CVS log for src/bin/sh/redir.h

Up to [cvs.NetBSD.org] / src / bin / sh

Request diff between arbitrary revisions

Keyword substitution: kv
Default branch: MAIN

This commit is intended to be what was intended to happen in the
commit of Sun Nov 10 01:22:24 UTC 2024, see:

    http://mail-index.netbsd.org/source-changes/2024/11/10/msg154310.html

The commit message for that applies to this one (wholly).   I believe that
the problem with that version which caused it to be reverted has been found
and fixed in this version (a necessary change was made as part of one of
the fixes, but the side-effect implications of that were missed -- bad bad me.)

In addition, I found some more issues with setting close-on-exec on other
command lines

With:
	func 3>whatever

fd 3 (anything > 2) got close on exec set.   That makes no difference
to the function itself (nothing gets exec'd therefore nothing gets closed)
but does to any exec that might happen running a command within the function.

I believe that if this is done (just as if "func" was a regular command,
and not a function) such open fds should be passed through to anything
they exec - unless the function (or other command) takes care to close the
fd passed to it, or explicitly turn on close-on exec.

I expect this usage to be quite rare, and not make much practical difference.

The same applies do builtin commands, but is even less relevant there, eg:

	printf 3>whatever

would have set close-on-exec on fd 3 for printf.  This is generally
completely immaterial, as printf - and most other built-in commands -
neither uses any fd other than (some of) 0 1 & 2, nor do they exec anything.

That is, except for the "exec" built-in which was the focus of the original
fix (mentioned above) and which should remain fixed here, and for the "."
command.

Because of that last one (".") close-on-exec should not be set on built-in
commands (any of them) for redirections on the command line.   This will
almost never make a difference - any such redirections last only as long
as the built-in command lasts (same with functions) and so will generally
never care about the state of close-on-exec, and I have never seen a use
of the "." command with any redirections other than stderr (which is unaffected
here, fd's <= 2 never get close-on-exec set).   That's probably why no-one
ever noticed.

There are still "fd issues" when running a (non #!) shell script, that
are hard to fix, which we should probably handle the way most other shells
have, by simply abandoning the optimisation of not exec'ing a whole new
shell (#! scripts do that exec) and just doing it that way.   Issues solved!
One day.

Revert the recent change until I can work out how things are broken.

exec builtin command redirection fixes

Several changes, all related to the exec special built in command,
or to close on exec, one way or another.   (Except a few white space
and comment additions, KNF, etc)

1. The bug found by Edgar Fuß reported in:
      http://mail-index.netbsd.org/tech-userlevel/2024/11/05/msg014588.html
   has been fixed, now "exec N>whatever" will set close-on-exec for fd N
   (as do ksh versions, and allowed by POSIX, though other shells do not)
   which has happened now for many years.   But "exec cmd N>whatever"
   (which looks like the same command when redirections are processed)
   which was setting close-on-exec on N, now no longer does, so fd N
   can be passed to cmd as an open fd.

   For anyone who cares, the big block of change just after "case CMDBUILTIN:"
   in evalcommand() in eval.c is the fix for this (one line replaced by
   about 90 ... though most of that is comments or #if 0'd example code
   for later).   It is a bit ugly, and will get worse if our exec command
   ever gets any options, as others have, but it does work.

2. when the exec builtin utility is used to alter the shell's redirections
   it is now "all or nothing".   Previously the redirections were executed
   left to right.  If one failed, no more were attempted, but the earlier
   ones remained.   This makes no practical difference to a non-interactive
   shell, as a redirection error causes that shell to exit, but it makes
   a difference to interactive shells.   Now if a redirection fails, any
   earlier ones which had been performed are undone.   Note however that
   side-effects of redirections (like creating, or truncating, files in
   the filesystem, cannot be reversed - just the shell's file descriptors
   returned to how they were before the error).

   Similarly usage errors on exec now exist .. our exec takes no options
   (but does handle "--" as POSIX says it must - has done for ages).
   Until now, that was the only magic piece of exec, running
	exec -a name somecommand
   (which several other shells support) would attempt to exec the "-a"
   command, and most likely fail, causing immediate exit from the shell.
   Now that is a usage error - a non-interactive shell still exits, as
   exec is a special builtin, and any error from a special builtin causes
   a non-interactive shell to exit.   But now, an interactive shell will
   no longer exit (and any redirections that were on the command will be
   undone, the same as for a redirection error).

3. When a "close on exec" file descriptor is temporarily saved, so the
   same fd can be redirected for another command (only built-in commands
   and functions matter, redirects for file system commands happen after
   a fork() and at that stage if anything goes wrong, the child simply
   exits - but for non-forking commands, doing something like printf >file
   required the previous stdout to be saved elsewhere, "file" opened to
   be the new stdout, then when printf is finished, the old stdout moved
   back.   Anyway, if the fd being moved had close on exec set, then
   when it was moved back, the close on exec was lost.  That is now fixed.

4. The fdflags command no longer allows setting close on exec on stdin,
   stdout, or stderr - POSIX requires that those 3 fd's always be open
   (to something) when any normal command is invoked.  With close-on-exec
   set on one of these, that is impossible, so simply refuse it (when
   "exec N>file" sets close on exec, it only does it for N>2).

Minor changes (should be invisible)

a. The shell now keeps track of the highest fd number it sees doing
   normal operations (there are a few internal pipe() calls that aren't
   monitored and a couple of others, but in general the shell will now
   know the highest fd it ever saw allocated to it).  This is mostly
   for debugging.

b. calls to fcntl() passing an int as the "arg" are now all properly
   cast to the void * that the fcntl kernel is expecting to receive.
   I suspect that makes no actual difference to anything, but ...

Improve the solution for the 2nd access to a fd which shouldn't
be available ("13") issue reported by Jan Schaumann on netbsd-users.

This fixes a bug in the earlier fix (a day or so ago) which could allow the
shell's idea of which fd range was in use by the script to get wildly
incorrect, but now also actually looks to see which fd's are in use as
renamed other user fd's during the lifetime of a redirection which needs
to be able to be undone (most redirections occur after a fork and are
permanent in the child process).   Attempting to access such a fd (as with
attempts to access a fd in use by the shell for its own purposes) is treated
as an attempt to access a closed fd (EBADF).  Attempting to reuse the fd
for some other purpose (which should be rare, even for scripts attempting
to cause problems, since the shell generally knows which fds the script
wants to use, and avoids them) will cause the renamed (renumbered) fd
to be renamed again (moved aside to some other available fd), just as
happens with the shell's private fds.

Also, when a generic fd is required, don't give up because of EMFILE
or similar unless there are no available fds at all (we might prefer >10
or bigger, but if there are none there, use anything).  This avoids
redirection errors when ulimit -n has been set small, and all the fds >10
that are available have been used, but we need somewhere to park the old
user of a fd while we reuse that fd for the redirection.

Ooops, restore accidently removed files from merge mishap

Sync with HEAD

Merge changes from current as of 20200406

Don't define max_user_fd in the header.

Pull up following revision(s) (requested by kre in ticket #103):
	bin/kill/kill.c: 1.28
	bin/sh/Makefile: 1.111-1.113
	bin/sh/arith_token.c: 1.5
	bin/sh/arith_tokens.h: 1.2
	bin/sh/arithmetic.c: 1.3
	bin/sh/arithmetic.h: 1.2
	bin/sh/bltin/bltin.h: 1.15
	bin/sh/cd.c: 1.49-1.50
	bin/sh/error.c: 1.40
	bin/sh/eval.c: 1.142-1.151
	bin/sh/exec.c: 1.49-1.51
	bin/sh/exec.h: 1.26
	bin/sh/expand.c: 1.113-1.119
	bin/sh/expand.h: 1.23
	bin/sh/histedit.c: 1.49-1.52
	bin/sh/input.c: 1.57-1.60
	bin/sh/input.h: 1.19-1.20
	bin/sh/jobs.c: 1.86-1.87
	bin/sh/main.c: 1.71-1.72
	bin/sh/memalloc.c: 1.30
	bin/sh/memalloc.h: 1.17
	bin/sh/mknodenames.sh: 1.4
	bin/sh/mkoptions.sh: 1.3-1.4
	bin/sh/myhistedit.h: 1.12-1.13
	bin/sh/nodetypes: 1.16-1.18
	bin/sh/option.list: 1.3-1.5
	bin/sh/parser.c: 1.133-1.141
	bin/sh/parser.h: 1.22-1.23
	bin/sh/redir.c: 1.58
	bin/sh/redir.h: 1.24
	bin/sh/sh.1: 1.149-1.159
	bin/sh/shell.h: 1.24
	bin/sh/show.c: 1.43-1.47
	bin/sh/show.h: 1.11
	bin/sh/syntax.c: 1.4
	bin/sh/syntax.h: 1.8
	bin/sh/trap.c: 1.41
	bin/sh/var.c: 1.56-1.65
	bin/sh/var.h: 1.29-1.35
An initial attempt at implementing LINENO to meet the specs.
Aside from one problem (not too hard to fix if it was ever needed) this version
does about as well as most other shell implementations when expanding
$((LINENO)) and better for ${LINENO} as it retains the "LINENO hack" for the
latter, and that is very accurate.
Unfortunately that means that ${LINENO} and $((LINENO)) do not always produce
the same value when used on the same line (a defect that other shells do not
share - aside from the FreeBSD sh as it is today, where only the LINENO hack
exists and so (like for us before this commit) $((LINENO)) is always either
0, or at least whatever value was last set, perhaps by
	LINENO=${LINENO}
which does actually work ... for that one line...)
This could be corrected by simply removing the LINENO hack (look for the string
LINENO in parser.c) in which case ${LINENO} and $((LINENO)) would give the
same (not perfectly accurate) values, as do most other shells.
POSIX requires that LINENO be set before each command, and this implementation
does that fairly literally - except that we only bother before the commands
which actually expand words (for, case and simple commands).   Unfortunately
this forgot that expansions also occur in redirects, and the other compound
commands can also have redirects, so if a redirect on one of the other compound
commands wants to use the value of $((LINENO)) as a part of a generated file
name, then it will get an incorrect value.  This is the "one problem" above.
(Because the LINENO hack is still enabled, using ${LINENO} works.)
This could be fixed, but as this version of the LINENO implementation is just
for reference purposes (it will be superseded within minutes by a better one)
I won't bother.  However should anyone else decide that this is a better choice
(it is probably a smaller implementation, in terms of code & data space then
the replacement, but also I would expect, slower, and definitely less accurate)
this defect is something to bear in mind, and fix.
This version retains the *BSD historical practice that line numbers in functions
(all functions) count from 1 from the start of the function, and elsewhere,
start from 1 from where the shell started reading the input file/stream in
question.  In an "eval" expression the line number starts at the line of the
"eval" (and then increases if the input is a multi-line string).
Note: this version is not documented (beyond as much as LINENO was before)
hence this slightly longer than usual commit message.
A better LINENO implementation.   This version deletes (well, #if 0's out)
the LINENO hack, and uses the LINENO var for both ${LINENO} and $((LINENO)).
(Code to invert the LINENO hack when required, like when de-compiling the
execution tree to provide the "jobs" command strings, is still included,
that can be deleted when the LINENO hack is completely removed - look for
refs to VSLINENO throughout the code.  The var funclinno in parser.c can
also be removed, it is used only for the LINENO hack.)
This version produces accurate results: $((LINENO)) was made as accurate
as the LINENO hack made ${LINENO} which is very good.  That's why the
LINENO hack is not yet completely removed, so it can be easily re-enabled.
If you can tell the difference when it is in use, or not in use, then
something has broken (or I managed to miss a case somewhere.)
The way that LINENO works is documented in its own (new) section in the
man page, so nothing more about that, or the new options, etc, here.
This version introduces the possibility of having a "reference" function
associated with a variable, which gets called whenever the value of the
variable is required (that's what implements LINENO).  There is just
one function pointer however, so any particular variable gets at most
one of the set function (as used for PATH, etc) or the reference function.
The VFUNCREF bit in the var flags indicates which func the variable in
question uses (if any - the func ptr, as before, can be NULL).
I would not call the results of this perfect yet, but it is close.
Unbreak (at least) i386 build .... I have no idea why this built for me on
amd64 (problem was missing prototype for snprintf witout <stdio.h>)
While here, add some (DEBUG mode only) tracing that proved useful in
solving another problem.
Set the line number before expanding args, not after.   As the line_number
would have usually been set earlier, this change is mostly an effective
no-op, but it is better this way (just in case) - not observed to have
caused any problems.
Undo some over agressive fixes for a (pre-commit) bug that did not
need these changes to be fixed - and these cause problems in another
absurd use case.   Either of these issues is unlikely to be seen by
anyone who isn't an idiot masochist...
PR bin/52280
removescapes_nl in expari() even when not quoted,
CRTNONL's appear regardless of quoting (unlike CTLESC).
New sentence, new line. Whitespace.
Improve the (new) LINENO section, markup changes (with thanks to wiz@ for
assistace) and some better wording in a few placed.
I am an idiot...  revert the previous unintended commit.
Remove some left over baggage from the LINENO v1 implementation that
didn't get removed with v2, and should have.   This would have had
(I think, without having tested it) one very minor effect on the way
LINENO worked in the v2 implementation, but my guess is it would have
taken a long time before anyone noticed...
Correct spelling in comments of DEBUG only code...
(Perhaps) temporary fix to pkgtools (cwrappers) build (configure).
Expanding  `` containing \ \n sequences looks to have been giving
problems.   I don't think this is the correct fix, but it will do
no worse harm than (perhaps) incorrectly calculating LINENO in this
kind of (rare) circumstance.   I'll look and see if there should be
a better fix later.
s/volatile/const/ -- wonderful how opposites attract like this.
NFC (normal use) - DEBUG only change, when showing empty arg list don't
omit terminating \n.
Free stack memory in a couple of obscure cases where it wasn't
being done (one in probably dead code that is never compiled, the other
in a very rare error case.)   Since it is stack memory it wasn't lost
in any case, just held longer than needed.
Many internal memory management type fixes.
PR bin/52302   (core dump with interactive shell, here doc and error
on same line) is fixed.   (An old bug.)
echo "$( echo x; for a in $( seq 1000 ); do printf '%s\n'; done; echo y )"
consistently prints 1002 lines (x, 1000 empty ones, then y) as it should
(And you don't want to know what it did before, or why.) (Another old one.)
(Recently added) Problems with ~ expansion fixed (mem management related).
Proper fix for the cwrappers configure problem (which includes the quick
fix that was done earlier, but extends upon that to be correct). (This was
another newly added problem.)
And the really devious (and rare) old bug - if STACKSTRNUL() needs to
allocate a new buffer in which to store the \0, calculate the size of
the string space remaining correctly, unlike when SPUTC() grows the
buffer, there is no actual data being stored in the STACKSTRNUL()
case - the string space remaining was calculated as one byte too few.
That would be harmless, unless the next buffer also filled, in which
case it was assumed that it was really full, not one byte less, meaning
one junk char (a nul, or anything) was being copied into the next (even
bigger buffer) corrupting the data.
Consistent use of stalloc() to allocate a new block of (stack) memory,
and grabstackstr() to claim a block of (stack) memory that had already
been occupied but not claimed as in use.  Since grabstackstr is implemented
as just a call to stalloc() this is a no-op change in practice, but makes
it much easier to comprehend what is really happening.  Previous code
sometimes used stalloc() when the use case was really for grabstackstr().
Change grabstackstr() to actually use the arg passed to it, instead of
(not much better than) guessing how much space to claim,
More care when using unstalloc()/ungrabstackstr() to return space, and in
particular when the stack must be returned to its previous state, rather than
just returning no-longer needed space, neither of those work.  They also don't
work properly if there have been (really, even might have been) any stack mem
allocations since the last stalloc()/grabstackstr().   (If we know there
cannot have been then the alloc/release sequence is kind of pointless.)
To work correctly in general we must use setstackmark()/popstackmark() so
do that when needed.  Have those also save/restore the top of stack string
space remaining.
	[Aside: for those reading this, the "stack" mentioned is not
	in any way related to the thing used for maintaining the C
	function call state, ie: the "stack segment" of the program,
	but the shell's internal memory management strategy.]
More comments to better explain what is happening in some cases.
Also cleaned up some hopelessly broken DEBUG mode data that were
recently added (no effect on anyone but the poor semi-human attempting
to make sense of it...).
User visible changes:
Proper counting of line numbers when a here document is delimited
by a multi-line end-delimiter, as in
	cat << 'REALLY
	END'
	here doc line 1
	here doc line 2
	REALLY
	END
(which is an obscure case, but nothing says should not work.)  The \n
in the end-delimiter of the here doc (the last one) was not incrementing
the line number, which from that point on in the script would be 1 too
low (or more, for end-delimiters with more than one \n in them.)
With tilde expansion:
	unset HOME; echo ~
changed to return getpwuid(getuid())->pw_home instead of failing (returning ~)
POSIX says this is unspecified, which makes it difficult for a script to
compensate for being run without HOME set (as in env -i sh script), so
while not able to be used portably, this seems like a useful extension
(and is implemented the same way by some other shells).
Further, with
	HOME=; printf %s ~
we now write nothing (which is required by POSIX - which requires ~ to
expand to the value of $HOME if it is set) previously if $HOME (in this
case) or a user's directory in the passwd file (for ~user) were a null
STRING, We failed the ~ expansion and left behind '~' or '~user'.
Changed the long name for the -L option from lineno_fn_relative
to local_lineno as the latter seemed to be marginally more popular,
and perhaps more importantly, is the same length as the peviously
existing quietprofile option, which means the man page indentation
for the list of options can return to (about) what it was before...
(That is, less indented, which means more data/line, which means less
lines of man page - a good thing!)
Cosmetic changes to variable flags - make their values more suited
to my delicate sensibilities...  (NFC).
Arrange not to barf (ever) if some turkey makes _ readonly.  Do this
by adding a VNOERROR flag that causes errors in var setting to be
ignored (intended use is only for internal shell var setting, like of "_").
(nb: invalid var name errors ignore this flag, but those should never
occur on a var set by the shell itself.)
From FreeBSD: don't simply discard memory if a variable is not set for
any reason (including because it is readonly) if the var's value had
been malloc'd.  Free it instead...
NFC - DEBUG changes, update this to new TRACE method.
KNF - white space and comment formatting.
NFC - DEBUG mode only change - convert this to the new TRACE() format.
NFC - DEBUG mode only change - complete a change made earlier (marking
the line number when included in the trace line tag to show whether it
comes from the parser, or the elsewhere as they tend to be quite different).
Initially only one case was changed, while I pondered whether I liked it
or not.  Now it is all done...   Also when there is a line tag at all,
always include the root/sub-shell indicator character, not only when the
pid is included.
NFC: DEBUG related comment change - catch up with reality.
NFC: DEBUG mode only change.  Fix botched cleanup of one TRACE().
"b" more forgiving when sorting options to allow reasonable (and intended)
flexibility in option.list format.   Changes nothing for current option.list.
Now that excessive use of STACKSTRNUL has served its purpose (well, accidental
purpose) in exposing the bug in its implementation, go back to not using
it when not needed for DEBUG TRACE purposes.   This change should have no
practical effect on either a DEBUG shell (where the STACKSTRNUL() calls
remain) or a non DEBUG shell where they are not needed.
Correct the initial line number used for processing -c arg strings.
(It was inheriting the value from end of profile file processing) - I didn't
notice before as I usually test with empty or no profile files to avoid
complications.   Trivial change which should have very limited impact.
Fix from FreeBSD (applied there in July 2008...)
Don't dump core with input like sh -c 'x=; echo >&$x' - that is where
the word after a >& or <& redirect expands to nothing at all.
Another fix from FreeBSD (this one from April 2009).
When processing a string (as in eval, trap, or sh -c) don't allow
trailing \n's to destroy the exit status of the last command executed.
That is:
	sh -c 'false
	'
	echo $?
should produce 1, not 0.
It is amazing what nonsense appears to work sometimes... (all my nonsense too!)
Two bugs here, one benign because of the way the script is used.
The other hidden by NetBSD's sort being stable, and the data not really
requiring sorting at all...
So as it happens these fixes change nothing, but they are needed anyway.
(The contents of the generated file are only used in DEBUG shells, so
this is really even less important than it seems.)
Another ancient (highly improbable) bug bites the dust.   This one
caused by incorrect macro usage (ie: using the wrong one) which has
been in the sources since version 1.1 (ie: forever).
Like the previous (STACKSTRNUL) bug, the probability of this one
actually occurring has been infinitesimal but the LINENO code increases
that to infinitesimal and a smidgen... (or a few, depending upon usage).
Still, apparently that was enough, Kamil Rytarowski discovered that the
zsh configure script (damn competition!) managed to trigger this problem.
source .editrc after we initialize so that commands persist!
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by
parsing the way getopt(3) would, if only it could handle the (required)
-signumber and -signame options.  This adds two "features" to kill,
-ssigname and -lstatus now work (ie: one word with all of the '-', the
option letter, and its value) and "--" also now works (kill -- -pid1 pid2
will not attempt to send the pid1 signal to pid2, but rather SIGTERM
to the pid1 process group and pid2).  It is still the case that (apart
from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.)
Note that we now have an ambiguity, -sname might mean "-s name" or
send the signal "sname" - if one of those turns out to be valid, that
will be accepted, otherwise the error message will indicate that "sname"
is not a valid signal name, not that "name" is not.   Keeping the "-s"
and signal name as separate words avoids this issue.
Also caution: should someone be weird enough to define a new signal
name (as in the part after SIG) which is almost the same name as an
existing name that starts with 'S' by adding an extra 'S' prepended
(eg: adding a SIGSSYS) then the ambiguity problem becomes much worse.
In that case "kill -ssys" will be resolved in favour of the "-s"
flag being used (the more modern syntax) and would send a SIGSYS, rather
that a SIGSSYS.    So don't do that.
While here, switch to using signalname(3) (bye bye NSIG, et. al.), add
some constipation, and show a little pride in formatting the signal names
for "kill -l" (and in the usage when appropriate -- same routine.)   Respect
COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width,
not number of columns to print) for kill -l, a very small value for COLUMNS
will cause kill -l output to list signals one per line, a very large
value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l")
TODO: the signal printing for "trap -l" and that for "kill -l"
should be switched to use a common routine (for the sh builtin versions.)
All changes of relevance here are to bin/kill - the (minor) changes to bin/sh
are only to properly expose the builtin version of getenv(3) so the builtin
version of kill can use it (ie: make its prototype available.)
Properly support EDITRC - use it as (naming) the file when setting
up libedit, and re-do the config whenever EDITRC is set.
Get rid of workarounds for ancient groff html backend.
Simplify macro usage.
Make one example more like a real world possibility (it still isn't, but
is closer) - though the actual content is irrelevant to the point being made.
Add literal prompt support this allows one to do:
CA="$(printf '\1')"
PS1="${CA}$(tput bold)${CA}\$${CA}$(tput sgr0)${CA} "
Now libedit supports embedded mode switch sequence, improve sh
support for them (adds PSlit variable to set the magic character).
NFC: DEBUG only change - provide an externally visible (to the DEBUG sh
internals) interface to one of the internal (private to trace code) functions
Include redirections in trace output from "set -x"
Implement PS1, PS2 and PS4 expansions (variable expansions, arithmetic
expansions, and if enabled by the promptcmds option, command substitutions.)
Implement a bunch of new shell environment variables. many mostly useful
in prompts when expanded at prompt time, but all available for general use.
Many of the new ones are not available in SMALL shells (they work as normal
if assigned, but the shell does not set or use them - and there is no magic
in a SMALL shell (usually for install media.))
Omnibus manual update for prompt expansions and new variables.  Throw in
some random cleanups as a bonus.
Correct a markup typo (why did I not see this before the prev commit??)
Sort options (our default is 0..9AaBbZz).
Fix markup problems and a typo.
Make $- list flags in the same order they appear in sh(1)
Do a better job of detecting the error in pkgsrc/devel/libbson-1.6.3's
configure script, ie: $(( which is intended to be a sub-shell in a
command substitution, but is an arith subst instead, it needs to be
written $( ( to do as intended.   Instead of just blindly carrying on to
find the missing )) somewhere, anywhere, give up as soon as we have seen
an unbalanced ')' that isn't immediately followed by another ')' which
in a valid arith subst it always would be.
While here, there has been a comment in the code for quite a while noting a
difference in the standard between the text descr & grammar when it comes to
the syntax of case statements.   Add more comments to explain why parsing it
as we do is in fact definitely the correct way (ie: the grammar wins arguments
like this...).
DEBUG and white space changes only.   Convert TRACE() calls for DEBUg mode
to the new style.   NFC (when not debugging sh).
Mostly DEBUG and white space changes.   Convert DEEBUG TRACE() calls to
the new format.   Also #if 0 a function definition that is used nowhere.
While here, change the function of pushfile() slightly - it now sets
the buf pointer in the top (new) input descriptor to NULL, instead of
simply leaving it - code that needs a buffer always (before and after)
must malloc() one and assign it after the call.  But code which does not
(which will be reading from a string or similar) now does not have to
explicitly set it to NULL (cleaner interface.)   NFC intended (or observed.)
DEBUG changes: convert DEBUG TRACE() calls to new format.
ALso, cause exec failures to always cause the shell to exit with
status 126 or 127, whatever the cause.  127 is intended for lookup
failures (and is used that way), 126 is used for anything else that
goes wrong (as in several other shells.)  We no longer use 2 (more easily
confused with an exit status of the command exec'd) for shell exec failures.
DEBUG only changes.  Convert the TRACE() calls in the remaining files
that still used it to the new format.   NFC.
Fix a reference after free (and consequent nonsense diagnostic for
attempts to set readonly variables) I added in 1.60 by incompletely
copying the FreeBSD fix for the lost memory issue.

Include redirections in trace output from "set -x"

Sync with HEAD - tag prg-localcount2-base1

Keep track of which file descriptors the shell is using for its
own purposes, and move them elsewhere whenever a user redirection
happens to pick the same number.   With this we can move the shell
file descriptors back to lower values (be slightly kinder to the kernel)
since we can no longer clash.   (Also get rid of a little old unneeded code.)

This also completes the fdflags command, which no longer permits access
to (by way or either obtaining, or changing) the shell's internal fds.

Sync with HEAD

Keep track of the biggest fd used by, or available to, the user/script
and use that to control which fd's are examined by a (bare) fdflags
(with no fd args).

Usually this will mean that fdflags will no longer show the shell's
internal use fds, only user fds.

This is only a partial fix however, a user can easily discover the
shell's fd usage (eg: using fstat) and can then still use fdflags to
manipulate those fds (or even send output to them).

The shell needs to monitor its own fd usage better, and keep out of
the way of user fds - coming sometime later...

More work on file descriptors...   This is the copyfd() cleanup.
copyfd() duplicates file descriptors - it used to be widely used,
but these days has seen its popularity dwindle.   Strip it of an
option that ceased to be variable (simplifying code) and cause all
its users to check its result, so it does not need to handle errors
itself (simplifying code further), and make it become a private inernal
routine in redir.c (all callers from other places have switched to a
more modern interface.)  Make sure we error() if N>&N fails (if N is closed.)

Remove unnecessary extern var declaration that was a
remnant of an earlier version of the previous (fd>10) fixes.

ok christos@

Fix handing of user file descriptors outside the 0..9 range.
Also, move (most of) the shell's internal use fd's to much
higher values (depending upon what ulimit -n allows) so they
are less likely to clash with user supplied fd numbers.  A future
patch will (hopefully) avoid this problem completely by dynamically
moving the shell's internal fds around as needed. (From kre@)

Don't close-on-exec redirections created explicitly for the command being
ran; i.e. we want this to work:
	$ cat succ1
	#!/bin/sh
	./succ2 6>out

	$ cat succ2
	#!/bin/sh
	echo succ2 >&6

	$ ./succ1

And this to fail:
	$ cat fail1
	#!/bin/sh
	exec 6> out
	echo "fail1" >&6
	./fail2
	exec 6>&-

	$ cat fail2
	#!obj.amd64/sh
	echo "fail2" >&6

	$ ./fail1
	./fail2: 6: Bad file descriptor

XXX: Do we want a -k (keep flag on exec to make redirections not close-on-exec?

Don't leak redirected rescriptors to exec'ed processes. This is what ksh
does, but bash does not. For example:

    $ cat test1
    #!/bin/sh
    exec 6> out
    echo "test" >&6
    sh ./test2
    exec 6>&-
    $ cat test2
    echo "test2" >&6
    $ ./test1
    ./test2: 6: Bad file descriptor

This fixes by side effect the problem of the rc system leaking file descriptors
7 and 8 to all starting daemons:

    $ fstat -p 1359
    USER     CMD          PID   FD MOUNT       INUM MODE         SZ|DV R/W
    root     powerd      1359   wd /              2 drwxr-xr-x     512 r
    root     powerd      1359    0 /          63029 crw-rw-rw-    null rw
    root     powerd      1359    1 /          63029 crw-rw-rw-    null rw
    root     powerd      1359    2 /          63029 crw-rw-rw-    null rw
    root     powerd      1359    3* kqueue pending 0
    root     powerd      1359    4 /          64463 crw-r-----   power r
    root     powerd      1359    7 flags 0x80034<ISTTY,MPSAFE,LOCKSWORK,CLEAN>
    root     powerd      1359    8 flags 0x80034<ISTTY,MPSAFE,LOCKSWORK,CLEAN>
    root     powerd      1359    9* pipe 0xfffffe815d7bfdc0 -> 0x0 w

Note fd=7,8 pointing to the revoked pty from the parent rc process.

Sync with HEAD

Tell copyfd if the caller wants the exact tofd to just fd >= tofd.
Fixes "echo foo > /rump/bar" in a rump hijacked shell.

reviewed by christos

Move UCB-licensed code from 4-clause to 3-clause licence.

Patches provided by Joel Baker in PR 22249, verified by myself.

Fixes from David Laight:
- ansification
- format of output of jobs command (etc)
- job identiers %+, %- etc
- $? and $(...)
- correct quoting of output of set, export -p and readonly -p
- differentiation between nornal and 'posix special' builtins
- correct behaviour (posix) for errors on builtins and special builtins
- builtin printf and kill
- set -o debug (if compiled with DEBUG)
- cd src obj (as ksh - too useful to do without)
- unset -e name, remove non-readonly variable from export list.
  (so I could unset -e PS1 before running the test shell...)

VFork()ing shell: From elric@netbsd.org:
Plus my changes:
	- walking process group fix in foregrounding a job.
	- reset of process group in parent shell if interrupted before the wait.
	- move INTON lower in the dowait so that the job structure is
	  consistent.
	- error check all setpgid(), tcsetpgrp() calls.
	- eliminate unneeded strpgid() call.
	- check that we don't belong in the process group before we try to
	  set it.

Doing the vfork work on ash on a branch to try to shake out the
problems before I expose everyone to them.  This checkin represents
a merge of the prior work, which I backed out a while ago, to the
HEAD only and does not incorporate any additional bugfixes.  The
additional bugfixes and code-cleanup will occur in later checkins.

For reference the patches that were used are:
cvs diff -kk -r1.51 -r1.55 eval.c  | patch
cvs diff -kk -r1.27 -r1.28 exec.c  | patch
cvs diff -kk -r1.15 -r1.16 exec.h  | patch
cvs diff -kk -r1.32 -r1.33 input.c | patch
cvs diff -kk -r1.10 -r1.11 input.h | patch
cvs diff -kk -r1.32 -r1.35 jobs.c  | patch
cvs diff -kk -r1.9  -r1.11 jobs.h  | patch
cvs diff -kk -r1.36 -r1.37 main.c  | patch
cvs diff -kk -r1.20 -r1.21 redir.c | patch
cvs diff -kk -r1.10 -r1.11 redir.h | patch
cvs diff -kk -r1.10 -r1.12 shell.h | patch
cvs diff -kk -r1.22 -r1.23 trap.c  | patch
cvs diff -kk -r1.12 -r1.13 trap.h  | patch
cvs diff -kk -r1.23 -r1.24 var.c   | patch
cvs diff -kk -r1.16 -r1.17 var.h   | patch

All other changes were simply the resolution of the resulting
conflicts, which occured only in the merge of jobs.c.

Begins to address PR: bin/5475

Back out previous vfork changes.

Now we use vfork(2) instead of fork(2) when we can.

Update /bin/sh from trunk per request of Christos Zoulas.  Fixes
many bugs.

PR/2808: Remove trailing whitespace (from FreeBSD)

Merge in my changes from vangogh, and fix the x=`false`; echo $? == 0
bug.

convert to new RCS id conventions.

Add RCS ids.

sync with 4.4lite

44lite code

Add RCS identifiers.

Jim "wilson@moria.cygnus.com" Wilson's patches to make C News (and other
things) work.

changed "Id" to "Header" for rcsids

added rcs ids to all files

initial import of 386bsd-0.1 sources

Initial revision