[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Annotation of src/UPDATING, Revision 1.89

1.89    ! christos    1: $NetBSD: UPDATING,v 1.88 2003/04/30 07:23:49 itojun Exp $
1.1       abs         2:
                      3: This file is intended to be a brief introduction to the build
                      4: process and a reference on what to do if something doesn't work.
                      5:
                      6: For a more detailed description see Makefile.
                      7:
                      8: Recent changes:
                      9: ^^^^^^^^^^^^^^^
1.89    ! christos   10:
        !            11: 20030516:
        !            12:        Due to bugs in the export handling code, invalid export lines
        !            13:        were accepted before and caused the kernel to panic when
        !            14:        mountd got restarted because it freed memory that had already
        !            15:        been freed. This has been fixed and the kernel checks
        !            16:        export addresses very strictly. If you upgrade your kernel,
        !            17:        make sure you also upgrade mountd, because if your export
        !            18:        file contains lines with an old inet4 address syntax (i.e.
        !            19:        a.b.c or a.b or a), they will get rejected by the new kernel.
1.87      bjh21      20:
                     21: 20030402:
                     22:        The superblock layout for FFS was changed.  If you have 1.6
                     23:        fsck binaries, they will signal a fatal superblock mismatch
                     24:        with the first alternate, because they compare too many
                     25:        fields (even ones that aren't useful).  If possible, upgrade
                     26:        your fsck_ffs binary before using a new kernel.
                     27:        None of this signals actual filesystem damage.
1.85      atatat     28:
                     29: 20030324:
                     30:        sendmail version 8.12.8 was imported.  Since sendmail is
                     31:        now setgid to the smmsp group, and runs in "collection"
                     32:        mode for most common activities, there is a new config
                     33:        file called submit.cf that needs to live in /etc/mail.
                     34:        The generic submit.cf sample in /usr/share/sendmail/cf
                     35:        is named netbsd-msp.cf.  Upgrading your regular sendmail
                     36:        configuration file is also strongly advised.
                     37:
                     38:        See the section named "MESSAGE SUBMISSION PROGRAM" in
                     39:        the updated /usr/share/sendmail/README file for more
                     40:        information.
1.82      wiz        41:
                     42: 20030117:
                     43:        Texinfo was updated to 4.3.  To avoid failures when trying to
                     44:        build the included texinfo files, do:
                     45:
                     46:        cd src/gnu/usr.bin/texinfo
                     47:        make MKINFO=no dependall install
1.81      lukem      48:
                     49: 20021223:
                     50:        The METALOG format changed slightly, to remove the leading
                     51:        "${DESTDIR}" from path names.
                     52:        This only affects people building with UNPRIVED.
                     53:        For complete safety, remove the DESTDIR entirely and
                     54:        update tools/mtree, before running make build.
1.88      itojun     55:
                     56: 20021219:
                     57:        CVS repository layout was changed.  See the following for details
                     58:        if you are using (anonymous) cvs to update your tree.
                     59:
                     60:        http://mail-index.netbsd.org/netbsd-announce/2002/12/19/0000.html
1.80      lukem      61:
                     62: 20021219:
                     63:        install(1) had a '-N dbdir' option added, to specify an
                     64:        alternate location to look up users & groups (instead
                     65:        of the host system passwd(5) and group(5) databases).
                     66:
                     67:        The build system was modified to take advantage of
                     68:        this option (using ${NETBSDSRCDIR}/etc), so if you
1.83      kei        69:        use USETOOLS==no, you may have to rebuild and
1.80      lukem      70:        reinstall usr.bin/xinstall first.
1.78      lukem      71:
                     72: 20021130:
                     73:        fparseln(3) moved from libutil to libc.
                     74:        If building to DESTDIR=/, reinstall the includes
                     75:        and rebuild libc:
                     76:                make includes
                     77:                make do-lib-libc
                     78:        If using build.sh, "cd tools/compat && make clean"
                     79:        before rebuilding the tools.
1.77      lukem      80:
                     81: 20021126:
                     82:        The mk.conf(5) variable SYS_INCLUDE has been deprecated,
                     83:        including the optional "SYS_INCLUDE=symlinks" support.
                     84:        All header files, including <sys/*.h> are copied into
                     85:        /usr/include.
1.76      thorpej    86:
                     87: 20021121:
                     88:        The C run-time support files crtbegin.o and crtend.o
                     89:        (and their companions crtbeginS.o and crtendS.o) were
                     90:        split up, with new crti.o and crtn.o files resulting.
                     91:        This means that libtool needs to be rebuilt once the
                     92:        new libraries are installed.  The process of rebuilding
                     93:        libtool will cause it to automatically notice the new
                     94:        required files, but it *must* be rebuilt in order to
                     95:        do this.
                     96:
                     97:        An out-of-date libtool will result in shared libraries
                     98:        which lack _init() and _fini() routines, which means that
                     99:        their global contructors/destructors will not be invoked.
1.75      thorpej   100:
                    101: 20021121:
                    102:        A bug related to how ARM ELF objects were tagged has been
                    103:        corrected.
                    104:
                    105:        NetBSD ARM ELF uses the soft-VFP floating point model by
                    106:        default.  However, the assembler lacked support for marking
                    107:        objects as using the VFP floating point format, and the
1.79      wiz       108:        compiler was not properly passing the flag indicating "soft-VFP"
1.75      thorpej   109:        to the assembler.
                    110:
                    111:        Unfortunately, this means that the linker will now consider
                    112:        old (i.e. not marked "softvfp") NetBSD ARM ELF objects to be
                    113:        incompatible with new (properly marked) objects.
                    114:
                    115:        The problem will only manifest itself if you attempt to compile
                    116:        a new program using the fixed toolchain, and link that program
                    117:        against old libraries which do not have the proper "softvfp"
                    118:        markings.  ALL OF YOUR EXISTING BINARIES AND SHARED LIBRARIES
                    119:        WILL CONTINUE TO WORK PROPERLY.
                    120:
                    121:        The only work-around for the problem is to recompile all of
                    122:        the libraries on the system.  The easiest way to do this for
1.79      wiz       123:        system libraries is to install a binary snapshot; they are
1.75      thorpej   124:        generally available on releng.netbsd.org.  Any packages you
                    125:        have installed which supply libraries will have to be recompiled
                    126:        if you wish to link new programs against those libraries.
                    127:
                    128:        If you have questions about this matter, please contact
                    129:        port-arm@netbsd.org.
1.73      provos    130:
                    131: 20021011:
                    132:        Systrace has been improved to support privilege elevation.
                    133:        Updating the kernel requires the userland part of systrace
1.79      wiz       134:        to be rebuilt.
1.72      thorpej   135:
                    136: 20021010:
                    137:        The config(8) grammar was changed to allow options to register
                    138:        dependencies on attributes, as well as other options.  Users
                    139:        must update and reinstall usr.sbin/config before building a new
                    140:        kernel.
1.70      thorpej   141:
                    142: 20021009:
                    143:        A new attribute dependency syntax was introduced to config(8),
                    144:        which is now used by the SCSI configuration description.  Users
1.71      wiz       145:        must update and reinstall usr.sbin/config before building a new
1.70      thorpej   146:        kernel.
1.69      thorpej   147:
                    148: 20021003:
                    149:        Several changes have been made to the autoconfiguration
                    150:        framework.  Users must update and reinstall usr.sbin/config
                    151:        before building a new kernel.
1.74      jschauma  152:
                    153: 20021001:
                    154:        The i386mp branch has been merged.  To compile a kernel, users
                    155:        will need to add the option 'cpu* at mainbus?' to their configuration
                    156:        file.  Multiprocessor kernels will need
                    157:        ioapic*         at mainbus? apid ?
                    158:        options         MULTIPROCESSOR
                    159:        options         COM_MPLOCK
1.68      lukem     160:
                    161: 20020922:
                    162:        MKDYNAMICROOT=yes enabled by default, which means that
                    163:        certain shared libraries are installed into /lib, the shared
                    164:        linker is installed into /libexec, and all programs in /bin
                    165:        and /sbin are dynamically linked.
                    166:        If you do not use "make build", you should ensure that
                    167:        you have the libraries and shared linker in the new locations,
                    168:        with:
                    169:                make do-lib-csu do-lib-libc do-lib do-gnu-lib do-ld.elf_so
1.67      lukem     170:
                    171: 20020917:
                    172:        USE_NEW_TOOLCHAIN has been replaced with:
                    173:            -   TOOLCHAIN_MISSING -- set to "yes" on platforms for which
                    174:                there is no working in-tree toolchain (hppa, ns32k, sh5,
                    175:                x86_64).
                    176:            -   EXTERNAL_TOOLCHAIN -- if defined by the user, points to the
1.79      wiz       177:                root of an external toolchain (e.g. /usr/local/gnu).  This
1.67      lukem     178:                enables the cross-build framework even for TOOLCHAIN_MISSING
                    179:                platforms.
1.66      gehenna   180:
                    181: 20020906:
                    182:        gehenna-devsw has been merged into the trunk. Need to update and
1.79      wiz       183:        reinstall usr.sbin/config before building the kernel.
1.65      lukem     184:
                    185: 20020822:
                    186:        Crunched rescue tools (contents of /bin and /sbin, plus others)
                    187:        are now provided in /rescue.
                    188:
                    189:        To ensure that these are built statically linked (no matter
                    190:        what the setting of LDSTATIC is), use a crunchgen(1) built
                    191:        from sources newer than 20020820 (see the next entry).
                    192:
                    193: 20020820:
                    194:        crunchgen(1) changed to ensure that the generated program
                    195:        is statically linked.
                    196:
                    197:        Solution: update and reinstall usr.bin/crunch
1.84      grant     198:
                    199: 20020605:
                    200:        smmsp user/group has been added for sendmail.
                    201:
                    202:        Add the following into /etc/group:
                    203:
                    204:        smmsp:*:17:
                    205:
                    206:        and the following to /etc/master.passwd (via vipw):
                    207:
                    208:        smmsp:*:17:17::0:0:Sendmail Message Submission Program:/nonexistent:/sbin/nologin
1.61      itojun    209:
                    210: 20020515:
                    211:        sshd user/group has been added.  Need to hand add this in, or sshd
                    212:        will not let you log in (with default, or UsePrivlegeSeparation=yes)
                    213:
                    214:        Add the following into /etc/group:
                    215:
                    216:        sshd:*:16:
                    217:
                    218:        and the following to /etc/master.passwd (via vipw):
                    219:
1.63      enami     220:        sshd:*:16:16::0:0:& pseudo-user:/var/chroot/sshd:/sbin/nologin
1.61      itojun    221:
1.79      wiz       222:        Also /var/chroot/sshd directory needs to be present (digged as part of
                    223:        the build process).
1.60      sommerfe  224:
                    225: 20020426:
                    226:        NBUILDJOBS obsoleted in favor of just using -j.
1.59      lukem     227:
                    228: 20020426:
                    229:        etc/postinstall added, which performs various checks for
                    230:        configuration file updates and changes, and can fix most of
                    231:        the problems identified.
                    232:        This should make it much easier to upgrade a system's
                    233:        configuration from earlier systems (as far back as NetBSD 1.5).
1.56      lukem     234:
                    235: 20020320:
1.79      wiz       236:        <bsd.lib.mk> needs a new install(1) for its "-a cmd" support.
                    237:        Build and install at usr.bin/xinstall before the build.
1.56      lukem     238:
1.55      itojun    239: 20020319:
1.79      wiz       240:        Raw IPv6 socket now makes strict checking for sa_family and sa_len
                    241:        on send(2) operation.  Be sure to have sbin/rtsol and usr.sbin/rtsold
1.55      itojun    242:        newer than November 2001 when you upgrade the kernel.
                    243:
1.54      itojun    244: 20020311:
                    245:        ssh configuration files were moved from /etc to /etc/ssh.  Beware
                    246:        if you restart your machine from remote.  Note that sshd.conf needs
                    247:        to be changed (due to the use of "/etc" inside).
                    248:
                    249: 20020223:
1.53      matt      250:        Users of the VAX port will need to rebuild and install gas
                    251:        so it deal with the now present register prefix used in all
                    252:        the VAX assembly files.
                    253:
1.50      itojun    254: 20020118:
                    255:        ntpd user/group has been added.  Need to hand add this in or builds
                    256:        will break as mtree aborts early.
                    257:
                    258:        Add the following into /etc/group:
                    259:
                    260:        ntpd:*:15:
                    261:
                    262:        and the following to /etc/master.passwd (via vipw):
                    263:
                    264:        ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin
                    265:
1.49      jmc       266: 20011207:
                    267:        If you're attempting to build a snapshot on sparc64 and are getting
                    268:        reloc errors from the toolchain groff binary this means your native
                    269:        toolchain has some broken C++ bits.
                    270:
                    271:        To fix:
                    272:
                    273:        Build a new toolchain (i.e. build.sh -t)
                    274:        Use the new toolchain to build and install natively (i.e. /usr/lib)
                    275:
                    276:        gnu/lib/libgcc
1.51      pooka     277:        gnu/lib/libstdc++
1.49      jmc       278:
                    279:        After this a snapshot will be able to be built.
                    280:
1.47      jmc       281: 20011201:
                    282:        In order for a sparc64 build to work you must have a working awk. If
                    283:        you've built and installed a system with the new toolchain up to this
1.52      wiz       284:        point you do not have a working awk as its ability to do floating
1.47      jmc       285:        point is broken.
                    286:
                    287:        To build:
                    288:
                    289:        remake and install gnu/lib/libgcc
                    290:        remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links
1.48      jmc       291:        against the new libgcc.a)
1.47      jmc       292:
1.46      thorpej   293: 20011128:
                    294:        Kernel config information was changed to use defflag in
                    295:        the various "files" files.  Bug fixes to config(8) are
                    296:        required in order for this to work properly.  Make sure
                    297:        to build and install in usr.sbin/config before attempting
                    298:        to build a new kernel.
                    299:
1.45      yamt      300: 20011030:
                    301:        libc/locale/wcstod.c now needs new lint(1). Update lint(1)
                    302:        before building libc.
1.43      mason     303:
1.44      tv        304: 20011029:
                    305:        The new document BUILDING.mdoc (view with nroff | more, or
                    306:        see pre-generated .txt and .html versions) describes the build
                    307:        procedure in great detail.  BUILDING, and the USE_NEW_TOOLCHAIN
                    308:        build process, are intended in the long run to replace this
                    309:        manual update log.
                    310:
                    311:        Users building a USE_NEW_TOOLCHAIN system should read the
                    312:        BUILDING document for caveats.  Generally, BUILDING supersedes
                    313:        UPDATING for these systems, as tool updating is taken care of
                    314:        by the new build system.
1.42      perry     315:
                    316: 20011028:
                    317:        src/etc/Makefile now needs install to be able to handle
                    318:        symlinks that point to nowhere. A bug in install that
                    319:        prevented this was corrected.
                    320:
                    321:        Solution: update and reinstall usr.bin/xinstall
                    322:        Better Solution: Use the new toolchain and it will just work
                    323:        for you.
1.40      lukem     324:
                    325: 20011006:
                    326:        /etc/mtree/NetBSD.dist has been updated to take advantage of
                    327:        absolute path support added to mtree(8). Older mtree(8)s don't
                    328:        understand the format.
                    329:
                    330:        Solution: update and reinstall usr.sbin/mtree
1.39      jmc       331:
                    332: 20011004:
                    333:        Crunchgen has been updated to work via reach-over makefiles. Updating
                    334:        is suggested before running a snapshot build
1.36      tv        335:
1.35      thorpej   336: 20010915:
                    337:        The new "ubcperf" code committed by Chuck Silvers removed
                    338:        a header file, uvm/uvm_vnode.h.  There may be stale .depend
                    339:        files that still reference this file.
                    340:
                    341:        Solution: "make cleandir && make dependall" in affected
                    342:        directories.
1.31      enami     343:
                    344: 20010803:
                    345:        grep.info is now built from grep.texi using makeinfo.  Since it
                    346:        requires makeinfo v4.0, you need to install new texinfo before
                    347:        building gnu/usr.bin/grep.  To install new texinfo, please follow
                    348:        the instruction described in 20010726 entry.
1.30      enami     349:
1.64      sommerfe  350: 20010803:
1.41      wiz       351:        (i386 only): i386 kernel now uses new instructions like
                    352:         `fxsave' which old gas doesn't understand.  To build the
1.64      sommerfe  353:        kernel successfully, you need to build and install a new toolchain,
                    354:        (i.e., build.sh -t) or  (temporarily) comment out "options I686_CPU"
                    355:        from your kernel configuration until you rebuild your userland.
                    356:        See 20011029 above and BUILDING file in this directory for more information.
                    357:        [updated 20020630 since i386 gas moved when USE_NEW_TOOLCHAIN enabled]
1.29      bjh21     358:
                    359: 20010731:
                    360:        Bootloader update on ELF platforms.  DDB in kernels from before
                    361:        this will be unable to read symbol tables provided by newer
                    362:        bootloaders.
1.27      assar     363:
                    364: 20010726:
                    365:        Texinfo was updated to 4.0.  To avoid failures when trying to
1.28      assar     366:        build the included texinfo files, do:
                    367:
                    368:        cd src/gnu/usr.bin/texinfo
                    369:        make MKINFO=no dependall install
1.25      thorpej   370:
                    371: 20010718:
                    372:        Enabled correct .init/.fini processing in crt0.  The way this
                    373:        was done was to change a -I directive to cc(1), which means
                    374:        make(1) will have a stale dependency (it will be checking the
                    375:        timestamp on the wrong "dot_init.h").
                    376:
                    377:        The symptom you will see is that new programs die with SIGSEGV
                    378:        if you have a stale dependency.
                    379:
                    380:        Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so
                    381:        before starting your build.
1.26      thorpej   382:
                    383: 20010628:
                    384:        A construct was added to uvm_page.h that uncovered a bug
                    385:        in lint(1).  If you get a warning/error about a non-portable
                    386:        bitfield, update your lint(1) before proceeding.
1.21      jmc       387:
                    388: 20010226:
1.22      jmc       389:        Added named user/group to system. Need to hand add this in or builds
1.21      jmc       390:        will break as mtree aborts early.
                    391:
                    392:        To work around add by hand:
                    393:
                    394:        named:*:14:
                    395:
1.22      jmc       396:        to /etc/group and add:
                    397:
                    398:        named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin
                    399:
                    400:        to master.passwd (use vipw for instance if doing by hand).
                    401:
                    402:        Now a make build should progress.
1.18      jmc       403:
                    404: 20010219:
1.52      wiz       405:        get/setprogname() added. Any hostprogs that may use this will need
1.20      jmc       406:         to be bootstrapped manually until the host system is current.
1.18      jmc       407:
                    408:         Known problems: sys/arch/macppc/stand/fixcoff
1.19      cgd       409:                        usr.sbin/config (adding -DMAKE_BOOTSTRAP to
                    410:                          CFLAGS and rebuilding should work)
1.20      jmc       411:                        usr.sbin/mdsetimage - Build a static copy if
                    412:                          building a snapshot before fully bootstrapped.
1.15      christos  413:
                    414: 20010204:
                    415:        prepare the code to compile with stricter gcc flags. in
                    416:        particular start eliminating redundant declarations. Yacc
                    417:        needs to be installed before make build.
1.10      christos  418:
                    419: 20010114:
                    420:        introduce .if commands(target) in make(1). You need to
                    421:        bring everything up-to-date first, then without installing
1.23      tron      422:        anything make and install in usr.bin/make, then proceed
1.10      christos  423:        with make build.
1.9       sommerfe  424:
                    425: 20010101:
                    426:        bsd.subdir.mk committed 20001230 had a bug which caused
                    427:        afterinstall targets to run too soon; update again.
1.8       sommerfe  428:
                    429: 20001230:
                    430:        New share/mk files needed to support .WAIT in SUBDIR variables.
                    431:        If you get make errors,
                    432:                (cd share/mk; make install)
                    433:        Also, PRINTOBJDIR has changed and is now used more heavily.
1.6       ad        434:
                    435: 20001019:
1.7       ad        436:        The `ca' device driver has been replaced by `ld'; although the
1.6       ad        437:        major and minor numbers haven't changed, you should update your /dev
                    438:        directory.
1.1       abs       439:
1.4       itojun    440: 20000929:
                    441:        The following make directives are obsoleted.
                    442:        MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA
                    443:        By default, RSA is built into libcrypto.  IDEA and RC5 will not be
1.16      wiz       444:        built into libcrypto.  By using MKCRYPTO_{RC5,IDEA}, you can build
1.4       itojun    445:        additional library libcrypto_{idea,rc5}.
1.1       abs       446:
                    447:
                    448: Hints for a more successful build:
                    449: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1.2       mrg       450:     Build a new kernel first:
                    451:        This makes sure that any new system calls or features
                    452:           expected by the new userland will be present.  This
                    453:           helps to avoid critical errors when upgrading.
1.1       abs       454:     Use object directories:
                    455:        This helps to keep stale object
                    456:           files from polluting the build if a Makefile "forgets"
                    457:           about one.  It also makes it easier to clean up after
                    458:           a build.  It's also necessary if you want to use the
                    459:           same source tree for multiple machines.
                    460:           To use object directories:
                    461:            a) cd /usr/src ; make cleandir
1.2       mrg       462:            b) Add "OBJMACHINE=yes" to /etc/mk.conf
                    463:            c) Add "MKOBJDIRS=yes" to /etc/mk.conf
1.1       abs       464:            d) cd /usr/src ; make build
1.2       mrg       465:           Note that running "make obj" in a directory will create
                    466:           in obj.$MACHINE directory.
1.1       abs       467:     Build to a DESTDIR:
                    468:        This helps to keep old
                    469:           installed files (especially libraries) from interfering
                    470:           with the new build.
                    471:           To build to a DESTDIR, set the DESTDIR environment
1.2       mrg       472:           variable before running make build.  It should be set to
                    473:           the pathname of an initially empty directory.
1.1       abs       474:           Problems: you might need to update critical utilities
                    475:                without using DESTDIR since nothing is executed
                    476:                from what is installed in DESTDIR.
                    477:                (See critical utils, below)
                    478:     Build often:
                    479:        This keeps critical utilities current enough to not choke
                    480:        on any other part of the source tree that depends on up to
                    481:        date functionality.
                    482:
                    483: What to do if things don't work:
                    484: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    485: When things don't work there is usually a few things that commonly
                    486: should be done.
                    487:     1) make includes
                    488:        This should be done automatically by make build.
                    489:     2)  cd share/mk && make install
                    490:        Again, automatically done by make build.
                    491:
                    492: Failsafe rebuild of a small part of the tree:
                    493: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    494: To make sure you rebuild something correctly you want to do
                    495: something like the following:
                    496:     1)  Make sure the includes and .mk files are up to date.
                    497:     2)  Make sure any program used to build the particular
                    498:        utility is up to date.  (yacc, lex, etc...)
                    499:     3)  cd ...path/to/util...
                    500:        make cleandir
                    501:        rm ...all obj directories...
                    502:        make cleandir                   # yes, again
                    503:        make obj
                    504:        make depend && make
                    505:
                    506: Failsafe rebuild of the entire tree:
                    507: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    508: If you really want to make sure the source tree is clean and
1.2       mrg       509: ready for a build try the following.  Note that sourcing /etc/mk.conf
                    510: (a make(1) Makefile) in this manner is not right, and will not work
                    511: for anyone who uses any make(1) features in /etc/mk.conf.
1.1       abs       512:
                    513: ---cut here---
                    514: #!/bin/sh
                    515: . /etc/mk.conf
                    516:
1.58      lukem     517: if [ -z $NETBSDSRCDIR ] ; then
                    518:     NETBSDSRCDIR=/usr/src
1.1       abs       519: fi
1.58      lukem     520: if [ \! -d $NETBSDSRCDIR ] ; then
1.1       abs       521:     echo Unable to find sources
                    522:     exit 1
                    523: fi
1.58      lukem     524: find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
1.1       abs       525:
                    526: if [ -z $BSDOBJDIR ] ; then
                    527:     BSDOBJDIR=/usr/obj
                    528: fi
                    529: if [ -d $BSDOBJDIR ] ; then
                    530:     rm -rf $BSDOBJDIR
                    531: fi
                    532:
1.58      lukem     533: cd $NETBSDSRCDIR && make cleandir
1.1       abs       534:
                    535: ---cut here---
                    536:
                    537: Critical utilities:
                    538: ^^^^^^^^^^^^^^^^^^^
                    539:        gnu/usr.bin/egcs
1.3       itojun    540:        usr.bin/compile_et
1.1       abs       541:        usr.bin/make
                    542:        usr.bin/yacc
                    543:        usr.bin/lex
1.11      lukem     544:        usr.bin/xlint
1.2       mrg       545:        usr.sbin/config
1.1       abs       546:
1.34      simonb    547: Other problems and possible solutions:
1.1       abs       548: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    549: Symptom:Unreasonable compiler errors.
                    550: Fix:   Rebuild gnu/usr.bin/egcs
                    551:
                    552: Symptom:Complaints involving a Makefile.
1.17      erh       553: Fix:   Rebuild usr.bin/make:
                    554:        cd usr.bin/make && make && make install
                    555:         Or, a failsafe method if that doesn't work:
                    556:        cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
                    557:
1.1       abs       558: Fix:   Make sure .mk files are up to date.
                    559:        cd share/mk && make install
1.2       mrg       560:
                    561: Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
                    562: Fix:   Rebuild usr.sbin/config
1.1       abs       563:
                    564: Symptom:
                    565: Fix:   Rebuild usr.bin/yacc
                    566:
                    567: Symptom:
                    568: Fix:   Rebuild usr.bin/lex
                    569:
                    570: Symptom:
                    571: Fix:   rm /usr/lib/libbfd.a
1.4       itojun    572:
                    573: Symptom:Obsolete intermediate files are used during compilation
                    574: Fix:   Try the following sequence of commands in the directory in question.
                    575:        make cleandir; rm `make print-objdir`; make cleandir; make obj
                    576:        (If you built the tree without "make obj" in the past, obsolete files
                    577:        may remain.  The command tries to clean everything up)
1.5       wiz       578:
                    579: Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type
                    580: Fix:   Rebuild and install usr.bin/menuc
1.12      itojun    581:
                    582: Symptom:mklocale not found during build in share/locale/ctype
                    583: Fix:   Build and install usr.bin/mklocale
1.13      dogcow    584:
1.86      kleink    585: Symptom:undefined reference to `__assert13' or `__unsetenv13'
1.13      dogcow    586: Fix:    Rebuild and install lib/libc
                    587:
1.19      cgd       588: Symptom:usr.sbin/config fails to build.
                    589: Fix:   Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
1.13      dogcow    590:
1.19      cgd       591: Symptom:undefined reference to `getprogname' or `setprogname'
                    592: Fix:    Rebuild and install lib/libc
1.24      abs       593:
                    594: Symptom:lint does not understand the '-X' option
                    595: Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint

CVSweb <webmaster@jp.NetBSD.org>