[BACK]Return to build.sh CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Annotation of src/build.sh, Revision 1.327.2.4

1.67      thorpej     1: #! /usr/bin/env sh
1.327.2.4! martin      2: #      $NetBSD: build.sh,v 1.334 2020/03/28 20:13:13 jmcneill Exp $
1.84      lukem       3: #
1.248     apb         4: # Copyright (c) 2001-2011 The NetBSD Foundation, Inc.
1.84      lukem       5: # All rights reserved.
                      6: #
                      7: # This code is derived from software contributed to The NetBSD Foundation
                      8: # by Todd Vierling and Luke Mewburn.
                      9: #
                     10: # Redistribution and use in source and binary forms, with or without
                     11: # modification, are permitted provided that the following conditions
                     12: # are met:
                     13: # 1. Redistributions of source code must retain the above copyright
                     14: #    notice, this list of conditions and the following disclaimer.
                     15: # 2. Redistributions in binary form must reproduce the above copyright
                     16: #    notice, this list of conditions and the following disclaimer in the
                     17: #    documentation and/or other materials provided with the distribution.
                     18: #
                     19: # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
                     20: # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
                     21: # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
                     22: # PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
                     23: # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
                     24: # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
                     25: # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
                     26: # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
                     27: # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
                     28: # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
                     29: # POSSIBILITY OF SUCH DAMAGE.
                     30: #
1.1       tv         31: #
1.249     apb        32: # Top level build wrapper, to build or cross-build NetBSD.
1.1       tv         33: #
1.249     apb        34:
                     35: #
                     36: # {{{ Begin shell feature tests.
                     37: #
                     38: # We try to determine whether or not this script is being run under
                     39: # a shell that supports the features that we use.  If not, we try to
                     40: # re-exec the script under another shell.  If we can't find another
                     41: # suitable shell, then we print a message and exit.
                     42: #
                     43:
                     44: errmsg=''              # error message, if not empty
                     45: shelltest=false                # if true, exit after testing the shell
                     46: re_exec_allowed=true   # if true, we may exec under another shell
                     47:
                     48: # Parse special command line options in $1.  These special options are
                     49: # for internal use only, are not documented, and are not valid anywhere
                     50: # other than $1.
                     51: case "$1" in
                     52: "--shelltest")
                     53:     shelltest=true
                     54:     re_exec_allowed=false
                     55:     shift
                     56:     ;;
                     57: "--no-re-exec")
                     58:     re_exec_allowed=false
                     59:     shift
                     60:     ;;
                     61: esac
                     62:
                     63: # Solaris /bin/sh, and other SVR4 shells, do not support "!".
                     64: # This is the first feature that we test, because subsequent
                     65: # tests use "!".
                     66: #
                     67: if test -z "$errmsg"; then
                     68:     if ( eval '! false' ) >/dev/null 2>&1 ; then
                     69:        :
                     70:     else
                     71:        errmsg='Shell does not support "!".'
                     72:     fi
                     73: fi
                     74:
                     75: # Does the shell support functions?
                     76: #
                     77: if test -z "$errmsg"; then
                     78:     if ! (
                     79:        eval 'somefunction() { : ; }'
                     80:        ) >/dev/null 2>&1
                     81:     then
                     82:        errmsg='Shell does not support functions.'
                     83:     fi
                     84: fi
                     85:
                     86: # Does the shell support the "local" keyword for variables in functions?
                     87: #
                     88: # Local variables are not required by SUSv3, but some scripts run during
                     89: # the NetBSD build use them.
                     90: #
                     91: # ksh93 fails this test; it uses an incompatible syntax involving the
                     92: # keywords 'function' and 'typeset'.
                     93: #
                     94: if test -z "$errmsg"; then
                     95:     if ! (
                     96:        eval 'f() { local v=2; }; v=1; f && test x"$v" = x"1"'
                     97:        ) >/dev/null 2>&1
                     98:     then
                     99:        errmsg='Shell does not support the "local" keyword in functions.'
                    100:     fi
                    101: fi
                    102:
                    103: # Does the shell support ${var%suffix}, ${var#prefix}, and their variants?
                    104: #
                    105: # We don't bother testing for ${var+value}, ${var-value}, or their variants,
                    106: # since shells without those are sure to fail other tests too.
                    107: #
                    108: if test -z "$errmsg"; then
                    109:     if ! (
                    110:        eval 'var=a/b/c ;
                    111:              test x"${var#*/};${var##*/};${var%/*};${var%%/*}" = \
                    112:                   x"b/c;c;a/b;a" ;'
                    113:        ) >/dev/null 2>&1
                    114:     then
                    115:        errmsg='Shell does not support "${var%suffix}" or "${var#prefix}".'
                    116:     fi
                    117: fi
                    118:
                    119: # Does the shell support IFS?
                    120: #
                    121: # zsh in normal mode (as opposed to "emulate sh" mode) fails this test.
                    122: #
                    123: if test -z "$errmsg"; then
                    124:     if ! (
                    125:        eval 'IFS=: ; v=":a b::c" ; set -- $v ; IFS=+ ;
                    126:                test x"$#;$1,$2,$3,$4;$*" = x"4;,a b,,c;+a b++c"'
                    127:        ) >/dev/null 2>&1
                    128:     then
                    129:        errmsg='Shell does not support IFS word splitting.'
                    130:     fi
                    131: fi
                    132:
                    133: # Does the shell support ${1+"$@"}?
                    134: #
                    135: # Some versions of zsh fail this test, even in "emulate sh" mode.
                    136: #
                    137: if test -z "$errmsg"; then
                    138:     if ! (
                    139:        eval 'set -- "a a a" "b b b"; set -- ${1+"$@"};
                    140:              test x"$#;$1;$2" = x"2;a a a;b b b";'
                    141:        ) >/dev/null 2>&1
                    142:     then
                    143:        errmsg='Shell does not support ${1+"$@"}.'
                    144:     fi
                    145: fi
                    146:
                    147: # Does the shell support $(...) command substitution?
                    148: #
                    149: if test -z "$errmsg"; then
                    150:     if ! (
                    151:        eval 'var=$(echo abc); test x"$var" = x"abc"'
                    152:        ) >/dev/null 2>&1
                    153:     then
                    154:        errmsg='Shell does not support "$(...)" command substitution.'
                    155:     fi
                    156: fi
                    157:
                    158: # Does the shell support $(...) command substitution with
                    159: # unbalanced parentheses?
                    160: #
                    161: # Some shells known to fail this test are:  NetBSD /bin/ksh (as of 2009-12),
                    162: # bash-3.1, pdksh-5.2.14, zsh-4.2.7 in "emulate sh" mode.
                    163: #
                    164: if test -z "$errmsg"; then
                    165:     if ! (
                    166:        eval 'var=$(case x in x) echo abc;; esac); test x"$var" = x"abc"'
                    167:        ) >/dev/null 2>&1
                    168:     then
                    169:        # XXX: This test is ignored because so many shells fail it; instead,
                    170:        #      the NetBSD build avoids using the problematic construct.
                    171:        : ignore 'Shell does not support "$(...)" with unbalanced ")".'
                    172:     fi
                    173: fi
                    174:
                    175: # Does the shell support getopts or getopt?
                    176: #
                    177: if test -z "$errmsg"; then
                    178:     if ! (
                    179:        eval 'type getopts || type getopt'
                    180:        ) >/dev/null 2>&1
                    181:     then
                    182:        errmsg='Shell does not support getopts or getopt.'
                    183:     fi
                    184: fi
                    185:
                    186: #
1.251     mbalmer   187: # If shelltest is true, exit now, reporting whether or not the shell is good.
1.249     apb       188: #
                    189: if $shelltest; then
                    190:     if test -n "$errmsg"; then
                    191:        echo >&2 "$0: $errmsg"
                    192:        exit 1
                    193:     else
                    194:        exit 0
                    195:     fi
                    196: fi
                    197:
                    198: #
                    199: # If the shell was bad, try to exec a better shell, or report an error.
                    200: #
                    201: # Loops are broken by passing an extra "--no-re-exec" flag to the new
                    202: # instance of this script.
                    203: #
                    204: if test -n "$errmsg"; then
                    205:     if $re_exec_allowed; then
                    206:        for othershell in \
1.298     apb       207:            "${HOST_SH}" /usr/xpg4/bin/sh ksh ksh88 mksh pdksh dash bash
1.249     apb       208:            # NOTE: some shells known not to work are:
                    209:            # any shell using csh syntax;
                    210:            # Solaris /bin/sh (missing many modern features);
                    211:            # ksh93 (incompatible syntax for local variables);
                    212:            # zsh (many differences, unless run in compatibility mode).
                    213:        do
                    214:            test -n "$othershell" || continue
                    215:            if eval 'type "$othershell"' >/dev/null 2>&1 \
                    216:                && "$othershell" "$0" --shelltest >/dev/null 2>&1
                    217:            then
                    218:                cat <<EOF
                    219: $0: $errmsg
                    220: $0: Retrying under $othershell
                    221: EOF
                    222:                HOST_SH="$othershell"
                    223:                export HOST_SH
                    224:                exec $othershell "$0" --no-re-exec "$@" # avoid ${1+"$@"}
                    225:            fi
                    226:            # If HOST_SH was set, but failed the test above,
                    227:            # then give up without trying any other shells.
                    228:            test x"${othershell}" = x"${HOST_SH}" && break
                    229:        done
                    230:     fi
                    231:
                    232:     #
                    233:     # If we get here, then the shell is bad, and we either could not
                    234:     # find a replacement, or were not allowed to try a replacement.
                    235:     #
                    236:     cat <<EOF
                    237: $0: $errmsg
                    238:
                    239: The NetBSD build system requires a shell that supports modern POSIX
                    240: features, as well as the "local" keyword in functions (which is a
                    241: widely-implemented but non-standardised feature).
                    242:
                    243: Please re-run this script under a suitable shell.  For example:
                    244:
                    245:        /path/to/suitable/shell $0 ...
                    246:
                    247: The above command will usually enable build.sh to automatically set
                    248: HOST_SH=/path/to/suitable/shell, but if that fails, then you may also
                    249: need to explicitly set the HOST_SH environment variable, as follows:
                    250:
                    251:        HOST_SH=/path/to/suitable/shell
                    252:        export HOST_SH
                    253:        \${HOST_SH} $0 ...
                    254: EOF
                    255:     exit 1
                    256: fi
                    257:
                    258: #
                    259: # }}} End shell feature tests.
1.67      thorpej   260: #
1.1       tv        261:
1.84      lukem     262: progname=${0##*/}
                    263: toppid=$$
1.98      lukem     264: results=/dev/null
1.200     apb       265: tab='  '
1.258     apb       266: nl='
                    267: '
1.82      lukem     268: trap "exit 1" 1 2 3 15
1.84      lukem     269:
1.79      lukem     270: bomb()
                    271: {
1.82      lukem     272:        cat >&2 <<ERRORMESSAGE
                    273:
                    274: ERROR: $@
                    275: *** BUILD ABORTED ***
                    276: ERRORMESSAGE
1.98      lukem     277:        kill ${toppid}          # in case we were invoked from a subshell
1.1       tv        278:        exit 1
                    279: }
1.78      lukem     280:
1.285     apb       281: # Quote args to make them safe in the shell.
                    282: # Usage: quotedlist="$(shell_quote args...)"
                    283: #
                    284: # After building up a quoted list, use it by evaling it inside
                    285: # double quotes, like this:
                    286: #    eval "set -- $quotedlist"
                    287: # or like this:
                    288: #    eval "\$command $quotedlist \$filename"
1.289     apb       289: #
1.285     apb       290: shell_quote()
1.289     apb       291: {(
1.285     apb       292:        local result=''
1.289     apb       293:        local arg qarg
                    294:        LC_COLLATE=C ; export LC_COLLATE # so [a-zA-Z0-9] works in ASCII
1.285     apb       295:        for arg in "$@" ; do
1.289     apb       296:                case "${arg}" in
                    297:                '')
                    298:                        qarg="''"
                    299:                        ;;
                    300:                *[!-./a-zA-Z0-9]*)
                    301:                        # Convert each embedded ' to '\'',
                    302:                        # then insert ' at the beginning of the first line,
                    303:                        # and append ' at the end of the last line.
                    304:                        # Finally, elide unnecessary '' pairs at the
                    305:                        # beginning and end of the result and as part of
                    306:                        # '\'''\'' sequences that result from multiple
                    307:                        # adjacent quotes in he input.
                    308:                        qarg="$(printf "%s\n" "$arg" | \
                    309:                            ${SED:-sed} -e "s/'/'\\\\''/g" \
                    310:                                -e "1s/^/'/" -e "\$s/\$/'/" \
                    311:                                -e "1s/^''//" -e "\$s/''\$//" \
                    312:                                -e "s/'''/'/g"
                    313:                                )"
                    314:                        ;;
                    315:                *)
                    316:                        # Arg is not the empty string, and does not contain
                    317:                        # any unsafe characters.  Leave it unchanged for
                    318:                        # readability.
                    319:                        qarg="${arg}"
                    320:                        ;;
                    321:                esac
                    322:                result="${result}${result:+ }${qarg}"
1.285     apb       323:        done
                    324:        printf "%s\n" "$result"
1.289     apb       325: )}
1.84      lukem     326:
1.98      lukem     327: statusmsg()
                    328: {
                    329:        ${runcmd} echo "===> $@" | tee -a "${results}"
                    330: }
                    331:
1.238     pgoyette  332: statusmsg2()
                    333: {
1.240     pgoyette  334:        local msg
                    335:
1.238     pgoyette  336:        msg="${1}"
                    337:        shift
1.239     pgoyette  338:        case "${msg}" in
1.238     pgoyette  339:        ????????????????*)      ;;
                    340:        ??????????*)            msg="${msg}      ";;
                    341:        ?????*)                 msg="${msg}           ";;
                    342:        *)                      msg="${msg}                ";;
                    343:        esac
1.239     pgoyette  344:        case "${msg}" in
1.238     pgoyette  345:        ?????????????????????*) ;;
                    346:        ????????????????????)   msg="${msg} ";;
                    347:        ???????????????????)    msg="${msg}  ";;
                    348:        ??????????????????)     msg="${msg}   ";;
                    349:        ?????????????????)      msg="${msg}    ";;
                    350:        ????????????????)       msg="${msg}     ";;
                    351:        esac
1.240     pgoyette  352:        statusmsg "${msg}$*"
1.238     pgoyette  353: }
                    354:
1.163     apb       355: warning()
                    356: {
                    357:        statusmsg "Warning: $@"
                    358: }
                    359:
1.168     apb       360: # Find a program in the PATH, and print the result.  If not found,
                    361: # print a default.  If $2 is defined (even if it is an empty string),
                    362: # then that is the default; otherwise, $1 is used as the default.
1.153     apb       363: find_in_PATH()
                    364: {
                    365:        local prog="$1"
1.168     apb       366:        local result="${2-"$1"}"
1.153     apb       367:        local oldIFS="${IFS}"
                    368:        local dir
                    369:        IFS=":"
                    370:        for dir in ${PATH}; do
                    371:                if [ -x "${dir}/${prog}" ]; then
1.168     apb       372:                        result="${dir}/${prog}"
1.153     apb       373:                        break
                    374:                fi
                    375:        done
                    376:        IFS="${oldIFS}"
1.168     apb       377:        echo "${result}"
1.153     apb       378: }
                    379:
                    380: # Try to find a working POSIX shell, and set HOST_SH to refer to it.
                    381: # Assumes that uname_s, uname_m, and PWD have been set.
                    382: set_HOST_SH()
                    383: {
                    384:        # Even if ${HOST_SH} is already defined, we still do the
                    385:        # sanity checks at the end.
                    386:
                    387:        # Solaris has /usr/xpg4/bin/sh.
                    388:        #
                    389:        [ -z "${HOST_SH}" ] && [ x"${uname_s}" = x"SunOS" ] && \
                    390:                [ -x /usr/xpg4/bin/sh ] && HOST_SH="/usr/xpg4/bin/sh"
                    391:
                    392:        # Try to get the name of the shell that's running this script,
                    393:        # by parsing the output from "ps".  We assume that, if the host
                    394:        # system's ps command supports -o comm at all, it will do so
                    395:        # in the usual way: a one-line header followed by a one-line
                    396:        # result, possibly including trailing white space.  And if the
                    397:        # host system's ps command doesn't support -o comm, we assume
                    398:        # that we'll get an error message on stderr and nothing on
                    399:        # stdout.  (We don't try to use ps -o 'comm=' to suppress the
                    400:        # header line, because that is less widely supported.)
                    401:        #
                    402:        # If we get the wrong result here, the user can override it by
                    403:        # specifying HOST_SH in the environment.
                    404:        #
                    405:        [ -z "${HOST_SH}" ] && HOST_SH="$(
1.200     apb       406:                (ps -p $$ -o comm | sed -ne "2s/[ ${tab}]*\$//p") 2>/dev/null )"
1.153     apb       407:
                    408:        # If nothing above worked, use "sh".  We will later find the
                    409:        # first directory in the PATH that has a "sh" program.
                    410:        #
                    411:        [ -z "${HOST_SH}" ] && HOST_SH="sh"
                    412:
                    413:        # If the result so far is not an absolute path, try to prepend
                    414:        # PWD or search the PATH.
                    415:        #
                    416:        case "${HOST_SH}" in
                    417:        /*)     :
                    418:                ;;
                    419:        */*)    HOST_SH="${PWD}/${HOST_SH}"
                    420:                ;;
                    421:        *)      HOST_SH="$(find_in_PATH "${HOST_SH}")"
                    422:                ;;
                    423:        esac
                    424:
                    425:        # If we don't have an absolute path by now, bomb.
                    426:        #
                    427:        case "${HOST_SH}" in
                    428:        /*)     :
                    429:                ;;
                    430:        *)      bomb "HOST_SH=\"${HOST_SH}\" is not an absolute path."
                    431:                ;;
                    432:        esac
                    433:
                    434:        # If HOST_SH is not executable, bomb.
                    435:        #
                    436:        [ -x "${HOST_SH}" ] ||
                    437:            bomb "HOST_SH=\"${HOST_SH}\" is not executable."
1.249     apb       438:
                    439:        # If HOST_SH fails tests, bomb.
                    440:        # ("$0" may be a path that is no longer valid, because we have
                    441:        # performed "cd $(dirname $0)", so don't use $0 here.)
                    442:        #
                    443:        "${HOST_SH}" build.sh --shelltest ||
                    444:            bomb "HOST_SH=\"${HOST_SH}\" failed functionality tests."
1.153     apb       445: }
                    446:
1.248     apb       447: # initdefaults --
                    448: # Set defaults before parsing command line options.
                    449: #
1.84      lukem     450: initdefaults()
                    451: {
1.171     apb       452:        makeenv=
                    453:        makewrapper=
                    454:        makewrappermachine=
                    455:        runcmd=
                    456:        operations=
                    457:        removedirs=
                    458:
1.156     dsl       459:        [ -d usr.bin/make ] || cd "$(dirname $0)"
1.84      lukem     460:        [ -d usr.bin/make ] ||
1.315     sevan     461:            bomb "usr.bin/make not found; build.sh must be run from the top \
                    462: level of source directory"
1.84      lukem     463:        [ -f share/mk/bsd.own.mk ] ||
                    464:            bomb "src/share/mk is missing; please re-fetch the source tree"
                    465:
1.248     apb       466:        # Set various environment variables to known defaults,
                    467:        # to minimize (cross-)build problems observed "in the field".
                    468:        #
                    469:        # LC_ALL=C must be set before we try to parse the output from
                    470:        # any command.  Other variables are set (or unset) here, before
                    471:        # we parse command line arguments.
                    472:        #
                    473:        # These variables can be overridden via "-V var=value" if
                    474:        # you know what you are doing.
                    475:        #
                    476:        unsetmakeenv INFODIR
                    477:        unsetmakeenv LESSCHARSET
                    478:        unsetmakeenv MAKEFLAGS
1.261     pooka     479:        unsetmakeenv TERMINFO
1.218     apb       480:        setmakeenv LC_ALL C
                    481:
1.204     apb       482:        # Find information about the build platform.  This should be
                    483:        # kept in sync with _HOST_OSNAME, _HOST_OSREL, and _HOST_ARCH
                    484:        # variables in share/mk/bsd.sys.mk.
                    485:        #
                    486:        # Note that "uname -p" is not part of POSIX, but we want uname_p
                    487:        # to be set to the host MACHINE_ARCH, if possible.  On systems
                    488:        # where "uname -p" fails, prints "unknown", or prints a string
                    489:        # that does not look like an identifier, fall back to using the
                    490:        # output from "uname -m" instead.
1.165     apb       491:        #
1.84      lukem     492:        uname_s=$(uname -s 2>/dev/null)
1.165     apb       493:        uname_r=$(uname -r 2>/dev/null)
1.84      lukem     494:        uname_m=$(uname -m 2>/dev/null)
1.204     apb       495:        uname_p=$(uname -p 2>/dev/null || echo "unknown")
                    496:        case "${uname_p}" in
1.327.2.1  christos  497:        ''|unknown|*[!-_A-Za-z0-9]*) uname_p="${uname_m}" ;;
1.204     apb       498:        esac
1.84      lukem     499:
1.202     sketch    500:        id_u=$(id -u 2>/dev/null || /usr/xpg4/bin/id -u 2>/dev/null)
                    501:
1.84      lukem     502:        # If $PWD is a valid name of the current directory, POSIX mandates
                    503:        # that pwd return it by default which causes problems in the
                    504:        # presence of symlinks.  Unsetting PWD is simpler than changing
                    505:        # every occurrence of pwd to use -P.
                    506:        #
1.147     dogcow    507:        # XXX Except that doesn't work on Solaris. Or many Linuces.
1.98      lukem     508:        #
1.84      lukem     509:        unset PWD
1.310     kre       510:        TOP=$( (exec pwd -P 2>/dev/null) || (exec pwd 2>/dev/null) )
1.84      lukem     511:
1.153     apb       512:        # The user can set HOST_SH in the environment, or we try to
                    513:        # guess an appropriate value.  Then we set several other
                    514:        # variables from HOST_SH.
                    515:        #
                    516:        set_HOST_SH
                    517:        setmakeenv HOST_SH "${HOST_SH}"
                    518:        setmakeenv BSHELL "${HOST_SH}"
                    519:        setmakeenv CONFIG_SHELL "${HOST_SH}"
                    520:
1.84      lukem     521:        # Set defaults.
1.98      lukem     522:        #
1.84      lukem     523:        toolprefix=nb
1.98      lukem     524:
1.95      thorpej   525:        # Some systems have a small ARG_MAX.  -X prevents make(1) from
                    526:        # exporting variables in the environment redundantly.
1.98      lukem     527:        #
1.95      thorpej   528:        case "${uname_s}" in
1.97      christos  529:        Darwin | FreeBSD | CYGWIN*)
1.248     apb       530:                MAKEFLAGS="-X ${MAKEFLAGS}"
1.95      thorpej   531:                ;;
                    532:        esac
1.98      lukem     533:
1.171     apb       534:        # do_{operation}=true if given operation is requested.
                    535:        #
1.84      lukem     536:        do_expertmode=false
                    537:        do_rebuildmake=false
                    538:        do_removedirs=false
                    539:        do_tools=false
1.327.2.1  christos  540:        do_libs=false
1.195     lukem     541:        do_cleandir=false
1.84      lukem     542:        do_obj=false
                    543:        do_build=false
                    544:        do_distribution=false
                    545:        do_release=false
                    546:        do_kernel=false
1.105     lukem     547:        do_releasekernel=false
1.300     uebayasi  548:        do_kernels=false
1.207     jnemeth   549:        do_modules=false
1.245     jmcneill  550:        do_installmodules=false
1.84      lukem     551:        do_install=false
1.87      lukem     552:        do_sets=false
1.100     lukem     553:        do_sourcesets=false
1.142     apb       554:        do_syspkgs=false
1.146     apb       555:        do_iso_image=false
1.172     jnemeth   556:        do_iso_image_source=false
1.254     tsutsui   557:        do_live_image=false
                    558:        do_install_image=false
1.264     christos  559:        do_disk_image=false
1.107     lukem     560:        do_params=false
1.219     pooka     561:        do_rump=false
1.98      lukem     562:
1.211     apb       563:        # done_{operation}=true if given operation has been done.
                    564:        #
                    565:        done_rebuildmake=false
                    566:
1.98      lukem     567:        # Create scratch directory
                    568:        #
                    569:        tmpdir="${TMPDIR-/tmp}/nbbuild$$"
                    570:        mkdir "${tmpdir}" || bomb "Cannot mkdir: ${tmpdir}"
                    571:        trap "cd /; rm -r -f \"${tmpdir}\"" 0
                    572:        results="${tmpdir}/build.sh.results"
1.116     jmmv      573:
                    574:        # Set source directories
                    575:        #
                    576:        setmakeenv NETBSDSRCDIR "${TOP}"
1.136     lukem     577:
1.233     cegger    578:        # Make sure KERNOBJDIR is an absolute path if defined
                    579:        #
                    580:        case "${KERNOBJDIR}" in
                    581:        ''|/*)  ;;
                    582:        *)      KERNOBJDIR="${TOP}/${KERNOBJDIR}"
                    583:                setmakeenv KERNOBJDIR "${KERNOBJDIR}"
                    584:                ;;
                    585:        esac
                    586:
1.165     apb       587:        # Find the version of NetBSD
                    588:        #
                    589:        DISTRIBVER="$(${HOST_SH} ${TOP}/sys/conf/osrelease.sh)"
                    590:
1.190     perry     591:        # Set the BUILDSEED to NetBSD-"N"
                    592:        #
                    593:        setmakeenv BUILDSEED "NetBSD-$(${HOST_SH} ${TOP}/sys/conf/osrelease.sh -m)"
                    594:
1.206     perry     595:        # Set MKARZERO to "yes"
                    596:        #
                    597:        setmakeenv MKARZERO "yes"
                    598:
1.84      lukem     599: }
1.29      jmc       600:
1.258     apb       601: # valid_MACHINE_ARCH -- A multi-line string, listing all valid
                    602: # MACHINE/MACHINE_ARCH pairs.
                    603: #
                    604: # Each line contains a MACHINE and MACHINE_ARCH value, an optional ALIAS
                    605: # which may be used to refer to the MACHINE/MACHINE_ARCH pair, and an
                    606: # optional DEFAULT or NO_DEFAULT keyword.
                    607: #
                    608: # When a MACHINE corresponds to multiple possible values of
                    609: # MACHINE_ARCH, then this table should list all allowed combinations.
                    610: # If the MACHINE is associated with a default MACHINE_ARCH (to be
                    611: # used when the user specifies the MACHINE but fails to specify the
                    612: # MACHINE_ARCH), then one of the lines should have the "DEFAULT"
                    613: # keyword.  If there is no default MACHINE_ARCH for a particular
                    614: # MACHINE, then there should be a line with the "NO_DEFAULT" keyword,
                    615: # and with a blank MACHINE_ARCH.
                    616: #
                    617: valid_MACHINE_ARCH='
                    618: MACHINE=acorn32                MACHINE_ARCH=arm
1.327.2.1  christos  619: MACHINE=acorn32                MACHINE_ARCH=earmv4     ALIAS=eacorn32 DEFAULT
1.258     apb       620: MACHINE=algor          MACHINE_ARCH=mips64el   ALIAS=algor64
                    621: MACHINE=algor          MACHINE_ARCH=mipsel     DEFAULT
                    622: MACHINE=alpha          MACHINE_ARCH=alpha
                    623: MACHINE=amd64          MACHINE_ARCH=x86_64
                    624: MACHINE=amiga          MACHINE_ARCH=m68k
                    625: MACHINE=amigappc       MACHINE_ARCH=powerpc
                    626: MACHINE=arc            MACHINE_ARCH=mips64el   ALIAS=arc64
                    627: MACHINE=arc            MACHINE_ARCH=mipsel     DEFAULT
                    628: MACHINE=atari          MACHINE_ARCH=m68k
                    629: MACHINE=bebox          MACHINE_ARCH=powerpc
1.286     riz       630: MACHINE=cats           MACHINE_ARCH=arm        ALIAS=ocats
                    631: MACHINE=cats           MACHINE_ARCH=earmv4     ALIAS=ecats DEFAULT
1.258     apb       632: MACHINE=cesfic         MACHINE_ARCH=m68k
                    633: MACHINE=cobalt         MACHINE_ARCH=mips64el   ALIAS=cobalt64
                    634: MACHINE=cobalt         MACHINE_ARCH=mipsel     DEFAULT
                    635: MACHINE=dreamcast      MACHINE_ARCH=sh3el
                    636: MACHINE=emips          MACHINE_ARCH=mipseb
1.267     kiyohara  637: MACHINE=epoc32         MACHINE_ARCH=arm
1.327.2.1  christos  638: MACHINE=epoc32         MACHINE_ARCH=earmv4     ALIAS=eepoc32 DEFAULT
1.286     riz       639: MACHINE=evbarm         MACHINE_ARCH=arm        ALIAS=evboarm-el
                    640: MACHINE=evbarm         MACHINE_ARCH=armeb      ALIAS=evboarm-eb
1.327.2.1  christos  641: MACHINE=evbarm         MACHINE_ARCH=earm       ALIAS=evbearm-el        ALIAS=evbarm-el DEFAULT
                    642: MACHINE=evbarm         MACHINE_ARCH=earmeb     ALIAS=evbearm-eb        ALIAS=evbarm-eb
                    643: MACHINE=evbarm         MACHINE_ARCH=earmhf     ALIAS=evbearmhf-el      ALIAS=evbarmhf-el
                    644: MACHINE=evbarm         MACHINE_ARCH=earmhfeb   ALIAS=evbearmhf-eb      ALIAS=evbarmhf-eb
                    645: MACHINE=evbarm         MACHINE_ARCH=earmv4     ALIAS=evbearmv4-el      ALIAS=evbarmv4-el
                    646: MACHINE=evbarm         MACHINE_ARCH=earmv4eb   ALIAS=evbearmv4-eb      ALIAS=evbarmv4-eb
                    647: MACHINE=evbarm         MACHINE_ARCH=earmv5     ALIAS=evbearmv5-el      ALIAS=evbarmv5-el
                    648: MACHINE=evbarm         MACHINE_ARCH=earmv5eb   ALIAS=evbearmv5-eb      ALIAS=evbarmv5-eb
                    649: MACHINE=evbarm         MACHINE_ARCH=earmv6     ALIAS=evbearmv6-el      ALIAS=evbarmv6-el
                    650: MACHINE=evbarm         MACHINE_ARCH=earmv6hf   ALIAS=evbearmv6hf-el    ALIAS=evbarmv6hf-el
                    651: MACHINE=evbarm         MACHINE_ARCH=earmv6eb   ALIAS=evbearmv6-eb      ALIAS=evbarmv6-eb
                    652: MACHINE=evbarm         MACHINE_ARCH=earmv6hfeb ALIAS=evbearmv6hf-eb    ALIAS=evbarmv6hf-eb
                    653: MACHINE=evbarm         MACHINE_ARCH=earmv7     ALIAS=evbearmv7-el      ALIAS=evbarmv7-el
                    654: MACHINE=evbarm         MACHINE_ARCH=earmv7eb   ALIAS=evbearmv7-eb      ALIAS=evbarmv7-eb
                    655: MACHINE=evbarm         MACHINE_ARCH=earmv7hf   ALIAS=evbearmv7hf-el    ALIAS=evbarmv7hf-el
                    656: MACHINE=evbarm         MACHINE_ARCH=earmv7hfeb ALIAS=evbearmv7hf-eb    ALIAS=evbarmv7hf-eb
                    657: MACHINE=evbarm         MACHINE_ARCH=aarch64    ALIAS=evbarm64-el       ALIAS=evbarm64 DEFAULT
1.325     ryo       658: MACHINE=evbarm         MACHINE_ARCH=aarch64eb  ALIAS=evbarm64-eb
1.270     matt      659: MACHINE=evbcf          MACHINE_ARCH=coldfire
1.258     apb       660: MACHINE=evbmips                MACHINE_ARCH=           NO_DEFAULT
                    661: MACHINE=evbmips                MACHINE_ARCH=mips64eb   ALIAS=evbmips64-eb
                    662: MACHINE=evbmips                MACHINE_ARCH=mips64el   ALIAS=evbmips64-el
                    663: MACHINE=evbmips                MACHINE_ARCH=mipseb     ALIAS=evbmips-eb
                    664: MACHINE=evbmips                MACHINE_ARCH=mipsel     ALIAS=evbmips-el
                    665: MACHINE=evbppc         MACHINE_ARCH=powerpc    DEFAULT
                    666: MACHINE=evbppc         MACHINE_ARCH=powerpc64  ALIAS=evbppc64
                    667: MACHINE=evbsh3         MACHINE_ARCH=           NO_DEFAULT
                    668: MACHINE=evbsh3         MACHINE_ARCH=sh3eb      ALIAS=evbsh3-eb
                    669: MACHINE=evbsh3         MACHINE_ARCH=sh3el      ALIAS=evbsh3-el
                    670: MACHINE=ews4800mips    MACHINE_ARCH=mipseb
                    671: MACHINE=hp300          MACHINE_ARCH=m68k
1.276     skrll     672: MACHINE=hppa           MACHINE_ARCH=hppa
1.286     riz       673: MACHINE=hpcarm         MACHINE_ARCH=arm        ALIAS=hpcoarm
1.288     riz       674: MACHINE=hpcarm         MACHINE_ARCH=earmv4     ALIAS=hpcearm DEFAULT
1.258     apb       675: MACHINE=hpcmips                MACHINE_ARCH=mipsel
                    676: MACHINE=hpcsh          MACHINE_ARCH=sh3el
                    677: MACHINE=i386           MACHINE_ARCH=i386
                    678: MACHINE=ia64           MACHINE_ARCH=ia64
                    679: MACHINE=ibmnws         MACHINE_ARCH=powerpc
1.286     riz       680: MACHINE=iyonix         MACHINE_ARCH=arm        ALIAS=oiyonix
                    681: MACHINE=iyonix         MACHINE_ARCH=earm       ALIAS=eiyonix DEFAULT
1.258     apb       682: MACHINE=landisk                MACHINE_ARCH=sh3el
                    683: MACHINE=luna68k                MACHINE_ARCH=m68k
                    684: MACHINE=mac68k         MACHINE_ARCH=m68k
                    685: MACHINE=macppc         MACHINE_ARCH=powerpc    DEFAULT
                    686: MACHINE=macppc         MACHINE_ARCH=powerpc64  ALIAS=macppc64
                    687: MACHINE=mipsco         MACHINE_ARCH=mipseb
                    688: MACHINE=mmeye          MACHINE_ARCH=sh3eb
                    689: MACHINE=mvme68k                MACHINE_ARCH=m68k
                    690: MACHINE=mvmeppc                MACHINE_ARCH=powerpc
1.286     riz       691: MACHINE=netwinder      MACHINE_ARCH=arm        ALIAS=onetwinder
                    692: MACHINE=netwinder      MACHINE_ARCH=earmv4     ALIAS=enetwinder DEFAULT
1.258     apb       693: MACHINE=news68k                MACHINE_ARCH=m68k
                    694: MACHINE=newsmips       MACHINE_ARCH=mipseb
                    695: MACHINE=next68k                MACHINE_ARCH=m68k
                    696: MACHINE=ofppc          MACHINE_ARCH=powerpc    DEFAULT
                    697: MACHINE=ofppc          MACHINE_ARCH=powerpc64  ALIAS=ofppc64
1.296     matt      698: MACHINE=or1k           MACHINE_ARCH=or1k
1.278     martin    699: MACHINE=playstation2   MACHINE_ARCH=mipsel
1.258     apb       700: MACHINE=pmax           MACHINE_ARCH=mips64el   ALIAS=pmax64
                    701: MACHINE=pmax           MACHINE_ARCH=mipsel     DEFAULT
                    702: MACHINE=prep           MACHINE_ARCH=powerpc
1.297     matt      703: MACHINE=riscv          MACHINE_ARCH=riscv64    ALIAS=riscv64 DEFAULT
                    704: MACHINE=riscv          MACHINE_ARCH=riscv32    ALIAS=riscv32
1.258     apb       705: MACHINE=rs6000         MACHINE_ARCH=powerpc
                    706: MACHINE=sandpoint      MACHINE_ARCH=powerpc
                    707: MACHINE=sbmips         MACHINE_ARCH=           NO_DEFAULT
                    708: MACHINE=sbmips         MACHINE_ARCH=mips64eb   ALIAS=sbmips64-eb
                    709: MACHINE=sbmips         MACHINE_ARCH=mips64el   ALIAS=sbmips64-el
                    710: MACHINE=sbmips         MACHINE_ARCH=mipseb     ALIAS=sbmips-eb
                    711: MACHINE=sbmips         MACHINE_ARCH=mipsel     ALIAS=sbmips-el
                    712: MACHINE=sgimips                MACHINE_ARCH=mips64eb   ALIAS=sgimips64
                    713: MACHINE=sgimips                MACHINE_ARCH=mipseb     DEFAULT
1.286     riz       714: MACHINE=shark          MACHINE_ARCH=arm        ALIAS=oshark
                    715: MACHINE=shark          MACHINE_ARCH=earmv4     ALIAS=eshark DEFAULT
1.258     apb       716: MACHINE=sparc          MACHINE_ARCH=sparc
                    717: MACHINE=sparc64                MACHINE_ARCH=sparc64
                    718: MACHINE=sun2           MACHINE_ARCH=m68000
                    719: MACHINE=sun3           MACHINE_ARCH=m68k
                    720: MACHINE=vax            MACHINE_ARCH=vax
                    721: MACHINE=x68k           MACHINE_ARCH=m68k
1.286     riz       722: MACHINE=zaurus         MACHINE_ARCH=arm        ALIAS=ozaurus
                    723: MACHINE=zaurus         MACHINE_ARCH=earm       ALIAS=ezaurus DEFAULT
1.258     apb       724: '
                    725:
                    726: # getarch -- find the default MACHINE_ARCH for a MACHINE,
                    727: # or convert an alias to a MACHINE/MACHINE_ARCH pair.
                    728: #
1.291     apb       729: # Saves the original value of MACHINE in makewrappermachine before
                    730: # alias processing.
1.258     apb       731: #
                    732: # Sets MACHINE and MACHINE_ARCH if the input MACHINE value is
                    733: # recognised as an alias, or recognised as a machine that has a default
                    734: # MACHINE_ARCH (or that has only one possible MACHINE_ARCH).
                    735: #
                    736: # Leaves MACHINE and MACHINE_ARCH unchanged if MACHINE is recognised
                    737: # as being associated with multiple MACHINE_ARCH values with no default.
                    738: #
                    739: # Bombs if MACHINE is not recognised.
                    740: #
1.79      lukem     741: getarch()
                    742: {
1.258     apb       743:        local IFS
                    744:        local found=""
                    745:        local line
                    746:
                    747:        IFS="${nl}"
                    748:        makewrappermachine="${MACHINE}"
                    749:        for line in ${valid_MACHINE_ARCH}; do
                    750:                line="${line%%#*}" # ignore comments
                    751:                line="$( IFS=" ${tab}" ; echo $line )" # normalise white space
                    752:                case "${line} " in
1.283     apb       753:                " ")
1.258     apb       754:                        # skip blank lines or comment lines
                    755:                        continue
                    756:                        ;;
                    757:                *" ALIAS=${MACHINE} "*)
                    758:                        # Found a line with a matching ALIAS=<alias>.
                    759:                        found="$line"
                    760:                        break
                    761:                        ;;
                    762:                "MACHINE=${MACHINE} "*" NO_DEFAULT"*)
                    763:                        # Found an explicit "NO_DEFAULT" for this MACHINE.
                    764:                        found="$line"
                    765:                        break
                    766:                        ;;
                    767:                "MACHINE=${MACHINE} "*" DEFAULT"*)
                    768:                        # Found an explicit "DEFAULT" for this MACHINE.
                    769:                        found="$line"
                    770:                        break
                    771:                        ;;
                    772:                "MACHINE=${MACHINE} "*)
                    773:                        # Found a line for this MACHINE.  If it's the
                    774:                        # first such line, then tentatively accept it.
                    775:                        # If it's not the first matching line, then
                    776:                        # remember that there was more than one match.
                    777:                        case "$found" in
                    778:                        '')     found="$line" ;;
1.290     apb       779:                        *)      found="MULTIPLE_MATCHES" ;;
1.258     apb       780:                        esac
                    781:                        ;;
                    782:                esac
                    783:        done
1.158     apb       784:
1.258     apb       785:        case "$found" in
                    786:        *NO_DEFAULT*|*MULTIPLE_MATCHES*)
                    787:                # MACHINE is OK, but MACHINE_ARCH is still unknown
                    788:                return
                    789:                ;;
                    790:        "MACHINE="*" MACHINE_ARCH="*)
                    791:                # Obey the MACHINE= and MACHINE_ARCH= parts of the line.
                    792:                IFS=" "
                    793:                for frag in ${found}; do
                    794:                        case "$frag" in
                    795:                        MACHINE=*|MACHINE_ARCH=*)
                    796:                                eval "$frag"
                    797:                                ;;
                    798:                        esac
                    799:                done
1.160     matt      800:                ;;
1.84      lukem     801:        *)
1.98      lukem     802:                bomb "Unknown target MACHINE: ${MACHINE}"
1.84      lukem     803:                ;;
1.1       tv        804:        esac
                    805: }
                    806:
1.258     apb       807: # validatearch -- check that the MACHINE/MACHINE_ARCH pair is supported.
                    808: #
                    809: # Bombs if the pair is not supported.
                    810: #
1.79      lukem     811: validatearch()
                    812: {
1.258     apb       813:        local IFS
                    814:        local line
                    815:        local foundpair=false foundmachine=false foundarch=false
                    816:
1.98      lukem     817:        case "${MACHINE_ARCH}" in
1.101     lukem     818:        "")
                    819:                bomb "No MACHINE_ARCH provided"
                    820:                ;;
1.98      lukem     821:        esac
                    822:
1.258     apb       823:        IFS="${nl}"
                    824:        for line in ${valid_MACHINE_ARCH}; do
                    825:                line="${line%%#*}" # ignore comments
                    826:                line="$( IFS=" ${tab}" ; echo $line )" # normalise white space
                    827:                case "${line} " in
1.283     apb       828:                " ")
1.258     apb       829:                        # skip blank lines or comment lines
                    830:                        continue
                    831:                        ;;
                    832:                "MACHINE=${MACHINE} MACHINE_ARCH=${MACHINE_ARCH} "*)
                    833:                        foundpair=true
                    834:                        ;;
                    835:                "MACHINE=${MACHINE} "*)
                    836:                        foundmachine=true
                    837:                        ;;
                    838:                *"MACHINE_ARCH=${MACHINE_ARCH} "*)
                    839:                        foundarch=true
                    840:                        ;;
                    841:                esac
                    842:        done
1.98      lukem     843:
1.258     apb       844:        case "${foundpair}:${foundmachine}:${foundarch}" in
                    845:        true:*)
                    846:                : OK
1.255     matt      847:                ;;
1.258     apb       848:        *:false:*)
                    849:                bomb "Unknown target MACHINE: ${MACHINE}"
1.98      lukem     850:                ;;
1.258     apb       851:        *:*:false)
                    852:                bomb "Unknown target MACHINE_ARCH: ${MACHINE_ARCH}"
1.148     mrg       853:                ;;
1.98      lukem     854:        *)
1.258     apb       855:                bomb "MACHINE_ARCH '${MACHINE_ARCH}' does not support MACHINE '${MACHINE}'"
1.84      lukem     856:                ;;
1.47      tv        857:        esac
                    858: }
                    859:
1.292     apb       860: # listarch -- list valid MACHINE/MACHINE_ARCH/ALIAS values,
                    861: # optionally restricted to those where the MACHINE and/or MACHINE_ARCH
                    862: # match specifed glob patterns.
                    863: #
                    864: listarch()
                    865: {
                    866:        local machglob="$1" archglob="$2"
                    867:        local IFS
                    868:        local wildcard="*"
                    869:        local line xline frag
                    870:        local line_matches_machine line_matches_arch
                    871:        local found=false
                    872:
                    873:        # Empty machglob or archglob should match anything
                    874:        : "${machglob:=${wildcard}}"
                    875:        : "${archglob:=${wildcard}}"
                    876:
                    877:        IFS="${nl}"
                    878:        for line in ${valid_MACHINE_ARCH}; do
                    879:                line="${line%%#*}" # ignore comments
                    880:                xline="$( IFS=" ${tab}" ; echo $line )" # normalise white space
                    881:                [ -z "${xline}" ] && continue # skip blank or comment lines
                    882:
                    883:                line_matches_machine=false
                    884:                line_matches_arch=false
                    885:
                    886:                IFS=" "
                    887:                for frag in ${xline}; do
                    888:                        case "${frag}" in
                    889:                        MACHINE=${machglob})
                    890:                                line_matches_machine=true ;;
                    891:                        ALIAS=${machglob})
                    892:                                line_matches_machine=true ;;
                    893:                        MACHINE_ARCH=${archglob})
                    894:                                line_matches_arch=true ;;
                    895:                        esac
                    896:                done
                    897:
                    898:                if $line_matches_machine && $line_matches_arch; then
                    899:                        found=true
                    900:                        echo "$line"
                    901:                fi
                    902:        done
                    903:        if ! $found; then
                    904:                echo >&2 "No match for" \
                    905:                    "MACHINE=${machglob} MACHINE_ARCH=${archglob}"
                    906:                return 1
                    907:        fi
                    908:        return 0
                    909: }
                    910:
1.210     apb       911: # nobomb_getmakevar --
                    912: # Given the name of a make variable in $1, print make's idea of the
                    913: # value of that variable, or return 1 if there's an error.
                    914: #
1.168     apb       915: nobomb_getmakevar()
1.79      lukem     916: {
1.168     apb       917:        [ -x "${make}" ] || return 1
                    918:        "${make}" -m ${TOP}/share/mk -s -B -f- _x_ <<EOF || return 1
1.15      tv        919: _x_:
                    920:        echo \${$1}
                    921: .include <bsd.prog.mk>
1.70      lukem     922: .include <bsd.kernobj.mk>
1.15      tv        923: EOF
                    924: }
                    925:
1.250     apb       926: # bomb_getmakevar --
1.210     apb       927: # Given the name of a make variable in $1, print make's idea of the
                    928: # value of that variable, or bomb if there's an error.
                    929: #
                    930: bomb_getmakevar()
1.168     apb       931: {
1.210     apb       932:        [ -x "${make}" ] || bomb "bomb_getmakevar $1: ${make} is not executable"
                    933:        nobomb_getmakevar "$1" || bomb "bomb_getmakevar $1: ${make} failed"
1.168     apb       934: }
                    935:
1.250     apb       936: # getmakevar --
1.210     apb       937: # Given the name of a make variable in $1, print make's idea of the
                    938: # value of that variable, or print a literal '$' followed by the
                    939: # variable name if ${make} is not executable.  This is intended for use in
                    940: # messages that need to be readable even if $make hasn't been built,
                    941: # such as when build.sh is run with the "-n" option.
                    942: #
1.98      lukem     943: getmakevar()
1.82      lukem     944: {
1.98      lukem     945:        if [ -x "${make}" ]; then
1.210     apb       946:                bomb_getmakevar "$1"
1.82      lukem     947:        else
                    948:                echo "\$$1"
                    949:        fi
                    950: }
                    951:
1.109     lukem     952: setmakeenv()
                    953: {
                    954:        eval "$1='$2'; export $1"
                    955:        makeenv="${makeenv} $1"
                    956: }
1.321     kre       957: safe_setmakeenv()
                    958: {
                    959:        case "$1" in
                    960:
                    961:        #       Look for any vars we want to prohibit here, like:
                    962:        # Bad | Dangerous)      usage "Cannot override $1 with -V";;
                    963:
                    964:        # That first char is OK has already been verified.
                    965:        *[!A-Za-z0-9_]*)        usage "Bad variable name (-V): '$1'";;
                    966:        esac
                    967:        setmakeenv "$@"
                    968: }
1.109     lukem     969:
1.111     lukem     970: unsetmakeenv()
                    971: {
                    972:        eval "unset $1"
                    973:        makeenv="${makeenv} $1"
                    974: }
1.321     kre       975: safe_unsetmakeenv()
                    976: {
                    977:        case "$1" in
                    978:
                    979:        #       Look for any vars user should not be able to unset
                    980:        # Needed | Must_Have)   usage "Variable $1 cannot be unset";;
                    981:
                    982:        [!A-Za-z_]* | *[!A-Za-z0-9_]*)  usage "Bad variable name (-Z): '$1'";;
                    983:        esac
                    984:        unsetmakeenv "$1"
                    985: }
1.111     lukem     986:
1.208     apb       987: # Given a variable name in $1, modify the variable in place as follows:
                    988: # For each space-separated word in the variable, call resolvepath.
1.189     dyoung    989: resolvepaths()
                    990: {
1.208     apb       991:        local var="$1"
                    992:        local val
                    993:        eval val=\"\${${var}}\"
                    994:        local newval=''
                    995:        local word
                    996:        for word in ${val}; do
                    997:                resolvepath word
                    998:                newval="${newval}${newval:+ }${word}"
1.189     dyoung    999:        done
1.208     apb      1000:        eval ${var}=\"\${newval}\"
1.189     dyoung   1001: }
                   1002:
1.208     apb      1003: # Given a variable name in $1, modify the variable in place as follows:
1.131     junyoung 1004: # Convert possibly-relative path to absolute path by prepending
                   1005: # ${TOP} if necessary.  Also delete trailing "/", if any.
1.79      lukem    1006: resolvepath()
                   1007: {
1.208     apb      1008:        local var="$1"
                   1009:        local val
                   1010:        eval val=\"\${${var}}\"
                   1011:        case "${val}" in
1.131     junyoung 1012:        /)
                   1013:                ;;
1.84      lukem    1014:        /*)
1.208     apb      1015:                val="${val%/}"
1.84      lukem    1016:                ;;
                   1017:        *)
1.208     apb      1018:                val="${TOP}/${val%/}"
1.84      lukem    1019:                ;;
1.10      tv       1020:        esac
1.208     apb      1021:        eval ${var}=\"\${val}\"
1.10      tv       1022: }
                   1023:
1.79      lukem    1024: usage()
                   1025: {
1.84      lukem    1026:        if [ -n "$*" ]; then
                   1027:                echo ""
                   1028:                echo "${progname}: $*"
                   1029:        fi
1.70      lukem    1030:        cat <<_usage_
1.83      lukem    1031:
1.312     christos 1032: Usage: ${progname} [-EhnoPRrUuxy] [-a arch] [-B buildid] [-C cdextras]
1.195     lukem    1033:                 [-D dest] [-j njob] [-M obj] [-m mach] [-N noisy]
                   1034:                 [-O obj] [-R release] [-S seed] [-T tools]
1.222     uebayasi 1035:                 [-V var=[value]] [-w wrapper] [-X x11src] [-Y extsrcsrc]
                   1036:                 [-Z var]
1.195     lukem    1037:                 operation [...]
1.84      lukem    1038:
1.86      lukem    1039:  Build operations (all imply "obj" and "tools"):
1.125     lukem    1040:     build               Run "make build".
                   1041:     distribution        Run "make distribution" (includes DESTDIR/etc/ files).
                   1042:     release             Run "make release" (includes kernels & distrib media).
1.84      lukem    1043:
                   1044:  Other operations:
1.125     lukem    1045:     help                Show this message and exit.
1.98      lukem    1046:     makewrapper         Create ${toolprefix}make-\${MACHINE} wrapper and ${toolprefix}make.
1.125     lukem    1047:                         Always performed.
1.195     lukem    1048:     cleandir            Run "make cleandir".  [Default unless -u is used]
1.125     lukem    1049:     obj                 Run "make obj".  [Default unless -o is used]
                   1050:     tools               Build and install tools.
                   1051:     install=idir        Run "make installworld" to \`idir' to install all sets
1.195     lukem    1052:                         except \`etc'.  Useful after "distribution" or "release"
1.105     lukem    1053:     kernel=conf         Build kernel with config file \`conf'
1.281     martin   1054:     kernel.gdb=conf     Build kernel (including netbsd.gdb) with config
1.303     uebayasi 1055:                         file \`conf'
1.125     lukem    1056:     releasekernel=conf  Install kernel built by kernel=conf to RELEASEDIR.
1.303     uebayasi 1057:     kernels             Build all kernels
1.245     jmcneill 1058:     installmodules=idir Run "make installmodules" to \`idir' to install all
                   1059:                         kernel modules.
1.226     mbalmer  1060:     modules             Build kernel modules.
1.219     pooka    1061:     rumptest            Do a linktest for rump (for developers).
1.186     lukem    1062:     sets                Create binary sets in
1.195     lukem    1063:                         RELEASEDIR/RELEASEMACHINEDIR/binary/sets.
                   1064:                         DESTDIR should be populated beforehand.
1.125     lukem    1065:     sourcesets          Create source sets in RELEASEDIR/source/sets.
1.186     lukem    1066:     syspkgs             Create syspkgs in
1.195     lukem    1067:                         RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs.
1.299     snj      1068:     iso-image           Create CD-ROM image in RELEASEDIR/images.
                   1069:     iso-image-source    Create CD-ROM image with source in RELEASEDIR/images.
1.253     tsutsui  1070:     live-image          Create bootable live image in
                   1071:                         RELEASEDIR/RELEASEMACHINEDIR/installation/liveimage.
                   1072:     install-image       Create bootable installation image in
                   1073:                         RELEASEDIR/RELEASEMACHINEDIR/installation/installimage.
1.307     wiz      1074:     disk-image=target   Create bootable disk image in
1.303     uebayasi 1075:                         RELEASEDIR/RELEASEMACHINEDIR/binary/gzimg/target.img.gz.
1.125     lukem    1076:     params              Display various make(1) parameters.
1.292     apb      1077:     list-arch           Display a list of valid MACHINE/MACHINE_ARCH values,
                   1078:                         and exit.  The list may be narrowed by passing glob
                   1079:                         patterns or exact values in MACHINE or MACHINE_ARCH.
1.84      lukem    1080:
                   1081:  Options:
1.246     wiz      1082:     -a arch        Set MACHINE_ARCH to arch.  [Default: deduced from MACHINE]
                   1083:     -B buildid     Set BUILDID to buildid.
                   1084:     -C cdextras    Append cdextras to CDEXTRA variable for inclusion on CD-ROM.
                   1085:     -D dest        Set DESTDIR to dest.  [Default: destdir.MACHINE]
                   1086:     -E             Set "expert" mode; disables various safety checks.
                   1087:                    Should not be used without expert knowledge of the build system.
                   1088:     -h             Print this help message.
                   1089:     -j njob        Run up to njob jobs in parallel; see make(1) -j.
                   1090:     -M obj         Set obj root directory to obj; sets MAKEOBJDIRPREFIX.
                   1091:                    Unsets MAKEOBJDIR.
1.291     apb      1092:     -m mach        Set MACHINE to mach.  Some mach values are actually
                   1093:                    aliases that set MACHINE/MACHINE_ARCH pairs.
                   1094:                    [Default: deduced from the host system if the host
                   1095:                    OS is NetBSD]
1.246     wiz      1096:     -N noisy       Set the noisyness (MAKEVERBOSE) level of the build:
                   1097:                        0   Minimal output ("quiet")
                   1098:                        1   Describe what is occurring
                   1099:                        2   Describe what is occurring and echo the actual command
                   1100:                        3   Ignore the effect of the "@" prefix in make commands
                   1101:                        4   Trace shell commands using the shell's -x flag
                   1102:                    [Default: 2]
                   1103:     -n             Show commands that would be executed, but do not execute them.
                   1104:     -O obj         Set obj root directory to obj; sets a MAKEOBJDIR pattern.
                   1105:                    Unsets MAKEOBJDIRPREFIX.
                   1106:     -o             Set MKOBJDIRS=no; do not create objdirs at start of build.
1.312     christos 1107:     -P             Set MKREPRO and MKREPRO_TIMESTAMP to the latest source
                   1108:                    CVS timestamp for reproducible builds.
1.246     wiz      1109:     -R release     Set RELEASEDIR to release.  [Default: releasedir]
                   1110:     -r             Remove contents of TOOLDIR and DESTDIR before building.
                   1111:     -S seed        Set BUILDSEED to seed.  [Default: NetBSD-majorversion]
                   1112:     -T tools       Set TOOLDIR to tools.  If unset, and TOOLDIR is not set in
                   1113:                    the environment, ${toolprefix}make will be (re)built
                   1114:                    unconditionally.
                   1115:     -U             Set MKUNPRIVED=yes; build without requiring root privileges,
                   1116:                    install from an UNPRIVED build with proper file permissions.
                   1117:     -u             Set MKUPDATE=yes; do not run "make cleandir" first.
                   1118:                    Without this, everything is rebuilt, including the tools.
                   1119:     -V var=[value] Set variable \`var' to \`value'.
                   1120:     -w wrapper     Create ${toolprefix}make script as wrapper.
                   1121:                    [Default: \${TOOLDIR}/bin/${toolprefix}make-\${MACHINE}]
                   1122:     -X x11src      Set X11SRCDIR to x11src.  [Default: /usr/xsrc]
                   1123:     -x             Set MKX11=yes; build X11 from X11SRCDIR
                   1124:     -Y extsrcsrc   Set EXTSRCSRCDIR to extsrcsrc.  [Default: /usr/extsrc]
                   1125:     -y             Set MKEXTSRC=yes; build extsrc from EXTSRCSRCDIR
                   1126:     -Z var         Unset ("zap") variable \`var'.
1.83      lukem    1127:
1.70      lukem    1128: _usage_
1.1       tv       1129:        exit 1
                   1130: }
                   1131:
1.84      lukem    1132: parseoptions()
                   1133: {
1.312     christos 1134:        opts='a:B:C:D:Ehj:M:m:N:nO:oPR:rS:T:UuV:w:X:xY:yZ:'
1.293     apb      1135:        opt_a=false
1.295     apb      1136:        opt_m=false
1.84      lukem    1137:
                   1138:        if type getopts >/dev/null 2>&1; then
                   1139:                # Use POSIX getopts.
1.98      lukem    1140:                #
                   1141:                getoptcmd='getopts ${opts} opt && opt=-${opt}'
1.84      lukem    1142:                optargcmd=':'
1.98      lukem    1143:                optremcmd='shift $((${OPTIND} -1))'
1.84      lukem    1144:        else
                   1145:                type getopt >/dev/null 2>&1 ||
1.249     apb      1146:                    bomb "Shell does not support getopts or getopt"
1.84      lukem    1147:
                   1148:                # Use old-style getopt(1) (doesn't handle whitespace in args).
1.98      lukem    1149:                #
                   1150:                args="$(getopt ${opts} $*)"
1.84      lukem    1151:                [ $? = 0 ] || usage
1.98      lukem    1152:                set -- ${args}
1.84      lukem    1153:
                   1154:                getoptcmd='[ $# -gt 0 ] && opt="$1" && shift'
                   1155:                optargcmd='OPTARG="$1"; shift'
                   1156:                optremcmd=':'
                   1157:        fi
                   1158:
                   1159:        # Parse command line options.
                   1160:        #
1.98      lukem    1161:        while eval ${getoptcmd}; do
                   1162:                case ${opt} in
1.84      lukem    1163:
                   1164:                -a)
1.98      lukem    1165:                        eval ${optargcmd}
                   1166:                        MACHINE_ARCH=${OPTARG}
1.293     apb      1167:                        opt_a=true
1.84      lukem    1168:                        ;;
                   1169:
                   1170:                -B)
1.98      lukem    1171:                        eval ${optargcmd}
                   1172:                        BUILDID=${OPTARG}
1.84      lukem    1173:                        ;;
                   1174:
1.174     jnemeth  1175:                -C)
1.208     apb      1176:                        eval ${optargcmd}; resolvepaths OPTARG
1.209     apb      1177:                        CDEXTRA="${CDEXTRA}${CDEXTRA:+ }${OPTARG}"
1.174     jnemeth  1178:                        ;;
                   1179:
1.84      lukem    1180:                -D)
1.208     apb      1181:                        eval ${optargcmd}; resolvepath OPTARG
1.109     lukem    1182:                        setmakeenv DESTDIR "${OPTARG}"
1.84      lukem    1183:                        ;;
                   1184:
                   1185:                -E)
                   1186:                        do_expertmode=true
                   1187:                        ;;
                   1188:
                   1189:                -j)
1.98      lukem    1190:                        eval ${optargcmd}
                   1191:                        parallel="-j ${OPTARG}"
1.84      lukem    1192:                        ;;
                   1193:
                   1194:                -M)
1.208     apb      1195:                        eval ${optargcmd}; resolvepath OPTARG
1.212     apb      1196:                        case "${OPTARG}" in
1.247     apb      1197:                        \$*)    usage "-M argument must not begin with '\$'"
1.212     apb      1198:                                ;;
                   1199:                        *\$*)   # can use resolvepath, but can't set TOP_objdir
                   1200:                                resolvepath OPTARG
                   1201:                                ;;
                   1202:                        *)      resolvepath OPTARG
                   1203:                                TOP_objdir="${OPTARG}${TOP}"
                   1204:                                ;;
                   1205:                        esac
1.111     lukem    1206:                        unsetmakeenv MAKEOBJDIR
1.109     lukem    1207:                        setmakeenv MAKEOBJDIRPREFIX "${OPTARG}"
1.84      lukem    1208:                        ;;
                   1209:
                   1210:                        # -m overrides MACHINE_ARCH unless "-a" is specified
                   1211:                -m)
1.98      lukem    1212:                        eval ${optargcmd}
                   1213:                        MACHINE="${OPTARG}"
1.295     apb      1214:                        opt_m=true
1.84      lukem    1215:                        ;;
                   1216:
1.119     lukem    1217:                -N)
                   1218:                        eval ${optargcmd}
                   1219:                        case "${OPTARG}" in
1.199     apb      1220:                        0|1|2|3|4)
1.121     lukem    1221:                                setmakeenv MAKEVERBOSE "${OPTARG}"
1.119     lukem    1222:                                ;;
                   1223:                        *)
                   1224:                                usage "'${OPTARG}' is not a valid value for -N"
                   1225:                                ;;
                   1226:                        esac
                   1227:                        ;;
                   1228:
1.84      lukem    1229:                -n)
                   1230:                        runcmd=echo
                   1231:                        ;;
                   1232:
                   1233:                -O)
1.212     apb      1234:                        eval ${optargcmd}
                   1235:                        case "${OPTARG}" in
1.247     apb      1236:                        *\$*)   usage "-O argument must not contain '\$'"
1.212     apb      1237:                                ;;
                   1238:                        *)      resolvepath OPTARG
                   1239:                                TOP_objdir="${OPTARG}"
                   1240:                                ;;
                   1241:                        esac
1.111     lukem    1242:                        unsetmakeenv MAKEOBJDIRPREFIX
1.109     lukem    1243:                        setmakeenv MAKEOBJDIR "\${.CURDIR:C,^$TOP,$OPTARG,}"
1.84      lukem    1244:                        ;;
                   1245:
                   1246:                -o)
                   1247:                        MKOBJDIRS=no
                   1248:                        ;;
                   1249:
1.312     christos 1250:                -P)
                   1251:                        MKREPRO=yes
                   1252:                        ;;
                   1253:
1.84      lukem    1254:                -R)
1.208     apb      1255:                        eval ${optargcmd}; resolvepath OPTARG
1.109     lukem    1256:                        setmakeenv RELEASEDIR "${OPTARG}"
1.84      lukem    1257:                        ;;
                   1258:
                   1259:                -r)
                   1260:                        do_removedirs=true
                   1261:                        do_rebuildmake=true
                   1262:                        ;;
                   1263:
1.190     perry    1264:                -S)
                   1265:                        eval ${optargcmd}
                   1266:                        setmakeenv BUILDSEED "${OPTARG}"
                   1267:                        ;;
                   1268:
1.84      lukem    1269:                -T)
1.208     apb      1270:                        eval ${optargcmd}; resolvepath OPTARG
1.98      lukem    1271:                        TOOLDIR="${OPTARG}"
1.84      lukem    1272:                        export TOOLDIR
                   1273:                        ;;
                   1274:
                   1275:                -U)
1.109     lukem    1276:                        setmakeenv MKUNPRIVED yes
1.84      lukem    1277:                        ;;
1.44      lukem    1278:
1.84      lukem    1279:                -u)
1.109     lukem    1280:                        setmakeenv MKUPDATE yes
1.84      lukem    1281:                        ;;
1.15      tv       1282:
1.84      lukem    1283:                -V)
1.98      lukem    1284:                        eval ${optargcmd}
1.84      lukem    1285:                        case "${OPTARG}" in
1.80      lukem    1286:                    # XXX: consider restricting which variables can be changed?
1.321     kre      1287:                        [a-zA-Z_]*=*)
                   1288:                                safe_setmakeenv "${OPTARG%%=*}" "${OPTARG#*=}"
                   1289:                                ;;
                   1290:                        [a-zA-Z_]*)
                   1291:                                safe_setmakeenv "${OPTARG}" ""
1.84      lukem    1292:                                ;;
                   1293:                        *)
1.327.2.1  christos 1294:                                usage "-V argument must be of the form 'var[=value]'"
1.84      lukem    1295:                                ;;
                   1296:                        esac
                   1297:                        ;;
                   1298:
                   1299:                -w)
1.208     apb      1300:                        eval ${optargcmd}; resolvepath OPTARG
1.98      lukem    1301:                        makewrapper="${OPTARG}"
1.84      lukem    1302:                        ;;
                   1303:
1.127     lukem    1304:                -X)
1.208     apb      1305:                        eval ${optargcmd}; resolvepath OPTARG
1.127     lukem    1306:                        setmakeenv X11SRCDIR "${OPTARG}"
                   1307:                        ;;
                   1308:
                   1309:                -x)
                   1310:                        setmakeenv MKX11 yes
                   1311:                        ;;
                   1312:
1.222     uebayasi 1313:                -Y)
                   1314:                        eval ${optargcmd}; resolvepath OPTARG
                   1315:                        setmakeenv EXTSRCSRCDIR "${OPTARG}"
                   1316:                        ;;
                   1317:
                   1318:                -y)
                   1319:                        setmakeenv MKEXTSRC yes
                   1320:                        ;;
                   1321:
1.111     lukem    1322:                -Z)
                   1323:                        eval ${optargcmd}
                   1324:                    # XXX: consider restricting which variables can be unset?
1.321     kre      1325:                        safe_unsetmakeenv "${OPTARG}"
1.111     lukem    1326:                        ;;
                   1327:
1.84      lukem    1328:                --)
                   1329:                        break
                   1330:                        ;;
                   1331:
                   1332:                -'?'|-h)
                   1333:                        usage
                   1334:                        ;;
                   1335:
                   1336:                esac
                   1337:        done
                   1338:
                   1339:        # Validate operations.
                   1340:        #
1.98      lukem    1341:        eval ${optremcmd}
1.84      lukem    1342:        while [ $# -gt 0 ]; do
                   1343:                op=$1; shift
1.98      lukem    1344:                operations="${operations} ${op}"
1.84      lukem    1345:
1.98      lukem    1346:                case "${op}" in
1.84      lukem    1347:
1.87      lukem    1348:                help)
                   1349:                        usage
                   1350:                        ;;
                   1351:
1.292     apb      1352:                list-arch)
                   1353:                        listarch "${MACHINE}" "${MACHINE_ARCH}"
                   1354:                        exit $?
                   1355:                        ;;
                   1356:
1.305     uebayasi 1357:                kernel=*|releasekernel=*|kernel.gdb=*)
1.84      lukem    1358:                        arg=${op#*=}
                   1359:                        op=${op%%=*}
1.98      lukem    1360:                        [ -n "${arg}" ] ||
1.105     lukem    1361:                            bomb "Must supply a kernel name with \`${op}=...'"
1.84      lukem    1362:                        ;;
                   1363:
1.264     christos 1364:                disk-image=*)
                   1365:                        arg=${op#*=}
                   1366:                        op=disk_image
                   1367:                        [ -n "${arg}" ] ||
                   1368:                            bomb "Must supply a target name with \`${op}=...'"
                   1369:
                   1370:                        ;;
                   1371:
1.245     jmcneill 1372:                install=*|installmodules=*)
1.84      lukem    1373:                        arg=${op#*=}
                   1374:                        op=${op%%=*}
1.98      lukem    1375:                        [ -n "${arg}" ] ||
                   1376:                            bomb "Must supply a directory with \`install=...'"
1.84      lukem    1377:                        ;;
                   1378:
1.301     apb      1379:                build|\
                   1380:                cleandir|\
                   1381:                distribution|\
                   1382:                install-image|\
                   1383:                iso-image-source|\
                   1384:                iso-image|\
                   1385:                kernels|\
1.327.2.1  christos 1386:                libs|\
1.301     apb      1387:                live-image|\
                   1388:                makewrapper|\
                   1389:                modules|\
                   1390:                obj|\
                   1391:                params|\
                   1392:                release|\
                   1393:                rump|\
                   1394:                rumptest|\
                   1395:                sets|\
                   1396:                sourcesets|\
                   1397:                syspkgs|\
                   1398:                tools)
1.219     pooka    1399:                        ;;
                   1400:
1.80      lukem    1401:                *)
1.84      lukem    1402:                        usage "Unknown operation \`${op}'"
                   1403:                        ;;
                   1404:
1.80      lukem    1405:                esac
1.301     apb      1406:                # ${op} may contain chars that are not allowed in variable
                   1407:                # names.  Replace them with '_' before setting do_${op}.
                   1408:                op="$( echo "$op" | tr -s '.-' '__')"
1.98      lukem    1409:                eval do_${op}=true
1.84      lukem    1410:        done
1.98      lukem    1411:        [ -n "${operations}" ] || usage "Missing operation to perform."
1.84      lukem    1412:
                   1413:        # Set up MACHINE*.  On a NetBSD host, these are allowed to be unset.
                   1414:        #
1.98      lukem    1415:        if [ -z "${MACHINE}" ]; then
                   1416:                [ "${uname_s}" = "NetBSD" ] ||
                   1417:                    bomb "MACHINE must be set, or -m must be used, for cross builds."
1.84      lukem    1418:                MACHINE=${uname_m}
1.327.2.1  christos 1419:                MACHINE_ARCH=${uname_p}
1.84      lukem    1420:        fi
1.295     apb      1421:        if $opt_m && ! $opt_a; then
                   1422:                # Settings implied by the command line -m option
                   1423:                # override MACHINE_ARCH from the environment (if any).
                   1424:                getarch
                   1425:        fi
                   1426:        [ -n "${MACHINE_ARCH}" ] || getarch
1.84      lukem    1427:        validatearch
                   1428:
                   1429:        # Set up default make(1) environment.
                   1430:        #
1.98      lukem    1431:        makeenv="${makeenv} TOOLDIR MACHINE MACHINE_ARCH MAKEFLAGS"
                   1432:        [ -z "${BUILDID}" ] || makeenv="${makeenv} BUILDID"
1.287     apb      1433:        [ -z "${BUILDINFO}" ] || makeenv="${makeenv} BUILDINFO"
1.248     apb      1434:        MAKEFLAGS="-de -m ${TOP}/share/mk ${MAKEFLAGS}"
                   1435:        MAKEFLAGS="${MAKEFLAGS} MKOBJDIRS=${MKOBJDIRS-yes}"
1.84      lukem    1436:        export MAKEFLAGS MACHINE MACHINE_ARCH
1.284     apb      1437:        setmakeenv USETOOLS "yes"
                   1438:        setmakeenv MAKEWRAPPERMACHINE "${makewrappermachine:-${MACHINE}}"
1.84      lukem    1439: }
                   1440:
1.248     apb      1441: # sanitycheck --
                   1442: # Sanity check after parsing command line options, before rebuildmake.
                   1443: #
1.163     apb      1444: sanitycheck()
                   1445: {
1.260     apb      1446:        # Install as non-root is a bad idea.
                   1447:        #
                   1448:        if ${do_install} && [ "$id_u" -ne 0 ] ; then
                   1449:                if ${do_expertmode}; then
                   1450:                        warning "Will install as an unprivileged user."
                   1451:                else
                   1452:                        bomb "-E must be set for install as an unprivileged user."
                   1453:                fi
                   1454:        fi
                   1455:
1.163     apb      1456:        # If the PATH contains any non-absolute components (including,
1.170     apb      1457:        # but not limited to, "." or ""), then complain.  As an exception,
                   1458:        # allow "" or "." as the last component of the PATH.  This is fatal
1.163     apb      1459:        # if expert mode is not in effect.
                   1460:        #
1.170     apb      1461:        local path="${PATH}"
                   1462:        path="${path%:}"        # delete trailing ":"
                   1463:        path="${path%:.}"       # delete trailing ":."
                   1464:        case ":${path}:/" in
1.327.2.2  martin   1465:        *:[!/~]*)
1.163     apb      1466:                if ${do_expertmode}; then
                   1467:                        warning "PATH contains non-absolute components"
                   1468:                else
1.164     apb      1469:                        bomb "PATH environment variable must not" \
                   1470:                             "contain non-absolute components"
1.163     apb      1471:                fi
                   1472:                ;;
                   1473:        esac
1.317     maya     1474:
1.320     kre      1475:        while [ ${MKX11-no} = "yes" ]; do               # not really a loop
                   1476:                test -n "${X11SRCDIR}" && {
                   1477:                    test -d "${X11SRCDIR}" ||
                   1478:                        bomb "X11SRCDIR (${X11SRCDIR}) does not exist (with -x)"
                   1479:                    break
                   1480:                }
                   1481:                for _xd in \
                   1482:                    "${NETBSDSRCDIR%/*}/xsrc" \
                   1483:                    "${NETBSDSRCDIR}/xsrc" \
                   1484:                    /usr/xsrc
                   1485:                do
                   1486:                    test -d "${_xd}" &&
                   1487:                        setmakeenv X11SRCDIR "${_xd}" &&
                   1488:                        break 2
                   1489:                done
1.318     maya     1490:                bomb "Asked to build X11 but no xsrc"
1.320     kre      1491:        done
1.163     apb      1492: }
1.317     maya     1493:
1.213     apb      1494: # print_tooldir_make --
                   1495: # Try to find and print a path to an existing
1.312     christos 1496: # ${TOOLDIR}/bin/${toolprefix}program
                   1497: print_tooldir_program()
1.168     apb      1498: {
1.213     apb      1499:        local possible_TOP_OBJ
                   1500:        local possible_TOOLDIR
1.312     christos 1501:        local possible_program
                   1502:        local tooldir_program
                   1503:        local program=${1}
1.213     apb      1504:
                   1505:        if [ -n "${TOOLDIR}" ]; then
1.312     christos 1506:                echo "${TOOLDIR}/bin/${toolprefix}${program}"
                   1507:                return
1.213     apb      1508:        fi
1.168     apb      1509:
1.198     apb      1510:        # Set host_ostype to something like "NetBSD-4.5.6-i386".  This
                   1511:        # is intended to match the HOST_OSTYPE variable in <bsd.own.mk>.
                   1512:        #
1.168     apb      1513:        local host_ostype="${uname_s}-$(
                   1514:                echo "${uname_r}" | sed -e 's/([^)]*)//g' -e 's/ /_/g'
1.194     lukem    1515:                )-$(
1.168     apb      1516:                echo "${uname_p}" | sed -e 's/([^)]*)//g' -e 's/ /_/g'
                   1517:                )"
                   1518:
1.198     apb      1519:        # Look in a few potential locations for
1.312     christos 1520:        # ${possible_TOOLDIR}/bin/${toolprefix}${program}.
                   1521:        # If we find it, then set possible_program.
1.198     apb      1522:        #
                   1523:        # In the usual case (without interference from environment
                   1524:        # variables or /etc/mk.conf), <bsd.own.mk> should set TOOLDIR to
1.212     apb      1525:        # "${_SRC_TOP_OBJ_}/tooldir.${host_ostype}".
                   1526:        #
                   1527:        # In practice it's difficult to figure out the correct value
                   1528:        # for _SRC_TOP_OBJ_.  In the easiest case, when the -M or -O
                   1529:        # options were passed to build.sh, then ${TOP_objdir} will be
                   1530:        # the correct value.  We also try a few other possibilities, but
                   1531:        # we do not replicate all the logic of <bsd.obj.mk>.
1.198     apb      1532:        #
1.212     apb      1533:        for possible_TOP_OBJ in \
                   1534:                "${TOP_objdir}" \
                   1535:                "${MAKEOBJDIRPREFIX:+${MAKEOBJDIRPREFIX}${TOP}}" \
                   1536:                "${TOP}" \
                   1537:                "${TOP}/obj" \
1.198     apb      1538:                "${TOP}/obj.${MACHINE}"
                   1539:        do
1.212     apb      1540:                [ -n "${possible_TOP_OBJ}" ] || continue
1.198     apb      1541:                possible_TOOLDIR="${possible_TOP_OBJ}/tooldir.${host_ostype}"
1.312     christos 1542:                possible_program="${possible_TOOLDIR}/bin/${toolprefix}${program}"
1.213     apb      1543:                if [ -x "${possible_make}" ]; then
1.312     christos 1544:                        echo ${possible_program}
                   1545:                        return;
1.198     apb      1546:                fi
                   1547:        done
1.312     christos 1548:        echo ""
                   1549: }
                   1550: # print_tooldir_make --
                   1551: # Try to find and print a path to an existing
                   1552: # ${TOOLDIR}/bin/${toolprefix}make, for use by rebuildmake() before a
                   1553: # new version of ${toolprefix}make has been built.
                   1554: #
                   1555: # * If TOOLDIR was set in the environment or on the command line, use
                   1556: #   that value.
                   1557: # * Otherwise try to guess what TOOLDIR would be if not overridden by
                   1558: #   /etc/mk.conf, and check whether the resulting directory contains
                   1559: #   a copy of ${toolprefix}make (this should work for everybody who
                   1560: #   doesn't override TOOLDIR via /etc/mk.conf);
                   1561: # * Failing that, search for ${toolprefix}make, nbmake, bmake, or make,
                   1562: #   in the PATH (this might accidentally find a version of make that
                   1563: #   does not understand the syntax used by NetBSD make, and that will
                   1564: #   lead to failure in the next step);
                   1565: # * If a copy of make was found above, try to use it with
                   1566: #   nobomb_getmakevar to find the correct value for TOOLDIR, and believe the
                   1567: #   result only if it's a directory that already exists;
                   1568: # * If a value of TOOLDIR was found above, and if
                   1569: #   ${TOOLDIR}/bin/${toolprefix}make exists, print that value.
                   1570: #
                   1571: print_tooldir_make()
                   1572: {
                   1573:        local possible_make
                   1574:        local possible_TOOLDIR
                   1575:        local tooldir_make
1.198     apb      1576:
1.312     christos 1577:        possible_make=$(print_tooldir_program make)
1.198     apb      1578:        # If the above didn't work, search the PATH for a suitable
                   1579:        # ${toolprefix}make, nbmake, bmake, or make.
                   1580:        #
1.213     apb      1581:        : ${possible_make:=$(find_in_PATH ${toolprefix}make '')}
                   1582:        : ${possible_make:=$(find_in_PATH nbmake '')}
                   1583:        : ${possible_make:=$(find_in_PATH bmake '')}
                   1584:        : ${possible_make:=$(find_in_PATH make '')}
                   1585:
                   1586:        # At this point, we don't care whether possible_make is in the
                   1587:        # correct TOOLDIR or not; we simply want it to be usable by
                   1588:        # getmakevar to help us find the correct TOOLDIR.
                   1589:        #
                   1590:        # Use ${possible_make} with nobomb_getmakevar to try to find
                   1591:        # the value of TOOLDIR.  Believe the result only if it's
                   1592:        # a directory that already exists and contains bin/${toolprefix}make.
                   1593:        #
                   1594:        if [ -x "${possible_make}" ]; then
                   1595:                possible_TOOLDIR="$(
1.250     apb      1596:                        make="${possible_make}" \
                   1597:                        nobomb_getmakevar TOOLDIR 2>/dev/null
1.213     apb      1598:                        )"
                   1599:                if [ $? = 0 ] && [ -n "${possible_TOOLDIR}" ] \
                   1600:                    && [ -d "${possible_TOOLDIR}" ];
                   1601:                then
                   1602:                        tooldir_make="${possible_TOOLDIR}/bin/${toolprefix}make"
                   1603:                        if [ -x "${tooldir_make}" ]; then
                   1604:                                echo "${tooldir_make}"
                   1605:                                return 0
                   1606:                        fi
                   1607:                fi
1.168     apb      1608:        fi
1.213     apb      1609:        return 1
1.168     apb      1610: }
                   1611:
1.213     apb      1612: # rebuildmake --
                   1613: # Rebuild nbmake in a temporary directory if necessary.  Sets $make
                   1614: # to a path to the nbmake executable.  Sets done_rebuildmake=true
                   1615: # if nbmake was rebuilt.
                   1616: #
                   1617: # There is a cyclic dependency between building nbmake and choosing
                   1618: # TOOLDIR: TOOLDIR may be affected by settings in /etc/mk.conf, so we
                   1619: # would like to use getmakevar to get the value of TOOLDIR; but we can't
                   1620: # use getmakevar before we have an up to date version of nbmake; we
                   1621: # might already have an up to date version of nbmake in TOOLDIR, but we
                   1622: # don't yet know where TOOLDIR is.
                   1623: #
                   1624: # The default value of TOOLDIR also depends on the location of the top
                   1625: # level object directory, so $(getmakevar TOOLDIR) invoked before or
                   1626: # after making the top level object directory may produce different
                   1627: # results.
                   1628: #
                   1629: # Strictly speaking, we should do the following:
                   1630: #
                   1631: #    1. build a new version of nbmake in a temporary directory;
                   1632: #    2. use the temporary nbmake to create the top level obj directory;
                   1633: #    3. use $(getmakevar TOOLDIR) with the temporary nbmake to
1.265     oki      1634: #       get the correct value of TOOLDIR;
1.214     apb      1635: #    4. move the temporary nbmake to ${TOOLDIR}/bin/nbmake.
1.213     apb      1636: #
                   1637: # However, people don't like building nbmake unnecessarily if their
                   1638: # TOOLDIR has not changed since an earlier build.  We try to avoid
                   1639: # rebuilding a temporary version of nbmake by taking some shortcuts to
                   1640: # guess a value for TOOLDIR, looking for an existing version of nbmake
                   1641: # in that TOOLDIR, and checking whether that nbmake is newer than the
                   1642: # sources used to build it.
                   1643: #
1.84      lukem    1644: rebuildmake()
                   1645: {
1.213     apb      1646:        make="$(print_tooldir_make)"
                   1647:        if [ -n "${make}" ] && [ -x "${make}" ]; then
1.84      lukem    1648:                for f in usr.bin/make/*.[ch] usr.bin/make/lst.lib/*.[ch]; do
1.98      lukem    1649:                        if [ "${f}" -nt "${make}" ]; then
1.213     apb      1650:                                statusmsg "${make} outdated" \
                   1651:                                        "(older than ${f}), needs building."
1.84      lukem    1652:                                do_rebuildmake=true
                   1653:                                break
                   1654:                        fi
                   1655:                done
                   1656:        else
1.213     apb      1657:                statusmsg "No \$TOOLDIR/bin/${toolprefix}make, needs building."
1.84      lukem    1658:                do_rebuildmake=true
                   1659:        fi
                   1660:
                   1661:        # Build bootstrap ${toolprefix}make if needed.
1.309     christos 1662:        if ! ${do_rebuildmake}; then
                   1663:                return
1.84      lukem    1664:        fi
1.309     christos 1665:
                   1666:        statusmsg "Bootstrapping ${toolprefix}make"
                   1667:        ${runcmd} cd "${tmpdir}"
1.323     uwe      1668:        ${runcmd} env CC="${HOST_CC-cc}" CPPFLAGS="${HOST_CPPFLAGS}" \
                   1669:                CFLAGS="${HOST_CFLAGS--O}" LDFLAGS="${HOST_LDFLAGS}" \
1.309     christos 1670:            ${HOST_SH} "${TOP}/tools/make/configure" ||
                   1671:        ( cp ${tmpdir}/config.log ${tmpdir}-config.log
                   1672:              bomb "Configure of ${toolprefix}make failed, see ${tmpdir}-config.log for details" )
                   1673:        ${runcmd} ${HOST_SH} buildmake.sh ||
                   1674:            bomb "Build of ${toolprefix}make failed"
                   1675:        make="${tmpdir}/${toolprefix}make"
                   1676:        ${runcmd} cd "${TOP}"
                   1677:        ${runcmd} rm -f usr.bin/make/*.o usr.bin/make/lst.lib/*.o
                   1678:        done_rebuildmake=true
1.84      lukem    1679: }
                   1680:
1.248     apb      1681: # validatemakeparams --
                   1682: # Perform some late sanity checks, after rebuildmake,
                   1683: # but before createmakewrapper or any real work.
                   1684: #
1.257     apb      1685: # Creates the top-level obj directory, because that
                   1686: # is needed by some of the sanity checks.
                   1687: #
                   1688: # Prints status messages reporting the values of several variables.
1.248     apb      1689: #
1.84      lukem    1690: validatemakeparams()
                   1691: {
1.257     apb      1692:        # MAKECONF (which defaults to /etc/mk.conf in share/mk/bsd.own.mk)
                   1693:        # can affect many things, so mention it in an early status message.
                   1694:        #
                   1695:        MAKECONF=$(getmakevar MAKECONF)
                   1696:        if [ -e "${MAKECONF}" ]; then
                   1697:                statusmsg2 "MAKECONF file:" "${MAKECONF}"
                   1698:        else
                   1699:                statusmsg2 "MAKECONF file:" "${MAKECONF} (File not found)"
                   1700:        fi
                   1701:
1.275     apb      1702:        # Normalise MKOBJDIRS, MKUNPRIVED, and MKUPDATE.
                   1703:        # These may be set as build.sh options or in "mk.conf".
                   1704:        # Don't export them as they're only used for tests in build.sh.
                   1705:        #
                   1706:        MKOBJDIRS=$(getmakevar MKOBJDIRS)
                   1707:        MKUNPRIVED=$(getmakevar MKUNPRIVED)
                   1708:        MKUPDATE=$(getmakevar MKUPDATE)
                   1709:
                   1710:        # Non-root should always use either the -U or -E flag.
                   1711:        #
                   1712:        if ! ${do_expertmode} && \
                   1713:            [ "$id_u" -ne 0 ] && \
                   1714:            [ "${MKUNPRIVED}" = "no" ] ; then
                   1715:                bomb "-U or -E must be set for build as an unprivileged user."
                   1716:        fi
                   1717:
1.98      lukem    1718:        if [ "${runcmd}" = "echo" ]; then
1.84      lukem    1719:                TOOLCHAIN_MISSING=no
                   1720:                EXTERNAL_TOOLCHAIN=""
                   1721:        else
1.210     apb      1722:                TOOLCHAIN_MISSING=$(bomb_getmakevar TOOLCHAIN_MISSING)
                   1723:                EXTERNAL_TOOLCHAIN=$(bomb_getmakevar EXTERNAL_TOOLCHAIN)
1.84      lukem    1724:        fi
                   1725:        if [ "${TOOLCHAIN_MISSING}" = "yes" ] && \
1.86      lukem    1726:           [ -z "${EXTERNAL_TOOLCHAIN}" ]; then
1.98      lukem    1727:                ${runcmd} echo "ERROR: build.sh (in-tree cross-toolchain) is not yet available for"
                   1728:                ${runcmd} echo "        MACHINE:      ${MACHINE}"
                   1729:                ${runcmd} echo "        MACHINE_ARCH: ${MACHINE_ARCH}"
                   1730:                ${runcmd} echo ""
                   1731:                ${runcmd} echo "All builds for this platform should be done via a traditional make"
                   1732:                ${runcmd} echo "If you wish to use an external cross-toolchain, set"
                   1733:                ${runcmd} echo "        EXTERNAL_TOOLCHAIN=<path to toolchain root>"
                   1734:                ${runcmd} echo "in either the environment or mk.conf and rerun"
                   1735:                ${runcmd} echo "        ${progname} $*"
1.84      lukem    1736:                exit 1
                   1737:        fi
                   1738:
1.106     lukem    1739:        if [ "${MKOBJDIRS}" != "no" ]; then
1.212     apb      1740:                # Create the top-level object directory.
1.106     lukem    1741:                #
1.212     apb      1742:                # "make obj NOSUBDIR=" can handle most cases, but it
                   1743:                # can't handle the case where MAKEOBJDIRPREFIX is set
                   1744:                # while the corresponding directory does not exist
                   1745:                # (rules in <bsd.obj.mk> would abort the build).  We
                   1746:                # therefore have to handle the MAKEOBJDIRPREFIX case
                   1747:                # without invoking "make obj".  The MAKEOBJDIR case
                   1748:                # could be handled either way, but we choose to handle
                   1749:                # it similarly to MAKEOBJDIRPREFIX.
1.191     apb      1750:                #
1.212     apb      1751:                if [ -n "${TOP_obj}" ]; then
                   1752:                        # It must have been set by the "-M" or "-O"
                   1753:                        # command line options, so there's no need to
                   1754:                        # use getmakevar
                   1755:                        :
                   1756:                elif [ -n "$MAKEOBJDIRPREFIX" ]; then
                   1757:                        TOP_obj="$(getmakevar MAKEOBJDIRPREFIX)${TOP}"
                   1758:                elif [ -n "$MAKEOBJDIR" ]; then
                   1759:                        TOP_obj="$(getmakevar MAKEOBJDIR)"
                   1760:                fi
                   1761:                if [ -n "$TOP_obj" ]; then
                   1762:                        ${runcmd} mkdir -p "${TOP_obj}" ||
                   1763:                            bomb "Can't create top level object directory" \
                   1764:                                        "${TOP_obj}"
                   1765:                else
                   1766:                        ${runcmd} "${make}" -m ${TOP}/share/mk obj NOSUBDIR= ||
                   1767:                            bomb "Can't create top level object directory" \
                   1768:                                        "using make obj"
1.106     lukem    1769:                fi
                   1770:
1.212     apb      1771:                # make obj in tools to ensure that the objdir for "tools"
                   1772:                # is available.
1.106     lukem    1773:                #
1.98      lukem    1774:                ${runcmd} cd tools
                   1775:                ${runcmd} "${make}" -m ${TOP}/share/mk obj NOSUBDIR= ||
                   1776:                    bomb "Failed to make obj in tools"
                   1777:                ${runcmd} cd "${TOP}"
1.84      lukem    1778:        fi
1.80      lukem    1779:
1.215     apb      1780:        # Find TOOLDIR, DESTDIR, and RELEASEDIR, according to getmakevar,
                   1781:        # and bomb if they have changed from the values we had from the
                   1782:        # command line or environment.
                   1783:        #
1.212     apb      1784:        # This must be done after creating the top-level object directory.
1.84      lukem    1785:        #
1.215     apb      1786:        for var in TOOLDIR DESTDIR RELEASEDIR
                   1787:        do
                   1788:                eval oldval=\"\$${var}\"
                   1789:                newval="$(getmakevar $var)"
                   1790:                if ! $do_expertmode; then
1.216     enami    1791:                        : ${_SRC_TOP_OBJ_:=$(getmakevar _SRC_TOP_OBJ_)}
1.215     apb      1792:                        case "$var" in
                   1793:                        DESTDIR)
                   1794:                                : ${newval:=${_SRC_TOP_OBJ_}/destdir.${MACHINE}}
1.217     apb      1795:                                makeenv="${makeenv} DESTDIR"
1.215     apb      1796:                                ;;
                   1797:                        RELEASEDIR)
                   1798:                                : ${newval:=${_SRC_TOP_OBJ_}/releasedir}
1.217     apb      1799:                                makeenv="${makeenv} RELEASEDIR"
1.215     apb      1800:                                ;;
                   1801:                        esac
                   1802:                fi
                   1803:                if [ -n "$oldval" ] && [ "$oldval" != "$newval" ]; then
                   1804:                        bomb "Value of ${var} has changed" \
                   1805:                                "(was \"${oldval}\", now \"${newval}\")"
                   1806:                fi
                   1807:                eval ${var}=\"\${newval}\"
                   1808:                eval export ${var}
1.238     pgoyette 1809:                statusmsg2 "${var} path:" "${newval}"
1.215     apb      1810:        done
                   1811:
                   1812:        # RELEASEMACHINEDIR is just a subdir name, e.g. "i386".
1.186     lukem    1813:        RELEASEMACHINEDIR=$(getmakevar RELEASEMACHINEDIR)
1.84      lukem    1814:
                   1815:        # Check validity of TOOLDIR and DESTDIR.
                   1816:        #
1.98      lukem    1817:        if [ -z "${TOOLDIR}" ] || [ "${TOOLDIR}" = "/" ]; then
                   1818:                bomb "TOOLDIR '${TOOLDIR}' invalid"
1.84      lukem    1819:        fi
1.98      lukem    1820:        removedirs="${TOOLDIR}"
1.15      tv       1821:
1.98      lukem    1822:        if [ -z "${DESTDIR}" ] || [ "${DESTDIR}" = "/" ]; then
1.260     apb      1823:                if ${do_distribution} || ${do_release} || \
                   1824:                   [ "${uname_s}" != "NetBSD" ] || \
                   1825:                   [ "${uname_m}" != "${MACHINE}" ]; then
                   1826:                        bomb "DESTDIR must != / for cross builds, or ${progname} 'distribution' or 'release'."
                   1827:                fi
                   1828:                if ! ${do_expertmode}; then
                   1829:                        bomb "DESTDIR must != / for non -E (expert) builds"
1.1       tv       1830:                fi
1.260     apb      1831:                statusmsg "WARNING: Building to /, in expert mode."
                   1832:                statusmsg "         This may cause your system to break!  Reasons include:"
                   1833:                statusmsg "            - your kernel is not up to date"
                   1834:                statusmsg "            - the libraries or toolchain have changed"
                   1835:                statusmsg "         YOU HAVE BEEN WARNED!"
1.84      lukem    1836:        else
1.98      lukem    1837:                removedirs="${removedirs} ${DESTDIR}"
1.84      lukem    1838:        fi
1.105     lukem    1839:        if ${do_releasekernel} && [ -z "${RELEASEDIR}" ]; then
                   1840:                bomb "Must set RELEASEDIR with \`releasekernel=...'"
                   1841:        fi
1.185     apb      1842:
                   1843:        # If a previous build.sh run used -U (and therefore created a
                   1844:        # METALOG file), then most subsequent build.sh runs must also
                   1845:        # use -U.  If DESTDIR is about to be removed, then don't perform
                   1846:        # this check.
                   1847:        #
                   1848:        case "${do_removedirs} ${removedirs} " in
                   1849:        true*" ${DESTDIR} "*)
                   1850:                # DESTDIR is about to be removed
                   1851:                ;;
                   1852:        *)
1.260     apb      1853:                if [ -e "${DESTDIR}/METALOG" ] && \
1.185     apb      1854:                    [ "${MKUNPRIVED}" = "no" ] ; then
                   1855:                        if $do_expertmode; then
                   1856:                                warning "A previous build.sh run specified -U."
                   1857:                        else
                   1858:                                bomb "A previous build.sh run specified -U; you must specify it again now."
                   1859:                        fi
                   1860:                fi
                   1861:                ;;
                   1862:        esac
1.254     tsutsui  1863:
                   1864:        # live-image and install-image targets require binary sets
                   1865:        # (actually DESTDIR/etc/mtree/set.* files) built with MKUNPRIVED.
                   1866:        # If release operation is specified with live-image or install-image,
                   1867:        # the release op should be performed with -U for later image ops.
                   1868:        #
                   1869:        if ${do_release} && ( ${do_live_image} || ${do_install_image} ) && \
                   1870:            [ "${MKUNPRIVED}" = "no" ] ; then
                   1871:                bomb "-U must be specified on building release to create images later."
                   1872:        fi
1.84      lukem    1873: }
1.30      jmc      1874:
1.15      tv       1875:
1.84      lukem    1876: createmakewrapper()
                   1877: {
                   1878:        # Remove the target directories.
                   1879:        #
1.98      lukem    1880:        if ${do_removedirs}; then
                   1881:                for f in ${removedirs}; do
                   1882:                        statusmsg "Removing ${f}"
                   1883:                        ${runcmd} rm -r -f "${f}"
1.84      lukem    1884:                done
                   1885:        fi
1.15      tv       1886:
1.84      lukem    1887:        # Recreate $TOOLDIR.
                   1888:        #
1.98      lukem    1889:        ${runcmd} mkdir -p "${TOOLDIR}/bin" ||
                   1890:            bomb "mkdir of '${TOOLDIR}/bin' failed"
1.84      lukem    1891:
1.214     apb      1892:        # If we did not previously rebuild ${toolprefix}make, then
                   1893:        # check whether $make is still valid and the same as the output
                   1894:        # from print_tooldir_make.  If not, then rebuild make now.  A
                   1895:        # possible reason for this being necessary is that the actual
                   1896:        # value of TOOLDIR might be different from the value guessed
                   1897:        # before the top level obj dir was created.
                   1898:        #
                   1899:        if ! ${done_rebuildmake} && \
                   1900:            ( [ ! -x "$make" ] || [ "$make" != "$(print_tooldir_make)" ] )
                   1901:        then
                   1902:                rebuildmake
                   1903:        fi
                   1904:
1.84      lukem    1905:        # Install ${toolprefix}make if it was built.
                   1906:        #
1.211     apb      1907:        if ${done_rebuildmake}; then
1.98      lukem    1908:                ${runcmd} rm -f "${TOOLDIR}/bin/${toolprefix}make"
                   1909:                ${runcmd} cp "${make}" "${TOOLDIR}/bin/${toolprefix}make" ||
                   1910:                    bomb "Failed to install \$TOOLDIR/bin/${toolprefix}make"
                   1911:                make="${TOOLDIR}/bin/${toolprefix}make"
                   1912:                statusmsg "Created ${make}"
1.84      lukem    1913:        fi
1.15      tv       1914:
1.84      lukem    1915:        # Build a ${toolprefix}make wrapper script, usable by hand as
                   1916:        # well as by build.sh.
                   1917:        #
1.98      lukem    1918:        if [ -z "${makewrapper}" ]; then
1.102     lukem    1919:                makewrapper="${TOOLDIR}/bin/${toolprefix}make-${makewrappermachine:-${MACHINE}}"
1.98      lukem    1920:                [ -z "${BUILDID}" ] || makewrapper="${makewrapper}-${BUILDID}"
1.52      thorpej  1921:        fi
1.4       tv       1922:
1.98      lukem    1923:        ${runcmd} rm -f "${makewrapper}"
                   1924:        if [ "${runcmd}" = "echo" ]; then
                   1925:                echo 'cat <<EOF >'${makewrapper}
1.84      lukem    1926:                makewrapout=
                   1927:        else
1.98      lukem    1928:                makewrapout=">>\${makewrapper}"
1.84      lukem    1929:        fi
1.18      tv       1930:
1.139     isaki    1931:        case "${KSH_VERSION:-${SH_VERSION}}" in
1.149     jnemeth  1932:        *PD\ KSH*|*MIRBSD\ KSH*)
1.135     isaki    1933:                set +o braceexpand
                   1934:                ;;
                   1935:        esac
                   1936:
1.98      lukem    1937:        eval cat <<EOF ${makewrapout}
1.153     apb      1938: #! ${HOST_SH}
1.4       tv       1939: # Set proper variables to allow easy "make" building of a NetBSD subtree.
1.327.2.4! martin   1940: # Generated from:  \$NetBSD: build.sh,v 1.334 2020/03/28 20:13:13 jmcneill Exp $
1.130     jmc      1941: # with these arguments: ${_args}
1.4       tv       1942: #
1.177     uebayasi 1943:
1.18      tv       1944: EOF
1.177     uebayasi 1945:        {
1.285     apb      1946:                sorted_vars="$(for var in ${makeenv}; do echo "${var}" ; done \
                   1947:                        | sort -u )"
                   1948:                for var in ${sorted_vars}; do
                   1949:                        eval val=\"\${${var}}\"
                   1950:                        eval is_set=\"\${${var}+set}\"
                   1951:                        if [ -z "${is_set}" ]; then
                   1952:                                echo "unset ${var}"
1.177     uebayasi 1953:                        else
1.285     apb      1954:                                qval="$(shell_quote "${val}")"
                   1955:                                echo "${var}=${qval}; export ${var}"
1.177     uebayasi 1956:                        fi
                   1957:                done
1.18      tv       1958:
1.285     apb      1959:                cat <<EOF
1.18      tv       1960:
1.98      lukem    1961: exec "\${TOOLDIR}/bin/${toolprefix}make" \${1+"\$@"}
1.4       tv       1962: EOF
1.285     apb      1963:        } | eval cat "${makewrapout}"
1.98      lukem    1964:        [ "${runcmd}" = "echo" ] && echo EOF
                   1965:        ${runcmd} chmod +x "${makewrapper}"
1.238     pgoyette 1966:        statusmsg2 "Updated makewrapper:" "${makewrapper}"
1.84      lukem    1967: }
                   1968:
1.203     lukem    1969: make_in_dir()
                   1970: {
1.312     christos 1971:        local dir="$1"
                   1972:        local op="$2"
1.203     lukem    1973:        ${runcmd} cd "${dir}" ||
                   1974:            bomb "Failed to cd to \"${dir}\""
                   1975:        ${runcmd} "${makewrapper}" ${parallel} ${op} ||
                   1976:            bomb "Failed to make ${op} in \"${dir}\""
                   1977:        ${runcmd} cd "${TOP}" ||
                   1978:            bomb "Failed to cd back to \"${TOP}\""
                   1979: }
                   1980:
1.84      lukem    1981: buildtools()
                   1982: {
1.98      lukem    1983:        if [ "${MKOBJDIRS}" != "no" ]; then
                   1984:                ${runcmd} "${makewrapper}" ${parallel} obj-tools ||
                   1985:                    bomb "Failed to make obj-tools"
1.84      lukem    1986:        fi
1.124     lukem    1987:        if [ "${MKUPDATE}" = "no" ]; then
1.203     lukem    1988:                make_in_dir tools cleandir
1.84      lukem    1989:        fi
1.259     joerg    1990:        make_in_dir tools build_install
1.98      lukem    1991:        statusmsg "Tools built to ${TOOLDIR}"
1.84      lukem    1992: }
1.4       tv       1993:
1.327.2.1  christos 1994: buildlibs()
                   1995: {
                   1996:        if [ "${MKOBJDIRS}" != "no" ]; then
                   1997:                ${runcmd} "${makewrapper}" ${parallel} obj ||
                   1998:                    bomb "Failed to make obj"
                   1999:        fi
                   2000:        if [ "${MKUPDATE}" = "no" ]; then
                   2001:                make_in_dir lib cleandir
                   2002:        fi
                   2003:        make_in_dir . do-distrib-dirs
                   2004:        make_in_dir . includes
                   2005:        make_in_dir . do-lib
                   2006:        statusmsg "libs built"
                   2007: }
                   2008:
1.105     lukem    2009: getkernelconf()
1.84      lukem    2010: {
1.105     lukem    2011:        kernelconf="$1"
1.114     lukem    2012:        if [ "${MKOBJDIRS}" != "no" ]; then
1.84      lukem    2013:                # The correct value of KERNOBJDIR might
                   2014:                # depend on a prior "make obj" in
                   2015:                # ${KERNSRCDIR}/${KERNARCHDIR}/compile.
                   2016:                #
1.98      lukem    2017:                KERNSRCDIR="$(getmakevar KERNSRCDIR)"
                   2018:                KERNARCHDIR="$(getmakevar KERNARCHDIR)"
1.203     lukem    2019:                make_in_dir "${KERNSRCDIR}/${KERNARCHDIR}/compile" obj
1.84      lukem    2020:        fi
1.98      lukem    2021:        KERNCONFDIR="$(getmakevar KERNCONFDIR)"
                   2022:        KERNOBJDIR="$(getmakevar KERNOBJDIR)"
1.105     lukem    2023:        case "${kernelconf}" in
1.84      lukem    2024:        */*)
1.105     lukem    2025:                kernelconfpath="${kernelconf}"
                   2026:                kernelconfname="${kernelconf##*/}"
1.84      lukem    2027:                ;;
                   2028:        *)
1.105     lukem    2029:                kernelconfpath="${KERNCONFDIR}/${kernelconf}"
                   2030:                kernelconfname="${kernelconf}"
1.84      lukem    2031:                ;;
                   2032:        esac
1.105     lukem    2033:        kernelbuildpath="${KERNOBJDIR}/${kernelconfname}"
                   2034: }
                   2035:
1.264     christos 2036: diskimage()
                   2037: {
                   2038:        ARG="$(echo $1 | tr '[:lower:]' '[:upper:]')"
                   2039:        [ -f "${DESTDIR}/etc/mtree/set.base" ] ||
                   2040:            bomb "The release binaries must be built first"
                   2041:        kerneldir="${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/kernel"
                   2042:        kernel="${kerneldir}/netbsd-${ARG}.gz"
                   2043:        [ -f "${kernel}" ] ||
                   2044:            bomb "The kernel ${kernel} must be built first"
                   2045:        make_in_dir "${NETBSDSRCDIR}/etc" "smp_${1}"
                   2046: }
                   2047:
1.105     lukem    2048: buildkernel()
                   2049: {
                   2050:        if ! ${do_tools} && ! ${buildkernelwarned:-false}; then
                   2051:                # Building tools every time we build a kernel is clearly
                   2052:                # unnecessary.  We could try to figure out whether rebuilding
                   2053:                # the tools is necessary this time, but it doesn't seem worth
                   2054:                # the trouble.  Instead, we say it's the user's responsibility
                   2055:                # to rebuild the tools if necessary.
                   2056:                #
                   2057:                statusmsg "Building kernel without building new tools"
                   2058:                buildkernelwarned=true
                   2059:        fi
                   2060:        getkernelconf $1
1.238     pgoyette 2061:        statusmsg2 "Building kernel:" "${kernelconf}"
                   2062:        statusmsg2 "Build directory:" "${kernelbuildpath}"
1.105     lukem    2063:        ${runcmd} mkdir -p "${kernelbuildpath}" ||
                   2064:            bomb "Cannot mkdir: ${kernelbuildpath}"
1.124     lukem    2065:        if [ "${MKUPDATE}" = "no" ]; then
1.203     lukem    2066:                make_in_dir "${kernelbuildpath}" cleandir
1.16      thorpej  2067:        fi
1.157     rillig   2068:        [ -x "${TOOLDIR}/bin/${toolprefix}config" ] \
                   2069:        || bomb "${TOOLDIR}/bin/${toolprefix}config does not exist. You need to \"$0 tools\" first."
1.305     uebayasi 2070:        CONFIGOPTS=$(getmakevar CONFIGOPTS)
                   2071:        ${runcmd} "${TOOLDIR}/bin/${toolprefix}config" ${CONFIGOPTS} \
                   2072:                -b "${kernelbuildpath}" -s "${TOP}/sys" ${configopts} \
                   2073:                "${kernelconfpath}" ||
1.105     lukem    2074:            bomb "${toolprefix}config failed for ${kernelconf}"
1.203     lukem    2075:        make_in_dir "${kernelbuildpath}" depend
                   2076:        make_in_dir "${kernelbuildpath}" all
1.91      lukem    2077:
1.98      lukem    2078:        if [ "${runcmd}" != "echo" ]; then
1.105     lukem    2079:                statusmsg "Kernels built from ${kernelconf}:"
                   2080:                kernlist=$(awk '$1 == "config" { print $2 }' ${kernelconfpath})
1.91      lukem    2081:                for kern in ${kernlist:-netbsd}; do
1.105     lukem    2082:                        [ -f "${kernelbuildpath}/${kern}" ] && \
                   2083:                            echo "  ${kernelbuildpath}/${kern}"
1.98      lukem    2084:                done | tee -a "${results}"
1.91      lukem    2085:        fi
1.84      lukem    2086: }
                   2087:
1.105     lukem    2088: releasekernel()
                   2089: {
                   2090:        getkernelconf $1
1.186     lukem    2091:        kernelreldir="${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/kernel"
1.105     lukem    2092:        ${runcmd} mkdir -p "${kernelreldir}"
                   2093:        kernlist=$(awk '$1 == "config" { print $2 }' ${kernelconfpath})
                   2094:        for kern in ${kernlist:-netbsd}; do
                   2095:                builtkern="${kernelbuildpath}/${kern}"
                   2096:                [ -f "${builtkern}" ] || continue
                   2097:                releasekern="${kernelreldir}/${kern}-${kernelconfname}.gz"
1.238     pgoyette 2098:                statusmsg2 "Kernel copy:" "${releasekern}"
1.196     lukem    2099:                if [ "${runcmd}" = "echo" ]; then
                   2100:                        echo "gzip -c -9 < ${builtkern} > ${releasekern}"
                   2101:                else
                   2102:                        gzip -c -9 < "${builtkern}" > "${releasekern}"
                   2103:                fi
1.105     lukem    2104:        done
                   2105: }
                   2106:
1.300     uebayasi 2107: buildkernels()
                   2108: {
1.306     christos 2109:        allkernels=$( runcmd= make_in_dir etc '-V ${ALL_KERNELS}' )
1.300     uebayasi 2110:        for k in $allkernels; do
                   2111:                buildkernel "${k}"
                   2112:        done
                   2113: }
                   2114:
1.207     jnemeth  2115: buildmodules()
                   2116: {
1.234     morr     2117:        setmakeenv MKBINUTILS no
1.207     jnemeth  2118:        if ! ${do_tools} && ! ${buildmoduleswarned:-false}; then
                   2119:                # Building tools every time we build modules is clearly
                   2120:                # unnecessary as well as a kernel.
                   2121:                #
                   2122:                statusmsg "Building modules without building new tools"
                   2123:                buildmoduleswarned=true
                   2124:        fi
                   2125:
                   2126:        statusmsg "Building kernel modules for NetBSD/${MACHINE} ${DISTRIBVER}"
                   2127:        if [ "${MKOBJDIRS}" != "no" ]; then
1.256     tsutsui  2128:                make_in_dir sys/modules obj
1.207     jnemeth  2129:        fi
                   2130:        if [ "${MKUPDATE}" = "no" ]; then
                   2131:                make_in_dir sys/modules cleandir
                   2132:        fi
1.256     tsutsui  2133:        make_in_dir sys/modules dependall
                   2134:        make_in_dir sys/modules install
1.207     jnemeth  2135:
1.236     pgoyette 2136:        statusmsg "Successful build of kernel modules for NetBSD/${MACHINE} ${DISTRIBVER}"
1.207     jnemeth  2137: }
                   2138:
1.245     jmcneill 2139: installmodules()
                   2140: {
                   2141:        dir="$1"
                   2142:        ${runcmd} "${makewrapper}" INSTALLMODULESDIR="${dir}" installmodules ||
                   2143:            bomb "Failed to make installmodules to ${dir}"
                   2144:        statusmsg "Successful installmodules to ${dir}"
                   2145: }
                   2146:
1.84      lukem    2147: installworld()
                   2148: {
                   2149:        dir="$1"
1.98      lukem    2150:        ${runcmd} "${makewrapper}" INSTALLWORLDDIR="${dir}" installworld ||
                   2151:            bomb "Failed to make installworld to ${dir}"
                   2152:        statusmsg "Successful installworld to ${dir}"
1.84      lukem    2153: }
                   2154:
1.219     pooka    2155: # Run rump build&link tests.
                   2156: #
                   2157: # To make this feasible for running without having to install includes and
                   2158: # libraries into destdir (i.e. quick), we only run ld.  This is possible
                   2159: # since the rump kernel is a closed namespace apart from calls to rumpuser.
                   2160: # Therefore, if ld complains only about rumpuser symbols, rump kernel
                   2161: # linking was successful.
1.246     wiz      2162: #
1.219     pooka    2163: # We test that rump links with a number of component configurations.
                   2164: # These attempt to mimic what is encountered in the full build.
                   2165: # See list below.  The list should probably be either autogenerated
1.246     wiz      2166: # or managed elsewhere; keep it here until a better idea arises.
1.219     pooka    2167: #
                   2168: # Above all, note that THIS IS NOT A SUBSTITUTE FOR A FULL BUILD.
                   2169: #
                   2170:
                   2171: RUMP_LIBSETS='
                   2172:        -lrump,
                   2173:        -lrumpvfs -lrump,
1.252     jym      2174:        -lrumpvfs -lrumpdev -lrump,
1.235     pooka    2175:        -lrumpnet -lrump,
1.237     pooka    2176:        -lrumpkern_tty -lrumpvfs -lrump,
1.219     pooka    2177:        -lrumpfs_tmpfs -lrumpvfs -lrump,
1.230     pooka    2178:        -lrumpfs_ffs -lrumpfs_msdos -lrumpvfs -lrumpdev_disk -lrumpdev -lrump,
1.311     ast      2179:        -lrumpnet_virtif -lrumpnet_netinet -lrumpnet_net -lrumpnet
                   2180:            -lrumpdev -lrumpvfs -lrump,
1.219     pooka    2181:        -lrumpnet_sockin -lrumpfs_smbfs -lrumpdev_netsmb
1.242     pooka    2182:            -lrumpkern_crypto -lrumpdev -lrumpnet -lrumpvfs -lrump,
1.220     pooka    2183:        -lrumpnet_sockin -lrumpfs_nfs -lrumpnet -lrumpvfs -lrump,
                   2184:        -lrumpdev_cgd -lrumpdev_raidframe -lrumpdev_disk -lrumpdev_rnd
1.242     pooka    2185:            -lrumpdev_dm -lrumpdev -lrumpvfs -lrumpkern_crypto -lrump'
1.219     pooka    2186: dorump()
                   2187: {
                   2188:        local doclean=""
                   2189:        local doobjs=""
                   2190:
                   2191:        # we cannot link libs without building csu, and that leads to lossage
                   2192:        [ "${1}" != "rumptest" ] && bomb 'build.sh rump not yet functional. ' \
                   2193:            'did you mean "rumptest"?'
                   2194:
1.273     pooka    2195:        export RUMPKERN_ONLY=1
1.227     pooka    2196:        # create obj and distrib dirs
1.228     pooka    2197:        if [ "${MKOBJDIRS}" != "no" ]; then
                   2198:                make_in_dir "${NETBSDSRCDIR}/etc/mtree" obj
                   2199:                make_in_dir "${NETBSDSRCDIR}/sys/rump" obj
                   2200:        fi
1.227     pooka    2201:        ${runcmd} "${makewrapper}" ${parallel} do-distrib-dirs \
                   2202:            || bomb 'could not create distrib-dirs'
                   2203:
1.219     pooka    2204:        [ "${MKUPDATE}" = "no" ] && doclean="cleandir"
                   2205:        targlist="${doclean} ${doobjs} dependall install"
                   2206:        # optimize: for test we build only static libs (3x test speedup)
                   2207:        if [ "${1}" = "rumptest" ] ; then
                   2208:                setmakeenv NOPIC 1
                   2209:                setmakeenv NOPROFILE 1
                   2210:        fi
                   2211:        for cmd in ${targlist} ; do
                   2212:                make_in_dir "${NETBSDSRCDIR}/sys/rump" ${cmd}
                   2213:        done
                   2214:
                   2215:        # if we just wanted to build & install rump, we're done
                   2216:        [ "${1}" != "rumptest" ] && return
                   2217:
1.221     pooka    2218:        ${runcmd} cd "${NETBSDSRCDIR}/sys/rump/librump/rumpkern" \
                   2219:            || bomb "cd to rumpkern failed"
                   2220:        md_quirks=`${runcmd} "${makewrapper}" -V '${_SYMQUIRK}'`
                   2221:        # one little, two little, three little backslashes ...
1.231     hans     2222:        md_quirks="$(echo ${md_quirks} | sed 's,\\,\\\\,g'";s/'//g" )"
1.221     pooka    2223:        ${runcmd} cd "${TOP}" || bomb "cd to ${TOP} failed"
1.219     pooka    2224:        tool_ld=`${runcmd} "${makewrapper}" -V '${LD}'`
1.221     pooka    2225:
1.219     pooka    2226:        local oIFS="${IFS}"
                   2227:        IFS=","
                   2228:        for set in ${RUMP_LIBSETS} ; do
                   2229:                IFS="${oIFS}"
                   2230:                ${runcmd} ${tool_ld} -nostdlib -L${DESTDIR}/usr/lib     \
1.241     pooka    2231:                    -static --whole-archive ${set} 2>&1 -o /tmp/rumptest.$$ | \
1.221     pooka    2232:                      awk -v quirks="${md_quirks}" '
1.219     pooka    2233:                        /undefined reference/ &&
                   2234:                            !/more undefined references.*follow/{
1.221     pooka    2235:                                if (match($NF,
1.266     pooka    2236:                                    "`(rumpuser_|rumpcomp_|__" quirks ")") == 0)
1.219     pooka    2237:                                        fails[NR] = $0
1.221     pooka    2238:                        }
1.230     pooka    2239:                        /cannot find -l/{fails[NR] = $0}
1.241     pooka    2240:                        /cannot open output file/{fails[NR] = $0}
1.219     pooka    2241:                        END{
                   2242:                                for (x in fails)
                   2243:                                        print fails[x]
                   2244:                                exit x!=0
                   2245:                        }'
                   2246:                [ $? -ne 0 ] && bomb "Testlink of rump failed: ${set}"
                   2247:        done
                   2248:        statusmsg "Rump build&link tests successful"
                   2249: }
1.84      lukem    2250:
1.312     christos 2251: setup_mkrepro()
                   2252: {
                   2253:        if [ ${MKREPRO-no} != "yes" ]; then
                   2254:                return
                   2255:        fi
1.314     christos 2256:        local dirs=${NETBSDSRCDIR-/usr/src}/
1.312     christos 2257:        if [ ${MKX11-no} = "yes" ]; then
1.314     christos 2258:                dirs="$dirs ${X11SRCDIR-/usr/xsrc}/"
1.312     christos 2259:        fi
                   2260:        local cvslatest=$(print_tooldir_program cvslatest)
1.316     christos 2261:        if [ ! -x "${cvslatest}" ]; then
                   2262:                buildtools
                   2263:        fi
                   2264:        MKREPRO_TIMESTAMP=$("${cvslatest}" ${dirs})
1.313     christos 2265:        [ -n "${MKREPRO_TIMESTAMP}" ] || bomb "Failed to compute timestamp"
1.316     christos 2266:        statusmsg2 "MKREPRO_TIMESTAMP" "$(TZ=UTC date -r ${MKREPRO_TIMESTAMP})"
1.312     christos 2267:        export MKREPRO MKREPRO_TIMESTAMP
                   2268: }
                   2269:
1.84      lukem    2270: main()
                   2271: {
                   2272:        initdefaults
1.130     jmc      2273:        _args=$@
1.84      lukem    2274:        parseoptions "$@"
1.93      lukem    2275:
1.163     apb      2276:        sanitycheck
                   2277:
1.93      lukem    2278:        build_start=$(date)
1.240     pgoyette 2279:        statusmsg2 "${progname} command:" "$0 $*"
1.238     pgoyette 2280:        statusmsg2 "${progname} started:" "${build_start}"
                   2281:        statusmsg2 "NetBSD version:"   "${DISTRIBVER}"
                   2282:        statusmsg2 "MACHINE:"          "${MACHINE}"
                   2283:        statusmsg2 "MACHINE_ARCH:"     "${MACHINE_ARCH}"
                   2284:        statusmsg2 "Build platform:"   "${uname_s} ${uname_r} ${uname_m}"
                   2285:        statusmsg2 "HOST_SH:"          "${HOST_SH}"
1.282     apb      2286:        if [ -n "${BUILDID}" ]; then
                   2287:                statusmsg2 "BUILDID:"  "${BUILDID}"
                   2288:        fi
1.287     apb      2289:        if [ -n "${BUILDINFO}" ]; then
                   2290:                printf "%b\n" "${BUILDINFO}" | \
                   2291:                while read -r line ; do
                   2292:                        [ -s "${line}" ] && continue
                   2293:                        statusmsg2 "BUILDINFO:"  "${line}"
                   2294:                done
                   2295:        fi
1.153     apb      2296:
1.84      lukem    2297:        rebuildmake
                   2298:        validatemakeparams
                   2299:        createmakewrapper
1.316     christos 2300:        setup_mkrepro
1.84      lukem    2301:
                   2302:        # Perform the operations.
                   2303:        #
1.98      lukem    2304:        for op in ${operations}; do
                   2305:                case "${op}" in
1.86      lukem    2306:
                   2307:                makewrapper)
                   2308:                        # no-op
                   2309:                        ;;
1.84      lukem    2310:
                   2311:                tools)
                   2312:                        buildtools
                   2313:                        ;;
1.327.2.1  christos 2314:                libs)
                   2315:                        buildlibs
                   2316:                        ;;
1.84      lukem    2317:
1.125     lukem    2318:                sets)
                   2319:                        statusmsg "Building sets from pre-populated ${DESTDIR}"
                   2320:                        ${runcmd} "${makewrapper}" ${parallel} ${op} ||
                   2321:                            bomb "Failed to make ${op}"
1.186     lukem    2322:                        setdir=${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
                   2323:                        statusmsg "Built sets to ${setdir}"
1.125     lukem    2324:                        ;;
1.142     apb      2325:
1.312     christos 2326:                build|distribution|release)
                   2327:                        ${runcmd} "${makewrapper}" ${parallel} ${op} ||
                   2328:                            bomb "Failed to make ${op}"
                   2329:                        statusmsg "Successful make ${op}"
                   2330:                        ;;
                   2331:
                   2332:                cleandir|obj|sourcesets|syspkgs|params)
1.98      lukem    2333:                        ${runcmd} "${makewrapper}" ${parallel} ${op} ||
                   2334:                            bomb "Failed to make ${op}"
                   2335:                        statusmsg "Successful make ${op}"
1.84      lukem    2336:                        ;;
                   2337:
1.173     jnemeth  2338:                iso-image|iso-image-source)
                   2339:                        ${runcmd} "${makewrapper}" ${parallel} \
1.209     apb      2340:                            CDEXTRA="$CDEXTRA" ${op} ||
1.173     jnemeth  2341:                            bomb "Failed to make ${op}"
                   2342:                        statusmsg "Successful make ${op}"
                   2343:                        ;;
                   2344:
1.254     tsutsui  2345:                live-image|install-image)
                   2346:                        # install-image and live-image require mtree spec files
                   2347:                        # built with UNPRIVED.  Assume UNPRIVED build has been
                   2348:                        # performed if METALOG file is created in DESTDIR.
                   2349:                        if [ ! -e "${DESTDIR}/METALOG" ] ; then
                   2350:                                bomb "The release binaries must have been built with -U to create images."
                   2351:                        fi
1.253     tsutsui  2352:                        ${runcmd} "${makewrapper}" ${parallel} ${op} ||
                   2353:                            bomb "Failed to make ${op}"
                   2354:                        statusmsg "Successful make ${op}"
                   2355:                        ;;
1.84      lukem    2356:                kernel=*)
                   2357:                        arg=${op#*=}
                   2358:                        buildkernel "${arg}"
1.105     lukem    2359:                        ;;
1.281     martin   2360:                kernel.gdb=*)
                   2361:                        arg=${op#*=}
1.302     uebayasi 2362:                        configopts="-D DEBUG=-g"
                   2363:                        buildkernel "${arg}"
                   2364:                        ;;
1.105     lukem    2365:                releasekernel=*)
                   2366:                        arg=${op#*=}
                   2367:                        releasekernel "${arg}"
1.84      lukem    2368:                        ;;
                   2369:
1.300     uebayasi 2370:                kernels)
                   2371:                        buildkernels
                   2372:                        ;;
                   2373:
1.264     christos 2374:                disk-image=*)
                   2375:                        arg=${op#*=}
                   2376:                        diskimage "${arg}"
                   2377:                        ;;
                   2378:
1.207     jnemeth  2379:                modules)
                   2380:                        buildmodules
                   2381:                        ;;
                   2382:
1.245     jmcneill 2383:                installmodules=*)
                   2384:                        arg=${op#*=}
                   2385:                        if [ "${arg}" = "/" ] && \
                   2386:                            (   [ "${uname_s}" != "NetBSD" ] || \
                   2387:                                [ "${uname_m}" != "${MACHINE}" ] ); then
                   2388:                                bomb "'${op}' must != / for cross builds."
                   2389:                        fi
                   2390:                        installmodules "${arg}"
                   2391:                        ;;
                   2392:
1.84      lukem    2393:                install=*)
                   2394:                        arg=${op#*=}
1.85      lukem    2395:                        if [ "${arg}" = "/" ] && \
                   2396:                            (   [ "${uname_s}" != "NetBSD" ] || \
1.98      lukem    2397:                                [ "${uname_m}" != "${MACHINE}" ] ); then
1.85      lukem    2398:                                bomb "'${op}' must != / for cross builds."
                   2399:                        fi
1.84      lukem    2400:                        installworld "${arg}"
1.70      lukem    2401:                        ;;
1.84      lukem    2402:
1.219     pooka    2403:                rump|rumptest)
                   2404:                        dorump "${op}"
                   2405:                        ;;
                   2406:
1.70      lukem    2407:                *)
1.84      lukem    2408:                        bomb "Unknown operation \`${op}'"
1.70      lukem    2409:                        ;;
1.84      lukem    2410:
1.70      lukem    2411:                esac
1.84      lukem    2412:        done
1.93      lukem    2413:
1.238     pgoyette 2414:        statusmsg2 "${progname} ended:" "$(date)"
1.98      lukem    2415:        if [ -s "${results}" ]; then
                   2416:                echo "===> Summary of results:"
                   2417:                sed -e 's/^===>//;s/^/  /' "${results}"
                   2418:                echo "===> ."
                   2419:        fi
1.84      lukem    2420: }
                   2421:
                   2422: main "$@"

CVSweb <webmaster@jp.NetBSD.org>