[BACK]Return to UPDATING CVS log [TXT][DIR] Up to [cvs.NetBSD.org] / src

Annotation of src/UPDATING, Revision 1.206

1.206   ! dholland    1: $NetBSD: UPDATING,v 1.205 2009/11/16 07:39:54 dholland Exp $
1.1       abs         2:
1.123     jmc         3: This file (UPDATING) is intended to be a brief reference to recent
                      4: changes that might cause problems in the build process, and a guide for
                      5: what to do if something doesn't work.
1.1       abs         6:
1.123     jmc         7: For a more detailed description of the recommended way to build NetBSD
                      8: using build.sh, see the BUILDING file.
                      9:
                     10: Note that much of the advice in this UPDATING file was written before
                     11: build.sh existed.  Nevertheless, the advice here may be useful for
                     12: working around specific problems with build.sh.
                     13:
                     14: See also: BUILDING, build.sh, Makefile.
1.1       abs        15:
                     16: Recent changes:
                     17: ^^^^^^^^^^^^^^^
1.138     lukem      18:
1.203     dyoung     19: 20091101:
1.205     dholland   20:         After updating, it may be necessary to make the 'cleandir'
                     21:         target in src/tools/yacc/ and in src/usr.bin/yacc/ before a
                     22:         'build.sh -u tools' or 'build.sh -u distribution'.  Ditto
                     23:         src/tools/lex/ and src/usr.bin/lex/.
1.203     dyoung     24:
1.202     mrg        25: 20091001:
1.206   ! dholland   26:        On amd64 you must rebuild tools (to get the new binutils)
        !            27:        before building a kernel, or the build fails on cpufunc.S.
        !            28:
        !            29: 20091001:
1.202     mrg        30:        An error will create a ./usr/X11R7/lib/X11/xkb/compiled/xkb
                     31:        symlink, failing the build.  Delete the link, and the subdir
                     32:        it is in, and retry your build.
                     33:
1.201     dsl        34: 20090718:
                     35:        libc build changed so that strchr() provides the extra entry
                     36:        point for index(). Update build of libc.a (and libc_pic.a)
                     37:        may fail because the archive contains the unwanted index.o.
                     38:        (Similarly for strrchr() and rindex().)
                     39:
1.198     mrg        40: 20090709:
                     41:        Native Xorg was upgraded again.  Builds will probably fail again
                     42:        without a clean objdir, at least for src/external/mit/xorg.
                     43:
1.197     mrg        44: 20090616:
                     45:        Native Xorg was upgraded.  Builds will need a clean objdir for
                     46:        src/external/mit/xorg.  Upgrading a system from sets will not
                     47:        work properly yet as the /usr/X11R7/lib/X11/xkb/symbols/pc
                     48:        subdirectory has been changed into a file, and this needs to
                     49:        be manually "rm -r"'ed before installing xbase.tgz.
                     50:
1.195     perry      51: 20090501:
                     52:        Several new functions were added to string.h/libc, and this
                     53:        can cause autoconf problems during the tool build for people
                     54:        who fail to clean out their tools objects properly. If you
                     55:        note messages about stpcpy, stpncpy or strnlen accompanying a
                     56:        failure during the tool build, clean out all your tools
                     57:        objects and start again.
                     58:
1.194     mrg        59: 20090325:
                     60:        The i386 port was switched to i486 default toolchain.  This requires
                     61:        cleaning your src/tools directory and $TOOLDIR and rebuilding them.
                     62:
1.192     skrll      63: 20090126:
1.193     skrll      64:        The __posix_fadvise50 system call changed assembly stub type. You need to
                     65:        'rm -f __posix_fadvise50.*' in the libc build directory to avoid using
1.192     skrll      66:        the old assembly stub.
                     67:
1.191     joerg      68: 20090202:
                     69:        pkg_install now depends on the pkgdb cache for automatic conflict
                     70:        detection.  It is recommented to rebuild the cache with
                     71:        ``pkg_admin rebuild''.
                     72:
1.184     christos   73: 20090110:
                     74:        time_t and dev_t have been bumped to 64 bit quantities. To upgrade:
                     75:        1. Make sure your kernel has COMPAT_50 in it. Build and install.
1.188     christos   76:           This is needed even in the MODULAR kernel because there is
                     77:           conditionally compiled code in rtsock.c.
1.184     christos   78:        2. make sure build.sh completes and the binaries in a chroot work
                     79:           before installing.
                     80:        3. If you don't use build.sh and you build directly to root, and
1.187     dholland   81:           your build breaks in the middle, don't despair. Make sure headers
1.184     christos   82:           are installed properly, and start building libraries first libc
                     83:           and libutil, install them and then continue building all the
                     84:           libraries in src/lib and src/gnu/lib and install them. Once
                     85:           the new libraries are installed, you can restart the build.
                     86:        4. If you compile packages and you notice link time warnings,
1.189     hubertf    87:           rebuild the required packages to update their shared libraries.
                     88:           Any package you rebuild will require rebuilding all the packages
                     89:           that depend on it.
1.186     christos   90:        5. Next time you run pwd_mkdb with the new binary, the file
                     91:           will be upgraded and it will not be backwards compatible.
1.190     apb        92:        6. The utmpx/wtmpx files (/var/run/utmpx and /var/log/wtmpx, see
                     93:           lastlogx(5)) have been versioned, and there is a heuristic
                     94:           for utmp. You are better off removing the old files after
                     95:           upgrading.  The automated clearing of /var/run during
                     96:           boot, and the automated rotating of files in /var/log by
                     97:           newsyslog(8), may mean that you do not have to remove the
                     98:           files manually.
                     99:        7. The optional accounting file (/var/account/acct, see
                    100:           accton(8)) has not been versioned, and will need to be
                    101:           removed.  The automatic rotation of the accounting file by
                    102:           /etc/daily limits the bad consequences of failure to remove
                    103:           the file.
1.196     dholland  104:        8. Application software that writes time_t to binary files on
                    105:           disk will break or need attention. Most notably: if you are
                    106:           using PostgreSQL < 8.4, you need to dump your databases,
                    107:           rebuild PostgreSQL with the new time_t, then restore.
1.185     jmcneill  108:
1.183     pgoyette  109: 20081219:
                    110:        config(1) has been updated, and one of the files it creates -
                    111:        swapnetbsd.o - has changed format.  You need to rebuild config
                    112:        (done automatically by build.sh) and then you need to rerun
                    113:        config on all kernel configuration files before rebuilding those
                    114:        kernels.
                    115:
1.181     cube      116: 20081205:
                    117:        If you build with MKX11=no, you should remove /etc/rc.d/xdm and
                    118:        /etc/rc.d/xfs from DESTDIR because those files were moved to the xetc
                    119:        set and will appear as extra files for MKX11=no update builds.
1.178     lukem     120:
1.179     tsutsui   121: 20081122:
1.182     tsutsui   122:        On i386, various kernel options(4) in GENERIC including
1.180     wiz       123:        file systems have been disabled and moved into kernel modules.
                    124:        Before trying a new GENERIC kernel, you have to prepare the
1.179     tsutsui   125:        following files as well as a new GENERIC kernel:
                    126:
                    127:        - build and install kernel modules from src/sys/modules
                    128:
                    129:        - install the latest bootloader, which will load a module
1.180     wiz       130:          for the file system from which the kernel is loaded automatically
1.179     tsutsui   131:
1.180     wiz       132:        If you have to load your kernel from a file system which is not of
                    133:        the same type as the root file system, you have to load the necessary
                    134:        file system module manually on the boot prompt or in the boot.cfg file.
1.179     tsutsui   135:
1.178     lukem     136: 20080827:
                    137:        If you built and installed a libc from sources between
                    138:        2008/08/20 and 2008/08/26 you got a broken strtouq(3)
                    139:        which results in false errors reported by lint(1).
                    140:        Since this breaks the libc build itself, manual help is
1.180     wiz       141:        needed -- lint must be disabled temporarily, e.g.:
1.178     lukem     142:          $ (cd lib/libc && make MKLINT=no dependall install)
                    143:
1.177     christos  144: 20080813:
                    145:        MKDEBUG build was broken because the .depend files did not know
                    146:        about .go files. You need to remove all .depend files and rebuild.
                    147:
1.200     dholland  148: 20080802:
                    149:        A regression in binary compatibility for pthread_mutex_t has
                    150:        been fixed. Unfortunately, the price is breaking compatibility
                    151:        for -current.
                    152:
                    153:        Threaded programs (using libpthread) and C++ programs (using
                    154:        libstdc++) compiled after 20070907 and before 20080802 need to
                    155:        be recompiled.
                    156:
                    157:        One way to find affected pkgsrc packages:
                    158:
                    159:          $ grep REQUIRES=/usr/lib/libpthread /var/db/pkg/*/+BUILD_INFO
                    160:          $ grep REQUIRES=/usr/lib/libstdc++ /var/db/pkg/*/+BUILD_INFO
                    161:
1.175     simonb    162: 20080731:
                    163:        WAPBL (metadata journaling support) has been added, but at this
                    164:        time isn't backwards compatible with pre-WAPBL aware kernels
                    165:        and userland (fsck_ffs in particular).  Please make sure you
                    166:        don't use a journaled filesystem with an older kernel/userland,
1.176     simonb    167:        especially an uncleanly mounted journaled filesystem.  WAPBL
                    168:        also requires the super block to be in the UFS2 format.  You
                    169:        can use fsck_ffs -c 4 to update the superblock format.
1.175     simonb    170:
1.174     lukem     171: 20080721:
                    172:        Assembler warnings are now fatal if $WARNS>0 and $NOGCCERROR
                    173:        isn't defined.
                    174:
1.173     freza     175: 20080531:
                    176:        The ioctl number of DRVSUSPENDDEV command on /dev/drvctl changed
                    177:        from 125 (conflicted with DRVCTLCOMMAND) to 129. The drvctl(8)
                    178:        utility needs to be rebuilt and reinstalled as older binaries
                    179:        won't work correctly. The following sequence of commands:
                    180:
                    181:          $ (cd sys/sys/ && nbmake-$arch includes)
                    182:          $ (cd sbin/drvctl/ && nbmake-$arch clean)
                    183:          $ (cd sbin/drvctl/ && nbmake-$arch all)
                    184:
                    185:        leaves new drvctl utility in sbin/drvctl build directory.
                    186:
1.172     lukem     187: 20080503:
                    188:        The <bsd.lib.mk> variable MKPRIVATELIB was renamed to LIBISPRIVATE.
                    189:
1.171     he        190: 20080521:
                    191:        For a while, unprivileged UPDATE builds would fail to
                    192:        succeed at the checkflist stage, complaining that
                    193:        ${DESTDIR}/stand/<arch>/ did not exist.  A fix for this
                    194:        problem was committed to share/mk/bsd.kmodule.mk, revision 1.9.
                    195:        If you already hit this problem, update the .mk file,
                    196:        remove ${DESTDIR}/stand/<arch>, and re-run the build.
                    197:
1.174     lukem     198: 20080303:
                    199:        Linker warnings are now fatal if $WARNS>0.
                    200:
1.170     christos  201: 20080126:
                    202:        The posix_fadvise system call has been changed from an assembly
                    203:        stub, to a c file that calls an assembly stub. You need to
                    204:        'rm -f posix_fadvise.* .depend' in the libc build directory to
                    205:        avoid using the old assembly stub.
                    206:
1.168     joerg     207: 20071209:
                    208:        The acpiec(4) driver has been split into two attachments. If you
                    209:        get ACPI errors before the attachment, please update your kernel
1.169     wiz       210:        configuration file appropriately or see GENERIC for more details.
1.168     joerg     211:
1.166     xtraeme   212: 20071115:
                    213:        The it(4) driver has been renamed to itesio(4) and the old port
                    214:        argument specified in the kernel configuration file is not valid
                    215:        anymore. The itesio(4) driver now uses the Super I/O address port
                    216:        rather than the EC address port. Please update your kernel
1.167     wiz       217:        configuration file appropriately or see GENERIC for more details.
1.166     xtraeme   218:
1.165     jmmv      219: 20071028:
                    220:        The pccons(4) driver has been removed from the NetBSD/shark port.
                    221:        You need to update any custom kernel configuration file you have
                    222:        to remove any references to pccons (which includes removing the
                    223:        now useless XSERVER option) and replace them with the correct
                    224:        entries for the wscons driver.  See the GENERIC configuration file
                    225:        for more details.
                    226:
1.164     gdt       227: 20070913:
                    228:        A latent bug in dhclient/dhcpd that caused it to be unable to
                    229:        enumerate interfaces was fixed.  The bug began to cause
                    230:        problems after 20070911 when the kernel's SIOCGIFCONF
                    231:        implementation was repaired.  From 20070529 to 20070911 racoon
                    232:        could not enumerate interfaces.  (These are noted because
                    233:        normal kernel/userspace version matching hygiene is not
                    234:        sufficient to avoid this problem.)  Ensure that both kernel
                    235:        and userland are from after 20070913.
                    236:
1.163     joerg     237: 20070703:
1.199     dholland  238:        nbinstall has been renamed ${MACHINE_GNU_ARCH}-install. It
                    239:        calls the target-specific strip program, and the logic to pass
                    240:        down STRIP from make has been removed.  This requires a
                    241:        re-installation of tools.
1.163     joerg     242:
1.161     dsl       243: 20070422:
                    244:        The way OS emulations lookup filenames inside the emulation root
                    245:        has been changed.  Rather than modify the pathname (and copy back
                    246:        to userspace) namei() and lookup() directly check the emulation
                    247:        root. One side effect is that absolute symlinks inside the emulated
1.167     wiz       248:        root file system will be relative to that file system - unless they
1.161     dsl       249:        start /../ this is useful when the emulated root is a real install
                    250:        that has such links.
                    251:        This might affect symlinks that have been added to reference outside
                    252:        the emulated root.
                    253:
1.160     jmcneill  254: 20070412:
                    255:        The pckbc driver on sgimips IP32 has been removed. Use macekbc
                    256:        instead. See the GENERIC32_IP3x kernel configuration for an
                    257:        example.
                    258:
1.159     gdt       259: 20070319:
                    260:         src/lib/libc/Makefile revision 1.129 broke libc and ld.elf_so
                    261:         on many platforms due to incorrect flags settings.  If you
                    262:         updated and built after about 20070315, do "nbmake-$arch
                    263:        cleandir" in src/lib/libc and src/libexec/ld.elf_so to force a
                    264:        rebuild of object files that might have been built
                    265:        incorrectly, and ensure that you have at least
                    266:        src/lib/libc/Makefile 1.130.
                    267:
1.158     dbj       268: 20070210:
                    269:         src/sys/sys/{sa.h,savar.h} were removed.
                    270:           find ${OBJDIR} \( -name .depend -o -name '*.d' \) -print \
                    271:               | xargs egrep -l '/sa.h|/savar.h' | xargs rm
                    272:         will allow dependencies on those files to get get rebuilt
                    273:
1.157     apb       274: 20070209:
                    275:         The threading model was changed when the newlock2 branch
                    276:         was merged to NetBSD-current.  If you boot with a new
                    277:         kernel (version 4.99.10), then you also need a new pthread
                    278:         library (/usr/lib/libpthread.so.0.7).  If you boot with
                    279:         an old kernel, then you need the old pthread library
                    280:         (/usr/lib/libpthread.so.0.6).  Provided you keep the kernel and
                    281:         the pthread library in sync, old threaded applications should
                    282:         continue to work with an old or new kernel.  Note that named(8)
                    283:        is the only threaded application in the base system.
                    284:
1.154     he        285: 20061214:
                    286:        Following the move of string_to_flags() and flags_to_string()
                    287:        from the bin/ls/ sources to libutil, users doing UPDATE builds
                    288:        will need to do a "make cleandir" in
                    289:                tools/mtree/, tools/makefs/, tools/binstall/, tools/pax/,
                    290:                bin/pax/, bin/ls/, usr.sbin/mtree/, usr.sbin/makefs/,
1.156     he        291:                usr.bin/xinstall/, libexec/ftpd/, rescue/, as well
                    292:                as the installation images in distrib/
1.154     he        293:        in order to excise stale references to the old stat_flags.h header
                    294:        file in the ls sources -- stat_flags.h has been removed.
                    295:
1.152     christos  296: 20061108:
                    297:        The configure script used in the src/tools/gcc compiler has been
                    298:        changed to indicate that our libc has ssp support built-in and
                    299:        does not depend on -lssp and -lssp-nonshared. You'll need to
                    300:        make clean in src/tools/gcc first to rebuild the compiler.
                    301:
1.151     rpaulo    302: 20061009:
                    303:        The sysctl variables net.inet{,6}.tcp{,6}.newreno are no longer
                    304:        available. Use net.inet{,6}.tcp{,6}.congctl.selected instead.
                    305:
1.150     bjh21     306: 20060814:
                    307:        The vt, vidcconsole, kbd, and rpckbd drivers on acorn32 have been
                    308:        withdrawn.  Use vidcvideo and pckbd instead.  See the GENERIC
                    309:        kernel configuration for an example.  X servers from the last
                    310:        few years should cope.
                    311:
1.149     christos  312: 20060703:
                    313:        MPACPI is no more. We always configure PCI interrupts using ACPI
                    314:        if we have an ACPI kernel. The option MPACPI_SCANPCI has been renamed
                    315:        to ACPI_SCANPCI. Thanks to work from fvdl.
                    316:
1.148     dogcow    317: 20060627:
                    318:        socket(2) has changed, and its system call has been versioned.
                    319:        For userlands with the old version of socket(2), make sure that
                    320:        your kernel has 'options COMPAT_30' set, or else 'bad system call'
                    321:        errors will result.
                    322:
1.1       abs       323: Hints for a more successful build:
                    324: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1.123     jmc       325:     Use build.sh, but do not use its "expert mode":
1.132     jmmv      326:        This will automatically build the tools in the
1.123     jmc       327:           correct order, and it will keep the tools and the
                    328:           new build products from interfering with the running
                    329:           system.  This will allow you to ignore most of the
                    330:           other advice in this file.
1.2       mrg       331:     Build a new kernel first:
                    332:        This makes sure that any new system calls or features
                    333:           expected by the new userland will be present.  This
                    334:           helps to avoid critical errors when upgrading.
1.1       abs       335:     Use object directories:
                    336:        This helps to keep stale object
                    337:           files from polluting the build if a Makefile "forgets"
                    338:           about one.  It also makes it easier to clean up after
                    339:           a build.  It's also necessary if you want to use the
                    340:           same source tree for multiple machines.
1.123     jmc       341:           To use object directories with build.sh:
                    342:            a) invoke build.sh with the "-M" or "-O" options.
                    343:           To use object directories without using build.sh:
1.1       abs       344:            a) cd /usr/src ; make cleandir
1.2       mrg       345:            b) Add "OBJMACHINE=yes" to /etc/mk.conf
                    346:            c) Add "MKOBJDIRS=yes" to /etc/mk.conf
1.1       abs       347:            d) cd /usr/src ; make build
1.2       mrg       348:           Note that running "make obj" in a directory will create
                    349:           in obj.$MACHINE directory.
1.1       abs       350:     Build to a DESTDIR:
1.123     jmc       351:        This helps to keep old installed files (especially libraries)
                    352:           from interfering with the new build.
                    353:           To build to a DESTDIR with build.sh, use the "-D" option.
                    354:           To build to a DESTDIR without using build.sh, set the DESTDIR
                    355:           environment variable before running make build.  It should be
                    356:           set to the pathname of an initially empty directory.
                    357:           Problems: if you do not use build.sh, you might need to
                    358:                update critical utilities without using DESTDIR since
                    359:                nothing is executed from what is installed in DESTDIR.
                    360:                (See critical utils, below.)
1.1       abs       361:     Build often:
                    362:        This keeps critical utilities current enough to not choke
                    363:        on any other part of the source tree that depends on up to
1.123     jmc       364:        date functionality.  If you use build.sh, you should not have
                    365:        this problem.
1.1       abs       366:
                    367: What to do if things don't work:
                    368: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    369: When things don't work there is usually a few things that commonly
                    370: should be done.
                    371:     1) make includes
                    372:        This should be done automatically by make build.
                    373:     2)  cd share/mk && make install
                    374:        Again, automatically done by make build.
                    375:
                    376: Failsafe rebuild of a small part of the tree:
                    377: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    378: To make sure you rebuild something correctly you want to do
                    379: something like the following:
                    380:     1)  Make sure the includes and .mk files are up to date.
                    381:     2)  Make sure any program used to build the particular
                    382:        utility is up to date.  (yacc, lex, etc...)
                    383:     3)  cd ...path/to/util...
                    384:        make cleandir
                    385:        rm ...all obj directories...
                    386:        make cleandir                   # yes, again
                    387:        make obj
                    388:        make depend && make
                    389:
                    390: Failsafe rebuild of the entire tree:
                    391: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    392: If you really want to make sure the source tree is clean and
1.2       mrg       393: ready for a build try the following.  Note that sourcing /etc/mk.conf
                    394: (a make(1) Makefile) in this manner is not right, and will not work
                    395: for anyone who uses any make(1) features in /etc/mk.conf.
1.1       abs       396:
                    397: ---cut here---
                    398: #!/bin/sh
                    399: . /etc/mk.conf
                    400:
1.58      lukem     401: if [ -z $NETBSDSRCDIR ] ; then
                    402:     NETBSDSRCDIR=/usr/src
1.1       abs       403: fi
1.58      lukem     404: if [ \! -d $NETBSDSRCDIR ] ; then
1.1       abs       405:     echo Unable to find sources
                    406:     exit 1
                    407: fi
1.58      lukem     408: find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \;
1.1       abs       409:
                    410: if [ -z $BSDOBJDIR ] ; then
                    411:     BSDOBJDIR=/usr/obj
                    412: fi
                    413: if [ -d $BSDOBJDIR ] ; then
                    414:     rm -rf $BSDOBJDIR
                    415: fi
                    416:
1.58      lukem     417: cd $NETBSDSRCDIR && make cleandir
1.1       abs       418:
                    419: ---cut here---
                    420:
                    421: Critical utilities:
                    422: ^^^^^^^^^^^^^^^^^^^
1.3       itojun    423:        usr.bin/compile_et
1.1       abs       424:        usr.bin/make
                    425:        usr.bin/yacc
                    426:        usr.bin/lex
1.11      lukem     427:        usr.bin/xlint
1.142     drochner  428:        usr.bin/config
1.1       abs       429:
1.34      simonb    430: Other problems and possible solutions:
1.1       abs       431: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    432: Symptom:Complaints involving a Makefile.
1.17      erh       433: Fix:   Rebuild usr.bin/make:
                    434:        cd usr.bin/make && make && make install
1.111     simonb    435:        Or, a failsafe method if that doesn't work:
1.17      erh       436:        cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin
                    437:
1.1       abs       438: Fix:   Make sure .mk files are up to date.
                    439:        cd share/mk && make install
1.2       mrg       440:
                    441: Symptom:Kernel `config' fails to configure any kernel, including GENERIC.
1.142     drochner  442: Fix:   Rebuild usr.bin/config
1.1       abs       443:
                    444: Symptom:
                    445: Fix:   Rebuild usr.bin/yacc
                    446:
                    447: Symptom:
                    448: Fix:   Rebuild usr.bin/lex
                    449:
                    450: Symptom:
                    451: Fix:   rm /usr/lib/libbfd.a
1.4       itojun    452:
                    453: Symptom:Obsolete intermediate files are used during compilation
                    454: Fix:   Try the following sequence of commands in the directory in question.
                    455:        make cleandir; rm `make print-objdir`; make cleandir; make obj
                    456:        (If you built the tree without "make obj" in the past, obsolete files
                    457:        may remain.  The command tries to clean everything up)
1.5       wiz       458:
                    459: Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type
                    460: Fix:   Rebuild and install usr.bin/menuc
1.12      itojun    461:
                    462: Symptom:mklocale not found during build in share/locale/ctype
                    463: Fix:   Build and install usr.bin/mklocale
1.13      dogcow    464:
1.86      kleink    465: Symptom:undefined reference to `__assert13' or `__unsetenv13'
1.13      dogcow    466: Fix:    Rebuild and install lib/libc
                    467:
1.142     drochner  468: Symptom:usr.bin/config fails to build.
1.19      cgd       469: Fix:   Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile.
1.13      dogcow    470:
1.19      cgd       471: Symptom:undefined reference to `getprogname' or `setprogname'
                    472: Fix:    Rebuild and install lib/libc
1.24      abs       473:
                    474: Symptom:lint does not understand the '-X' option
                    475: Fix:    May need to build & install libs with NOLINT=1 before rebuilding lint

CVSweb <webmaster@jp.NetBSD.org>