![[BACK]](/icons/back.gif){kind=icon}
Up to [cvs.NetBSD.org] / src / crypto / external / bsd / openssh / dist
Request diff between arbitrary revisions
Keyword substitution: kv
Default branch: MAIN
Pull up the following, requested by kim in ticket #1780: crypto/external/bsd/openssh/Makefile.inc up to 1.15 (+patch) crypto/external/bsd/openssh/bin/Makefile.inc up to 1.4 crypto/external/bsd/openssh/bin/scp/Makefile up to 1.6 crypto/external/bsd/openssh/bin/sftp/Makefile up to 1.11 crypto/external/bsd/openssh/bin/sftp-server/Makefile up to 1.4 crypto/external/bsd/openssh/bin/ssh/Makefile up to 1.20 crypto/external/bsd/openssh/bin/ssh-add/Makefile up to 1.3 crypto/external/bsd/openssh/bin/ssh-agent/Makefile up to 1.7 crypto/external/bsd/openssh/bin/ssh-keygen/Makefile up to 1.10 crypto/external/bsd/openssh/bin/ssh-keyscan/Makefile up to 1.6 crypto/external/bsd/openssh/bin/ssh-pkcs11-helper/Makefile up to 1.4 crypto/external/bsd/openssh/bin/sshd/Makefile up to 1.27 (+patch) crypto/external/bsd/openssh/dist/PROTOCOL.sshsig up to 1.1.1.2 crypto/external/bsd/openssh/dist/srclimit.c up to 1.3 crypto/external/bsd/openssh/dist/sftp-realpath.c up to 1.3 crypto/external/bsd/openssh/dist/sntrup761.c up to 1.3 crypto/external/bsd/openssh/dist/sntrup761.sh up to 1.1.1.2 crypto/external/bsd/openssh/dist/sshsig.c up to 1.12 crypto/external/bsd/openssh/dist/sshsig.h up to 1.1.1.5 crypto/external/bsd/openssh/dist/addr.c up to 1.6 crypto/external/bsd/openssh/dist/PROTOCOL.u2f up to 1.1.1.3 crypto/external/bsd/openssh/dist/sk-api.h up to 1.1.1.6 crypto/external/bsd/openssh/dist/sk-usbhid.c up to 1.9 crypto/external/bsd/openssh/dist/ssh-ecdsa-sk.c up to 1.4 crypto/external/bsd/openssh/dist/ssh-ed25519-sk.c up to 1.5 crypto/external/bsd/openssh/dist/ssh-sk-client.c up to 1.6 crypto/external/bsd/openssh/dist/ssh-sk-helper.8 up to 1.1.1.2 crypto/external/bsd/openssh/dist/ssh-sk-helper.c up to 1.7 crypto/external/bsd/openssh/dist/ssh-sk.c up to 1.8 crypto/external/bsd/openssh/dist/ssh-sk.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/sshbuf-io.c up to 1.2 crypto/external/bsd/openssh/dist/addr.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/kexsntrup761x25519.c up to 1.3 crypto/external/bsd/openssh/dist/cipher-chachapoly-libcrypto.c up to 1.3 crypto/external/bsd/openssh/dist/srclimit.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/auth2-pubkeyfile.c up to 1.3 crypto/external/bsd/openssh/dist/sftp-usergroup.c up to 1.3 crypto/external/bsd/openssh/dist/sftp-usergroup.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/ed25519.sh up to 1.1.1.1 crypto/external/bsd/openssh/dist/crc32.c delete crypto/external/bsd/openssh/dist/crc32.h delete crypto/external/bsd/openssh/dist/fe25519.c delete crypto/external/bsd/openssh/dist/fe25519.h delete crypto/external/bsd/openssh/dist/ge25519.c delete crypto/external/bsd/openssh/dist/ge25519.h delete crypto/external/bsd/openssh/dist/ge25519_base.data delete crypto/external/bsd/openssh/dist/kexsntrup4591761x25519.c delete crypto/external/bsd/openssh/dist/sc25519.c delete crypto/external/bsd/openssh/dist/sc25519.h delete crypto/external/bsd/openssh/dist/sntrup4591761.c delete crypto/external/bsd/openssh/dist/sntrup4591761.sh delete crypto/external/bsd/openssh/dist/uuencode.c delete crypto/external/bsd/openssh/dist/uuencode.h delete crypto/external/bsd/openssh/dist/verify.c delete crypto/external/bsd/openssh/dist/LICENCE up to 1.7 crypto/external/bsd/openssh/dist/PROTOCOL up to 1.23 crypto/external/bsd/openssh/dist/PROTOCOL.agent up to 1.15 crypto/external/bsd/openssh/dist/PROTOCOL.certkeys up to 1.13 crypto/external/bsd/openssh/dist/PROTOCOL.chacha20poly1305 up to 1.1.1.4 crypto/external/bsd/openssh/dist/PROTOCOL.key up to 1.1.1.3 crypto/external/bsd/openssh/dist/PROTOCOL.krl up to 1.1.1.5 crypto/external/bsd/openssh/dist/PROTOCOL.mux up to 1.12 crypto/external/bsd/openssh/dist/addrmatch.c up to 1.15 crypto/external/bsd/openssh/dist/auth-krb5.c up to 1.16 crypto/external/bsd/openssh/dist/auth-options.c up to 1.29 crypto/external/bsd/openssh/dist/auth-options.h up to 1.15 crypto/external/bsd/openssh/dist/auth-pam.c up to 1.21 crypto/external/bsd/openssh/dist/auth-passwd.c up to 1.13 crypto/external/bsd/openssh/dist/auth-rhosts.c up to 1.16 crypto/external/bsd/openssh/dist/auth.c up to 1.34 crypto/external/bsd/openssh/dist/auth.h up to 1.23 crypto/external/bsd/openssh/dist/auth2-chall.c up to 1.19 crypto/external/bsd/openssh/dist/auth2-gss.c up to 1.17 crypto/external/bsd/openssh/dist/auth2-hostbased.c up to 1.23 crypto/external/bsd/openssh/dist/auth2-kbdint.c up to 1.15 crypto/external/bsd/openssh/dist/auth2-krb5.c up to 1.10 crypto/external/bsd/openssh/dist/auth2-none.c up to 1.14 crypto/external/bsd/openssh/dist/auth2-passwd.c up to 1.16 crypto/external/bsd/openssh/dist/auth2-pubkey.c up to 1.34 crypto/external/bsd/openssh/dist/auth2.c up to 1.29 crypto/external/bsd/openssh/dist/authfd.c up to 1.27 crypto/external/bsd/openssh/dist/authfd.h up to 1.17 crypto/external/bsd/openssh/dist/authfile.c up to 1.28 crypto/external/bsd/openssh/dist/authfile.h up to 1.10 crypto/external/bsd/openssh/dist/canohost.c up to 1.16 crypto/external/bsd/openssh/dist/chacha.c up to 1.6 crypto/external/bsd/openssh/dist/chacha.h up to 1.3 crypto/external/bsd/openssh/dist/channels.c up to 1.42 crypto/external/bsd/openssh/dist/channels.h up to 1.26 crypto/external/bsd/openssh/dist/cipher-chachapoly.c up to 1.7 crypto/external/bsd/openssh/dist/cipher-chachapoly.h up to 1.3 crypto/external/bsd/openssh/dist/cipher.c up to 1.21 crypto/external/bsd/openssh/dist/cipher.h up to 1.17 crypto/external/bsd/openssh/dist/clientloop.c up to 1.39 crypto/external/bsd/openssh/dist/clientloop.h up to 1.18 crypto/external/bsd/openssh/dist/compat.c up to 1.26 crypto/external/bsd/openssh/dist/compat.h up to 1.18 crypto/external/bsd/openssh/dist/crypto_api.h up to 1.5 crypto/external/bsd/openssh/dist/dh.c up to 1.20 crypto/external/bsd/openssh/dist/dh.h up to 1.13 crypto/external/bsd/openssh/dist/digest-libc.c up to 1.8 crypto/external/bsd/openssh/dist/digest-openssl.c up to 1.9 crypto/external/bsd/openssh/dist/dispatch.c up to 1.11 crypto/external/bsd/openssh/dist/dns.c up to 1.23 crypto/external/bsd/openssh/dist/dns.h up to 1.13 crypto/external/bsd/openssh/dist/ed25519.c up to 1.6 crypto/external/bsd/openssh/dist/fatal.c up to 1.7 crypto/external/bsd/openssh/dist/getrrsetbyname.c up to 1.6 crypto/external/bsd/openssh/dist/gss-genr.c up to 1.11 crypto/external/bsd/openssh/dist/gss-serv.c up to 1.15 crypto/external/bsd/openssh/dist/hash.c up to 1.7 crypto/external/bsd/openssh/dist/hmac.c up to 1.8 crypto/external/bsd/openssh/dist/hostfile.c up to 1.23 crypto/external/bsd/openssh/dist/hostfile.h up to 1.11 crypto/external/bsd/openssh/dist/includes.h up to 1.9 crypto/external/bsd/openssh/dist/kex.c up to 1.34 crypto/external/bsd/openssh/dist/kex.h up to 1.24 crypto/external/bsd/openssh/dist/kexdh.c up to 1.10 crypto/external/bsd/openssh/dist/kexgen.c up to 1.7 crypto/external/bsd/openssh/dist/kexgexc.c up to 1.17 crypto/external/bsd/openssh/dist/kexgexs.c up to 1.23 crypto/external/bsd/openssh/dist/krl.c up to 1.23 crypto/external/bsd/openssh/dist/krl.h up to 1.6 crypto/external/bsd/openssh/dist/ldapauth.c up to 1.8 crypto/external/bsd/openssh/dist/ldapauth.h up to 1.6 crypto/external/bsd/openssh/dist/log.c up to 1.27 crypto/external/bsd/openssh/dist/log.h up to 1.17 crypto/external/bsd/openssh/dist/mac.c up to 1.16 crypto/external/bsd/openssh/dist/match.c up to 1.16 crypto/external/bsd/openssh/dist/match.h up to 1.11 crypto/external/bsd/openssh/dist/misc.c up to 1.35 crypto/external/bsd/openssh/dist/misc.h up to 1.27 crypto/external/bsd/openssh/dist/moduli up to 1.10 crypto/external/bsd/openssh/dist/moduli.c up to 1.17 crypto/external/bsd/openssh/dist/monitor.c up to 1.43 crypto/external/bsd/openssh/dist/monitor.h up to 1.13 crypto/external/bsd/openssh/dist/monitor_fdpass.c up to 1.9 crypto/external/bsd/openssh/dist/monitor_wrap.c up to 1.34 crypto/external/bsd/openssh/dist/monitor_wrap.h up to 1.23 crypto/external/bsd/openssh/dist/msg.c up to 1.11 crypto/external/bsd/openssh/dist/mux.c up to 1.35 crypto/external/bsd/openssh/dist/myproposal.h up to 1.24 crypto/external/bsd/openssh/dist/namespace.h up to 1.10 crypto/external/bsd/openssh/dist/nchan.c up to 1.14 crypto/external/bsd/openssh/dist/packet.c up to 1.50 crypto/external/bsd/openssh/dist/packet.h up to 1.26 crypto/external/bsd/openssh/dist/pathnames.h up to 1.15 crypto/external/bsd/openssh/dist/pfilter.c up to 1.8 (+patch) crypto/external/bsd/openssh/dist/poly1305.c up to 1.6 crypto/external/bsd/openssh/dist/progressmeter.c up to 1.15 crypto/external/bsd/openssh/dist/readconf.c up to 1.44 crypto/external/bsd/openssh/dist/readconf.h up to 1.34 crypto/external/bsd/openssh/dist/readpass.c up to 1.18 crypto/external/bsd/openssh/dist/rijndael.h up to 1.3 crypto/external/bsd/openssh/dist/sandbox-pledge.c up to 1.3 crypto/external/bsd/openssh/dist/sandbox-rlimit.c up to 1.7 crypto/external/bsd/openssh/dist/scp.1 up to 1.31 crypto/external/bsd/openssh/dist/scp.c up to 1.41 crypto/external/bsd/openssh/dist/servconf.c up to 1.44 crypto/external/bsd/openssh/dist/servconf.h up to 1.30 crypto/external/bsd/openssh/dist/serverloop.c up to 1.35 crypto/external/bsd/openssh/dist/session.c up to 1.38 crypto/external/bsd/openssh/dist/session.h up to 1.10 crypto/external/bsd/openssh/dist/sftp-client.c up to 1.35 crypto/external/bsd/openssh/dist/sftp-client.h up to 1.18 crypto/external/bsd/openssh/dist/sftp-common.c up to 1.14 crypto/external/bsd/openssh/dist/sftp-common.h up to 1.8 crypto/external/bsd/openssh/dist/sftp-glob.c up to 1.15 crypto/external/bsd/openssh/dist/sftp-server-main.c up to 1.8 crypto/external/bsd/openssh/dist/sftp-server.8 up to 1.14 crypto/external/bsd/openssh/dist/sftp-server.c up to 1.30 crypto/external/bsd/openssh/dist/sftp.1 up to 1.30 crypto/external/bsd/openssh/dist/sftp.c up to 1.39 crypto/external/bsd/openssh/dist/ssh-add.1 up to 1.18 crypto/external/bsd/openssh/dist/ssh-add.c up to 1.30 crypto/external/bsd/openssh/dist/ssh-agent.1 up to 1.19 crypto/external/bsd/openssh/dist/ssh-agent.c up to 1.37 crypto/external/bsd/openssh/dist/ssh-dss.c up to 1.18 crypto/external/bsd/openssh/dist/ssh-ecdsa.c up to 1.15 crypto/external/bsd/openssh/dist/ssh-ed25519.c up to 1.10 crypto/external/bsd/openssh/dist/ssh-gss.h up to 1.10 crypto/external/bsd/openssh/dist/ssh-keygen.1 up to 1.34 crypto/external/bsd/openssh/dist/ssh-keygen.c up to 1.46 crypto/external/bsd/openssh/dist/ssh-keyscan.1 up to 1.18 crypto/external/bsd/openssh/dist/ssh-keyscan.c up to 1.32 crypto/external/bsd/openssh/dist/ssh-keysign.8 up to 1.14 crypto/external/bsd/openssh/dist/ssh-keysign.c up to 1.24 crypto/external/bsd/openssh/dist/ssh-pkcs11-client.c up to 1.19 crypto/external/bsd/openssh/dist/ssh-pkcs11-helper.8 up to 1.12 crypto/external/bsd/openssh/dist/ssh-pkcs11-helper.c up to 1.22 crypto/external/bsd/openssh/dist/ssh-pkcs11.c up to 1.26 crypto/external/bsd/openssh/dist/ssh-pkcs11.h up to 1.9 crypto/external/bsd/openssh/dist/ssh-rsa.c up to 1.19 crypto/external/bsd/openssh/dist/ssh-xmss.c up to 1.6 crypto/external/bsd/openssh/dist/ssh.1 up to 1.39 crypto/external/bsd/openssh/dist/ssh.c up to 1.45 crypto/external/bsd/openssh/dist/ssh.h up to 1.13 crypto/external/bsd/openssh/dist/ssh2.h up to 1.15 crypto/external/bsd/openssh/dist/ssh_api.c up to 1.15 crypto/external/bsd/openssh/dist/ssh_config up to 1.16 crypto/external/bsd/openssh/dist/ssh_config.5 up to 1.40 crypto/external/bsd/openssh/dist/sshbuf-getput-basic.c up to 1.12 crypto/external/bsd/openssh/dist/sshbuf-getput-crypto.c up to 1.11 crypto/external/bsd/openssh/dist/sshbuf-misc.c up to 1.14 crypto/external/bsd/openssh/dist/sshbuf.c up to 1.14 crypto/external/bsd/openssh/dist/sshbuf.h up to 1.19 crypto/external/bsd/openssh/dist/sshconnect.c up to 1.37 crypto/external/bsd/openssh/dist/sshconnect.h up to 1.17 crypto/external/bsd/openssh/dist/sshconnect2.c up to 1.46 crypto/external/bsd/openssh/dist/sshd.8 up to 1.31 crypto/external/bsd/openssh/dist/sshd.c up to 1.50 crypto/external/bsd/openssh/dist/sshd_config up to 1.28 crypto/external/bsd/openssh/dist/sshd_config.5 up to 1.42 crypto/external/bsd/openssh/dist/ssherr.c up to 1.10 crypto/external/bsd/openssh/dist/ssherr.h up to 1.4 crypto/external/bsd/openssh/dist/sshkey-xmss.c up to 1.10 crypto/external/bsd/openssh/dist/sshkey-xmss.h up to 1.5 crypto/external/bsd/openssh/dist/sshkey.c up to 1.32 crypto/external/bsd/openssh/dist/sshkey.h up to 1.19 crypto/external/bsd/openssh/dist/sshlogin.c up to 1.13 crypto/external/bsd/openssh/dist/sshpty.c up to 1.8 crypto/external/bsd/openssh/dist/ttymodes.c up to 1.12 crypto/external/bsd/openssh/dist/uidswap.c up to 1.10 crypto/external/bsd/openssh/dist/umac.c up to 1.22 crypto/external/bsd/openssh/dist/umac.h up to 1.10 crypto/external/bsd/openssh/dist/utf8.c up to 1.9 crypto/external/bsd/openssh/dist/utf8.h up to 1.5 crypto/external/bsd/openssh/dist/version.h up to 1.44 crypto/external/bsd/openssh/dist/xmalloc.c up to 1.13 crypto/external/bsd/openssh/dist/xmalloc.h up to 1.16 crypto/external/bsd/openssh/dist/xmss_hash.c up to 1.3 crypto/external/bsd/openssh/dist/moduli-gen/Makefile up to 1.3 crypto/external/bsd/openssh/dist/moduli-gen/moduli-gen.sh up to 1.1.1.3 crypto/external/bsd/openssh/dist/moduli-gen/moduli.2048 up to 1.16 crypto/external/bsd/openssh/dist/moduli-gen/moduli.3072 up to 1.18 crypto/external/bsd/openssh/dist/moduli-gen/moduli.4096 up to 1.18 crypto/external/bsd/openssh/dist/moduli-gen/moduli.6144 up to 1.18 crypto/external/bsd/openssh/dist/moduli-gen/moduli.7680 up to 1.18 crypto/external/bsd/openssh/dist/moduli-gen/moduli.8192 up to 1.18 crypto/external/bsd/openssh/lib/Makefile up to 1.38 crypto/external/bsd/openssh/lib/shlib_version up to 1.36 crypto/external/bsd/openssh/openssh2netbsd up to 1.4 lib/libpam/modules/pam_ssh/Makefile up to 1.13 lib/libpam/modules/pam_ssh/pam_ssh.c up to 1.30 distrib/sets/lists/base/shl.mi (apply patch) distrib/sets/lists/debug/shl.mi (apply patch) doc/3RDPARTY (apply patch) Update OpenSSH to 9.6.
Merge local changes between 8.5 and 8.6
Import OpenSSH-8.6:
Future deprecation notice
=========================
It is now possible[1] to perform chosen-prefix attacks against the
SHA-1 algorithm for less than USD$50K.
In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1
hash algorithm in conjunction with the RSA public key algorithm.
OpenSSH will disable this signature scheme by default in the near
future.
Note that the deactivation of "ssh-rsa" signatures does not necessarily
require cessation of use for RSA keys. In the SSH protocol, keys may be
capable of signing using multiple algorithms. In particular, "ssh-rsa"
keys are capable of signing using "rsa-sha2-256" (RSA/SHA256),
"rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of
these is being turned off by default.
This algorithm is unfortunately still used widely despite the
existence of better alternatives, being the only remaining public key
signature algorithm specified by the original SSH RFCs that is still
enabled by default.
The better alternatives include:
* The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These
algorithms have the advantage of using the same key type as
"ssh-rsa" but use the safe SHA-2 hash algorithms. These have been
supported since OpenSSH 7.2 and are already used by default if the
client and server support them.
* The RFC8709 ssh-ed25519 signature algorithm. It has been supported
in OpenSSH since release 6.5.
* The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These
have been supported by OpenSSH since release 5.7.
To check whether a server is using the weak ssh-rsa public key
algorithm, for host authentication, try to connect to it after
removing the ssh-rsa algorithm from ssh(1)'s allowed list:
ssh -oHostKeyAlgorithms=-ssh-rsa user@host
If the host key verification fails and no other supported host key
types are available, the server software on that host should be
upgraded.
OpenSSH recently enabled the UpdateHostKeys option by default to assist
the client by automatically migrating to better algorithms.
[1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and
Application to the PGP Web of Trust" Leurent, G and Peyrin, T
(2020) https://eprint.iacr.org/2020/014.pdf
Security
========
* sshd(8): OpenSSH 8.5 introduced the LogVerbose keyword. When this
option was enabled with a set of patterns that activated logging
in code that runs in the low-privilege sandboxed sshd process, the
log messages were constructed in such a way that printf(3) format
strings could effectively be specified the low-privilege code.
An attacker who had sucessfully exploited the low-privilege
process could use this to escape OpenSSH's sandboxing and attack
the high-privilege process. Exploitation of this weakness is
highly unlikely in practice as the LogVerbose option is not
enabled by default and is typically only used for debugging. No
vulnerabilities in the low-privilege process are currently known
to exist.
Thanks to Ilja Van Sprundel for reporting this bug.
Changes since OpenSSH 8.5
=========================
This release contains mostly bug fixes.
New features
------------
* sftp-server(8): add a new limits@openssh.com protocol extension
that allows a client to discover various server limits, including
maximum packet size and maximum read/write length.
* sftp(1): use the new limits@openssh.com extension (when available)
to select better transfer lengths in the client.
* sshd(8): Add ModuliFile keyword to sshd_config to specify the
location of the "moduli" file containing the groups for DH-GEX.
* unit tests: Add a TEST_SSH_ELAPSED_TIMES environment variable to
enable printing of the elapsed time in seconds of each test.
Bugfixes
--------
* ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in
manual pages with the current default. GHPR#174
* ssh(1): ensure that pkcs11_del_provider() is called before exit.
GHPR#234
* ssh(1), sshd(8): fix problems in string->argv conversion. Multiple
backslashes were not being dequoted correctly and quoted space in
the middle of a string was being incorrectly split. GHPR#223
* ssh(1): return non-zero exit status when killed by signal; bz#3281
* sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum
packet size. Also handle zero-length reads that are not explicitly
banned by the spec.
Portability
-----------
* sshd(8): don't mistakenly exit on transient read errors on the
network socket (e.g. EINTR, EAGAIN); bz3297
* Create a dedicated contrib/gnome-ssk-askpass3.c source instead of
building it from the same file as used for GNOME2. Use the GNOME3
gdk_seat_grab() to manage keyboard/mouse/server grabs for better
compatibility with Wayland.
* Fix portability build errors bz3293 bz3292 bz3291 bz3278
* sshd(8): soft-disallow the fstatat64 syscall in the Linux
seccomp-bpf sandbox. bz3276
* unit tests: enable autoopt and misc unit tests that were
previously skipped
merge local changes between openssh 8.4 and 8.5
OpenSSH 8.5/8.5p1 (2021-03-03)
OpenSSH 8.5 was released on 2021-03-03. It is available from the
mirrors listed at https://www.openssh.com/.
OpenSSH is a 100% complete SSH protocol 2.0 implementation and
includes sftp client and server support.
Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:
https://www.openssh.com/donations.html
Future deprecation notice
=========================
It is now possible[1] to perform chosen-prefix attacks against the
SHA-1 algorithm for less than USD$50K.
In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1
hash algorithm in conjunction with the RSA public key algorithm.
OpenSSH will disable this signature scheme by default in the near
future.
Note that the deactivation of "ssh-rsa" signatures does not necessarily
require cessation of use for RSA keys. In the SSH protocol, keys may be
capable of signing using multiple algorithms. In particular, "ssh-rsa"
keys are capable of signing using "rsa-sha2-256" (RSA/SHA256),
"rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of
these is being turned off by default.
This algorithm is unfortunately still used widely despite the
existence of better alternatives, being the only remaining public key
signature algorithm specified by the original SSH RFCs that is still
enabled by default.
The better alternatives include:
* The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These
algorithms have the advantage of using the same key type as
"ssh-rsa" but use the safe SHA-2 hash algorithms. These have been
supported since OpenSSH 7.2 and are already used by default if the
client and server support them.
* The RFC8709 ssh-ed25519 signature algorithm. It has been supported
in OpenSSH since release 6.5.
* The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These
have been supported by OpenSSH since release 5.7.
To check whether a server is using the weak ssh-rsa public key
algorithm, for host authentication, try to connect to it after
removing the ssh-rsa algorithm from ssh(1)'s allowed list:
ssh -oHostKeyAlgorithms=-ssh-rsa user@host
If the host key verification fails and no other supported host key
types are available, the server software on that host should be
upgraded.
This release enables the UpdateHostKeys option by default to assist
the client by automatically migrating to better algorithms.
[1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and
Application to the PGP Web of Trust" Leurent, G and Peyrin, T
(2020) https://eprint.iacr.org/2020/014.pdf
Security
========
* ssh-agent(1): fixed a double-free memory corruption that was
introduced in OpenSSH 8.2 . We treat all such memory faults as
potentially exploitable. This bug could be reached by an attacker
with access to the agent socket.
On modern operating systems where the OS can provide information
about the user identity connected to a socket, OpenSSH ssh-agent
and sshd limit agent socket access only to the originating user
and root. Additional mitigation may be afforded by the system's
malloc(3)/free(3) implementation, if it detects double-free
conditions.
The most likely scenario for exploitation is a user forwarding an
agent either to an account shared with a malicious user or to a
host with an attacker holding root access.
* Portable sshd(8): Prevent excessively long username going to PAM.
This is a mitigation for a buffer overflow in Solaris' PAM username
handling (CVE-2020-14871), and is only enabled for Sun-derived PAM
implementations. This is not a problem in sshd itself, it only
prevents sshd from being used as a vector to attack Solaris' PAM.
It does not prevent the bug in PAM from being exploited via some
other PAM application. GHPR212
Potentially-incompatible changes
================================
This release includes a number of changes that may affect existing
configurations:
* ssh(1), sshd(8): this release changes the first-preference signature
algorithm from ECDSA to ED25519.
* ssh(1), sshd(8): set the TOS/DSCP specified in the configuration
for interactive use prior to TCP connect. The connection phase of
the SSH session is time-sensitive and often explicitly interactive.
The ultimate interactive/bulk TOS/DSCP will be set after
authentication completes.
* ssh(1), sshd(8): remove the pre-standardization cipher
rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before
it was standardized in RFC4253 (2006), has been deprecated and
disabled by default since OpenSSH 7.2 (2016) and was only briefly
documented in ssh.1 in 2001.
* ssh(1), sshd(8): update/replace the experimental post-quantum
hybrid key exchange method based on Streamlined NTRU Prime coupled
with X25519.
The previous sntrup4591761x25519-sha512@tinyssh.org method is
replaced with sntrup761x25519-sha512@openssh.com. Per its
designers, the sntrup4591761 algorithm was superseded almost two
years ago by sntrup761.
(note this both the updated method and the one that it replaced are
disabled by default)
* ssh(1): disable CheckHostIP by default. It provides insignificant
benefits while making key rotation significantly more difficult,
especially for hosts behind IP-based load-balancers.
Changes since OpenSSH 8.4
=========================
New features
------------
* ssh(1): this release enables UpdateHostkeys by default subject to
some conservative preconditions:
- The key was matched in the UserKnownHostsFile (and not in the
GlobalKnownHostsFile).
- The same key does not exist under another name.
- A certificate host key is not in use.
- known_hosts contains no matching wildcard hostname pattern.
- VerifyHostKeyDNS is not enabled.
- The default UserKnownHostsFile is in use.
We expect some of these conditions will be modified or relaxed in
future.
* ssh(1), sshd(8): add a new LogVerbose configuration directive for
that allows forcing maximum debug logging by file/function/line
pattern-lists.
* ssh(1): when prompting the user to accept a new hostkey, display
any other host names/addresses already associated with the key.
* ssh(1): allow UserKnownHostsFile=none to indicate that no
known_hosts file should be used to identify host keys.
* ssh(1): add a ssh_config KnownHostsCommand option that allows the
client to obtain known_hosts data from a command in addition to
the usual files.
* ssh(1): add a ssh_config PermitRemoteOpen option that allows the
client to restrict the destination when RemoteForward is used
with SOCKS.
* ssh(1): for FIDO keys, if a signature operation fails with a
"incorrect PIN" reason and no PIN was initially requested from the
user, then request a PIN and retry the operation. This supports
some biometric devices that fall back to requiring PIN when reading
of the biometric failed, and devices that require PINs for all
hosted credentials.
* sshd(8): implement client address-based rate-limiting via new
sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
directives that provide more fine-grained control on a per-origin
address basis than the global MaxStartups limit.
Bugfixes
--------
* ssh(1): Prefix keyboard interactive prompts with "(user@host)" to
make it easier to determine which connection they are associated
with in cases like scp -3, ProxyJump, etc. bz#3224
* sshd(8): fix sshd_config SetEnv directives located inside Match
blocks. GHPR201
* ssh(1): when requesting a FIDO token touch on stderr, inform the
user once the touch has been recorded.
* ssh(1): prevent integer overflow when ridiculously large
ConnectTimeout values are specified, capping the effective value
(for most platforms) at 24 days. bz#3229
* ssh(1): consider the ECDSA key subtype when ordering host key
algorithms in the client.
* ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
PubkeyAcceptedAlgorithms. The previous name incorrectly suggested
that it control allowed key algorithms, when this option actually
specifies the signature algorithms that are accepted. The previous
name remains available as an alias. bz#3253
* ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
* sftp-server(8): add missing lsetstat@openssh.com documentation
and advertisement in the server's SSH2_FXP_VERSION hello packet.
* ssh(1), sshd(8): more strictly enforce KEX state-machine by
banning packet types once they are received. Fixes memleak caused
by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078).
* sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
platforms instead of being limited by LONG_MAX. bz#3206
* Minor man page fixes (capitalization, commas, etc.) bz#3223
* sftp(1): when doing an sftp recursive upload or download of a
read-only directory, ensure that the directory is created with
write and execute permissions in the interim so that the transfer
can actually complete, then set the directory permission as the
final step. bz#3222
* ssh-keygen(1): document the -Z, check the validity of its argument
earlier and provide a better error message if it's not correct.
bz#2879
* ssh(1): ignore comments at the end of config lines in ssh_config,
similar to what we already do for sshd_config. bz#2320
* sshd_config(5): mention that DisableForwarding is valid in a
sshd_config Match block. bz3239
* sftp(1): fix incorrect sorting of "ls -ltr" under some
circumstances. bz3248.
* ssh(1), sshd(8): fix potential integer truncation of (unlikely)
timeout values. bz#3250
* ssh(1): make hostbased authentication send the signature algorithm
in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type.
This make HostbasedAcceptedAlgorithms do what it is supposed to -
filter on signature algorithm and not key type.
Portability
-----------
* sshd(8): add a number of platform-specific syscalls to the Linux
seccomp-bpf sandbox. bz#3232 bz#3260
* sshd(8): remove debug message from sigchld handler that could cause
deadlock on some platforms. bz#3259
* Sync contrib/ssh-copy-id with upstream.
* unittests: add a hostname function for systems that don't have it.
Some systems don't have a hostname command (it's not required by
POSIX). The do have uname -n (which is), but not all of those have
it report the FQDN.
Checksums:
==========
- SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e
- SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU=
- SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e
- SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU=
Please note that the SHA256 signatures are base64 encoded and not
hexadecimal (which is the default for most checksum tools). The PGP
key used to sign the releases is available from the mirror sites:
https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc
Please note that the OpenPGP key used to sign releases has been
rotated for this release. The new key has been signed by the previous
key to provide continuity.
Reporting Bugs:
===============
- Please read https://www.openssh.com/report.html
Security bugs should be reported directly to openssh@openssh.com
Mostly merge changes from HEAD upto 20200411
merge openssh-8.1
OpenSSH 8.1 was released on 2019-10-09. It is available from the mirrors listed at https://www.openssh.com/. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Security ======== * ssh(1), sshd(8), ssh-add(1), ssh-keygen(1): an exploitable integer overflow bug was found in the private key parsing code for the XMSS key type. This key type is still experimental and support for it is not compiled by default. No user-facing autoconf option exists in portable OpenSSH to enable it. This bug was found by Adam Zabrocki and reported via SecuriTeam's SSD program. * ssh(1), sshd(8), ssh-agent(1): add protection for private keys at rest in RAM against speculation and memory side-channel attacks like Spectre, Meltdown and Rambleed. This release encrypts private keys when they are not in use with a symmetric key that is derived from a relatively large "prekey" consisting of random data (currently 16KB). Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh-keygen(1): when acting as a CA and signing certificates with an RSA key, default to using the rsa-sha2-512 signature algorithm. Certificates signed by RSA keys will therefore be incompatible with OpenSSH versions prior to 7.2 unless the default is overridden (using "ssh-keygen -t ssh-rsa -s ...").
Sync with HEAD
merge conflicts.
Import 8.0: Security ======== This release contains mitigation for a weakness in the scp(1) tool and protocol (CVE-2019-6111): when copying files from a remote system to a local directory, scp(1) did not verify that the filenames that the server sent matched those requested by the client. This could allow a hostile server to create or clobber unexpected local files with attacker-controlled content. This release adds client-side checking that the filenames sent from the server match the command-line request, The scp protocol is outdated, inflexible and not readily fixed. We recommend the use of more modern protocols like sftp and rsync for file transfer instead. Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * scp(1): Relating to the above changes to scp(1); the scp protocol relies on the remote shell for wildcard expansion, so there is no infallible way for the client's wildcard matching to perfectly reflect the server's. If there is a difference between client and server wildcard expansion, the client may refuse files from the server. For this reason, we have provided a new "-T" flag to scp that disables these client-side checks at the risk of reintroducing the attack described above. * sshd(8): Remove support for obsolete "host/port" syntax. Slash- separated host/port was added in 2001 as an alternative to host:port syntax for the benefit of IPv6 users. These days there are establised standards for this like [::1]:22 and the slash syntax is easily mistaken for CIDR notation, which OpenSSH supports for some things. Remove the slash notation from ListenAddress and PermitOpen; bz#2335 Changes since OpenSSH 7.9 ========================= This release is focused on new features and internal refactoring. New Features ------------ * ssh(1), ssh-agent(1), ssh-add(1): Add support for ECDSA keys in PKCS#11 tokens. * ssh(1), sshd(8): Add experimental quantum-computing resistant key exchange method, based on a combination of Streamlined NTRU Prime 4591^761 and X25519. * ssh-keygen(1): Increase the default RSA key size to 3072 bits, following NIST Special Publication 800-57's guidance for a 128-bit equivalent symmetric security level. * ssh(1): Allow "PKCS11Provider=none" to override later instances of the PKCS11Provider directive in ssh_config; bz#2974 * sshd(8): Add a log message for situations where a connection is dropped for attempting to run a command but a sshd_config ForceCommand=internal-sftp restriction is in effect; bz#2960 * ssh(1): When prompting whether to record a new host key, accept the key fingerprint as a synonym for "yes". This allows the user to paste a fingerprint obtained out of band at the prompt and have the client do the comparison for you. * ssh-keygen(1): When signing multiple certificates on a single command-line invocation, allow automatically incrementing the certificate serial number. * scp(1), sftp(1): Accept -J option as an alias to ProxyJump on the scp and sftp command-lines. * ssh-agent(1), ssh-pkcs11-helper(8), ssh-add(1): Accept "-v" command-line flags to increase the verbosity of output; pass verbose flags though to subprocesses, such as ssh-pkcs11-helper started from ssh-agent. * ssh-add(1): Add a "-T" option to allowing testing whether keys in an agent are usable by performing a signature and a verification. * sftp-server(8): Add a "lsetstat@openssh.com" protocol extension that replicates the functionality of the existing SSH2_FXP_SETSTAT operation but does not follow symlinks. bz#2067 * sftp(1): Add "-h" flag to chown/chgrp/chmod commands to request they do not follow symlinks. * sshd(8): Expose $SSH_CONNECTION in the PAM environment. This makes the connection 4-tuple available to PAM modules that wish to use it in decision-making. bz#2741 * sshd(8): Add a ssh_config "Match final" predicate Matches in same pass as "Match canonical" but doesn't require hostname canonicalisation be enabled. bz#2906 * sftp(1): Support a prefix of '@' to suppress echo of sftp batch commands; bz#2926 * ssh-keygen(1): When printing certificate contents using "ssh-keygen -Lf /path/certificate", include the algorithm that the CA used to sign the cert. Bugfixes -------- * sshd(8): Fix authentication failures when sshd_config contains "AuthenticationMethods any" inside a Match block that overrides a more restrictive default. * sshd(8): Avoid sending duplicate keepalives when ClientAliveCount is enabled. * sshd(8): Fix two race conditions related to SIGHUP daemon restart. Remnant file descriptors in recently-forked child processes could block the parent sshd's attempt to listen(2) to the configured addresses. Also, the restarting parent sshd could exit before any child processes that were awaiting their re-execution state had completed reading it, leaving them in a fallback path. * ssh(1): Fix stdout potentially being redirected to /dev/null when ProxyCommand=- was in use. * sshd(8): Avoid sending SIGPIPE to child processes if they attempt to write to stderr after their parent processes have exited; bz#2071 * ssh(1): Fix bad interaction between the ssh_config ConnectTimeout and ConnectionAttempts directives - connection attempts after the first were ignoring the requested timeout; bz#2918 * ssh-keyscan(1): Return a non-zero exit status if no keys were found; bz#2903 * scp(1): Sanitize scp filenames to allow UTF-8 characters without terminal control sequences; bz#2434 * sshd(8): Fix confusion between ClientAliveInterval and time-based RekeyLimit that could cause connections to be incorrectly closed. bz#2757 * ssh(1), ssh-add(1): Correct some bugs in PKCS#11 token PIN handling at initial token login. The attempt to read the PIN could be skipped in some cases, particularly on devices with integrated PIN readers. This would lead to an inability to retrieve keys from these tokens. bz#2652 * ssh(1), ssh-add(1): Support keys on PKCS#11 tokens that set the CKA_ALWAYS_AUTHENTICATE flag by requring a fresh login after the C_SignInit operation. bz#2638 * ssh(1): Improve documentation for ProxyJump/-J, clarifying that local configuration does not apply to jump hosts. * ssh-keygen(1): Clarify manual - ssh-keygen -e only writes public keys, not private. * ssh(1), sshd(8): be more strict in processing protocol banners, allowing \r characters only immediately before \n. * Various: fix a number of memory leaks, including bz#2942 and bz#2938 * scp(1), sftp(1): fix calculation of initial bandwidth limits. Account for bytes written before the timer starts and adjust the schedule on which recalculations are performed. Avoids an initial burst of traffic and yields more accurate bandwidth limits; bz#2927 * sshd(8): Only consider the ext-info-c extension during the initial key eschange. It shouldn't be sent in subsequent ones, but if it is present we should ignore it. This prevents sshd from sending a SSH_MSG_EXT_INFO for REKEX for buggy these clients. bz#2929 * ssh-keygen(1): Clarify manual that ssh-keygen -F (find host in authorized_keys) and -R (remove host from authorized_keys) options may accept either a bare hostname or a [hostname]:port combo. bz#2935 * ssh(1): Don't attempt to connect to empty SSH_AUTH_SOCK; bz#2936 * sshd(8): Silence error messages when sshd fails to load some of the default host keys. Failure to load an explicitly-configured hostkey is still an error, and failure to load any host key is still fatal. pr/103 * ssh(1): Redirect stderr of ProxyCommands to /dev/null when ssh is started with ControlPersist; prevents random ProxyCommand output from interfering with session output. * ssh(1): The ssh client was keeping a redundant ssh-agent socket (leftover from authentication) around for the life of the connection; bz#2912 * sshd(8): Fix bug in HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options. If only RSA-SHA2 siganture types were specified, then authentication would always fail for RSA keys as the monitor checks only the base key (not the signature algorithm) type against *AcceptedKeyTypes. bz#2746 * ssh(1): Request correct signature types from ssh-agent when certificate keys and RSA-SHA2 signatures are in use. Portability ----------- * sshd(8): On Cygwin, run as SYSTEM where possible, using S4U for token creation if it supports MsV1_0 S4U Logon. * sshd(8): On Cygwin, use custom user/group matching code that respects the OS' behaviour of case-insensitive matching. * sshd(8): Don't set $MAIL if UsePAM=yes as PAM typically specifies the user environment if it's enabled; bz#2937 * sshd(8) Cygwin: Change service name to cygsshd to avoid collision with Microsoft's OpenSSH port. * Allow building against OpenSSL -dev (3.x) * Fix a number of build problems against version configurations and versions of OpenSSL. Including bz#2931 and bz#2921 * Improve warnings in cygwin service setup. bz#2922 * Remove hardcoded service name in cygwin setup. bz#2922
Merge the [pgoyette-compat] branch
Sync with HEAD Resolve a couple of conflicts (result of the uimin/uimax changes)
merge conflicts
Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh-keygen(1): write OpenSSH format private keys by default instead of using OpenSSL's PEM format. The OpenSSH format, supported in OpenSSH releases since 2014 and described in the PROTOCOL.key file in the source distribution, offers substantially better protection against offline password guessing and supports key comments in private keys. If necessary, it is possible to write old PEM-style keys by adding "-m PEM" to ssh-keygen's arguments when generating or updating a key. * sshd(8): remove internal support for S/Key multiple factor authentication. S/Key may still be used via PAM or BSD auth. * ssh(1): remove vestigal support for running ssh(1) as setuid. This used to be required for hostbased authentication and the (long gone) rhosts-style authentication, but has not been necessary for a long time. Attempting to execute ssh as a setuid binary, or with uid != effective uid will now yield a fatal error at runtime. * sshd(8): the semantics of PubkeyAcceptedKeyTypes and the similar HostbasedAcceptedKeyTypes options have changed. These now specify signature algorithms that are accepted for their respective authentication mechanism, where previously they specified accepted key types. This distinction matters when using the RSA/SHA2 signature algorithms "rsa-sha2-256", "rsa-sha2-512" and their certificate counterparts. Configurations that override these options but omit these algorithm names may cause unexpected authentication failures (no action is required for configurations that accept the default for these options). * sshd(8): the precedence of session environment variables has changed. ~/.ssh/environment and environment="..." options in authorized_keys files can no longer override SSH_* variables set implicitly by sshd. * ssh(1)/sshd(8): the default IPQoS used by ssh/sshd has changed. They will now use DSCP AF21 for interactive traffic and CS1 for bulk. For a detailed rationale, please see the commit message: https://cvsweb.openbsd.org/src/usr.bin/ssh/readconf.c#rev1.284
Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
merge conflicts
OpenSSH 7.7 was released on 2018-04-02. It is available from the mirrors listed at http://www.openssh.com/ shortly. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh(1)/sshd(8): Drop compatibility support for some very old SSH implementations, including ssh.com <=2.* and OpenSSH <= 3.*. These versions were all released in or before 2001 and predate the final SSH RFCs. The support in question isn't necessary for RFC-compliant SSH implementations. Changes since OpenSSH 7.6 ========================= This is primarily a bugfix release. New Features ------------ * All: Add experimental support for PQC XMSS keys (Extended Hash- Based Signatures) based on the algorithm described in https://tools.ietf.org/html/draft-irtf-cfrg-xmss-hash-based-signatures-12 The XMSS signature code is experimental and not compiled in by default. * sshd(8): Add a "rdomain" criteria for the sshd_config Match keyword to allow conditional configuration that depends on which routing domain a connection was received on (currently supported on OpenBSD and Linux). * sshd_config(5): Add an optional rdomain qualifier to the ListenAddress directive to allow listening on different routing domains. This is supported only on OpenBSD and Linux at present. * sshd_config(5): Add RDomain directive to allow the authenticated session to be placed in an explicit routing domain. This is only supported on OpenBSD at present. * sshd(8): Add "expiry-time" option for authorized_keys files to allow for expiring keys. * ssh(1): Add a BindInterface option to allow binding the outgoing connection to an interface's address (basically a more usable BindAddress) * ssh(1): Expose device allocated for tun/tap forwarding via a new %T expansion for LocalCommand. This allows LocalCommand to be used to prepare the interface. * sshd(8): Expose the device allocated for tun/tap forwarding via a new SSH_TUNNEL environment variable. This allows automatic setup of the interface and surrounding network configuration automatically on the server. * ssh(1)/scp(1)/sftp(1): Add URI support to ssh, sftp and scp, e.g. ssh://user@host or sftp://user@host/path. Additional connection parameters described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since the ssh fingerprint format in the draft uses the deprecated MD5 hash with no way to specify the any other algorithm. * ssh-keygen(1): Allow certificate validity intervals that specify only a start or stop time (instead of both or neither). * sftp(1): Allow "cd" and "lcd" commands with no explicit path argument. lcd will change to the local user's home directory as usual. cd will change to the starting directory for session (because the protocol offers no way to obtain the remote user's home directory). bz#2760 * sshd(8): When doing a config test with sshd -T, only require the attributes that are actually used in Match criteria rather than (an incomplete list of) all criteria. Bugfixes -------- * ssh(1)/sshd(8): More strictly check signature types during key exchange against what was negotiated. Prevents downgrade of RSA signatures made with SHA-256/512 to SHA-1. * sshd(8): Fix support for client that advertise a protocol version of "1.99" (indicating that they are prepared to accept both SSHv1 and SSHv2). This was broken in OpenSSH 7.6 during the removal of SSHv1 support. bz#2810 * ssh(1): Warn when the agent returns a ssh-rsa (SHA1) signature when a rsa-sha2-256/512 signature was requested. This condition is possible when an old or non-OpenSSH agent is in use. bz#2799 * ssh-agent(1): Fix regression introduced in 7.6 that caused ssh-agent to fatally exit if presented an invalid signature request message. * sshd_config(5): Accept yes/no flag options case-insensitively, as has been the case in ssh_config(5) for a long time. bz#2664 * ssh(1): Improve error reporting for failures during connection. Under some circumstances misleading errors were being shown. bz#2814 * ssh-keyscan(1): Add -D option to allow printing of results directly in SSHFP format. bz#2821 * regress tests: fix PuTTY interop test broken in last release's SSHv1 removal. bz#2823 * ssh(1): Compatibility fix for some servers that erroneously drop the connection when the IUTF8 (RFC8160) option is sent. * scp(1): Disable RemoteCommand and RequestTTY in the ssh session started by scp (sftp was already doing this.) * ssh-keygen(1): Refuse to create a certificate with an unusable number of principals. * ssh-keygen(1): Fatally exit if ssh-keygen is unable to write all the public key during key generation. Previously it would silently ignore errors writing the comment and terminating newline. * ssh(1): Do not modify hostname arguments that are addresses by automatically forcing them to lower-case. Instead canonicalise them to resolve ambiguities (e.g. ::0001 => ::1) before they are matched against known_hosts. bz#2763 * ssh(1): Don't accept junk after "yes" or "no" responses to hostkey prompts. bz#2803 * sftp(1): Have sftp print a warning about shell cleanliness when decoding the first packet fails, which is usually caused by shells polluting stdout of non-interactive startups. bz#2800 * ssh(1)/sshd(8): Switch timers in packet code from using wall-clock time to monotonic time, allowing the packet layer to better function over a clock step and avoiding possible integer overflows during steps. * Numerous manual page fixes and improvements. Portability ----------- * sshd(8): Correctly detect MIPS ABI in use at configure time. Fixes sandbox violations on some environments. * sshd(8): Remove UNICOS support. The hardware and software are literal museum pieces and support in sshd is too intrusive to justify maintaining. * All: Build and link with "retpoline" flags when available to mitigate the "branch target injection" style (variant 2) of the Spectre branch-prediction vulnerability. * All: Add auto-generated dependency information to Makefile. * Numerous fixed to the RPM spec files. Checksums: ========== - SHA1 (openssh-7.7.tar.gz) = 24812e05fa233014c847c7775748316e7f8a836c - SHA256 (openssh-7.7.tar.gz) = T4ua1L/vgAYqwB0muRahvnm5ZUr3PLY9nPljaG8egvo= - SHA1 (openssh-7.7p1.tar.gz) = 446fe9ed171f289f0d62197dffdbfdaaf21c49f2 - SHA256 (openssh-7.7p1.tar.gz) = 1zvn5oTpnvzQJL4Vowv/y+QbASsvezyQhK7WIXdea48= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available as RELEASE_KEY.asc from the mirror sites. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com
patch for OpenSSL-1.1
Apply patch (requested by mrg in ticket #1468): Update OpenSSH to 7.5.
Apply patch (requested by mrg in ticket #1468): Update OpenSSH to 7.5.
Apply patch (requested by mrg in ticket #1468): Update OpenSSH to 7.5.
Sync with HEAD
Sync with HEAD
merge conflicts
Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
merge conflicts
Import OpenSSH-7.4 OpenSSH 7.4 has just been released. It will be available from the mirrors listed at http://www.openssh.com/ shortly. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. OpenSSH also includes transitional support for the legacy SSH 1.3 and 1.5 protocols that may be enabled at compile-time. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Future deprecation notice ========================= We plan on retiring more legacy cryptography in future releases, specifically: * In approximately August 2017, removing remaining support for the SSH v.1 protocol (client-only and currently compile-time disabled). * In the same release, removing support for Blowfish and RC4 ciphers and the RIPE-MD160 HMAC. (These are currently run-time disabled). * Refusing all RSA keys smaller than 1024 bits (the current minimum is 768 bits) * The next release of OpenSSH will remove support for running sshd(8) with privilege separation disabled. * The next release of portable OpenSSH will remove support for OpenSSL version prior to 1.0.1. This list reflects our current intentions, but please check the final release notes for future releases. Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * This release removes server support for the SSH v.1 protocol. * ssh(1): Remove 3des-cbc from the client's default proposal. 64-bit block ciphers are not safe in 2016 and we don't want to wait until attacks like SWEET32 are extended to SSH. As 3des-cbc was the only mandatory cipher in the SSH RFCs, this may cause problems connecting to older devices using the default configuration, but it's highly likely that such devices already need explicit configuration for key exchange and hostkey algorithms already anyway. * sshd(8): Remove support for pre-authentication compression. Doing compression early in the protocol probably seemed reasonable in the 1990s, but today it's clearly a bad idea in terms of both cryptography (cf. multiple compression oracle attacks in TLS) and attack surface. Pre-auth compression support has been disabled by default for >10 years. Support remains in the client. * ssh-agent will refuse to load PKCS#11 modules outside a whitelist of trusted paths by default. The path whitelist may be specified at run-time. * sshd(8): When a forced-command appears in both a certificate and an authorized keys/principals command= restriction, sshd will now refuse to accept the certificate unless they are identical. The previous (documented) behaviour of having the certificate forced-command override the other could be a bit confusing and error-prone. * sshd(8): Remove the UseLogin configuration directive and support for having /bin/login manage login sessions.
Sync with HEAD
merge conflicts.
OpenSSH 7.3 has just been released. It will be available from the mirrors listed at http://www.openssh.com/ shortly. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. OpenSSH also includes transitional support for the legacy SSH 1.3 and 1.5 protocols that may be enabled at compile-time. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Future deprecation notice ========================= We plan on retiring more legacy cryptography in a near-future release, specifically: * Refusing all RSA keys smaller than 1024 bits (the current minimum is 768 bits) * Removing server-side support for the SSH v.1 protocol (currently compile-time disabled). * In approximately 1 year, removing all support for the SSH v.1 protocol (currently compile-time disabled). This list reflects our current intentions, but please check the final release notes for future releases. Changes since OpenSSH 7.2 ========================= This is primarily a bugfix release. Security -------- * sshd(8): Mitigate a potential denial-of-service attack against the system's crypt(3) function via sshd(8). An attacker could send very long passwords that would cause excessive CPU use in crypt(3). sshd(8) now refuses to accept password authentication requests of length greater than 1024 characters. Independently reported by Tomas Kuthan (Oracle), Andres Rojas and Javier Nieto. * sshd(8): Mitigate timing differences in password authentication that could be used to discern valid from invalid account names when long passwords were sent and particular password hashing algorithms are in use on the server. CVE-2016-6210, reported by EddieEzra.Harari at verint.com * ssh(1), sshd(8): Fix observable timing weakness in the CBC padding oracle countermeasures. Reported by Jean Paul Degabriele, Kenny Paterson, Torben Hansen and Martin Albrecht. Note that CBC ciphers are disabled by default and only included for legacy compatibility. * ssh(1), sshd(8): Improve operation ordering of MAC verification for Encrypt-then-MAC (EtM) mode transport MAC algorithms to verify the MAC before decrypting any ciphertext. This removes the possibility of timing differences leaking facts about the plaintext, though no such leakage has been observed. Reported by Jean Paul Degabriele, Kenny Paterson, Torben Hansen and Martin Albrecht. * sshd(8): (portable only) Ignore PAM environment vars when UseLogin=yes. If PAM is configured to read user-specified environment variables and UseLogin=yes in sshd_config, then a hostile local user may attack /bin/login via LD_PRELOAD or similar environment variables set via PAM. CVE-2015-8325, found by Shayan Sadigh. New Features ------------ * ssh(1): Add a ProxyJump option and corresponding -J command-line flag to allow simplified indirection through a one or more SSH bastions or "jump hosts". * ssh(1): Add an IdentityAgent option to allow specifying specific agent sockets instead of accepting one from the environment. * ssh(1): Allow ExitOnForwardFailure and ClearAllForwardings to be optionally overridden when using ssh -W. bz#2577 * ssh(1), sshd(8): Implement support for the IUTF8 terminal mode as per draft-sgtatham-secsh-iutf8-00. * ssh(1), sshd(8): Add support for additional fixed Diffie-Hellman 2K, 4K and 8K groups from draft-ietf-curdle-ssh-kex-sha2-03. * ssh-keygen(1), ssh(1), sshd(8): support SHA256 and SHA512 RSA signatures in certificates; * ssh(1): Add an Include directive for ssh_config(5) files. * ssh(1): Permit UTF-8 characters in pre-authentication banners sent from the server. bz#2058 Bugfixes -------- * ssh(1), sshd(8): Reduce the syslog level of some relatively common protocol events from LOG_CRIT. bz#2585 * sshd(8): Refuse AuthenticationMethods="" in configurations and accept AuthenticationMethods=any for the default behaviour of not requiring multiple authentication. bz#2398 * sshd(8): Remove obsolete and misleading "POSSIBLE BREAK-IN ATTEMPT!" message when forward and reverse DNS don't match. bz#2585 * ssh(1): Close ControlPersist background process stderr except in debug mode or when logging to syslog. bz#1988 * misc: Make PROTOCOL description for direct-streamlocal@openssh.com channel open messages match deployed code. bz#2529 * ssh(1): Deduplicate LocalForward and RemoteForward entries to fix failures when both ExitOnForwardFailure and hostname canonicalisation are enabled. bz#2562 * sshd(8): Remove fallback from moduli to obsolete "primes" file that was deprecated in 2001. bz#2559. * sshd_config(5): Correct description of UseDNS: it affects ssh hostname processing for authorized_keys, not known_hosts; bz#2554 * ssh(1): Fix authentication using lone certificate keys in an agent without corresponding private keys on the filesystem. bz#2550 * sshd(8): Send ClientAliveInterval pings when a time-based RekeyLimit is set; previously keepalive packets were not being sent. bz#2252 Portability ----------- * ssh(1), sshd(8): Fix compilation by automatically disabling ciphers not supported by OpenSSL. bz#2466 * misc: Fix compilation failures on some versions of AIX's compiler related to the definition of the VA_COPY macro. bz#2589 * sshd(8): Whitelist more architectures to enable the seccomp-bpf sandbox. bz#2590 * ssh-agent(1), sftp-server(8): Disable process tracing on Solaris using setpflags(__PROC_PROTECT, ...). bz#2584 * sshd(8): On Solaris, don't call Solaris setproject() with UsePAM=yes it's PAM's responsibility. bz#2425 Checksums: ========== - SHA1 (openssh-7.3.tar.gz) = b1641e5265d9ec68a9a19decc3a7edd1203cbd33 - SHA256 (openssh-7.3.tar.gz) = vS0X35qrX9OOPBkyDMYhOje/DBwHBVEV7nv5rkzw4vM= - SHA1 (openssh-7.3p1.tar.gz) = bfade84283fcba885e2084343ab19a08c7d123a5 - SHA256 (openssh-7.3p1.tar.gz) = P/uYmm3KppWUw7VQ1IVaWi4XGMzd5/XjY4e0JCIPvsw= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available as RELEASE_KEY.asc from the mirror sites. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
merge conflicts
Changes since OpenSSH 6.8 ========================= This is primarily a bugfix release. Security -------- * ssh(1): when forwarding X11 connections with ForwardX11Trusted=no, connections made after ForwardX11Timeout expired could be permitted and no longer subject to XSECURITY restrictions because of an ineffective timeout check in ssh(1) coupled with "fail open" behaviour in the X11 server when clients attempted connections with expired credentials. This problem was reported by Jann Horn. * ssh-agent(1): fix weakness of agent locking (ssh-add -x) to password guessing by implementing an increasing failure delay, storing a salted hash of the password rather than the password itself and using a timing-safe comparison function for verifying unlock attempts. This problem was reported by Ryan Castellucci. New Features ------------ * ssh(1), sshd(8): promote chacha20-poly1305@openssh.com to be the default cipher * sshd(8): support admin-specified arguments to AuthorizedKeysCommand; bz#2081 * sshd(8): add AuthorizedPrincipalsCommand that allows retrieving authorized principals information from a subprocess rather than a file. * ssh(1), ssh-add(1): support PKCS#11 devices with external PIN entry devices bz#2240 * sshd(8): allow GSSAPI host credential check to be relaxed for multihomed hosts via GSSAPIStrictAcceptorCheck option; bz#928 * ssh-keygen(1): support "ssh-keygen -lF hostname" to search known_hosts and print key hashes rather than full keys. * ssh-agent(1): add -D flag to leave ssh-agent in foreground without enabling debug mode; bz#2381 Bugfixes -------- * ssh(1), sshd(8): deprecate legacy SSH2_MSG_KEX_DH_GEX_REQUEST_OLD message and do not try to use it against some 3rd-party SSH implementations that use it (older PuTTY, WinSCP). * Many fixes for problems caused by compile-time deactivation of SSH1 support (including bz#2369) * ssh(1), sshd(8): cap DH-GEX group size at 4Kbits for Cisco implementations as some would fail when attempting to use group sizes >4K; bz#2209 * ssh(1): fix out-of-bound read in EscapeChar configuration option parsing; bz#2396 * sshd(8): fix application of PermitTunnel, LoginGraceTime, AuthenticationMethods and StreamLocalBindMask options in Match blocks * ssh(1), sshd(8): improve disconnection message on TCP reset; bz#2257 * ssh(1): remove failed remote forwards established by muliplexing from the list of active forwards; bz#2363 * sshd(8): make parsing of authorized_keys "environment=" options independent of PermitUserEnv being enabled; bz#2329 * sshd(8): fix post-auth crash with permitopen=none; bz#2355 * ssh(1), ssh-add(1), ssh-keygen(1): allow new-format private keys to be encrypted with AEAD ciphers; bz#2366 * ssh(1): allow ListenAddress, Port and AddressFamily configuration options to appear in any order; bz#86 * sshd(8): check for and reject missing arguments for VersionAddendum and ForceCommand; bz#2281 * ssh(1), sshd(8): don't treat unknown certificate extensions as fatal; bz#2387 * ssh-keygen(1): make stdout and stderr output consistent; bz#2325 * ssh(1): mention missing DISPLAY environment in debug log when X11 forwarding requested; bz#1682 * sshd(8): correctly record login when UseLogin is set; bz#378 * sshd(8): Add some missing options to sshd -T output and fix output of VersionAddendum and HostCertificate. bz#2346 * Document and improve consistency of options that accept a "none" argument" TrustedUserCAKeys, RevokedKeys (bz#2382), AuthorizedPrincipalsFile (bz#2288) * ssh(1): include remote username in debug output; bz#2368 * sshd(8): avoid compatibility problem with some versions of Tera Term, which would crash when they received the hostkeys notification message (hostkeys-00@openssh.com) * sshd(8): mention ssh-keygen -E as useful when comparing legacy MD5 host key fingerprints; bz#2332 * ssh(1): clarify pseudo-terminal request behaviour and use make manual language consistent; bz#1716 * ssh(1): document that the TERM environment variable is not subject to SendEnv and AcceptEnv; bz#2386
Pull up blacklistd(8), requested by christos in ticket #711: crypto/external/bsd/openssh/dist/moduli-gen/Makefile up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli-gen.sh up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.1024 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.1536 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.2048 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.3072 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.4096 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.6144 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.7680 up to 1.1.1.1 crypto/external/bsd/openssh/dist/moduli-gen/moduli.8192 up to 1.1.1.1 crypto/external/bsd/openssh/dist/bcrypt_pbkdf.c up to 1.2 crypto/external/bsd/openssh/dist/kexc25519.c up to 1.3 crypto/external/bsd/openssh/dist/smult_curve25519_ref.c up to 1.3 crypto/external/bsd/openssh/dist/bitmap.c up to 1.2 plus patch crypto/external/bsd/openssh/dist/PROTOCOL.chacha20poly1305 up to 1.1.1.1 crypto/external/bsd/openssh/dist/PROTOCOL.key up to 1.1.1.1 crypto/external/bsd/openssh/dist/blf.h up to 1.1 crypto/external/bsd/openssh/dist/blocks.c up to 1.3 crypto/external/bsd/openssh/dist/blowfish.c up to 1.2 crypto/external/bsd/openssh/dist/chacha.c up to 1.3 crypto/external/bsd/openssh/dist/chacha.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/cipher-aesctr.c up to 1.1.1.2 crypto/external/bsd/openssh/dist/cipher-aesctr.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/cipher-chachapoly.c up to 1.3 crypto/external/bsd/openssh/dist/cipher-chachapoly.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/crypto_api.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/digest-libc.c up to 1.3 crypto/external/bsd/openssh/dist/digest-openssl.c up to 1.3 crypto/external/bsd/openssh/dist/digest.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/ed25519.c up to 1.3 crypto/external/bsd/openssh/dist/fe25519.c up to 1.3 crypto/external/bsd/openssh/dist/fe25519.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/ge25519.c up to 1.3 crypto/external/bsd/openssh/dist/ge25519.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/ge25519_base.data up to 1.1.1.1 crypto/external/bsd/openssh/dist/hash.c up to 1.3 crypto/external/bsd/openssh/dist/hmac.c up to 1.3 crypto/external/bsd/openssh/dist/hmac.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/kexc25519c.c up to 1.3 crypto/external/bsd/openssh/dist/kexc25519s.c up to 1.3 crypto/external/bsd/openssh/dist/poly1305.c up to 1.3 crypto/external/bsd/openssh/dist/poly1305.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/rijndael.c up to 1.1.1.2 crypto/external/bsd/openssh/dist/rijndael.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/sc25519.c up to 1.3 crypto/external/bsd/openssh/dist/sc25519.h up to 1.1.1.1 crypto/external/bsd/openssh/dist/ssh-ed25519.c up to 1.3 crypto/external/bsd/openssh/dist/sshbuf-getput-basic.c up to 1.3 crypto/external/bsd/openssh/dist/sshbuf-getput-crypto.c up to 1.3 crypto/external/bsd/openssh/dist/sshbuf-misc.c up to 1.3 crypto/external/bsd/openssh/dist/sshbuf.c up to 1.3 crypto/external/bsd/openssh/dist/sshbuf.h up to 1.4 crypto/external/bsd/openssh/dist/ssherr.c up to 1.3 crypto/external/bsd/openssh/dist/ssherr.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/sshkey.c up to 1.3 crypto/external/bsd/openssh/dist/sshkey.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/verify.c up to 1.3 crypto/external/bsd/openssh/dist/opacket.c up to 1.2 crypto/external/bsd/openssh/dist/umac128.c up to 1.1 crypto/external/bsd/openssh/dist/pfilter.c up to 1.2 crypto/external/bsd/openssh/dist/pfilter.h up to 1.1 crypto/external/bsd/openssh/dist/bitmap.h up to 1.2 crypto/external/bsd/openssh/dist/opacket.h up to 1.2 crypto/external/bsd/openssh/dist/ssh_api.c up to 1.2 crypto/external/bsd/openssh/dist/ssh_api.h up to 1.2 crypto/external/bsd/openssh/dist/auth2-jpake.c delete crypto/external/bsd/openssh/dist/compress.c delete crypto/external/bsd/openssh/dist/compress.h delete crypto/external/bsd/openssh/dist/jpake.c delete crypto/external/bsd/openssh/dist/jpake.h delete crypto/external/bsd/openssh/dist/schnorr.c delete crypto/external/bsd/openssh/dist/schnorr.h delete crypto/external/bsd/openssh/dist/strtonum.c 1.1 crypto/external/bsd/openssh/Makefile.inc up to 1.8 crypto/external/bsd/openssh/bin/Makefile.inc up to 1.3 crypto/external/bsd/openssh/bin/ssh-keyscan/Makefile up to 1.2 crypto/external/bsd/openssh/bin/sshd/Makefile up to 1.12 crypto/external/bsd/openssh/dist/PROTOCOL up to 1.5 crypto/external/bsd/openssh/dist/PROTOCOL.krl up to 1.1.1.2 crypto/external/bsd/openssh/dist/addrmatch.c up to 1.8 crypto/external/bsd/openssh/dist/atomicio.c up to 1.6 crypto/external/bsd/openssh/dist/auth-bsdauth.c up to 1.4 crypto/external/bsd/openssh/dist/auth-chall.c up to 1.6 crypto/external/bsd/openssh/dist/auth-krb5.c up to 1.7 crypto/external/bsd/openssh/dist/auth-options.c up to 1.9 crypto/external/bsd/openssh/dist/auth-options.h up to 1.6 crypto/external/bsd/openssh/dist/auth-passwd.c up to 1.4 crypto/external/bsd/openssh/dist/auth-rh-rsa.c up to 1.6 crypto/external/bsd/openssh/dist/auth-rhosts.c up to 1.5 crypto/external/bsd/openssh/dist/auth-rsa.c up to 1.10 crypto/external/bsd/openssh/dist/auth.c up to 1.12 crypto/external/bsd/openssh/dist/auth.h up to 1.10 crypto/external/bsd/openssh/dist/auth1.c up to 1.11 crypto/external/bsd/openssh/dist/auth2-chall.c up to 1.7 crypto/external/bsd/openssh/dist/auth2-gss.c up to 1.8 crypto/external/bsd/openssh/dist/auth2-hostbased.c up to 1.7 crypto/external/bsd/openssh/dist/auth2-kbdint.c up to 1.5 crypto/external/bsd/openssh/dist/auth2-krb5.c up to 1.4 crypto/external/bsd/openssh/dist/auth2-none.c up to 1.5 crypto/external/bsd/openssh/dist/auth2-passwd.c up to 1.5 crypto/external/bsd/openssh/dist/auth2-pubkey.c up to 1.11 crypto/external/bsd/openssh/dist/auth2.c up to 1.11 crypto/external/bsd/openssh/dist/authfd.c up to 1.8 crypto/external/bsd/openssh/dist/authfd.h up to 1.5 crypto/external/bsd/openssh/dist/authfile.c up to 1.10 crypto/external/bsd/openssh/dist/authfile.h up to 1.6 crypto/external/bsd/openssh/dist/bufaux.c up to 1.7 crypto/external/bsd/openssh/dist/bufbn.c up to 1.5 crypto/external/bsd/openssh/dist/bufec.c up to 1.5 crypto/external/bsd/openssh/dist/buffer.c up to 1.6 crypto/external/bsd/openssh/dist/buffer.h up to 1.7 crypto/external/bsd/openssh/dist/canohost.c up to 1.8 crypto/external/bsd/openssh/dist/channels.c up to 1.13 crypto/external/bsd/openssh/dist/channels.h up to 1.10 crypto/external/bsd/openssh/dist/cipher-3des1.c up to 1.7 crypto/external/bsd/openssh/dist/cipher-bf1.c up to 1.6 crypto/external/bsd/openssh/dist/cipher.c up to 1.7 crypto/external/bsd/openssh/dist/cipher.h up to 1.7 crypto/external/bsd/openssh/dist/clientloop.c up to 1.13 crypto/external/bsd/openssh/dist/compat.c up to 1.9 crypto/external/bsd/openssh/dist/compat.h up to 1.6 crypto/external/bsd/openssh/dist/deattack.c up to 1.4 crypto/external/bsd/openssh/dist/deattack.h up to 1.4 crypto/external/bsd/openssh/dist/dh.c up to 1.8 crypto/external/bsd/openssh/dist/dh.h up to 1.4 crypto/external/bsd/openssh/dist/dispatch.c up to 1.5 crypto/external/bsd/openssh/dist/dispatch.h up to 1.4 crypto/external/bsd/openssh/dist/dns.c up to 1.11 crypto/external/bsd/openssh/dist/dns.h up to 1.6 crypto/external/bsd/openssh/dist/groupaccess.c up to 1.5 crypto/external/bsd/openssh/dist/gss-genr.c up to 1.7 crypto/external/bsd/openssh/dist/gss-serv-krb5.c up to 1.8 crypto/external/bsd/openssh/dist/gss-serv.c up to 1.7 crypto/external/bsd/openssh/dist/hostfile.c up to 1.7 crypto/external/bsd/openssh/dist/hostfile.h up to 1.7 crypto/external/bsd/openssh/dist/includes.h up to 1.4 crypto/external/bsd/openssh/dist/kex.c up to 1.10 crypto/external/bsd/openssh/dist/kex.h up to 1.9 crypto/external/bsd/openssh/dist/kexdh.c up to 1.4 crypto/external/bsd/openssh/dist/kexdhc.c up to 1.6 crypto/external/bsd/openssh/dist/kexdhs.c up to 1.8 crypto/external/bsd/openssh/dist/kexecdh.c up to 1.5 crypto/external/bsd/openssh/dist/kexecdhc.c up to 1.5 crypto/external/bsd/openssh/dist/kexecdhs.c up to 1.5 crypto/external/bsd/openssh/dist/kexgex.c up to 1.4 crypto/external/bsd/openssh/dist/kexgexc.c up to 1.6 crypto/external/bsd/openssh/dist/kexgexs.c up to 1.8 crypto/external/bsd/openssh/dist/key.c up to 1.16 crypto/external/bsd/openssh/dist/key.h up to 1.9 crypto/external/bsd/openssh/dist/krl.c up to 1.5 crypto/external/bsd/openssh/dist/krl.h up to 1.1.1.2 crypto/external/bsd/openssh/dist/mac.c up to 1.11 crypto/external/bsd/openssh/dist/mac.h up to 1.5 crypto/external/bsd/openssh/dist/match.c up to 1.5 crypto/external/bsd/openssh/dist/misc.c up to 1.10 crypto/external/bsd/openssh/dist/misc.h up to 1.9 plus patch crypto/external/bsd/openssh/dist/moduli.c up to 1.8 crypto/external/bsd/openssh/dist/monitor.c up to 1.14 crypto/external/bsd/openssh/dist/monitor.h up to 1.7 crypto/external/bsd/openssh/dist/monitor_fdpass.c up to 1.5 crypto/external/bsd/openssh/dist/monitor_mm.c up to 1.6 crypto/external/bsd/openssh/dist/monitor_mm.h up to 1.4 crypto/external/bsd/openssh/dist/monitor_wrap.c up to 1.11 crypto/external/bsd/openssh/dist/monitor_wrap.h up to 1.8 crypto/external/bsd/openssh/dist/msg.c up to 1.4 crypto/external/bsd/openssh/dist/msg.h up to 1.4 crypto/external/bsd/openssh/dist/mux.c up to 1.11 crypto/external/bsd/openssh/dist/myproposal.h up to 1.10 crypto/external/bsd/openssh/dist/namespace.h up to 1.5 crypto/external/bsd/openssh/dist/packet.c up to 1.18 crypto/external/bsd/openssh/dist/packet.h up to 1.11 crypto/external/bsd/openssh/dist/pathnames.h up to 1.9 crypto/external/bsd/openssh/dist/pkcs11.h up to 1.4 crypto/external/bsd/openssh/dist/progressmeter.c up to 1.7 crypto/external/bsd/openssh/dist/progressmeter.h up to 1.4 crypto/external/bsd/openssh/dist/reallocarray.c new crypto/external/bsd/openssh/dist/readconf.c up to 1.13 crypto/external/bsd/openssh/dist/readconf.h up to 1.12 crypto/external/bsd/openssh/dist/readpass.c up to 1.6 crypto/external/bsd/openssh/dist/roaming_client.c up to 1.7 crypto/external/bsd/openssh/dist/roaming_common.c up to 1.9 crypto/external/bsd/openssh/dist/roaming_dummy.c up to 1.4 crypto/external/bsd/openssh/dist/rsa.c up to 1.5 crypto/external/bsd/openssh/dist/rsa.h up to 1.4 crypto/external/bsd/openssh/dist/sandbox-systrace.c up to 1.1.1.5 crypto/external/bsd/openssh/dist/scp.1 up to 1.9 crypto/external/bsd/openssh/dist/scp.c up to 1.11 crypto/external/bsd/openssh/dist/servconf.c up to 1.17 crypto/external/bsd/openssh/dist/servconf.h up to 1.11 crypto/external/bsd/openssh/dist/serverloop.c up to 1.12 crypto/external/bsd/openssh/dist/session.c up to 1.14 crypto/external/bsd/openssh/dist/session.h up to 1.4 crypto/external/bsd/openssh/dist/sftp-client.c up to 1.13 crypto/external/bsd/openssh/dist/sftp-client.h up to 1.7 crypto/external/bsd/openssh/dist/sftp-common.c up to 1.7 crypto/external/bsd/openssh/dist/sftp-common.h up to 1.5 crypto/external/bsd/openssh/dist/sftp-glob.c up to 1.8 crypto/external/bsd/openssh/dist/sftp-server.8 up to 1.9 crypto/external/bsd/openssh/dist/sftp-server.c up to 1.11 crypto/external/bsd/openssh/dist/sftp.1 up to 1.11 crypto/external/bsd/openssh/dist/sftp.c up to 1.15 crypto/external/bsd/openssh/dist/ssh-add.1 up to 1.9 crypto/external/bsd/openssh/dist/ssh-add.c up to 1.10 crypto/external/bsd/openssh/dist/ssh-agent.1 up to 1.8 crypto/external/bsd/openssh/dist/ssh-agent.c up to 1.14 crypto/external/bsd/openssh/dist/ssh-dss.c up to 1.7 crypto/external/bsd/openssh/dist/ssh-ecdsa.c up to 1.6 crypto/external/bsd/openssh/dist/ssh-gss.h up to 1.5 crypto/external/bsd/openssh/dist/ssh-keygen.1 up to 1.13 crypto/external/bsd/openssh/dist/ssh-keygen.c up to 1.16 crypto/external/bsd/openssh/dist/ssh-keyscan.1 up to 1.10 crypto/external/bsd/openssh/dist/ssh-keyscan.c up to 1.13 crypto/external/bsd/openssh/dist/ssh-keysign.8 up to 1.9 crypto/external/bsd/openssh/dist/ssh-keysign.c up to 1.8 crypto/external/bsd/openssh/dist/ssh-pkcs11-client.c up to 1.6 crypto/external/bsd/openssh/dist/ssh-pkcs11-helper.c up to 1.8 crypto/external/bsd/openssh/dist/ssh-pkcs11.c up to 1.7 crypto/external/bsd/openssh/dist/ssh-pkcs11.h up to 1.4 crypto/external/bsd/openssh/dist/ssh-rsa.c up to 1.7 crypto/external/bsd/openssh/dist/ssh.1 up to 1.14 crypto/external/bsd/openssh/dist/ssh.c up to 1.16 crypto/external/bsd/openssh/dist/ssh2.h up to 1.6 crypto/external/bsd/openssh/dist/ssh_config up to 1.8 crypto/external/bsd/openssh/dist/ssh_config.5 up to 1.13 crypto/external/bsd/openssh/dist/sshconnect.c up to 1.11 crypto/external/bsd/openssh/dist/sshconnect.h up to 1.6 crypto/external/bsd/openssh/dist/sshconnect1.c up to 1.6 crypto/external/bsd/openssh/dist/sshconnect2.c up to 1.19 crypto/external/bsd/openssh/dist/sshd.8 up to 1.13 crypto/external/bsd/openssh/dist/sshd.c up to 1.18 crypto/external/bsd/openssh/dist/sshd_config up to 1.13 crypto/external/bsd/openssh/dist/sshd_config.5 up to 1.17 crypto/external/bsd/openssh/dist/sshlogin.c up to 1.6 crypto/external/bsd/openssh/dist/sshpty.c up to 1.4 crypto/external/bsd/openssh/dist/uidswap.c up to 1.4 crypto/external/bsd/openssh/dist/umac.c up to 1.9 crypto/external/bsd/openssh/dist/version.h up to 1.14 crypto/external/bsd/openssh/dist/xmalloc.c up to 1.5 crypto/external/bsd/openssh/lib/Makefile up to 1.17 plus patch crypto/external/bsd/openssh/lib/shlib_version up to 1.13 distrib/sets/lists/base/ad.aarch64 patch distrib/sets/lists/base/ad.arm patch distrib/sets/lists/base/ad.mips patch distrib/sets/lists/base/ad.powerpc patch distrib/sets/lists/base/md.amd64 patch distrib/sets/lists/base/md.sparc64 patch distrib/sets/lists/base/mi patch distrib/sets/lists/base/shl.mi patch distrib/sets/lists/comp/ad.aarch64 patch distrib/sets/lists/comp/ad.arm patch distrib/sets/lists/comp/ad.mips patch distrib/sets/lists/comp/ad.powerpc patch distrib/sets/lists/comp/md.amd64 patch distrib/sets/lists/comp/md.sparc64 patch distrib/sets/lists/comp/mi patch distrib/sets/lists/comp/shl.mi patch distrib/sets/lists/debug/ad.aarch64 patch distrib/sets/lists/debug/ad.arm patch distrib/sets/lists/debug/ad.mips patch distrib/sets/lists/debug/ad.powerpc patch distrib/sets/lists/debug/md.amd64 patch distrib/sets/lists/debug/md.sparc64 patch distrib/sets/lists/debug/shl.mi patch distrib/sets/lists/etc/mi patch distrib/sets/lists/man/mi patch etc/defaults/rc.conf 1.130 etc/mtree/NetBSD.dist.base 1.142 external/bsd/Makefile up to 1.48 external/bsd/blacklist/bin/Makefile up to 1.11 plus patch external/bsd/blacklist/bin/blacklistctl.8 up to 1.6 external/bsd/blacklist/bin/blacklistctl.c up to 1.17 external/bsd/blacklist/bin/blacklistd.8 up to 1.10 external/bsd/blacklist/bin/blacklistd.c up to 1.32 external/bsd/blacklist/bin/blacklistd.conf.5 up to 1.2 external/bsd/blacklist/bin/conf.c up to 1.18 external/bsd/blacklist/bin/conf.h up to 1.6 external/bsd/blacklist/bin/internal.c up to 1.5 external/bsd/blacklist/bin/internal.h up to 1.12 external/bsd/blacklist/bin/run.c up to 1.12 external/bsd/blacklist/bin/run.h up to 1.5 external/bsd/blacklist/bin/state.c up to 1.15 external/bsd/blacklist/bin/state.h up to 1.5 external/bsd/blacklist/bin/support.c up to 1.6 external/bsd/blacklist/bin/support.h up to 1.5 external/bsd/blacklist/etc/rc.d/Makefile up to 1.1 external/bsd/blacklist/etc/rc.d/blacklistd up to 1.1 external/bsd/blacklist/etc/Makefile up to 1.3 external/bsd/blacklist/etc/blacklistd.conf up to 1.3 external/bsd/blacklist/etc/npf.conf up to 1.1 external/bsd/blacklist/Makefile up to 1.2 external/bsd/blacklist/Makefile.inc up to 1.3 external/bsd/blacklist/README up to 1.7 external/bsd/blacklist/TODO up to 1.7 external/bsd/blacklist/diff/ftpd.diff up to 1.1 external/bsd/blacklist/diff/named.diff up to 1.6 external/bsd/blacklist/diff/ssh.diff up to 1.6 external/bsd/blacklist/include/Makefile up to 1.1 external/bsd/blacklist/include/bl.h up to 1.12 external/bsd/blacklist/include/blacklist.h up to 1.3 external/bsd/blacklist/include/config.h new external/bsd/blacklist/lib/Makefile up to 1.3 external/bsd/blacklist/lib/bl.c up to 1.24 external/bsd/blacklist/lib/blacklist.c up to 1.5 external/bsd/blacklist/lib/libblacklist.3 up to 1.3 external/bsd/blacklist/lib/shlib_version up to 1.1 external/bsd/blacklist/libexec/Makefile up to 1.1 external/bsd/blacklist/libexec/blacklistd-helper up to 1.4 external/bsd/blacklist/port/m4/.cvsignore up to 1.1 external/bsd/blacklist/port/Makefile.am up to 1.4 external/bsd/blacklist/port/_strtoi.h up to 1.1 external/bsd/blacklist/port/clock_gettime.c up to 1.2 external/bsd/blacklist/port/configure.ac up to 1.7 external/bsd/blacklist/port/fgetln.c up to 1.1 external/bsd/blacklist/port/fparseln.c up to 1.1 external/bsd/blacklist/port/getprogname.c up to 1.4 external/bsd/blacklist/port/pidfile.c up to 1.1 external/bsd/blacklist/port/popenve.c up to 1.2 external/bsd/blacklist/port/port.h up to 1.6 external/bsd/blacklist/port/sockaddr_snprintf.c up to 1.9 external/bsd/blacklist/port/strlcat.c up to 1.2 external/bsd/blacklist/port/strlcpy.c up to 1.2 external/bsd/blacklist/port/strtoi.c up to 1.3 external/bsd/blacklist/test/Makefile up to 1.2 external/bsd/blacklist/test/cltest.c up to 1.6 external/bsd/blacklist/test/srvtest.c up to 1.9 lib/libpam/modules/pam_ssh/pam_ssh.c up to 1.23 libexec/ftpd/pfilter.c up to 1.1 libexec/ftpd/pfilter.h up to 1.1 libexec/ftpd/Makefile up to 1.64 libexec/ftpd/ftpd.c up to 1.201 Add blacklistd(8), a daemon to block and release network ports on demand to mitigate abuse, and related changes to system daemons to support it. [christos, ticket #711]
Merge conflicts
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
merge openssh-6.7
Changes since OpenSSH 6.6
=========================
Potentially-incompatible changes
* sshd(8): The default set of ciphers and MACs has been altered to
remove unsafe algorithms. In particular, CBC ciphers and arcfour*
are disabled by default.
The full set of algorithms remains available if configured
explicitly via the Ciphers and MACs sshd_config options.
* sshd(8): Support for tcpwrappers/libwrap has been removed.
* OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections
using the curve25519-sha256@libssh.org KEX exchange method to fail
when connecting with something that implements the specification
correctly. OpenSSH 6.7 disables this KEX method when speaking to
one of the affected versions.
New Features
* Major internal refactoring to begin to make part of OpenSSH usable
as a library. So far the wire parsing, key handling and KRL code
has been refactored. Please note that we do not consider the API
stable yet, nor do we offer the library in separable form.
* ssh(1), sshd(8): Add support for Unix domain socket forwarding.
A remote TCP port may be forwarded to a local Unix domain socket
and vice versa or both ends may be a Unix domain socket.
* ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for
ED25519 key types.
* sftp(1): Allow resumption of interrupted uploads.
* ssh(1): When rekeying, skip file/DNS lookups of the hostkey if it
is the same as the one sent during initial key exchange; bz#2154
* sshd(8): Allow explicit ::1 and 127.0.0.1 forwarding bind
addresses when GatewayPorts=no; allows client to choose address
family; bz#2222
* sshd(8): Add a sshd_config PermitUserRC option to control whether
~/.ssh/rc is executed, mirroring the no-user-rc authorized_keys
option; bz#2160
* ssh(1): Add a %C escape sequence for LocalCommand and ControlPath
that expands to a unique identifer based on a hash of the tuple of
(local host, remote user, hostname, port). Helps avoid exceeding
miserly pathname limits for Unix domain sockets in multiplexing
control paths; bz#2220
* sshd(8): Make the "Too many authentication failures" message
include the user, source address, port and protocol in a format
similar to the authentication success / failure messages; bz#2199
* Added unit and fuzz tests for refactored code. These are run
automatically in portable OpenSSH via the "make tests" target.
Bugfixes
* sshd(8): Fix remote forwarding with the same listen port but
different listen address.
* ssh(1): Fix inverted test that caused PKCS#11 keys that were
explicitly listed in ssh_config or on the commandline not to be
preferred.
* ssh-keygen(1): Fix bug in KRL generation: multiple consecutive
revoked certificate serial number ranges could be serialised to an
invalid format. Readers of a broken KRL caused by this bug will
fail closed, so no should-have-been-revoked key will be accepted.
* ssh(1): Reflect stdio-forward ("ssh -W host:port ...") failures in
exit status. Previously we were always returning 0; bz#2255
* ssh(1), ssh-keygen(1): Make Ed25519 keys' title fit properly in the
randomart border; bz#2247
* ssh-agent(1): Only cleanup agent socket in the main agent process
and not in any subprocesses it may have started (e.g. forked
askpass). Fixes agent sockets being zapped when askpass processes
fatal(); bz#2236
* ssh-add(1): Make stdout line-buffered; saves partial output getting
lost when ssh-add fatal()s part-way through (e.g. when listing keys
from an agent that supports key types that ssh-add doesn't);
bz#2234
* ssh-keygen(1): When hashing or removing hosts, don't choke on
@revoked markers and don't remove @cert-authority markers; bz#2241
* ssh(1): Don't fatal when hostname canonicalisation fails and a
ProxyCommand is in use; continue and allow the ProxyCommand to
connect anyway (e.g. to a host with a name outside the DNS behind
a bastion)
* scp(1): When copying local->remote fails during read, don't send
uninitialised heap to the remote end.
* sftp(1): Fix fatal "el_insertstr failed" errors when tab-completing
filenames with a single quote char somewhere in the string;
bz#2238
* ssh-keyscan(1): Scan for Ed25519 keys by default.
* ssh(1): When using VerifyHostKeyDNS with a DNSSEC resolver, down-
convert any certificate keys to plain keys and attempt SSHFP
resolution. Prevents a server from skipping SSHFP lookup and
forcing a new-hostkey dialog by offering only certificate keys.
* sshd(8): Avoid crash at exit via NULL pointer reference; bz#2225
* Fix some strict-alignment errors.
Portable OpenSSH
* Portable OpenSSH now supports building against libressl-portable.
* Portable OpenSSH now requires openssl 0.9.8f or greater. Older
versions are no longer supported.
* In the OpenSSL version check, allow fix version upgrades (but not
downgrades. Debian bug #748150.
* sshd(8): On Cygwin, determine privilege separation user at runtime,
since it may need to be a domain account.
* sshd(8): Don't attempt to use vhangup on Linux. It doesn't work for
non-root users, and for them it just messes up the tty settings.
* Use CLOCK_BOOTTIME in preference to CLOCK_MONOTONIC when it is
available. It considers time spent suspended, thereby ensuring
timeouts (e.g. for expiring agent keys) fire correctly. bz#2228
* Add support for ed25519 to opensshd.init init script.
* sftp-server(8): On platforms that support it, use prctl() to
prevent sftp-server from accessing /proc/self/{mem,maps}
Changes since OpenSSH 6.5
=========================
This is primarily a bugfix release.
Security:
* sshd(8): when using environment passing with a sshd_config(5)
AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be
tricked into accepting any enviornment variable that contains the
characters before the wildcard character.
New / changed features:
* ssh(1), sshd(8): this release removes the J-PAKE authentication code.
This code was experimental, never enabled and had been unmaintained
for some time.
* ssh(1): when processing Match blocks, skip 'exec' clauses other clauses
predicates failed to match.
* ssh(1): if hostname canonicalisation is enabled and results in the
destination hostname being changed, then re-parse ssh_config(5) files
using the new destination hostname. This gives 'Host' and 'Match'
directives that use the expanded hostname a chance to be applied.
Bugfixes:
* ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in
ssh -W. bz#2200, debian#738692
* sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace
sandbox modes, as it is reachable if the connection is terminated
during the pre-auth phase.
* ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum
parsing. Minimum key length checks render this bug unexploitable to
compromise SSH 1 sessions.
* sshd_config(5): clarify behaviour of a keyword that appears in
multiple matching Match blocks. bz#2184
* ssh(1): avoid unnecessary hostname lookups when canonicalisation is
disabled. bz#2205
* sshd(8): avoid sandbox violation crashes in GSSAPI code by caching
the supported list of GSSAPI mechanism OIDs before entering the
sandbox. bz#2107
* ssh(1): fix possible crashes in SOCKS4 parsing caused by assumption
that the SOCKS username is nul-terminated.
* ssh(1): fix regression for UsePrivilegedPort=yes when BindAddress is
not specified.
* ssh(1), sshd(8): fix memory leak in ECDSA signature verification.
* ssh(1): fix matching of 'Host' directives in ssh_config(5) files
to be case-insensitive again (regression in 6.5).
Portable OpenSSH:
* sshd(8): don't fatal if the FreeBSD Capsicum is offered by the
system headers and libc but is not supported by the kernel.
* Fix build using the HP-UX compiler.
Changes since OpenSSH 6.4
=========================
This is a feature-focused release.
New features:
* ssh(1), sshd(8): Add support for key exchange using elliptic-curve
Diffie Hellman in Daniel Bernstein's Curve25519. This key exchange
method is the default when both the client and server support it.
* ssh(1), sshd(8): Add support for Ed25519 as a public key type.
Ed25519 is a elliptic curve signature scheme that offers
better security than ECDSA and DSA and good performance. It may be
used for both user and host keys.
* Add a new private key format that uses a bcrypt KDF to better
protect keys at rest. This format is used unconditionally for
Ed25519 keys, but may be requested when generating or saving
existing keys of other types via the -o ssh-keygen(1) option.
We intend to make the new format the default in the near future.
Details of the new format are in the PROTOCOL.key file.
* ssh(1), sshd(8): Add a new transport cipher
"chacha20-poly1305@openssh.com" that combines Daniel Bernstein's
ChaCha20 stream cipher and Poly1305 MAC to build an authenticated
encryption mode. Details are in the PROTOCOL.chacha20poly1305 file.
* ssh(1), sshd(8): Refuse RSA keys from old proprietary clients and
servers that use the obsolete RSA+MD5 signature scheme. It will
still be possible to connect with these clients/servers but only
DSA keys will be accepted, and OpenSSH will refuse connection
entirely in a future release.
* ssh(1), sshd(8): Refuse old proprietary clients and servers that
use a weaker key exchange hash calculation.
* ssh(1): Increase the size of the Diffie-Hellman groups requested
for each symmetric key size. New values from NIST Special
Publication 800-57 with the upper limit specified by RFC4419.
* ssh(1), ssh-agent(1): Support PKCS#11 tokens that only provide
X.509 certs instead of raw public keys (requested as bz#1908).
* ssh(1): Add a ssh_config(5) "Match" keyword that allows
conditional configuration to be applied by matching on hostname,
user and result of arbitrary commands.
* ssh(1): Add support for client-side hostname canonicalisation
using a set of DNS suffixes and rules in ssh_config(5). This
allows unqualified names to be canonicalised to fully-qualified
domain names to eliminate ambiguity when looking up keys in
known_hosts or checking host certificate names.
* sftp-server(8): Add the ability to whitelist and/or blacklist sftp
protocol requests by name.
* sftp-server(8): Add a sftp "fsync@openssh.com" to support calling
fsync(2) on an open file handle.
* sshd(8): Add a ssh_config(5) PermitTTY to disallow TTY allocation,
mirroring the longstanding no-pty authorized_keys option.
* ssh(1): Add a ssh_config ProxyUseFDPass option that supports the
use of ProxyCommands that establish a connection and then pass a
connected file descriptor back to ssh(1). This allows the
ProxyCommand to exit rather than staying around to transfer data.
Bugfixes:
* ssh(1), sshd(8): Fix potential stack exhaustion caused by nested
certificates.
* ssh(1): bz#1211: make BindAddress work with UsePrivilegedPort.
* sftp(1): bz#2137: fix the progress meter for resumed transfer.
* ssh-add(1): bz#2187: do not request smartcard PIN when removing
keys from ssh-agent.
* sshd(8): bz#2139: fix re-exec fallback when original sshd binary
cannot be executed.
* ssh-keygen(1): Make relative-specified certificate expiry times
relative to current time and not the validity start time.
* sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match block.
* sftp(1): bz#2129: symlinking a file would incorrectly canonicalise
the target path.
* ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11 agent
helper executable.
* sshd(8): Improve logging of sessions to include the user name,
remote host and port, the session type (shell, command, etc.) and
allocated TTY (if any).
* sshd(8): bz#1297: tell the client (via a debug message) when
their preferred listen address has been overridden by the
server's GatewayPorts setting.
* sshd(8): bz#2162: include report port in bad protocol banner
message.
* sftp(1): bz#2163: fix memory leak in error path in do_readdir().
* sftp(1): bz#2171: don't leak file descriptor on error.
* sshd(8): Include the local address and port in "Connection from
..." message (only shown at loglevel>=verbose).
Portable OpenSSH:
* Please note that this is the last version of Portable OpenSSH that
will support versions of OpenSSL prior to 0.9.6. Support (i.e.
SSH_OLD_EVP) will be removed following the 6.5p1 release.
* Portable OpenSSH will attempt compile and link as a Position
Independent Executable on Linux, OS X and OpenBSD on recent gcc-
like compilers. Other platforms and older/other compilers may
request this using the --with-pie configure flag.
* A number of other toolchain-related hardening options are used
automatically if available, including -ftrapv to abort on signed
integer overflow and options to write-protect dynamic linking
information. The use of these options may be disabled using the
--without-hardening configure flag.
* If the toolchain supports it, one of the -fstack-protector-strong,
-fstack-protector-all or -fstack-protector compilation flag are
used to add guards to mitigate attacks based on stack overflows.
The use of these options may be disabled using the
--without-stackprotect configure option.
* sshd(8): Add support for pre-authentication sandboxing using the
Capsicum API introduced in FreeBSD 10.
* Switch to a ChaCha20-based arc4random() PRNG for platforms that do
not provide their own.
* sshd(8): bz#2156: restore Linux oom_adj setting when handling
SIGHUP to maintain behaviour over retart.
* sshd(8): bz#2032: use local username in krb5_kuserok check rather
than full client name which may be of form user@REALM.
* ssh(1), sshd(8): Test for both the presence of ECC NID numbers in
OpenSSL and that they actually work. Fedora (at least) has
NID_secp521r1 that doesn't work.
* bz#2173: use pkg-config --libs to include correct -L location for
libedit.
Rebase to HEAD as of a few days ago.
sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
merge conflicts.
Import new openssh to address Changes since OpenSSH 6.3 ========================= This release fixes a security bug: * sshd(8): fix a memory corruption problem triggered during rekeying when an AES-GCM cipher is selected. Full details of the vulnerability are available at: http://www.openssh.com/txt/gcmrekey.adv Checksums: ========== - SHA1 (openssh-6.4.tar.gz) = 4caf1a50eb3a3da821c16298c4aaa576fe24210c - SHA1 (openssh-6.4p1.tar.gz) = cf5fe0eb118d7e4f9296fbc5d6884965885fc55d Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
sync with head.
merge OpenSSH 6.0 Features: * ssh-keygen(1): Add optional checkpoints for moduli screening * ssh-add(1): new -k option to load plain keys (skipping certificates) * sshd(8): Add wildcard support to PermitOpen, allowing things like "PermitOpen localhost:*". bz #1857 * ssh(1): support for cancelling local and remote port forwards via the multiplex socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request the cancellation of the specified forwardings * support cancellation of local/dynamic forwardings from ~C commandline Bugfixes: * ssh(1): ensure that $DISPLAY contains only valid characters before using it to extract xauth data so that it can't be used to play local shell metacharacter games. * ssh(1): unbreak remote portforwarding with dynamic allocated listen ports * scp(1): uppress adding '--' to remote commandlines when the first argument does not start with '-'. saves breakage on some difficult-to-upgrade embedded/router platforms * ssh(1)/sshd(8): fix typo in IPQoS parsing: there is no "AF14" class, but there is an "AF21" class * ssh(1)/sshd(8): do not permit SSH2_MSG_SERVICE_REQUEST/ACCEPT during rekeying * ssh(1): skip attempting to create ~/.ssh when -F is passed * sshd(8): unbreak stdio forwarding when ControlPersist is in use; bz#1943 * sshd(1): send tty break to pty master instead of (probably already closed) slave side; bz#1859 * sftp(1): silence error spam for "ls */foo" in directory with files; bz#1683 * Fixed a number of memory and file descriptor leaks
from ftp.openbsd.org
- Merge conflicts - WARNS=5
from ftp.openbsd.org
Resolve conflicts
Imported openssh-5.6
Merge in our changes: - conditionalize login_cap - conditionalize bsd_auth - bring in pam from portable - restore krb5, krb4, afs, skey - bring in hpn patches, disable mt aes cipher, keep speedups and cipher none - add ignore root rhosts option - fix ctype macro arguments - umac is broken, disable it - better ~homedir handling - netbsd style tunnels - urandom, xhome, chrootdir, rescuedir NetBSD handling - utmp/utmpx handling - handle tty posix_vdisable properly - handle setuid and unsetuid the posix way instead of setresuid() - add all missing functions - add new moduli - add build glue
import 5.2 from ftp.openbsd.org
Initial revision