ago) by martin
Branch: phil-wifi
Changes since 1.23.4.2: +21 -30 lines
Diff to previous 1.23.4.2 (colored) to branchpoint 1.23 (colored) next main 1.24 (colored)

Mostly merge changes from HEAD upto 20200411

Revision 1.23.4.2 / (download) - annotate - [select for diffs], Wed Apr 8 14:03:55 2020 UTC (3 years, 10 months ago) by martin
Branch: phil-wifi
Changes since 1.23.4.1: +3 -1 lines
Diff to previous 1.23.4.1 (colored) to branchpoint 1.23 (colored)

Merge changes from current as of 20200406

Revision 1.40 / (download) - annotate - [select for diffs], Mon Dec 16 11:00:30 2019 UTC (4 years, 2 months ago) by skrll
Branch: MAIN
CVS Tags: phil-wifi-20200421, phil-wifi-20200411, phil-wifi-20200406, is-mlppp-base, is-mlppp
Changes since 1.39: +3 -1 lines
Diff to previous 1.39 (colored)

Update to new RaspberryPi firware

commit 0c01dbefba45a08c47f8538d5a071a0fba6b7e83
Author: popcornmix <popcornmix@gmail.com>
Date:   Wed Dec 11 15:30:08 2019 +0000

and include firmware for RPI4

Firmware has bee updated to support mainline linux kernels as described in
https://github.com/raspberrypi/linux/issues/3237

Revision 1.35.2.1 / (download) - annotate - [select for diffs], Wed Nov 27 13:46:45 2019 UTC (4 years, 3 months ago) by martin
Branch: netbsd-9
CVS Tags: netbsd-9-3-RELEASE, netbsd-9-2-RELEASE, netbsd-9-1-RELEASE, netbsd-9-0-RELEASE, netbsd-9-0-RC2, netbsd-9-0-RC1
Changes since 1.35: +16 -29 lines
Diff to previous 1.35 (colored) next main 1.36 (colored)

Pull up following revision(s) (requested by jmcneill in ticket #491):

	sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
	sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
	sys/arch/arm/ti/ti_sysc.c: revision 1.1
	sys/arch/arm/ti/ti_rng.c: revision 1.1
	sys/arch/arm/ti/ti_rng.c: revision 1.2
	sys/dev/i2c/tps65950.c: file removal
	sys/arch/evbarm/conf/std.ti: file removal
	sys/dev/i2c/files.i2c: revision 1.101
	sys/dev/i2c/files.i2c: revision 1.102
	sys/dev/i2c/at24cxx.c: revision 1.32
	sys/dev/i2c/files.i2c: revision 1.103
	sys/dev/i2c/twl4030.c: revision 1.1
	sys/dev/i2c/files.i2c: revision 1.104
	sys/dev/i2c/twl4030.c: revision 1.2
	sys/dev/i2c/twl4030.c: revision 1.3
	sys/arch/arm/ti/ti_com.c: revision 1.6
	sys/arch/arm/ti/ti_com.c: revision 1.7
	sys/arch/arm/ti/ti_com.c: revision 1.8
	sys/dev/fdt/cpufreq_dt.c: revision 1.11
	sys/arch/arm/ti/ti_iic.c: revision 1.1
	sys/dev/fdt/cpufreq_dt.c: revision 1.12
	sys/arch/arm/ti/ti_usb.c: revision 1.1
	sys/arch/arm/ti/ti_iic.c: revision 1.2
	sys/dev/fdt/cpufreq_dt.c: revision 1.13
	sys/arch/arm/ti/ti_iic.c: revision 1.3
	sys/arch/arm/ti/ti_iic.c: revision 1.4
	sys/arch/evbarm/conf/files.ti: file removal
	sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
	sys/arch/arm/dts/omap3-n900.dts: revision 1.1
	sys/arch/arm/ti/ti_edma.h: revision 1.1
	sys/arch/evbarm/conf/OVERO_INSTALL: file removal
	sys/arch/arm/ti/ti_usbtll.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.5
	etc/etc.evbarm/Makefile.inc: revision 1.108
	sys/arch/arm/ti/files.ti: revision 1.6
	sys/dev/i2c/tps65217pmic.c: revision 1.13
	etc/etc.evbarm/Makefile.inc: revision 1.109
	sys/arch/arm/ti/files.ti: revision 1.7
	sys/dev/i2c/tps65217pmic.c: revision 1.14
	sys/arch/arm/ti/files.ti: revision 1.8
	sys/arch/arm/ti/files.ti: revision 1.9
	sys/dev/fdt/usbnopphy.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.55
	sys/arch/evbarm/conf/GENERIC: revision 1.56
	sys/arch/evbarm/conf/GENERIC: revision 1.57
	sys/arch/evbarm/conf/GENERIC: revision 1.58
	sys/arch/evbarm/conf/GENERIC: revision 1.59
	sys/arch/evbarm/conf/BEAGLEBONE: file removal
	sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
	sys/arch/arm/ti/ti_otgreg.h: revision 1.1
	sys/arch/arm/ti/ti_tptc.c: revision 1.1
	sys/arch/evbarm/conf/IGEPV2: file removal
	sys/arch/arm/ti/am3_prcm.c: revision 1.10
	sys/dev/i2c/tda19988.c: revision 1.1
	sys/arch/evbarm/conf/OVERO: file removal
	sys/dev/i2c/tda19988.c: revision 1.2
	sys/dev/i2c/tda19988.c: revision 1.3
	sys/arch/arm/ti/omap3_dss.c: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
	sys/arch/arm/ti/ti_omapintc.c: revision 1.2
	etc/etc.evbarm/Makefile.inc: revision 1.112
	etc/etc.evbarm/Makefile.inc: revision 1.113
	sys/arch/arm/ti/ti_div_clock.c: revision 1.1
	etc/etc.evbarm/Makefile.inc: revision 1.114
	sys/arch/evbarm/conf/N900: revision 1.32
	sys/arch/evbarm/conf/N900: revision 1.33
	distrib/utils/embedded/conf/armv7.conf: revision 1.36
	sys/arch/evbarm/conf/GENERIC: revision 1.60
	distrib/utils/embedded/conf/armv7.conf: revision 1.37
	sys/arch/arm/ti/omap2_nand.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.61
	sys/arch/arm/ti/omap2_nand.c: revision 1.2
	sys/arch/evbarm/conf/GENERIC: revision 1.62
	distrib/utils/embedded/conf/armv7.conf: revision 1.39
	sys/arch/evbarm/conf/GENERIC: revision 1.63
	sys/arch/arm/ti/ti_fb.c: revision 1.1
	sys/arch/evbarm/conf/GENERIC: revision 1.64
	sys/arch/evbarm/conf/GENERIC: revision 1.65
	sys/arch/evbarm/conf/GENERIC: revision 1.66
	sys/arch/evbarm/conf/GENERIC: revision 1.67
	sys/arch/arm/ti/ti_platform.c: revision 1.7
	sys/arch/arm/ti/ti_platform.c: revision 1.8
	sys/arch/arm/ti/am3_prcm.c: revision 1.2
	sys/arch/arm/ti/ti_platform.c: revision 1.9
	sys/arch/arm/ti/am3_prcm.c: revision 1.3
	sys/arch/arm/ti/am3_prcm.c: revision 1.4
	sys/arch/arm/ti/am3_prcm.c: revision 1.5
	sys/arch/arm/ti/am3_prcm.c: revision 1.6
	sys/arch/arm/ti/am3_prcm.c: revision 1.7
	sys/arch/evbarm/conf/DEVKIT8000: file removal
	sys/arch/arm/ti/am3_prcm.c: revision 1.8
	sys/arch/arm/ti/am3_prcm.c: revision 1.9
	sys/dev/fdt/syscon.c: revision 1.4
	sys/arch/arm/ti/files.ti: revision 1.10
	sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
	sys/arch/arm/ti/ti_sdhc.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.11
	sys/arch/arm/ti/if_cpswreg.h: revision 1.1
	sys/arch/arm/ti/ti_sdhc.c: revision 1.2
	sys/arch/arm/ti/files.ti: revision 1.12
	sys/arch/arm/ti/ti_sdhc.c: revision 1.3
	sys/arch/arm/ti/files.ti: revision 1.13
	sys/arch/arm/ti/files.ti: revision 1.14
	sys/arch/arm/ti/files.ti: revision 1.15
	sys/arch/arm/ti/files.ti: revision 1.16
	sys/arch/arm/ti/omap3_cm.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.17
	sys/arch/arm/ti/omap3_cm.c: revision 1.2
	sys/arch/arm/ti/files.ti: revision 1.18
	sys/arch/arm/ti/omap3_cm.c: revision 1.3
	sys/arch/arm/ti/files.ti: revision 1.19
	sys/arch/arm/ti/omap3_cm.c: revision 1.4
	sys/arch/arm/ti/ti_motg.c: revision 1.1
	sys/arch/arm/ti/ti_rngreg.h: revision 1.1
	sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
	sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
	sys/arch/arm/ti/am3_platform.c: revision 1.1
	sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
	sys/arch/arm/ti/ti_lcdc.h: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
	sys/arch/evbarm/conf/README.evbarm: revision 1.22
	sys/arch/evbarm/conf/README.evbarm: revision 1.23
	sys/arch/arm/ti/ti_platform.c: file removal
	sys/arch/evbarm/conf/README.evbarm: revision 1.24
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
	sys/arch/arm/ti/ti_prcm.c: revision 1.2
	sys/arch/evbarm/conf/README.evbarm: revision 1.25
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
	sys/arch/arm/ti/ti_prcm.c: revision 1.3
	sys/arch/evbarm/conf/README.evbarm: revision 1.26
	sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
	sys/arch/evbarm/conf/README.evbarm: revision 1.27
	sys/arch/arm/ti/ti_ehci.c: revision 1.1
	sys/arch/arm/ti/files.ti: revision 1.20
	sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
	sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
	sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
	sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
	sys/arch/evbarm/conf/OVERO: revision 1.56
	sys/arch/evbarm/conf/TI: file removal
	sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
	sys/dev/fdt/fdtvar.h: revision 1.55
	sys/dev/fdt/fdtvar.h: revision 1.56
	distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
	sys/dev/fdt/fdt_phy.c: revision 1.6
	sys/arch/arm/ti/ti_iicreg.h: revision 1.1
	sys/arch/arm/ti/ti_lcdc.c: revision 1.1
	sys/arch/arm/ti/ti_gpio.c: revision 1.1
	sys/arch/arm/ti/ti_iicreg.h: revision 1.2
	sys/arch/arm/ti/ti_lcdc.c: revision 1.2
	sys/dev/fdt/files.fdt: revision 1.46
	sys/arch/arm/ti/ti_gpio.c: revision 1.2
	sys/arch/arm/ti/ti_iicreg.h: revision 1.3
	sys/arch/arm/ti/ti_lcdc.c: revision 1.3
	sys/dev/fdt/files.fdt: revision 1.47
	sys/arch/arm/ti/ti_gpio.c: revision 1.3
	sys/dev/fdt/pinctrl_single.c: revision 1.1
	sys/arch/evbarm/conf/files.generic: revision 1.9
	sys/arch/arm/ti/ti_gpmc.c: revision 1.1
	sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
	sys/arch/evbarm/conf/BEAGLEBOARD: file removal
	sys/arch/arm/ti/omap3_prm.c: revision 1.1
	sys/arch/arm/ti/ti_platform.h: file removal
	sys/arch/arm/ti/omap3_platform.c: revision 1.1
	sys/arch/arm/ti/ti_prcm.h: revision 1.2
	sys/arch/arm/ti/omap3_platform.c: revision 1.2
	sys/arch/arm/ti/ti_prcm.h: revision 1.3
	sys/arch/arm/ti/ti_prcm.h: revision 1.4
	sys/dev/fdt/fdt_clock.c: revision 1.9
	sys/arch/arm/ti/ti_edma.c: revision 1.1
	sys/arch/arm/ti/ti_otg.c: revision 1.1
	distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
	sys/arch/arm/ti/if_cpsw.c: revision 1.7
	sys/arch/evbarm/conf/std.igepv2: file removal
	sys/arch/arm/ti/if_cpsw.c: revision 1.8
	sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1

Adapt ti fdt glue to support GENERIC kernel.

Do not search 64-bit directories for dts files

Fix am33xx_platform_early_putchar for pre-MMU output

Add bus driver for TI sysc interconncet.

Make com work again

Add EDMA TPCC and TPTC drivers.

Add driver for one-register-per-pin type pinctrl devices.

Add MMCHS support.

Add USB support.

Disable autoidle

Place devmap above KERNEL_IO_VBASE

Use Timer2 for timecounter, and enable hw module.

Add support for TI AM335x

Add atmel,24c256 compat data

Add I2C support.

Add tiiic, tps65217pmic

Add FDT support

Fix early putchar, add reset func

No support for tegra210 in armv7 kernel

Switch to GENERIC kernels only.

Get mac address from DT

Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.

enumerate devices under child "clocks" node

Add support for platform specific opp table filters.

Add fdtbus_clock_count to count the number of clock references on a given node

enumerate devices under child "clocks" node

Add AM335x DVFS support.

Enable TI AM335x DVFS support

Add support for GPIO controller.

Add tigpio

Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).

Add support for hardware RNG.

Add tirng

Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty

Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c

Set stdout-path on TI OMAP3 BeagleBoard

Add support for TI OMAP3.

Add OMAP3 support.

Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.

Skip xref if it is 0

Add generic USB PHY driver

Add driver for TI TWL4030 Power Management IC

Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.

Add OMAP3 USB support.

Add twl, usbnopphy, tiusb, tiusbtll

Move omap3 dtb files to /boot/dtb

Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)

Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.

Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required

Set the stdout-path on xM like Ti OMAP3 BeagleBoard

Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)

Handle different register layout on OMAP3

Add omapfb to FDT-ized TI port.

Use dss as console on Nokia N900.

Enable IRQ status bits for omap3 type and set speed properly

Add RTC support

Remove tps65950pm (hardware now supported by twl4030.c)

Add NAND flash support.

Add tigpmc, omapnand

Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)

Fix non-FDT build

Cleanup and remove dependency on arch/arm/omap

Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties

Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.

Remove commented out IGEPV2 entry

OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.

No longer used.

Also match ti,omap2-onenand

Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context

Add driver for NXP TDA19988 HDMI encoder

Add support for AM335x display controller (LCDC).

Add tdahdmi, tilcdc, tifb

Test DRM_MODE_* flags, not VID_*

Comment out mode fixup (not needed it seems)

Use 297MHz for display clock

Select closest rate to desired pixel clock

Speed up mode setting a bit and turn off the display while changing modes

Revision 1.39 / (download) - annotate - [select for diffs], Wed Oct 30 21:43:42 2019 UTC (4 years, 3 months ago) by jmcneill
Branch: MAIN
CVS Tags: phil-wifi-20191119
Changes since 1.38: +2 -2 lines
Diff to previous 1.38 (colored)

Move omap3 dtb files to /boot/dtb

Revision 1.38 / (download) - annotate - [select for diffs], Wed Oct 30 14:34:30 2019 UTC (4 years, 3 months ago) by martin
Branch: MAIN
Changes since 1.37: +2 -2 lines
Diff to previous 1.37 (colored)

Remove debug output, fix a progress message

Revision 1.37 / (download) - annotate - [select for diffs], Wed Oct 30 12:28:32 2019 UTC (4 years, 3 months ago) by martin
Branch: MAIN
Changes since 1.36: +15 -5 lines
Diff to previous 1.36 (colored)

Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.

Revision 1.36 / (download) - annotate - [select for diffs], Sun Oct 27 21:38:58 2019 UTC (4 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.35: +2 -25 lines
Diff to previous 1.35 (colored)

Switch to GENERIC kernels only.

Revision 1.35 / (download) - annotate - [select for diffs], Sun Jul 21 16:05:24 2019 UTC (4 years, 7 months ago) by rin
Branch: MAIN
CVS Tags: netbsd-9-base
Branch point for: netbsd-9
Changes since 1.34: +7 -3 lines
Diff to previous 1.34 (colored)

Fallback to non-EFI boot script if EFI bootloader is absent.

Note that we do not currently build EFI bootloader for earmv7hf-eb,
as it requires little-endian version of toolchain.

Revision 1.23.4.1 / (download) - annotate - [select for diffs], Mon Jun 10 21:42:37 2019 UTC (4 years, 8 months ago) by christos
Branch: phil-wifi
Changes since 1.23: +37 -22 lines
Diff to previous 1.23 (colored)

Sync with HEAD

Revision 1.34 / (download) - annotate - [select for diffs], Sat May 18 07:33:10 2019 UTC (4 years, 9 months ago) by skrll
Branch: MAIN
CVS Tags: phil-wifi-20190609
Changes since 1.33: +9 -8 lines
Diff to previous 1.33 (colored)

Switch the kernel7.img RaspberryPi kernel in the armv7 image to GENERIC
and thus reducing the number of kernels built in an evbarmv7 release.

Revision 1.33 / (download) - annotate - [select for diffs], Sat Apr 13 10:58:11 2019 UTC (4 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.32: +2 -4 lines
Diff to previous 1.32 (colored)

Remove sun50i support from 32-bit GENERIC.

Revision 1.32 / (download) - annotate - [select for diffs], Sat Mar 30 13:43:52 2019 UTC (4 years, 11 months ago) by jmcneill
Branch: MAIN
Changes since 1.31: +6 -1 lines
Diff to previous 1.31 (colored)

Install GENERIC ELF kernel as /netbsd for EFI booting

Revision 1.31 / (download) - annotate - [select for diffs], Sat Mar 30 13:07:57 2019 UTC (4 years, 11 months ago) by jmcneill
Branch: MAIN
Changes since 1.30: +7 -1 lines
Diff to previous 1.30 (colored)

Install bootarm.efi to boot partition

Revision 1.23.2.3 / (download) - annotate - [select for diffs], Sat Jan 26 21:58:14 2019 UTC (5 years, 1 month ago) by pgoyette
Branch: pgoyette-compat
CVS Tags: pgoyette-compat-merge-20190127
Changes since 1.23.2.2: +5 -6 lines
Diff to previous 1.23.2.2 (colored) to branchpoint 1.23 (colored) next main 1.24 (colored)

Sync with HEAD

Revision 1.30 / (download) - annotate - [select for diffs], Mon Jan 21 16:28:39 2019 UTC (5 years, 1 month ago) by jmcneill
Branch: MAIN
CVS Tags: pgoyette-compat-20190127
Changes since 1.29: +2 -2 lines
Diff to previous 1.29 (colored)

No need to specify root and console bootargs on amlogic

Revision 1.29 / (download) - annotate - [select for diffs], Sun Jan 20 10:18:03 2019 UTC (5 years, 1 month ago) by skrll
Branch: MAIN
Changes since 1.28: +4 -5 lines
Diff to previous 1.28 (colored)

Another kernel bites te dust.

Remove ODROID-C1 as it is now replaced by GENERIC. Thanks jmcneill.

Revision 1.23.2.2 / (download) - annotate - [select for diffs], Wed Dec 26 14:01:13 2018 UTC (5 years, 2 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.23.2.1: +2 -2 lines
Diff to previous 1.23.2.1 (colored) to branchpoint 1.23 (colored)

Sync with HEAD, resolve a few conflicts

Revision 1.28 / (download) - annotate - [select for diffs], Fri Nov 30 20:53:02 2018 UTC (5 years, 2 months ago) by jmcneill
Branch: MAIN
CVS Tags: pgoyette-compat-20190118, pgoyette-compat-1226
Changes since 1.27: +2 -2 lines
Diff to previous 1.27 (colored)

Add support for configuring Amazon.com EC2 SSH keys and hostnames. While
here, only set wscons=YES if a wsdisplay0 device is present.

Revision 1.23.2.1 / (download) - annotate - [select for diffs], Mon Nov 26 01:49:58 2018 UTC (5 years, 3 months ago) by pgoyette
Branch: pgoyette-compat
Changes since 1.23: +16 -10 lines
Diff to previous 1.23 (colored)

Sync with HEAD, resolve a couple of conflicts

Revision 1.27 / (download) - annotate - [select for diffs], Thu Nov 22 21:11:37 2018 UTC (5 years, 3 months ago) by aymeric
Branch: MAIN
CVS Tags: pgoyette-compat-1126
Changes since 1.26: +7 -2 lines
Diff to previous 1.26 (colored)

Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.

Revision 1.26 / (download) - annotate - [select for diffs], Thu Nov 1 11:05:24 2018 UTC (5 years, 3 months ago) by skrll
Branch: MAIN
Changes since 1.25: +7 -6 lines
Diff to previous 1.25 (colored)

Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.

While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img

Revision 1.25 / (download) - annotate - [select for diffs], Sat Oct 20 08:26:10 2018 UTC (5 years, 4 months ago) by skrll
Branch: MAIN
Changes since 1.24: +2 -2 lines
Diff to previous 1.24 (colored)

Whitespace

Revision 1.24 / (download) - annotate - [select for diffs], Sat Oct 20 08:24:11 2018 UTC (5 years, 4 months ago) by skrll
Branch: MAIN
Changes since 1.23: +5 -5 lines
Diff to previous 1.23 (colored)

a bit of sorting

Revision 1.23 / (download) - annotate - [select for diffs], Mon Dec 11 11:38:14 2017 UTC (6 years, 2 months ago) by jmcneill
Branch: MAIN
CVS Tags: phil-wifi-base, pgoyette-compat-base, pgoyette-compat-1020, pgoyette-compat-0930, pgoyette-compat-0906, pgoyette-compat-0728, pgoyette-compat-0625, pgoyette-compat-0521, pgoyette-compat-0502, pgoyette-compat-0422, pgoyette-compat-0415, pgoyette-compat-0407, pgoyette-compat-0330, pgoyette-compat-0322, pgoyette-compat-0315
Branch point for: phil-wifi, pgoyette-compat
Changes since 1.22: +7 -7 lines
Diff to previous 1.22 (colored)

Add missing RPI FDT build goop, from nick.

Revision 1.22 / (download) - annotate - [select for diffs], Sun Dec 3 13:31:45 2017 UTC (6 years, 2 months ago) by jmcneill
Branch: MAIN
Changes since 1.21: +4 -2 lines
Diff to previous 1.21 (colored)

On 64-bit boards, U-Boot expects to find .dtb files in an allwinner/ subdirectory

Revision 1.21 / (download) - annotate - [select for diffs], Thu Nov 30 19:55:47 2017 UTC (6 years, 2 months ago) by jmcneill
Branch: MAIN
Changes since 1.20: +2 -8 lines
Diff to previous 1.20 (colored)

Remove legacy awin kernels from image

Revision 1.20 / (download) - annotate - [select for diffs], Tue Nov 28 02:56:44 2017 UTC (6 years, 3 months ago) by kre
Branch: MAIN
Changes since 1.19: +3 -2 lines
Diff to previous 1.19 (colored)


Be more precise about exactly what fails when something does.

Relying upon set -e to abort things is sort of OK (it is not
a recommended option to use in general - too many odd special cases),
but only if user can work out from the "build failed" what actually
went wrong.

Tested only on amd64 build (for this, i386 is the same) - if anyone
has problems on builds for other systems, please let me know.  However
the changes affect only failure paths, the most likely problem would
be for a build to fail to halt on an error, and I hope I have avoided
that.  There should be no difference at all to error-free builds.

Revision 1.19 / (download) - annotate - [select for diffs], Thu Nov 9 21:36:46 2017 UTC (6 years, 3 months ago) by skrll
Branch: MAIN
Changes since 1.18: +2 -2 lines
Diff to previous 1.18 (colored)

Trailing whitespace

Revision 1.18 / (download) - annotate - [select for diffs], Sun Oct 8 00:15:13 2017 UTC (6 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.17: +2 -10 lines
Diff to previous 1.17 (colored)

Don't install uEnv.txt for beagle; boot.scr handles this now.

Revision 1.17 / (download) - annotate - [select for diffs], Sat Oct 7 23:40:00 2017 UTC (6 years, 4 months ago) by jmcneill
Branch: MAIN
Changes since 1.16: +12 -17 lines
Diff to previous 1.16 (colored)

Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.

Revision 1.16 / (download) - annotate - [select for diffs], Mon Jul 31 16:34:22 2017 UTC (6 years, 6 months ago) by jmcneill
Branch: MAIN
Changes since 1.15: +7 -1 lines
Diff to previous 1.15 (colored)

Create a config.txt for RPI and set 'enable_uart=1' and 'force_turbo=0'.
This config gives us a stable core_freq clock that is used to drive the
SD HOST and AUX UART devices.

More information on config.txt settings for the UART can be found here:

https://www.raspberrypi.org/documentation/configuration/uart.md

Revision 1.12.4.1 / (download) - annotate - [select for diffs], Tue Jul 18 19:13:07 2017 UTC (6 years, 7 months ago) by snj
Branch: netbsd-8
CVS Tags: netbsd-8-2-RELEASE, netbsd-8-1-RELEASE, netbsd-8-1-RC1, netbsd-8-0-RELEASE, netbsd-8-0-RC2, netbsd-8-0-RC1, matt-nb8-mediatek-base, matt-nb8-mediatek
Changes since 1.12: +19 -3 lines
Diff to previous 1.12 (colored) next main 1.13 (colored)

Pull up following revision(s) (requested by jmcneill in ticket #114):
	sys/arch/arm/samsung/exynos_intr.h: revision 1.3
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
	distrib/utils/embedded/mkimage: revision 1.66
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
	sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
	sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
	sys/dev/gpio/gpio.c: revision 1.59
	sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
	sys/conf/Makefile.kern.inc: revision 1.257
	sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
	sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
	sys/conf/Makefile.kern.inc: revision 1.258
	sys/arch/arm/fdt/psci_fdt.h: revision 1.1
	sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
	sys/arch/evbarm/conf/files.sunxi: revision 1.1
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
	sys/arch/arm/samsung/files.exynos: revision 1.22
	distrib/utils/embedded/conf/armv7.conf: revision 1.13
	sys/arch/arm/samsung/files.exynos: revision 1.23
	sys/arch/evbarm/conf/std.tegra: revision 1.15
	distrib/utils/embedded/conf/armv7.conf: revision 1.14
	sys/arch/arm/samsung/files.exynos: revision 1.24
	distrib/utils/embedded/conf/armv7.conf: revision 1.15
	sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
	sys/arch/arm/samsung/exynos_fdt.c: file removal
	sys/dev/fdt/fdt_pinctrl.c: revision 1.4
	sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
	sys/dev/usb/ehci.c: revision 1.255
	sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
	sys/dev/ic/dwc_mmc.c: revision 1.11
	sys/arch/arm/cortex/gic.c: revision 1.24
	distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
	etc/etc.evbarm/Makefile.inc: revision 1.87
	etc/etc.evbarm/Makefile.inc: revision 1.88
	sys/arch/arm/fdt/gic_fdt.c: revision 1.5
	etc/Makefile: revision 1.429
	sys/arch/arm/fdt/gic_fdt.c: revision 1.6
	sys/arch/arm/fdt/gic_fdt.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
	sys/arch/evbarm/conf/std.sunxi: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
	sys/arch/evbarm/conf/std.sunxi: revision 1.2
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
	sys/arch/evbarm/conf/std.sunxi: revision 1.3
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
	sys/dev/gpio/gpiovar.h: revision 1.17
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
	sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
	sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
	sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
	sys/dev/fdt/fdtvar.h: revision 1.21
	sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
	sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
	sys/dev/fdt/fdtvar.h: revision 1.22
	sys/arch/evbarm/conf/SUNXI: revision 1.10
	sys/dev/fdt/fdtvar.h: revision 1.23
	sys/arch/evbarm/conf/SUNXI: revision 1.11
	sys/dev/fdt/gpioleds.c: revision 1.1
	sys/dev/fdt/fdtvar.h: revision 1.24
	sys/arch/evbarm/conf/SUNXI: revision 1.12
	sys/arch/evbarm/conf/SUNXI: revision 1.13
	sys/arch/arm/cortex/gic.c: revision 1.30
	sys/arch/evbarm/conf/SUNXI: revision 1.14
	sys/arch/evbarm/conf/SUNXI: revision 1.15
	sys/arch/evbarm/conf/SUNXI: revision 1.16
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
	etc/Makefile: revision 1.430
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
	etc/Makefile: revision 1.431
	sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
	sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
	sys/arch/arm/samsung/exynos_platform.c: revision 1.1
	sys/dev/ofw/ofw_subr.c: revision 1.29
	sys/arch/arm/samsung/exynos_platform.c: revision 1.2
	sys/arch/evbarm/conf/mk.vexpress: revision 1.3
	sys/arch/arm/samsung/exynos_platform.c: revision 1.3
	sys/arch/evbarm/conf/mk.vexpress: revision 1.4
	sys/arch/arm/samsung/exynos_platform.c: revision 1.4
	sys/arch/arm/arm/psci.h: revision 1.1
	sys/arch/arm/samsung/exynos_platform.c: revision 1.5
	sys/arch/arm/samsung/exynos_platform.c: revision 1.6
	sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
	external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
	sys/dev/fdt/files.fdt: revision 1.17
	sys/dev/fdt/files.fdt: revision 1.18
	sys/dev/fdt/files.fdt: revision 1.19
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
	sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
	sys/arch/arm/conf/files.arm: revision 1.133
	sys/arch/arm/samsung/mct_var.h: revision 1.5
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
	sys/arch/evbarm/conf/std.vexpress: revision 1.6
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
	sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
	sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
	sys/arch/arm/sunxi/files.sunxi: revision 1.1
	sys/dev/ofw/ofw_subr.c: revision 1.30
	sys/arch/arm/sunxi/files.sunxi: revision 1.2
	sys/dev/ofw/openfirm.h: revision 1.35
	sys/arch/arm/sunxi/files.sunxi: revision 1.3
	sys/dev/ofw/openfirm.h: revision 1.36
	sys/arch/arm/sunxi/files.sunxi: revision 1.4
	sys/arch/arm/sunxi/files.sunxi: revision 1.5
	sys/arch/evbarm/exynos/exynos_machdep.c: file removal
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
	sys/arch/arm/samsung/sscom.c: revision 1.9
	sys/arch/arm/sunxi/files.sunxi: revision 1.6
	sys/dev/fdt/ohci_fdt.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
	sys/arch/arm/sunxi/files.sunxi: revision 1.7
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
	sys/arch/arm/sunxi/files.sunxi: revision 1.8
	sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
	sys/arch/arm/sunxi/files.sunxi: revision 1.9
	sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
	sys/arch/evbarm/conf/mk.tegra: revision 1.5
	sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
	sys/arch/evbarm/conf/mk.tegra: revision 1.6
	sys/arch/evbarm/conf/EXYNOS: revision 1.15
	sys/arch/evbarm/conf/EXYNOS: revision 1.16
	sys/arch/evbarm/conf/EXYNOS: revision 1.17
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
	sys/arch/evbarm/conf/EXYNOS: revision 1.19
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
	sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
	sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
	sys/arch/evbarm/conf/mk.sunxi: revision 1.1
	sys/arch/evbarm/include/bootconfig.h: revision 1.7
	sys/arch/evbarm/conf/TEGRA: revision 1.24
	sys/arch/arm/arm/psci.c: revision 1.1
	sys/dev/led.c: revision 1.1
	sys/dev/led.c: revision 1.2
	sys/arch/arm/arm/psci_arm.S: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
	sys/dev/fdt/ehci_fdt.c: revision 1.1
	sys/dev/fdt/ehci_fdt.c: revision 1.2
	sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
	sys/arch/evbarm/conf/EXYNOS: revision 1.21
	sys/arch/arm/sunxi/files.sunxi: revision 1.10
	sys/arch/arm/sunxi/files.sunxi: revision 1.11
	sys/dev/fdt/fdtbus.c: revision 1.14
	sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
	sys/arch/arm/samsung/exynos5422_dma.c: file removal
	usr.bin/config/mkmakefile.c: revision 1.69
	sys/conf/files: revision 1.1178
	sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
	sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
	sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
	sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
	sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
	sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
	sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
	sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
	sys/arch/evbarm/conf/SUNXI: revision 1.1
	external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
	sys/arch/evbarm/conf/SUNXI: revision 1.2
	sys/arch/arm/fdt/psci_fdt.c: revision 1.1
	sys/arch/evbarm/conf/SUNXI: revision 1.3
	sys/arch/evbarm/conf/SUNXI: revision 1.4
	sys/arch/evbarm/conf/files.exynos: revision 1.3
	sys/arch/evbarm/conf/SUNXI: revision 1.5
	sys/arch/evbarm/conf/SUNXI: revision 1.6
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
	sys/dev/fdt/fixedfactorclock.c: revision 1.1
	sys/dev/fdt/fdt_subr.c: revision 1.14
	sys/arch/evbarm/conf/SUNXI: revision 1.7
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
	sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
	sys/dev/fdt/fdt_subr.c: revision 1.15
	sys/arch/evbarm/conf/SUNXI: revision 1.8
	sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
	sys/dev/ic/dwc_mmc_reg.h: revision 1.6
	sys/dev/fdt/fdt_subr.c: revision 1.16
	sys/arch/evbarm/conf/SUNXI: revision 1.9
	usr.bin/config/mkmakefile.c: revision 1.70
	sys/dev/fdt/fdt_phy.c: revision 1.1
	sys/arch/evbarm/conf/ODROID-XU: file removal
	sys/arch/arm/fdt/arm_fdt.c: revision 1.4
	sys/arch/arm/samsung/exynos_reg.h: revision 1.14
	sys/conf/files: revision 1.1180
	sys/arch/arm/samsung/exynos_reg.h: revision 1.15
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
	sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
	sys/dev/ic/dwc_mmc_var.h: revision 1.6
	sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
	sys/arch/evbarm/exynos/platform.h: revision 1.2
	sys/arch/arm/fdt/files.fdt: revision 1.12
	sys/arch/evbarm/conf/std.exynos: revision 1.2
	sys/arch/evbarm/conf/std.exynos: revision 1.3
	sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
	sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
	sys/dev/led.h: revision 1.1
	sys/arch/evbarm/conf/std.exynos: revision 1.5
	sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
	sys/arch/evbarm/conf/files.evbarm: revision 1.26
	usr.bin/config/defs.h: revision 1.99
	sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
	sys/arch/arm/samsung/exynos_soc.c: revision 1.32
	sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
	sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
	sys/arch/arm/samsung/mct.c: revision 1.11
	sys/arch/evbarm/conf/ODROID-U: file removal
	sys/arch/arm/samsung/mct.c: revision 1.12
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
	sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too.  ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.

Revision 1.15 / (download) - annotate - [select for diffs], Sun Jul 9 10:41:40 2017 UTC (6 years, 7 months ago) by jmcneill
Branch: MAIN
CVS Tags: perseant-stdc-iso10646-base, perseant-stdc-iso10646
Changes since 1.14: +2 -1 lines
Diff to previous 1.14 (colored)

Add : to body of populate_sunxi to appease bash.

Revision 1.14 / (download) - annotate - [select for diffs], Thu Jul 6 21:07:09 2017 UTC (6 years, 7 months ago) by jmcneill
Branch: MAIN
Changes since 1.13: +4 -2 lines
Diff to previous 1.13 (colored)

Test for kernel build directory before reading DTB list

Revision 1.13 / (download) - annotate - [select for diffs], Thu Jul 6 00:17:04 2017 UTC (6 years, 7 months ago) by jmcneill
Branch: MAIN
Changes since 1.12: +16 -3 lines
Diff to previous 1.12 (colored)

Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.

Revision 1.10.2.1 / (download) - annotate - [select for diffs], Wed Apr 26 02:52:17 2017 UTC (6 years, 10 months ago) by pgoyette
Branch: pgoyette-localcount
Changes since 1.10: +6 -5 lines
Diff to previous 1.10 (colored) next main 1.11 (colored)

Sync with HEAD

Revision 1.10.4.1 / (download) - annotate - [select for diffs], Fri Apr 21 16:51:15 2017 UTC (6 years, 10 months ago) by bouyer
Branch: bouyer-socketcan
Changes since 1.10: +6 -5 lines
Diff to previous 1.10 (colored) next main 1.11 (colored)

Sync with HEAD

Revision 1.12 / (download) - annotate - [select for diffs], Wed Apr 12 23:35:29 2017 UTC (6 years, 10 months ago) by jmcneill
Branch: MAIN
CVS Tags: prg-localcount2-base3, prg-localcount2-base2, prg-localcount2-base1, prg-localcount2-base, prg-localcount2, pgoyette-localcount-20170426, netbsd-8-base, bouyer-socketcan-base1
Branch point for: netbsd-8
Changes since 1.11: +2 -2 lines
Diff to previous 1.11 (colored)

ODROID-C1: Now that the MBR partition table contains an entry for the BSD
partition, the disklabel no longer conflicts with the ODROID-C1 bootloader.
Root partition changes from ld0e to ld0a.

Revision 1.11 / (download) - annotate - [select for diffs], Mon Apr 10 22:25:36 2017 UTC (6 years, 10 months ago) by jmcneill
Branch: MAIN
Changes since 1.10: +5 -4 lines
Diff to previous 1.10 (colored)

tegra: set loadaddr to 0x90000000 (the default kernel_addr_r overlaps
fdt_addr_r on TK1 + L4T 21.x), and set default root device to ld0a to
match new device probe order.

Revision 1.10 / (download) - annotate - [select for diffs], Sat Dec 19 14:57:49 2015 UTC (8 years, 2 months ago) by skrll
Branch: MAIN
CVS Tags: pgoyette-localcount-base, pgoyette-localcount-20170320, pgoyette-localcount-20170107, pgoyette-localcount-20161104, pgoyette-localcount-20160806, pgoyette-localcount-20160726, localcount-20160914, bouyer-socketcan-base
Branch point for: pgoyette-localcount, bouyer-socketcan
Changes since 1.9: +18 -1 lines
Diff to previous 1.9 (colored)

C&P of change in rpi.conf (maybe factor out)

By default, RPI firmware sets the max CPU frequency to 600MHz. This can be
overridden by setting arm_freq in config.txt, but the default freq at boot
is still 600MHz.

Add logic to rc.local to compare the current vs. max CPU frequency; if they
differ, set the target frequency to the maximum.

Revision 1.9 / (download) - annotate - [select for diffs], Sun Dec 13 23:02:56 2015 UTC (8 years, 2 months ago) by jmcneill
Branch: MAIN
Changes since 1.8: +10 -8 lines
Diff to previous 1.8 (colored)

Remove JETSONTK1 and NYAN-BIG kernels, add a new unified kernel named TEGRA.

Revision 1.7.2.5 / (download) - annotate - [select for diffs], Sun Aug 30 09:56:19 2015 UTC (8 years, 6 months ago) by martin
Branch: netbsd-7
CVS Tags: netbsd-7-nhusb-base-20170116, netbsd-7-nhusb-base, netbsd-7-nhusb, netbsd-7-2-RELEASE, netbsd-7-1-RELEASE, netbsd-7-1-RC2, netbsd-7-1-RC1, netbsd-7-1-2-RELEASE, netbsd-7-1-1-RELEASE, netbsd-7-1, netbsd-7-0-RELEASE, netbsd-7-0-2-RELEASE, netbsd-7-0-1-RELEASE, netbsd-7-0
Changes since 1.7.2.4: +2 -2 lines
Diff to previous 1.7.2.4 (colored) next main 1.8 (colored)

Pull up the following revision, requested by snj in #961:

	src/distrib/utils/embedded/conf/armv7.conf	r1.6

Properly escape the $ when trying to pass the u-boot env var $kernel.
From Rin Okuyama.

Revision 1.7.2.4 / (download) - annotate - [select for diffs], Sat Aug 22 16:35:31 2015 UTC (8 years, 6 months ago) by snj
Branch: netbsd-7
Changes since 1.7.2.3: +2 -2 lines
Diff to previous 1.7.2.3 (colored)

Pull up following revision(s) (requested by jmcneill in ticket #959):
	distrib/utils/embedded/conf/armv7.conf: revision 1.8 via patch
Cubieboard2 kernel is named netbsd-CUBIEBOARD.ub not netbsd-CUBIEBOARD2.ub

Revision 1.8 / (download) - annotate - [select for diffs], Fri Aug 21 17:08:11 2015 UTC (8 years, 6 months ago) by jmcneill
Branch: MAIN
Changes since 1.7: +2 -2 lines
Diff to previous 1.7 (colored)

Cubieboard2 kernel is named netbsd-CUBIEBOARD.ub not netbsd-CUBIEBOARD2.ub

Revision 1.7.2.3 / (download) - annotate - [select for diffs], Fri Aug 7 13:44:27 2015 UTC (8 years, 6 months ago) by martin
Branch: netbsd-7
CVS Tags: netbsd-7-0-RC3
Changes since 1.7.2.2: +2 -1 lines
Diff to previous 1.7.2.2 (colored)

Pull up following revision(s) (requested by skrll in ticket #938):
	distrib/utils/embedded/conf/armv7.conf: revision 1.5
Turn resize on

Revision 1.7.2.2 / (download) - annotate - [select for diffs], Thu Aug 6 21:13:43 2015 UTC (8 years, 6 months ago) by snj
Branch: netbsd-7
Changes since 1.7.2.1: +122 -0 lines
Diff to previous 1.7.2.1 (colored)

Pull up following revision(s) (requested by skrll in ticket #909):
	distrib/sets/lists/etc/mi: revision 1.237
	distrib/sets/lists/tests/mi: revision 1.613
	distrib/utils/embedded/conf/armv7.conf: revisions 1.1, 1.2
	distrib/utils/embedded/conf/beagleboard.conf: delete
	distrib/utils/embedded/conf/evbarm.conf: revisions 1.21, 1.22
	distrib/utils/embedded/conf/rpi.conf: revisions 1.28, 1.29
	distrib/utils/embedded/conf/rpi_inst.conf: revisions 1.7, 1.8
	distrib/utils/embedded/conf/usermode.conf: revision 1.5
	distrib/utils/embedded/conf/x86.conf: revision 1.5
	distrib/utils/embedded/files/resize_disklabel: revision 1.1
	distrib/utils/embedded/mkimage: revisions 1.49, 1.55-1.59
	etc/defaults/rc.conf: revision 1.133
	etc/etc.evbarm/Makefile.inc: revisions 1.72, 1.76
	etc/rc.d/Makefile: revision 1.93 via patch
	etc/rc.d/resize_root: revisions 1.1-1.3
	etc/rc.d/root: revision 1.5
	sbin/resize_ffs/Makefile: revision 1.5
	sbin/resize_ffs/resize_ffs.8: revisions 1.14-1.16
	sbin/resize_ffs/resize_ffs.c: revisions 1.39-1.44
	share/man/man5/rc.conf.5: revision 1.158, 1.159
	tests/sbin/resize_ffs/Makefile: revision 1.4
	tests/sbin/resize_ffs/common.sh: revision 1.14
	tests/sbin/resize_ffs/t_check.sh: revision 1.1
	tests/sbin/resize_ffs/t_grow.sh: revision 1.9
	tests/sbin/resize_ffs/t_grow_swapped.sh: revision 1.3
	tests/sbin/resize_ffs/t_shrink.sh: revision 1.8
	tests/sbin/resize_ffs/t_shrink_swapped.sh: revision 1.2
fix image building:
         - round up the total size of the disk image
         - fix fdisk offset for netbsd ffs images
--
Make get_dev_size work on regular files too.
--
Use `!= -1' instead of `== 0' out of paranoia.
--
- Add -c to check to see if grow/shrink is required
- Divide by DEV_BSIZE when returning size of file.
- Update manpage
--
New sentence, new line. Sort option descriptions.
--
Add resize_root boot operation. If resize_root=YES in rc.conf then
the system attempts to resize the root file system to fill it's
partition prior to mounting read-write. Useful for things like AMI
file system images. May eventually be used by arm images after
coming up with similar solution for increasing the parition size.
--
- Add new tests for -c check flag in resize_ffs
--
Bump date for previous.
it's -> its
--
Handle case in grow() where last cylinder group is too small for ufs2.
Align with code in shrink().
--
factor out geometry calculation and use this also in CheckOnly mode.
be a bit more verbose in Verbose mode.
--
Add support for auto-growing the root partition. Enable it for rpi.img.
--
initialize resize before pulling in board config
--
add KEYWORD: interactive, honour resize_root_flags and
resize_root_postcmd rc vars
--
if the -p flag is specified, display a progress bar while growing the
file-system
--
show resize_ffs progress bar when resizing root partition
--
fix typo in previous; pass -y unconditionally to resize_ffs, not -p
--
Rename beagleboard.img to armv7.img. The new image includes the same
kernels as beagleboard.img plus support for Raspberry Pi 2, ODROID-C1,
Cubieboard2, Cubietruck, Hummingbird A31, and Banana Pi.
--
Properly spell X' name. From X(7):
        The  X.Org  Foundation  requests  that the following names be
used when
        referring to this software:
                                           X
                                    X Window System
                                     X Version 11
                              X Window System, Version 11
                                          X11
--
Add some documentation:
Tell what this does, and what it expects from conf files
--
Cleanup: make_filesystems is not used any longer, purge remains
--
More cleanup:
Instead of first overwriting the *_evbarm functions with own code,
and then calling them from the regular functions, directly put the
code into the regular functions.
No more functions from evbarm.conf are used now.
Some variables are still used!
--
define TOOL_MKUBOOTIMAGE for mkimage
--
fix mkubootimage

Revision 1.7.2.1, Sun Aug 2 11:11:32 2015 UTC (8 years, 6 months ago) by snj
Branch: netbsd-7
Changes since 1.7: +0 -137 lines
FILE REMOVED

file armv7.conf was added on branch netbsd-7 on 2015-08-06 21:13:43 +0000

Revision 1.7 / (download) - annotate - [select for diffs], Sun Aug 2 11:11:32 2015 UTC (8 years, 6 months ago) by jmcneill
Branch: MAIN
Branch point for: netbsd-7
Changes since 1.6: +2 -2 lines
Diff to previous 1.6 (colored)

install jetsontk1 boot script as boot.scr

Revision 1.6 / (download) - annotate - [select for diffs], Wed Jul 15 11:29:16 2015 UTC (8 years, 7 months ago) by martin
Branch: MAIN
Changes since 1.5: +2 -2 lines
Diff to previous 1.5 (colored)

Properly escape the $ when trying to pass the u-boot env var $kernel.
From Rin Okuyama.

Revision 1.5 / (download) - annotate - [select for diffs], Wed Jul 8 10:57:46 2015 UTC (8 years, 7 months ago) by skrll
Branch: MAIN
Changes since 1.4: +2 -1 lines
Diff to previous 1.4 (colored)

Turn resize on

Revision 1.4 / (download) - annotate - [select for diffs], Sun May 24 17:11:18 2015 UTC (8 years, 9 months ago) by christos
Branch: MAIN
Changes since 1.3: +11 -11 lines
Diff to previous 1.3 (colored)

double quote police

Revision 1.3 / (download) - annotate - [select for diffs], Fri May 22 01:18:22 2015 UTC (8 years, 9 months ago) by jmcneill
Branch: MAIN
Changes since 1.2: +16 -2 lines
Diff to previous 1.2 (colored)

add JETSONTK1 to armv7.img

Revision 1.2 / (download) - annotate - [select for diffs], Sun Apr 19 18:28:31 2015 UTC (8 years, 10 months ago) by hubertf
Branch: MAIN
Changes since 1.1: +1 -5 lines
Diff to previous 1.1 (colored)

Cleanup: make_filesystems is not used any longer, purge remains

Revision 1.1 / (download) - annotate - [select for diffs], Thu Apr 9 10:55:23 2015 UTC (8 years, 10 months ago) by jmcneill
Branch: MAIN

Rename beagleboard.img to armv7.img. The new image includes the same
kernels as beagleboard.img plus support for Raspberry Pi 2, ODROID-C1,
Cubieboard2, Cubietruck, Hummingbird A31, and Banana Pi.

This form allows you to request diff's between any two revisions of a file. You may select a symbolic revision name using the selection box or you may type in a numeric name using the type-in text box.




CVSweb <webmaster@jp.NetBSD.org>